From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 8/9] imx6: isiotmx6ul: Add nandboot env support
Date: Fri, 27 Jan 2017 09:54:46 +0100 [thread overview]
Message-ID: <1485507287-3327-9-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1485507287-3327-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add config options for booting Linux from NAND in UBI format.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
configs/imx6ul_isiot_nand_defconfig | 1 +
include/configs/imx6ul_isiot.h | 32 +++++++++++++++++++++++++++++++-
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
index 2af146f..d1a9fad 100644
--- a/configs/imx6ul_isiot_nand_defconfig
+++ b/configs/imx6ul_isiot_nand_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_PROMPT="isiotmx6ul> "
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_UBI=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
index b137848..10311d0 100644
--- a/include/configs/imx6ul_isiot.h
+++ b/include/configs/imx6ul_isiot.h
@@ -48,9 +48,12 @@
"mmcdev=0\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
+ "ubiargs=setenv bootargs console=${console},${baudrate} " \
+ "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
@@ -75,8 +78,21 @@
"fi; " \
"else " \
"bootm; " \
- "fi\0"
+ "fi\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "if mtdparts; then " \
+ "echo Starting nand boot ...; " \
+ "else " \
+ "mtdparts default; " \
+ "fi; " \
+ "run ubiargs; " \
+ "nand read ${loadaddr} kernel 0x800000; " \
+ "nand read ${fdt_addr} dtb 0x100000; " \
+ "bootm ${loadaddr} - ${fdt_addr}\0"
+#ifdef CONFIG_NAND_MXS
+# define CONFIG_BOOTCOMMAND "run nandboot"
+#else
# define CONFIG_BOOTCOMMAND \
"if mmc rescan; then " \
"if run loadbootscript; then " \
@@ -91,6 +107,7 @@
"fi; " \
"fi; " \
"fi"
+#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
@@ -141,6 +158,19 @@
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+/* MTD device */
+# define CONFIG_MTD_DEVICE
+# define CONFIG_CMD_MTDPARTS
+# define CONFIG_MTD_PARTITIONS
+# define MTDIDS_DEFAULT "nand0=gpmi-nand"
+# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
+ "1m(env),8m(kernel),1m(dtb),-(rootfs)"
+
+/* UBI */
+# define CONFIG_CMD_UBIFS
+# define CONFIG_RBTREE
+# define CONFIG_LZO
+
/* APBH DMA */
# define CONFIG_APBH_DMA
# define CONFIG_APBH_DMA_BURST
--
1.9.1
next prev parent reply other threads:[~2017-01-27 8:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 8:54 [U-Boot] [PATCH v4 0/9] imx6ul: Add Engicam Is.IoT MX6UL support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 1/9] configs: imx6: Don't define USDHC2_BASE_ADDR Jagan Teki
2017-01-27 12:27 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 2/9] arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support Jagan Teki
2017-01-27 12:38 ` Stefano Babic
2017-01-27 15:55 ` Jagan Teki
2017-01-28 12:25 ` Stefano Babic
2017-01-28 12:39 ` Michael Nazzareno Trimarchi
2017-01-30 9:41 ` Jagan Teki
2017-01-30 10:14 ` Stefano Babic
2017-01-28 13:43 ` Tom Rini
2017-01-27 8:54 ` [U-Boot] [PATCH v4 3/9] arm: dts: imx6ul-isiot: Add I2C nodes Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 4/9] imx6: isiotmx6ul: Add I2C support Jagan Teki
2017-01-27 14:18 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 5/9] arm: dts: imx6ul-isiot: Add FEC node Jagan Teki
2017-01-27 14:18 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 6/9] imx6: isiotmx6ul: Add FEC support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 7/9] imx6: isiotmx6ul: Add NAND support Jagan Teki
2017-01-27 8:54 ` Jagan Teki [this message]
2017-01-27 8:54 ` [U-Boot] [PATCH v4 9/9] imx6ul: isiotmx6ul: Enable I2C support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485507287-3327-9-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.