From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 6/9] imx6: isiotmx6ul: Add FEC support
Date: Fri, 27 Jan 2017 09:54:44 +0100 [thread overview]
Message-ID: <1485507287-3327-7-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1485507287-3327-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add FEC support for Engicam Is.IoT MX6UL module.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/cpu/armv7/mx6/Kconfig | 1 +
configs/imx6ul_isiot_mmc_defconfig | 3 +++
include/configs/imx6ul_isiot.h | 10 ++++++++++
3 files changed, 14 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index b81e18c..46b2b59 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -210,6 +210,7 @@ config TARGET_MX6UL_ISIOT
select MX6UL
select OF_CONTROL
select DM
+ select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
index 7a7be23..8ecdd8e 100644
--- a/configs/imx6ul_isiot_mmc_defconfig
+++ b/configs/imx6ul_isiot_mmc_defconfig
@@ -23,6 +23,8 @@ CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
@@ -32,6 +34,7 @@ CONFIG_CMD_FS_GENERIC=y
# CONFIG_BLK is not set
CONFIG_SYS_I2C_MXC=y
# CONFIG_DM_MMC_OPS is not set
+CONFIG_FEC_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
index aba43fc..5a3e05a 100644
--- a/include/configs/imx6ul_isiot.h
+++ b/include/configs/imx6ul_isiot.h
@@ -128,6 +128,16 @@
# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
+/* Ethernet */
+#ifdef CONFIG_FEC_MXC
+# define CONFIG_FEC_MXC_PHYADDR 0
+# define CONFIG_FEC_XCV_TYPE RMII
+
+# define CONFIG_MII
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_SMSC
+#endif
+
/* SPL */
#ifdef CONFIG_SPL
# define CONFIG_SPL_MMC_SUPPORT
--
1.9.1
next prev parent reply other threads:[~2017-01-27 8:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 8:54 [U-Boot] [PATCH v4 0/9] imx6ul: Add Engicam Is.IoT MX6UL support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 1/9] configs: imx6: Don't define USDHC2_BASE_ADDR Jagan Teki
2017-01-27 12:27 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 2/9] arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support Jagan Teki
2017-01-27 12:38 ` Stefano Babic
2017-01-27 15:55 ` Jagan Teki
2017-01-28 12:25 ` Stefano Babic
2017-01-28 12:39 ` Michael Nazzareno Trimarchi
2017-01-30 9:41 ` Jagan Teki
2017-01-30 10:14 ` Stefano Babic
2017-01-28 13:43 ` Tom Rini
2017-01-27 8:54 ` [U-Boot] [PATCH v4 3/9] arm: dts: imx6ul-isiot: Add I2C nodes Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 4/9] imx6: isiotmx6ul: Add I2C support Jagan Teki
2017-01-27 14:18 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 5/9] arm: dts: imx6ul-isiot: Add FEC node Jagan Teki
2017-01-27 14:18 ` Stefano Babic
2017-01-27 8:54 ` Jagan Teki [this message]
2017-01-27 8:54 ` [U-Boot] [PATCH v4 7/9] imx6: isiotmx6ul: Add NAND support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 8/9] imx6: isiotmx6ul: Add nandboot env support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 9/9] imx6ul: isiotmx6ul: Enable I2C support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485507287-3327-7-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.