All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [u-boot PATCH v2 4/8] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
Date: Mon, 30 Jan 2017 17:15:12 +0200	[thread overview]
Message-ID: <1485789316-22216-5-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1485789316-22216-1-git-send-email-rogerq@ti.com>

Use the same convention that was used for ICSS1 Ethernet
- If pin is output, set as PIN_OUTPUT
- If pin is input and external pull resistor present set as PIN_INPUT
- If pin is input and external pull resistor absent, set pull to same
as that of the external PHY's internall pull.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 board/ti/am57xx/mux_data.h | 62 +++++++++++++++++++++++-----------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index ff0e517..5485212 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -586,46 +586,46 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
 	{GPIO6_14, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_14.gpio6_14 */
 	{GPIO6_15, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_15.gpio6_15 */
 	{GPIO6_16, (M14 | PIN_INPUT_PULLDOWN)},	/* gpio6_16.gpio6_16 */
-	{XREF_CLK0, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk0.pr2_mii1_col */
-	{XREF_CLK1, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk1.pr2_mii1_crs */
+	{XREF_CLK0, (M11 | PIN_INPUT)},	/* xref_clk0.pr2_mii1_col */
+	{XREF_CLK1, (M11 | PIN_INPUT_PULLUP)},	/* xref_clk1.pr2_mii1_crs */
 	{XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)},	/* xref_clk2.gpio6_19 */
 	{XREF_CLK3, (M15 | PIN_INPUT_PULLDOWN)},	/* xref_clk3.Driveroff */
 	{MCASP1_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp1_aclkx.pr2_mdio_mdclk */
 	{MCASP1_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_fsx.pr2_mdio_data */
 	{MCASP1_ACLKR, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_aclkr.gpio5_0 */
 	{MCASP1_FSR, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_fsr.gpio5_1 */
-	{MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr0.pr2_mii0_rxer */
-	{MCASP1_AXR1, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr1.pr2_mii_mt0_clk */
+	{MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP)},	/* mcasp1_axr0.pr2_mii0_rxer */
+	{MCASP1_AXR1, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr1.pr2_mii_mt0_clk */
 	{MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr2.gpio5_4 */
 	{MCASP1_AXR3, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr3.gpio5_5 */
 	{MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr4.gpio5_6 */
 	{MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr5.gpio5_7 */
 	{MCASP1_AXR6, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr6.gpio5_8 */
 	{MCASP1_AXR7, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr7.gpio5_9 */
-	{MCASP1_AXR8, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr8.pr2_mii0_txen */
-	{MCASP1_AXR9, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr9.pr2_mii0_txd3 */
-	{MCASP1_AXR10, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr10.pr2_mii0_txd2 */
-	{MCASP1_AXR11, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr11.pr2_mii0_txd1 */
-	{MCASP1_AXR12, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr12.pr2_mii0_txd0 */
-	{MCASP1_AXR13, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr13.pr2_mii_mr0_clk */
-	{MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)},	/* mcasp1_axr14.pr2_mii0_rxdv */
-	{MCASP1_AXR15, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr15.pr2_mii0_rxd3 */
-	{MCASP2_ACLKX, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_aclkx.pr2_mii0_rxd2 */
-	{MCASP2_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_fsx.pr2_mii0_rxd1 */
+	{MCASP1_AXR8, (M11 | PIN_OUTPUT)},	/* mcasp1_axr8.pr2_mii0_txen */
+	{MCASP1_AXR9, (M11 | PIN_OUTPUT)},	/* mcasp1_axr9.pr2_mii0_txd3 */
+	{MCASP1_AXR10, (M11 | PIN_OUTPUT)},	/* mcasp1_axr10.pr2_mii0_txd2 */
+	{MCASP1_AXR11, (M11 | PIN_OUTPUT)},	/* mcasp1_axr11.pr2_mii0_txd1 */
+	{MCASP1_AXR12, (M11 | PIN_OUTPUT)},	/* mcasp1_axr12.pr2_mii0_txd0 */
+	{MCASP1_AXR13, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr13.pr2_mii_mr0_clk */
+	{MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr14.pr2_mii0_rxdv */
+	{MCASP1_AXR15, (M11 | PIN_INPUT)},	/* mcasp1_axr15.pr2_mii0_rxd3 */
+	{MCASP2_ACLKX, (M11 | PIN_INPUT)},	/* mcasp2_aclkx.pr2_mii0_rxd2 */
+	{MCASP2_FSX, (M11 | PIN_INPUT)},	/* mcasp2_fsx.pr2_mii0_rxd1 */
 	{MCASP2_ACLKR, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_aclkr.Driveroff */
 	{MCASP2_FSR, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_fsr.Driveroff */
 	{MCASP2_AXR0, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr0.Driveroff */
 	{MCASP2_AXR1, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr1.Driveroff */
-	{MCASP2_AXR2, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_axr2.pr2_mii0_rxd0 */
-	{MCASP2_AXR3, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)},	/* mcasp2_axr3.pr2_mii0_rxlink */
+	{MCASP2_AXR2, (M11 | PIN_INPUT)},	/* mcasp2_axr2.pr2_mii0_rxd0 */
+	{MCASP2_AXR3, (M11 | PIN_INPUT)},	/* mcasp2_axr3.pr2_mii0_rxlink */
 	{MCASP2_AXR4, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr4.gpio1_4 */
 	{MCASP2_AXR5, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr5.gpio6_7 */
 	{MCASP2_AXR6, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr6.gpio2_29 */
 	{MCASP2_AXR7, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr7.gpio1_5 */
-	{MCASP3_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp3_aclkx.pr2_mii0_crs */
-	{MCASP3_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp3_fsx.pr2_mii0_col */
-	{MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr0.pr2_mii1_rxer */
-	{MCASP3_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr1.pr2_mii1_rxlink */
+	{MCASP3_ACLKX, (M11 | PIN_INPUT_PULLUP)},	/* mcasp3_aclkx.pr2_mii0_crs */
+	{MCASP3_FSX, (M11 | PIN_INPUT)},	/* mcasp3_fsx.pr2_mii0_col */
+	{MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP)},	/* mcasp3_axr0.pr2_mii1_rxer */
+	{MCASP3_AXR1, (M11 | PIN_INPUT)},	/* mcasp3_axr1.pr2_mii1_rxlink */
 	{MCASP4_ACLKX, (M2 | PIN_INPUT_PULLDOWN)},	/* mcasp4_aclkx.spi3_sclk */
 	{MCASP4_FSX, (M2 | PIN_INPUT_PULLDOWN)},	/* mcasp4_fsx.spi3_d1 */
 	{MCASP4_AXR0, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp4_axr0.Driveroff */
@@ -642,18 +642,18 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
 	{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat3.mmc1_dat3 */
 	{MMC1_SDCD, (M14 | PIN_INPUT_PULLUP)},	/* mmc1_sdcd.gpio6_27 */
 	{MMC1_SDWP, (M0 | PIN_OUTPUT)},	/* mmc1_sdwp.mmc1_sdwp */
-	{GPIO6_10, (M11 | PIN_INPUT_PULLUP)},	/* gpio6_10.pr2_mii_mt1_clk */
-	{GPIO6_11, (M11 | PIN_INPUT_PULLUP)},	/* gpio6_11.pr2_mii1_txen */
-	{MMC3_CLK, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_clk.pr2_mii1_txd3 */
-	{MMC3_CMD, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_cmd.pr2_mii1_txd2 */
-	{MMC3_DAT0, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat0.pr2_mii1_txd1 */
-	{MMC3_DAT1, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat1.pr2_mii1_txd0 */
-	{MMC3_DAT2, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat2.pr2_mii_mr1_clk */
+	{GPIO6_10, (M11 | PIN_INPUT_PULLDOWN)},	/* gpio6_10.pr2_mii_mt1_clk */
+	{GPIO6_11, (M11 | PIN_OUTPUT)},	/* gpio6_11.pr2_mii1_txen */
+	{MMC3_CLK, (M11 | PIN_OUTPUT)},	/* mmc3_clk.pr2_mii1_txd3 */
+	{MMC3_CMD, (M11 | PIN_OUTPUT)},	/* mmc3_cmd.pr2_mii1_txd2 */
+	{MMC3_DAT0, (M11 | PIN_OUTPUT)},	/* mmc3_dat0.pr2_mii1_txd1 */
+	{MMC3_DAT1, (M11 | PIN_OUTPUT)},	/* mmc3_dat1.pr2_mii1_txd0 */
+	{MMC3_DAT2, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat2.pr2_mii_mr1_clk */
 	{MMC3_DAT3, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat3.pr2_mii1_rxdv */
-	{MMC3_DAT4, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat4.pr2_mii1_rxd3 */
-	{MMC3_DAT5, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat5.pr2_mii1_rxd2 */
-	{MMC3_DAT6, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat6.pr2_mii1_rxd1 */
-	{MMC3_DAT7, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat7.pr2_mii1_rxd0 */
+	{MMC3_DAT4, (M11 | PIN_INPUT)},	/* mmc3_dat4.pr2_mii1_rxd3 */
+	{MMC3_DAT5, (M11 | PIN_INPUT)},	/* mmc3_dat5.pr2_mii1_rxd2 */
+	{MMC3_DAT6, (M11 | PIN_INPUT)},	/* mmc3_dat6.pr2_mii1_rxd1 */
+	{MMC3_DAT7, (M11 | PIN_INPUT)},	/* mmc3_dat7.pr2_mii1_rxd0 */
 	{SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_sclk.gpio7_7 */
 	{SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_d1.gpio7_8 */
 	{SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_d0.gpio7_9 */
-- 
2.7.4

  parent reply	other threads:[~2017-01-30 15:15 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-30 15:15 [U-Boot] [u-boot PATCH v2 0/8] am57xx-idk LCD and am571x-idk 6 port ethernet pinmux Roger Quadros
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 1/8] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro Roger Quadros
2017-01-31  4:08   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 2/8] ti: common: board_detect: commodify ethaddr environment setting code Roger Quadros
2017-01-31  4:08   ` Lokesh Vutla
2017-01-31 21:38   ` Tom Rini
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 3/8] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD Roger Quadros
2017-01-31  4:10   ` Lokesh Vutla
2017-01-30 15:15 ` Roger Quadros [this message]
2017-01-31  4:10   ` [U-Boot] [u-boot PATCH v2 4/8] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 5/8] board: ti: am57xx-idk: Auto detect LCD Panel Roger Quadros
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address Roger Quadros
2017-01-31  4:17   ` Lokesh Vutla
2017-02-01  9:42     ` Roger Quadros
2017-02-01 10:47       ` Lokesh Vutla
2017-02-01 12:01         ` Roger Quadros
2017-02-01 12:14           ` Tom Rini
2017-02-01 13:05             ` Roger Quadros
2017-02-01 13:44               ` Tom Rini
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 7/8] ARM: k2g: setup PRU ethernet MAC addresses Roger Quadros
2017-01-31  4:18   ` Lokesh Vutla
2017-01-30 15:15 ` [U-Boot] [u-boot PATCH v2 8/8] ti: common: board_detect: Rename EEPROM scratch start macro Roger Quadros
2017-01-31 21:38   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485789316-22216-5-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.