All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pradeep Jagadeesh <pradeepkiruvale@gmail.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Greg Kurz <groug@kaod.org>
Cc: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>,
	Alberto Garcia <berto@igalia.com>,
	qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 1/2 v16] fsdev: add IO throttle support to fsdev devices
Date: Fri,  3 Feb 2017 06:57:22 -0500	[thread overview]
Message-ID: <1486123043-26493-2-git-send-email-pradeep.jagadeesh@huawei.com> (raw)
In-Reply-To: <1486123043-26493-1-git-send-email-pradeep.jagadeesh@huawei.com>

This patchset adds the throttle support for the 9p-local driver.
For now this functionality can be enabled only through qemu cli options.
QMP interface and support to other drivers need further extensions.
To make it simple for other 9p drivers, the throttle code has been put in
separate files.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 fsdev/Makefile.objs         |   2 +-
 fsdev/file-op-9p.h          |   3 ++
 fsdev/qemu-fsdev-opts.c     |  77 ++++++++++++++++++++++++++++-
 fsdev/qemu-fsdev-throttle.c | 118 ++++++++++++++++++++++++++++++++++++++++++++
 fsdev/qemu-fsdev-throttle.h |  39 +++++++++++++++
 hw/9pfs/9p-local.c          |   8 +++
 hw/9pfs/9p.c                |   5 ++
 hw/9pfs/cofile.c            |   2 +
 8 files changed, 252 insertions(+), 2 deletions(-)
 create mode 100644 fsdev/qemu-fsdev-throttle.c
 create mode 100644 fsdev/qemu-fsdev-throttle.h

diff --git a/fsdev/Makefile.objs b/fsdev/Makefile.objs
index 1b120a4..659df6e 100644
--- a/fsdev/Makefile.objs
+++ b/fsdev/Makefile.objs
@@ -5,7 +5,7 @@ common-obj-y = qemu-fsdev.o 9p-marshal.o 9p-iov-marshal.o
 else
 common-obj-y = qemu-fsdev-dummy.o
 endif
-common-obj-y += qemu-fsdev-opts.o
+common-obj-y += qemu-fsdev-opts.o qemu-fsdev-throttle.o
 
 # Toplevel always builds this; targets without virtio will put it in
 # common-obj-y
diff --git a/fsdev/file-op-9p.h b/fsdev/file-op-9p.h
index a56dc84..0844a40 100644
--- a/fsdev/file-op-9p.h
+++ b/fsdev/file-op-9p.h
@@ -17,6 +17,7 @@
 #include <dirent.h>
 #include <utime.h>
 #include <sys/vfs.h>
+#include "qemu-fsdev-throttle.h"
 
 #define SM_LOCAL_MODE_BITS    0600
 #define SM_LOCAL_DIR_MODE_BITS    0700
@@ -74,6 +75,7 @@ typedef struct FsDriverEntry {
     char *path;
     int export_flags;
     FileOperations *ops;
+    FsThrottle fst;
 } FsDriverEntry;
 
 typedef struct FsContext
@@ -83,6 +85,7 @@ typedef struct FsContext
     int export_flags;
     struct xattr_operations **xops;
     struct extended_ops exops;
+    FsThrottle *fst;
     /* fs driver specific data */
     void *private;
 } FsContext;
diff --git a/fsdev/qemu-fsdev-opts.c b/fsdev/qemu-fsdev-opts.c
index 1dd8c7a..385423f0 100644
--- a/fsdev/qemu-fsdev-opts.c
+++ b/fsdev/qemu-fsdev-opts.c
@@ -37,8 +37,83 @@ static QemuOptsList qemu_fsdev_opts = {
         }, {
             .name = "sock_fd",
             .type = QEMU_OPT_NUMBER,
+        }, {
+            .name = "throttling.iops-total",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit total I/O operations per second",
+        }, {
+            .name = "throttling.iops-read",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit read operations per second",
+        }, {
+            .name = "throttling.iops-write",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit write operations per second",
+        }, {
+            .name = "throttling.bps-total",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit total bytes per second",
+        }, {
+            .name = "throttling.bps-read",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit read bytes per second",
+        }, {
+            .name = "throttling.bps-write",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit write bytes per second",
+        }, {
+            .name = "throttling.iops-total-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations burst",
+        }, {
+            .name = "throttling.iops-read-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations read burst",
+        }, {
+            .name = "throttling.iops-write-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations write burst",
+        }, {
+            .name = "throttling.bps-total-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes burst",
+        }, {
+            .name = "throttling.bps-read-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes read burst",
+        }, {
+            .name = "throttling.bps-write-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes write burst",
+        }, {
+            .name = "throttling.iops-total-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the iops-total-max burst period, in seconds",
+        }, {
+            .name = "throttling.iops-read-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the iops-read-max burst period, in seconds",
+        }, {
+            .name = "throttling.iops-write-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the iops-write-max burst period, in seconds",
+        }, {
+            .name = "throttling.bps-total-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the bps-total-max burst period, in seconds",
+        }, {
+            .name = "throttling.bps-read-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the bps-read-max burst period, in seconds",
+        }, {
+            .name = "throttling.bps-write-max-length",
+            .type = QEMU_OPT_NUMBER,
+            .help = "length of the bps-write-max burst period, in seconds",
+        }, {
+            .name = "throttling.iops-size",
+            .type = QEMU_OPT_NUMBER,
+            .help = "when limiting by iops max size of an I/O in bytes",
         },
-
         { /*End of list */ }
     },
 };
diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
new file mode 100644
index 0000000..feb9af3
--- /dev/null
+++ b/fsdev/qemu-fsdev-throttle.c
@@ -0,0 +1,118 @@
+/*
+ * Fsdev Throttle
+ *
+ * Copyright (C) 2016 Huawei Technologies Duesseldorf GmbH
+ *
+ * Author: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version.
+ *
+ * See the COPYING file in the top-level directory for details.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "qemu-fsdev-throttle.h"
+#include "qemu/iov.h"
+
+static void fsdev_throttle_read_timer_cb(void *opaque)
+{
+    FsThrottle *fst = opaque;
+    qemu_co_enter_next(&fst->throttled_reqs[false]);
+}
+
+static void fsdev_throttle_write_timer_cb(void *opaque)
+{
+    FsThrottle *fst = opaque;
+    qemu_co_enter_next(&fst->throttled_reqs[true]);
+}
+
+void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
+{
+    throttle_config_init(&fst->cfg);
+    fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
+        qemu_opt_get_number(opts, "throttling.bps-total", 0);
+    fst->cfg.buckets[THROTTLE_BPS_READ].avg  =
+        qemu_opt_get_number(opts, "throttling.bps-read", 0);
+    fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
+        qemu_opt_get_number(opts, "throttling.bps-write", 0);
+    fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
+        qemu_opt_get_number(opts, "throttling.iops-total", 0);
+    fst->cfg.buckets[THROTTLE_OPS_READ].avg =
+        qemu_opt_get_number(opts, "throttling.iops-read", 0);
+    fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
+        qemu_opt_get_number(opts, "throttling.iops-write", 0);
+
+    fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
+        qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
+    fst->cfg.buckets[THROTTLE_BPS_READ].max  =
+        qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
+    fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
+        qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
+    fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
+        qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
+    fst->cfg.buckets[THROTTLE_OPS_READ].max =
+        qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
+    fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
+        qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
+
+    fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
+        qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
+    fst->cfg.buckets[THROTTLE_BPS_READ].burst_length  =
+        qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
+    fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
+        qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
+    fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
+    fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
+    fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
+    fst->cfg.op_size =
+        qemu_opt_get_number(opts, "throttling.iops-size", 0);
+
+    throttle_is_valid(&fst->cfg, errp);
+}
+
+void fsdev_throttle_init(FsThrottle *fst)
+{
+    if (throttle_enabled(&fst->cfg)) {
+        throttle_init(&fst->ts);
+        throttle_timers_init(&fst->tt,
+                             qemu_get_aio_context(),
+                             QEMU_CLOCK_REALTIME,
+                             fsdev_throttle_read_timer_cb,
+                             fsdev_throttle_write_timer_cb,
+                             fst);
+        throttle_config(&fst->ts, &fst->tt, &fst->cfg);
+        qemu_co_queue_init(&fst->throttled_reqs[0]);
+        qemu_co_queue_init(&fst->throttled_reqs[1]);
+    }
+}
+
+void coroutine_fn fsdev_co_throttle_request(FsThrottle *fst, bool is_write,
+                                            struct iovec *iov, int iovcnt)
+{
+    if (throttle_enabled(&fst->cfg)) {
+        if (throttle_schedule_timer(&fst->ts, &fst->tt, is_write) ||
+            !qemu_co_queue_empty(&fst->throttled_reqs[is_write])) {
+            qemu_co_queue_wait(&fst->throttled_reqs[is_write]);
+        }
+
+        throttle_account(&fst->ts, is_write, iov_size(iov, iovcnt));
+
+        if (!qemu_co_queue_empty(&fst->throttled_reqs[is_write]) &&
+            !throttle_schedule_timer(&fst->ts, &fst->tt, is_write)) {
+            qemu_co_queue_next(&fst->throttled_reqs[is_write]);
+        }
+    }
+}
+
+void fsdev_throttle_cleanup(FsThrottle *fst)
+{
+    if (throttle_enabled(&fst->cfg)) {
+        throttle_timers_destroy(&fst->tt);
+    }
+}
diff --git a/fsdev/qemu-fsdev-throttle.h b/fsdev/qemu-fsdev-throttle.h
new file mode 100644
index 0000000..e418643
--- /dev/null
+++ b/fsdev/qemu-fsdev-throttle.h
@@ -0,0 +1,39 @@
+/*
+ * Fsdev Throttle
+ *
+ * Copyright (C) 2016 Huawei Technologies Duesseldorf GmbH
+ *
+ * Author: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version.
+ *
+ * See the COPYING file in the top-level directory for details.
+ *
+ */
+
+#ifndef _FSDEV_THROTTLE_H
+#define _FSDEV_THROTTLE_H
+
+#include "block/aio.h"
+#include "qemu/main-loop.h"
+#include "qemu/coroutine.h"
+#include "qapi/error.h"
+#include "qemu/throttle.h"
+
+typedef struct FsThrottle {
+    ThrottleState ts;
+    ThrottleTimers tt;
+    ThrottleConfig cfg;
+    CoQueue      throttled_reqs[2];
+} FsThrottle;
+
+void fsdev_throttle_parse_opts(QemuOpts *, FsThrottle *, Error **);
+
+void fsdev_throttle_init(FsThrottle *);
+
+void coroutine_fn fsdev_co_throttle_request(FsThrottle *, bool ,
+                                            struct iovec *, int);
+
+void fsdev_throttle_cleanup(FsThrottle *);
+#endif /* _FSDEV_THROTTLE_H */
diff --git a/hw/9pfs/9p-local.c b/hw/9pfs/9p-local.c
index 845675e..828348d 100644
--- a/hw/9pfs/9p-local.c
+++ b/hw/9pfs/9p-local.c
@@ -1209,6 +1209,7 @@ static int local_parse_opts(QemuOpts *opts, struct FsDriverEntry *fse)
 {
     const char *sec_model = qemu_opt_get(opts, "security_model");
     const char *path = qemu_opt_get(opts, "path");
+    Error *err = NULL;
 
     if (!sec_model) {
         error_report("Security model not specified, local fs needs security model");
@@ -1237,6 +1238,13 @@ static int local_parse_opts(QemuOpts *opts, struct FsDriverEntry *fse)
         error_report("fsdev: No path specified");
         return -1;
     }
+
+    fsdev_throttle_parse_opts(opts, &fse->fst, &err);
+    if (err) {
+        error_reportf_err(err, "Throttle configuration is not valid: ");
+        return -1;
+    }
+
     fse->path = g_strdup(path);
 
     return 0;
diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c
index fa58877..22a6a99 100644
--- a/hw/9pfs/9p.c
+++ b/hw/9pfs/9p.c
@@ -3520,6 +3520,10 @@ int v9fs_device_realize_common(V9fsState *s, Error **errp)
         error_setg(errp, "share path %s is not a directory", fse->path);
         goto out;
     }
+
+    s->ctx.fst = &fse->fst;
+    fsdev_throttle_init(s->ctx.fst);
+
     v9fs_path_free(&path);
 
     rc = 0;
@@ -3540,6 +3544,7 @@ void v9fs_device_unrealize_common(V9fsState *s, Error **errp)
     if (s->ops->cleanup) {
         s->ops->cleanup(&s->ctx);
     }
+    fsdev_throttle_cleanup(s->ctx.fst);
     g_free(s->tag);
     g_free(s->ctx.fs_root);
 }
diff --git a/hw/9pfs/cofile.c b/hw/9pfs/cofile.c
index 120e267..88791bc 100644
--- a/hw/9pfs/cofile.c
+++ b/hw/9pfs/cofile.c
@@ -247,6 +247,7 @@ int coroutine_fn v9fs_co_pwritev(V9fsPDU *pdu, V9fsFidState *fidp,
     if (v9fs_request_cancelled(pdu)) {
         return -EINTR;
     }
+    fsdev_co_throttle_request(s->ctx.fst, true, iov, iovcnt);
     v9fs_co_run_in_worker(
         {
             err = s->ops->pwritev(&s->ctx, &fidp->fs, iov, iovcnt, offset);
@@ -266,6 +267,7 @@ int coroutine_fn v9fs_co_preadv(V9fsPDU *pdu, V9fsFidState *fidp,
     if (v9fs_request_cancelled(pdu)) {
         return -EINTR;
     }
+    fsdev_co_throttle_request(s->ctx.fst, false, iov, iovcnt);
     v9fs_co_run_in_worker(
         {
             err = s->ops->preadv(&s->ctx, &fidp->fs, iov, iovcnt, offset);
-- 
1.8.3.1

  reply	other threads:[~2017-02-03 11:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-03 11:57 [Qemu-devel] [PATCH 0/2 v16] fsdev: add IO throttle support to fsdev devices Pradeep Jagadeesh
2017-02-03 11:57 ` Pradeep Jagadeesh [this message]
2017-02-03 12:21   ` [Qemu-devel] [PATCH 1/2 " Alberto Garcia
2017-02-06 19:36   ` Eric Blake
2017-02-06 23:15     ` Greg Kurz
2017-02-07 10:32       ` Greg Kurz
2017-02-07 15:56         ` Eric Blake
2017-02-07 16:29           ` Greg Kurz
2017-02-14 13:21             ` Stefan Hajnoczi
2017-02-22 13:41               ` Greg Kurz
2017-02-22 16:01                 ` Eric Blake
2017-02-22 16:59                   ` Greg Kurz
2017-02-22 17:04                     ` Eric Blake
2017-02-07  6:18     ` Fam Zheng
2017-02-07 10:34     ` Pradeep Jagadeesh
2017-02-03 11:57 ` [Qemu-devel] [PATCH 2/2 v16] throttle: factor out duplicate code Pradeep Jagadeesh
2017-02-03 12:22   ` Alberto Garcia
2017-02-03 12:27     ` Pradeep Jagadeesh
2017-02-03 12:44       ` Alberto Garcia
2017-02-03 12:46         ` Pradeep Jagadeesh
2017-02-03 12:53           ` Alberto Garcia
2017-02-03 12:57             ` Pradeep Jagadeesh
2017-02-06 14:58   ` Greg Kurz
2017-02-06 15:19     ` Pradeep Jagadeesh
2017-02-03 12:02 ` [Qemu-devel] [PATCH 0/2 v16] fsdev: add IO throttle support to fsdev devices no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486123043-26493-2-git-send-email-pradeep.jagadeesh@huawei.com \
    --to=pradeepkiruvale@gmail.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=berto@igalia.com \
    --cc=groug@kaod.org \
    --cc=pradeep.jagadeesh@huawei.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.