All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: mayurkumar.patel@intel.com, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Sinan Kaya <okaya@codeaurora.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rajat Jain <rajatja@google.com>, Yinghai Lu <yinghai@kernel.org>,
	David Daney <david.daney@cavium.com>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Julia Lawall <Julia.Lawall@lip6.fr>,
	linux-kernel@vger.kernel.org
Subject: [PATCH V8 4/5] PCI/ASPM: save power on values during bridge init
Date: Sat,  8 Apr 2017 00:55:50 -0400	[thread overview]
Message-ID: <1491627351-1111-5-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1491627351-1111-1-git-send-email-okaya@codeaurora.org>

Now that we added a hook to be called from device_add, save the
default values from the HW registers early in the boot for further
reuse during hot device add/remove operations.

If the link is down during boot, assume that we want to enable L0s
and L1 following hotplug insertion as well as L1SS if supported.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=194895
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/pci/pcie/aspm.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index e33f84b..c7da087 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -505,8 +505,10 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	 */
 	if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
 		link->aspm_support |= ASPM_STATE_L0S;
-	if (dwreg.enabled & PCIE_LINK_STATE_L0S)
+	if (dwreg.enabled & PCIE_LINK_STATE_L0S) {
 		link->aspm_enabled |= ASPM_STATE_L0S_UP;
+		link->aspm_default |= ASPM_STATE_L0S_UP;
+	}
 	if (upreg.enabled & PCIE_LINK_STATE_L0S)
 		link->aspm_enabled |= ASPM_STATE_L0S_DW;
 	link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
@@ -542,9 +544,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	if (link->aspm_support & ASPM_STATE_L1SS)
 		aspm_calc_l1ss_info(link, &upreg, &dwreg);
 
-	/* Save default state */
-	link->aspm_default = link->aspm_enabled;
-
 	/* Setup initial capable state. Will be updated later */
 	link->aspm_capable = link->aspm_support;
 	/*
@@ -835,11 +834,38 @@ static int pci_aspm_init_downstream(struct pci_dev *pdev)
 static int pci_aspm_init_upstream(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link;
+	struct aspm_register_info upreg;
+	u16 lnk_status;
+	bool ret;
 
 	link = alloc_pcie_link_state(pdev);
 	if (!link)
 		return -ENOMEM;
 
+	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+	if (ret) {
+		pcie_get_aspm_reg(pdev, &upreg);
+		if (upreg.enabled & PCIE_LINK_STATE_L0S)
+			link->aspm_default |= ASPM_STATE_L0S_DW;
+		if (upreg.enabled & PCIE_LINK_STATE_L1)
+			link->aspm_default |= ASPM_STATE_L1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1_PCIPM;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2_PCIPM;
+	} else {
+		if (!pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS))
+			link->aspm_default = ASPM_STATE_L0S | ASPM_STATE_L1;
+		else
+			link->aspm_default = ASPM_STATE_ALL;
+	}
+
 	return 0;
 }
 
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: mayurkumar.patel@intel.com, David Daney <david.daney@cavium.com>,
	linux-arm-msm@vger.kernel.org,
	Shawn Lin <shawn.lin@rock-chips.com>,
	linux-kernel@vger.kernel.org, Sinan Kaya <okaya@codeaurora.org>,
	Julia Lawall <Julia.Lawall@lip6.fr>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rajat Jain <rajatja@google.com>, Yinghai Lu <yinghai@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH V8 4/5] PCI/ASPM: save power on values during bridge init
Date: Sat,  8 Apr 2017 00:55:50 -0400	[thread overview]
Message-ID: <1491627351-1111-5-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1491627351-1111-1-git-send-email-okaya@codeaurora.org>

Now that we added a hook to be called from device_add, save the
default values from the HW registers early in the boot for further
reuse during hot device add/remove operations.

If the link is down during boot, assume that we want to enable L0s
and L1 following hotplug insertion as well as L1SS if supported.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=194895
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/pci/pcie/aspm.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index e33f84b..c7da087 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -505,8 +505,10 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	 */
 	if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
 		link->aspm_support |= ASPM_STATE_L0S;
-	if (dwreg.enabled & PCIE_LINK_STATE_L0S)
+	if (dwreg.enabled & PCIE_LINK_STATE_L0S) {
 		link->aspm_enabled |= ASPM_STATE_L0S_UP;
+		link->aspm_default |= ASPM_STATE_L0S_UP;
+	}
 	if (upreg.enabled & PCIE_LINK_STATE_L0S)
 		link->aspm_enabled |= ASPM_STATE_L0S_DW;
 	link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
@@ -542,9 +544,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	if (link->aspm_support & ASPM_STATE_L1SS)
 		aspm_calc_l1ss_info(link, &upreg, &dwreg);
 
-	/* Save default state */
-	link->aspm_default = link->aspm_enabled;
-
 	/* Setup initial capable state. Will be updated later */
 	link->aspm_capable = link->aspm_support;
 	/*
@@ -835,11 +834,38 @@ static int pci_aspm_init_downstream(struct pci_dev *pdev)
 static int pci_aspm_init_upstream(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link;
+	struct aspm_register_info upreg;
+	u16 lnk_status;
+	bool ret;
 
 	link = alloc_pcie_link_state(pdev);
 	if (!link)
 		return -ENOMEM;
 
+	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+	if (ret) {
+		pcie_get_aspm_reg(pdev, &upreg);
+		if (upreg.enabled & PCIE_LINK_STATE_L0S)
+			link->aspm_default |= ASPM_STATE_L0S_DW;
+		if (upreg.enabled & PCIE_LINK_STATE_L1)
+			link->aspm_default |= ASPM_STATE_L1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1_PCIPM;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2_PCIPM;
+	} else {
+		if (!pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS))
+			link->aspm_default = ASPM_STATE_L0S | ASPM_STATE_L1;
+		else
+			link->aspm_default = ASPM_STATE_ALL;
+	}
+
 	return 0;
 }
 
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V8 4/5] PCI/ASPM: save power on values during bridge init
Date: Sat,  8 Apr 2017 00:55:50 -0400	[thread overview]
Message-ID: <1491627351-1111-5-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1491627351-1111-1-git-send-email-okaya@codeaurora.org>

Now that we added a hook to be called from device_add, save the
default values from the HW registers early in the boot for further
reuse during hot device add/remove operations.

If the link is down during boot, assume that we want to enable L0s
and L1 following hotplug insertion as well as L1SS if supported.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=194895
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/pci/pcie/aspm.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index e33f84b..c7da087 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -505,8 +505,10 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	 */
 	if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
 		link->aspm_support |= ASPM_STATE_L0S;
-	if (dwreg.enabled & PCIE_LINK_STATE_L0S)
+	if (dwreg.enabled & PCIE_LINK_STATE_L0S) {
 		link->aspm_enabled |= ASPM_STATE_L0S_UP;
+		link->aspm_default |= ASPM_STATE_L0S_UP;
+	}
 	if (upreg.enabled & PCIE_LINK_STATE_L0S)
 		link->aspm_enabled |= ASPM_STATE_L0S_DW;
 	link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
@@ -542,9 +544,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	if (link->aspm_support & ASPM_STATE_L1SS)
 		aspm_calc_l1ss_info(link, &upreg, &dwreg);
 
-	/* Save default state */
-	link->aspm_default = link->aspm_enabled;
-
 	/* Setup initial capable state. Will be updated later */
 	link->aspm_capable = link->aspm_support;
 	/*
@@ -835,11 +834,38 @@ static int pci_aspm_init_downstream(struct pci_dev *pdev)
 static int pci_aspm_init_upstream(struct pci_dev *pdev)
 {
 	struct pcie_link_state *link;
+	struct aspm_register_info upreg;
+	u16 lnk_status;
+	bool ret;
 
 	link = alloc_pcie_link_state(pdev);
 	if (!link)
 		return -ENOMEM;
 
+	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+	if (ret) {
+		pcie_get_aspm_reg(pdev, &upreg);
+		if (upreg.enabled & PCIE_LINK_STATE_L0S)
+			link->aspm_default |= ASPM_STATE_L0S_DW;
+		if (upreg.enabled & PCIE_LINK_STATE_L1)
+			link->aspm_default |= ASPM_STATE_L1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+			link->aspm_default |= ASPM_STATE_L1_1_PCIPM;
+		if (upreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+			link->aspm_default |= ASPM_STATE_L1_2_PCIPM;
+	} else {
+		if (!pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS))
+			link->aspm_default = ASPM_STATE_L0S | ASPM_STATE_L1;
+		else
+			link->aspm_default = ASPM_STATE_ALL;
+	}
+
 	return 0;
 }
 
-- 
1.9.1

  parent reply	other threads:[~2017-04-08  4:56 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-08  4:55 [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya
2017-04-08  4:55 ` Sinan Kaya
2017-04-08  4:55 ` Sinan Kaya
2017-04-08  4:55 ` [PATCH V8 1/5] PCI/ASPM: introduce pci_aspm_init() and add to pci_init_capabilities() Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-13 20:51   ` Bjorn Helgaas
2017-04-13 20:51     ` Bjorn Helgaas
2017-04-14 19:10     ` Sinan Kaya
2017-04-14 19:10       ` Sinan Kaya
2017-04-08  4:55 ` [PATCH V8 2/5] PCI/ASPM: split pci_aspm_init() into two Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-12 19:16   ` Rajat Jain
2017-04-12 19:16     ` Rajat Jain
2017-04-13 18:25     ` Bjorn Helgaas
2017-04-13 18:25       ` Bjorn Helgaas
2017-04-13 18:25       ` Bjorn Helgaas
2017-04-14 19:10       ` Sinan Kaya
2017-04-14 19:10         ` Sinan Kaya
2017-04-14 19:10         ` Sinan Kaya
2017-04-08  4:55 ` [PATCH V8 3/5] PCI/ASPM: add init hook to device_add Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-13 20:48   ` Bjorn Helgaas
2017-04-13 20:48     ` Bjorn Helgaas
2017-04-13 20:48     ` Bjorn Helgaas
2017-04-13 21:02     ` Bjorn Helgaas
2017-04-13 21:02       ` Bjorn Helgaas
2017-04-13 21:02       ` Bjorn Helgaas
2017-04-14  1:19       ` Sinan Kaya
2017-04-14  1:19         ` Sinan Kaya
2017-04-14  1:30         ` Bjorn Helgaas
2017-04-14  1:30           ` Bjorn Helgaas
2017-04-08  4:55 ` Sinan Kaya [this message]
2017-04-08  4:55   ` [PATCH V8 4/5] PCI/ASPM: save power on values during bridge init Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-12 19:19   ` Rajat Jain
2017-04-12 19:19     ` Rajat Jain
2017-04-12 19:19     ` Rajat Jain
2017-04-14 19:12     ` Sinan Kaya
2017-04-14 19:12       ` Sinan Kaya
2017-04-14 19:12       ` Sinan Kaya
2017-04-14 21:44       ` Bjorn Helgaas
2017-04-14 21:44         ` Bjorn Helgaas
2017-04-14 21:44         ` Bjorn Helgaas
2017-04-14 22:17         ` Sinan Kaya
2017-04-14 22:17           ` Sinan Kaya
2017-04-17 16:38           ` Bjorn Helgaas
2017-04-17 16:38             ` Bjorn Helgaas
2017-04-17 17:50             ` Sinan Kaya
2017-04-17 17:50               ` Sinan Kaya
2017-04-21  7:46               ` Patel, Mayurkumar
2017-04-21  7:46                 ` Patel, Mayurkumar
2017-04-21  7:46                 ` Patel, Mayurkumar
2017-04-21  7:46                 ` Patel, Mayurkumar
2017-04-21 13:50                 ` Sinan Kaya
2017-04-21 13:50                   ` Sinan Kaya
2017-04-21 14:13                   ` Patel, Mayurkumar
2017-04-21 14:13                     ` Patel, Mayurkumar
2017-04-21 14:13                     ` Patel, Mayurkumar
2017-04-21 14:13                     ` Patel, Mayurkumar
2017-04-25 18:45                 ` Bjorn Helgaas
2017-04-25 18:45                   ` Bjorn Helgaas
2017-05-02 12:02                   ` Patel, Mayurkumar
2017-05-02 12:02                     ` Patel, Mayurkumar
2017-05-02 12:02                     ` Patel, Mayurkumar
2017-05-03 21:10                     ` Bjorn Helgaas
2017-05-03 21:10                       ` Bjorn Helgaas
2017-05-03 21:10                       ` Bjorn Helgaas
2017-05-15  9:10                       ` Patel, Mayurkumar
2017-05-15  9:10                         ` Patel, Mayurkumar
2017-05-15  9:10                         ` Patel, Mayurkumar
2017-05-15  9:10                         ` Patel, Mayurkumar
2017-04-08  4:55 ` [PATCH V8 5/5] PCI/ASPM: move link_state cleanup to bridge remove Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-08  4:55   ` Sinan Kaya
2017-04-10 11:37 ` [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Patel, Mayurkumar
2017-04-10 11:37   ` Patel, Mayurkumar
2017-04-10 11:37   ` Patel, Mayurkumar
2017-04-10 13:07   ` Sinan Kaya
2017-04-10 13:07     ` Sinan Kaya
2017-04-10 13:07     ` Sinan Kaya
2017-04-10 13:11     ` Patel, Mayurkumar
2017-04-10 13:11       ` Patel, Mayurkumar
2017-04-10 13:11       ` Patel, Mayurkumar
2017-04-11 21:19 ` Bjorn Helgaas
2017-04-11 21:19   ` Bjorn Helgaas
2017-04-11 21:19   ` Bjorn Helgaas
2017-04-11 21:27   ` Sinan Kaya
2017-04-11 21:27     ` Sinan Kaya
2017-04-11 22:41     ` Bjorn Helgaas
2017-04-11 22:41       ` Bjorn Helgaas
2017-04-11 22:41       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491627351-1111-5-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=Julia.Lawall@lip6.fr \
    --cc=bhelgaas@google.com \
    --cc=david.daney@cavium.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mayurkumar.patel@intel.com \
    --cc=rajatja@google.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=timur@codeaurora.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.