From: Sinan Kaya <okaya@codeaurora.org>
To: "Patel, Mayurkumar" <mayurkumar.patel@intel.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"timur@codeaurora.org" <timur@codeaurora.org>
Cc: "linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT
Date: Mon, 10 Apr 2017 09:07:16 -0400 [thread overview]
Message-ID: <33d18b40-8449-78a5-7127-9988d846d179@codeaurora.org> (raw)
In-Reply-To: <92EBB4272BF81E4089A7126EC1E7B284667665E7@IRSMSX101.ger.corp.intel.com>
On 4/10/2017 7:37 AM, Patel, Mayurkumar wrote:
>> PCI/ASPM: save power on values during bridge init
>> PCI/ASPM: move link_state cleanup to bridge remove
>>
> Thanks Sinan for new patches. No issues seen so far in my testing for L1 and L1SS both.
> May you please add my tested-by in the patches?
>
> I will keep on testing it and let you know if something goes wrong for any
> corner case.
>
Thanks for testing and providing your tested-by.
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: "Patel, Mayurkumar" <mayurkumar.patel@intel.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"timur@codeaurora.org" <timur@codeaurora.org>
Cc: "linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT
Date: Mon, 10 Apr 2017 09:07:16 -0400 [thread overview]
Message-ID: <33d18b40-8449-78a5-7127-9988d846d179@codeaurora.org> (raw)
In-Reply-To: <92EBB4272BF81E4089A7126EC1E7B284667665E7@IRSMSX101.ger.corp.intel.com>
On 4/10/2017 7:37 AM, Patel, Mayurkumar wrote:
>> PCI/ASPM: save power on values during bridge init
>> PCI/ASPM: move link_state cleanup to bridge remove
>>
> Thanks Sinan for new patches. No issues seen so far in my testing for L1 and L1SS both.
> May you please add my tested-by in the patches?
>
> I will keep on testing it and let you know if something goes wrong for any
> corner case.
>
Thanks for testing and providing your tested-by.
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT
Date: Mon, 10 Apr 2017 09:07:16 -0400 [thread overview]
Message-ID: <33d18b40-8449-78a5-7127-9988d846d179@codeaurora.org> (raw)
In-Reply-To: <92EBB4272BF81E4089A7126EC1E7B284667665E7@IRSMSX101.ger.corp.intel.com>
On 4/10/2017 7:37 AM, Patel, Mayurkumar wrote:
>> PCI/ASPM: save power on values during bridge init
>> PCI/ASPM: move link_state cleanup to bridge remove
>>
> Thanks Sinan for new patches. No issues seen so far in my testing for L1 and L1SS both.
> May you please add my tested-by in the patches?
>
> I will keep on testing it and let you know if something goes wrong for any
> corner case.
>
Thanks for testing and providing your tested-by.
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2017-04-10 13:07 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-08 4:55 [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` [PATCH V8 1/5] PCI/ASPM: introduce pci_aspm_init() and add to pci_init_capabilities() Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-13 20:51 ` Bjorn Helgaas
2017-04-13 20:51 ` Bjorn Helgaas
2017-04-14 19:10 ` Sinan Kaya
2017-04-14 19:10 ` Sinan Kaya
2017-04-08 4:55 ` [PATCH V8 2/5] PCI/ASPM: split pci_aspm_init() into two Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-12 19:16 ` Rajat Jain
2017-04-12 19:16 ` Rajat Jain
2017-04-13 18:25 ` Bjorn Helgaas
2017-04-13 18:25 ` Bjorn Helgaas
2017-04-13 18:25 ` Bjorn Helgaas
2017-04-14 19:10 ` Sinan Kaya
2017-04-14 19:10 ` Sinan Kaya
2017-04-14 19:10 ` Sinan Kaya
2017-04-08 4:55 ` [PATCH V8 3/5] PCI/ASPM: add init hook to device_add Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-13 20:48 ` Bjorn Helgaas
2017-04-13 20:48 ` Bjorn Helgaas
2017-04-13 20:48 ` Bjorn Helgaas
2017-04-13 21:02 ` Bjorn Helgaas
2017-04-13 21:02 ` Bjorn Helgaas
2017-04-13 21:02 ` Bjorn Helgaas
2017-04-14 1:19 ` Sinan Kaya
2017-04-14 1:19 ` Sinan Kaya
2017-04-14 1:30 ` Bjorn Helgaas
2017-04-14 1:30 ` Bjorn Helgaas
2017-04-08 4:55 ` [PATCH V8 4/5] PCI/ASPM: save power on values during bridge init Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-12 19:19 ` Rajat Jain
2017-04-12 19:19 ` Rajat Jain
2017-04-12 19:19 ` Rajat Jain
2017-04-14 19:12 ` Sinan Kaya
2017-04-14 19:12 ` Sinan Kaya
2017-04-14 19:12 ` Sinan Kaya
2017-04-14 21:44 ` Bjorn Helgaas
2017-04-14 21:44 ` Bjorn Helgaas
2017-04-14 21:44 ` Bjorn Helgaas
2017-04-14 22:17 ` Sinan Kaya
2017-04-14 22:17 ` Sinan Kaya
2017-04-17 16:38 ` Bjorn Helgaas
2017-04-17 16:38 ` Bjorn Helgaas
2017-04-17 17:50 ` Sinan Kaya
2017-04-17 17:50 ` Sinan Kaya
2017-04-21 7:46 ` Patel, Mayurkumar
2017-04-21 7:46 ` Patel, Mayurkumar
2017-04-21 7:46 ` Patel, Mayurkumar
2017-04-21 7:46 ` Patel, Mayurkumar
2017-04-21 13:50 ` Sinan Kaya
2017-04-21 13:50 ` Sinan Kaya
2017-04-21 14:13 ` Patel, Mayurkumar
2017-04-21 14:13 ` Patel, Mayurkumar
2017-04-21 14:13 ` Patel, Mayurkumar
2017-04-21 14:13 ` Patel, Mayurkumar
2017-04-25 18:45 ` Bjorn Helgaas
2017-04-25 18:45 ` Bjorn Helgaas
2017-05-02 12:02 ` Patel, Mayurkumar
2017-05-02 12:02 ` Patel, Mayurkumar
2017-05-02 12:02 ` Patel, Mayurkumar
2017-05-03 21:10 ` Bjorn Helgaas
2017-05-03 21:10 ` Bjorn Helgaas
2017-05-03 21:10 ` Bjorn Helgaas
2017-05-15 9:10 ` Patel, Mayurkumar
2017-05-15 9:10 ` Patel, Mayurkumar
2017-05-15 9:10 ` Patel, Mayurkumar
2017-05-15 9:10 ` Patel, Mayurkumar
2017-04-08 4:55 ` [PATCH V8 5/5] PCI/ASPM: move link_state cleanup to bridge remove Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-08 4:55 ` Sinan Kaya
2017-04-10 11:37 ` [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Patel, Mayurkumar
2017-04-10 11:37 ` Patel, Mayurkumar
2017-04-10 11:37 ` Patel, Mayurkumar
2017-04-10 13:07 ` Sinan Kaya [this message]
2017-04-10 13:07 ` Sinan Kaya
2017-04-10 13:07 ` Sinan Kaya
2017-04-10 13:11 ` Patel, Mayurkumar
2017-04-10 13:11 ` Patel, Mayurkumar
2017-04-10 13:11 ` Patel, Mayurkumar
2017-04-11 21:19 ` Bjorn Helgaas
2017-04-11 21:19 ` Bjorn Helgaas
2017-04-11 21:19 ` Bjorn Helgaas
2017-04-11 21:27 ` Sinan Kaya
2017-04-11 21:27 ` Sinan Kaya
2017-04-11 22:41 ` Bjorn Helgaas
2017-04-11 22:41 ` Bjorn Helgaas
2017-04-11 22:41 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=33d18b40-8449-78a5-7127-9988d846d179@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mayurkumar.patel@intel.com \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.