All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anup Patel <anup.patel@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Jon Mason <jonmason@broadcom.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Oza Pawandeep <oza.oza@broadcom.com>,
	Srinath Mannam <srinath.mannam@broadcom.com>,
	Pramod Kumar <pramod.kumar@broadcom.com>,
	Sandeep Tripathy <sandeep.tripathy@broadcom.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH v6 05/11] arm64: dts: Add clock DT nodes for Stingray SOC
Date: Fri,  2 Jun 2017 12:04:29 +0530	[thread overview]
Message-ID: <1496385275-6899-6-git-send-email-anup.patel@broadcom.com> (raw)
In-Reply-To: <1496385275-6899-1-git-send-email-anup.patel@broadcom.com>

From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>

This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.

Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 +++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |   9 ++
 2 files changed, 179 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000..cbc4337
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,170 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		crmu_ref25m: crmu_ref25m {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&osc>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		genpll0: genpll0@0001d104 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll0";
+			reg = <0x0001d104 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll0", "clk_125", "clk_scr",
+					     "clk_250", "clk_pcie_axi",
+					     "clk_paxc_axi_x2",
+					     "clk_paxc_axi";
+		};
+
+		genpll3: genpll3@0001d1e0 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll3";
+			reg = <0x0001d1e0 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll3", "clk_hsls",
+					     "clk_sdio";
+		};
+
+		genpll4: genpll4@0001d214 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll4";
+			reg = <0x0001d214 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll4", "clk_ccn",
+					     "clk_tpiu_pll", "noc_clk",
+					     "pll_chclk_fs4",
+					     "clk_bridge_fscpu";
+		};
+
+		genpll5: genpll5@0001d248 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll5";
+			reg = <0x0001d248 0x32>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll5", "fs4_hf_clk",
+					     "crypto_ae_clk", "raid_ae_clk";
+		};
+
+		lcpll0: lcpll0@0001d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll0";
+			reg = <0x0001d0c4 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "clk_sata_refp",
+					     "clk_sata_refn", "clk_sata_350",
+					     "clk_sata_500";
+		};
+
+		lcpll1: lcpll1@0001d138 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll1";
+			reg = <0x0001d138 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll1", "clk_wanpn",
+					     "clk_usb_ref",
+					     "timesync_evt_clk";
+		};
+
+		hsls_clk: hsls_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 1>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_div2_clk: hsls_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+
+		};
+
+		hsls_div4_clk: hsls_div4_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_clk: hsls_25m_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&crmu_ref25m>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_div2_clk: hsls_25m_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&hsls_25m_clk>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		sdio0_clk: sdio0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		sdio1_clk: sdio1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 61133b7..722e362 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -244,6 +244,15 @@
 		};
 	};
 
+	crmu: crmu {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x66400000 0x100000>;
+
+		#include "stingray-clock.dtsi"
+	};
+
 	hsls {
 		compatible = "simple-bus";
 		#address-cells = <1>;
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: anup.patel@broadcom.com (Anup Patel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 05/11] arm64: dts: Add clock DT nodes for Stingray SOC
Date: Fri,  2 Jun 2017 12:04:29 +0530	[thread overview]
Message-ID: <1496385275-6899-6-git-send-email-anup.patel@broadcom.com> (raw)
In-Reply-To: <1496385275-6899-1-git-send-email-anup.patel@broadcom.com>

From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>

This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.

Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 +++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |   9 ++
 2 files changed, 179 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000..cbc4337
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,170 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		crmu_ref25m: crmu_ref25m {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&osc>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		genpll0: genpll0 at 0001d104 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll0";
+			reg = <0x0001d104 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll0", "clk_125", "clk_scr",
+					     "clk_250", "clk_pcie_axi",
+					     "clk_paxc_axi_x2",
+					     "clk_paxc_axi";
+		};
+
+		genpll3: genpll3 at 0001d1e0 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll3";
+			reg = <0x0001d1e0 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll3", "clk_hsls",
+					     "clk_sdio";
+		};
+
+		genpll4: genpll4 at 0001d214 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll4";
+			reg = <0x0001d214 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll4", "clk_ccn",
+					     "clk_tpiu_pll", "noc_clk",
+					     "pll_chclk_fs4",
+					     "clk_bridge_fscpu";
+		};
+
+		genpll5: genpll5 at 0001d248 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll5";
+			reg = <0x0001d248 0x32>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll5", "fs4_hf_clk",
+					     "crypto_ae_clk", "raid_ae_clk";
+		};
+
+		lcpll0: lcpll0 at 0001d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll0";
+			reg = <0x0001d0c4 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "clk_sata_refp",
+					     "clk_sata_refn", "clk_sata_350",
+					     "clk_sata_500";
+		};
+
+		lcpll1: lcpll1 at 0001d138 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll1";
+			reg = <0x0001d138 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll1", "clk_wanpn",
+					     "clk_usb_ref",
+					     "timesync_evt_clk";
+		};
+
+		hsls_clk: hsls_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 1>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_div2_clk: hsls_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+
+		};
+
+		hsls_div4_clk: hsls_div4_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_clk: hsls_25m_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&crmu_ref25m>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_div2_clk: hsls_25m_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&hsls_25m_clk>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		sdio0_clk: sdio0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		sdio1_clk: sdio1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 61133b7..722e362 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -244,6 +244,15 @@
 		};
 	};
 
+	crmu: crmu {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x66400000 0x100000>;
+
+		#include "stingray-clock.dtsi"
+	};
+
 	hsls {
 		compatible = "simple-bus";
 		#address-cells = <1>;
-- 
2.7.4

  parent reply	other threads:[~2017-06-02  6:36 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-02  6:34 [PATCH v6 00/11] Broadcom Stingray SOC Initial Support Anup Patel
2017-06-02  6:34 ` Anup Patel
2017-06-02  6:34 ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 03/11] clk: bcm: Add clocks " Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02 22:10   ` Stephen Boyd
2017-06-02 22:10     ` Stephen Boyd
2017-06-06  4:21     ` Anup Patel
2017-06-06  4:21       ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` Anup Patel [this message]
2017-06-02  6:34   ` [PATCH v6 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
2017-06-02  6:34 ` [PATCH v6 06/11] arm64: dts: Add NAND " Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 07/11] arm64: dts: Add pinctrl " Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 08/11] arm64: dts: Add GPIO " Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-02  6:34 ` [PATCH v6 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel
2017-06-02  6:34   ` Anup Patel
2017-06-05 16:51 ` [PATCH v6 00/11] Broadcom Stingray SOC Initial Support Florian Fainelli
2017-06-05 16:51   ` Florian Fainelli
2017-06-06  2:08   ` Florian Fainelli
2017-06-06  2:08     ` Florian Fainelli
2017-06-06  3:20     ` Anup Patel
2017-06-06  3:20       ` Anup Patel
2017-06-06 22:30     ` Stephen Boyd
2017-06-06 22:30       ` Stephen Boyd
2017-06-06 22:30       ` Stephen Boyd
2017-06-20  0:28       ` Florian Fainelli
2017-06-20  0:28         ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496385275-6899-6-git-send-email-anup.patel@broadcom.com \
    --to=anup.patel@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jonmason@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=oza.oza@broadcom.com \
    --cc=pramod.kumar@broadcom.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sandeep.tripathy@broadcom.com \
    --cc=sboyd@codeaurora.org \
    --cc=sbranden@broadcom.com \
    --cc=srinath.mannam@broadcom.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.