From: Biju Das <biju.das@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: Simon Horman <horms@verge.net.au>, Wolfram Sang <wsa@the-dreams.de>, Magnus Damm <magnus.damm@gmail.com>, Russell King <linux@armlinux.org.uk>, Chris Paterson <chris.paterson2@renesas.com>, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Biju Das <biju.das@bp.renesas.com> Subject: [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi Date: Tue, 8 Aug 2017 13:46:58 +0100 [thread overview] Message-ID: <1502196418-31341-1-git-send-email-biju.das@bp.renesas.com> (raw) Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72..5c2b140 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -25,6 +25,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; }; cpus { @@ -436,6 +439,58 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg CPG_MOD 926>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: biju.das@bp.renesas.com (Biju Das) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi Date: Tue, 8 Aug 2017 13:46:58 +0100 [thread overview] Message-ID: <1502196418-31341-1-git-send-email-biju.das@bp.renesas.com> (raw) Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72..5c2b140 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -25,6 +25,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; }; cpus { @@ -436,6 +439,58 @@ status = "disabled"; }; + i2c6: i2c at e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg CPG_MOD 926>; + status = "disabled"; + }; + + i2c7: i2c at e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + i2c8: i2c at e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + scifa0: serial at e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; -- 1.9.1
next reply other threads:[~2017-08-08 12:46 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-08-08 12:46 Biju Das [this message] 2017-08-08 12:46 ` [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi Biju Das [not found] ` <1502196418-31341-1-git-send-email-biju.das-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org> 2017-08-09 8:56 ` Simon Horman 2017-08-09 8:56 ` Simon Horman 2017-08-09 8:56 ` Simon Horman 2017-08-09 9:17 ` Sergei Shtylyov 2017-08-09 9:17 ` Sergei Shtylyov [not found] ` <12d923ba-184c-ef59-f27b-41a7592a5f93-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2017-08-09 9:21 ` Biju Das 2017-08-09 9:21 ` Biju Das 2017-08-09 9:21 ` Biju Das 2017-08-10 8:01 ` Simon Horman 2017-08-10 8:01 ` Simon Horman 2017-08-10 8:01 ` Simon Horman [not found] ` <20170810080121.GE16647-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> 2017-08-10 11:24 ` Wolfram Sang 2017-08-10 11:24 ` Wolfram Sang 2017-08-10 11:24 ` Wolfram Sang 2017-08-10 13:49 ` Chris Paterson 2017-08-10 13:49 ` Chris Paterson 2017-08-10 13:49 ` Chris Paterson 2017-08-11 8:48 ` Simon Horman 2017-08-11 8:48 ` Simon Horman 2017-08-14 14:15 ` Geert Uytterhoeven 2017-08-14 14:15 ` Geert Uytterhoeven 2017-08-22 12:20 ` Sergei Shtylyov 2017-08-22 12:20 ` Sergei Shtylyov 2017-08-14 9:53 ` [PATCH v2] ARM: dts: r8a7743: add " Biju Das 2017-08-14 9:53 ` Biju Das 2017-08-14 9:53 ` Biju Das 2017-08-22 9:10 ` Chris Paterson 2017-08-22 9:10 ` Chris Paterson 2017-08-22 9:10 ` Chris Paterson [not found] ` <TY1PR06MB07027D9A55FBFE2D591CEDCFB7840-/PRLmSCtZ14u2TXDOttQZW0DtJ1/0DrXvxpqHgZTriW3zl9H0oFU5g@public.gmane.org> 2017-08-22 12:23 ` Sergei Shtylyov 2017-08-22 12:23 ` Sergei Shtylyov 2017-08-22 12:23 ` Sergei Shtylyov [not found] ` <b7434757-b151-5971-2b5f-525eeaf11467-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2017-08-30 7:32 ` Simon Horman 2017-08-30 7:32 ` Simon Horman 2017-08-30 7:32 ` Simon Horman [not found] ` <20170830073214.GL10398-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> 2017-08-30 7:46 ` Chris Paterson 2017-08-30 7:46 ` Chris Paterson 2017-08-30 7:46 ` Chris Paterson [not found] ` <1502704398-28378-1-git-send-email-biju.das-kTT6dE0pTRh9uiUsa/gSgQ@public.gmane.org> 2017-09-06 13:52 ` [PATCH v3] ARM: dts: r8a7743: Add " Chris Paterson 2017-09-06 13:52 ` Chris Paterson 2017-09-06 13:52 ` Chris Paterson [not found] ` <1504705926-31625-1-git-send-email-chris.paterson2-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> 2017-09-11 7:25 ` Simon Horman 2017-09-11 7:25 ` Simon Horman 2017-09-11 7:25 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1502196418-31341-1-git-send-email-biju.das@bp.renesas.com \ --to=biju.das@bp.renesas.com \ --cc=chris.paterson2@renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=horms@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.