* mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
This serial of patches are adding support of mt2701/mt2712.
there are many changes and HW improvement between mt8173 and
mt2701/mt2712, below is a list of these changes:
1. enlarge CLKDIV bits from 8 to 12
2. remove the PAD_TUNE register and add a new PAD_TUNE0 register
3. add data sync and async fifo feature
4. add busy_check feature
5. add stop_clk fix
6. add enhance_rx support
7. add a seperate CG of source clock
mt2712 supports full of these features, mt2701 supports part of it, and
add a "mediatek,latch-ck" to work-around as it do not support stop-clk
fix.
Note: As Pinctrl/CCF are not ready now, so that current patches do not
include DTS part.
Chaotian Jing (12):
mmc: dt-bindings: update Mediatek MMC bindings
arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
mmc: mediatek: add support of mt2701/mt2712
mmc: mediatek: make hs400_tune_response only for mt8173
mmc: mediatek: add pad_tune0 support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add busy_check support
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add latch-ck support
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: perfer to use rise edge latching for cmd line
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +-
drivers/mmc/host/mtk-sd.c | 298 ++++++++++++++++++++---
3 files changed, 275 insertions(+), 48 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 75+ messages in thread
* mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
This serial of patches are adding support of mt2701/mt2712.
there are many changes and HW improvement between mt8173 and
mt2701/mt2712, below is a list of these changes:
1. enlarge CLKDIV bits from 8 to 12
2. remove the PAD_TUNE register and add a new PAD_TUNE0 register
3. add data sync and async fifo feature
4. add busy_check feature
5. add stop_clk fix
6. add enhance_rx support
7. add a seperate CG of source clock
mt2712 supports full of these features, mt2701 supports part of it, and
add a "mediatek,latch-ck" to work-around as it do not support stop-clk
fix.
Note: As Pinctrl/CCF are not ready now, so that current patches do not
include DTS part.
Chaotian Jing (12):
mmc: dt-bindings: update Mediatek MMC bindings
arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
mmc: mediatek: add support of mt2701/mt2712
mmc: mediatek: make hs400_tune_response only for mt8173
mmc: mediatek: add pad_tune0 support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add busy_check support
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add latch-ck support
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: perfer to use rise edge latching for cmd line
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +-
drivers/mmc/host/mtk-sd.c | 298 ++++++++++++++++++++---
3 files changed, 275 insertions(+), 48 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
Change the comptiable for support of multi-platform
Add description for reg
Add description for source_cg
Add description for mediatek,latch-ck
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 4182ea3..405cd06 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
and the properties used by the msdc driver.
Required properties:
-- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- compatible: value should be either of the following.
+ "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+ "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+ "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+ "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+- reg: physical base address of the controller and length
- interrupts: Should contain MSDC interrupt number
-- clocks: MSDC source clock, HCLK
-- clock-names: "source", "hclk"
+- clocks: MSDC source clock, HCLK, source_cg
+- clock-names: "source", "hclk", "source_cg"
- pinctrl-names: should be "default", "state_uhs"
- pinctrl-0: should contain default/high speed pin ctrl
- pinctrl-1: should contain uhs mode pin ctrl
@@ -30,6 +35,8 @@ Optional properties:
- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
If present,HS400 command responses are sampled on rising edges.
If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
+ error caused by stop clock(fifo full)
Examples:
mmc0: mmc@11230000 {
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
Change the comptiable for support of multi-platform
Add description for reg
Add description for source_cg
Add description for mediatek,latch-ck
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 4182ea3..405cd06 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
and the properties used by the msdc driver.
Required properties:
-- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- compatible: value should be either of the following.
+ "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+ "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+ "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+ "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+- reg: physical base address of the controller and length
- interrupts: Should contain MSDC interrupt number
-- clocks: MSDC source clock, HCLK
-- clock-names: "source", "hclk"
+- clocks: MSDC source clock, HCLK, source_cg
+- clock-names: "source", "hclk", "source_cg"
- pinctrl-names: should be "default", "state_uhs"
- pinctrl-0: should contain default/high speed pin ctrl
- pinctrl-1: should contain uhs mode pin ctrl
@@ -30,6 +35,8 @@ Optional properties:
- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
If present,HS400 command responses are sampled on rising edges.
If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
+ error caused by stop clock(fifo full)
Examples:
mmc0: mmc at 11230000 {
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
Change the comptiable for support of multi-platform
Add description for reg
Add description for source_cg
Add description for mediatek,latch-ck
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 4182ea3..405cd06 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
and the properties used by the msdc driver.
Required properties:
-- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- compatible: value should be either of the following.
+ "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+ "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+ "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+ "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+- reg: physical base address of the controller and length
- interrupts: Should contain MSDC interrupt number
-- clocks: MSDC source clock, HCLK
-- clock-names: "source", "hclk"
+- clocks: MSDC source clock, HCLK, source_cg
+- clock-names: "source", "hclk", "source_cg"
- pinctrl-names: should be "default", "state_uhs"
- pinctrl-0: should contain default/high speed pin ctrl
- pinctrl-1: should contain uhs mode pin ctrl
@@ -30,6 +35,8 @@ Optional properties:
- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
If present,HS400 command responses are sampled on rising edges.
If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
+ error caused by stop clock(fifo full)
Examples:
mmc0: mmc@11230000 {
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-13 14:10 ` Rob Herring
0 siblings, 0 replies; 75+ messages in thread
From: Rob Herring @ 2017-09-13 14:10 UTC (permalink / raw)
To: Chaotian Jing
Cc: Ulf Hansson, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
This is at least the 3rd patch with exactly the same vague subject.
Please make the subject somewhat unique.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..405cd06 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the msdc driver.
>
> Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> +- reg: physical base address of the controller and length
> - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: MSDC source clock, HCLK, source_cg
> +- clock-names: "source", "hclk", "source_cg"
All chips support source_cg? That's not backwards compatible for
existing compatible strings if the driver requires it.
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +35,8 @@ Optional properties:
> - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> If present,HS400 command responses are sampled on rising edges.
> If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
What's a project?
> + error caused by stop clock(fifo full)
>
> Examples:
> mmc0: mmc@11230000 {
> --
> 1.8.1.1.dirty
>
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-13 14:10 ` Rob Herring
0 siblings, 0 replies; 75+ messages in thread
From: Rob Herring @ 2017-09-13 14:10 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
This is at least the 3rd patch with exactly the same vague subject.
Please make the subject somewhat unique.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..405cd06 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the msdc driver.
>
> Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> +- reg: physical base address of the controller and length
> - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: MSDC source clock, HCLK, source_cg
> +- clock-names: "source", "hclk", "source_cg"
All chips support source_cg? That's not backwards compatible for
existing compatible strings if the driver requires it.
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +35,8 @@ Optional properties:
> - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> If present,HS400 command responses are sampled on rising edges.
> If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
What's a project?
> + error caused by stop clock(fifo full)
>
> Examples:
> mmc0: mmc at 11230000 {
> --
> 1.8.1.1.dirty
>
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-13 14:10 ` Rob Herring
0 siblings, 0 replies; 75+ messages in thread
From: Rob Herring @ 2017-09-13 14:10 UTC (permalink / raw)
To: Chaotian Jing
Cc: Ulf Hansson, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w
On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
This is at least the 3rd patch with exactly the same vague subject.
Please make the subject somewhat unique.
>
> Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..405cd06 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the msdc driver.
>
> Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> +- reg: physical base address of the controller and length
> - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: MSDC source clock, HCLK, source_cg
> +- clock-names: "source", "hclk", "source_cg"
All chips support source_cg? That's not backwards compatible for
existing compatible strings if the driver requires it.
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +35,8 @@ Optional properties:
> - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> If present,HS400 command responses are sampled on rising edges.
> If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
What's a project?
> + error caused by stop clock(fifo full)
>
> Examples:
> mmc0: mmc@11230000 {
> --
> 1.8.1.1.dirty
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-13 14:10 ` Rob Herring
(?)
@ 2017-09-14 2:10 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-14 2:10 UTC (permalink / raw)
To: Rob Herring
Cc: Ulf Hansson, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > Change the comptiable for support of multi-platform
> > Add description for reg
> > Add description for source_cg
> > Add description for mediatek,latch-ck
>
> This is at least the 3rd patch with exactly the same vague subject.
> Please make the subject somewhat unique.
>
Thx, will change the subject at next version
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > index 4182ea3..405cd06 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > and the properties used by the msdc driver.
> >
> > Required properties:
> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > +- compatible: value should be either of the following.
> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > +- reg: physical base address of the controller and length
> > - interrupts: Should contain MSDC interrupt number
> > -- clocks: MSDC source clock, HCLK
> > -- clock-names: "source", "hclk"
> > +- clocks: MSDC source clock, HCLK, source_cg
> > +- clock-names: "source", "hclk", "source_cg"
>
> All chips support source_cg? That's not backwards compatible for
> existing compatible strings if the driver requires it.
Not all chips support source_cg, for chips which do not support
source_cg, no need source_cg here, and the driver will parse it
to know if current chip support it.
>
> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
> > @@ -30,6 +35,8 @@ Optional properties:
> > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> > If present,HS400 command responses are sampled on rising edges.
> > If not present,HS400 command responses are sampled on falling edges.
> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>
> What's a project?
eg, MT2701
>
> > + error caused by stop clock(fifo full)
> >
> > Examples:
> > mmc0: mmc@11230000 {
> > --
> > 1.8.1.1.dirty
> >
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-14 2:10 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-14 2:10 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > Change the comptiable for support of multi-platform
> > Add description for reg
> > Add description for source_cg
> > Add description for mediatek,latch-ck
>
> This is at least the 3rd patch with exactly the same vague subject.
> Please make the subject somewhat unique.
>
Thx, will change the subject at next version
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > index 4182ea3..405cd06 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > and the properties used by the msdc driver.
> >
> > Required properties:
> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > +- compatible: value should be either of the following.
> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > +- reg: physical base address of the controller and length
> > - interrupts: Should contain MSDC interrupt number
> > -- clocks: MSDC source clock, HCLK
> > -- clock-names: "source", "hclk"
> > +- clocks: MSDC source clock, HCLK, source_cg
> > +- clock-names: "source", "hclk", "source_cg"
>
> All chips support source_cg? That's not backwards compatible for
> existing compatible strings if the driver requires it.
Not all chips support source_cg, for chips which do not support
source_cg, no need source_cg here, and the driver will parse it
to know if current chip support it.
>
> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
> > @@ -30,6 +35,8 @@ Optional properties:
> > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> > If present,HS400 command responses are sampled on rising edges.
> > If not present,HS400 command responses are sampled on falling edges.
> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>
> What's a project?
eg, MT2701
>
> > + error caused by stop clock(fifo full)
> >
> > Examples:
> > mmc0: mmc at 11230000 {
> > --
> > 1.8.1.1.dirty
> >
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-14 2:10 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-14 2:10 UTC (permalink / raw)
To: Rob Herring
Cc: Ulf Hansson, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > Change the comptiable for support of multi-platform
> > Add description for reg
> > Add description for source_cg
> > Add description for mediatek,latch-ck
>
> This is at least the 3rd patch with exactly the same vague subject.
> Please make the subject somewhat unique.
>
Thx, will change the subject at next version
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > index 4182ea3..405cd06 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > and the properties used by the msdc driver.
> >
> > Required properties:
> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > +- compatible: value should be either of the following.
> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > +- reg: physical base address of the controller and length
> > - interrupts: Should contain MSDC interrupt number
> > -- clocks: MSDC source clock, HCLK
> > -- clock-names: "source", "hclk"
> > +- clocks: MSDC source clock, HCLK, source_cg
> > +- clock-names: "source", "hclk", "source_cg"
>
> All chips support source_cg? That's not backwards compatible for
> existing compatible strings if the driver requires it.
Not all chips support source_cg, for chips which do not support
source_cg, no need source_cg here, and the driver will parse it
to know if current chip support it.
>
> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
> > @@ -30,6 +35,8 @@ Optional properties:
> > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> > If present,HS400 command responses are sampled on rising edges.
> > If not present,HS400 command responses are sampled on falling edges.
> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>
> What's a project?
eg, MT2701
>
> > + error caused by stop clock(fifo full)
> >
> > Examples:
> > mmc0: mmc@11230000 {
> > --
> > 1.8.1.1.dirty
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-14 2:10 ` Chaotian Jing
(?)
@ 2017-09-21 11:38 ` Linus Walleij
-1 siblings, 0 replies; 75+ messages in thread
From: Linus Walleij @ 2017-09-21 11:38 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Ulf Hansson, Mark Rutland, Matthias Brugger,
Catalin Marinas, Will Deacon, yong mao, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, srv_heupstream
On Thu, Sep 14, 2017 at 4:10 AM, Chaotian Jing
<chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>>
>> What's a project?
> eg, MT2701
Replace the word "project" with the word "system" or "SoC" in
your patch.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-21 11:38 ` Linus Walleij
0 siblings, 0 replies; 75+ messages in thread
From: Linus Walleij @ 2017-09-21 11:38 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Sep 14, 2017 at 4:10 AM, Chaotian Jing
<chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>>
>> What's a project?
> eg, MT2701
Replace the word "project" with the word "system" or "SoC" in
your patch.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-21 11:38 ` Linus Walleij
0 siblings, 0 replies; 75+ messages in thread
From: Linus Walleij @ 2017-09-21 11:38 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Ulf Hansson, Mark Rutland, Matthias Brugger,
Catalin Marinas, Will Deacon, yong mao, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, srv_heupstream
On Thu, Sep 14, 2017 at 4:10 AM, Chaotian Jing
<chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>>
>> What's a project?
> eg, MT2701
Replace the word "project" with the word "system" or "SoC" in
your patch.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-14 2:10 ` Chaotian Jing
(?)
@ 2017-09-26 22:33 ` Ulf Hansson
-1 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:33 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > Change the comptiable for support of multi-platform
>> > Add description for reg
>> > Add description for source_cg
>> > Add description for mediatek,latch-ck
>>
>> This is at least the 3rd patch with exactly the same vague subject.
>> Please make the subject somewhat unique.
>>
> Thx, will change the subject at next version
>> >
>> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > ---
>> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > index 4182ea3..405cd06 100644
>> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > and the properties used by the msdc driver.
>> >
>> > Required properties:
>> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > +- compatible: value should be either of the following.
>> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > +- reg: physical base address of the controller and length
>> > - interrupts: Should contain MSDC interrupt number
>> > -- clocks: MSDC source clock, HCLK
>> > -- clock-names: "source", "hclk"
>> > +- clocks: MSDC source clock, HCLK, source_cg
>> > +- clock-names: "source", "hclk", "source_cg"
>>
>> All chips support source_cg? That's not backwards compatible for
>> existing compatible strings if the driver requires it.
> Not all chips support source_cg, for chips which do not support
> source_cg, no need source_cg here, and the driver will parse it
> to know if current chip support it.
In such case you must not add add a required binding for it. I think
that is what Rob is trying to point out for you.
[...]
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-26 22:33 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:33 UTC (permalink / raw)
To: linux-arm-kernel
On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > Change the comptiable for support of multi-platform
>> > Add description for reg
>> > Add description for source_cg
>> > Add description for mediatek,latch-ck
>>
>> This is at least the 3rd patch with exactly the same vague subject.
>> Please make the subject somewhat unique.
>>
> Thx, will change the subject at next version
>> >
>> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > ---
>> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > index 4182ea3..405cd06 100644
>> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > and the properties used by the msdc driver.
>> >
>> > Required properties:
>> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > +- compatible: value should be either of the following.
>> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > +- reg: physical base address of the controller and length
>> > - interrupts: Should contain MSDC interrupt number
>> > -- clocks: MSDC source clock, HCLK
>> > -- clock-names: "source", "hclk"
>> > +- clocks: MSDC source clock, HCLK, source_cg
>> > +- clock-names: "source", "hclk", "source_cg"
>>
>> All chips support source_cg? That's not backwards compatible for
>> existing compatible strings if the driver requires it.
> Not all chips support source_cg, for chips which do not support
> source_cg, no need source_cg here, and the driver will parse it
> to know if current chip support it.
In such case you must not add add a required binding for it. I think
that is what Rob is trying to point out for you.
[...]
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-26 22:33 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:33 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > Change the comptiable for support of multi-platform
>> > Add description for reg
>> > Add description for source_cg
>> > Add description for mediatek,latch-ck
>>
>> This is at least the 3rd patch with exactly the same vague subject.
>> Please make the subject somewhat unique.
>>
> Thx, will change the subject at next version
>> >
>> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > ---
>> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > index 4182ea3..405cd06 100644
>> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > and the properties used by the msdc driver.
>> >
>> > Required properties:
>> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > +- compatible: value should be either of the following.
>> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > +- reg: physical base address of the controller and length
>> > - interrupts: Should contain MSDC interrupt number
>> > -- clocks: MSDC source clock, HCLK
>> > -- clock-names: "source", "hclk"
>> > +- clocks: MSDC source clock, HCLK, source_cg
>> > +- clock-names: "source", "hclk", "source_cg"
>>
>> All chips support source_cg? That's not backwards compatible for
>> existing compatible strings if the driver requires it.
> Not all chips support source_cg, for chips which do not support
> source_cg, no need source_cg here, and the driver will parse it
> to know if current chip support it.
In such case you must not add add a required binding for it. I think
that is what Rob is trying to point out for you.
[...]
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-26 22:33 ` Ulf Hansson
(?)
@ 2017-09-27 1:18 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:18 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > Change the comptiable for support of multi-platform
> >> > Add description for reg
> >> > Add description for source_cg
> >> > Add description for mediatek,latch-ck
> >>
> >> This is at least the 3rd patch with exactly the same vague subject.
> >> Please make the subject somewhat unique.
> >>
> > Thx, will change the subject at next version
> >> >
> >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> >> > ---
> >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > index 4182ea3..405cd06 100644
> >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > and the properties used by the msdc driver.
> >> >
> >> > Required properties:
> >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > +- compatible: value should be either of the following.
> >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > +- reg: physical base address of the controller and length
> >> > - interrupts: Should contain MSDC interrupt number
> >> > -- clocks: MSDC source clock, HCLK
> >> > -- clock-names: "source", "hclk"
> >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > +- clock-names: "source", "hclk", "source_cg"
> >>
> >> All chips support source_cg? That's not backwards compatible for
> >> existing compatible strings if the driver requires it.
> > Not all chips support source_cg, for chips which do not support
> > source_cg, no need source_cg here, and the driver will parse it
> > to know if current chip support it.
>
> In such case you must not add add a required binding for it. I think
> that is what Rob is trying to point out for you.
>
> [...]
>
> Kind regards
> Uffe
The source_cg is required(MUST) at MT2712 and future SoCs, but not
required(do not have it) at previous SoCs, so that put it at required
properties, let the driver to handle it.
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-27 1:18 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:18 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > Change the comptiable for support of multi-platform
> >> > Add description for reg
> >> > Add description for source_cg
> >> > Add description for mediatek,latch-ck
> >>
> >> This is at least the 3rd patch with exactly the same vague subject.
> >> Please make the subject somewhat unique.
> >>
> > Thx, will change the subject at next version
> >> >
> >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> >> > ---
> >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > index 4182ea3..405cd06 100644
> >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > and the properties used by the msdc driver.
> >> >
> >> > Required properties:
> >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > +- compatible: value should be either of the following.
> >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > +- reg: physical base address of the controller and length
> >> > - interrupts: Should contain MSDC interrupt number
> >> > -- clocks: MSDC source clock, HCLK
> >> > -- clock-names: "source", "hclk"
> >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > +- clock-names: "source", "hclk", "source_cg"
> >>
> >> All chips support source_cg? That's not backwards compatible for
> >> existing compatible strings if the driver requires it.
> > Not all chips support source_cg, for chips which do not support
> > source_cg, no need source_cg here, and the driver will parse it
> > to know if current chip support it.
>
> In such case you must not add add a required binding for it. I think
> that is what Rob is trying to point out for you.
>
> [...]
>
> Kind regards
> Uffe
The source_cg is required(MUST) at MT2712 and future SoCs, but not
required(do not have it) at previous SoCs, so that put it at required
properties, let the driver to handle it.
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-27 1:18 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:18 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > Change the comptiable for support of multi-platform
> >> > Add description for reg
> >> > Add description for source_cg
> >> > Add description for mediatek,latch-ck
> >>
> >> This is at least the 3rd patch with exactly the same vague subject.
> >> Please make the subject somewhat unique.
> >>
> > Thx, will change the subject at next version
> >> >
> >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> >> > ---
> >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > index 4182ea3..405cd06 100644
> >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > and the properties used by the msdc driver.
> >> >
> >> > Required properties:
> >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > +- compatible: value should be either of the following.
> >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > +- reg: physical base address of the controller and length
> >> > - interrupts: Should contain MSDC interrupt number
> >> > -- clocks: MSDC source clock, HCLK
> >> > -- clock-names: "source", "hclk"
> >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > +- clock-names: "source", "hclk", "source_cg"
> >>
> >> All chips support source_cg? That's not backwards compatible for
> >> existing compatible strings if the driver requires it.
> > Not all chips support source_cg, for chips which do not support
> > source_cg, no need source_cg here, and the driver will parse it
> > to know if current chip support it.
>
> In such case you must not add add a required binding for it. I think
> that is what Rob is trying to point out for you.
>
> [...]
>
> Kind regards
> Uffe
The source_cg is required(MUST) at MT2712 and future SoCs, but not
required(do not have it) at previous SoCs, so that put it at required
properties, let the driver to handle it.
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-27 1:18 ` Chaotian Jing
(?)
@ 2017-09-29 1:56 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-29 1:56 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > >> > Change the comptiable for support of multi-platform
> > >> > Add description for reg
> > >> > Add description for source_cg
> > >> > Add description for mediatek,latch-ck
> > >>
> > >> This is at least the 3rd patch with exactly the same vague subject.
> > >> Please make the subject somewhat unique.
> > >>
> > > Thx, will change the subject at next version
> > >> >
> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > >> > ---
> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > >> >
> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > index 4182ea3..405cd06 100644
> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > >> > and the properties used by the msdc driver.
> > >> >
> > >> > Required properties:
> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > >> > +- compatible: value should be either of the following.
> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > >> > +- reg: physical base address of the controller and length
> > >> > - interrupts: Should contain MSDC interrupt number
> > >> > -- clocks: MSDC source clock, HCLK
> > >> > -- clock-names: "source", "hclk"
> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > >> > +- clock-names: "source", "hclk", "source_cg"
> > >>
> > >> All chips support source_cg? That's not backwards compatible for
> > >> existing compatible strings if the driver requires it.
> > > Not all chips support source_cg, for chips which do not support
> > > source_cg, no need source_cg here, and the driver will parse it
> > > to know if current chip support it.
> >
> > In such case you must not add add a required binding for it. I think
> > that is what Rob is trying to point out for you.
> >
> > [...]
> >
> > Kind regards
> > Uffe
> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> required(do not have it) at previous SoCs, so that put it at required
> properties, let the driver to handle it.
Any other comments about it ? still must not add a required binding for
it ? if add a optional binding for it, how to add it ? as cannot
duplicate "clocks" & "clock-names" in one node.
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-29 1:56 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-29 1:56 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > >> > Change the comptiable for support of multi-platform
> > >> > Add description for reg
> > >> > Add description for source_cg
> > >> > Add description for mediatek,latch-ck
> > >>
> > >> This is at least the 3rd patch with exactly the same vague subject.
> > >> Please make the subject somewhat unique.
> > >>
> > > Thx, will change the subject at next version
> > >> >
> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > >> > ---
> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > >> >
> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > index 4182ea3..405cd06 100644
> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > >> > and the properties used by the msdc driver.
> > >> >
> > >> > Required properties:
> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > >> > +- compatible: value should be either of the following.
> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > >> > +- reg: physical base address of the controller and length
> > >> > - interrupts: Should contain MSDC interrupt number
> > >> > -- clocks: MSDC source clock, HCLK
> > >> > -- clock-names: "source", "hclk"
> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > >> > +- clock-names: "source", "hclk", "source_cg"
> > >>
> > >> All chips support source_cg? That's not backwards compatible for
> > >> existing compatible strings if the driver requires it.
> > > Not all chips support source_cg, for chips which do not support
> > > source_cg, no need source_cg here, and the driver will parse it
> > > to know if current chip support it.
> >
> > In such case you must not add add a required binding for it. I think
> > that is what Rob is trying to point out for you.
> >
> > [...]
> >
> > Kind regards
> > Uffe
> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> required(do not have it) at previous SoCs, so that put it at required
> properties, let the driver to handle it.
Any other comments about it ? still must not add a required binding for
it ? if add a optional binding for it, how to add it ? as cannot
duplicate "clocks" & "clock-names" in one node.
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-09-29 1:56 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-29 1:56 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, srv_heupstream
On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > >> > Change the comptiable for support of multi-platform
> > >> > Add description for reg
> > >> > Add description for source_cg
> > >> > Add description for mediatek,latch-ck
> > >>
> > >> This is at least the 3rd patch with exactly the same vague subject.
> > >> Please make the subject somewhat unique.
> > >>
> > > Thx, will change the subject at next version
> > >> >
> > >> > Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > >> > ---
> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > >> >
> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > index 4182ea3..405cd06 100644
> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > >> > and the properties used by the msdc driver.
> > >> >
> > >> > Required properties:
> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > >> > +- compatible: value should be either of the following.
> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > >> > +- reg: physical base address of the controller and length
> > >> > - interrupts: Should contain MSDC interrupt number
> > >> > -- clocks: MSDC source clock, HCLK
> > >> > -- clock-names: "source", "hclk"
> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > >> > +- clock-names: "source", "hclk", "source_cg"
> > >>
> > >> All chips support source_cg? That's not backwards compatible for
> > >> existing compatible strings if the driver requires it.
> > > Not all chips support source_cg, for chips which do not support
> > > source_cg, no need source_cg here, and the driver will parse it
> > > to know if current chip support it.
> >
> > In such case you must not add add a required binding for it. I think
> > that is what Rob is trying to point out for you.
> >
> > [...]
> >
> > Kind regards
> > Uffe
> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> required(do not have it) at previous SoCs, so that put it at required
> properties, let the driver to handle it.
Any other comments about it ? still must not add a required binding for
it ? if add a optional binding for it, how to add it ? as cannot
duplicate "clocks" & "clock-names" in one node.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-29 1:56 ` Chaotian Jing
(?)
@ 2017-10-02 6:53 ` Ulf Hansson
-1 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-10-02 6:53 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
[...]
>> > >> > Required properties:
>> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > >> > +- compatible: value should be either of the following.
>> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > >> > +- reg: physical base address of the controller and length
>> > >> > - interrupts: Should contain MSDC interrupt number
>> > >> > -- clocks: MSDC source clock, HCLK
>> > >> > -- clock-names: "source", "hclk"
>> > >> > +- clocks: MSDC source clock, HCLK, source_cg
>> > >> > +- clock-names: "source", "hclk", "source_cg"
>> > >>
>> > >> All chips support source_cg? That's not backwards compatible for
>> > >> existing compatible strings if the driver requires it.
>> > > Not all chips support source_cg, for chips which do not support
>> > > source_cg, no need source_cg here, and the driver will parse it
>> > > to know if current chip support it.
>> >
>> > In such case you must not add add a required binding for it. I think
>> > that is what Rob is trying to point out for you.
>> >
>> > [...]
>> >
>> > Kind regards
>> > Uffe
>> The source_cg is required(MUST) at MT2712 and future SoCs, but not
>> required(do not have it) at previous SoCs, so that put it at required
>> properties, let the driver to handle it.
Then you must explain that in the binding...
On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
>> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
>> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
>> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > >> > Change the comptiable for support of multi-platform
>> > >> > Add description for reg
>> > >> > Add description for source_cg
>> > >> > Add description for mediatek,latch-ck
>> > >>
>> > >> This is at least the 3rd patch with exactly the same vague subject.
>> > >> Please make the subject somewhat unique.
>> > >>
>> > > Thx, will change the subject at next version
>> > >> >
>> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > >> > ---
>> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> > >> >
>> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > index 4182ea3..405cd06 100644
>> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > >> > and the properties used by the msdc driver.
>> > >> >
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
>
>
I suggest you keep the description of the new clock name part of the
"Required properties:" header. However, after each clock name,
explicit state when the clock is required/optional. Something along
the lines as sdhci-msm does it.
Documentation/devicetree/bindings/mmc/sdhci-msm.txt
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-02 6:53 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-10-02 6:53 UTC (permalink / raw)
To: linux-arm-kernel
[...]
>> > >> > Required properties:
>> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > >> > +- compatible: value should be either of the following.
>> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > >> > +- reg: physical base address of the controller and length
>> > >> > - interrupts: Should contain MSDC interrupt number
>> > >> > -- clocks: MSDC source clock, HCLK
>> > >> > -- clock-names: "source", "hclk"
>> > >> > +- clocks: MSDC source clock, HCLK, source_cg
>> > >> > +- clock-names: "source", "hclk", "source_cg"
>> > >>
>> > >> All chips support source_cg? That's not backwards compatible for
>> > >> existing compatible strings if the driver requires it.
>> > > Not all chips support source_cg, for chips which do not support
>> > > source_cg, no need source_cg here, and the driver will parse it
>> > > to know if current chip support it.
>> >
>> > In such case you must not add add a required binding for it. I think
>> > that is what Rob is trying to point out for you.
>> >
>> > [...]
>> >
>> > Kind regards
>> > Uffe
>> The source_cg is required(MUST) at MT2712 and future SoCs, but not
>> required(do not have it) at previous SoCs, so that put it at required
>> properties, let the driver to handle it.
Then you must explain that in the binding...
On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
>> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
>> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
>> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > >> > Change the comptiable for support of multi-platform
>> > >> > Add description for reg
>> > >> > Add description for source_cg
>> > >> > Add description for mediatek,latch-ck
>> > >>
>> > >> This is at least the 3rd patch with exactly the same vague subject.
>> > >> Please make the subject somewhat unique.
>> > >>
>> > > Thx, will change the subject at next version
>> > >> >
>> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > >> > ---
>> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> > >> >
>> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > index 4182ea3..405cd06 100644
>> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > >> > and the properties used by the msdc driver.
>> > >> >
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
>
>
I suggest you keep the description of the new clock name part of the
"Required properties:" header. However, after each clock name,
explicit state when the clock is required/optional. Something along
the lines as sdhci-msm does it.
Documentation/devicetree/bindings/mmc/sdhci-msm.txt
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-02 6:53 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-10-02 6:53 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
[...]
>> > >> > Required properties:
>> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
>> > >> > +- compatible: value should be either of the following.
>> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
>> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>> > >> > +- reg: physical base address of the controller and length
>> > >> > - interrupts: Should contain MSDC interrupt number
>> > >> > -- clocks: MSDC source clock, HCLK
>> > >> > -- clock-names: "source", "hclk"
>> > >> > +- clocks: MSDC source clock, HCLK, source_cg
>> > >> > +- clock-names: "source", "hclk", "source_cg"
>> > >>
>> > >> All chips support source_cg? That's not backwards compatible for
>> > >> existing compatible strings if the driver requires it.
>> > > Not all chips support source_cg, for chips which do not support
>> > > source_cg, no need source_cg here, and the driver will parse it
>> > > to know if current chip support it.
>> >
>> > In such case you must not add add a required binding for it. I think
>> > that is what Rob is trying to point out for you.
>> >
>> > [...]
>> >
>> > Kind regards
>> > Uffe
>> The source_cg is required(MUST) at MT2712 and future SoCs, but not
>> required(do not have it) at previous SoCs, so that put it at required
>> properties, let the driver to handle it.
Then you must explain that in the binding...
On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
>> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
>> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
>> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
>> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
>> > >> > Change the comptiable for support of multi-platform
>> > >> > Add description for reg
>> > >> > Add description for source_cg
>> > >> > Add description for mediatek,latch-ck
>> > >>
>> > >> This is at least the 3rd patch with exactly the same vague subject.
>> > >> Please make the subject somewhat unique.
>> > >>
>> > > Thx, will change the subject at next version
>> > >> >
>> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>> > >> > ---
>> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
>> > >> >
>> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > index 4182ea3..405cd06 100644
>> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
>> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>> > >> > and the properties used by the msdc driver.
>> > >> >
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
>
>
I suggest you keep the description of the new clock name part of the
"Required properties:" header. However, after each clock name,
explicit state when the clock is required/optional. Something along
the lines as sdhci-msm does it.
Documentation/devicetree/bindings/mmc/sdhci-msm.txt
Kind regards
Uffe
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-09 2:16 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-10-09 2:16 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Mon, 2017-10-02 at 08:53 +0200, Ulf Hansson wrote:
> [...]
>
> >> > >> > Required properties:
> >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > >> > +- compatible: value should be either of the following.
> >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > >> > +- reg: physical base address of the controller and length
> >> > >> > - interrupts: Should contain MSDC interrupt number
> >> > >> > -- clocks: MSDC source clock, HCLK
> >> > >> > -- clock-names: "source", "hclk"
> >> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > >> > +- clock-names: "source", "hclk", "source_cg"
> >> > >>
> >> > >> All chips support source_cg? That's not backwards compatible for
> >> > >> existing compatible strings if the driver requires it.
> >> > > Not all chips support source_cg, for chips which do not support
> >> > > source_cg, no need source_cg here, and the driver will parse it
> >> > > to know if current chip support it.
> >> >
> >> > In such case you must not add add a required binding for it. I think
> >> > that is what Rob is trying to point out for you.
> >> >
> >> > [...]
> >> >
> >> > Kind regards
> >> > Uffe
> >> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> >> required(do not have it) at previous SoCs, so that put it at required
> >> properties, let the driver to handle it.
>
> Then you must explain that in the binding...
>
> On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > >> > Change the comptiable for support of multi-platform
> >> > >> > Add description for reg
> >> > >> > Add description for source_cg
> >> > >> > Add description for mediatek,latch-ck
> >> > >>
> >> > >> This is at least the 3rd patch with exactly the same vague subject.
> >> > >> Please make the subject somewhat unique.
> >> > >>
> >> > > Thx, will change the subject at next version
> >> > >> >
> >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> >> > >> > ---
> >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> > >> >
> >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > index 4182ea3..405cd06 100644
> >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > >> > and the properties used by the msdc driver.
> >> > >> >
> >
> > Any other comments about it ? still must not add a required binding for
> > it ? if add a optional binding for it, how to add it ? as cannot
> > duplicate "clocks" & "clock-names" in one node.
> >
> >
>
> I suggest you keep the description of the new clock name part of the
> "Required properties:" header. However, after each clock name,
> explicit state when the clock is required/optional. Something along
> the lines as sdhci-msm does it.
> Documentation/devicetree/bindings/mmc/sdhci-msm.txt
>
> Kind regards
> Uffe
Thx, I will send a new series of patch v2 to review.
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-09 2:16 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-10-09 2:16 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2017-10-02 at 08:53 +0200, Ulf Hansson wrote:
> [...]
>
> >> > >> > Required properties:
> >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > >> > +- compatible: value should be either of the following.
> >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > >> > +- reg: physical base address of the controller and length
> >> > >> > - interrupts: Should contain MSDC interrupt number
> >> > >> > -- clocks: MSDC source clock, HCLK
> >> > >> > -- clock-names: "source", "hclk"
> >> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > >> > +- clock-names: "source", "hclk", "source_cg"
> >> > >>
> >> > >> All chips support source_cg? That's not backwards compatible for
> >> > >> existing compatible strings if the driver requires it.
> >> > > Not all chips support source_cg, for chips which do not support
> >> > > source_cg, no need source_cg here, and the driver will parse it
> >> > > to know if current chip support it.
> >> >
> >> > In such case you must not add add a required binding for it. I think
> >> > that is what Rob is trying to point out for you.
> >> >
> >> > [...]
> >> >
> >> > Kind regards
> >> > Uffe
> >> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> >> required(do not have it) at previous SoCs, so that put it at required
> >> properties, let the driver to handle it.
>
> Then you must explain that in the binding...
>
> On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > >> > Change the comptiable for support of multi-platform
> >> > >> > Add description for reg
> >> > >> > Add description for source_cg
> >> > >> > Add description for mediatek,latch-ck
> >> > >>
> >> > >> This is at least the 3rd patch with exactly the same vague subject.
> >> > >> Please make the subject somewhat unique.
> >> > >>
> >> > > Thx, will change the subject at next version
> >> > >> >
> >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> >> > >> > ---
> >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> > >> >
> >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > index 4182ea3..405cd06 100644
> >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > >> > and the properties used by the msdc driver.
> >> > >> >
> >
> > Any other comments about it ? still must not add a required binding for
> > it ? if add a optional binding for it, how to add it ? as cannot
> > duplicate "clocks" & "clock-names" in one node.
> >
> >
>
> I suggest you keep the description of the new clock name part of the
> "Required properties:" header. However, after each clock name,
> explicit state when the clock is required/optional. Something along
> the lines as sdhci-msm does it.
> Documentation/devicetree/bindings/mmc/sdhci-msm.txt
>
> Kind regards
> Uffe
Thx, I will send a new series of patch v2 to review.
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-09 2:16 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-10-09 2:16 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, srv_heupstream
On Mon, 2017-10-02 at 08:53 +0200, Ulf Hansson wrote:
> [...]
>
> >> > >> > Required properties:
> >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> >> > >> > +- compatible: value should be either of the following.
> >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> >> > >> > +- reg: physical base address of the controller and length
> >> > >> > - interrupts: Should contain MSDC interrupt number
> >> > >> > -- clocks: MSDC source clock, HCLK
> >> > >> > -- clock-names: "source", "hclk"
> >> > >> > +- clocks: MSDC source clock, HCLK, source_cg
> >> > >> > +- clock-names: "source", "hclk", "source_cg"
> >> > >>
> >> > >> All chips support source_cg? That's not backwards compatible for
> >> > >> existing compatible strings if the driver requires it.
> >> > > Not all chips support source_cg, for chips which do not support
> >> > > source_cg, no need source_cg here, and the driver will parse it
> >> > > to know if current chip support it.
> >> >
> >> > In such case you must not add add a required binding for it. I think
> >> > that is what Rob is trying to point out for you.
> >> >
> >> > [...]
> >> >
> >> > Kind regards
> >> > Uffe
> >> The source_cg is required(MUST) at MT2712 and future SoCs, but not
> >> required(do not have it) at previous SoCs, so that put it at required
> >> properties, let the driver to handle it.
>
> Then you must explain that in the binding...
>
> On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> >> > >> > Change the comptiable for support of multi-platform
> >> > >> > Add description for reg
> >> > >> > Add description for source_cg
> >> > >> > Add description for mediatek,latch-ck
> >> > >>
> >> > >> This is at least the 3rd patch with exactly the same vague subject.
> >> > >> Please make the subject somewhat unique.
> >> > >>
> >> > > Thx, will change the subject at next version
> >> > >> >
> >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> >> > >> > ---
> >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >> > >> >
> >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > index 4182ea3..405cd06 100644
> >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> >> > >> > and the properties used by the msdc driver.
> >> > >> >
> >
> > Any other comments about it ? still must not add a required binding for
> > it ? if add a optional binding for it, how to add it ? as cannot
> > duplicate "clocks" & "clock-names" in one node.
> >
> >
>
> I suggest you keep the description of the new clock name part of the
> "Required properties:" header. However, after each clock name,
> explicit state when the clock is required/optional. Something along
> the lines as sdhci-msm does it.
> Documentation/devicetree/bindings/mmc/sdhci-msm.txt
>
> Kind regards
> Uffe
Thx, I will send a new series of patch v2 to review.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 75+ messages in thread
* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
2017-09-29 1:56 ` Chaotian Jing
(?)
@ 2017-10-02 10:49 ` Yingjoe Chen
-1 siblings, 0 replies; 75+ messages in thread
From: Yingjoe Chen @ 2017-10-02 10:49 UTC (permalink / raw)
To: Chaotian Jing
Cc: Ulf Hansson, Mark Rutland, Rob Herring, srv_heupstream,
devicetree, Catalin Marinas, Linus Walleij, Will Deacon,
linux-kernel, yong mao, Phong LE, Javier Martinez Canillas,
linux-mediatek, Matthias Brugger, linux-mmc, linux-arm-kernel,
Heiner Kallweit
On Fri, 2017-09-29 at 09:56 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > > >> > Change the comptiable for support of multi-platform
> > > >> > Add description for reg
> > > >> > Add description for source_cg
> > > >> > Add description for mediatek,latch-ck
> > > >>
> > > >> This is at least the 3rd patch with exactly the same vague subject.
> > > >> Please make the subject somewhat unique.
> > > >>
> > > > Thx, will change the subject at next version
> > > >> >
> > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > > >> > ---
> > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > > >> >
> > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > index 4182ea3..405cd06 100644
> > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > > >> > and the properties used by the msdc driver.
> > > >> >
> > > >> > Required properties:
> > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > > >> > +- compatible: value should be either of the following.
> > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > > >> > +- reg: physical base address of the controller and length
> > > >> > - interrupts: Should contain MSDC interrupt number
> > > >> > -- clocks: MSDC source clock, HCLK
> > > >> > -- clock-names: "source", "hclk"
> > > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > > >> > +- clock-names: "source", "hclk", "source_cg"
> > > >>
> > > >> All chips support source_cg? That's not backwards compatible for
> > > >> existing compatible strings if the driver requires it.
> > > > Not all chips support source_cg, for chips which do not support
> > > > source_cg, no need source_cg here, and the driver will parse it
> > > > to know if current chip support it.
> > >
> > > In such case you must not add add a required binding for it. I think
> > > that is what Rob is trying to point out for you.
> > >
> > > [...]
> > >
> > > Kind regards
> > > Uffe
> > The source_cg is required(MUST) at MT2712 and future SoCs, but not
> > required(do not have it) at previous SoCs, so that put it at required
> > properties, let the driver to handle it.
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
Chaotian,
You can follow examples of scpsys [1]:
- clock, clock-names: clocks according to the common clock binding.
These are clocks which hardware needs to be
enabled before enabling certain power domains.
Required clocks for MT2701: "mm", "mfg", "ethif"
Required clocks for MT6797: "mm", "mfg", "vdec"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt?h=v4.13.4
Joe.C
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-02 10:49 ` Yingjoe Chen
0 siblings, 0 replies; 75+ messages in thread
From: Yingjoe Chen @ 2017-10-02 10:49 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 2017-09-29 at 09:56 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > > >> > Change the comptiable for support of multi-platform
> > > >> > Add description for reg
> > > >> > Add description for source_cg
> > > >> > Add description for mediatek,latch-ck
> > > >>
> > > >> This is at least the 3rd patch with exactly the same vague subject.
> > > >> Please make the subject somewhat unique.
> > > >>
> > > > Thx, will change the subject at next version
> > > >> >
> > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > > >> > ---
> > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > > >> >
> > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > index 4182ea3..405cd06 100644
> > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > > >> > and the properties used by the msdc driver.
> > > >> >
> > > >> > Required properties:
> > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > > >> > +- compatible: value should be either of the following.
> > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > > >> > +- reg: physical base address of the controller and length
> > > >> > - interrupts: Should contain MSDC interrupt number
> > > >> > -- clocks: MSDC source clock, HCLK
> > > >> > -- clock-names: "source", "hclk"
> > > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > > >> > +- clock-names: "source", "hclk", "source_cg"
> > > >>
> > > >> All chips support source_cg? That's not backwards compatible for
> > > >> existing compatible strings if the driver requires it.
> > > > Not all chips support source_cg, for chips which do not support
> > > > source_cg, no need source_cg here, and the driver will parse it
> > > > to know if current chip support it.
> > >
> > > In such case you must not add add a required binding for it. I think
> > > that is what Rob is trying to point out for you.
> > >
> > > [...]
> > >
> > > Kind regards
> > > Uffe
> > The source_cg is required(MUST) at MT2712 and future SoCs, but not
> > required(do not have it) at previous SoCs, so that put it at required
> > properties, let the driver to handle it.
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
Chaotian,
You can follow examples of scpsys [1]:
- clock, clock-names: clocks according to the common clock binding.
These are clocks which hardware needs to be
enabled before enabling certain power domains.
Required clocks for MT2701: "mm", "mfg", "ethif"
Required clocks for MT6797: "mm", "mfg", "vdec"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt?h=v4.13.4
Joe.C
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
@ 2017-10-02 10:49 ` Yingjoe Chen
0 siblings, 0 replies; 75+ messages in thread
From: Yingjoe Chen @ 2017-10-02 10:49 UTC (permalink / raw)
To: Chaotian Jing
Cc: Ulf Hansson, Mark Rutland, Rob Herring, srv_heupstream,
devicetree, Catalin Marinas, Linus Walleij, Will Deacon,
linux-kernel, yong mao, Phong LE, Javier Martinez Canillas,
linux-mediatek, Matthias Brugger, linux-mmc, linux-arm-kernel,
Heiner Kallweit
On Fri, 2017-09-29 at 09:56 +0800, Chaotian Jing wrote:
> On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote:
> > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote:
> > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > > >> > Change the comptiable for support of multi-platform
> > > >> > Add description for reg
> > > >> > Add description for source_cg
> > > >> > Add description for mediatek,latch-ck
> > > >>
> > > >> This is at least the 3rd patch with exactly the same vague subject.
> > > >> Please make the subject somewhat unique.
> > > >>
> > > > Thx, will change the subject at next version
> > > >> >
> > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > > >> > ---
> > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > > >> > 1 file changed, 10 insertions(+), 3 deletions(-)
> > > >> >
> > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > index 4182ea3..405cd06 100644
> > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > > >> > and the properties used by the msdc driver.
> > > >> >
> > > >> > Required properties:
> > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > > >> > +- compatible: value should be either of the following.
> > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > > >> > +- reg: physical base address of the controller and length
> > > >> > - interrupts: Should contain MSDC interrupt number
> > > >> > -- clocks: MSDC source clock, HCLK
> > > >> > -- clock-names: "source", "hclk"
> > > >> > +- clocks: MSDC source clock, HCLK, source_cg
> > > >> > +- clock-names: "source", "hclk", "source_cg"
> > > >>
> > > >> All chips support source_cg? That's not backwards compatible for
> > > >> existing compatible strings if the driver requires it.
> > > > Not all chips support source_cg, for chips which do not support
> > > > source_cg, no need source_cg here, and the driver will parse it
> > > > to know if current chip support it.
> > >
> > > In such case you must not add add a required binding for it. I think
> > > that is what Rob is trying to point out for you.
> > >
> > > [...]
> > >
> > > Kind regards
> > > Uffe
> > The source_cg is required(MUST) at MT2712 and future SoCs, but not
> > required(do not have it) at previous SoCs, so that put it at required
> > properties, let the driver to handle it.
>
> Any other comments about it ? still must not add a required binding for
> it ? if add a optional binding for it, how to add it ? as cannot
> duplicate "clocks" & "clock-names" in one node.
Chaotian,
You can follow examples of scpsys [1]:
- clock, clock-names: clocks according to the common clock binding.
These are clocks which hardware needs to be
enabled before enabling certain power domains.
Required clocks for MT2701: "mm", "mfg", "ethif"
Required clocks for MT6797: "mm", "mfg", "vdec"
Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt?h=v4.13.4
Joe.C
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
devicetree bindings has been updated to support multi-platforms,
so that each platform has its owns compatible name.
And, this compatible name may used in driver to distinguish with
other platform.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b99a273..26396ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -682,8 +682,7 @@
};
mmc0: mmc@11230000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11230000 0 0x1000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -693,8 +692,7 @@
};
mmc1: mmc@11240000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11240000 0 0x1000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -704,8 +702,7 @@
};
mmc2: mmc@11250000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11250000 0 0x1000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_2>,
@@ -715,8 +712,7 @@
};
mmc3: mmc@11260000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11260000 0 0x1000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_3>,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 02/12] arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
devicetree bindings has been updated to support multi-platforms,
so that each platform has its owns compatible name.
And, this compatible name may used in driver to distinguish with
other platform.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b99a273..26396ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -682,8 +682,7 @@
};
mmc0: mmc at 11230000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11230000 0 0x1000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -693,8 +692,7 @@
};
mmc1: mmc at 11240000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11240000 0 0x1000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -704,8 +702,7 @@
};
mmc2: mmc at 11250000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11250000 0 0x1000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_2>,
@@ -715,8 +712,7 @@
};
mmc3: mmc at 11260000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11260000 0 0x1000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_3>,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 02/12] arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Catalin Marinas,
Linus Walleij, Will Deacon, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
yong mao, Phong LE, Javier Martinez Canillas, Rob Herring,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Matthias Brugger, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
Chaotian Jing, Heiner Kallweit
devicetree bindings has been updated to support multi-platforms,
so that each platform has its owns compatible name.
And, this compatible name may used in driver to distinguish with
other platform.
Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b99a273..26396ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -682,8 +682,7 @@
};
mmc0: mmc@11230000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11230000 0 0x1000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -693,8 +692,7 @@
};
mmc1: mmc@11240000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11240000 0 0x1000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -704,8 +702,7 @@
};
mmc2: mmc@11250000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11250000 0 0x1000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_2>,
@@ -715,8 +712,7 @@
};
mmc3: mmc@11260000 {
- compatible = "mediatek,mt8173-mmc",
- "mediatek,mt8135-mmc";
+ compatible = "mediatek,mt8173-mmc";
reg = <0 0x11260000 0 0x1000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_3>,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* Re: [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-26 22:37 ` Ulf Hansson
-1 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:37 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> devicetree bindings has been updated to support multi-platforms,
> so that each platform has its owns compatible name.
> And, this compatible name may used in driver to distinguish with
> other platform.
This does not seems to be DT backwards compatible.
If the driver starts interpreting the "mt8135-mmc" differently,
wouldn't that lead to old DTBs to become broken?
Kind regards
Uffe
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index b99a273..26396ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -682,8 +682,7 @@
> };
>
> mmc0: mmc@11230000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11230000 0 0x1000>;
> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_0>,
> @@ -693,8 +692,7 @@
> };
>
> mmc1: mmc@11240000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11240000 0 0x1000>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_1>,
> @@ -704,8 +702,7 @@
> };
>
> mmc2: mmc@11250000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11250000 0 0x1000>;
> interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_2>,
> @@ -715,8 +712,7 @@
> };
>
> mmc3: mmc@11260000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11260000 0 0x1000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_3>,
> --
> 1.8.1.1.dirty
>
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
@ 2017-09-26 22:37 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:37 UTC (permalink / raw)
To: linux-arm-kernel
On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> devicetree bindings has been updated to support multi-platforms,
> so that each platform has its owns compatible name.
> And, this compatible name may used in driver to distinguish with
> other platform.
This does not seems to be DT backwards compatible.
If the driver starts interpreting the "mt8135-mmc" differently,
wouldn't that lead to old DTBs to become broken?
Kind regards
Uffe
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index b99a273..26396ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -682,8 +682,7 @@
> };
>
> mmc0: mmc at 11230000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11230000 0 0x1000>;
> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_0>,
> @@ -693,8 +692,7 @@
> };
>
> mmc1: mmc at 11240000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11240000 0 0x1000>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_1>,
> @@ -704,8 +702,7 @@
> };
>
> mmc2: mmc at 11250000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11250000 0 0x1000>;
> interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_2>,
> @@ -715,8 +712,7 @@
> };
>
> mmc3: mmc at 11260000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11260000 0 0x1000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_3>,
> --
> 1.8.1.1.dirty
>
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
@ 2017-09-26 22:37 ` Ulf Hansson
0 siblings, 0 replies; 75+ messages in thread
From: Ulf Hansson @ 2017-09-26 22:37 UTC (permalink / raw)
To: Chaotian Jing
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> devicetree bindings has been updated to support multi-platforms,
> so that each platform has its owns compatible name.
> And, this compatible name may used in driver to distinguish with
> other platform.
This does not seems to be DT backwards compatible.
If the driver starts interpreting the "mt8135-mmc" differently,
wouldn't that lead to old DTBs to become broken?
Kind regards
Uffe
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index b99a273..26396ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -682,8 +682,7 @@
> };
>
> mmc0: mmc@11230000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11230000 0 0x1000>;
> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_0>,
> @@ -693,8 +692,7 @@
> };
>
> mmc1: mmc@11240000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11240000 0 0x1000>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_1>,
> @@ -704,8 +702,7 @@
> };
>
> mmc2: mmc@11250000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11250000 0 0x1000>;
> interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_2>,
> @@ -715,8 +712,7 @@
> };
>
> mmc3: mmc@11260000 {
> - compatible = "mediatek,mt8173-mmc",
> - "mediatek,mt8135-mmc";
> + compatible = "mediatek,mt8173-mmc";
> reg = <0 0x11260000 0 0x1000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_MSDC30_3>,
> --
> 1.8.1.1.dirty
>
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
2017-09-26 22:37 ` Ulf Hansson
(?)
@ 2017-09-27 1:14 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:14 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-27 at 00:37 +0200, Ulf Hansson wrote:
> On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > devicetree bindings has been updated to support multi-platforms,
> > so that each platform has its owns compatible name.
> > And, this compatible name may used in driver to distinguish with
> > other platform.
>
> This does not seems to be DT backwards compatible.
>
> If the driver starts interpreting the "mt8135-mmc" differently,
> wouldn't that lead to old DTBs to become broken?
>
> Kind regards
> Uffe
At patch 03/12, it shows that no difference between "mt8135-mmc" and
"mt8173-mmc", and following changes will make difference between these
two.
but, the user should update DTS & driver together,then will do not have
compatible issue.
>
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> > 1 file changed, 4 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index b99a273..26396ef 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -682,8 +682,7 @@
> > };
> >
> > mmc0: mmc@11230000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11230000 0 0x1000>;
> > interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_0>,
> > @@ -693,8 +692,7 @@
> > };
> >
> > mmc1: mmc@11240000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11240000 0 0x1000>;
> > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_1>,
> > @@ -704,8 +702,7 @@
> > };
> >
> > mmc2: mmc@11250000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11250000 0 0x1000>;
> > interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_2>,
> > @@ -715,8 +712,7 @@
> > };
> >
> > mmc3: mmc@11260000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11260000 0 0x1000>;
> > interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_3>,
> > --
> > 1.8.1.1.dirty
> >
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
@ 2017-09-27 1:14 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:14 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2017-09-27 at 00:37 +0200, Ulf Hansson wrote:
> On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > devicetree bindings has been updated to support multi-platforms,
> > so that each platform has its owns compatible name.
> > And, this compatible name may used in driver to distinguish with
> > other platform.
>
> This does not seems to be DT backwards compatible.
>
> If the driver starts interpreting the "mt8135-mmc" differently,
> wouldn't that lead to old DTBs to become broken?
>
> Kind regards
> Uffe
At patch 03/12, it shows that no difference between "mt8135-mmc" and
"mt8173-mmc", and following changes will make difference between these
two.
but, the user should update DTS & driver together,then will do not have
compatible issue.
>
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> > 1 file changed, 4 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index b99a273..26396ef 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -682,8 +682,7 @@
> > };
> >
> > mmc0: mmc at 11230000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11230000 0 0x1000>;
> > interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_0>,
> > @@ -693,8 +692,7 @@
> > };
> >
> > mmc1: mmc at 11240000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11240000 0 0x1000>;
> > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_1>,
> > @@ -704,8 +702,7 @@
> > };
> >
> > mmc2: mmc at 11250000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11250000 0 0x1000>;
> > interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_2>,
> > @@ -715,8 +712,7 @@
> > };
> >
> > mmc3: mmc at 11260000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11260000 0 0x1000>;
> > interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_3>,
> > --
> > 1.8.1.1.dirty
> >
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 02/12] arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
@ 2017-09-27 1:14 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-27 1:14 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
On Wed, 2017-09-27 at 00:37 +0200, Ulf Hansson wrote:
> On 12 September 2017 at 11:07, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> > devicetree bindings has been updated to support multi-platforms,
> > so that each platform has its owns compatible name.
> > And, this compatible name may used in driver to distinguish with
> > other platform.
>
> This does not seems to be DT backwards compatible.
>
> If the driver starts interpreting the "mt8135-mmc" differently,
> wouldn't that lead to old DTBs to become broken?
>
> Kind regards
> Uffe
At patch 03/12, it shows that no difference between "mt8135-mmc" and
"mt8173-mmc", and following changes will make difference between these
two.
but, the user should update DTS & driver together,then will do not have
compatible issue.
>
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 ++++--------
> > 1 file changed, 4 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index b99a273..26396ef 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -682,8 +682,7 @@
> > };
> >
> > mmc0: mmc@11230000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11230000 0 0x1000>;
> > interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_0>,
> > @@ -693,8 +692,7 @@
> > };
> >
> > mmc1: mmc@11240000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11240000 0 0x1000>;
> > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_1>,
> > @@ -704,8 +702,7 @@
> > };
> >
> > mmc2: mmc@11250000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11250000 0 0x1000>;
> > interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_2>,
> > @@ -715,8 +712,7 @@
> > };
> >
> > mmc3: mmc@11260000 {
> > - compatible = "mediatek,mt8173-mmc",
> > - "mediatek,mt8135-mmc";
> > + compatible = "mediatek,mt8173-mmc";
> > reg = <0 0x11260000 0 0x1000>;
> > interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
> > clocks = <&pericfg CLK_PERI_MSDC30_3>,
> > --
> > 1.8.1.1.dirty
> >
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2701/mt2712 has 12bit clock div, which is not compatible with
mt8135/mt8173. and, some additional features will be added in
mt2701/mt2712, so that need distinguish it by comatibale name.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 69 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 267f7ab..643c795 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -95,6 +95,9 @@
#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
+#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
+#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
+#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
/* MSDC_IOCON mask */
#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
@@ -295,6 +298,10 @@ struct msdc_save_para {
u32 emmc50_cfg0;
};
+struct mtk_mmc_compatible {
+ u8 clk_div_bits;
+};
+
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
@@ -309,6 +316,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
+ const struct mtk_mmc_compatible *dev_comp;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -350,6 +358,31 @@ struct msdc_host {
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
};
+static const struct mtk_mmc_compatible mt8135_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt8173_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt2701_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct mtk_mmc_compatible mt2712_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct of_device_id msdc_of_ids[] = {
+ { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
+ { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
+ { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
+ { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
+ {}
+};
+MODULE_DEVICE_TABLE(of, msdc_of_ids);
+
static void sdr_set_bits(void __iomem *reg, u32 bs)
{
u32 val = readl(reg);
@@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
timeout = (ns + clk_ns - 1) / clk_ns + clks;
/* in 1048576 sclk cycle unit */
timeout = (timeout + (0x1 << 20) - 1) >> 20;
- sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD, &mode);
+ else
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA, &mode);
/*DDR mode will double the clk cycles for data timeout */
timeout = mode >= 2 ? timeout * 2 : timeout;
timeout = timeout > 1 ? timeout - 1 : 0;
@@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
flags = readl(host->base + MSDC_INTEN);
sdr_clr_bits(host->base + MSDC_INTEN, flags);
- sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_clr_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
if (timing == MMC_TIMING_UHS_DDR50 ||
timing == MMC_TIMING_MMC_DDR52 ||
timing == MMC_TIMING_MMC_HS400) {
@@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
if (timing == MMC_TIMING_MMC_HS400 &&
hz >= (host->src_clk_freq >> 1)) {
- sdr_set_bits(host->base + MSDC_CFG,
- MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
sclk = host->src_clk_freq >> 1;
div = 0; /* div is ignore when bit18 is set */
}
@@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
- sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
- (mode << 8) | div);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
+ (mode << 8) | div);
+ else
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
+ (mode << 12) | div);
+
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
@@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
struct mmc_host *mmc;
struct msdc_host *host;
struct resource *res;
+ const struct of_device_id *of_id;
int ret;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "No DT found\n");
return -EINVAL;
}
+
+ of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
/* Allocate MMC host for this device */
mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
if (!mmc)
@@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
msdc_of_property_parse(pdev, host);
host->dev = &pdev->dev;
+ host->dev_comp = of_id->data;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
- mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ if (host->dev_comp->clk_div_bits == 8)
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ else
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
/* MMC core transfer sizes tunable parameters */
@@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
};
-static const struct of_device_id msdc_of_ids[] = {
- { .compatible = "mediatek,mt8135-mmc", },
- {}
-};
-MODULE_DEVICE_TABLE(of, msdc_of_ids);
-
static struct platform_driver mt_msdc_driver = {
.probe = msdc_drv_probe,
.remove = msdc_drv_remove,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
mt2701/mt2712 has 12bit clock div, which is not compatible with
mt8135/mt8173. and, some additional features will be added in
mt2701/mt2712, so that need distinguish it by comatibale name.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 69 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 267f7ab..643c795 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -95,6 +95,9 @@
#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
+#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
+#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
+#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
/* MSDC_IOCON mask */
#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
@@ -295,6 +298,10 @@ struct msdc_save_para {
u32 emmc50_cfg0;
};
+struct mtk_mmc_compatible {
+ u8 clk_div_bits;
+};
+
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
@@ -309,6 +316,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
+ const struct mtk_mmc_compatible *dev_comp;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -350,6 +358,31 @@ struct msdc_host {
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
};
+static const struct mtk_mmc_compatible mt8135_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt8173_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt2701_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct mtk_mmc_compatible mt2712_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct of_device_id msdc_of_ids[] = {
+ { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
+ { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
+ { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
+ { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
+ {}
+};
+MODULE_DEVICE_TABLE(of, msdc_of_ids);
+
static void sdr_set_bits(void __iomem *reg, u32 bs)
{
u32 val = readl(reg);
@@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
timeout = (ns + clk_ns - 1) / clk_ns + clks;
/* in 1048576 sclk cycle unit */
timeout = (timeout + (0x1 << 20) - 1) >> 20;
- sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD, &mode);
+ else
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA, &mode);
/*DDR mode will double the clk cycles for data timeout */
timeout = mode >= 2 ? timeout * 2 : timeout;
timeout = timeout > 1 ? timeout - 1 : 0;
@@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
flags = readl(host->base + MSDC_INTEN);
sdr_clr_bits(host->base + MSDC_INTEN, flags);
- sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_clr_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
if (timing == MMC_TIMING_UHS_DDR50 ||
timing == MMC_TIMING_MMC_DDR52 ||
timing == MMC_TIMING_MMC_HS400) {
@@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
if (timing == MMC_TIMING_MMC_HS400 &&
hz >= (host->src_clk_freq >> 1)) {
- sdr_set_bits(host->base + MSDC_CFG,
- MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
sclk = host->src_clk_freq >> 1;
div = 0; /* div is ignore when bit18 is set */
}
@@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
- sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
- (mode << 8) | div);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
+ (mode << 8) | div);
+ else
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
+ (mode << 12) | div);
+
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
@@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
struct mmc_host *mmc;
struct msdc_host *host;
struct resource *res;
+ const struct of_device_id *of_id;
int ret;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "No DT found\n");
return -EINVAL;
}
+
+ of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
/* Allocate MMC host for this device */
mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
if (!mmc)
@@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
msdc_of_property_parse(pdev, host);
host->dev = &pdev->dev;
+ host->dev_comp = of_id->data;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
- mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ if (host->dev_comp->clk_div_bits == 8)
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ else
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
/* MMC core transfer sizes tunable parameters */
@@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
};
-static const struct of_device_id msdc_of_ids[] = {
- { .compatible = "mediatek,mt8135-mmc", },
- {}
-};
-MODULE_DEVICE_TABLE(of, msdc_of_ids);
-
static struct platform_driver mt_msdc_driver = {
.probe = msdc_drv_probe,
.remove = msdc_drv_remove,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2701/mt2712 has 12bit clock div, which is not compatible with
mt8135/mt8173. and, some additional features will be added in
mt2701/mt2712, so that need distinguish it by comatibale name.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 69 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 267f7ab..643c795 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -95,6 +95,9 @@
#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
+#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
+#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
+#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
/* MSDC_IOCON mask */
#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
@@ -295,6 +298,10 @@ struct msdc_save_para {
u32 emmc50_cfg0;
};
+struct mtk_mmc_compatible {
+ u8 clk_div_bits;
+};
+
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
@@ -309,6 +316,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
+ const struct mtk_mmc_compatible *dev_comp;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -350,6 +358,31 @@ struct msdc_host {
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
};
+static const struct mtk_mmc_compatible mt8135_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt8173_compat = {
+ .clk_div_bits = 8,
+};
+
+static const struct mtk_mmc_compatible mt2701_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct mtk_mmc_compatible mt2712_compat = {
+ .clk_div_bits = 12,
+};
+
+static const struct of_device_id msdc_of_ids[] = {
+ { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
+ { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
+ { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
+ { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
+ {}
+};
+MODULE_DEVICE_TABLE(of, msdc_of_ids);
+
static void sdr_set_bits(void __iomem *reg, u32 bs)
{
u32 val = readl(reg);
@@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
timeout = (ns + clk_ns - 1) / clk_ns + clks;
/* in 1048576 sclk cycle unit */
timeout = (timeout + (0x1 << 20) - 1) >> 20;
- sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD, &mode);
+ else
+ sdr_get_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA, &mode);
/*DDR mode will double the clk cycles for data timeout */
timeout = mode >= 2 ? timeout * 2 : timeout;
timeout = timeout > 1 ? timeout - 1 : 0;
@@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
flags = readl(host->base + MSDC_INTEN);
sdr_clr_bits(host->base + MSDC_INTEN, flags);
- sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_clr_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
if (timing == MMC_TIMING_UHS_DDR50 ||
timing == MMC_TIMING_MMC_DDR52 ||
timing == MMC_TIMING_MMC_HS400) {
@@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
if (timing == MMC_TIMING_MMC_HS400 &&
hz >= (host->src_clk_freq >> 1)) {
- sdr_set_bits(host->base + MSDC_CFG,
- MSDC_CFG_HS400_CK_MODE);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE);
+ else
+ sdr_set_bits(host->base + MSDC_CFG,
+ MSDC_CFG_HS400_CK_MODE_EXTRA);
sclk = host->src_clk_freq >> 1;
div = 0; /* div is ignore when bit18 is set */
}
@@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
- sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
- (mode << 8) | div);
+ if (host->dev_comp->clk_div_bits == 8)
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
+ (mode << 8) | div);
+ else
+ sdr_set_field(host->base + MSDC_CFG,
+ MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
+ (mode << 12) | div);
+
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
@@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
struct mmc_host *mmc;
struct msdc_host *host;
struct resource *res;
+ const struct of_device_id *of_id;
int ret;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "No DT found\n");
return -EINVAL;
}
+
+ of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
/* Allocate MMC host for this device */
mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
if (!mmc)
@@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
msdc_of_property_parse(pdev, host);
host->dev = &pdev->dev;
+ host->dev_comp = of_id->data;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
- mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ if (host->dev_comp->clk_div_bits == 8)
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
+ else
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
/* MMC core transfer sizes tunable parameters */
@@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
};
-static const struct of_device_id msdc_of_ids[] = {
- { .compatible = "mediatek,mt8135-mmc", },
- {}
-};
-MODULE_DEVICE_TABLE(of, msdc_of_ids);
-
static struct platform_driver mt_msdc_driver = {
.probe = msdc_drv_probe,
.remove = msdc_drv_remove,
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* Re: [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-26 1:38 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-26 1:38 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
Hi Ulf,
Sorry to disturb you, Do you have some comments of these series of
patch ?
Thx!
On Tue, 2017-09-12 at 17:07 +0800, Chaotian Jing wrote:
> mt2701/mt2712 has 12bit clock div, which is not compatible with
> mt8135/mt8173. and, some additional features will be added in
> mt2701/mt2712, so that need distinguish it by comatibale name.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 69 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 267f7ab..643c795 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -95,6 +95,9 @@
> #define MSDC_CFG_CKDIV (0xff << 8) /* RW */
> #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
> #define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
> +#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
> +#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
> +#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
>
> /* MSDC_IOCON mask */
> #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
> @@ -295,6 +298,10 @@ struct msdc_save_para {
> u32 emmc50_cfg0;
> };
>
> +struct mtk_mmc_compatible {
> + u8 clk_div_bits;
> +};
> +
> struct msdc_tune_para {
> u32 iocon;
> u32 pad_tune;
> @@ -309,6 +316,7 @@ struct msdc_delay_phase {
>
> struct msdc_host {
> struct device *dev;
> + const struct mtk_mmc_compatible *dev_comp;
> struct mmc_host *mmc; /* mmc structure */
> int cmd_rsp;
>
> @@ -350,6 +358,31 @@ struct msdc_host {
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> };
>
> +static const struct mtk_mmc_compatible mt8135_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt8173_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt2701_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct mtk_mmc_compatible mt2712_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct of_device_id msdc_of_ids[] = {
> + { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
> + { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> + { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
> + { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, msdc_of_ids);
> +
> static void sdr_set_bits(void __iomem *reg, u32 bs)
> {
> u32 val = readl(reg);
> @@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> timeout = (ns + clk_ns - 1) / clk_ns + clks;
> /* in 1048576 sclk cycle unit */
> timeout = (timeout + (0x1 << 20) - 1) >> 20;
> - sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD, &mode);
> + else
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA, &mode);
> /*DDR mode will double the clk cycles for data timeout */
> timeout = mode >= 2 ? timeout * 2 : timeout;
> timeout = timeout > 1 ? timeout - 1 : 0;
> @@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> flags = readl(host->base + MSDC_INTEN);
> sdr_clr_bits(host->base + MSDC_INTEN, flags);
> - sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_clr_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> if (timing == MMC_TIMING_UHS_DDR50 ||
> timing == MMC_TIMING_MMC_DDR52 ||
> timing == MMC_TIMING_MMC_HS400) {
> @@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> if (timing == MMC_TIMING_MMC_HS400 &&
> hz >= (host->src_clk_freq >> 1)) {
> - sdr_set_bits(host->base + MSDC_CFG,
> - MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> sclk = host->src_clk_freq >> 1;
> div = 0; /* div is ignore when bit18 is set */
> }
> @@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
> sclk = (host->src_clk_freq >> 2) / div;
> }
> }
> - sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> - (mode << 8) | div);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> + (mode << 8) | div);
> + else
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
> + (mode << 12) | div);
> +
> sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> cpu_relax();
> @@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
> struct mmc_host *mmc;
> struct msdc_host *host;
> struct resource *res;
> + const struct of_device_id *of_id;
> int ret;
>
> if (!pdev->dev.of_node) {
> dev_err(&pdev->dev, "No DT found\n");
> return -EINVAL;
> }
> +
> + of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
> + if (!of_id)
> + return -EINVAL;
> /* Allocate MMC host for this device */
> mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
> if (!mmc)
> @@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
> msdc_of_property_parse(pdev, host);
>
> host->dev = &pdev->dev;
> + host->dev_comp = of_id->data;
> host->mmc = mmc;
> host->src_clk_freq = clk_get_rate(host->src_clk);
> /* Set host parameters to mmc */
> mmc->ops = &mt_msdc_ops;
> - mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + if (host->dev_comp->clk_div_bits == 8)
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + else
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> /* MMC core transfer sizes tunable parameters */
> @@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
> SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
> };
>
> -static const struct of_device_id msdc_of_ids[] = {
> - { .compatible = "mediatek,mt8135-mmc", },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, msdc_of_ids);
> -
> static struct platform_driver mt_msdc_driver = {
> .probe = msdc_drv_probe,
> .remove = msdc_drv_remove,
^ permalink raw reply [flat|nested] 75+ messages in thread* [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-26 1:38 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-26 1:38 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ulf,
Sorry to disturb you, Do you have some comments of these series of
patch ?
Thx!
On Tue, 2017-09-12 at 17:07 +0800, Chaotian Jing wrote:
> mt2701/mt2712 has 12bit clock div, which is not compatible with
> mt8135/mt8173. and, some additional features will be added in
> mt2701/mt2712, so that need distinguish it by comatibale name.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 69 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 267f7ab..643c795 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -95,6 +95,9 @@
> #define MSDC_CFG_CKDIV (0xff << 8) /* RW */
> #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
> #define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
> +#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
> +#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
> +#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
>
> /* MSDC_IOCON mask */
> #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
> @@ -295,6 +298,10 @@ struct msdc_save_para {
> u32 emmc50_cfg0;
> };
>
> +struct mtk_mmc_compatible {
> + u8 clk_div_bits;
> +};
> +
> struct msdc_tune_para {
> u32 iocon;
> u32 pad_tune;
> @@ -309,6 +316,7 @@ struct msdc_delay_phase {
>
> struct msdc_host {
> struct device *dev;
> + const struct mtk_mmc_compatible *dev_comp;
> struct mmc_host *mmc; /* mmc structure */
> int cmd_rsp;
>
> @@ -350,6 +358,31 @@ struct msdc_host {
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> };
>
> +static const struct mtk_mmc_compatible mt8135_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt8173_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt2701_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct mtk_mmc_compatible mt2712_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct of_device_id msdc_of_ids[] = {
> + { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
> + { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> + { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
> + { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, msdc_of_ids);
> +
> static void sdr_set_bits(void __iomem *reg, u32 bs)
> {
> u32 val = readl(reg);
> @@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> timeout = (ns + clk_ns - 1) / clk_ns + clks;
> /* in 1048576 sclk cycle unit */
> timeout = (timeout + (0x1 << 20) - 1) >> 20;
> - sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD, &mode);
> + else
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA, &mode);
> /*DDR mode will double the clk cycles for data timeout */
> timeout = mode >= 2 ? timeout * 2 : timeout;
> timeout = timeout > 1 ? timeout - 1 : 0;
> @@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> flags = readl(host->base + MSDC_INTEN);
> sdr_clr_bits(host->base + MSDC_INTEN, flags);
> - sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_clr_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> if (timing == MMC_TIMING_UHS_DDR50 ||
> timing == MMC_TIMING_MMC_DDR52 ||
> timing == MMC_TIMING_MMC_HS400) {
> @@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> if (timing == MMC_TIMING_MMC_HS400 &&
> hz >= (host->src_clk_freq >> 1)) {
> - sdr_set_bits(host->base + MSDC_CFG,
> - MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> sclk = host->src_clk_freq >> 1;
> div = 0; /* div is ignore when bit18 is set */
> }
> @@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
> sclk = (host->src_clk_freq >> 2) / div;
> }
> }
> - sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> - (mode << 8) | div);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> + (mode << 8) | div);
> + else
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
> + (mode << 12) | div);
> +
> sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> cpu_relax();
> @@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
> struct mmc_host *mmc;
> struct msdc_host *host;
> struct resource *res;
> + const struct of_device_id *of_id;
> int ret;
>
> if (!pdev->dev.of_node) {
> dev_err(&pdev->dev, "No DT found\n");
> return -EINVAL;
> }
> +
> + of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
> + if (!of_id)
> + return -EINVAL;
> /* Allocate MMC host for this device */
> mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
> if (!mmc)
> @@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
> msdc_of_property_parse(pdev, host);
>
> host->dev = &pdev->dev;
> + host->dev_comp = of_id->data;
> host->mmc = mmc;
> host->src_clk_freq = clk_get_rate(host->src_clk);
> /* Set host parameters to mmc */
> mmc->ops = &mt_msdc_ops;
> - mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + if (host->dev_comp->clk_div_bits == 8)
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + else
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> /* MMC core transfer sizes tunable parameters */
> @@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
> SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
> };
>
> -static const struct of_device_id msdc_of_ids[] = {
> - { .compatible = "mediatek,mt8135-mmc", },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, msdc_of_ids);
> -
> static struct platform_driver mt_msdc_driver = {
> .probe = msdc_drv_probe,
> .remove = msdc_drv_remove,
^ permalink raw reply [flat|nested] 75+ messages in thread* Re: [PATCH 03/12] mmc: mediatek: add support of mt2701/mt2712
@ 2017-09-26 1:38 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-26 1:38 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, yong mao, Linus Walleij, Javier Martinez Canillas,
Heiner Kallweit, Phong LE, linux-mmc, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, srv_heupstream
Hi Ulf,
Sorry to disturb you, Do you have some comments of these series of
patch ?
Thx!
On Tue, 2017-09-12 at 17:07 +0800, Chaotian Jing wrote:
> mt2701/mt2712 has 12bit clock div, which is not compatible with
> mt8135/mt8173. and, some additional features will be added in
> mt2701/mt2712, so that need distinguish it by comatibale name.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 82 +++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 69 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 267f7ab..643c795 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -95,6 +95,9 @@
> #define MSDC_CFG_CKDIV (0xff << 8) /* RW */
> #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
> #define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
> +#define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
> +#define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
> +#define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
>
> /* MSDC_IOCON mask */
> #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
> @@ -295,6 +298,10 @@ struct msdc_save_para {
> u32 emmc50_cfg0;
> };
>
> +struct mtk_mmc_compatible {
> + u8 clk_div_bits;
> +};
> +
> struct msdc_tune_para {
> u32 iocon;
> u32 pad_tune;
> @@ -309,6 +316,7 @@ struct msdc_delay_phase {
>
> struct msdc_host {
> struct device *dev;
> + const struct mtk_mmc_compatible *dev_comp;
> struct mmc_host *mmc; /* mmc structure */
> int cmd_rsp;
>
> @@ -350,6 +358,31 @@ struct msdc_host {
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> };
>
> +static const struct mtk_mmc_compatible mt8135_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt8173_compat = {
> + .clk_div_bits = 8,
> +};
> +
> +static const struct mtk_mmc_compatible mt2701_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct mtk_mmc_compatible mt2712_compat = {
> + .clk_div_bits = 12,
> +};
> +
> +static const struct of_device_id msdc_of_ids[] = {
> + { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
> + { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> + { .compatible = "mediatek,mt2701-mmc", .data = &mt2701_compat},
> + { .compatible = "mediatek,mt2712-mmc", .data = &mt2712_compat},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, msdc_of_ids);
> +
> static void sdr_set_bits(void __iomem *reg, u32 bs)
> {
> u32 val = readl(reg);
> @@ -509,7 +542,12 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> timeout = (ns + clk_ns - 1) / clk_ns + clks;
> /* in 1048576 sclk cycle unit */
> timeout = (timeout + (0x1 << 20) - 1) >> 20;
> - sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD, &mode);
> + else
> + sdr_get_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA, &mode);
> /*DDR mode will double the clk cycles for data timeout */
> timeout = mode >= 2 ? timeout * 2 : timeout;
> timeout = timeout > 1 ? timeout - 1 : 0;
> @@ -548,7 +586,11 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> flags = readl(host->base + MSDC_INTEN);
> sdr_clr_bits(host->base + MSDC_INTEN, flags);
> - sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_clr_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> if (timing == MMC_TIMING_UHS_DDR50 ||
> timing == MMC_TIMING_MMC_DDR52 ||
> timing == MMC_TIMING_MMC_HS400) {
> @@ -568,8 +610,12 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
>
> if (timing == MMC_TIMING_MMC_HS400 &&
> hz >= (host->src_clk_freq >> 1)) {
> - sdr_set_bits(host->base + MSDC_CFG,
> - MSDC_CFG_HS400_CK_MODE);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE);
> + else
> + sdr_set_bits(host->base + MSDC_CFG,
> + MSDC_CFG_HS400_CK_MODE_EXTRA);
> sclk = host->src_clk_freq >> 1;
> div = 0; /* div is ignore when bit18 is set */
> }
> @@ -587,8 +633,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
> sclk = (host->src_clk_freq >> 2) / div;
> }
> }
> - sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> - (mode << 8) | div);
> + if (host->dev_comp->clk_div_bits == 8)
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
> + (mode << 8) | div);
> + else
> + sdr_set_field(host->base + MSDC_CFG,
> + MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
> + (mode << 12) | div);
> +
> sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> cpu_relax();
> @@ -1617,12 +1670,17 @@ static int msdc_drv_probe(struct platform_device *pdev)
> struct mmc_host *mmc;
> struct msdc_host *host;
> struct resource *res;
> + const struct of_device_id *of_id;
> int ret;
>
> if (!pdev->dev.of_node) {
> dev_err(&pdev->dev, "No DT found\n");
> return -EINVAL;
> }
> +
> + of_id = of_match_node(msdc_of_ids, pdev->dev.of_node);
> + if (!of_id)
> + return -EINVAL;
> /* Allocate MMC host for this device */
> mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
> if (!mmc)
> @@ -1686,11 +1744,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
> msdc_of_property_parse(pdev, host);
>
> host->dev = &pdev->dev;
> + host->dev_comp = of_id->data;
> host->mmc = mmc;
> host->src_clk_freq = clk_get_rate(host->src_clk);
> /* Set host parameters to mmc */
> mmc->ops = &mt_msdc_ops;
> - mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + if (host->dev_comp->clk_div_bits == 8)
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
> + else
> + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
>
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> /* MMC core transfer sizes tunable parameters */
> @@ -1839,12 +1901,6 @@ static int msdc_runtime_resume(struct device *dev)
> SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
> };
>
> -static const struct of_device_id msdc_of_ids[] = {
> - { .compatible = "mediatek,mt8135-mmc", },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, msdc_of_ids);
> -
> static struct platform_driver mt_msdc_driver = {
> .probe = msdc_drv_probe,
> .remove = msdc_drv_remove,
^ permalink raw reply [flat|nested] 75+ messages in thread
* [PATCH 04/12] mmc: mediatek: make hs400_tune_response only for mt8173
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
the origin design of hs400_tune_response is for mt8173 because of
mt8173 has a special design. for doing that, we add a new member
"compatible", by now it's only for mt8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 643c795..e8f8ad9 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -317,6 +317,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
const struct mtk_mmc_compatible *dev_comp;
+ const char *compatible;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -666,7 +667,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
host->base + PAD_CMD_TUNE);
}
- if (timing == MMC_TIMING_MMC_HS400)
+ if (timing == MMC_TIMING_MMC_HS400 &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
sdr_set_field(host->base + PAD_CMD_TUNE,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs400_cmd_int_delay);
@@ -1594,7 +1596,8 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct msdc_host *host = mmc_priv(mmc);
int ret;
- if (host->hs400_mode)
+ if (host->hs400_mode &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
ret = hs400_tune_response(mmc, opcode);
else
ret = msdc_tune_response(mmc, opcode);
@@ -1745,6 +1748,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
host->dev = &pdev->dev;
host->dev_comp = of_id->data;
+ host->compatible = of_id->compatible;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 04/12] mmc: mediatek: make hs400_tune_response only for mt8173
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
the origin design of hs400_tune_response is for mt8173 because of
mt8173 has a special design. for doing that, we add a new member
"compatible", by now it's only for mt8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 643c795..e8f8ad9 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -317,6 +317,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
const struct mtk_mmc_compatible *dev_comp;
+ const char *compatible;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -666,7 +667,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
host->base + PAD_CMD_TUNE);
}
- if (timing == MMC_TIMING_MMC_HS400)
+ if (timing == MMC_TIMING_MMC_HS400 &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
sdr_set_field(host->base + PAD_CMD_TUNE,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs400_cmd_int_delay);
@@ -1594,7 +1596,8 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct msdc_host *host = mmc_priv(mmc);
int ret;
- if (host->hs400_mode)
+ if (host->hs400_mode &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
ret = hs400_tune_response(mmc, opcode);
else
ret = msdc_tune_response(mmc, opcode);
@@ -1745,6 +1748,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
host->dev = &pdev->dev;
host->dev_comp = of_id->data;
+ host->compatible = of_id->compatible;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 04/12] mmc: mediatek: make hs400_tune_response only for mt8173
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Mark Rutland, devicetree, srv_heupstream, Catalin Marinas,
Linus Walleij, Will Deacon, linux-kernel, yong mao, Phong LE,
Javier Martinez Canillas, Rob Herring, linux-mediatek,
linux-arm-kernel, Matthias Brugger, linux-mmc, Chaotian Jing,
Heiner Kallweit
the origin design of hs400_tune_response is for mt8173 because of
mt8173 has a special design. for doing that, we add a new member
"compatible", by now it's only for mt8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 643c795..e8f8ad9 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -317,6 +317,7 @@ struct msdc_delay_phase {
struct msdc_host {
struct device *dev;
const struct mtk_mmc_compatible *dev_comp;
+ const char *compatible;
struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
@@ -666,7 +667,8 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
host->base + PAD_CMD_TUNE);
}
- if (timing == MMC_TIMING_MMC_HS400)
+ if (timing == MMC_TIMING_MMC_HS400 &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
sdr_set_field(host->base + PAD_CMD_TUNE,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs400_cmd_int_delay);
@@ -1594,7 +1596,8 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct msdc_host *host = mmc_priv(mmc);
int ret;
- if (host->hs400_mode)
+ if (host->hs400_mode &&
+ !strcmp(host->compatible, "mediatek,mt8173-mmc"))
ret = hs400_tune_response(mmc, opcode);
else
ret = msdc_tune_response(mmc, opcode);
@@ -1745,6 +1748,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
host->dev = &pdev->dev;
host->dev_comp = of_id->data;
+ host->compatible = of_id->compatible;
host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 05/12] mmc: mediatek: add pad_tune0 support
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
from mt2701, the register of PAD_TUNE has been phased out,
while there is a new register of PAD_TUNE0
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 69 ++++++++++++++++++++++++++++++++++-------------
1 file changed, 51 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e8f8ad9..43144e1 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -75,6 +75,7 @@
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
#define MSDC_PAD_TUNE 0xec
+#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
@@ -300,6 +301,7 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
+ bool pad_tune0;
};
struct msdc_tune_para {
@@ -361,18 +363,22 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -577,6 +583,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
u32 flags;
u32 div;
u32 sclk;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
@@ -659,10 +669,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
*/
if (host->sclk <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->def_tune_para.pad_tune, host->base + tune_reg);
} else {
writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->saved_tune_para.pad_tune, host->base + tune_reg);
writel(host->saved_tune_para.pad_cmd_tune,
host->base + PAD_CMD_TUNE);
}
@@ -1220,7 +1230,10 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
static void msdc_init_hw(struct msdc_host *host)
{
u32 val;
+ u32 tune_reg = MSDC_PAD_TUNE;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
/* Configure to MMC/SD mode, clock free running */
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
@@ -1235,7 +1248,7 @@ static void msdc_init_hw(struct msdc_host *host)
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
- writel(0, host->base + MSDC_PAD_TUNE);
+ writel(0, host->base + tune_reg);
writel(0, host->base + MSDC_IOCON);
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
@@ -1255,7 +1268,7 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->def_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1398,18 +1411,22 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
struct msdc_delay_phase internal_delay_phase;
u8 final_delay, final_maxlen;
u32 internal_delay = 0;
+ u32 tune_reg = MSDC_PAD_TUNE;
int cmd_err;
int i, j;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs200_cmd_int_delay);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1433,7 +1450,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1458,12 +1475,12 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_maxlen = final_fall_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
@@ -1471,7 +1488,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY, i);
mmc_send_tuning(mmc, opcode, &cmd_err);
if (!cmd_err)
@@ -1479,7 +1496,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
internal_delay_phase = get_best_delay(host, internal_delay);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRRDLY,
internal_delay_phase.final_phase);
skip_internal:
dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
@@ -1541,12 +1558,16 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
+ u32 tune_reg = MSDC_PAD_TUNE;
int i, ret;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1561,7 +1582,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1574,14 +1595,14 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
@@ -1595,6 +1616,10 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
int ret;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (host->hs400_mode &&
!strcmp(host->compatible, "mediatek,mt8173-mmc"))
@@ -1612,7 +1637,7 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
}
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
return ret;
}
@@ -1854,10 +1879,14 @@ static int msdc_drv_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static void msdc_save_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
host->save_para.iocon = readl(host->base + MSDC_IOCON);
host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
- host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
@@ -1867,10 +1896,14 @@ static void msdc_save_reg(struct msdc_host *host)
static void msdc_restore_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
writel(host->save_para.iocon, host->base + MSDC_IOCON);
writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
- writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 05/12] mmc: mediatek: add pad_tune0 support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
from mt2701, the register of PAD_TUNE has been phased out,
while there is a new register of PAD_TUNE0
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 69 ++++++++++++++++++++++++++++++++++-------------
1 file changed, 51 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e8f8ad9..43144e1 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -75,6 +75,7 @@
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
#define MSDC_PAD_TUNE 0xec
+#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
@@ -300,6 +301,7 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
+ bool pad_tune0;
};
struct msdc_tune_para {
@@ -361,18 +363,22 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -577,6 +583,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
u32 flags;
u32 div;
u32 sclk;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
@@ -659,10 +669,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
*/
if (host->sclk <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->def_tune_para.pad_tune, host->base + tune_reg);
} else {
writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->saved_tune_para.pad_tune, host->base + tune_reg);
writel(host->saved_tune_para.pad_cmd_tune,
host->base + PAD_CMD_TUNE);
}
@@ -1220,7 +1230,10 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
static void msdc_init_hw(struct msdc_host *host)
{
u32 val;
+ u32 tune_reg = MSDC_PAD_TUNE;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
/* Configure to MMC/SD mode, clock free running */
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
@@ -1235,7 +1248,7 @@ static void msdc_init_hw(struct msdc_host *host)
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
- writel(0, host->base + MSDC_PAD_TUNE);
+ writel(0, host->base + tune_reg);
writel(0, host->base + MSDC_IOCON);
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
@@ -1255,7 +1268,7 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->def_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1398,18 +1411,22 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
struct msdc_delay_phase internal_delay_phase;
u8 final_delay, final_maxlen;
u32 internal_delay = 0;
+ u32 tune_reg = MSDC_PAD_TUNE;
int cmd_err;
int i, j;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs200_cmd_int_delay);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1433,7 +1450,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1458,12 +1475,12 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_maxlen = final_fall_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
@@ -1471,7 +1488,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY, i);
mmc_send_tuning(mmc, opcode, &cmd_err);
if (!cmd_err)
@@ -1479,7 +1496,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
internal_delay_phase = get_best_delay(host, internal_delay);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRRDLY,
internal_delay_phase.final_phase);
skip_internal:
dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
@@ -1541,12 +1558,16 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
+ u32 tune_reg = MSDC_PAD_TUNE;
int i, ret;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1561,7 +1582,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1574,14 +1595,14 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
@@ -1595,6 +1616,10 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
int ret;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (host->hs400_mode &&
!strcmp(host->compatible, "mediatek,mt8173-mmc"))
@@ -1612,7 +1637,7 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
}
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
return ret;
}
@@ -1854,10 +1879,14 @@ static int msdc_drv_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static void msdc_save_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
host->save_para.iocon = readl(host->base + MSDC_IOCON);
host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
- host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
@@ -1867,10 +1896,14 @@ static void msdc_save_reg(struct msdc_host *host)
static void msdc_restore_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
writel(host->save_para.iocon, host->base + MSDC_IOCON);
writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
- writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 05/12] mmc: mediatek: add pad_tune0 support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
from mt2701, the register of PAD_TUNE has been phased out,
while there is a new register of PAD_TUNE0
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 69 ++++++++++++++++++++++++++++++++++-------------
1 file changed, 51 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e8f8ad9..43144e1 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -75,6 +75,7 @@
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
#define MSDC_PAD_TUNE 0xec
+#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
@@ -300,6 +301,7 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
+ bool pad_tune0;
};
struct msdc_tune_para {
@@ -361,18 +363,22 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
+ .pad_tune0 = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
+ .pad_tune0 = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -577,6 +583,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
u32 flags;
u32 div;
u32 sclk;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
@@ -659,10 +669,10 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
*/
if (host->sclk <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->def_tune_para.pad_tune, host->base + tune_reg);
} else {
writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
- writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->saved_tune_para.pad_tune, host->base + tune_reg);
writel(host->saved_tune_para.pad_cmd_tune,
host->base + PAD_CMD_TUNE);
}
@@ -1220,7 +1230,10 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
static void msdc_init_hw(struct msdc_host *host)
{
u32 val;
+ u32 tune_reg = MSDC_PAD_TUNE;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
/* Configure to MMC/SD mode, clock free running */
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
@@ -1235,7 +1248,7 @@ static void msdc_init_hw(struct msdc_host *host)
val = readl(host->base + MSDC_INT);
writel(val, host->base + MSDC_INT);
- writel(0, host->base + MSDC_PAD_TUNE);
+ writel(0, host->base + tune_reg);
writel(0, host->base + MSDC_IOCON);
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
@@ -1255,7 +1268,7 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->def_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1398,18 +1411,22 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
struct msdc_delay_phase internal_delay_phase;
u8 final_delay, final_maxlen;
u32 internal_delay = 0;
+ u32 tune_reg = MSDC_PAD_TUNE;
int cmd_err;
int i, j;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs200_cmd_int_delay);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1433,7 +1450,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRDLY, i);
/*
* Using the same parameters, it may sometimes pass the test,
@@ -1458,12 +1475,12 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_maxlen = final_fall_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
@@ -1471,7 +1488,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY, i);
mmc_send_tuning(mmc, opcode, &cmd_err);
if (!cmd_err)
@@ -1479,7 +1496,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
internal_delay_phase = get_best_delay(host, internal_delay);
- sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
+ sdr_set_field(host->base + tune_reg, MSDC_PAD_TUNE_CMDRRDLY,
internal_delay_phase.final_phase);
skip_internal:
dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
@@ -1541,12 +1558,16 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
+ u32 tune_reg = MSDC_PAD_TUNE;
int i, ret;
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
+
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1561,7 +1582,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY, i);
ret = mmc_send_tuning(mmc, opcode, NULL);
if (!ret)
@@ -1574,14 +1595,14 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_rise_delay.final_phase);
final_delay = final_rise_delay.final_phase;
} else {
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
- sdr_set_field(host->base + MSDC_PAD_TUNE,
+ sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_DATRRDLY,
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
@@ -1595,6 +1616,10 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
int ret;
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
if (host->hs400_mode &&
!strcmp(host->compatible, "mediatek,mt8173-mmc"))
@@ -1612,7 +1637,7 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
}
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
- host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
return ret;
}
@@ -1854,10 +1879,14 @@ static int msdc_drv_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static void msdc_save_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
host->save_para.iocon = readl(host->base + MSDC_IOCON);
host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
- host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+ host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
@@ -1867,10 +1896,14 @@ static void msdc_save_reg(struct msdc_host *host)
static void msdc_restore_reg(struct msdc_host *host)
{
+ u32 tune_reg = MSDC_PAD_TUNE;
+
+ if (host->dev_comp->pad_tune0)
+ tune_reg = MSDC_PAD_TUNE0;
writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
writel(host->save_para.iocon, host->base + MSDC_IOCON);
writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
- writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
+ writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 06/12] mmc: mediatek: add async fifo and data tune support
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2701/mt2712 supports async fifo & data tune, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 43144e1..e7462fe 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -74,6 +74,7 @@
#define MSDC_DMA_CFG 0x9c
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
+#define MSDC_PATCH_BIT2 0xb8
#define MSDC_PAD_TUNE 0xec
#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
@@ -216,11 +217,20 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
+#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
+#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
+#define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
+#define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
+
#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
+#define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
+#define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
+#define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
@@ -294,6 +304,7 @@ struct msdc_save_para {
u32 pad_tune;
u32 patch_bit0;
u32 patch_bit1;
+ u32 patch_bit2;
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
@@ -302,6 +313,8 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
bool pad_tune0;
+ bool async_fifo;
+ bool data_tune;
};
struct msdc_tune_para {
@@ -364,21 +377,29 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1253,8 +1274,29 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
+ writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->async_fifo) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPWAIT, 3);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ /* use async fifo, then no need tune internal delay */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGRESP);
+ sdr_set_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGCRCSTS);
+ }
+
+ if (host->dev_comp->data_tune) {
+ sdr_set_bits(host->base + tune_reg,
+ MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
+ } else {
+ /* choose clock tune */
+ sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
+ }
/* Configure to enable SDIO mode.
* it's must otherwise sdio cmd5 failed
@@ -1269,6 +1311,8 @@ static void msdc_init_hw(struct msdc_host *host)
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->def_tune_para.pad_tune = readl(host->base + tune_reg);
+ host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1484,7 +1528,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
- if (host->hs200_cmd_int_delay)
+ if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
@@ -1648,6 +1692,8 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
host->hs400_mode = true;
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ /* hs400 mode must set it to 0 */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
return 0;
}
@@ -1889,6 +1935,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
+ host->save_para.patch_bit2 = readl(host->base + MSDC_PATCH_BIT2);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
@@ -1906,6 +1953,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
+ writel(host->save_para.patch_bit2, host->base + MSDC_PATCH_BIT2);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 06/12] mmc: mediatek: add async fifo and data tune support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
mt2701/mt2712 supports async fifo & data tune, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 43144e1..e7462fe 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -74,6 +74,7 @@
#define MSDC_DMA_CFG 0x9c
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
+#define MSDC_PATCH_BIT2 0xb8
#define MSDC_PAD_TUNE 0xec
#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
@@ -216,11 +217,20 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
+#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
+#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
+#define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
+#define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
+
#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
+#define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
+#define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
+#define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
@@ -294,6 +304,7 @@ struct msdc_save_para {
u32 pad_tune;
u32 patch_bit0;
u32 patch_bit1;
+ u32 patch_bit2;
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
@@ -302,6 +313,8 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
bool pad_tune0;
+ bool async_fifo;
+ bool data_tune;
};
struct msdc_tune_para {
@@ -364,21 +377,29 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1253,8 +1274,29 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
+ writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->async_fifo) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPWAIT, 3);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ /* use async fifo, then no need tune internal delay */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGRESP);
+ sdr_set_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGCRCSTS);
+ }
+
+ if (host->dev_comp->data_tune) {
+ sdr_set_bits(host->base + tune_reg,
+ MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
+ } else {
+ /* choose clock tune */
+ sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
+ }
/* Configure to enable SDIO mode.
* it's must otherwise sdio cmd5 failed
@@ -1269,6 +1311,8 @@ static void msdc_init_hw(struct msdc_host *host)
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->def_tune_para.pad_tune = readl(host->base + tune_reg);
+ host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1484,7 +1528,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
- if (host->hs200_cmd_int_delay)
+ if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
@@ -1648,6 +1692,8 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
host->hs400_mode = true;
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ /* hs400 mode must set it to 0 */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
return 0;
}
@@ -1889,6 +1935,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
+ host->save_para.patch_bit2 = readl(host->base + MSDC_PATCH_BIT2);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
@@ -1906,6 +1953,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
+ writel(host->save_para.patch_bit2, host->base + MSDC_PATCH_BIT2);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 06/12] mmc: mediatek: add async fifo and data tune support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2701/mt2712 supports async fifo & data tune, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 43144e1..e7462fe 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -74,6 +74,7 @@
#define MSDC_DMA_CFG 0x9c
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
+#define MSDC_PATCH_BIT2 0xb8
#define MSDC_PAD_TUNE 0xec
#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
@@ -216,11 +217,20 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
+#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
+#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
+#define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
+#define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
+
#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
+#define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
+#define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
+#define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
@@ -294,6 +304,7 @@ struct msdc_save_para {
u32 pad_tune;
u32 patch_bit0;
u32 patch_bit1;
+ u32 patch_bit2;
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
@@ -302,6 +313,8 @@ struct msdc_save_para {
struct mtk_mmc_compatible {
u8 clk_div_bits;
bool pad_tune0;
+ bool async_fifo;
+ bool data_tune;
};
struct msdc_tune_para {
@@ -364,21 +377,29 @@ struct msdc_host {
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1253,8 +1274,29 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
+ writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->async_fifo) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPWAIT, 3);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ /* use async fifo, then no need tune internal delay */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGRESP);
+ sdr_set_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGCRCSTS);
+ }
+
+ if (host->dev_comp->data_tune) {
+ sdr_set_bits(host->base + tune_reg,
+ MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
+ } else {
+ /* choose clock tune */
+ sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
+ }
/* Configure to enable SDIO mode.
* it's must otherwise sdio cmd5 failed
@@ -1269,6 +1311,8 @@ static void msdc_init_hw(struct msdc_host *host)
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->def_tune_para.pad_tune = readl(host->base + tune_reg);
+ host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1484,7 +1528,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
- if (host->hs200_cmd_int_delay)
+ if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
@@ -1648,6 +1692,8 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
host->hs400_mode = true;
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ /* hs400 mode must set it to 0 */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
return 0;
}
@@ -1889,6 +1935,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
+ host->save_para.patch_bit2 = readl(host->base + MSDC_PATCH_BIT2);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
@@ -1906,6 +1953,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
+ writel(host->save_para.patch_bit2, host->base + MSDC_PATCH_BIT2);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 07/12] mmc: mediatek: add busy_check support
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
bit7 of PATCH_BIT1 has different meaning in new design, to
compatible with previous platform, clear this bit in new
platform.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e7462fe..555824d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -315,6 +315,7 @@ struct mtk_mmc_compatible {
bool pad_tune0;
bool async_fifo;
bool data_tune;
+ bool busy_check;
};
struct msdc_tune_para {
@@ -379,6 +380,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -386,6 +388,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -393,6 +396,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -400,6 +404,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1276,6 +1281,8 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->busy_check)
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 07/12] mmc: mediatek: add busy_check support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
bit7 of PATCH_BIT1 has different meaning in new design, to
compatible with previous platform, clear this bit in new
platform.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e7462fe..555824d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -315,6 +315,7 @@ struct mtk_mmc_compatible {
bool pad_tune0;
bool async_fifo;
bool data_tune;
+ bool busy_check;
};
struct msdc_tune_para {
@@ -379,6 +380,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -386,6 +388,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -393,6 +396,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -400,6 +404,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1276,6 +1281,8 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->busy_check)
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 07/12] mmc: mediatek: add busy_check support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
bit7 of PATCH_BIT1 has different meaning in new design, to
compatible with previous platform, clear this bit in new
platform.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index e7462fe..555824d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -315,6 +315,7 @@ struct mtk_mmc_compatible {
bool pad_tune0;
bool async_fifo;
bool data_tune;
+ bool busy_check;
};
struct msdc_tune_para {
@@ -379,6 +380,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -386,6 +388,7 @@ struct msdc_host {
.pad_tune0 = false,
.async_fifo = false,
.data_tune = false,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -393,6 +396,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -400,6 +404,7 @@ struct msdc_host {
.pad_tune0 = true,
.async_fifo = true,
.data_tune = true,
+ .busy_check = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1276,6 +1281,8 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->busy_check)
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 08/12] mmc: mediatek: add stop_clk fix and enhance_rx support
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2712 supports stop_clk fix and enhance_rx, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 555824d..5d99e05 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -67,6 +67,7 @@
#define SDC_RESP2 0x48
#define SDC_RESP3 0x4c
#define SDC_BLK_NUM 0x50
+#define SDC_ADV_CFG0 0x64
#define EMMC_IOCON 0x7c
#define SDC_ACMD_RESP 0x80
#define MSDC_DMA_SA 0x90
@@ -80,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
/* Register Mask */
@@ -188,6 +190,9 @@
#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
+/* SDC_ADV_CFG0 mask */
+#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */
+
/* MSDC_DMA_CTRL mask */
#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
@@ -217,6 +222,8 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
+
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
@@ -242,6 +249,9 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
+#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
+
#define REQ_CMD_EIO (0x1 << 0)
#define REQ_CMD_TMO (0x1 << 1)
#define REQ_DAT_ERR (0x1 << 2)
@@ -308,6 +318,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 sdc_fifo_cfg;
};
struct mtk_mmc_compatible {
@@ -316,6 +327,8 @@ struct mtk_mmc_compatible {
bool async_fifo;
bool data_tune;
bool busy_check;
+ bool stop_clk_fix;
+ bool enhance_rx;
};
struct msdc_tune_para {
@@ -381,6 +394,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -389,6 +404,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -397,6 +414,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -405,6 +424,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+
+ if (host->dev_comp->stop_clk_fix) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT1,
+ MSDC_PATCH_BIT1_STOP_DLY, 3);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_WRVALIDSEL);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_RDVALIDSEL);
+ }
+
if (host->dev_comp->busy_check)
sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
+
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_RESPSTSENSEL, 2);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_CRCSTSENSEL, 2);
+ if (host->dev_comp->enhance_rx) {
+ sdr_set_bits(host->base + SDC_ADV_CFG0,
+ SDC_RX_ENHANCE_EN);
+ } else {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ }
/* use async fifo, then no need tune internal delay */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
MSDC_PATCH_BIT2_CFGRESP);
@@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
static void msdc_restore_reg(struct msdc_host *host)
@@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
static int msdc_runtime_suspend(struct device *dev)
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 08/12] mmc: mediatek: add stop_clk fix and enhance_rx support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
mt2712 supports stop_clk fix and enhance_rx, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 555824d..5d99e05 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -67,6 +67,7 @@
#define SDC_RESP2 0x48
#define SDC_RESP3 0x4c
#define SDC_BLK_NUM 0x50
+#define SDC_ADV_CFG0 0x64
#define EMMC_IOCON 0x7c
#define SDC_ACMD_RESP 0x80
#define MSDC_DMA_SA 0x90
@@ -80,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
/* Register Mask */
@@ -188,6 +190,9 @@
#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
+/* SDC_ADV_CFG0 mask */
+#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */
+
/* MSDC_DMA_CTRL mask */
#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
@@ -217,6 +222,8 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
+
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
@@ -242,6 +249,9 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
+#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
+
#define REQ_CMD_EIO (0x1 << 0)
#define REQ_CMD_TMO (0x1 << 1)
#define REQ_DAT_ERR (0x1 << 2)
@@ -308,6 +318,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 sdc_fifo_cfg;
};
struct mtk_mmc_compatible {
@@ -316,6 +327,8 @@ struct mtk_mmc_compatible {
bool async_fifo;
bool data_tune;
bool busy_check;
+ bool stop_clk_fix;
+ bool enhance_rx;
};
struct msdc_tune_para {
@@ -381,6 +394,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -389,6 +404,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -397,6 +414,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -405,6 +424,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+
+ if (host->dev_comp->stop_clk_fix) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT1,
+ MSDC_PATCH_BIT1_STOP_DLY, 3);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_WRVALIDSEL);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_RDVALIDSEL);
+ }
+
if (host->dev_comp->busy_check)
sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
+
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_RESPSTSENSEL, 2);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_CRCSTSENSEL, 2);
+ if (host->dev_comp->enhance_rx) {
+ sdr_set_bits(host->base + SDC_ADV_CFG0,
+ SDC_RX_ENHANCE_EN);
+ } else {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ }
/* use async fifo, then no need tune internal delay */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
MSDC_PATCH_BIT2_CFGRESP);
@@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
static void msdc_restore_reg(struct msdc_host *host)
@@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
static int msdc_runtime_suspend(struct device *dev)
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 08/12] mmc: mediatek: add stop_clk fix and enhance_rx support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
mt2712 supports stop_clk fix and enhance_rx, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 555824d..5d99e05 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -67,6 +67,7 @@
#define SDC_RESP2 0x48
#define SDC_RESP3 0x4c
#define SDC_BLK_NUM 0x50
+#define SDC_ADV_CFG0 0x64
#define EMMC_IOCON 0x7c
#define SDC_ACMD_RESP 0x80
#define MSDC_DMA_SA 0x90
@@ -80,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
/* Register Mask */
@@ -188,6 +190,9 @@
#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
+/* SDC_ADV_CFG0 mask */
+#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */
+
/* MSDC_DMA_CTRL mask */
#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
@@ -217,6 +222,8 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
+
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
@@ -242,6 +249,9 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
+#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
+
#define REQ_CMD_EIO (0x1 << 0)
#define REQ_CMD_TMO (0x1 << 1)
#define REQ_DAT_ERR (0x1 << 2)
@@ -308,6 +318,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 sdc_fifo_cfg;
};
struct mtk_mmc_compatible {
@@ -316,6 +327,8 @@ struct mtk_mmc_compatible {
bool async_fifo;
bool data_tune;
bool busy_check;
+ bool stop_clk_fix;
+ bool enhance_rx;
};
struct msdc_tune_para {
@@ -381,6 +394,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
@@ -389,6 +404,8 @@ struct msdc_host {
.async_fifo = false,
.data_tune = false,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
@@ -397,6 +414,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = false,
+ .stop_clk_fix = false,
+ .enhance_rx = false,
};
static const struct mtk_mmc_compatible mt2712_compat = {
@@ -405,6 +424,8 @@ struct msdc_host {
.async_fifo = true,
.data_tune = true,
.busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+
+ if (host->dev_comp->stop_clk_fix) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT1,
+ MSDC_PATCH_BIT1_STOP_DLY, 3);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_WRVALIDSEL);
+ sdr_clr_bits(host->base + SDC_FIFO_CFG,
+ SDC_FIFO_CFG_RDVALIDSEL);
+ }
+
if (host->dev_comp->busy_check)
sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7));
+
if (host->dev_comp->async_fifo) {
sdr_set_field(host->base + MSDC_PATCH_BIT2,
MSDC_PB2_RESPWAIT, 3);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_RESPSTSENSEL, 2);
- sdr_set_field(host->base + MSDC_PATCH_BIT2,
- MSDC_PB2_CRCSTSENSEL, 2);
+ if (host->dev_comp->enhance_rx) {
+ sdr_set_bits(host->base + SDC_ADV_CFG0,
+ SDC_RX_ENHANCE_EN);
+ } else {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ }
/* use async fifo, then no need tune internal delay */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
MSDC_PATCH_BIT2_CFGRESP);
@@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
static void msdc_restore_reg(struct msdc_host *host)
@@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
static int msdc_runtime_suspend(struct device *dev)
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 09/12] mmc: mediatek: add support of source_cg clock
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
source clock need an independent cg to control, when doing clk mode
switch, need gate source clock to avoid hw issue(multi-bit sync hw hang)
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5d99e05..522fd0a 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -372,6 +372,7 @@ struct msdc_host {
struct clk *src_clk; /* msdc source clock */
struct clk *h_clk; /* msdc h_clk */
+ struct clk *src_clk_cg; /* msdc source clock control gate */
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
u32 sclk; /* SD/MS bus clock frequency */
@@ -612,6 +613,7 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
static void msdc_gate_clock(struct msdc_host *host)
{
+ clk_disable_unprepare(host->src_clk_cg);
clk_disable_unprepare(host->src_clk);
clk_disable_unprepare(host->h_clk);
}
@@ -620,6 +622,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
{
clk_prepare_enable(host->h_clk);
clk_prepare_enable(host->src_clk);
+ clk_prepare_enable(host->src_clk_cg);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
}
@@ -691,6 +694,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
+ /*
+ * As src_clk/HCLK use the same bit to gate/ungate,
+ * So if want to only gate src_clk, need gate its parent(mux).
+ */
+ if (host->src_clk_cg)
+ clk_disable_unprepare(host->src_clk_cg);
+ else
+ clk_disable_unprepare(clk_get_parent(host->src_clk));
if (host->dev_comp->clk_div_bits == 8)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
@@ -699,10 +711,14 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
(mode << 12) | div);
+ if (host->src_clk_cg)
+ clk_prepare_enable(host->src_clk_cg);
+ else
+ clk_prepare_enable(clk_get_parent(host->src_clk));
- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
+ sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
host->sclk = sclk;
host->mclk = hz;
host->timing = timing;
@@ -1832,6 +1848,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
goto host_free;
}
+ /*source clock control gate is optional clock*/
+ host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
+ if (IS_ERR(host->src_clk_cg))
+ host->src_clk_cg = NULL;
+
host->irq = platform_get_irq(pdev, 0);
if (host->irq < 0) {
ret = -EINVAL;
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 09/12] mmc: mediatek: add support of source_cg clock
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
source clock need an independent cg to control, when doing clk mode
switch, need gate source clock to avoid hw issue(multi-bit sync hw hang)
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5d99e05..522fd0a 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -372,6 +372,7 @@ struct msdc_host {
struct clk *src_clk; /* msdc source clock */
struct clk *h_clk; /* msdc h_clk */
+ struct clk *src_clk_cg; /* msdc source clock control gate */
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
u32 sclk; /* SD/MS bus clock frequency */
@@ -612,6 +613,7 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
static void msdc_gate_clock(struct msdc_host *host)
{
+ clk_disable_unprepare(host->src_clk_cg);
clk_disable_unprepare(host->src_clk);
clk_disable_unprepare(host->h_clk);
}
@@ -620,6 +622,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
{
clk_prepare_enable(host->h_clk);
clk_prepare_enable(host->src_clk);
+ clk_prepare_enable(host->src_clk_cg);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
}
@@ -691,6 +694,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
+ /*
+ * As src_clk/HCLK use the same bit to gate/ungate,
+ * So if want to only gate src_clk, need gate its parent(mux).
+ */
+ if (host->src_clk_cg)
+ clk_disable_unprepare(host->src_clk_cg);
+ else
+ clk_disable_unprepare(clk_get_parent(host->src_clk));
if (host->dev_comp->clk_div_bits == 8)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
@@ -699,10 +711,14 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
(mode << 12) | div);
+ if (host->src_clk_cg)
+ clk_prepare_enable(host->src_clk_cg);
+ else
+ clk_prepare_enable(clk_get_parent(host->src_clk));
- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
+ sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
host->sclk = sclk;
host->mclk = hz;
host->timing = timing;
@@ -1832,6 +1848,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
goto host_free;
}
+ /*source clock control gate is optional clock*/
+ host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
+ if (IS_ERR(host->src_clk_cg))
+ host->src_clk_cg = NULL;
+
host->irq = platform_get_irq(pdev, 0);
if (host->irq < 0) {
ret = -EINVAL;
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 09/12] mmc: mediatek: add support of source_cg clock
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w
source clock need an independent cg to control, when doing clk mode
switch, need gate source clock to avoid hw issue(multi-bit sync hw hang)
Signed-off-by: Chaotian Jing <chaotian.jing-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/mmc/host/mtk-sd.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5d99e05..522fd0a 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -372,6 +372,7 @@ struct msdc_host {
struct clk *src_clk; /* msdc source clock */
struct clk *h_clk; /* msdc h_clk */
+ struct clk *src_clk_cg; /* msdc source clock control gate */
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
u32 sclk; /* SD/MS bus clock frequency */
@@ -612,6 +613,7 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
static void msdc_gate_clock(struct msdc_host *host)
{
+ clk_disable_unprepare(host->src_clk_cg);
clk_disable_unprepare(host->src_clk);
clk_disable_unprepare(host->h_clk);
}
@@ -620,6 +622,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
{
clk_prepare_enable(host->h_clk);
clk_prepare_enable(host->src_clk);
+ clk_prepare_enable(host->src_clk_cg);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
}
@@ -691,6 +694,15 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sclk = (host->src_clk_freq >> 2) / div;
}
}
+ sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
+ /*
+ * As src_clk/HCLK use the same bit to gate/ungate,
+ * So if want to only gate src_clk, need gate its parent(mux).
+ */
+ if (host->src_clk_cg)
+ clk_disable_unprepare(host->src_clk_cg);
+ else
+ clk_disable_unprepare(clk_get_parent(host->src_clk));
if (host->dev_comp->clk_div_bits == 8)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
@@ -699,10 +711,14 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
sdr_set_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD_EXTRA | MSDC_CFG_CKDIV_EXTRA,
(mode << 12) | div);
+ if (host->src_clk_cg)
+ clk_prepare_enable(host->src_clk_cg);
+ else
+ clk_prepare_enable(clk_get_parent(host->src_clk));
- sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
+ sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
host->sclk = sclk;
host->mclk = hz;
host->timing = timing;
@@ -1832,6 +1848,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
goto host_free;
}
+ /*source clock control gate is optional clock*/
+ host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
+ if (IS_ERR(host->src_clk_cg))
+ host->src_clk_cg = NULL;
+
host->irq = platform_get_irq(pdev, 0);
if (host->irq < 0) {
ret = -EINVAL;
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 10/12] mmc: mediatek: add latch-ck support
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
some platform(eg.mt2701) does not support "stop clk fix", in
this case, need set correct latch-ck to avoid crc error caused
by stop clock block-internally.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 522fd0a..3328d59 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -378,6 +378,7 @@ struct msdc_host {
u32 sclk; /* SD/MS bus clock frequency */
unsigned char timing;
bool vqmmc_enabled;
+ u32 latch_ck;
u32 hs400_ds_delay;
u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
@@ -1668,6 +1669,8 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (host->dev_comp->pad_tune0)
tune_reg = MSDC_PAD_TUNE0;
+ sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_INT_DAT_LATCH_CK_SEL,
+ host->latch_ck);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
@@ -1783,6 +1786,9 @@ static void msdc_hw_reset(struct mmc_host *mmc)
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
+ of_property_read_u32(pdev->dev.of_node, "mediatek,latch-ck",
+ &host->latch_ck);
+
of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
&host->hs400_ds_delay);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 10/12] mmc: mediatek: add latch-ck support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
some platform(eg.mt2701) does not support "stop clk fix", in
this case, need set correct latch-ck to avoid crc error caused
by stop clock block-internally.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 522fd0a..3328d59 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -378,6 +378,7 @@ struct msdc_host {
u32 sclk; /* SD/MS bus clock frequency */
unsigned char timing;
bool vqmmc_enabled;
+ u32 latch_ck;
u32 hs400_ds_delay;
u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
@@ -1668,6 +1669,8 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (host->dev_comp->pad_tune0)
tune_reg = MSDC_PAD_TUNE0;
+ sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_INT_DAT_LATCH_CK_SEL,
+ host->latch_ck);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
@@ -1783,6 +1786,9 @@ static void msdc_hw_reset(struct mmc_host *mmc)
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
+ of_property_read_u32(pdev->dev.of_node, "mediatek,latch-ck",
+ &host->latch_ck);
+
of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
&host->hs400_ds_delay);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 10/12] mmc: mediatek: add latch-ck support
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
some platform(eg.mt2701) does not support "stop clk fix", in
this case, need set correct latch-ck to avoid crc error caused
by stop clock block-internally.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 522fd0a..3328d59 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -378,6 +378,7 @@ struct msdc_host {
u32 sclk; /* SD/MS bus clock frequency */
unsigned char timing;
bool vqmmc_enabled;
+ u32 latch_ck;
u32 hs400_ds_delay;
u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
@@ -1668,6 +1669,8 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (host->dev_comp->pad_tune0)
tune_reg = MSDC_PAD_TUNE0;
+ sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_INT_DAT_LATCH_CK_SEL,
+ host->latch_ck);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
@@ -1783,6 +1786,9 @@ static void msdc_hw_reset(struct mmc_host *mmc)
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
+ of_property_read_u32(pdev->dev.of_node, "mediatek,latch-ck",
+ &host->latch_ck);
+
of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
&host->hs400_ds_delay);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 11/12] mmc: mediatek: improve eMMC hs400 mode read performance
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
enlarge outstanding value to improve read performance
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 3328d59..49d4d79 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -81,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define EMMC50_CFG3 0x220
#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
@@ -249,6 +250,8 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define EMMC50_CFG3_OUTS_WR (0x1f << 0) /* RW */
+
#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
@@ -318,6 +321,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 emmc50_cfg3;
u32 sdc_fifo_cfg;
};
@@ -1757,6 +1761,9 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
/* hs400 mode must set it to 0 */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
+ /* to improve read performance, set outstanding to 2 */
+ sdr_set_field(host->base + EMMC50_CFG3, EMMC50_CFG3_OUTS_WR, 2);
+
return 0;
}
@@ -2010,6 +2017,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.emmc50_cfg3 = readl(host->base + EMMC50_CFG3);
host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
@@ -2029,6 +2037,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.emmc50_cfg3, host->base + EMMC50_CFG3);
writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 11/12] mmc: mediatek: improve eMMC hs400 mode read performance
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
enlarge outstanding value to improve read performance
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 3328d59..49d4d79 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -81,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define EMMC50_CFG3 0x220
#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
@@ -249,6 +250,8 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define EMMC50_CFG3_OUTS_WR (0x1f << 0) /* RW */
+
#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
@@ -318,6 +321,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 emmc50_cfg3;
u32 sdc_fifo_cfg;
};
@@ -1757,6 +1761,9 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
/* hs400 mode must set it to 0 */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
+ /* to improve read performance, set outstanding to 2 */
+ sdr_set_field(host->base + EMMC50_CFG3, EMMC50_CFG3_OUTS_WR, 2);
+
return 0;
}
@@ -2010,6 +2017,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.emmc50_cfg3 = readl(host->base + EMMC50_CFG3);
host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
@@ -2029,6 +2037,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.emmc50_cfg3, host->base + EMMC50_CFG3);
writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread* [PATCH 11/12] mmc: mediatek: improve eMMC hs400 mode read performance
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
enlarge outstanding value to improve read performance
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 3328d59..49d4d79 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -81,6 +81,7 @@
#define PAD_DS_TUNE 0x188
#define PAD_CMD_TUNE 0x18c
#define EMMC50_CFG0 0x208
+#define EMMC50_CFG3 0x220
#define SDC_FIFO_CFG 0x228
/*--------------------------------------------------------------------------*/
@@ -249,6 +250,8 @@
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
+#define EMMC50_CFG3_OUTS_WR (0x1f << 0) /* RW */
+
#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
@@ -318,6 +321,7 @@ struct msdc_save_para {
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
+ u32 emmc50_cfg3;
u32 sdc_fifo_cfg;
};
@@ -1757,6 +1761,9 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
/* hs400 mode must set it to 0 */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
+ /* to improve read performance, set outstanding to 2 */
+ sdr_set_field(host->base + EMMC50_CFG3, EMMC50_CFG3_OUTS_WR, 2);
+
return 0;
}
@@ -2010,6 +2017,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
+ host->save_para.emmc50_cfg3 = readl(host->base + EMMC50_CFG3);
host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG);
}
@@ -2029,6 +2037,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
+ writel(host->save_para.emmc50_cfg3, host->base + EMMC50_CFG3);
writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG);
}
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 12/12] mmc: mediatek: perfer to use rise edge latching for cmd line
2017-09-12 9:07 ` Chaotian Jing
(?)
@ 2017-09-12 9:07 ` Chaotian Jing
-1 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
data lines have applied to perfer to use rise edge, also need
apply it to cmd line.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 49d4d79..9f21cdb 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1554,7 +1554,8 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
- if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
+ if (final_rise_delay.maxlen >= 12 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 12/12] mmc: mediatek: perfer to use rise edge latching for cmd line
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: linux-arm-kernel
data lines have applied to perfer to use rise edge, also need
apply it to cmd line.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 49d4d79..9f21cdb 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1554,7 +1554,8 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
- if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
+ if (final_rise_delay.maxlen >= 12 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread
* [PATCH 12/12] mmc: mediatek: perfer to use rise edge latching for cmd line
@ 2017-09-12 9:07 ` Chaotian Jing
0 siblings, 0 replies; 75+ messages in thread
From: Chaotian Jing @ 2017-09-12 9:07 UTC (permalink / raw)
To: Ulf Hansson
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Catalin Marinas,
Will Deacon, Chaotian Jing, yong mao, Linus Walleij,
Javier Martinez Canillas, Heiner Kallweit, Phong LE, linux-mmc,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
srv_heupstream
data lines have applied to perfer to use rise edge, also need
apply it to cmd line.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 49d4d79..9f21cdb 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1554,7 +1554,8 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
- if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
+ if (final_rise_delay.maxlen >= 12 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 75+ messages in thread