From: David Wu <david.wu@rock-chips.com>
To: sjg@chromium.org, philipp.tomsich@theobroma-systems.com
Cc: huangtao@rock-chips.com, u-boot@lists.denx.de,
zhangqing@rock-chips.com, linux-rockchip@lists.infradead.org,
p.marczak@samsung.com, David Wu <david.wu@rock-chips.com>,
andy.yan@rock-chips.com, chenjh@rock-chips.com
Subject: [PATCH 0/8] Add rockchip Saradc support
Date: Wed, 13 Sep 2017 18:09:31 +0800 [thread overview]
Message-ID: <1505297379-12638-1-git-send-email-david.wu@rock-chips.com> (raw)
The Saradc is used for adc keys and charging detect at uboot
loader. Except for the rk3036 and rk3228 Socs, the others
support the Saradc IP.
David Wu (8):
adc: Add driver for Rockchip saradc
configs: rockchip: Enable the ROCKCHIP_SARADC config
clk: rockchip: Add rv1108 SARADC clock support
clk: rockchip: Add SARADC clock support for rk3288
clk: rockchip: Add rk3328 SRAADC clock support
clk: rockchip: Add rk3368 SARADC clock support
clk: rockchip: Add rk3399 SARADC clock support
arm: dts: rv1108: Add saradc node at dtsi level
arch/arm/dts/rv1108.dtsi | 11 ++
arch/arm/include/asm/arch-rockchip/cru_rk3368.h | 5 +
arch/arm/include/asm/arch-rockchip/cru_rv1108.h | 5 +
configs/evb-rk3288_defconfig | 2 +
configs/evb-rk3328_defconfig | 2 +
configs/evb-rk3399_defconfig | 2 +
configs/evb-rv1108_defconfig | 2 +
configs/fennec-rk3288_defconfig | 2 +
configs/firefly-rk3288_defconfig | 2 +
configs/firefly-rk3399_defconfig | 2 +
configs/lion-rk3368_defconfig | 2 +
configs/miqi-rk3288_defconfig | 2 +
configs/phycore-rk3288_defconfig | 2 +
configs/popmetal-rk3288_defconfig | 2 +
configs/puma-rk3399_defconfig | 2 +
configs/sheep-rk3368_defconfig | 2 +
configs/tinker-rk3288_defconfig | 2 +
drivers/adc/Kconfig | 9 ++
drivers/adc/Makefile | 1 +
drivers/adc/rockchip-saradc.c | 188 ++++++++++++++++++++++++
drivers/clk/rockchip/clk_rk3288.c | 45 ++++++
drivers/clk/rockchip/clk_rk3328.c | 37 +++++
drivers/clk/rockchip/clk_rk3368.c | 31 ++++
drivers/clk/rockchip/clk_rk3399.c | 33 +++++
drivers/clk/rockchip/clk_rv1108.c | 35 +++++
include/dt-bindings/clock/rv1108-cru.h | 2 +
26 files changed, 430 insertions(+)
create mode 100644 drivers/adc/rockchip-saradc.c
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
WARNING: multiple messages have this Message-ID (diff)
From: David Wu <david.wu@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/8] Add rockchip Saradc support
Date: Wed, 13 Sep 2017 18:09:31 +0800 [thread overview]
Message-ID: <1505297379-12638-1-git-send-email-david.wu@rock-chips.com> (raw)
The Saradc is used for adc keys and charging detect at uboot
loader. Except for the rk3036 and rk3228 Socs, the others
support the Saradc IP.
David Wu (8):
adc: Add driver for Rockchip saradc
configs: rockchip: Enable the ROCKCHIP_SARADC config
clk: rockchip: Add rv1108 SARADC clock support
clk: rockchip: Add SARADC clock support for rk3288
clk: rockchip: Add rk3328 SRAADC clock support
clk: rockchip: Add rk3368 SARADC clock support
clk: rockchip: Add rk3399 SARADC clock support
arm: dts: rv1108: Add saradc node at dtsi level
arch/arm/dts/rv1108.dtsi | 11 ++
arch/arm/include/asm/arch-rockchip/cru_rk3368.h | 5 +
arch/arm/include/asm/arch-rockchip/cru_rv1108.h | 5 +
configs/evb-rk3288_defconfig | 2 +
configs/evb-rk3328_defconfig | 2 +
configs/evb-rk3399_defconfig | 2 +
configs/evb-rv1108_defconfig | 2 +
configs/fennec-rk3288_defconfig | 2 +
configs/firefly-rk3288_defconfig | 2 +
configs/firefly-rk3399_defconfig | 2 +
configs/lion-rk3368_defconfig | 2 +
configs/miqi-rk3288_defconfig | 2 +
configs/phycore-rk3288_defconfig | 2 +
configs/popmetal-rk3288_defconfig | 2 +
configs/puma-rk3399_defconfig | 2 +
configs/sheep-rk3368_defconfig | 2 +
configs/tinker-rk3288_defconfig | 2 +
drivers/adc/Kconfig | 9 ++
drivers/adc/Makefile | 1 +
drivers/adc/rockchip-saradc.c | 188 ++++++++++++++++++++++++
drivers/clk/rockchip/clk_rk3288.c | 45 ++++++
drivers/clk/rockchip/clk_rk3328.c | 37 +++++
drivers/clk/rockchip/clk_rk3368.c | 31 ++++
drivers/clk/rockchip/clk_rk3399.c | 33 +++++
drivers/clk/rockchip/clk_rv1108.c | 35 +++++
include/dt-bindings/clock/rv1108-cru.h | 2 +
26 files changed, 430 insertions(+)
create mode 100644 drivers/adc/rockchip-saradc.c
--
2.7.4
next reply other threads:[~2017-09-13 10:09 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-13 10:09 David Wu [this message]
2017-09-13 10:09 ` [U-Boot] [PATCH 0/8] Add rockchip Saradc support David Wu
[not found] ` <1505297379-12638-1-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-09-13 10:09 ` [PATCH 1/8] adc: Add driver for Rockchip Saradc David Wu
2017-09-13 10:09 ` [U-Boot] " David Wu
[not found] ` <1505297379-12638-2-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-09-13 20:07 ` [U-Boot,1/8] " Philipp Tomsich
2017-09-13 20:07 ` [U-Boot] " Philipp Tomsich
2017-09-13 20:40 ` Philipp Tomsich
2017-09-13 20:40 ` [U-Boot] " Philipp Tomsich
2017-09-13 10:09 ` [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config David Wu
2017-09-13 10:09 ` [U-Boot] " David Wu
2017-09-13 10:20 ` Dr. Philipp Tomsich
2017-09-13 10:20 ` [U-Boot] " Dr. Philipp Tomsich
2017-09-13 10:09 ` [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288 David Wu
2017-09-13 10:09 ` [U-Boot] " David Wu
2017-09-13 10:24 ` Dr. Philipp Tomsich
2017-09-13 10:24 ` [U-Boot] " Dr. Philipp Tomsich
2017-09-13 10:26 ` Dr. Philipp Tomsich
2017-09-13 10:26 ` [U-Boot] " Dr. Philipp Tomsich
[not found] ` <1505297379-12638-5-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-09-13 20:07 ` [U-Boot,4/8] " Philipp Tomsich
2017-09-13 20:07 ` [U-Boot] [U-Boot, 4/8] " Philipp Tomsich
2017-09-13 10:52 ` [PATCH 5/8] clk: rockchip: Add rk3328 Saradc clock support David Wu
2017-09-13 10:52 ` [U-Boot] " David Wu
[not found] ` <1505299969-13329-1-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-09-13 20:07 ` [U-Boot,5/8] " Philipp Tomsich
2017-09-13 20:07 ` [U-Boot] [U-Boot, 5/8] " Philipp Tomsich
2017-09-13 20:44 ` Philipp Tomsich
2017-09-13 20:44 ` [U-Boot] " Philipp Tomsich
2017-09-13 10:09 ` [PATCH 3/8] clk: rockchip: Add rv1108 " David Wu
2017-09-13 10:09 ` [U-Boot] " David Wu
[not found] ` <1505297379-12638-4-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-09-13 20:07 ` [U-Boot,3/8] " Philipp Tomsich
2017-09-13 20:07 ` [U-Boot] [U-Boot, 3/8] " Philipp Tomsich
2017-09-13 20:45 ` Philipp Tomsich
2017-09-13 20:45 ` [U-Boot] " Philipp Tomsich
2017-09-13 11:32 ` [U-Boot] [PATCH 6/8] clk: rockchip: Add rk3368 " David Wu
2017-09-13 20:07 ` [U-Boot] [U-Boot, " Philipp Tomsich
2017-09-13 20:41 ` Philipp Tomsich
2017-09-13 20:44 ` Dr. Philipp Tomsich
2017-09-14 11:17 ` David.Wu
2017-09-14 14:55 ` Dr. Philipp Tomsich
2017-09-13 11:33 ` [U-Boot] [PATCH 7/8] clk: rockchip: Add rk3399 " David Wu
2017-09-13 20:07 ` [U-Boot] [U-Boot, " Philipp Tomsich
2017-09-13 20:42 ` Philipp Tomsich
2017-09-13 11:35 ` [U-Boot] [PATCH 8/8] arm: dts: rv1108: Add Saradc node at dtsi level David Wu
2017-09-13 20:07 ` [U-Boot] [U-Boot, " Philipp Tomsich
2017-09-13 20:08 ` Philipp Tomsich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1505297379-12638-1-git-send-email-david.wu@rock-chips.com \
--to=david.wu@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=chenjh@rock-chips.com \
--cc=huangtao@rock-chips.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=p.marczak@samsung.com \
--cc=philipp.tomsich@theobroma-systems.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.