All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sagar Arun Kamble <sagar.a.kamble@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 04/11] drm/i915: Separate RPS and RC6 handling for VLV
Date: Fri,  6 Oct 2017 17:43:33 +0530	[thread overview]
Message-ID: <1507292020-14212-5-git-send-email-sagar.a.kamble@intel.com> (raw)
In-Reply-To: <1507292020-14212-1-git-send-email-sagar.a.kamble@intel.com>

This patch separates enable/disable of RC6 and RPS for VLV.

v2: Removed unnecessary comments about forcewakes while enabling
RC6/RPS. Added changes to output turbo control status for VLV in
i915_frequency_info.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 24 +++++++--------
 drivers/gpu/drm/i915/intel_pm.c     | 61 ++++++++++++++++++++++++-------------
 2 files changed, 51 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index ca65600..142474a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1042,9 +1042,19 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		seq_printf(m, "Current P-state: %d\n",
 			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
-		u32 freq_sts;
+		u32 rpmodectl, freq_sts;
 
 		mutex_lock(&dev_priv->rps.hw_lock);
+
+		rpmodectl = I915_READ(GEN6_RP_CONTROL);
+		seq_printf(m, "Video Turbo Mode: %s\n",
+			   yesno(rpmodectl & GEN6_RP_MEDIA_TURBO));
+		seq_printf(m, "HW control enabled: %s\n",
+			   yesno(rpmodectl & GEN6_RP_ENABLE));
+		seq_printf(m, "SW control enabled: %s\n",
+			   yesno((rpmodectl & GEN6_RP_MEDIA_MODE_MASK) ==
+				  GEN6_RP_MEDIA_SW_MODE));
+
 		freq_sts = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
 		seq_printf(m, "PUNIT_REG_GPU_FREQ_STS: 0x%08x\n", freq_sts);
 		seq_printf(m, "DDR freq: %d MHz\n", dev_priv->mem_freq);
@@ -1455,21 +1465,11 @@ static void print_rc6_res(struct seq_file *m,
 static int vlv_drpc_info(struct seq_file *m)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	u32 rpmodectl1, rcctl1, pw_status;
+	u32 rcctl1, pw_status;
 
 	pw_status = I915_READ(VLV_GTLC_PW_STATUS);
-	rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
 	rcctl1 = I915_READ(GEN6_RC_CONTROL);
 
-	seq_printf(m, "Video Turbo Mode: %s\n",
-		   yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
-	seq_printf(m, "Turbo enabled: %s\n",
-		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
-	seq_printf(m, "HW control enabled: %s\n",
-		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
-	seq_printf(m, "SW control enabled: %s\n",
-		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
-			  GEN6_RP_MEDIA_SW_MODE));
 	seq_printf(m, "RC6 Enabled: %s\n",
 		   yesno(rcctl1 & (GEN7_RC_CTL_TO_MODE |
 					GEN6_RC_CTL_EI_MODE(1))));
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e26e9db..a55cee4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6348,9 +6348,9 @@ static void cherryview_disable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RC_CONTROL, 0);
 }
 
-static void valleyview_disable_rps(struct drm_i915_private *dev_priv)
+static void valleyview_disable_rc6(struct drm_i915_private *dev_priv)
 {
-	/* we're doing forcewake before Disabling RC6,
+	/* We're doing forcewake before Disabling RC6,
 	 * This what the BIOS expects when going into suspend */
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
 
@@ -6359,6 +6359,11 @@ static void valleyview_disable_rps(struct drm_i915_private *dev_priv)
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
 }
 
+static void valleyview_disable_rps(struct drm_i915_private *dev_priv)
+{
+	I915_WRITE(GEN6_RP_CONTROL, 0);
+}
+
 static void intel_print_rc6_info(struct drm_i915_private *dev_priv, u32 mode)
 {
 	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
@@ -7282,11 +7287,11 @@ static void cherryview_enable_rps(struct drm_i915_private *dev_priv)
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
 }
 
-static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
+static void valleyview_enable_rc6(struct drm_i915_private *dev_priv)
 {
 	struct intel_engine_cs *engine;
 	enum intel_engine_id id;
-	u32 gtfifodbg, val, rc6_mode = 0;
+	u32 gtfifodbg, rc6_mode = 0;
 
 	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
 
@@ -7299,28 +7304,11 @@ static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
 		I915_WRITE(GTFIFODBG, gtfifodbg);
 	}
 
-	/* If VLV, Forcewake all wells, else re-direct to regular path */
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
 
 	/*  Disable RC states. */
 	I915_WRITE(GEN6_RC_CONTROL, 0);
 
-	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
-	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
-	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
-	I915_WRITE(GEN6_RP_UP_EI, 66000);
-	I915_WRITE(GEN6_RP_DOWN_EI, 350000);
-
-	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
-
-	I915_WRITE(GEN6_RP_CONTROL,
-		   GEN6_RP_MEDIA_TURBO |
-		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
-		   GEN6_RP_MEDIA_IS_GFX |
-		   GEN6_RP_ENABLE |
-		   GEN6_RP_UP_BUSY_AVG |
-		   GEN6_RP_DOWN_IDLE_CONT);
-
 	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
 	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
 	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
@@ -7330,7 +7318,7 @@ static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
 
 	I915_WRITE(GEN6_RC6_THRESHOLD, 0x557);
 
-	/* allows RC6 residency counter to work */
+	/* Allows RC6 residency counter to work */
 	I915_WRITE(VLV_COUNTER_CONTROL,
 		   _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
 				      VLV_MEDIA_RC0_COUNT_EN |
@@ -7345,6 +7333,33 @@ static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
 
 	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
 
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+}
+
+static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
+{
+	u32 val;
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
+	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
+	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
+	I915_WRITE(GEN6_RP_UP_EI, 66000);
+	I915_WRITE(GEN6_RP_DOWN_EI, 350000);
+
+	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
+
+	I915_WRITE(GEN6_RP_CONTROL,
+		   GEN6_RP_MEDIA_TURBO |
+		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
+		   GEN6_RP_MEDIA_IS_GFX |
+		   GEN6_RP_ENABLE |
+		   GEN6_RP_UP_BUSY_AVG |
+		   GEN6_RP_DOWN_IDLE_CONT);
+
 	/* Setting Fixed Bias */
 	val = VLV_OVERRIDE_EN |
 		  VLV_SOC_TDP_EN |
@@ -7944,6 +7959,7 @@ void intel_disable_gt_powersave(struct drm_i915_private *dev_priv)
 	} else if (IS_CHERRYVIEW(dev_priv)) {
 		cherryview_disable_rps(dev_priv);
 	} else if (IS_VALLEYVIEW(dev_priv)) {
+		valleyview_disable_rc6(dev_priv);
 		valleyview_disable_rps(dev_priv);
 	} else if (INTEL_GEN(dev_priv) >= 6) {
 		gen6_disable_rc6(dev_priv);
@@ -7973,6 +7989,7 @@ void intel_enable_gt_powersave(struct drm_i915_private *dev_priv)
 	if (IS_CHERRYVIEW(dev_priv)) {
 		cherryview_enable_rps(dev_priv);
 	} else if (IS_VALLEYVIEW(dev_priv)) {
+		valleyview_enable_rc6(dev_priv);
 		valleyview_enable_rps(dev_priv);
 	} else if (INTEL_GEN(dev_priv) >= 9) {
 		gen9_enable_rc6(dev_priv);
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-10-06 12:10 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 12:13 [PATCH v2 00/11] drm/i915: Separate RC6, RPS, LLC ring Frequency management Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 01/11] drm/i915: Separate RPS and RC6 handling for gen6+ Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 02/11] drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps Sagar Arun Kamble
2017-10-06 12:24   ` Chris Wilson
2017-10-06 12:13 ` [PATCH v2 03/11] drm/i915: Separate RPS and RC6 handling for BDW Sagar Arun Kamble
2017-10-06 12:13 ` Sagar Arun Kamble [this message]
2017-10-06 12:13 ` [PATCH v2 05/11] drm/i915: Separate RPS and RC6 handling for CHV Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 06/11] drm/i915: Name i915_runtime_pm structure in dev_priv as "rpm" Sagar Arun Kamble
2017-10-06 12:40   ` Chris Wilson
2017-10-06 15:00     ` Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 07/11] drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "pm" Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 08/11] drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 09/11] drm/i915: Create generic function to setup LLC ring frequency table Sagar Arun Kamble
2017-10-06 12:43   ` Chris Wilson
2017-10-06 12:13 ` [PATCH v2 10/11] drm/i915: Create generic functions to control RC6, RPS Sagar Arun Kamble
2017-10-06 12:46   ` Chris Wilson
2017-10-06 15:02     ` Sagar Arun Kamble
2017-10-06 12:13 ` [PATCH v2 11/11] drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup Sagar Arun Kamble
2017-10-06 12:55   ` Chris Wilson
2017-10-06 15:08     ` Sagar Arun Kamble
2017-10-06 14:10 ` ✓ Fi.CI.BAT: success for drm/i915: Separate RC6, RPS, LLC ring Frequency management Patchwork
2017-10-06 18:06 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507292020-14212-5-git-send-email-sagar.a.kamble@intel.com \
    --to=sagar.a.kamble@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.