* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-21 9:45 ` Bhaskar Upadhaya
0 siblings, 0 replies; 8+ messages in thread
From: Bhaskar Upadhaya @ 2017-11-21 9:45 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA, shawnguo-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Bhaskar Upadhaya
LS1012A-2G5RDB is similar to LS1012ARDB with below features
2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC
QuadSPI, UART
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
2 files changed, 67 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 72c4b52..b3a0aec 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 0000000..99b1835
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <bhaskar.upadhaya-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A 2G5RDB Board";
+ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-21 9:45 ` Bhaskar Upadhaya
0 siblings, 0 replies; 8+ messages in thread
From: Bhaskar Upadhaya @ 2017-11-21 9:45 UTC (permalink / raw)
To: linux-arm-kernel
LS1012A-2G5RDB is similar to LS1012ARDB with below features
2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC
QuadSPI, UART
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
2 files changed, 67 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 72c4b52..b3a0aec 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 0000000..99b1835
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A 2G5RDB Board";
+ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread[parent not found: <1511257503-12475-1-git-send-email-Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>]
* Re: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
2017-11-21 9:45 ` Bhaskar Upadhaya
@ 2017-11-29 3:27 ` Shawn Guo
-1 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2017-11-29 3:27 UTC (permalink / raw)
To: Bhaskar Upadhaya
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Tue, Nov 21, 2017 at 03:15:03PM +0530, Bhaskar Upadhaya wrote:
> LS1012A-2G5RDB is similar to LS1012ARDB with below features
> 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC
> QuadSPI, UART
>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 72c4b52..b3a0aec 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
Please maintain the order in alphabet.
Shawn
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> new file mode 100644
> index 0000000..99b1835
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> @@ -0,0 +1,66 @@
> +/*
> + * Device Tree file for NXP LS1012A 2G5RDB Board.
> + *
> + * Copyright 2017 NXP
> + *
> + * Bhaskar Upadhaya <bhaskar.upadhaya-3arQi8VN3Tc@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +/dts-v1/;
> +
> +#include "fsl-ls1012a.dtsi"
> +
> +/ {
> + model = "LS1012A 2G5RDB Board";
> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
> +
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-29 3:27 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2017-11-29 3:27 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 21, 2017 at 03:15:03PM +0530, Bhaskar Upadhaya wrote:
> LS1012A-2G5RDB is similar to LS1012ARDB with below features
> 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC
> QuadSPI, UART
>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 72c4b52..b3a0aec 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
Please maintain the order in alphabet.
Shawn
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> new file mode 100644
> index 0000000..99b1835
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> @@ -0,0 +1,66 @@
> +/*
> + * Device Tree file for NXP LS1012A 2G5RDB Board.
> + *
> + * Copyright 2017 NXP
> + *
> + * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +/dts-v1/;
> +
> +#include "fsl-ls1012a.dtsi"
> +
> +/ {
> + model = "LS1012A 2G5RDB Board";
> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
> +
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
2017-11-29 3:27 ` Shawn Guo
@ 2017-11-29 3:55 ` Bhaskar Upadhaya
-1 siblings, 0 replies; 8+ messages in thread
From: Bhaskar Upadhaya @ 2017-11-29 3:55 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
-----Original Message-----
From: Shawn Guo [mailto:shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org]
Sent: Wednesday, November 29, 2017 8:58 AM
To: Bhaskar Upadhaya <bhaskar.upadhaya-3arQi8VN3Tc@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
On Tue, Nov 21, 2017 at 03:15:03PM +0530, Bhaskar Upadhaya wrote:
> LS1012A-2G5RDB is similar to LS1012ARDB with below features
> 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC QuadSPI,
> UART
>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
> create mode 100644
> arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 72c4b52..b3a0aec 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
Please maintain the order in alphabet.
Shawn
[Bhaskar] OK, Will keep like below
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git
> a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> new file mode 100644
> index 0000000..99b1835
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> @@ -0,0 +1,66 @@
> +/*
> + * Device Tree file for NXP LS1012A 2G5RDB Board.
> + *
> + * Copyright 2017 NXP
> + *
> + * Bhaskar Upadhaya <bhaskar.upadhaya-3arQi8VN3Tc@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this
> +dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +/dts-v1/;
> +
> +#include "fsl-ls1012a.dtsi"
> +
> +/ {
> + model = "LS1012A 2G5RDB Board";
> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
> +
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist
> s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%7
> CBhaskar.Upadhaya%40nxp.com%7C409d0e6aad364cfb981708d536d92adb%7C686ea
> 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636475228707650079&sdata=4GdFrz7
> zM%2FVi7XrR6zjRXdbMi6XD2SABxBdtItT7zbA%3D&reserved=0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-29 3:55 ` Bhaskar Upadhaya
0 siblings, 0 replies; 8+ messages in thread
From: Bhaskar Upadhaya @ 2017-11-29 3:55 UTC (permalink / raw)
To: linux-arm-kernel
-----Original Message-----
From: Shawn Guo [mailto:shawnguo at kernel.org]
Sent: Wednesday, November 29, 2017 8:58 AM
To: Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
Cc: devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org
Subject: Re: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
On Tue, Nov 21, 2017 at 03:15:03PM +0530, Bhaskar Upadhaya wrote:
> LS1012A-2G5RDB is similar to LS1012ARDB with below features
> 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC QuadSPI,
> UART
>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 66 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
> create mode 100644
> arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 72c4b52..b3a0aec 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
Please maintain the order in alphabet.
Shawn
[Bhaskar] OK, Will keep like below
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git
> a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> new file mode 100644
> index 0000000..99b1835
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
> @@ -0,0 +1,66 @@
> +/*
> + * Device Tree file for NXP LS1012A 2G5RDB Board.
> + *
> + * Copyright 2017 NXP
> + *
> + * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this
> +dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +/dts-v1/;
> +
> +#include "fsl-ls1012a.dtsi"
> +
> +/ {
> + model = "LS1012A 2G5RDB Board";
> + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
> +
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist
> s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%7
> CBhaskar.Upadhaya%40nxp.com%7C409d0e6aad364cfb981708d536d92adb%7C686ea
> 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636475228707650079&sdata=4GdFrz7
> zM%2FVi7XrR6zjRXdbMi6XD2SABxBdtItT7zbA%3D&reserved=0
^ permalink raw reply [flat|nested] 8+ messages in thread[parent not found: <AM3PR04MB449B294AE2AC9A9A654E9718C3B0-f56W/S9L6NTAlRApo5URHQfhPeD8jYilXA4E9RH9d+qIuWR1G4zioA@public.gmane.org>]
* Re: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
2017-11-29 3:55 ` Bhaskar Upadhaya
@ 2017-11-29 5:49 ` Shawn Guo
-1 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2017-11-29 5:49 UTC (permalink / raw)
To: Bhaskar Upadhaya
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Wed, Nov 29, 2017 at 03:55:19AM +0000, Bhaskar Upadhaya wrote:
> [Bhaskar] OK, Will keep like below
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
'2' goes before 'f' in alphabet table, right?
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-29 5:49 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2017-11-29 5:49 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 29, 2017 at 03:55:19AM +0000, Bhaskar Upadhaya wrote:
> [Bhaskar] OK, Will keep like below
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
'2' goes before 'f' in alphabet table, right?
Shawn
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-11-29 5:49 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-21 9:45 [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support Bhaskar Upadhaya
2017-11-21 9:45 ` Bhaskar Upadhaya
[not found] ` <1511257503-12475-1-git-send-email-Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>
2017-11-29 3:27 ` Shawn Guo
2017-11-29 3:27 ` Shawn Guo
2017-11-29 3:55 ` Bhaskar Upadhaya
2017-11-29 3:55 ` Bhaskar Upadhaya
[not found] ` <AM3PR04MB449B294AE2AC9A9A654E9718C3B0-f56W/S9L6NTAlRApo5URHQfhPeD8jYilXA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2017-11-29 5:49 ` Shawn Guo
2017-11-29 5:49 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.