[PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

* [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support
@ 2017-11-21  9:45 ` Bhaskar Upadhaya
  0 siblings, 0 replies; 8+ messages in thread
From: Bhaskar Upadhaya @ 2017-11-21  9:45 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA, shawnguo-DgEjT+Ai2ygdnm+yROfE0A
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Bhaskar Upadhaya

LS1012A-2G5RDB is similar to LS1012ARDB with below features
2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC
QuadSPI, UART

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya-3arQi8VN3Tc@public.gmane.org>
---
 arch/arm64/boot/dts/freescale/Makefile             |  1 +
 .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 66 ++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 72c4b52..b3a0aec 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 0000000..99b1835
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <bhaskar.upadhaya-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 8+ messages in thread