[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

-- 
2.12.5

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

-- 
2.12.5

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
Basically, all changes are for the ECO design change of MT2712.

changes since v1:
- Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.

Weiyi Lu (5):
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: update power domain data of MT2712
  dt-bindings: clock: add clocks for MT2712
  arm64: dts: add clock device nodes of MT2712
  clk: mediatek: update clock driver of MT2712

 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
 drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
 drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
 include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
 include/dt-bindings/power/mt2712-power.h  |  3 ++
 5 files changed, 136 insertions(+), 18 deletions(-)

-- 
2.12.5

[PATCH v2 1/5] dt-bindings: soc: update MT2712 power dt-bindings

[Weiyi Lu]

Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
for MT2712 according to ECO design change.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/power/mt2712-power.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/power/mt2712-power.h b/include/dt-bindings/power/mt2712-power.h
index 92b46d772fae..2c147817efc2 100644
--- a/include/dt-bindings/power/mt2712-power.h
+++ b/include/dt-bindings/power/mt2712-power.h
@@ -22,5 +22,8 @@
 #define MT2712_POWER_DOMAIN_USB		5
 #define MT2712_POWER_DOMAIN_USB2	6
 #define MT2712_POWER_DOMAIN_MFG		7
+#define MT2712_POWER_DOMAIN_MFG_SC1	8
+#define MT2712_POWER_DOMAIN_MFG_SC2	9
+#define MT2712_POWER_DOMAIN_MFG_SC3	10
 
 #endif /* _DT_BINDINGS_POWER_MT2712_POWER_H */
-- 
2.12.5

[PATCH v2 1/5] dt-bindings: soc: update MT2712 power dt-bindings

[Weiyi Lu]

Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
for MT2712 according to ECO design change.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/power/mt2712-power.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/power/mt2712-power.h b/include/dt-bindings/power/mt2712-power.h
index 92b46d772fae..2c147817efc2 100644
--- a/include/dt-bindings/power/mt2712-power.h
+++ b/include/dt-bindings/power/mt2712-power.h
@@ -22,5 +22,8 @@
 #define MT2712_POWER_DOMAIN_USB		5
 #define MT2712_POWER_DOMAIN_USB2	6
 #define MT2712_POWER_DOMAIN_MFG		7
+#define MT2712_POWER_DOMAIN_MFG_SC1	8
+#define MT2712_POWER_DOMAIN_MFG_SC2	9
+#define MT2712_POWER_DOMAIN_MFG_SC3	10
 
 #endif /* _DT_BINDINGS_POWER_MT2712_POWER_H */
-- 
2.12.5

[PATCH v2 1/5] dt-bindings: soc: update MT2712 power dt-bindings

[Weiyi Lu]

Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
for MT2712 according to ECO design change.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/power/mt2712-power.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/power/mt2712-power.h b/include/dt-bindings/power/mt2712-power.h
index 92b46d772fae..2c147817efc2 100644
--- a/include/dt-bindings/power/mt2712-power.h
+++ b/include/dt-bindings/power/mt2712-power.h
@@ -22,5 +22,8 @@
 #define MT2712_POWER_DOMAIN_USB		5
 #define MT2712_POWER_DOMAIN_USB2	6
 #define MT2712_POWER_DOMAIN_MFG		7
+#define MT2712_POWER_DOMAIN_MFG_SC1	8
+#define MT2712_POWER_DOMAIN_MFG_SC2	9
+#define MT2712_POWER_DOMAIN_MFG_SC3	10
 
 #endif /* _DT_BINDINGS_POWER_MT2712_POWER_H */
-- 
2.12.5

[PATCH v2 2/5] soc: mediatek: update power domain data of MT2712

[Weiyi Lu]

1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
according to MT2712 ECO design change
2. add subdomain support for MT2712

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 42 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 59bd749c2f25..edf8fd6c2c85 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -664,12 +664,48 @@ static const struct scp_domain_data scp_domain_data_mt2712[] = {
 		.name = "mfg",
 		.sta_mask = PWR_STATUS_MFG,
 		.ctl_offs = SPM_MFG_PWR_CON,
-		.sram_pdn_bits = GENMASK(11, 8),
-		.sram_pdn_ack_bits = GENMASK(19, 16),
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
 		.clk_id = {CLK_MFG},
 		.bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
 		.active_wakeup = true,
 	},
+	[MT2712_POWER_DOMAIN_MFG_SC1] = {
+		.name = "mfg_sc1",
+		.sta_mask = BIT(22),
+		.ctl_offs = 0x02c0,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC2] = {
+		.name = "mfg_sc2",
+		.sta_mask = BIT(23),
+		.ctl_offs = 0x02c4,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC3] = {
+		.name = "mfg_sc3",
+		.sta_mask = BIT(30),
+		.ctl_offs = 0x01f8,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+};
+
+static const struct scp_subdomain scp_subdomain_mt2712[] = {
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VDEC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VENC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_ISP},
+	{MT2712_POWER_DOMAIN_MFG, MT2712_POWER_DOMAIN_MFG_SC1},
+	{MT2712_POWER_DOMAIN_MFG_SC1, MT2712_POWER_DOMAIN_MFG_SC2},
+	{MT2712_POWER_DOMAIN_MFG_SC2, MT2712_POWER_DOMAIN_MFG_SC3},
 };
 
 /*
@@ -905,6 +941,8 @@ static const struct scp_soc_data mt2701_data = {
 static const struct scp_soc_data mt2712_data = {
 	.domains = scp_domain_data_mt2712,
 	.num_domains = ARRAY_SIZE(scp_domain_data_mt2712),
+	.subdomains = scp_subdomain_mt2712,
+	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt2712),
 	.regs = {
 		.pwr_sta_offs = SPM_PWR_STATUS,
 		.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
-- 
2.12.5

[PATCH v2 2/5] soc: mediatek: update power domain data of MT2712

[Weiyi Lu]

1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
according to MT2712 ECO design change
2. add subdomain support for MT2712

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 42 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 59bd749c2f25..edf8fd6c2c85 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -664,12 +664,48 @@ static const struct scp_domain_data scp_domain_data_mt2712[] = {
 		.name = "mfg",
 		.sta_mask = PWR_STATUS_MFG,
 		.ctl_offs = SPM_MFG_PWR_CON,
-		.sram_pdn_bits = GENMASK(11, 8),
-		.sram_pdn_ack_bits = GENMASK(19, 16),
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
 		.clk_id = {CLK_MFG},
 		.bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
 		.active_wakeup = true,
 	},
+	[MT2712_POWER_DOMAIN_MFG_SC1] = {
+		.name = "mfg_sc1",
+		.sta_mask = BIT(22),
+		.ctl_offs = 0x02c0,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC2] = {
+		.name = "mfg_sc2",
+		.sta_mask = BIT(23),
+		.ctl_offs = 0x02c4,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC3] = {
+		.name = "mfg_sc3",
+		.sta_mask = BIT(30),
+		.ctl_offs = 0x01f8,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+};
+
+static const struct scp_subdomain scp_subdomain_mt2712[] = {
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VDEC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VENC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_ISP},
+	{MT2712_POWER_DOMAIN_MFG, MT2712_POWER_DOMAIN_MFG_SC1},
+	{MT2712_POWER_DOMAIN_MFG_SC1, MT2712_POWER_DOMAIN_MFG_SC2},
+	{MT2712_POWER_DOMAIN_MFG_SC2, MT2712_POWER_DOMAIN_MFG_SC3},
 };
 
 /*
@@ -905,6 +941,8 @@ static const struct scp_soc_data mt2701_data = {
 static const struct scp_soc_data mt2712_data = {
 	.domains = scp_domain_data_mt2712,
 	.num_domains = ARRAY_SIZE(scp_domain_data_mt2712),
+	.subdomains = scp_subdomain_mt2712,
+	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt2712),
 	.regs = {
 		.pwr_sta_offs = SPM_PWR_STATUS,
 		.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
-- 
2.12.5

[PATCH v2 2/5] soc: mediatek: update power domain data of MT2712

[Weiyi Lu]

1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
according to MT2712 ECO design change
2. add subdomain support for MT2712

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 42 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 59bd749c2f25..edf8fd6c2c85 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -664,12 +664,48 @@ static const struct scp_domain_data scp_domain_data_mt2712[] = {
 		.name = "mfg",
 		.sta_mask = PWR_STATUS_MFG,
 		.ctl_offs = SPM_MFG_PWR_CON,
-		.sram_pdn_bits = GENMASK(11, 8),
-		.sram_pdn_ack_bits = GENMASK(19, 16),
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
 		.clk_id = {CLK_MFG},
 		.bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
 		.active_wakeup = true,
 	},
+	[MT2712_POWER_DOMAIN_MFG_SC1] = {
+		.name = "mfg_sc1",
+		.sta_mask = BIT(22),
+		.ctl_offs = 0x02c0,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC2] = {
+		.name = "mfg_sc2",
+		.sta_mask = BIT(23),
+		.ctl_offs = 0x02c4,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+	[MT2712_POWER_DOMAIN_MFG_SC3] = {
+		.name = "mfg_sc3",
+		.sta_mask = BIT(30),
+		.ctl_offs = 0x01f8,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(16, 16),
+		.clk_id = {CLK_NONE},
+		.active_wakeup = true,
+	},
+};
+
+static const struct scp_subdomain scp_subdomain_mt2712[] = {
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VDEC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VENC},
+	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_ISP},
+	{MT2712_POWER_DOMAIN_MFG, MT2712_POWER_DOMAIN_MFG_SC1},
+	{MT2712_POWER_DOMAIN_MFG_SC1, MT2712_POWER_DOMAIN_MFG_SC2},
+	{MT2712_POWER_DOMAIN_MFG_SC2, MT2712_POWER_DOMAIN_MFG_SC3},
 };
 
 /*
@@ -905,6 +941,8 @@ static const struct scp_soc_data mt2701_data = {
 static const struct scp_soc_data mt2712_data = {
 	.domains = scp_domain_data_mt2712,
 	.num_domains = ARRAY_SIZE(scp_domain_data_mt2712),
+	.subdomains = scp_subdomain_mt2712,
+	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt2712),
 	.regs = {
 		.pwr_sta_offs = SPM_PWR_STATUS,
 		.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
-- 
2.12.5

[PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 include/dt-bindings/clock/mt2712-clk.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/dt-bindings/clock/mt2712-clk.h b/include/dt-bindings/clock/mt2712-clk.h
index 48a8e797a617..76265836a1e1 100644
--- a/include/dt-bindings/clock/mt2712-clk.h
+++ b/include/dt-bindings/clock/mt2712-clk.h
@@ -222,7 +222,13 @@
 #define CLK_TOP_APLL_DIV_PDN5		183
 #define CLK_TOP_APLL_DIV_PDN6		184
 #define CLK_TOP_APLL_DIV_PDN7		185
-#define CLK_TOP_NR_CLK			186
+#define CLK_TOP_APLL1_D3		186
+#define CLK_TOP_APLL1_REF_SEL		187
+#define CLK_TOP_APLL2_REF_SEL		188
+#define CLK_TOP_NFI2X_EN		189
+#define CLK_TOP_NFIECC_EN		190
+#define CLK_TOP_NFI1X_CK_EN		191
+#define CLK_TOP_NR_CLK			192
 
 /* INFRACFG */
 
@@ -281,7 +287,9 @@
 #define CLK_PERI_MSDC30_3_EN		41
 #define CLK_PERI_MSDC50_0_HCLK_EN	42
 #define CLK_PERI_MSDC50_3_HCLK_EN	43
-#define CLK_PERI_NR_CLK			44
+#define CLK_PERI_MSDC30_0_QTR_EN	44
+#define CLK_PERI_MSDC30_3_QTR_EN	45
+#define CLK_PERI_NR_CLK			46
 
 /* MCUCFG */
 
-- 
2.12.5

[PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 include/dt-bindings/clock/mt2712-clk.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/dt-bindings/clock/mt2712-clk.h b/include/dt-bindings/clock/mt2712-clk.h
index 48a8e797a617..76265836a1e1 100644
--- a/include/dt-bindings/clock/mt2712-clk.h
+++ b/include/dt-bindings/clock/mt2712-clk.h
@@ -222,7 +222,13 @@
 #define CLK_TOP_APLL_DIV_PDN5		183
 #define CLK_TOP_APLL_DIV_PDN6		184
 #define CLK_TOP_APLL_DIV_PDN7		185
-#define CLK_TOP_NR_CLK			186
+#define CLK_TOP_APLL1_D3		186
+#define CLK_TOP_APLL1_REF_SEL		187
+#define CLK_TOP_APLL2_REF_SEL		188
+#define CLK_TOP_NFI2X_EN		189
+#define CLK_TOP_NFIECC_EN		190
+#define CLK_TOP_NFI1X_CK_EN		191
+#define CLK_TOP_NR_CLK			192
 
 /* INFRACFG */
 
@@ -281,7 +287,9 @@
 #define CLK_PERI_MSDC30_3_EN		41
 #define CLK_PERI_MSDC50_0_HCLK_EN	42
 #define CLK_PERI_MSDC50_3_HCLK_EN	43
-#define CLK_PERI_NR_CLK			44
+#define CLK_PERI_MSDC30_0_QTR_EN	44
+#define CLK_PERI_MSDC30_3_QTR_EN	45
+#define CLK_PERI_NR_CLK			46
 
 /* MCUCFG */
 
-- 
2.12.5

[PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 include/dt-bindings/clock/mt2712-clk.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/dt-bindings/clock/mt2712-clk.h b/include/dt-bindings/clock/mt2712-clk.h
index 48a8e797a617..76265836a1e1 100644
--- a/include/dt-bindings/clock/mt2712-clk.h
+++ b/include/dt-bindings/clock/mt2712-clk.h
@@ -222,7 +222,13 @@
 #define CLK_TOP_APLL_DIV_PDN5		183
 #define CLK_TOP_APLL_DIV_PDN6		184
 #define CLK_TOP_APLL_DIV_PDN7		185
-#define CLK_TOP_NR_CLK			186
+#define CLK_TOP_APLL1_D3		186
+#define CLK_TOP_APLL1_REF_SEL		187
+#define CLK_TOP_APLL2_REF_SEL		188
+#define CLK_TOP_NFI2X_EN		189
+#define CLK_TOP_NFIECC_EN		190
+#define CLK_TOP_NFI1X_CK_EN		191
+#define CLK_TOP_NR_CLK			192
 
 /* INFRACFG */
 
@@ -281,7 +287,9 @@
 #define CLK_PERI_MSDC30_3_EN		41
 #define CLK_PERI_MSDC50_0_HCLK_EN	42
 #define CLK_PERI_MSDC50_3_HCLK_EN	43
-#define CLK_PERI_NR_CLK			44
+#define CLK_PERI_MSDC30_0_QTR_EN	44
+#define CLK_PERI_MSDC30_3_QTR_EN	45
+#define CLK_PERI_NR_CLK			46
 
 /* MCUCFG */
 
-- 
2.12.5

[PATCH v2 4/5] arm64: dts: add clock device nodes of MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index fdf66f4fe7c3..d7688bc9db1b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -199,6 +199,34 @@
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
+	clki2si0_mck_i: oscillator@6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si0_mck_i";
+	};
+
+	clki2si1_mck_i: oscillator@7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si1_mck_i";
+	};
+
+	clki2si2_mck_i: oscillator@8 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si2_mck_i";
+	};
+
+	clktdmin_mclk_i: oscillator@9 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clktdmin_mclk_i";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-- 
2.12.5

[PATCH v2 4/5] arm64: dts: add clock device nodes of MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index fdf66f4fe7c3..d7688bc9db1b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -199,6 +199,34 @@
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
+	clki2si0_mck_i: oscillator@6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si0_mck_i";
+	};
+
+	clki2si1_mck_i: oscillator@7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si1_mck_i";
+	};
+
+	clki2si2_mck_i: oscillator@8 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si2_mck_i";
+	};
+
+	clktdmin_mclk_i: oscillator@9 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clktdmin_mclk_i";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-- 
2.12.5

[PATCH v2 4/5] arm64: dts: add clock device nodes of MT2712

[Weiyi Lu]

add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index fdf66f4fe7c3..d7688bc9db1b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -199,6 +199,34 @@
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
+	clki2si0_mck_i: oscillator at 6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si0_mck_i";
+	};
+
+	clki2si1_mck_i: oscillator at 7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si1_mck_i";
+	};
+
+	clki2si2_mck_i: oscillator at 8 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si2_mck_i";
+	};
+
+	clktdmin_mclk_i: oscillator at 9 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clktdmin_mclk_i";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-- 
2.12.5

[PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Weiyi Lu]

According to ECO design change,
1. add new clock mux data and change some
2. add new clock gate data and clock factor data
3. change status register offset of infra subsystem

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/clk/mediatek/clk-mt2712.c | 69 +++++++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt2712.c b/drivers/clk/mediatek/clk-mt2712.c
index 498d13799388..991d4093726e 100644
--- a/drivers/clk/mediatek/clk-mt2712.c
+++ b/drivers/clk/mediatek/clk-mt2712.c
@@ -221,6 +221,8 @@ static const struct mtk_fixed_factor top_divs[] = {
 		4),
 	FACTOR(CLK_TOP_D2A_ULCLK_6P5M, "d2a_ulclk_6p5m", "clk26m", 1,
 		4),
+	FACTOR(CLK_TOP_APLL1_D3, "apll1_d3", "apll1_ck", 1,
+		3),
 };
 
 static const char * const axi_parents[] = {
@@ -625,7 +627,7 @@ static const char * const ether_125m_parents[] = {
 static const char * const ether_50m_parents[] = {
 	"clk26m",
 	"etherpll_50m",
-	"univpll_d26",
+	"apll1_d3",
 	"univpll3_d4"
 };
 
@@ -686,7 +688,7 @@ static const char * const i2c_parents[] = {
 
 static const char * const msdc0p_aes_parents[] = {
 	"clk26m",
-	"msdcpll_ck",
+	"syspll_d2",
 	"univpll_d3",
 	"vcodecpll_ck"
 };
@@ -719,6 +721,17 @@ static const char * const aud_apll2_parents[] = {
 	"clkaud_ext_i_2"
 };
 
+static const char * const apll1_ref_parents[] = {
+	"clkaud_ext_i_2",
+	"clkaud_ext_i_1",
+	"clki2si0_mck_i",
+	"clki2si1_mck_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i"
+};
+
 static const char * const audull_vtx_parents[] = {
 	"d2a_ulclk_6p5m",
 	"clkaud_ext_i_0"
@@ -886,6 +899,10 @@ static struct mtk_composite top_muxes[] = {
 		aud_apll2_parents, 0x134, 1, 1),
 	MUX(CLK_TOP_DA_AUDULL_VTX_6P5M_SEL, "audull_vtx_sel",
 		audull_vtx_parents, 0x134, 31, 1),
+	MUX(CLK_TOP_APLL1_REF_SEL, "apll1_ref_sel",
+		apll1_ref_parents, 0x134, 4, 3),
+	MUX(CLK_TOP_APLL2_REF_SEL, "apll2_ref_sel",
+		apll1_ref_parents, 0x134, 7, 3),
 };
 
 static const char * const mcu_mp0_parents[] = {
@@ -932,36 +949,56 @@ static const struct mtk_clk_divider top_adj_divs[] = {
 	DIV_ADJ(CLK_TOP_APLL_DIV7, "apll_div7", "i2si3_sel", 0x128, 24, 8),
 };
 
-static const struct mtk_gate_regs top_cg_regs = {
+static const struct mtk_gate_regs top0_cg_regs = {
 	.set_ofs = 0x120,
 	.clr_ofs = 0x120,
 	.sta_ofs = 0x120,
 };
 
-#define GATE_TOP(_id, _name, _parent, _shift) {	\
+static const struct mtk_gate_regs top1_cg_regs = {
+	.set_ofs = 0x424,
+	.clr_ofs = 0x424,
+	.sta_ofs = 0x424,
+};
+
+#define GATE_TOP0(_id, _name, _parent, _shift) {	\
 		.id = _id,				\
 		.name = _name,				\
 		.parent_name = _parent,			\
-		.regs = &top_cg_regs,			\
+		.regs = &top0_cg_regs,			\
 		.shift = _shift,			\
 		.ops = &mtk_clk_gate_ops_no_setclr,	\
 	}
 
+#define GATE_TOP1(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &top1_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
+	}
+
 static const struct mtk_gate top_clks[] = {
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP0 */
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP1 */
+	GATE_TOP1(CLK_TOP_NFI2X_EN, "nfi2x_en", "nfi2x_sel", 0),
+	GATE_TOP1(CLK_TOP_NFIECC_EN, "nfiecc_en", "nfiecc_sel", 1),
+	GATE_TOP1(CLK_TOP_NFI1X_CK_EN, "nfi1x_ck_en", "nfi2x_sel", 2),
 };
 
 static const struct mtk_gate_regs infra_cg_regs = {
 	.set_ofs = 0x40,
 	.clr_ofs = 0x44,
-	.sta_ofs = 0x40,
+	.sta_ofs = 0x48,
 };
 
 #define GATE_INFRA(_id, _name, _parent, _shift) {	\
@@ -1120,6 +1157,10 @@ static const struct mtk_gate peri_clks[] = {
 		"msdc50_0_h_sel", 4),
 	GATE_PERI2(CLK_PERI_MSDC50_3_HCLK_EN, "per_msdc50_3_h",
 		"msdc50_3_h_sel", 5),
+	GATE_PERI2(CLK_PERI_MSDC30_0_QTR_EN, "per_msdc30_0_q",
+		"axi_sel", 6),
+	GATE_PERI2(CLK_PERI_MSDC30_3_QTR_EN, "per_msdc30_3_q",
+		"mem_sel", 7),
 };
 
 #define MT2712_PLL_FMAX		(3000UL * MHZ)
-- 
2.12.5

[PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Weiyi Lu]

According to ECO design change,
1. add new clock mux data and change some
2. add new clock gate data and clock factor data
3. change status register offset of infra subsystem

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/clk/mediatek/clk-mt2712.c | 69 +++++++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt2712.c b/drivers/clk/mediatek/clk-mt2712.c
index 498d13799388..991d4093726e 100644
--- a/drivers/clk/mediatek/clk-mt2712.c
+++ b/drivers/clk/mediatek/clk-mt2712.c
@@ -221,6 +221,8 @@ static const struct mtk_fixed_factor top_divs[] = {
 		4),
 	FACTOR(CLK_TOP_D2A_ULCLK_6P5M, "d2a_ulclk_6p5m", "clk26m", 1,
 		4),
+	FACTOR(CLK_TOP_APLL1_D3, "apll1_d3", "apll1_ck", 1,
+		3),
 };
 
 static const char * const axi_parents[] = {
@@ -625,7 +627,7 @@ static const char * const ether_125m_parents[] = {
 static const char * const ether_50m_parents[] = {
 	"clk26m",
 	"etherpll_50m",
-	"univpll_d26",
+	"apll1_d3",
 	"univpll3_d4"
 };
 
@@ -686,7 +688,7 @@ static const char * const i2c_parents[] = {
 
 static const char * const msdc0p_aes_parents[] = {
 	"clk26m",
-	"msdcpll_ck",
+	"syspll_d2",
 	"univpll_d3",
 	"vcodecpll_ck"
 };
@@ -719,6 +721,17 @@ static const char * const aud_apll2_parents[] = {
 	"clkaud_ext_i_2"
 };
 
+static const char * const apll1_ref_parents[] = {
+	"clkaud_ext_i_2",
+	"clkaud_ext_i_1",
+	"clki2si0_mck_i",
+	"clki2si1_mck_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i"
+};
+
 static const char * const audull_vtx_parents[] = {
 	"d2a_ulclk_6p5m",
 	"clkaud_ext_i_0"
@@ -886,6 +899,10 @@ static struct mtk_composite top_muxes[] = {
 		aud_apll2_parents, 0x134, 1, 1),
 	MUX(CLK_TOP_DA_AUDULL_VTX_6P5M_SEL, "audull_vtx_sel",
 		audull_vtx_parents, 0x134, 31, 1),
+	MUX(CLK_TOP_APLL1_REF_SEL, "apll1_ref_sel",
+		apll1_ref_parents, 0x134, 4, 3),
+	MUX(CLK_TOP_APLL2_REF_SEL, "apll2_ref_sel",
+		apll1_ref_parents, 0x134, 7, 3),
 };
 
 static const char * const mcu_mp0_parents[] = {
@@ -932,36 +949,56 @@ static const struct mtk_clk_divider top_adj_divs[] = {
 	DIV_ADJ(CLK_TOP_APLL_DIV7, "apll_div7", "i2si3_sel", 0x128, 24, 8),
 };
 
-static const struct mtk_gate_regs top_cg_regs = {
+static const struct mtk_gate_regs top0_cg_regs = {
 	.set_ofs = 0x120,
 	.clr_ofs = 0x120,
 	.sta_ofs = 0x120,
 };
 
-#define GATE_TOP(_id, _name, _parent, _shift) {	\
+static const struct mtk_gate_regs top1_cg_regs = {
+	.set_ofs = 0x424,
+	.clr_ofs = 0x424,
+	.sta_ofs = 0x424,
+};
+
+#define GATE_TOP0(_id, _name, _parent, _shift) {	\
 		.id = _id,				\
 		.name = _name,				\
 		.parent_name = _parent,			\
-		.regs = &top_cg_regs,			\
+		.regs = &top0_cg_regs,			\
 		.shift = _shift,			\
 		.ops = &mtk_clk_gate_ops_no_setclr,	\
 	}
 
+#define GATE_TOP1(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &top1_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
+	}
+
 static const struct mtk_gate top_clks[] = {
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP0 */
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP1 */
+	GATE_TOP1(CLK_TOP_NFI2X_EN, "nfi2x_en", "nfi2x_sel", 0),
+	GATE_TOP1(CLK_TOP_NFIECC_EN, "nfiecc_en", "nfiecc_sel", 1),
+	GATE_TOP1(CLK_TOP_NFI1X_CK_EN, "nfi1x_ck_en", "nfi2x_sel", 2),
 };
 
 static const struct mtk_gate_regs infra_cg_regs = {
 	.set_ofs = 0x40,
 	.clr_ofs = 0x44,
-	.sta_ofs = 0x40,
+	.sta_ofs = 0x48,
 };
 
 #define GATE_INFRA(_id, _name, _parent, _shift) {	\
@@ -1120,6 +1157,10 @@ static const struct mtk_gate peri_clks[] = {
 		"msdc50_0_h_sel", 4),
 	GATE_PERI2(CLK_PERI_MSDC50_3_HCLK_EN, "per_msdc50_3_h",
 		"msdc50_3_h_sel", 5),
+	GATE_PERI2(CLK_PERI_MSDC30_0_QTR_EN, "per_msdc30_0_q",
+		"axi_sel", 6),
+	GATE_PERI2(CLK_PERI_MSDC30_3_QTR_EN, "per_msdc30_3_q",
+		"mem_sel", 7),
 };
 
 #define MT2712_PLL_FMAX		(3000UL * MHZ)
-- 
2.12.5

[PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Weiyi Lu]

According to ECO design change,
1. add new clock mux data and change some
2. add new clock gate data and clock factor data
3. change status register offset of infra subsystem

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/clk/mediatek/clk-mt2712.c | 69 +++++++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt2712.c b/drivers/clk/mediatek/clk-mt2712.c
index 498d13799388..991d4093726e 100644
--- a/drivers/clk/mediatek/clk-mt2712.c
+++ b/drivers/clk/mediatek/clk-mt2712.c
@@ -221,6 +221,8 @@ static const struct mtk_fixed_factor top_divs[] = {
 		4),
 	FACTOR(CLK_TOP_D2A_ULCLK_6P5M, "d2a_ulclk_6p5m", "clk26m", 1,
 		4),
+	FACTOR(CLK_TOP_APLL1_D3, "apll1_d3", "apll1_ck", 1,
+		3),
 };
 
 static const char * const axi_parents[] = {
@@ -625,7 +627,7 @@ static const char * const ether_125m_parents[] = {
 static const char * const ether_50m_parents[] = {
 	"clk26m",
 	"etherpll_50m",
-	"univpll_d26",
+	"apll1_d3",
 	"univpll3_d4"
 };
 
@@ -686,7 +688,7 @@ static const char * const i2c_parents[] = {
 
 static const char * const msdc0p_aes_parents[] = {
 	"clk26m",
-	"msdcpll_ck",
+	"syspll_d2",
 	"univpll_d3",
 	"vcodecpll_ck"
 };
@@ -719,6 +721,17 @@ static const char * const aud_apll2_parents[] = {
 	"clkaud_ext_i_2"
 };
 
+static const char * const apll1_ref_parents[] = {
+	"clkaud_ext_i_2",
+	"clkaud_ext_i_1",
+	"clki2si0_mck_i",
+	"clki2si1_mck_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i",
+	"clki2si2_mck_i",
+	"clktdmin_mclk_i"
+};
+
 static const char * const audull_vtx_parents[] = {
 	"d2a_ulclk_6p5m",
 	"clkaud_ext_i_0"
@@ -886,6 +899,10 @@ static struct mtk_composite top_muxes[] = {
 		aud_apll2_parents, 0x134, 1, 1),
 	MUX(CLK_TOP_DA_AUDULL_VTX_6P5M_SEL, "audull_vtx_sel",
 		audull_vtx_parents, 0x134, 31, 1),
+	MUX(CLK_TOP_APLL1_REF_SEL, "apll1_ref_sel",
+		apll1_ref_parents, 0x134, 4, 3),
+	MUX(CLK_TOP_APLL2_REF_SEL, "apll2_ref_sel",
+		apll1_ref_parents, 0x134, 7, 3),
 };
 
 static const char * const mcu_mp0_parents[] = {
@@ -932,36 +949,56 @@ static const struct mtk_clk_divider top_adj_divs[] = {
 	DIV_ADJ(CLK_TOP_APLL_DIV7, "apll_div7", "i2si3_sel", 0x128, 24, 8),
 };
 
-static const struct mtk_gate_regs top_cg_regs = {
+static const struct mtk_gate_regs top0_cg_regs = {
 	.set_ofs = 0x120,
 	.clr_ofs = 0x120,
 	.sta_ofs = 0x120,
 };
 
-#define GATE_TOP(_id, _name, _parent, _shift) {	\
+static const struct mtk_gate_regs top1_cg_regs = {
+	.set_ofs = 0x424,
+	.clr_ofs = 0x424,
+	.sta_ofs = 0x424,
+};
+
+#define GATE_TOP0(_id, _name, _parent, _shift) {	\
 		.id = _id,				\
 		.name = _name,				\
 		.parent_name = _parent,			\
-		.regs = &top_cg_regs,			\
+		.regs = &top0_cg_regs,			\
 		.shift = _shift,			\
 		.ops = &mtk_clk_gate_ops_no_setclr,	\
 	}
 
+#define GATE_TOP1(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &top1_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
+	}
+
 static const struct mtk_gate top_clks[] = {
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
-	GATE_TOP(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP0 */
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN0, "apll_div_pdn0", "i2so1_sel", 0),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN1, "apll_div_pdn1", "i2so2_sel", 1),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN2, "apll_div_pdn2", "i2so3_sel", 2),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN3, "apll_div_pdn3", "tdmo0_sel", 3),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN4, "apll_div_pdn4", "tdmo1_sel", 4),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN5, "apll_div_pdn5", "i2si1_sel", 5),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN6, "apll_div_pdn6", "i2si2_sel", 6),
+	GATE_TOP0(CLK_TOP_APLL_DIV_PDN7, "apll_div_pdn7", "i2si3_sel", 7),
+	/* TOP1 */
+	GATE_TOP1(CLK_TOP_NFI2X_EN, "nfi2x_en", "nfi2x_sel", 0),
+	GATE_TOP1(CLK_TOP_NFIECC_EN, "nfiecc_en", "nfiecc_sel", 1),
+	GATE_TOP1(CLK_TOP_NFI1X_CK_EN, "nfi1x_ck_en", "nfi2x_sel", 2),
 };
 
 static const struct mtk_gate_regs infra_cg_regs = {
 	.set_ofs = 0x40,
 	.clr_ofs = 0x44,
-	.sta_ofs = 0x40,
+	.sta_ofs = 0x48,
 };
 
 #define GATE_INFRA(_id, _name, _parent, _shift) {	\
@@ -1120,6 +1157,10 @@ static const struct mtk_gate peri_clks[] = {
 		"msdc50_0_h_sel", 4),
 	GATE_PERI2(CLK_PERI_MSDC50_3_HCLK_EN, "per_msdc50_3_h",
 		"msdc50_3_h_sel", 5),
+	GATE_PERI2(CLK_PERI_MSDC30_0_QTR_EN, "per_msdc30_0_q",
+		"axi_sel", 6),
+	GATE_PERI2(CLK_PERI_MSDC30_3_QTR_EN, "per_msdc30_3_q",
+		"mem_sel", 7),
 };
 
 #define MT2712_PLL_FMAX		(3000UL * MHZ)
-- 
2.12.5

Re: [PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Rob Herring]

On Mon, Mar 12, 2018 at 03:03:40PM +0800, Weiyi Lu wrote:
> add new clocks according to ECO design change
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  include/dt-bindings/clock/mt2712-clk.h | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Rob Herring]

On Mon, Mar 12, 2018 at 03:03:40PM +0800, Weiyi Lu wrote:
> add new clocks according to ECO design change
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  include/dt-bindings/clock/mt2712-clk.h | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 1/5] dt-bindings: soc: update MT2712 power dt-bindings

[Matthias Brugger]

On 03/12/2018 08:03 AM, Weiyi Lu wrote:
> Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
> for MT2712 according to ECO design change.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Pushed to v4.16-next/soc

Thanks!

> ---
>  include/dt-bindings/power/mt2712-power.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/include/dt-bindings/power/mt2712-power.h b/include/dt-bindings/power/mt2712-power.h
> index 92b46d772fae..2c147817efc2 100644
> --- a/include/dt-bindings/power/mt2712-power.h
> +++ b/include/dt-bindings/power/mt2712-power.h
> @@ -22,5 +22,8 @@
>  #define MT2712_POWER_DOMAIN_USB		5
>  #define MT2712_POWER_DOMAIN_USB2	6
>  #define MT2712_POWER_DOMAIN_MFG		7
> +#define MT2712_POWER_DOMAIN_MFG_SC1	8
> +#define MT2712_POWER_DOMAIN_MFG_SC2	9
> +#define MT2712_POWER_DOMAIN_MFG_SC3	10
>  
>  #endif /* _DT_BINDINGS_POWER_MT2712_POWER_H */
> 

[PATCH v2 1/5] dt-bindings: soc: update MT2712 power dt-bindings

[Matthias Brugger]

On 03/12/2018 08:03 AM, Weiyi Lu wrote:
> Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
> for MT2712 according to ECO design change.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Pushed to v4.16-next/soc

Thanks!

> ---
>  include/dt-bindings/power/mt2712-power.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/include/dt-bindings/power/mt2712-power.h b/include/dt-bindings/power/mt2712-power.h
> index 92b46d772fae..2c147817efc2 100644
> --- a/include/dt-bindings/power/mt2712-power.h
> +++ b/include/dt-bindings/power/mt2712-power.h
> @@ -22,5 +22,8 @@
>  #define MT2712_POWER_DOMAIN_USB		5
>  #define MT2712_POWER_DOMAIN_USB2	6
>  #define MT2712_POWER_DOMAIN_MFG		7
> +#define MT2712_POWER_DOMAIN_MFG_SC1	8
> +#define MT2712_POWER_DOMAIN_MFG_SC2	9
> +#define MT2712_POWER_DOMAIN_MFG_SC3	10
>  
>  #endif /* _DT_BINDINGS_POWER_MT2712_POWER_H */
> 

Re: [PATCH v2 2/5] soc: mediatek: update power domain data of MT2712

[Matthias Brugger]

On 03/12/2018 08:03 AM, Weiyi Lu wrote:
> 1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
> according to MT2712 ECO design change
> 2. add subdomain support for MT2712
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>

Pushed to v4.16-next/soc

Thanks!

> ---
>  drivers/soc/mediatek/mtk-scpsys.c | 42 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index 59bd749c2f25..edf8fd6c2c85 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -664,12 +664,48 @@ static const struct scp_domain_data scp_domain_data_mt2712[] = {
>  		.name = "mfg",
>  		.sta_mask = PWR_STATUS_MFG,
>  		.ctl_offs = SPM_MFG_PWR_CON,
> -		.sram_pdn_bits = GENMASK(11, 8),
> -		.sram_pdn_ack_bits = GENMASK(19, 16),
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
>  		.clk_id = {CLK_MFG},
>  		.bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
>  		.active_wakeup = true,
>  	},
> +	[MT2712_POWER_DOMAIN_MFG_SC1] = {
> +		.name = "mfg_sc1",
> +		.sta_mask = BIT(22),
> +		.ctl_offs = 0x02c0,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +	[MT2712_POWER_DOMAIN_MFG_SC2] = {
> +		.name = "mfg_sc2",
> +		.sta_mask = BIT(23),
> +		.ctl_offs = 0x02c4,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +	[MT2712_POWER_DOMAIN_MFG_SC3] = {
> +		.name = "mfg_sc3",
> +		.sta_mask = BIT(30),
> +		.ctl_offs = 0x01f8,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +};
> +
> +static const struct scp_subdomain scp_subdomain_mt2712[] = {
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VDEC},
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VENC},
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_ISP},
> +	{MT2712_POWER_DOMAIN_MFG, MT2712_POWER_DOMAIN_MFG_SC1},
> +	{MT2712_POWER_DOMAIN_MFG_SC1, MT2712_POWER_DOMAIN_MFG_SC2},
> +	{MT2712_POWER_DOMAIN_MFG_SC2, MT2712_POWER_DOMAIN_MFG_SC3},
>  };
>  
>  /*
> @@ -905,6 +941,8 @@ static const struct scp_soc_data mt2701_data = {
>  static const struct scp_soc_data mt2712_data = {
>  	.domains = scp_domain_data_mt2712,
>  	.num_domains = ARRAY_SIZE(scp_domain_data_mt2712),
> +	.subdomains = scp_subdomain_mt2712,
> +	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt2712),
>  	.regs = {
>  		.pwr_sta_offs = SPM_PWR_STATUS,
>  		.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> 

[PATCH v2 2/5] soc: mediatek: update power domain data of MT2712

[Matthias Brugger]

On 03/12/2018 08:03 AM, Weiyi Lu wrote:
> 1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
> according to MT2712 ECO design change
> 2. add subdomain support for MT2712
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>

Pushed to v4.16-next/soc

Thanks!

> ---
>  drivers/soc/mediatek/mtk-scpsys.c | 42 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index 59bd749c2f25..edf8fd6c2c85 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -664,12 +664,48 @@ static const struct scp_domain_data scp_domain_data_mt2712[] = {
>  		.name = "mfg",
>  		.sta_mask = PWR_STATUS_MFG,
>  		.ctl_offs = SPM_MFG_PWR_CON,
> -		.sram_pdn_bits = GENMASK(11, 8),
> -		.sram_pdn_ack_bits = GENMASK(19, 16),
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
>  		.clk_id = {CLK_MFG},
>  		.bus_prot_mask = BIT(14) | BIT(21) | BIT(23),
>  		.active_wakeup = true,
>  	},
> +	[MT2712_POWER_DOMAIN_MFG_SC1] = {
> +		.name = "mfg_sc1",
> +		.sta_mask = BIT(22),
> +		.ctl_offs = 0x02c0,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +	[MT2712_POWER_DOMAIN_MFG_SC2] = {
> +		.name = "mfg_sc2",
> +		.sta_mask = BIT(23),
> +		.ctl_offs = 0x02c4,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +	[MT2712_POWER_DOMAIN_MFG_SC3] = {
> +		.name = "mfg_sc3",
> +		.sta_mask = BIT(30),
> +		.ctl_offs = 0x01f8,
> +		.sram_pdn_bits = GENMASK(8, 8),
> +		.sram_pdn_ack_bits = GENMASK(16, 16),
> +		.clk_id = {CLK_NONE},
> +		.active_wakeup = true,
> +	},
> +};
> +
> +static const struct scp_subdomain scp_subdomain_mt2712[] = {
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VDEC},
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_VENC},
> +	{MT2712_POWER_DOMAIN_MM, MT2712_POWER_DOMAIN_ISP},
> +	{MT2712_POWER_DOMAIN_MFG, MT2712_POWER_DOMAIN_MFG_SC1},
> +	{MT2712_POWER_DOMAIN_MFG_SC1, MT2712_POWER_DOMAIN_MFG_SC2},
> +	{MT2712_POWER_DOMAIN_MFG_SC2, MT2712_POWER_DOMAIN_MFG_SC3},
>  };
>  
>  /*
> @@ -905,6 +941,8 @@ static const struct scp_soc_data mt2701_data = {
>  static const struct scp_soc_data mt2712_data = {
>  	.domains = scp_domain_data_mt2712,
>  	.num_domains = ARRAY_SIZE(scp_domain_data_mt2712),
> +	.subdomains = scp_subdomain_mt2712,
> +	.num_subdomains = ARRAY_SIZE(scp_subdomain_mt2712),
>  	.regs = {
>  		.pwr_sta_offs = SPM_PWR_STATUS,
>  		.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND
> 

Re: [PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:40)
> add new clocks according to ECO design change
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:40)
> add new clocks according to ECO design change
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:40)
> add new clocks according to ECO design change
> =

> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 3/5] dt-bindings: clock: add clocks for MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:40)
> add new clocks according to ECO design change
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:42)
> According to ECO design change,
> 1. add new clock mux data and change some
> 2. add new clock gate data and clock factor data
> 3. change status register offset of infra subsystem
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:42)
> According to ECO design change,
> 1. add new clock mux data and change some
> 2. add new clock gate data and clock factor data
> 3. change status register offset of infra subsystem
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:42)
> According to ECO design change,
> 1. add new clock mux data and change some
> 2. add new clock gate data and clock factor data
> 3. change status register offset of infra subsystem
> =

> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

[PATCH v2 5/5] clk: mediatek: update clock driver of MT2712

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-12 00:03:42)
> According to ECO design change,
> 1. add new clock mux data and change some
> 2. add new clock gate data and clock factor data
> 3. change status register offset of infra subsystem
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---

Applied to clk-next

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
> Basically, all changes are for the ECO design change of MT2712.
> 
> changes since v1:
> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
> 
Hi Matthias & Stephen,

Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
dts: add clock device nodes of MT2712). Does there any problem remain or
it cause some problems? Many thanks.
> Weiyi Lu (5):
>   dt-bindings: soc: update MT2712 power dt-bindings
>   soc: mediatek: update power domain data of MT2712
>   dt-bindings: clock: add clocks for MT2712
>   arm64: dts: add clock device nodes of MT2712
>   clk: mediatek: update clock driver of MT2712
> 
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
>  drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
>  drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
>  include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
>  include/dt-bindings/power/mt2712-power.h  |  3 ++
>  5 files changed, 136 insertions(+), 18 deletions(-)
> 

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
> Basically, all changes are for the ECO design change of MT2712.
> 
> changes since v1:
> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
> 
Hi Matthias & Stephen,

Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
dts: add clock device nodes of MT2712). Does there any problem remain or
it cause some problems? Many thanks.
> Weiyi Lu (5):
>   dt-bindings: soc: update MT2712 power dt-bindings
>   soc: mediatek: update power domain data of MT2712
>   dt-bindings: clock: add clocks for MT2712
>   arm64: dts: add clock device nodes of MT2712
>   clk: mediatek: update clock driver of MT2712
> 
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
>  drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
>  drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
>  include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
>  include/dt-bindings/power/mt2712-power.h  |  3 ++
>  5 files changed, 136 insertions(+), 18 deletions(-)
> 

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Weiyi Lu]

On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
> Basically, all changes are for the ECO design change of MT2712.
> 
> changes since v1:
> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
> 
Hi Matthias & Stephen,

Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
dts: add clock device nodes of MT2712). Does there any problem remain or
it cause some problems? Many thanks.
> Weiyi Lu (5):
>   dt-bindings: soc: update MT2712 power dt-bindings
>   soc: mediatek: update power domain data of MT2712
>   dt-bindings: clock: add clocks for MT2712
>   arm64: dts: add clock device nodes of MT2712
>   clk: mediatek: update clock driver of MT2712
> 
>  arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 +++++++++++++
>  drivers/clk/mediatek/clk-mt2712.c         | 69 ++++++++++++++++++++++++-------
>  drivers/soc/mediatek/mtk-scpsys.c         | 42 ++++++++++++++++++-
>  include/dt-bindings/clock/mt2712-clk.h    | 12 +++++-
>  include/dt-bindings/power/mt2712-power.h  |  3 ++
>  5 files changed, 136 insertions(+), 18 deletions(-)
> 

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-19 23:07:48)
> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> > This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
> > Basically, all changes are for the ECO design change of MT2712.
> > 
> > changes since v1:
> > - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
> > 
> Hi Matthias & Stephen,
> 
> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
> dts: add clock device nodes of MT2712). Does there any problem remain or
> it cause some problems? Many thanks.

Patch 4 can go via arm-soc? I'm not planning to apply that patch.

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-19 23:07:48)
> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> > This series is based on v4.16-rc1 and composed of scpsys control (PATCH=
 1-2) and clock control (PATCH 3-5).
> > Basically, all changes are for the ECO design change of MT2712.
> > =

> > changes since v1:
> > - Avoid renumbering clocks. Append new clocks at the bottom of each own=
 subsystem.
> > =

> Hi Matthias & Stephen,
> =

> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
> dts: add clock device nodes of MT2712). Does there any problem remain or
> it cause some problems? Many thanks.

Patch 4 can go via arm-soc? I'm not planning to apply that patch.

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Stephen Boyd]

Quoting Weiyi Lu (2018-03-19 23:07:48)
> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
> > This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
> > Basically, all changes are for the ECO design change of MT2712.
> > 
> > changes since v1:
> > - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
> > 
> Hi Matthias & Stephen,
> 
> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
> dts: add clock device nodes of MT2712). Does there any problem remain or
> it cause some problems? Many thanks.

Patch 4 can go via arm-soc? I'm not planning to apply that patch.

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Matthias Brugger]

On 03/20/2018 08:23 AM, Stephen Boyd wrote:
> Quoting Weiyi Lu (2018-03-19 23:07:48)
>> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
>>> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
>>> Basically, all changes are for the ECO design change of MT2712.
>>>
>>> changes since v1:
>>> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
>>>
>> Hi Matthias & Stephen,
>>
>> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
>> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
>> dts: add clock device nodes of MT2712). Does there any problem remain or
>> it cause some problems? Many thanks.
> 
> Patch 4 can go via arm-soc? I'm not planning to apply that patch.
> 

I can take it through my branch, no problem. But I think it is too late for this
cycle. CCing Arnd to confirm.

Regards,
Matthias

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Matthias Brugger]

On 03/20/2018 08:23 AM, Stephen Boyd wrote:
> Quoting Weiyi Lu (2018-03-19 23:07:48)
>> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
>>> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
>>> Basically, all changes are for the ECO design change of MT2712.
>>>
>>> changes since v1:
>>> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
>>>
>> Hi Matthias & Stephen,
>>
>> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
>> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
>> dts: add clock device nodes of MT2712). Does there any problem remain or
>> it cause some problems? Many thanks.
> 
> Patch 4 can go via arm-soc? I'm not planning to apply that patch.
> 

I can take it through my branch, no problem. But I think it is too late for this
cycle. CCing Arnd to confirm.

Regards,
Matthias

Re: [PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Matthias Brugger]

On 03/21/2018 10:11 AM, Matthias Brugger wrote:
> 
> 
> On 03/20/2018 08:23 AM, Stephen Boyd wrote:
>> Quoting Weiyi Lu (2018-03-19 23:07:48)
>>> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
>>>> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
>>>> Basically, all changes are for the ECO design change of MT2712.
>>>>
>>>> changes since v1:
>>>> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
>>>>
>>> Hi Matthias & Stephen,
>>>
>>> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
>>> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
>>> dts: add clock device nodes of MT2712). Does there any problem remain or
>>> it cause some problems? Many thanks.
>>
>> Patch 4 can go via arm-soc? I'm not planning to apply that patch.
>>
> 
> I can take it through my branch, no problem. But I think it is too late for this
> cycle. CCing Arnd to confirm.
> 

Now pushed to v4.17-next/dts64

Thanks a lot.

[PATCH v2 0/5] update Mediatek MT2712 clock and scpsys support

[Matthias Brugger]

On 03/21/2018 10:11 AM, Matthias Brugger wrote:
> 
> 
> On 03/20/2018 08:23 AM, Stephen Boyd wrote:
>> Quoting Weiyi Lu (2018-03-19 23:07:48)
>>> On Mon, 2018-03-12 at 15:03 +0800, Weiyi Lu wrote:
>>>> This series is based on v4.16-rc1 and composed of scpsys control (PATCH 1-2) and clock control (PATCH 3-5).
>>>> Basically, all changes are for the ECO design change of MT2712.
>>>>
>>>> changes since v1:
>>>> - Avoid renumbering clocks. Append new clocks at the bottom of each own subsystem.
>>>>
>>> Hi Matthias & Stephen,
>>>
>>> Sorry to bother. Just saw patch 1/2 are already pushed to v4.16-next-soc
>>> and patch 3/5 are applied onto clk-next. What about the patch 4(arm64:
>>> dts: add clock device nodes of MT2712). Does there any problem remain or
>>> it cause some problems? Many thanks.
>>
>> Patch 4 can go via arm-soc? I'm not planning to apply that patch.
>>
> 
> I can take it through my branch, no problem. But I think it is too late for this
> cycle. CCing Arnd to confirm.
> 

Now pushed to v4.17-next/dts64

Thanks a lot.