From: Sricharan R <sricharan@codeaurora.org> To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, andy.gross@linaro.org, david.brown@linaro.org, catalin.marinas@arm.com, will.deacon@arm.com, sboyd@codeaurora.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, absahu@codeaurora.org, marc.zyngier@arm.com, richardcochran@gmail.com Cc: sricharan@codeaurora.org Subject: [PATCH v5 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Date: Fri, 23 Mar 2018 15:48:52 +0530 [thread overview] Message-ID: <1521800336-19266-10-git-send-email-sricharan@codeaurora.org> (raw) In-Reply-To: <1521800336-19266-1-git-send-email-sricharan@codeaurora.org> Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cf083c9..ae7f214 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c3.dtb \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts new file mode 100644 index 0000000..dab052c --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; + + soc { + pci@40000000 { + status = "ok"; + perst-gpio = <&tlmm 38 0x1>; + }; + + spi@78b6000 { /* BLSP1 QUP2 */ + status = "ok"; + }; + + pinctrl@1000000 { + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi@78b5000 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 12 0>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + spi-max-frequency = <24000000>; + }; + }; + }; +}; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Date: Fri, 23 Mar 2018 15:48:52 +0530 [thread overview] Message-ID: <1521800336-19266-10-git-send-email-sricharan@codeaurora.org> (raw) In-Reply-To: <1521800336-19266-1-git-send-email-sricharan@codeaurora.org> Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cf083c9..ae7f214 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c3.dtb \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts new file mode 100644 index 0000000..dab052c --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; + + soc { + pci at 40000000 { + status = "ok"; + perst-gpio = <&tlmm 38 0x1>; + }; + + spi at 78b6000 { /* BLSP1 QUP2 */ + status = "ok"; + }; + + pinctrl at 1000000 { + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + }; + + serial at 78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi at 78b5000 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 12 0>; + + m25p80 at 0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + spi-max-frequency = <24000000>; + }; + }; + }; +}; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-03-23 10:18 UTC|newest] Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-03-23 10:18 [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 16:56 ` Bjorn Andersson 2018-03-27 16:56 ` Bjorn Andersson 2018-03-23 10:18 ` [PATCH v5 02/13] ARM: dts: ipq4019: Add a default chosen node Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 16:56 ` Bjorn Andersson 2018-03-27 16:56 ` Bjorn Andersson 2018-03-27 16:56 ` Bjorn Andersson 2018-03-23 10:18 ` [PATCH v5 03/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 16:50 ` Bjorn Andersson 2018-03-27 16:50 ` Bjorn Andersson 2018-04-02 5:27 ` Sricharan R 2018-04-02 5:27 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 04/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:04 ` Bjorn Andersson 2018-03-27 17:04 ` Bjorn Andersson 2018-04-02 5:28 ` Sricharan R 2018-04-02 5:28 ` Sricharan R 2018-04-18 6:59 ` [v5,05/13] " Sven Eckelmann 2018-04-18 6:59 ` Sven Eckelmann 2018-04-18 7:07 ` Sven Eckelmann 2018-04-18 7:07 ` Sven Eckelmann 2018-04-18 7:15 ` Sricharan R 2018-04-18 7:15 ` Sricharan R 2018-04-18 7:38 ` Sven Eckelmann 2018-04-18 7:38 ` Sven Eckelmann 2018-04-18 8:39 ` Sricharan R 2018-04-18 8:39 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:12 ` Bjorn Andersson 2018-03-27 17:12 ` Bjorn Andersson 2018-04-02 5:34 ` Sricharan R 2018-04-02 5:34 ` Sricharan R 2018-04-02 6:30 ` Varadarajan Narayanan 2018-04-02 6:30 ` Varadarajan Narayanan 2018-03-23 10:18 ` [PATCH v5 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:14 ` Bjorn Andersson 2018-03-27 17:14 ` Bjorn Andersson 2018-04-02 6:07 ` Sricharan R 2018-04-02 6:07 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:20 ` Bjorn Andersson 2018-03-27 17:20 ` Bjorn Andersson 2018-04-02 6:09 ` Sricharan R 2018-04-02 6:09 ` Sricharan R 2018-04-18 6:59 ` [v5,08/13] " Sven Eckelmann 2018-04-18 6:59 ` Sven Eckelmann 2018-04-18 7:12 ` Sricharan R 2018-04-18 7:12 ` Sricharan R 2018-03-23 10:18 ` Sricharan R [this message] 2018-03-23 10:18 ` [PATCH v5 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R 2018-03-27 17:22 ` Bjorn Andersson 2018-03-27 17:22 ` Bjorn Andersson 2018-04-02 6:10 ` Sricharan R 2018-04-02 6:10 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:29 ` Bjorn Andersson 2018-03-27 17:29 ` Bjorn Andersson 2018-04-02 6:12 ` Sricharan R 2018-04-02 6:12 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:45 ` Bjorn Andersson 2018-03-27 17:45 ` Bjorn Andersson 2018-04-02 6:34 ` Sricharan R 2018-04-02 6:34 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:46 ` Bjorn Andersson 2018-03-27 17:46 ` Bjorn Andersson 2018-04-02 6:35 ` Sricharan R 2018-04-02 6:35 ` Sricharan R 2018-03-23 10:18 ` [PATCH v5 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R 2018-03-23 10:18 ` Sricharan R 2018-03-27 17:49 ` Bjorn Andersson 2018-03-27 17:49 ` Bjorn Andersson 2018-04-02 6:36 ` Sricharan R 2018-04-02 6:36 ` Sricharan R 2018-03-24 2:17 ` [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Richard Cochran 2018-03-24 2:17 ` Richard Cochran 2018-03-24 2:17 ` Richard Cochran 2018-03-24 6:12 ` sricharan 2018-03-24 6:12 ` sricharan at codeaurora.org 2018-03-24 17:16 ` Richard Cochran 2018-03-24 17:16 ` Richard Cochran
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1521800336-19266-10-git-send-email-sricharan@codeaurora.org \ --to=sricharan@codeaurora.org \ --cc=absahu@codeaurora.org \ --cc=andy.gross@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=david.brown@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-soc@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=marc.zyngier@arm.com \ --cc=mark.rutland@arm.com \ --cc=richardcochran@gmail.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=sboyd@codeaurora.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.