From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com> Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>, Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>, Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>, bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/9] ARM: bcm283x: RPi 3 B+ support and other improvements Date: Fri, 13 Apr 2018 19:27:49 +0200 [thread overview] Message-ID: <1523640478-4448-1-git-send-email-stefan.wahren@i2se.com> (raw) The main focus of the patch series is to provide support for the new Raspberry Pi 3 B+ . The rest are parts which missed the merge window for 4.17. Since there are still some issues with LAN78XX, also apply Phil Elwell's patches [1] and Dave Stevenson's patches [2] before testing. But they are not required for the function of this series. Relevant to all RPis : Patch #1, #6 Relevant to RPi 3 B : Patch #2, #7, #8 Relevant to RPi 3 B+ : Patch #3, #4, #5, #7, #8, #9 [1] - https://marc.info/?l=linux-netdev&m=152354143824973&w=2 [2] - https://github.com/raspberrypi/linux/pull/2502 Stefan Wahren (9): ARM: dts: bcm283x: Fix PWM pin assignment ARM: dts: bcm2837: Add missing GPIOs of Expander dt-bindings: bcm: Add Raspberry Pi 3 B+ ARM: dts: bcm2837: Add Raspberry Pi 3 B+ ARM: bcm2835_defconfig: Enable LAN78XX driver ARM: bcm2835_defconfig: Enable VCHIQ driver ARM: multi_v7_defconfig: Enable LAN and BT support for RPi 3 B+ arm64: defconfig: Enable LAN and BT support for RPi 3 B+ arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+ .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 -- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 ++ arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 108 +++++++++++++++++++++ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 26 ++++- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 27 ++++++ arch/arm/configs/bcm2835_defconfig | 2 + arch/arm/configs/multi_v7_defconfig | 4 + arch/arm64/boot/dts/broadcom/Makefile | 3 +- .../boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 + arch/arm64/configs/defconfig | 2 + 17 files changed, 213 insertions(+), 8 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: stefan.wahren@i2se.com (Stefan Wahren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/9] ARM: bcm283x: RPi 3 B+ support and other improvements Date: Fri, 13 Apr 2018 19:27:49 +0200 [thread overview] Message-ID: <1523640478-4448-1-git-send-email-stefan.wahren@i2se.com> (raw) The main focus of the patch series is to provide support for the new Raspberry Pi 3 B+ . The rest are parts which missed the merge window for 4.17. Since there are still some issues with LAN78XX, also apply Phil Elwell's patches [1] and Dave Stevenson's patches [2] before testing. But they are not required for the function of this series. Relevant to all RPis : Patch #1, #6 Relevant to RPi 3 B : Patch #2, #7, #8 Relevant to RPi 3 B+ : Patch #3, #4, #5, #7, #8, #9 [1] - https://marc.info/?l=linux-netdev&m=152354143824973&w=2 [2] - https://github.com/raspberrypi/linux/pull/2502 Stefan Wahren (9): ARM: dts: bcm283x: Fix PWM pin assignment ARM: dts: bcm2837: Add missing GPIOs of Expander dt-bindings: bcm: Add Raspberry Pi 3 B+ ARM: dts: bcm2837: Add Raspberry Pi 3 B+ ARM: bcm2835_defconfig: Enable LAN78XX driver ARM: bcm2835_defconfig: Enable VCHIQ driver ARM: multi_v7_defconfig: Enable LAN and BT support for RPi 3 B+ arm64: defconfig: Enable LAN and BT support for RPi 3 B+ arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+ .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 ++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 -- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 ++ arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 108 +++++++++++++++++++++ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 26 ++++- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 27 ++++++ arch/arm/configs/bcm2835_defconfig | 2 + arch/arm/configs/multi_v7_defconfig | 4 + arch/arm64/boot/dts/broadcom/Makefile | 3 +- .../boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 + arch/arm64/configs/defconfig | 2 + 17 files changed, 213 insertions(+), 8 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts -- 2.7.4
next reply other threads:[~2018-04-13 17:27 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-13 17:27 Stefan Wahren [this message] 2018-04-13 17:27 ` [PATCH 0/9] ARM: bcm283x: RPi 3 B+ support and other improvements Stefan Wahren 2018-04-13 17:27 ` [PATCH 1/9] ARM: dts: bcm283x: Fix PWM pin assignment Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 2/9] ARM: dts: bcm2837: Add missing GPIOs of Expander Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 3/9] dt-bindings: bcm: Add Raspberry Pi 3 B+ Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-16 20:38 ` Rob Herring 2018-04-16 20:38 ` Rob Herring 2018-04-13 17:27 ` [PATCH 4/9] ARM: dts: bcm2837: " Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-16 20:43 ` Rob Herring 2018-04-16 20:43 ` Rob Herring 2018-04-17 8:13 ` Stefan Wahren 2018-04-17 8:13 ` Stefan Wahren 2018-04-17 16:02 ` Eric Anholt 2018-04-17 16:02 ` Eric Anholt 2018-04-20 11:24 ` Stefan Wahren 2018-04-20 11:24 ` Stefan Wahren 2018-04-20 18:50 ` Rob Herring 2018-04-20 18:50 ` Rob Herring 2018-04-13 17:27 ` [PATCH 5/9] ARM: bcm2835_defconfig: Enable LAN78XX driver Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 6/9] ARM: bcm2835_defconfig: Enable VCHIQ driver Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 7/9] ARM: multi_v7_defconfig: Enable LAN and BT support for RPi 3 B+ Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 8/9] arm64: defconfig: " Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-13 17:27 ` [PATCH 9/9] arm64: dts: broadcom: Add reference to Raspberry Pi " Stefan Wahren 2018-04-13 17:27 ` Stefan Wahren 2018-04-20 11:26 ` Stefan Wahren 2018-04-20 11:26 ` Stefan Wahren 2018-04-13 20:01 ` [PATCH 0/9] ARM: bcm283x: RPi 3 B+ support and other improvements Eric Anholt 2018-04-13 20:01 ` Eric Anholt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1523640478-4448-1-git-send-email-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=agraf@suse.de \ --cc=arnd@arndb.de \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=eric@anholt.net \ --cc=f.fainelli@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=phil@raspberrypi.org \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.