From: Neil Armstrong <narmstrong@baylibre.com> To: maxime.ripard@bootlin.com, wens@csie.org Cc: Neil Armstrong <narmstrong@baylibre.com>, clabbe@baylibre.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver. Date: Tue, 24 Apr 2018 13:47:14 +0200 [thread overview] Message-ID: <1524570434-17814-3-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1524570434-17814-1-git-send-email-narmstrong@baylibre.com> The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H2+, H3, or H5 SoCs with the same PCB. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. This patch enables the H5 variant using the H3 board definition moved to a common dtsi in an earlier patch. The dts sinmply include the common dtsi and declares the correct compatible and model of the H5 variant. Suggested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts | 14 ++++++++++++++ 2 files changed, 15 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8bebe7d..7e07c07 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 0000000..95e113c --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-cc.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 2/2] arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver. Date: Tue, 24 Apr 2018 13:47:14 +0200 [thread overview] Message-ID: <1524570434-17814-3-git-send-email-narmstrong@baylibre.com> (raw) In-Reply-To: <1524570434-17814-1-git-send-email-narmstrong@baylibre.com> The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H2+, H3, or H5 SoCs with the same PCB. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. This patch enables the H5 variant using the H3 board definition moved to a common dtsi in an earlier patch. The dts sinmply include the common dtsi and declares the correct compatible and model of the H5 variant. Suggested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts | 14 ++++++++++++++ 2 files changed, 15 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8bebe7d..7e07c07 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 0000000..95e113c --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-cc.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; -- 2.7.4
next prev parent reply other threads:[~2018-04-24 11:47 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-24 11:47 [PATCH v2 0/2] arm64: allwinner: Add support for Libre Computer Board ALL-H3-CC H5 ver Neil Armstrong 2018-04-24 11:47 ` Neil Armstrong 2018-04-24 11:47 ` [PATCH v2 1/2] arm: dts: sun8i: h3: libretech-all-h3-cc: Move board definition to common dtsi Neil Armstrong 2018-04-24 11:47 ` Neil Armstrong 2018-04-24 12:14 ` Maxime Ripard 2018-04-24 12:14 ` Maxime Ripard 2018-04-24 11:47 ` Neil Armstrong [this message] 2018-04-24 11:47 ` [PATCH v2 2/2] arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver Neil Armstrong 2018-04-24 12:14 ` Maxime Ripard 2018-04-24 12:14 ` Maxime Ripard 2018-04-24 12:24 ` Chen-Yu Tsai 2018-04-24 12:24 ` Chen-Yu Tsai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1524570434-17814-3-git-send-email-narmstrong@baylibre.com \ --to=narmstrong@baylibre.com \ --cc=clabbe@baylibre.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maxime.ripard@bootlin.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.