All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
	mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
	lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
	david.brown@linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, rjw@rjwysocki.net,
	linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	rnayak@codeaurora.org, ilialin@codeaurora.org,
	amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
	celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v7 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs
Date: Tue, 15 May 2018 12:13:33 +0300	[thread overview]
Message-ID: <1526375616-16904-12-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526375616-16904-1-git-send-email-ilialin@codeaurora.org>

1. Add syscon node for the SAW CPU registers
2. Add SAW regulators gang definition for s8-s11
3. Add voltages to the OPP tables
4. Add the s11 SAW regulator as CPU regulator

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 75 +++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e6cf290..d7adef9 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -99,6 +100,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -114,6 +116,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -125,6 +128,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
@@ -140,6 +144,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
@@ -174,66 +179,82 @@
 
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -244,102 +265,127 @@
 
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -656,6 +702,10 @@
 			#mbox-cells = <1>;
 		};
 
+		saw3: syscon@9A10000 {
+			compatible = "syscon";
+			reg = <0x9A10000 0x1000>;
+		};
 		gcc: clock-controller@300000 {
 			compatible = "qcom,gcc-msm8996";
 			#clock-cells = <1>;
@@ -882,6 +932,31 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
+			pmic@1 {
+				compatible = "qcom,pm8994", "qcom,spmi-pmic";
+				reg = <0x1 SPMI_USID>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spm-regulators {
+					compatible = "qcom,pm8994-regulators";
+					qcom,saw-reg = <&saw3>;
+					s8 {
+						qcom,saw-slave;
+					};
+					s9 {
+						qcom,saw-slave;
+					};
+					s10 {
+						qcom,saw-slave;
+					};
+					pm8994_s11_saw: s11 {
+						qcom,saw-leader;
+						regulator-always-on;
+						regulator-min-microvolt = <905000>;
+						regulator-max-microvolt = <1140000>;
+					};
+				};
+			};
 		};
 
 		mmcc: clock-controller@8c0000 {
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs
Date: Tue, 15 May 2018 12:13:33 +0300	[thread overview]
Message-ID: <1526375616-16904-12-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526375616-16904-1-git-send-email-ilialin@codeaurora.org>

1. Add syscon node for the SAW CPU registers
2. Add SAW regulators gang definition for s8-s11
3. Add voltages to the OPP tables
4. Add the s11 SAW regulator as CPU regulator

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 75 +++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e6cf290..d7adef9 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -99,6 +100,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -114,6 +116,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -125,6 +128,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
@@ -140,6 +144,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
 			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
@@ -174,66 +179,82 @@
 
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-422400000 {
 			opp-hz = /bits/ 64 <422400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-844800000 {
 			opp-hz = /bits/ 64 <844800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-960000000 {
 			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1228800000 {
 			opp-hz = /bits/ 64 <1228800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1593600000 {
 			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -244,102 +265,127 @@
 
 		opp-307200000 {
 			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-403200000 {
 			opp-hz = /bits/ 64 <403200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-556800000 {
 			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-652800000 {
 			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-729600000 {
 			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-806400000 {
 			opp-hz = /bits/ 64 <806400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-883200000 {
 			opp-hz = /bits/ 64 <883200000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-940800000 {
 			opp-hz = /bits/ 64 <940800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1036800000 {
 			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1113600000 {
 			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1190400000 {
 			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <905000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1324800000 {
 			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1478400000 {
 			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1555200000 {
 			opp-hz = /bits/ 64 <1555200000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1632000000 {
 			opp-hz = /bits/ 64 <1632000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1708800000 {
 			opp-hz = /bits/ 64 <1708800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1785600000 {
 			opp-hz = /bits/ 64 <1785600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1824000000 {
 			opp-hz = /bits/ 64 <1824000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1920000000 {
 			opp-hz = /bits/ 64 <1920000000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-1996800000 {
 			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2073600000 {
 			opp-hz = /bits/ 64 <2073600000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 		opp-2150400000 {
 			opp-hz = /bits/ 64 <2150400000>;
+			opp-microvolt = <1140000 905000 1140000>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -656,6 +702,10 @@
 			#mbox-cells = <1>;
 		};
 
+		saw3: syscon at 9A10000 {
+			compatible = "syscon";
+			reg = <0x9A10000 0x1000>;
+		};
 		gcc: clock-controller at 300000 {
 			compatible = "qcom,gcc-msm8996";
 			#clock-cells = <1>;
@@ -882,6 +932,31 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
+			pmic at 1 {
+				compatible = "qcom,pm8994", "qcom,spmi-pmic";
+				reg = <0x1 SPMI_USID>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				spm-regulators {
+					compatible = "qcom,pm8994-regulators";
+					qcom,saw-reg = <&saw3>;
+					s8 {
+						qcom,saw-slave;
+					};
+					s9 {
+						qcom,saw-slave;
+					};
+					s10 {
+						qcom,saw-slave;
+					};
+					pm8994_s11_saw: s11 {
+						qcom,saw-leader;
+						regulator-always-on;
+						regulator-min-microvolt = <905000>;
+						regulator-max-microvolt = <1140000>;
+					};
+				};
+			};
 		};
 
 		mmcc: clock-controller at 8c0000 {
-- 
1.9.1

  parent reply	other threads:[~2018-05-15  9:13 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15  9:13 [PATCH v7 00/14] CPU scaling support for msm8996 Ilia Lin
2018-05-15  9:13 ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-15  9:13 ` [PATCH v7 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 03/14] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-17 16:31   ` kbuild test robot
2018-05-17 16:31     ` kbuild test robot
2018-05-17 16:31     ` kbuild test robot
2018-05-17 16:51   ` kbuild test robot
2018-05-17 16:51     ` kbuild test robot
2018-05-17 16:51     ` kbuild test robot
2018-05-15  9:13 ` [PATCH v7 04/14] clk: qcom: Add DT bindings for " Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 08/14] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 09/14] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:13 ` [PATCH v7 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-17  7:24     ` ilialin
2018-05-17  7:24       ` ilialin at codeaurora.org
2018-05-17  7:24       ` ilialin
2018-05-17  7:24       ` ilialin
2018-05-15  9:13 ` Ilia Lin [this message]
2018-05-15  9:13   ` [PATCH v7 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-05-15  9:13 ` [PATCH v7 12/14] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:19   ` Viresh Kumar
2018-05-15  9:19     ` Viresh Kumar
2018-05-15  9:28     ` Rafael J. Wysocki
2018-05-15  9:28       ` Rafael J. Wysocki
2018-05-16  4:13   ` kbuild test robot
2018-05-16  4:13     ` kbuild test robot
2018-05-16  4:13     ` kbuild test robot
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-16 14:11     ` Viresh Kumar
2018-05-16 14:11       ` Viresh Kumar
2018-05-16 14:13       ` Amit Kucheria
2018-05-16 14:13         ` Amit Kucheria
2018-05-16 14:13         ` Amit Kucheria
2018-05-17  7:50       ` ilialin
2018-05-17  7:50         ` ilialin at codeaurora.org
2018-05-17  7:50         ` ilialin
2018-05-17  8:20       ` ilialin
2018-05-17  8:20         ` ilialin at codeaurora.org
2018-05-17  8:20         ` ilialin
2018-05-16 15:45     ` Ilia Lin
2018-05-16 15:45       ` Ilia Lin
2018-05-17  7:19     ` ilialin
2018-05-17  7:19       ` ilialin at codeaurora.org
2018-05-17  7:19       ` ilialin
2018-05-17  7:19       ` ilialin
2018-05-15  9:13 ` [PATCH v7 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-15  9:13 ` [PATCH v7 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-15  9:13   ` Ilia Lin
2018-05-15  9:19   ` Viresh Kumar
2018-05-15  9:19     ` Viresh Kumar
2018-05-16 13:12   ` Amit Kucheria
2018-05-16 13:12     ` Amit Kucheria
2018-05-16 13:11 ` [PATCH v7 00/14] CPU scaling support for msm8996 Amit Kucheria
2018-05-16 13:11   ` Amit Kucheria

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526375616-16904-12-git-send-email-ilialin@codeaurora.org \
    --to=ilialin@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=celster@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=rnayak@codeaurora.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tfinkel@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.