All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mimi Zohar <zohar@linux.vnet.ibm.com>
To: linux-integrity@vger.kernel.org
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org, David Howells <dhowells@redhat.com>,
	"Luis R . Rodriguez" <mcgrof@kernel.org>,
	Eric Biederman <ebiederm@xmission.com>,
	kexec@lists.infradead.org, Andres Rodriguez <andresx7@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH v2 0/9] kexec/firmware: support system wide policy requiring signatures
Date: Thu, 17 May 2018 10:48:41 -0400	[thread overview]
Message-ID: <1526568530-9144-1-git-send-email-zohar@linux.vnet.ibm.com> (raw)

IMA-appraisal is mostly being used in the embedded or single purpose
closed system environments.  In these environments, both the Kconfig
options and the userspace tools can be modified appropriately to limit
syscalls.  For stock kernels, userspace applications need to continue to
work with older kernels as well as with newer kernels.

In this environment, the customer needs the ability to define a system
wide IMA policy, such as requiring all kexec'ed images, firmware, kernel
modules to be signed, without being dependent on either the Kconfig
options or the userspace tools.[1]

This patch set allows the customer to define a policy which requires
the kexec'ed kernel images, firmware, and/or kernel modules to be
signed.

New to this patch set is the ability to configure a build time IMA policy,
which is automatically loaded at run time without needing to specify it
on the boot command line.  The build time policy rules persist after
loading a custom kernel policy.

[1] kexec-tools suupports the new syscall based on a flag (-s).

Changelog v3:
- combined "kexec: limit kexec_load syscall" and "firmware: kernel
signature verification" patch sets.
- add support for build time policy.
- defined generic security_kernel_read_blob() wrapper for
  security_kernel_read_file(). Suggested by Luis.
- removed the CONFIG_CFG80211_REQUIRE_SIGNED_REGDB ifdef.  If both REGDB
  and an IMA-appraisal policy require signed firmware, for now require
  both signatures.  Subsequent patches might change this.
- Still unclear if the pre-allocated firmware buffer can be accessed
  prior to the signature verification completes.

Mimi Zohar (9):
  ima: based on policy verify firmware signatures (pre-allocated buffer)
  ima: fix updating the ima_appraise flag
  security: define security_kernel_read_blob() wrapper
  kexec: add call to LSM hook in original kexec_load syscall
  ima: based on policy require signed kexec kernel images
  firmware: add call to LSM hook before firmware sysfs fallback
  ima: based on policy require signed firmware (sysfs fallback)
  ima: add build time policy
  ima: based on policy prevent loading firmware (pre-allocated buffer)

 drivers/base/firmware_loader/fallback.c |  7 +++
 include/linux/fs.h                      |  1 +
 include/linux/security.h                |  6 +++
 kernel/kexec.c                          | 11 +++++
 security/integrity/ima/Kconfig          | 58 +++++++++++++++++++++++++
 security/integrity/ima/ima.h            |  1 +
 security/integrity/ima/ima_main.c       | 29 +++++++++++++
 security/integrity/ima/ima_policy.c     | 76 +++++++++++++++++++++++++++------
 security/security.c                     |  6 +++
 9 files changed, 183 insertions(+), 12 deletions(-)

-- 
2.7.5

WARNING: multiple messages have this Message-ID (diff)
From: zohar@linux.vnet.ibm.com (Mimi Zohar)
To: linux-security-module@vger.kernel.org
Subject: [PATCH v2 0/9] kexec/firmware: support system wide policy requiring signatures
Date: Thu, 17 May 2018 10:48:41 -0400	[thread overview]
Message-ID: <1526568530-9144-1-git-send-email-zohar@linux.vnet.ibm.com> (raw)

IMA-appraisal is mostly being used in the embedded or single purpose
closed system environments.  In these environments, both the Kconfig
options and the userspace tools can be modified appropriately to limit
syscalls.  For stock kernels, userspace applications need to continue to
work with older kernels as well as with newer kernels.

In this environment, the customer needs the ability to define a system
wide IMA policy, such as requiring all kexec'ed images, firmware, kernel
modules to be signed, without being dependent on either the Kconfig
options or the userspace tools.[1]

This patch set allows the customer to define a policy which requires
the kexec'ed kernel images, firmware, and/or kernel modules to be
signed.

New to this patch set is the ability to configure a build time IMA policy,
which is automatically loaded at run time without needing to specify it
on the boot command line.  The build time policy rules persist after
loading a custom kernel policy.

[1] kexec-tools suupports the new syscall based on a flag (-s).

Changelog v3:
- combined "kexec: limit kexec_load syscall" and "firmware: kernel
signature verification" patch sets.
- add support for build time policy.
- defined generic security_kernel_read_blob() wrapper for
  security_kernel_read_file(). Suggested by Luis.
- removed the CONFIG_CFG80211_REQUIRE_SIGNED_REGDB ifdef.  If both REGDB
  and an IMA-appraisal policy require signed firmware, for now require
  both signatures.  Subsequent patches might change this.
- Still unclear if the pre-allocated firmware buffer can be accessed
  prior to the signature verification completes.

Mimi Zohar (9):
  ima: based on policy verify firmware signatures (pre-allocated buffer)
  ima: fix updating the ima_appraise flag
  security: define security_kernel_read_blob() wrapper
  kexec: add call to LSM hook in original kexec_load syscall
  ima: based on policy require signed kexec kernel images
  firmware: add call to LSM hook before firmware sysfs fallback
  ima: based on policy require signed firmware (sysfs fallback)
  ima: add build time policy
  ima: based on policy prevent loading firmware (pre-allocated buffer)

 drivers/base/firmware_loader/fallback.c |  7 +++
 include/linux/fs.h                      |  1 +
 include/linux/security.h                |  6 +++
 kernel/kexec.c                          | 11 +++++
 security/integrity/ima/Kconfig          | 58 +++++++++++++++++++++++++
 security/integrity/ima/ima.h            |  1 +
 security/integrity/ima/ima_main.c       | 29 +++++++++++++
 security/integrity/ima/ima_policy.c     | 76 +++++++++++++++++++++++++++------
 security/security.c                     |  6 +++
 9 files changed, 183 insertions(+), 12 deletions(-)

-- 
2.7.5

--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Mimi Zohar <zohar@linux.vnet.ibm.com>
To: linux-integrity@vger.kernel.org
Cc: Andres Rodriguez <andresx7@gmail.com>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	kexec@lists.infradead.org, linux-kernel@vger.kernel.org,
	David Howells <dhowells@redhat.com>,
	linux-security-module@vger.kernel.org,
	Eric Biederman <ebiederm@xmission.com>,
	Mimi Zohar <zohar@linux.vnet.ibm.com>,
	"Luis R . Rodriguez" <mcgrof@kernel.org>
Subject: [PATCH v2 0/9] kexec/firmware: support system wide policy requiring signatures
Date: Thu, 17 May 2018 10:48:41 -0400	[thread overview]
Message-ID: <1526568530-9144-1-git-send-email-zohar@linux.vnet.ibm.com> (raw)

IMA-appraisal is mostly being used in the embedded or single purpose
closed system environments.  In these environments, both the Kconfig
options and the userspace tools can be modified appropriately to limit
syscalls.  For stock kernels, userspace applications need to continue to
work with older kernels as well as with newer kernels.

In this environment, the customer needs the ability to define a system
wide IMA policy, such as requiring all kexec'ed images, firmware, kernel
modules to be signed, without being dependent on either the Kconfig
options or the userspace tools.[1]

This patch set allows the customer to define a policy which requires
the kexec'ed kernel images, firmware, and/or kernel modules to be
signed.

New to this patch set is the ability to configure a build time IMA policy,
which is automatically loaded at run time without needing to specify it
on the boot command line.  The build time policy rules persist after
loading a custom kernel policy.

[1] kexec-tools suupports the new syscall based on a flag (-s).

Changelog v3:
- combined "kexec: limit kexec_load syscall" and "firmware: kernel
signature verification" patch sets.
- add support for build time policy.
- defined generic security_kernel_read_blob() wrapper for
  security_kernel_read_file(). Suggested by Luis.
- removed the CONFIG_CFG80211_REQUIRE_SIGNED_REGDB ifdef.  If both REGDB
  and an IMA-appraisal policy require signed firmware, for now require
  both signatures.  Subsequent patches might change this.
- Still unclear if the pre-allocated firmware buffer can be accessed
  prior to the signature verification completes.

Mimi Zohar (9):
  ima: based on policy verify firmware signatures (pre-allocated buffer)
  ima: fix updating the ima_appraise flag
  security: define security_kernel_read_blob() wrapper
  kexec: add call to LSM hook in original kexec_load syscall
  ima: based on policy require signed kexec kernel images
  firmware: add call to LSM hook before firmware sysfs fallback
  ima: based on policy require signed firmware (sysfs fallback)
  ima: add build time policy
  ima: based on policy prevent loading firmware (pre-allocated buffer)

 drivers/base/firmware_loader/fallback.c |  7 +++
 include/linux/fs.h                      |  1 +
 include/linux/security.h                |  6 +++
 kernel/kexec.c                          | 11 +++++
 security/integrity/ima/Kconfig          | 58 +++++++++++++++++++++++++
 security/integrity/ima/ima.h            |  1 +
 security/integrity/ima/ima_main.c       | 29 +++++++++++++
 security/integrity/ima/ima_policy.c     | 76 +++++++++++++++++++++++++++------
 security/security.c                     |  6 +++
 9 files changed, 183 insertions(+), 12 deletions(-)

-- 
2.7.5


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

             reply	other threads:[~2018-05-17 14:48 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17 14:48 Mimi Zohar [this message]
2018-05-17 14:48 ` [PATCH v2 0/9] kexec/firmware: support system wide policy requiring signatures Mimi Zohar
2018-05-17 14:48 ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 1/9] ima: based on policy verify firmware signatures (pre-allocated buffer) Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 2/9] ima: fix updating the ima_appraise flag Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 3/9] security: define security_kernel_read_blob() wrapper Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-18  0:24   ` Casey Schaufler
2018-05-18  0:24     ` Casey Schaufler
2018-05-18  0:24     ` Casey Schaufler
2018-05-18  3:37     ` Eric W. Biederman
2018-05-18  3:37       ` Eric W. Biederman
2018-05-18  3:37       ` Eric W. Biederman
2018-05-18  3:37       ` Eric W. Biederman
2018-05-18 11:30       ` Mimi Zohar
2018-05-18 11:30         ` Mimi Zohar
2018-05-18 11:30         ` Mimi Zohar
2018-05-18 11:30         ` Mimi Zohar
2018-05-18 14:58         ` Casey Schaufler
2018-05-18 14:58           ` Casey Schaufler
2018-05-18 14:58           ` Casey Schaufler
2018-05-18 14:58           ` Casey Schaufler
2018-05-18 15:29           ` Mimi Zohar
2018-05-18 15:29             ` Mimi Zohar
2018-05-18 15:29             ` Mimi Zohar
2018-05-18 17:13       ` James Morris
2018-05-18 17:13         ` James Morris
2018-05-18 17:13         ` James Morris
2018-05-18 17:55         ` Mimi Zohar
2018-05-18 17:55           ` Mimi Zohar
2018-05-18 17:55           ` Mimi Zohar
2018-05-18 17:55           ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 4/9] kexec: add call to LSM hook in original kexec_load syscall Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 5/9] ima: based on policy require signed kexec kernel images Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 6/9] firmware: add call to LSM hook before firmware sysfs fallback Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 7/9] ima: based on policy require signed firmware (sysfs fallback) Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 8/9] ima: add build time policy Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48 ` [PATCH v2 9/9] ima: based on policy prevent loading firmware (pre-allocated buffer) Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar
2018-05-17 14:48   ` Mimi Zohar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526568530-9144-1-git-send-email-zohar@linux.vnet.ibm.com \
    --to=zohar@linux.vnet.ibm.com \
    --cc=andresx7@gmail.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=dhowells@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kexec@lists.infradead.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.