[v2 PATCH 0/5] powerpc/pseries: Machien check handler improvements.

[v2 PATCH 0/5] powerpc/pseries: Machien check handler improvements.

[Mahesh J Salgaonkar]

This patch series includes some improvement to Machine check handler
for pseries. Patch 1 fixes an issue where machine check handler crashes
kernel while accessing vmalloc-ed buffer while in nmi context.
Patch 3 dumps the SLB contents on SLB MCE errors to improve the debugability.
Patch 4 display's the MCE error details on console.

Change in V2:
- patch 4: Display additional info (NIP and task info) in MCE error details.
- patch 5: Fix endain bug while restoring of r3 in MCE handler.

---

Mahesh Salgaonkar (5):
      powerpc/pseries: convert rtas_log_buf to linear allocation.
      powerpc/pseries: Define MCE error event section.
      powerpc/pseries: Dump and flush SLB contents on SLB MCE errors.
      powerpc/pseries: Display machine check error details.
      powerpc/pseries: Fix endainness while restoring of r3 in MCE handler.


 arch/powerpc/include/asm/book3s/64/mmu-hash.h |    1 
 arch/powerpc/include/asm/rtas.h               |  109 ++++++++++++++++++
 arch/powerpc/kernel/rtasd.c                   |    2 
 arch/powerpc/mm/slb.c                         |   35 ++++++
 arch/powerpc/platforms/pseries/ras.c          |  155 +++++++++++++++++++++++++
 5 files changed, 299 insertions(+), 3 deletions(-)

--
Signature

[v2 PATCH 1/5] powerpc/pseries: convert rtas_log_buf to linear allocation.

[Mahesh J Salgaonkar]

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

rtas_log_buf is a buffer to hold RTAS event data that are communicated
to kernel by hypervisor. This buffer is then used to pass RTAS event
data to user through proc fs. This buffer is allocated from vmalloc
(non-linear mapping) area.

On Machine check interrupt, register r3 points to RTAS extended event
log passed by hypervisor that contains the MCE event. The pseries
machine check handler then logs this error into rtas_log_buf. The
rtas_log_buf is a vmalloc-ed (non-linear) buffer we end up taking up a
page fault (vector 0x300) while accessing it. Since machine check
interrupt handler runs in NMI context we can not afford to take any
page fault. Page faults are not honored in NMI context and causes
kernel panic. This patch fixes this issue by allocating rtas_log_buf
using kmalloc.

Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/rtasd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index f915db93cd42..3957d4ae2ba2 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -559,7 +559,7 @@ static int __init rtas_event_scan_init(void)
 	rtas_error_log_max = rtas_get_error_log_max();
 	rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
 
-	rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
+	rtas_log_buf = kmalloc(rtas_error_log_buffer_max*LOG_NUMBER, GFP_KERNEL);
 	if (!rtas_log_buf) {
 		printk(KERN_ERR "rtasd: no memory\n");
 		return -ENOMEM;

[v2 PATCH 2/5] powerpc/pseries: Define MCE error event section.

[Mahesh J Salgaonkar]

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

On pseries, the machine check error details are part of RTAS extended
event log passed under Machine check exception section. This patch adds
the definition of rtas MCE event section and related helper
functions.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/rtas.h |  104 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index ec9dd79398ee..3f2fba7ef23b 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -275,6 +275,7 @@ inline uint32_t rtas_ext_event_company_id(struct rtas_ext_event_log_v6 *ext_log)
 #define PSERIES_ELOG_SECT_ID_CALL_HOME		(('C' << 8) | 'H')
 #define PSERIES_ELOG_SECT_ID_USER_DEF		(('U' << 8) | 'D')
 #define PSERIES_ELOG_SECT_ID_HOTPLUG		(('H' << 8) | 'P')
+#define PSERIES_ELOG_SECT_ID_MCE		(('M' << 8) | 'C')
 
 /* Vendor specific Platform Event Log Format, Version 6, section header */
 struct pseries_errorlog {
@@ -326,6 +327,109 @@ struct pseries_hp_errorlog {
 #define PSERIES_HP_ELOG_ID_DRC_COUNT	3
 #define PSERIES_HP_ELOG_ID_DRC_IC	4
 
+/* RTAS pseries MCE errorlog section */
+#pragma pack(push, 1)
+struct pseries_mc_errorlog {
+	__be32	fru_id;
+	__be32	proc_id;
+	uint8_t	error_type;
+	union {
+		struct {
+			uint8_t	ue_err_type;
+			/* XXXXXXXX
+			 * X		1: Permanent or Transient UE.
+			 *  X		1: Effective address provided.
+			 *   X		1: Logical address provided.
+			 *    XX	2: Reserved.
+			 *      XXX	3: Type of UE error.
+			 */
+			uint8_t	reserved_1[6];
+			__be64	effective_address;
+			__be64	logical_address;
+		} ue_error;
+		struct {
+			uint8_t	soft_err_type;
+			/* XXXXXXXX
+			 * X		1: Effective address provided.
+			 *  XXXXX	5: Reserved.
+			 *       XX	2: Type of SLB/ERAT/TLB error.
+			 */
+			uint8_t	reserved_1[6];
+			__be64	effective_address;
+			uint8_t	reserved_2[8];
+		} soft_error;
+	} u;
+};
+#pragma pack(pop)
+
+/* RTAS pseries MCE error types */
+#define PSERIES_MC_ERROR_TYPE_UE		0x00
+#define PSERIES_MC_ERROR_TYPE_SLB		0x01
+#define PSERIES_MC_ERROR_TYPE_ERAT		0x02
+#define PSERIES_MC_ERROR_TYPE_TLB		0x04
+#define PSERIES_MC_ERROR_TYPE_D_CACHE		0x05
+#define PSERIES_MC_ERROR_TYPE_I_CACHE		0x07
+
+/* RTAS pseries MCE error sub types */
+#define PSERIES_MC_ERROR_UE_INDETERMINATE		0
+#define PSERIES_MC_ERROR_UE_IFETCH			1
+#define PSERIES_MC_ERROR_UE_PAGE_TABLE_WALK_IFETCH	2
+#define PSERIES_MC_ERROR_UE_LOAD_STORE			3
+#define PSERIES_MC_ERROR_UE_PAGE_TABLE_WALK_LOAD_STORE	4
+
+#define PSERIES_MC_ERROR_SLB_PARITY		0
+#define PSERIES_MC_ERROR_SLB_MULTIHIT		1
+#define PSERIES_MC_ERROR_SLB_INDETERMINATE	2
+
+#define PSERIES_MC_ERROR_ERAT_PARITY		1
+#define PSERIES_MC_ERROR_ERAT_MULTIHIT		2
+#define PSERIES_MC_ERROR_ERAT_INDETERMINATE	3
+
+#define PSERIES_MC_ERROR_TLB_PARITY		1
+#define PSERIES_MC_ERROR_TLB_MULTIHIT		2
+#define PSERIES_MC_ERROR_TLB_INDETERMINATE	3
+
+static inline uint8_t rtas_mc_error_type(const struct pseries_mc_errorlog *mlog)
+{
+	return mlog->error_type;
+}
+
+static inline uint8_t rtas_mc_error_sub_type(
+					const struct pseries_mc_errorlog *mlog)
+{
+	switch (mlog->error_type) {
+	case	PSERIES_MC_ERROR_TYPE_UE:
+		return (mlog->u.ue_error.ue_err_type & 0x07);
+	case	PSERIES_MC_ERROR_TYPE_SLB:
+	case	PSERIES_MC_ERROR_TYPE_ERAT:
+	case	PSERIES_MC_ERROR_TYPE_TLB:
+		return (mlog->u.soft_error.soft_err_type & 0x03);
+	default:
+		return 0;
+	}
+}
+
+static inline uint64_t rtas_mc_get_effective_addr(
+					const struct pseries_mc_errorlog *mlog)
+{
+	uint64_t addr = 0;
+
+	switch (mlog->error_type) {
+	case	PSERIES_MC_ERROR_TYPE_UE:
+		if (mlog->u.ue_error.ue_err_type & 0x40)
+			addr = mlog->u.ue_error.effective_address;
+		break;
+	case	PSERIES_MC_ERROR_TYPE_SLB:
+	case	PSERIES_MC_ERROR_TYPE_ERAT:
+	case	PSERIES_MC_ERROR_TYPE_TLB:
+		if (mlog->u.soft_error.soft_err_type & 0x80)
+			addr = mlog->u.soft_error.effective_address;
+	default:
+		break;
+	}
+	return be64_to_cpu(addr);
+}
+
 struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
 					      uint16_t section_id);
 

[v2 PATCH 3/5] powerpc/pseries: Dump and flush SLB contents on SLB MCE errors.

[Mahesh J Salgaonkar]

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

If we get a machine check exceptions due to SLB errors then dump the
current SLB contents which will be very much helpful in debugging the
root cause of SLB errors. On pseries, as of today system crashes on SLB
errors. These are soft errors and can be fixed by flushing the SLBs so
the kernel can continue to function instead of system crash. This patch
fixes that also.

With this patch the console will log SLB contents like below on SLB MCE
errors:

[  822.711728] slb contents:
[  822.711730] 00 c000000008000000 400ea1b217000500
[  822.711731]   1T  ESID=   c00000  VSID=      ea1b217 LLP:100
[  822.711732] 01 d000000008000000 400d43642f000510
[  822.711733]   1T  ESID=   d00000  VSID=      d43642f LLP:110
[  822.711734] 09 f000000008000000 400a86c85f000500
[  822.711736]   1T  ESID=   f00000  VSID=      a86c85f LLP:100
[  822.711737] 10 00007f0008000000 400d1f26e3000d90
[  822.711738]   1T  ESID=       7f  VSID=      d1f26e3 LLP:110
[  822.711739] 11 0000000018000000 000e3615f520fd90
[  822.711740]  256M ESID=        1  VSID=   e3615f520f LLP:110
[  822.711740] 12 d000000008000000 400d43642f000510
[  822.711741]   1T  ESID=   d00000  VSID=      d43642f LLP:110
[  822.711742] 13 d000000008000000 400d43642f000510
[  822.711743]   1T  ESID=   d00000  VSID=      d43642f LLP:110


Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |    1 +
 arch/powerpc/mm/slb.c                         |   35 +++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/ras.c          |   29 ++++++++++++++++++++-
 3 files changed, 64 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 50ed64fba4ae..c0da68927235 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -487,6 +487,7 @@ extern void hpte_init_native(void);
 
 extern void slb_initialize(void);
 extern void slb_flush_and_rebolt(void);
+extern void slb_dump_contents(void);
 
 extern void slb_vmalloc_update(void);
 extern void slb_set_size(u16 size);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 66577cc66dc9..799aa117cec3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -145,6 +145,41 @@ void slb_flush_and_rebolt(void)
 	get_paca()->slb_cache_ptr = 0;
 }
 
+void slb_dump_contents(void)
+{
+	int i;
+	unsigned long e, v;
+	unsigned long llp;
+
+	pr_err("slb contents:\n");
+	for (i = 0; i < mmu_slb_size; i++) {
+		asm volatile("slbmfee  %0,%1" : "=r" (e) : "r" (i));
+		asm volatile("slbmfev  %0,%1" : "=r" (v) : "r" (i));
+
+		if (!e && !v)
+			continue;
+
+		pr_err("%02d %016lx %016lx", i, e, v);
+
+		if (!(e & SLB_ESID_V)) {
+			pr_err("\n");
+			continue;
+		}
+		llp = v & SLB_VSID_LLP;
+		if (v & SLB_VSID_B_1T) {
+			pr_err("  1T  ESID=%9lx  VSID=%13lx LLP:%3lx\n",
+				GET_ESID_1T(e),
+				(v & ~SLB_VSID_B) >> SLB_VSID_SHIFT_1T,
+				llp);
+		} else {
+			pr_err(" 256M ESID=%9lx  VSID=%13lx LLP:%3lx\n",
+				GET_ESID(e),
+				(v & ~SLB_VSID_B) >> SLB_VSID_SHIFT,
+				llp);
+		}
+	}
+}
+
 void slb_vmalloc_update(void)
 {
 	unsigned long vflags;
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 5e1ef9150182..7470a216cd6b 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -422,6 +422,31 @@ int pSeries_system_reset_exception(struct pt_regs *regs)
 	return 0; /* need to perform reset */
 }
 
+static int mce_handle_error(struct rtas_error_log *errp)
+{
+	struct pseries_errorlog *pseries_log;
+	struct pseries_mc_errorlog *mce_log;
+	int disposition = rtas_error_disposition(errp);
+	uint8_t error_type;
+
+	pseries_log = get_pseries_errorlog(errp, PSERIES_ELOG_SECT_ID_MCE);
+	if (pseries_log == NULL)
+		goto out;
+
+	mce_log = (struct pseries_mc_errorlog *)pseries_log->data;
+	error_type = rtas_mc_error_type(mce_log);
+
+	if ((disposition == RTAS_DISP_NOT_RECOVERED) &&
+			(error_type == PSERIES_MC_ERROR_TYPE_SLB)) {
+		slb_dump_contents();
+		slb_flush_and_rebolt();
+		disposition = RTAS_DISP_FULLY_RECOVERED;
+	}
+
+out:
+	return disposition;
+}
+
 /*
  * See if we can recover from a machine check exception.
  * This is only called on power4 (or above) and only via
@@ -434,7 +459,9 @@ int pSeries_system_reset_exception(struct pt_regs *regs)
 static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err)
 {
 	int recovered = 0;
-	int disposition = rtas_error_disposition(err);
+	int disposition;
+
+	disposition = mce_handle_error(err);
 
 	if (!(regs->msr & MSR_RI)) {
 		/* If MSR_RI isn't set, we cannot recover */

[v2 PATCH 4/5] powerpc/pseries: Display machine check error details.

[Mahesh J Salgaonkar]

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

Extract the MCE eror details from RTAS extended log and display it to
console.

With this patch you should now see mce logs like below:

[  142.371818] Severe Machine check interrupt [Recovered]
[  142.371822]   NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
[  142.371822]   Initiator: CPU
[  142.371823]   Error type: SLB [Multihit]
[  142.371824]     Effective address: d00000000ca70000

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/rtas.h      |    5 +
 arch/powerpc/platforms/pseries/ras.c |  128 +++++++++++++++++++++++++++++++++-
 2 files changed, 131 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 3f2fba7ef23b..8100a95c133a 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -190,6 +190,11 @@ static inline uint8_t rtas_error_extended(const struct rtas_error_log *elog)
 	return (elog->byte1 & 0x04) >> 2;
 }
 
+static inline uint8_t rtas_error_initiator(const struct rtas_error_log *elog)
+{
+	return (elog->byte2 & 0xf0) >> 4;
+}
+
 #define rtas_error_type(x)	((x)->byte3)
 
 static inline
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 7470a216cd6b..afdf05444bc2 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -422,7 +422,130 @@ int pSeries_system_reset_exception(struct pt_regs *regs)
 	return 0; /* need to perform reset */
 }
 
-static int mce_handle_error(struct rtas_error_log *errp)
+#define VAL_TO_STRING(ar, val)	((val < ARRAY_SIZE(ar)) ? ar[val] : "Unknown")
+
+static void pseries_print_mce_info(struct pt_regs *regs,
+				struct rtas_error_log *errp, int disposition)
+{
+	const char *level, *sevstr;
+	struct pseries_errorlog *pseries_log;
+	struct pseries_mc_errorlog *mce_log;
+	uint8_t error_type, err_sub_type;
+	uint8_t initiator = rtas_error_initiator(errp);
+	uint64_t addr;
+
+	static const char * const initiators[] = {
+		"Unknown",
+		"CPU",
+		"PCI",
+		"ISA",
+		"Memory",
+		"Power Mgmt",
+	};
+	static const char * const mc_err_types[] = {
+		"UE",
+		"SLB",
+		"ERAT",
+		"TLB",
+		"D-Cache",
+		"Unknown",
+		"I-Cache",
+	};
+	static const char * const mc_ue_types[] = {
+		"Indeterminate",
+		"Instruction fetch",
+		"Page table walk ifetch",
+		"Load/Store",
+		"Page table walk Load/Store",
+	};
+
+	/* SLB sub errors valid values are 0x0, 0x1, 0x2 */
+	static const char * const mc_slb_types[] = {
+		"Parity",
+		"Multihit",
+		"Indeterminate",
+	};
+
+	/* TLB and ERAT sub errors valid values are 0x1, 0x2, 0x3 */
+	static const char * const mc_soft_types[] = {
+		"Unknown",
+		"Parity",
+		"Multihit",
+		"Indeterminate",
+	};
+
+	pseries_log = get_pseries_errorlog(errp, PSERIES_ELOG_SECT_ID_MCE);
+	if (pseries_log == NULL)
+		return;
+
+	mce_log = (struct pseries_mc_errorlog *)pseries_log->data;
+
+	error_type = rtas_mc_error_type(mce_log);
+	err_sub_type = rtas_mc_error_sub_type(mce_log);
+
+	switch (rtas_error_severity(errp)) {
+	case RTAS_SEVERITY_NO_ERROR:
+		level = KERN_INFO;
+		sevstr = "Harmless";
+		break;
+	case RTAS_SEVERITY_WARNING:
+		level = KERN_WARNING;
+		sevstr = "";
+		break;
+	case RTAS_SEVERITY_ERROR:
+	case RTAS_SEVERITY_ERROR_SYNC:
+		level = KERN_ERR;
+		sevstr = "Severe";
+		break;
+	case RTAS_SEVERITY_FATAL:
+	default:
+		level = KERN_ERR;
+		sevstr = "Fatal";
+		break;
+	}
+
+	printk("%s%s Machine check interrupt [%s]\n", level, sevstr,
+		disposition == RTAS_DISP_FULLY_RECOVERED ?
+		"Recovered" : "Not recovered");
+	if (user_mode(regs)) {
+		printk("%s  NIP: [%016lx] PID: %d Comm: %s\n", level,
+			regs->nip, current->pid, current->comm);
+	} else {
+		printk("%s  NIP [%016lx]: %pS\n", level, regs->nip,
+			(void *)regs->nip);
+	}
+	printk("%s  Initiator: %s\n", level,
+				VAL_TO_STRING(initiators, initiator));
+
+	switch (error_type) {
+	case PSERIES_MC_ERROR_TYPE_UE:
+		printk("%s  Error type: %s [%s]\n", level,
+			VAL_TO_STRING(mc_err_types, error_type),
+			VAL_TO_STRING(mc_ue_types, err_sub_type));
+		break;
+	case PSERIES_MC_ERROR_TYPE_SLB:
+		printk("%s  Error type: %s [%s]\n", level,
+			VAL_TO_STRING(mc_err_types, error_type),
+			VAL_TO_STRING(mc_slb_types, err_sub_type));
+		break;
+	case PSERIES_MC_ERROR_TYPE_ERAT:
+	case PSERIES_MC_ERROR_TYPE_TLB:
+		printk("%s  Error type: %s [%s]\n", level,
+			VAL_TO_STRING(mc_err_types, error_type),
+			VAL_TO_STRING(mc_soft_types, err_sub_type));
+		break;
+	default:
+		printk("%s  Error type: %s\n", level,
+			VAL_TO_STRING(mc_err_types, error_type));
+		break;
+	}
+
+	addr = rtas_mc_get_effective_addr(mce_log);
+	if (addr)
+		printk("%s    Effective address: %016llx\n", level, addr);
+}
+
+static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
 {
 	struct pseries_errorlog *pseries_log;
 	struct pseries_mc_errorlog *mce_log;
@@ -442,6 +565,7 @@ static int mce_handle_error(struct rtas_error_log *errp)
 		slb_flush_and_rebolt();
 		disposition = RTAS_DISP_FULLY_RECOVERED;
 	}
+	pseries_print_mce_info(regs, errp, disposition);
 
 out:
 	return disposition;
@@ -461,7 +585,7 @@ static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err)
 	int recovered = 0;
 	int disposition;
 
-	disposition = mce_handle_error(err);
+	disposition = mce_handle_error(regs, err);
 
 	if (!(regs->msr & MSR_RI)) {
 		/* If MSR_RI isn't set, we cannot recover */

[v2 PATCH 5/5] powerpc/pseries: Fix endainness while restoring of

[Mahesh J Salgaonkar]

r3 in MCE handler.

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.

Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.

[   62.878965] Severe Machine check interrupt [Recovered]
[   62.878968]   NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
[   62.878969]   Initiator: CPU
[   62.878970]   Error type: SLB [Multihit]
[   62.878971]     Effective address: d00000000ca70000
cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
    pc: c0000000009694c0: vsnprintf+0x80/0x480
    lr: c0000000009698e0: vscnprintf+0x20/0x60
    sp: c0000000fc777830
   msr: 8000000002009033
   dar: a803a30c000000d0
  current = 0xc00000000bc9ef00
  paca    = 0xc00000001eca5c00	 softe: 3	 irq_happened: 0x01
    pid   = 8860, comm = insmod
[c0000000fc7778b0] c0000000009698e0 vscnprintf+0x20/0x60
[c0000000fc7778e0] c00000000016b6c4 vprintk_emit+0xb4/0x4b0
[c0000000fc777960] c00000000016d40c vprintk_func+0x5c/0xd0
[c0000000fc777980] c00000000016cbb4 printk+0x38/0x4c
[c0000000fc7779a0] d00000000ca301c0 init_module+0x1c0/0x338 [bork_kernel]
[c0000000fc777a40] c00000000000d9c4 do_one_initcall+0x54/0x230
[c0000000fc777b00] c0000000001b3b74 do_init_module+0x8c/0x248
[c0000000fc777b90] c0000000001b2478 load_module+0x12b8/0x15b0
[c0000000fc777d30] c0000000001b29e8 sys_finit_module+0xa8/0x110
[c0000000fc777e30] c00000000000b204 system_call+0x58/0x6c
--- Exception: c00 (System Call) at 00007fff8bda0644
SP (7fffdfbfe980) is in userspace

This patch fixes this issue.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/ras.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index afdf05444bc2..cd9446980092 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -360,7 +360,7 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
 	}
 
 	savep = __va(regs->gpr[3]);
-	regs->gpr[3] = savep[0];	/* restore original r3 */
+	regs->gpr[3] = be64_to_cpu(savep[0]);	/* restore original r3 */
 
 	/* If it isn't an extended log we can use the per cpu 64bit buffer */
 	h = (struct rtas_error_log *)&savep[1];

Re: [v2 PATCH 0/5] powerpc/pseries: Machien check handler improvements.

[Nicholas Piggin]

On Thu, 07 Jun 2018 15:36:25 +0530
Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com> wrote:

> This patch series includes some improvement to Machine check handler
> for pseries. Patch 1 fixes an issue where machine check handler crashes
> kernel while accessing vmalloc-ed buffer while in nmi context.
> Patch 3 dumps the SLB contents on SLB MCE errors to improve the debugability.
> Patch 4 display's the MCE error details on console.
> 
> Change in V2:
> - patch 4: Display additional info (NIP and task info) in MCE error details.
> - patch 5: Fix endain bug while restoring of r3 in MCE handler.
> 
> ---
> 
> Mahesh Salgaonkar (5):
>       powerpc/pseries: convert rtas_log_buf to linear allocation.
>       powerpc/pseries: Define MCE error event section.
>       powerpc/pseries: Dump and flush SLB contents on SLB MCE errors.
>       powerpc/pseries: Display machine check error details.
>       powerpc/pseries: Fix endainness while restoring of r3 in MCE handler.

These look good, should patch 5 be moved to patch 2 and the first 2
patches marked for stable?

Do you also plan to dump SLB contents for bare metal MCEs?

Thanks,
Nick

Re: [v2 PATCH 0/5] powerpc/pseries: Machien check handler improvements.

[Mahesh Jagannath Salgaonkar]

On 06/07/2018 04:15 PM, Nicholas Piggin wrote:
> On Thu, 07 Jun 2018 15:36:25 +0530
> Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com> wrote:
> 
>> This patch series includes some improvement to Machine check handler
>> for pseries. Patch 1 fixes an issue where machine check handler crashes
>> kernel while accessing vmalloc-ed buffer while in nmi context.
>> Patch 3 dumps the SLB contents on SLB MCE errors to improve the debugability.
>> Patch 4 display's the MCE error details on console.
>>
>> Change in V2:
>> - patch 4: Display additional info (NIP and task info) in MCE error details.
>> - patch 5: Fix endain bug while restoring of r3 in MCE handler.
>>
>> ---
>>
>> Mahesh Salgaonkar (5):
>>       powerpc/pseries: convert rtas_log_buf to linear allocation.
>>       powerpc/pseries: Define MCE error event section.
>>       powerpc/pseries: Dump and flush SLB contents on SLB MCE errors.
>>       powerpc/pseries: Display machine check error details.
>>       powerpc/pseries: Fix endainness while restoring of r3 in MCE handler.
> 
> These look good, should patch 5 be moved to patch 2 and the first 2
> patches marked for stable?

Yup. Will move patch 5 to 2nd position.

> 
> Do you also plan to dump SLB contents for bare metal MCEs?

Yes. That's the plan. Will do that separately.

Thanks,
-Mahesh.