From: Ulrich Hecht <uli+renesas@fpond.eu> To: laurent.pinchart@ideasonboard.com Cc: linux-renesas-soc@vger.kernel.org, dri-devel@lists.freedesktop.org, jacopo+renesas@jmondi.org, kieran.bingham+renesas@ideasonboard.com, Ulrich Hecht <uli+renesas@fpond.eu> Subject: [PROTO][PATCH 10/10] arm64: dts: renesas: r8a77995-draak: add HDMI output Date: Tue, 14 Aug 2018 15:50:04 +0200 [thread overview] Message-ID: <1534254604-24204-11-git-send-email-uli+renesas@fpond.eu> (raw) In-Reply-To: <1534254604-24204-1-git-send-email-uli+renesas@fpond.eu> Adds LVDS decoder, HDMI encoder and connector for Draak boards. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 84 ++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index bd5c6fa..157adf9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -24,6 +24,41 @@ stdout-path = "serial0:115200n8"; }; + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + vga { compatible = "vga-connector"; @@ -218,6 +253,43 @@ }; + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + /* Depends on LVDS */ + max-clock = <135000000>; + min-vrefresh = <50>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>; @@ -283,6 +355,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ulrich Hecht <uli+renesas@fpond.eu> To: laurent.pinchart@ideasonboard.com Cc: linux-renesas-soc@vger.kernel.org, kieran.bingham+renesas@ideasonboard.com, jacopo+renesas@jmondi.org, Ulrich Hecht <uli+renesas@fpond.eu>, dri-devel@lists.freedesktop.org Subject: [PROTO][PATCH 10/10] arm64: dts: renesas: r8a77995-draak: add HDMI output Date: Tue, 14 Aug 2018 15:50:04 +0200 [thread overview] Message-ID: <1534254604-24204-11-git-send-email-uli+renesas@fpond.eu> (raw) In-Reply-To: <1534254604-24204-1-git-send-email-uli+renesas@fpond.eu> Adds LVDS decoder, HDMI encoder and connector for Draak boards. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 84 ++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index bd5c6fa..157adf9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -24,6 +24,41 @@ stdout-path = "serial0:115200n8"; }; + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + vga { compatible = "vga-connector"; @@ -218,6 +253,43 @@ }; + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + /* Depends on LVDS */ + max-clock = <135000000>; + min-vrefresh = <50>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>; @@ -283,6 +355,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-08-14 16:38 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-14 13:49 [PROTO][PATCH 00/10] R-Car D3 LVDS/HDMI support (with PLL) Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-14 13:49 ` [PROTO][PATCH 01/10] drm: rcar-du: Add clk_set_rate for external clock device Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-20 10:10 ` Laurent Pinchart 2018-08-20 10:10 ` Laurent Pinchart 2018-08-14 13:49 ` [PROTO][PATCH 02/10] drm: rcar-du: Add r8a77995 device support Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-20 8:39 ` Laurent Pinchart 2018-08-20 8:39 ` Laurent Pinchart 2018-08-14 13:49 ` [PROTO][PATCH 03/10] drm: rcar-du: Fix digital RGB routing for R8A77995 Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-20 9:25 ` Laurent Pinchart 2018-08-20 9:25 ` Laurent Pinchart 2018-08-14 13:49 ` [PROTO][PATCH 04/10] drm: rcar-du: lvds: LVDS PLL support Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-20 10:48 ` Laurent Pinchart 2018-08-20 10:48 ` Laurent Pinchart 2018-08-14 13:49 ` [PROTO][PATCH 05/10] drm/bridge: adv7511: Add max-clock, min-vrefresh options Ulrich Hecht 2018-08-14 13:49 ` Ulrich Hecht 2018-08-20 9:28 ` Laurent Pinchart 2018-08-20 9:28 ` Laurent Pinchart 2018-08-21 8:03 ` Ulrich Hecht 2018-08-21 8:03 ` Ulrich Hecht 2018-08-21 8:09 ` Laurent Pinchart 2018-08-21 8:09 ` Laurent Pinchart 2018-08-22 9:13 ` Ulrich Hecht 2018-08-22 9:13 ` Ulrich Hecht 2018-08-22 14:00 ` Laurent Pinchart 2018-08-22 14:00 ` Laurent Pinchart 2018-08-14 13:50 ` [PROTO][PATCH 06/10] drm: rcar-du: Fix procedure for extal and dotclkin selection Ulrich Hecht 2018-08-14 13:50 ` Ulrich Hecht 2018-08-20 9:40 ` Laurent Pinchart 2018-08-20 9:40 ` Laurent Pinchart 2018-08-14 13:50 ` [PROTO][PATCH 07/10] arm64: dts: r8a77995-draak: set external clock for DU Ulrich Hecht 2018-08-14 13:50 ` Ulrich Hecht 2018-08-20 10:51 ` Laurent Pinchart 2018-08-20 10:51 ` Laurent Pinchart 2018-08-14 13:50 ` [PROTO][PATCH 08/10] drm: rcar-du: lvds: Handle LVDS interface reset Ulrich Hecht 2018-08-14 13:50 ` Ulrich Hecht 2018-08-14 13:50 ` [PROTO][PATCH 09/10] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht 2018-08-14 13:50 ` Ulrich Hecht 2018-08-14 13:50 ` Ulrich Hecht [this message] 2018-08-14 13:50 ` [PROTO][PATCH 10/10] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht 2018-08-20 11:01 ` Laurent Pinchart 2018-08-20 11:01 ` Laurent Pinchart 2018-08-20 9:50 ` [PROTO][PATCH 00/10] R-Car D3 LVDS/HDMI support (with PLL) Laurent Pinchart 2018-08-20 9:50 ` Laurent Pinchart 2018-08-21 8:02 ` Ulrich Hecht 2018-08-21 8:02 ` Ulrich Hecht
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1534254604-24204-11-git-send-email-uli+renesas@fpond.eu \ --to=uli+renesas@fpond.eu \ --cc=dri-devel@lists.freedesktop.org \ --cc=jacopo+renesas@jmondi.org \ --cc=kieran.bingham+renesas@ideasonboard.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-renesas-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.