From: sunil.kovvuri@gmail.com
To: linux-kernel@vger.kernel.org, arnd@arndb.de, olof@lixom.net
Cc: linux-arm-kernel@lists.infradead.org, linux-soc@vger.kernel.org,
andrew@lunn.ch, davem@davemloft.net,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v2 02/15] soc: octeontx2: Reset all RVU blocks
Date: Tue, 4 Sep 2018 17:24:37 +0530 [thread overview]
Message-ID: <1536062090-30446-3-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1536062090-30446-1-git-send-email-sunil.kovvuri@gmail.com>
From: Sunil Goutham <sgoutham@marvell.com>
Go through all BLKADDRs and check which ones are implemented
on this silicon and do a HW reset of each implemented block.
Also added all RVU AF and PF register offsets.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/soc/marvell/octeontx2/rvu.c | 78 ++++++++++++++++++++
drivers/soc/marvell/octeontx2/rvu.h | 37 ++++++++++
drivers/soc/marvell/octeontx2/rvu_reg.h | 113 +++++++++++++++++++++++++++++
drivers/soc/marvell/octeontx2/rvu_struct.h | 36 +++++++++
4 files changed, 264 insertions(+)
create mode 100644 drivers/soc/marvell/octeontx2/rvu_reg.h
create mode 100644 drivers/soc/marvell/octeontx2/rvu_struct.h
diff --git a/drivers/soc/marvell/octeontx2/rvu.c b/drivers/soc/marvell/octeontx2/rvu.c
index 5af4da6..d40fabf 100644
--- a/drivers/soc/marvell/octeontx2/rvu.c
+++ b/drivers/soc/marvell/octeontx2/rvu.c
@@ -16,6 +16,7 @@
#include <linux/sysfs.h>
#include "rvu.h"
+#include "rvu_reg.h"
#define DRV_NAME "octeontx2-af"
#define DRV_STRING "Marvell OcteonTX2 RVU Admin Function Driver"
@@ -33,6 +34,70 @@ MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, rvu_id_table);
+/* Poll a RVU block's register 'offset', for a 'zero'
+ * or 'nonzero' at bits specified by 'mask'
+ */
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero)
+{
+ void __iomem *reg;
+ int timeout = 100;
+ u64 reg_val;
+
+ reg = rvu->afreg_base + ((block << 28) | offset);
+ while (timeout) {
+ reg_val = readq(reg);
+ if (zero && !(reg_val & mask))
+ return 0;
+ if (!zero && (reg_val & mask))
+ return 0;
+ udelay(1);
+ cpu_relax();
+ timeout--;
+ }
+ return -EBUSY;
+}
+
+static void rvu_check_block_implemented(struct rvu *rvu)
+{
+ struct rvu_hwinfo *hw = rvu->hw;
+ struct rvu_block *block;
+ int blkid;
+ u64 cfg;
+
+ /* For each block check if 'implemented' bit is set */
+ for (blkid = 0; blkid < BLK_COUNT; blkid++) {
+ block = &hw->block[blkid];
+ cfg = rvupf_read64(rvu, RVU_PF_BLOCK_ADDRX_DISC(blkid));
+ if (cfg & BIT_ULL(11))
+ block->implemented = true;
+ }
+}
+
+static void rvu_block_reset(struct rvu *rvu, int blkaddr, u64 rst_reg)
+{
+ struct rvu_block *block = &rvu->hw->block[blkaddr];
+
+ if (!block->implemented)
+ return;
+
+ rvu_write64(rvu, blkaddr, rst_reg, BIT_ULL(0));
+ rvu_poll_reg(rvu, blkaddr, rst_reg, BIT_ULL(63), true);
+}
+
+static void rvu_reset_all_blocks(struct rvu *rvu)
+{
+ /* Do a HW reset of all RVU blocks */
+ rvu_block_reset(rvu, BLKADDR_NPA, NPA_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NIX0, NIX_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NPC, NPC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_SSO, SSO_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_TIM, TIM_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_CPT0, CPT_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC0, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC1, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC2, NDC_AF_BLK_RST);
+}
+
static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct device *dev = &pdev->dev;
@@ -43,6 +108,12 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (!rvu)
return -ENOMEM;
+ rvu->hw = devm_kzalloc(dev, sizeof(struct rvu_hwinfo), GFP_KERNEL);
+ if (!rvu->hw) {
+ devm_kfree(dev, rvu);
+ return -ENOMEM;
+ }
+
pci_set_drvdata(pdev, rvu);
rvu->pdev = pdev;
rvu->dev = &pdev->dev;
@@ -80,6 +151,11 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_release_regions;
}
+ /* Check which blocks the HW supports */
+ rvu_check_block_implemented(rvu);
+
+ rvu_reset_all_blocks(rvu);
+
return 0;
err_release_regions:
@@ -88,6 +164,7 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_disable_device(pdev);
err_freemem:
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(dev, rvu);
return err;
}
@@ -100,6 +177,7 @@ static void rvu_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(&pdev->dev, rvu);
}
diff --git a/drivers/soc/marvell/octeontx2/rvu.h b/drivers/soc/marvell/octeontx2/rvu.h
index 4a4b0ad..e2c54d0 100644
--- a/drivers/soc/marvell/octeontx2/rvu.h
+++ b/drivers/soc/marvell/octeontx2/rvu.h
@@ -11,6 +11,8 @@
#ifndef RVU_H
#define RVU_H
+#include "rvu_struct.h"
+
/* PCI device IDs */
#define PCI_DEVID_OCTEONTX2_RVU_AF 0xA065
@@ -21,11 +23,46 @@
#define NAME_SIZE 32
+struct rvu_block {
+ bool implemented;
+};
+
+struct rvu_hwinfo {
+ struct rvu_block block[BLK_COUNT]; /* Block info */
+};
+
struct rvu {
void __iomem *afreg_base;
void __iomem *pfreg_base;
struct pci_dev *pdev;
struct device *dev;
+ struct rvu_hwinfo *hw;
};
+static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
+{
+ writeq(val, rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline u64 rvu_read64(struct rvu *rvu, u64 block, u64 offset)
+{
+ return readq(rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline void rvupf_write64(struct rvu *rvu, u64 offset, u64 val)
+{
+ writeq(val, rvu->pfreg_base + offset);
+}
+
+static inline u64 rvupf_read64(struct rvu *rvu, u64 offset)
+{
+ return readq(rvu->pfreg_base + offset);
+}
+
+/* Function Prototypes
+ * RVU
+ */
+
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero);
+
#endif /* RVU_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_reg.h b/drivers/soc/marvell/octeontx2/rvu_reg.h
new file mode 100644
index 0000000..e7abd7e
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/rvu_reg.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_REG_H
+#define RVU_REG_H
+
+/* Admin function registers */
+#define RVU_AF_MSIXTR_BASE (0x10)
+#define RVU_AF_ECO (0x20)
+#define RVU_AF_BLK_RST (0x30)
+#define RVU_AF_PF_BAR4_ADDR (0x40)
+#define RVU_AF_RAS (0x100)
+#define RVU_AF_RAS_W1S (0x108)
+#define RVU_AF_RAS_ENA_W1S (0x110)
+#define RVU_AF_RAS_ENA_W1C (0x118)
+#define RVU_AF_GEN_INT (0x120)
+#define RVU_AF_GEN_INT_W1S (0x128)
+#define RVU_AF_GEN_INT_ENA_W1S (0x130)
+#define RVU_AF_GEN_INT_ENA_W1C (0x138)
+#define RVU_AF_AFPF_MBOX0 (0x02000)
+#define RVU_AF_AFPF_MBOX1 (0x02008)
+#define RVU_AF_AFPFX_MBOXX(a, b) (0x2000 | (a) << 4 | (b) << 3)
+#define RVU_AF_PFME_STATUS (0x2800)
+#define RVU_AF_PFTRPEND (0x2810)
+#define RVU_AF_PFTRPEND_W1S (0x2820)
+#define RVU_AF_PF_RST (0x2840)
+#define RVU_AF_HWVF_RST (0x2850)
+#define RVU_AF_PFAF_MBOX_INT (0x2880)
+#define RVU_AF_PFAF_MBOX_INT_W1S (0x2888)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1S (0x2890)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1C (0x2898)
+#define RVU_AF_PFFLR_INT (0x28a0)
+#define RVU_AF_PFFLR_INT_W1S (0x28a8)
+#define RVU_AF_PFFLR_INT_ENA_W1S (0x28b0)
+#define RVU_AF_PFFLR_INT_ENA_W1C (0x28b8)
+#define RVU_AF_PFME_INT (0x28c0)
+#define RVU_AF_PFME_INT_W1S (0x28c8)
+#define RVU_AF_PFME_INT_ENA_W1S (0x28d0)
+#define RVU_AF_PFME_INT_ENA_W1C (0x28d8)
+
+/* Admin function's privileged PF/VF registers */
+#define RVU_PRIV_CONST (0x8000000)
+#define RVU_PRIV_GEN_CFG (0x8000010)
+#define RVU_PRIV_CLK_CFG (0x8000020)
+#define RVU_PRIV_ACTIVE_PC (0x8000030)
+#define RVU_PRIV_PFX_CFG(a) (0x8000100 | (a) << 16)
+#define RVU_PRIV_PFX_MSIX_CFG(a) (0x8000110 | (a) << 16)
+#define RVU_PRIV_PFX_ID_CFG(a) (0x8000120 | (a) << 16)
+#define RVU_PRIV_PFX_INT_CFG(a) (0x8000200 | (a) << 16)
+#define RVU_PRIV_PFX_NIX_CFG (0x8000300)
+#define RVU_PRIV_PFX_NPA_CFG (0x8000310)
+#define RVU_PRIV_PFX_SSO_CFG (0x8000320)
+#define RVU_PRIV_PFX_SSOW_CFG (0x8000330)
+#define RVU_PRIV_PFX_TIM_CFG (0x8000340)
+#define RVU_PRIV_PFX_CPT_CFG (0x8000350)
+#define RVU_PRIV_BLOCK_TYPEX_REV(a) (0x8000400 | (a) << 3)
+#define RVU_PRIV_HWVFX_INT_CFG(a) (0x8001280 | (a) << 16)
+#define RVU_PRIV_HWVFX_NIX_CFG (0x8001300)
+#define RVU_PRIV_HWVFX_NPA_CFG (0x8001310)
+#define RVU_PRIV_HWVFX_SSO_CFG (0x8001320)
+#define RVU_PRIV_HWVFX_SSOW_CFG (0x8001330)
+#define RVU_PRIV_HWVFX_TIM_CFG (0x8001340)
+#define RVU_PRIV_HWVFX_CPT_CFG (0x8001350)
+
+/* RVU PF registers */
+#define RVU_PF_VFX_PFVF_MBOX0 (0x00000)
+#define RVU_PF_VFX_PFVF_MBOX1 (0x00008)
+#define RVU_PF_VFX_PFVF_MBOXX(a, b) (0x0 | (a) << 12 | (b) << 3)
+#define RVU_PF_VF_BAR4_ADDR (0x10)
+#define RVU_PF_BLOCK_ADDRX_DISC(a) (0x200 | (a) << 3)
+#define RVU_PF_VFME_STATUSX(a) (0x800 | (a) << 3)
+#define RVU_PF_VFTRPENDX(a) (0x820 | (a) << 3)
+#define RVU_PF_VFTRPEND_W1SX(a) (0x840 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INTX(a) (0x880 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_W1SX(a) (0x8A0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1SX(a) (0x8C0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1CX(a) (0x8E0 | (a) << 3)
+#define RVU_PF_VFFLR_INTX(a) (0x900 | (a) << 3)
+#define RVU_PF_VFFLR_INT_W1SX(a) (0x920 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1SX(a) (0x940 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1CX(a) (0x960 | (a) << 3)
+#define RVU_PF_VFME_INTX(a) (0x980 | (a) << 3)
+#define RVU_PF_VFME_INT_W1SX(a) (0x9A0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1SX(a) (0x9C0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1CX(a) (0x9E0 | (a) << 3)
+#define RVU_PF_PFAF_MBOX0 (0xC00)
+#define RVU_PF_PFAF_MBOX1 (0xC08)
+#define RVU_PF_PFAF_MBOXX(a) (0xC00 | (a) << 3)
+#define RVU_PF_INT (0xc20)
+#define RVU_PF_INT_W1S (0xc28)
+#define RVU_PF_INT_ENA_W1S (0xc30)
+#define RVU_PF_INT_ENA_W1C (0xc38)
+#define RVU_PF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
+#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
+#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+
+
+#define NPA_AF_BLK_RST (0x0000)
+#define NIX_AF_BLK_RST (0x00B0)
+#define SSO_AF_BLK_RST (0x10f8)
+#define TIM_AF_BLK_RST (0x10)
+#define CPT_AF_BLK_RST (0x46000)
+#define NDC_AF_BLK_RST (0x002F0)
+#define NPC_AF_BLK_RST (0x00040)
+
+#endif /* RVU_REG_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_struct.h b/drivers/soc/marvell/octeontx2/rvu_struct.h
new file mode 100644
index 0000000..4122559
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/rvu_struct.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_STRUCT_H
+#define RVU_STRUCT_H
+
+/*
+ * RVU Block Address Enumeration
+ */
+enum rvu_block_addr_e {
+ BLKADDR_RVUM = 0x0ULL,
+ BLKADDR_LMT = 0x1ULL,
+ BLKADDR_MSIX = 0x2ULL,
+ BLKADDR_NPA = 0x3ULL,
+ BLKADDR_NIX0 = 0x4ULL,
+ BLKADDR_NIX1 = 0x5ULL,
+ BLKADDR_NPC = 0x6ULL,
+ BLKADDR_SSO = 0x7ULL,
+ BLKADDR_SSOW = 0x8ULL,
+ BLKADDR_TIM = 0x9ULL,
+ BLKADDR_CPT0 = 0xaULL,
+ BLKADDR_CPT1 = 0xbULL,
+ BLKADDR_NDC0 = 0xcULL,
+ BLKADDR_NDC1 = 0xdULL,
+ BLKADDR_NDC2 = 0xeULL,
+ BLK_COUNT = 0xfULL,
+};
+
+#endif /* RVU_STRUCT_H */
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: sunil.kovvuri@gmail.com (sunil.kovvuri at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 02/15] soc: octeontx2: Reset all RVU blocks
Date: Tue, 4 Sep 2018 17:24:37 +0530 [thread overview]
Message-ID: <1536062090-30446-3-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1536062090-30446-1-git-send-email-sunil.kovvuri@gmail.com>
From: Sunil Goutham <sgoutham@marvell.com>
Go through all BLKADDRs and check which ones are implemented
on this silicon and do a HW reset of each implemented block.
Also added all RVU AF and PF register offsets.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/soc/marvell/octeontx2/rvu.c | 78 ++++++++++++++++++++
drivers/soc/marvell/octeontx2/rvu.h | 37 ++++++++++
drivers/soc/marvell/octeontx2/rvu_reg.h | 113 +++++++++++++++++++++++++++++
drivers/soc/marvell/octeontx2/rvu_struct.h | 36 +++++++++
4 files changed, 264 insertions(+)
create mode 100644 drivers/soc/marvell/octeontx2/rvu_reg.h
create mode 100644 drivers/soc/marvell/octeontx2/rvu_struct.h
diff --git a/drivers/soc/marvell/octeontx2/rvu.c b/drivers/soc/marvell/octeontx2/rvu.c
index 5af4da6..d40fabf 100644
--- a/drivers/soc/marvell/octeontx2/rvu.c
+++ b/drivers/soc/marvell/octeontx2/rvu.c
@@ -16,6 +16,7 @@
#include <linux/sysfs.h>
#include "rvu.h"
+#include "rvu_reg.h"
#define DRV_NAME "octeontx2-af"
#define DRV_STRING "Marvell OcteonTX2 RVU Admin Function Driver"
@@ -33,6 +34,70 @@ MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, rvu_id_table);
+/* Poll a RVU block's register 'offset', for a 'zero'
+ * or 'nonzero' at bits specified by 'mask'
+ */
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero)
+{
+ void __iomem *reg;
+ int timeout = 100;
+ u64 reg_val;
+
+ reg = rvu->afreg_base + ((block << 28) | offset);
+ while (timeout) {
+ reg_val = readq(reg);
+ if (zero && !(reg_val & mask))
+ return 0;
+ if (!zero && (reg_val & mask))
+ return 0;
+ udelay(1);
+ cpu_relax();
+ timeout--;
+ }
+ return -EBUSY;
+}
+
+static void rvu_check_block_implemented(struct rvu *rvu)
+{
+ struct rvu_hwinfo *hw = rvu->hw;
+ struct rvu_block *block;
+ int blkid;
+ u64 cfg;
+
+ /* For each block check if 'implemented' bit is set */
+ for (blkid = 0; blkid < BLK_COUNT; blkid++) {
+ block = &hw->block[blkid];
+ cfg = rvupf_read64(rvu, RVU_PF_BLOCK_ADDRX_DISC(blkid));
+ if (cfg & BIT_ULL(11))
+ block->implemented = true;
+ }
+}
+
+static void rvu_block_reset(struct rvu *rvu, int blkaddr, u64 rst_reg)
+{
+ struct rvu_block *block = &rvu->hw->block[blkaddr];
+
+ if (!block->implemented)
+ return;
+
+ rvu_write64(rvu, blkaddr, rst_reg, BIT_ULL(0));
+ rvu_poll_reg(rvu, blkaddr, rst_reg, BIT_ULL(63), true);
+}
+
+static void rvu_reset_all_blocks(struct rvu *rvu)
+{
+ /* Do a HW reset of all RVU blocks */
+ rvu_block_reset(rvu, BLKADDR_NPA, NPA_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NIX0, NIX_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NPC, NPC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_SSO, SSO_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_TIM, TIM_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_CPT0, CPT_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC0, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC1, NDC_AF_BLK_RST);
+ rvu_block_reset(rvu, BLKADDR_NDC2, NDC_AF_BLK_RST);
+}
+
static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct device *dev = &pdev->dev;
@@ -43,6 +108,12 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (!rvu)
return -ENOMEM;
+ rvu->hw = devm_kzalloc(dev, sizeof(struct rvu_hwinfo), GFP_KERNEL);
+ if (!rvu->hw) {
+ devm_kfree(dev, rvu);
+ return -ENOMEM;
+ }
+
pci_set_drvdata(pdev, rvu);
rvu->pdev = pdev;
rvu->dev = &pdev->dev;
@@ -80,6 +151,11 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_release_regions;
}
+ /* Check which blocks the HW supports */
+ rvu_check_block_implemented(rvu);
+
+ rvu_reset_all_blocks(rvu);
+
return 0;
err_release_regions:
@@ -88,6 +164,7 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_disable_device(pdev);
err_freemem:
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(dev, rvu);
return err;
}
@@ -100,6 +177,7 @@ static void rvu_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ devm_kfree(&pdev->dev, rvu->hw);
devm_kfree(&pdev->dev, rvu);
}
diff --git a/drivers/soc/marvell/octeontx2/rvu.h b/drivers/soc/marvell/octeontx2/rvu.h
index 4a4b0ad..e2c54d0 100644
--- a/drivers/soc/marvell/octeontx2/rvu.h
+++ b/drivers/soc/marvell/octeontx2/rvu.h
@@ -11,6 +11,8 @@
#ifndef RVU_H
#define RVU_H
+#include "rvu_struct.h"
+
/* PCI device IDs */
#define PCI_DEVID_OCTEONTX2_RVU_AF 0xA065
@@ -21,11 +23,46 @@
#define NAME_SIZE 32
+struct rvu_block {
+ bool implemented;
+};
+
+struct rvu_hwinfo {
+ struct rvu_block block[BLK_COUNT]; /* Block info */
+};
+
struct rvu {
void __iomem *afreg_base;
void __iomem *pfreg_base;
struct pci_dev *pdev;
struct device *dev;
+ struct rvu_hwinfo *hw;
};
+static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
+{
+ writeq(val, rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline u64 rvu_read64(struct rvu *rvu, u64 block, u64 offset)
+{
+ return readq(rvu->afreg_base + ((block << 28) | offset));
+}
+
+static inline void rvupf_write64(struct rvu *rvu, u64 offset, u64 val)
+{
+ writeq(val, rvu->pfreg_base + offset);
+}
+
+static inline u64 rvupf_read64(struct rvu *rvu, u64 offset)
+{
+ return readq(rvu->pfreg_base + offset);
+}
+
+/* Function Prototypes
+ * RVU
+ */
+
+int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero);
+
#endif /* RVU_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_reg.h b/drivers/soc/marvell/octeontx2/rvu_reg.h
new file mode 100644
index 0000000..e7abd7e
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/rvu_reg.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_REG_H
+#define RVU_REG_H
+
+/* Admin function registers */
+#define RVU_AF_MSIXTR_BASE (0x10)
+#define RVU_AF_ECO (0x20)
+#define RVU_AF_BLK_RST (0x30)
+#define RVU_AF_PF_BAR4_ADDR (0x40)
+#define RVU_AF_RAS (0x100)
+#define RVU_AF_RAS_W1S (0x108)
+#define RVU_AF_RAS_ENA_W1S (0x110)
+#define RVU_AF_RAS_ENA_W1C (0x118)
+#define RVU_AF_GEN_INT (0x120)
+#define RVU_AF_GEN_INT_W1S (0x128)
+#define RVU_AF_GEN_INT_ENA_W1S (0x130)
+#define RVU_AF_GEN_INT_ENA_W1C (0x138)
+#define RVU_AF_AFPF_MBOX0 (0x02000)
+#define RVU_AF_AFPF_MBOX1 (0x02008)
+#define RVU_AF_AFPFX_MBOXX(a, b) (0x2000 | (a) << 4 | (b) << 3)
+#define RVU_AF_PFME_STATUS (0x2800)
+#define RVU_AF_PFTRPEND (0x2810)
+#define RVU_AF_PFTRPEND_W1S (0x2820)
+#define RVU_AF_PF_RST (0x2840)
+#define RVU_AF_HWVF_RST (0x2850)
+#define RVU_AF_PFAF_MBOX_INT (0x2880)
+#define RVU_AF_PFAF_MBOX_INT_W1S (0x2888)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1S (0x2890)
+#define RVU_AF_PFAF_MBOX_INT_ENA_W1C (0x2898)
+#define RVU_AF_PFFLR_INT (0x28a0)
+#define RVU_AF_PFFLR_INT_W1S (0x28a8)
+#define RVU_AF_PFFLR_INT_ENA_W1S (0x28b0)
+#define RVU_AF_PFFLR_INT_ENA_W1C (0x28b8)
+#define RVU_AF_PFME_INT (0x28c0)
+#define RVU_AF_PFME_INT_W1S (0x28c8)
+#define RVU_AF_PFME_INT_ENA_W1S (0x28d0)
+#define RVU_AF_PFME_INT_ENA_W1C (0x28d8)
+
+/* Admin function's privileged PF/VF registers */
+#define RVU_PRIV_CONST (0x8000000)
+#define RVU_PRIV_GEN_CFG (0x8000010)
+#define RVU_PRIV_CLK_CFG (0x8000020)
+#define RVU_PRIV_ACTIVE_PC (0x8000030)
+#define RVU_PRIV_PFX_CFG(a) (0x8000100 | (a) << 16)
+#define RVU_PRIV_PFX_MSIX_CFG(a) (0x8000110 | (a) << 16)
+#define RVU_PRIV_PFX_ID_CFG(a) (0x8000120 | (a) << 16)
+#define RVU_PRIV_PFX_INT_CFG(a) (0x8000200 | (a) << 16)
+#define RVU_PRIV_PFX_NIX_CFG (0x8000300)
+#define RVU_PRIV_PFX_NPA_CFG (0x8000310)
+#define RVU_PRIV_PFX_SSO_CFG (0x8000320)
+#define RVU_PRIV_PFX_SSOW_CFG (0x8000330)
+#define RVU_PRIV_PFX_TIM_CFG (0x8000340)
+#define RVU_PRIV_PFX_CPT_CFG (0x8000350)
+#define RVU_PRIV_BLOCK_TYPEX_REV(a) (0x8000400 | (a) << 3)
+#define RVU_PRIV_HWVFX_INT_CFG(a) (0x8001280 | (a) << 16)
+#define RVU_PRIV_HWVFX_NIX_CFG (0x8001300)
+#define RVU_PRIV_HWVFX_NPA_CFG (0x8001310)
+#define RVU_PRIV_HWVFX_SSO_CFG (0x8001320)
+#define RVU_PRIV_HWVFX_SSOW_CFG (0x8001330)
+#define RVU_PRIV_HWVFX_TIM_CFG (0x8001340)
+#define RVU_PRIV_HWVFX_CPT_CFG (0x8001350)
+
+/* RVU PF registers */
+#define RVU_PF_VFX_PFVF_MBOX0 (0x00000)
+#define RVU_PF_VFX_PFVF_MBOX1 (0x00008)
+#define RVU_PF_VFX_PFVF_MBOXX(a, b) (0x0 | (a) << 12 | (b) << 3)
+#define RVU_PF_VF_BAR4_ADDR (0x10)
+#define RVU_PF_BLOCK_ADDRX_DISC(a) (0x200 | (a) << 3)
+#define RVU_PF_VFME_STATUSX(a) (0x800 | (a) << 3)
+#define RVU_PF_VFTRPENDX(a) (0x820 | (a) << 3)
+#define RVU_PF_VFTRPEND_W1SX(a) (0x840 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INTX(a) (0x880 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_W1SX(a) (0x8A0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1SX(a) (0x8C0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1CX(a) (0x8E0 | (a) << 3)
+#define RVU_PF_VFFLR_INTX(a) (0x900 | (a) << 3)
+#define RVU_PF_VFFLR_INT_W1SX(a) (0x920 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1SX(a) (0x940 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1CX(a) (0x960 | (a) << 3)
+#define RVU_PF_VFME_INTX(a) (0x980 | (a) << 3)
+#define RVU_PF_VFME_INT_W1SX(a) (0x9A0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1SX(a) (0x9C0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1CX(a) (0x9E0 | (a) << 3)
+#define RVU_PF_PFAF_MBOX0 (0xC00)
+#define RVU_PF_PFAF_MBOX1 (0xC08)
+#define RVU_PF_PFAF_MBOXX(a) (0xC00 | (a) << 3)
+#define RVU_PF_INT (0xc20)
+#define RVU_PF_INT_W1S (0xc28)
+#define RVU_PF_INT_ENA_W1S (0xc30)
+#define RVU_PF_INT_ENA_W1C (0xc38)
+#define RVU_PF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
+#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
+#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+
+
+#define NPA_AF_BLK_RST (0x0000)
+#define NIX_AF_BLK_RST (0x00B0)
+#define SSO_AF_BLK_RST (0x10f8)
+#define TIM_AF_BLK_RST (0x10)
+#define CPT_AF_BLK_RST (0x46000)
+#define NDC_AF_BLK_RST (0x002F0)
+#define NPC_AF_BLK_RST (0x00040)
+
+#endif /* RVU_REG_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_struct.h b/drivers/soc/marvell/octeontx2/rvu_struct.h
new file mode 100644
index 0000000..4122559
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/rvu_struct.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RVU_STRUCT_H
+#define RVU_STRUCT_H
+
+/*
+ * RVU Block Address Enumeration
+ */
+enum rvu_block_addr_e {
+ BLKADDR_RVUM = 0x0ULL,
+ BLKADDR_LMT = 0x1ULL,
+ BLKADDR_MSIX = 0x2ULL,
+ BLKADDR_NPA = 0x3ULL,
+ BLKADDR_NIX0 = 0x4ULL,
+ BLKADDR_NIX1 = 0x5ULL,
+ BLKADDR_NPC = 0x6ULL,
+ BLKADDR_SSO = 0x7ULL,
+ BLKADDR_SSOW = 0x8ULL,
+ BLKADDR_TIM = 0x9ULL,
+ BLKADDR_CPT0 = 0xaULL,
+ BLKADDR_CPT1 = 0xbULL,
+ BLKADDR_NDC0 = 0xcULL,
+ BLKADDR_NDC1 = 0xdULL,
+ BLKADDR_NDC2 = 0xeULL,
+ BLK_COUNT = 0xfULL,
+};
+
+#endif /* RVU_STRUCT_H */
--
2.7.4
next prev parent reply other threads:[~2018-09-04 11:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 11:54 [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 01/15] soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` sunil.kovvuri [this message]
2018-09-04 11:54 ` [PATCH v2 02/15] soc: octeontx2: Reset all RVU blocks sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 03/15] soc: octeontx2: Gather RVU blocks HW info sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 04/15] soc: octeontx2: Add mailbox support infra sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 05/15] soc: octeontx2: Add mailbox IRQ and msg handlers sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 06/15] soc: octeontx2: Convert mbox msg id check to a macro sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 07/15] soc: octeontx2: Scan blocks for LFs provisioned to PF/VF sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 08/15] soc: octeontx2: Add RVU block LF provisioning support sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 09/15] soc: octeontx2: Configure block LF's MSIX vector offset sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 10/15] soc: octeontx2: Reconfig MSIX base with IOVA sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 12/15] soc: octeontx2: Set RVU PFs to CGX LMACs mapping sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 13/15] soc: octeontx2: Add support for CGX link management sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 14/15] soc: octeontx2: Register for CGX lmac events sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 12:46 ` [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver Andrew Lunn
2018-09-04 12:46 ` Andrew Lunn
2018-09-04 16:14 ` Sunil Kovvuri
2018-09-04 16:14 ` Sunil Kovvuri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536062090-30446-3-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.