From: sunil.kovvuri@gmail.com
To: linux-kernel@vger.kernel.org, arnd@arndb.de, olof@lixom.net
Cc: linux-arm-kernel@lists.infradead.org, linux-soc@vger.kernel.org,
andrew@lunn.ch, davem@davemloft.net,
Aleksey Makarov <amakarov@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>,
Lukasz Bartosik <lbartosik@marvell.com>
Subject: [PATCH v2 04/15] soc: octeontx2: Add mailbox support infra
Date: Tue, 4 Sep 2018 17:24:39 +0530 [thread overview]
Message-ID: <1536062090-30446-5-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1536062090-30446-1-git-send-email-sunil.kovvuri@gmail.com>
From: Aleksey Makarov <amakarov@marvell.com>
This patch adds mailbox support infrastructure APIs.
Each RVU device has a dedicated 64KB mailbox region
shared with it's peer for communication. RVU AF has
a separate mailbox region shared with each of RVU PFs
and a RVU PF has a separate region shared with each of
it's VF.
These set of APIs are used by this driver (RVU AF) and
other RVU PF/VF drivers eg netdev, crypto e.t.c.
Signed-off-by: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
drivers/soc/marvell/Kconfig | 4 +
drivers/soc/marvell/octeontx2/Makefile | 2 +
drivers/soc/marvell/octeontx2/mbox.c | 303 ++++++++++++++++++++++++++++++++
drivers/soc/marvell/octeontx2/mbox.h | 142 +++++++++++++++
drivers/soc/marvell/octeontx2/rvu_reg.h | 4 +
5 files changed, 455 insertions(+)
create mode 100644 drivers/soc/marvell/octeontx2/mbox.c
create mode 100644 drivers/soc/marvell/octeontx2/mbox.h
diff --git a/drivers/soc/marvell/Kconfig b/drivers/soc/marvell/Kconfig
index 4499caf..428d22e 100644
--- a/drivers/soc/marvell/Kconfig
+++ b/drivers/soc/marvell/Kconfig
@@ -4,8 +4,12 @@
menu "Marvell SoC drivers"
+config OCTEONTX2_MBOX
+ tristate
+
config OCTEONTX2_AF
tristate "OcteonTX2 RVU Admin Function driver"
+ select OCTEONTX2_MBOX
depends on ARM64 && PCI
help
This driver supports Marvell's OcteonTX2 Resource Virtualization
diff --git a/drivers/soc/marvell/octeontx2/Makefile b/drivers/soc/marvell/octeontx2/Makefile
index dacbd16..ac17cb9 100644
--- a/drivers/soc/marvell/octeontx2/Makefile
+++ b/drivers/soc/marvell/octeontx2/Makefile
@@ -3,6 +3,8 @@
# Makefile for Marvell's OcteonTX2 RVU Admin Function driver
#
+obj-$(CONFIG_OCTEONTX2_MBOX) += octeontx2_mbox.o
obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
+octeontx2_mbox-y := mbox.o
octeontx2_af-y := rvu.o
diff --git a/drivers/soc/marvell/octeontx2/mbox.c b/drivers/soc/marvell/octeontx2/mbox.c
new file mode 100644
index 0000000..0722fa4
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/mbox.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include "rvu_reg.h"
+#include "mbox.h"
+
+static const u16 msgs_offset = ALIGN(sizeof(struct mbox_hdr), MBOX_MSG_ALIGN);
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ struct mbox_hdr *rx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ tx_hdr->num_msgs = 0;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+}
+EXPORT_SYMBOL(otx2_mbox_reset);
+
+void otx2_mbox_destroy(struct otx2_mbox *mbox)
+{
+ mbox->reg_base = NULL;
+ mbox->hwbase = NULL;
+
+ kfree(mbox->dev);
+ mbox->dev = NULL;
+}
+EXPORT_SYMBOL(otx2_mbox_destroy);
+
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs)
+{
+ int devid;
+ struct otx2_mbox_dev *mdev;
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_PFVF:
+ mbox->tx_start = MBOX_DOWN_TX_START;
+ mbox->rx_start = MBOX_DOWN_RX_START;
+ mbox->tx_size = MBOX_DOWN_TX_SIZE;
+ mbox->rx_size = MBOX_DOWN_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_VFPF:
+ mbox->tx_start = MBOX_DOWN_RX_START;
+ mbox->rx_start = MBOX_DOWN_TX_START;
+ mbox->tx_size = MBOX_DOWN_RX_SIZE;
+ mbox->rx_size = MBOX_DOWN_TX_SIZE;
+ break;
+ case MBOX_DIR_AFPF_UP:
+ case MBOX_DIR_PFVF_UP:
+ mbox->tx_start = MBOX_UP_TX_START;
+ mbox->rx_start = MBOX_UP_RX_START;
+ mbox->tx_size = MBOX_UP_TX_SIZE;
+ mbox->rx_size = MBOX_UP_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF_UP:
+ case MBOX_DIR_VFPF_UP:
+ mbox->tx_start = MBOX_UP_RX_START;
+ mbox->rx_start = MBOX_UP_TX_START;
+ mbox->tx_size = MBOX_UP_RX_SIZE;
+ mbox->rx_size = MBOX_UP_TX_SIZE;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_AFPF_UP:
+ mbox->trigger = RVU_AF_AFPF_MBOX0;
+ mbox->tr_shift = 4;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_PFAF_UP:
+ mbox->trigger = RVU_PF_PFAF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ case MBOX_DIR_PFVF:
+ case MBOX_DIR_PFVF_UP:
+ mbox->trigger = RVU_PF_VFX_PFVF_MBOX0;
+ mbox->tr_shift = 12;
+ break;
+ case MBOX_DIR_VFPF:
+ case MBOX_DIR_VFPF_UP:
+ mbox->trigger = RVU_VF_VFPF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ mbox->reg_base = reg_base;
+ mbox->hwbase = hwbase;
+ mbox->pdev = pdev;
+
+ mbox->dev = kcalloc(ndevs, sizeof(struct otx2_mbox_dev), GFP_KERNEL);
+ if (!mbox->dev) {
+ otx2_mbox_destroy(mbox);
+ return -ENOMEM;
+ }
+
+ mbox->ndevs = ndevs;
+ for (devid = 0; devid < ndevs; devid++) {
+ mdev = &mbox->dev[devid];
+ mdev->mbase = mbox->hwbase + (devid * MBOX_SIZE);
+ spin_lock_init(&mdev->mbox_lock);
+ /* Init header to reset value */
+ otx2_mbox_reset(mbox, devid);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_init);
+
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ int timeout = 0, sleep = 1;
+
+ while (mdev->num_msgs != mdev->msgs_acked) {
+ msleep(sleep);
+ timeout += sleep;
+ if (timeout >= MBOX_RSP_TIMEOUT)
+ return -EIO;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_wait_for_rsp);
+
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ unsigned long timeout = jiffies + 1 * HZ;
+
+ while (!time_after(jiffies, timeout)) {
+ if (mdev->num_msgs == mdev->msgs_acked)
+ return 0;
+ cpu_relax();
+ }
+ return -EIO;
+}
+EXPORT_SYMBOL(otx2_mbox_busy_poll_for_rsp);
+
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ struct mbox_hdr *rx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ /* Reset header for next messages */
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ mdev->msgs_acked = 0;
+
+ /* Sync mbox data into memory */
+ smp_wmb();
+
+ /* num_msgs != 0 signals to the peer that the buffer has a number of
+ * messages. So this should be written after writing all the messages
+ * to the shared memory.
+ */
+ tx_hdr->num_msgs = mdev->num_msgs;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ /* The interrupt should be fired after num_msgs is written
+ * to the shared memory
+ */
+ writeq(1, (void __iomem *)mbox->reg_base +
+ (mbox->trigger | (devid << mbox->tr_shift)));
+}
+EXPORT_SYMBOL(otx2_mbox_msg_send);
+
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_msghdr *msghdr = NULL;
+
+ spin_lock(&mdev->mbox_lock);
+ size = ALIGN(size, MBOX_MSG_ALIGN);
+ size_rsp = ALIGN(size_rsp, MBOX_MSG_ALIGN);
+ /* Check if there is space in mailbox */
+ if ((mdev->msg_size + size) > mbox->tx_size - msgs_offset)
+ goto exit;
+ if ((mdev->rsp_size + size_rsp) > mbox->rx_size - msgs_offset)
+ goto exit;
+
+ if (mdev->msg_size == 0)
+ mdev->num_msgs = 0;
+ mdev->num_msgs++;
+
+ msghdr = (struct mbox_msghdr *)(mdev->mbase + mbox->tx_start +
+ msgs_offset + mdev->msg_size);
+ /* Clear the whole msg region */
+ memset(msghdr, 0, sizeof(*msghdr) + size);
+ /* Init message header with reset values */
+ msghdr->ver = OTX2_MBOX_VERSION;
+ mdev->msg_size += size;
+ mdev->rsp_size += size_rsp;
+ msghdr->next_msgoff = mdev->msg_size + msgs_offset;
+exit:
+ spin_unlock(&mdev->mbox_lock);
+
+ return msghdr;
+}
+EXPORT_SYMBOL(otx2_mbox_alloc_msg_rsp);
+
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ unsigned long imsg = mbox->tx_start + msgs_offset;
+ unsigned long irsp = mbox->rx_start + msgs_offset;
+ u16 msgs;
+
+ if (mdev->num_msgs != mdev->msgs_acked)
+ return ERR_PTR(-ENODEV);
+
+ for (msgs = 0; msgs < mdev->msgs_acked; msgs++) {
+ struct mbox_msghdr *pmsg = mdev->mbase + imsg;
+ struct mbox_msghdr *prsp = mdev->mbase + irsp;
+
+ if (msg == pmsg) {
+ if (pmsg->id != prsp->id)
+ return ERR_PTR(-ENODEV);
+ return prsp;
+ }
+
+ imsg = pmsg->next_msgoff;
+ irsp = prsp->next_msgoff;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(otx2_mbox_get_rsp);
+
+int
+otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid, u16 pcifunc, u16 id)
+{
+ struct msg_rsp *rsp;
+
+ rsp = (struct msg_rsp *)
+ otx2_mbox_alloc_msg(mbox, devid, sizeof(*rsp));
+ if (!rsp)
+ return -ENOMEM;
+ rsp->hdr.id = id;
+ rsp->hdr.sig = OTX2_MBOX_RSP_SIG;
+ rsp->hdr.rc = MBOX_MSG_INVALID;
+ rsp->hdr.pcifunc = pcifunc;
+ return 0;
+}
+EXPORT_SYMBOL(otx2_reply_invalid_msg);
+
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ bool ret;
+
+ spin_lock(&mdev->mbox_lock);
+ ret = mdev->num_msgs != 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(otx2_mbox_nonempty);
+
+const char *otx2_mbox_id2name(u16 id)
+{
+ switch (id) {
+#define M(_name, _id, _1, _2) case _id: return # _name;
+ MBOX_MESSAGES
+#undef M
+ default:
+ return "INVALID ID";
+ }
+}
+EXPORT_SYMBOL(otx2_mbox_id2name);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/marvell/octeontx2/mbox.h b/drivers/soc/marvell/octeontx2/mbox.h
new file mode 100644
index 0000000..8e205fd
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/mbox.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MBOX_H
+#define MBOX_H
+
+#include <linux/etherdevice.h>
+#include <linux/sizes.h>
+
+#include "rvu_struct.h"
+
+#define MBOX_SIZE SZ_64K
+
+/* AF/PF: PF initiated, PF/VF VF initiated */
+#define MBOX_DOWN_RX_START 0
+#define MBOX_DOWN_RX_SIZE (46 * SZ_1K)
+#define MBOX_DOWN_TX_START (MBOX_DOWN_RX_START + MBOX_DOWN_RX_SIZE)
+#define MBOX_DOWN_TX_SIZE (16 * SZ_1K)
+/* AF/PF: AF initiated, PF/VF PF initiated */
+#define MBOX_UP_RX_START (MBOX_DOWN_TX_START + MBOX_DOWN_TX_SIZE)
+#define MBOX_UP_RX_SIZE SZ_1K
+#define MBOX_UP_TX_START (MBOX_UP_RX_START + MBOX_UP_RX_SIZE)
+#define MBOX_UP_TX_SIZE SZ_1K
+
+#if MBOX_UP_TX_SIZE + MBOX_UP_TX_START != MBOX_SIZE
+# error "incorrect mailbox area sizes"
+#endif
+
+#define MBOX_RSP_TIMEOUT 1000 /* in ms, Time to wait for mbox response */
+
+#define MBOX_MSG_ALIGN 16 /* Align mbox msg start to 16bytes */
+
+/* Mailbox directions */
+#define MBOX_DIR_AFPF 0 /* AF replies to PF */
+#define MBOX_DIR_PFAF 1 /* PF sends messages to AF */
+#define MBOX_DIR_PFVF 2 /* PF replies to VF */
+#define MBOX_DIR_VFPF 3 /* VF sends messages to PF */
+#define MBOX_DIR_AFPF_UP 4 /* AF sends messages to PF */
+#define MBOX_DIR_PFAF_UP 5 /* PF replies to AF */
+#define MBOX_DIR_PFVF_UP 6 /* PF sends messages to VF */
+#define MBOX_DIR_VFPF_UP 7 /* VF replies to PF */
+
+struct otx2_mbox_dev {
+ void *mbase; /* This dev's mbox region */
+ spinlock_t mbox_lock;
+ u16 msg_size; /* Total msg size to be sent */
+ u16 rsp_size; /* Total rsp size to be sure the reply is ok */
+ u16 num_msgs; /* No of msgs sent or waiting for response */
+ u16 msgs_acked; /* No of msgs for which response is received */
+};
+
+struct otx2_mbox {
+ struct pci_dev *pdev;
+ void *hwbase; /* Mbox region advertised by HW */
+ void *reg_base;/* CSR base for this dev */
+ u64 trigger; /* Trigger mbox notification */
+ u16 tr_shift; /* Mbox trigger shift */
+ u64 rx_start; /* Offset of Rx region in mbox memory */
+ u64 tx_start; /* Offset of Tx region in mbox memory */
+ u16 rx_size; /* Size of Rx region */
+ u16 tx_size; /* Size of Tx region */
+ u16 ndevs; /* The number of peers */
+ struct otx2_mbox_dev *dev;
+};
+
+/* Header which preceeds all mbox messages */
+struct mbox_hdr {
+ u16 num_msgs; /* No of msgs embedded */
+};
+
+/* Header which preceeds every msg and is also part of it */
+struct mbox_msghdr {
+ u16 pcifunc; /* Who's sending this msg */
+ u16 id; /* Mbox message ID */
+#define OTX2_MBOX_REQ_SIG (0xdead)
+#define OTX2_MBOX_RSP_SIG (0xbeef)
+ u16 sig; /* Signature, for validating corrupted msgs */
+#define OTX2_MBOX_VERSION (0x0001)
+ u16 ver; /* Version of msg's structure for this ID */
+ u16 next_msgoff; /* Offset of next msg within mailbox region */
+ int rc; /* Msg process'ed response code */
+};
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid);
+void otx2_mbox_destroy(struct otx2_mbox *mbox);
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs);
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid);
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp);
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg);
+int otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid,
+ u16 pcifunc, u16 id);
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid);
+const char *otx2_mbox_id2name(u16 id);
+static inline struct mbox_msghdr *otx2_mbox_alloc_msg(struct otx2_mbox *mbox,
+ int devid, int size)
+{
+ return otx2_mbox_alloc_msg_rsp(mbox, devid, size, 0);
+}
+
+/* Mailbox message types */
+#define MBOX_MSG_MASK 0xFFFF
+#define MBOX_MSG_INVALID 0xFFFE
+#define MBOX_MSG_MAX 0xFFFF
+
+#define MBOX_MESSAGES \
+M(READY, 0x001, msg_req, msg_rsp)
+
+enum {
+#define M(_name, _id, _1, _2) MBOX_MSG_ ## _name = _id,
+MBOX_MESSAGES
+#undef M
+};
+
+/* Mailbox message formats */
+
+/* Generic request msg used for those mbox messages which
+ * don't send any data in the request.
+ */
+struct msg_req {
+ struct mbox_msghdr hdr;
+};
+
+/* Generic rsponse msg used a ack or response for those mbox
+ * messages which doesn't have a specific rsp msg format.
+ */
+struct msg_rsp {
+ struct mbox_msghdr hdr;
+};
+
+#endif /* MBOX_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_reg.h b/drivers/soc/marvell/octeontx2/rvu_reg.h
index a7995d1..3bfb1e0 100644
--- a/drivers/soc/marvell/octeontx2/rvu_reg.h
+++ b/drivers/soc/marvell/octeontx2/rvu_reg.h
@@ -101,6 +101,10 @@
#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+/* RVU VF registers */
+#define RVU_VF_VFPF_MBOX0 (0x00000)
+#define RVU_VF_VFPF_MBOX1 (0x00008)
+
/* NPA block's admin function registers */
#define NPA_AF_BLK_RST (0x0000)
#define NPA_AF_CONST (0x0010)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: sunil.kovvuri@gmail.com (sunil.kovvuri at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/15] soc: octeontx2: Add mailbox support infra
Date: Tue, 4 Sep 2018 17:24:39 +0530 [thread overview]
Message-ID: <1536062090-30446-5-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1536062090-30446-1-git-send-email-sunil.kovvuri@gmail.com>
From: Aleksey Makarov <amakarov@marvell.com>
This patch adds mailbox support infrastructure APIs.
Each RVU device has a dedicated 64KB mailbox region
shared with it's peer for communication. RVU AF has
a separate mailbox region shared with each of RVU PFs
and a RVU PF has a separate region shared with each of
it's VF.
These set of APIs are used by this driver (RVU AF) and
other RVU PF/VF drivers eg netdev, crypto e.t.c.
Signed-off-by: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
drivers/soc/marvell/Kconfig | 4 +
drivers/soc/marvell/octeontx2/Makefile | 2 +
drivers/soc/marvell/octeontx2/mbox.c | 303 ++++++++++++++++++++++++++++++++
drivers/soc/marvell/octeontx2/mbox.h | 142 +++++++++++++++
drivers/soc/marvell/octeontx2/rvu_reg.h | 4 +
5 files changed, 455 insertions(+)
create mode 100644 drivers/soc/marvell/octeontx2/mbox.c
create mode 100644 drivers/soc/marvell/octeontx2/mbox.h
diff --git a/drivers/soc/marvell/Kconfig b/drivers/soc/marvell/Kconfig
index 4499caf..428d22e 100644
--- a/drivers/soc/marvell/Kconfig
+++ b/drivers/soc/marvell/Kconfig
@@ -4,8 +4,12 @@
menu "Marvell SoC drivers"
+config OCTEONTX2_MBOX
+ tristate
+
config OCTEONTX2_AF
tristate "OcteonTX2 RVU Admin Function driver"
+ select OCTEONTX2_MBOX
depends on ARM64 && PCI
help
This driver supports Marvell's OcteonTX2 Resource Virtualization
diff --git a/drivers/soc/marvell/octeontx2/Makefile b/drivers/soc/marvell/octeontx2/Makefile
index dacbd16..ac17cb9 100644
--- a/drivers/soc/marvell/octeontx2/Makefile
+++ b/drivers/soc/marvell/octeontx2/Makefile
@@ -3,6 +3,8 @@
# Makefile for Marvell's OcteonTX2 RVU Admin Function driver
#
+obj-$(CONFIG_OCTEONTX2_MBOX) += octeontx2_mbox.o
obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
+octeontx2_mbox-y := mbox.o
octeontx2_af-y := rvu.o
diff --git a/drivers/soc/marvell/octeontx2/mbox.c b/drivers/soc/marvell/octeontx2/mbox.c
new file mode 100644
index 0000000..0722fa4
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/mbox.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include "rvu_reg.h"
+#include "mbox.h"
+
+static const u16 msgs_offset = ALIGN(sizeof(struct mbox_hdr), MBOX_MSG_ALIGN);
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ struct mbox_hdr *rx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ tx_hdr->num_msgs = 0;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+}
+EXPORT_SYMBOL(otx2_mbox_reset);
+
+void otx2_mbox_destroy(struct otx2_mbox *mbox)
+{
+ mbox->reg_base = NULL;
+ mbox->hwbase = NULL;
+
+ kfree(mbox->dev);
+ mbox->dev = NULL;
+}
+EXPORT_SYMBOL(otx2_mbox_destroy);
+
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs)
+{
+ int devid;
+ struct otx2_mbox_dev *mdev;
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_PFVF:
+ mbox->tx_start = MBOX_DOWN_TX_START;
+ mbox->rx_start = MBOX_DOWN_RX_START;
+ mbox->tx_size = MBOX_DOWN_TX_SIZE;
+ mbox->rx_size = MBOX_DOWN_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_VFPF:
+ mbox->tx_start = MBOX_DOWN_RX_START;
+ mbox->rx_start = MBOX_DOWN_TX_START;
+ mbox->tx_size = MBOX_DOWN_RX_SIZE;
+ mbox->rx_size = MBOX_DOWN_TX_SIZE;
+ break;
+ case MBOX_DIR_AFPF_UP:
+ case MBOX_DIR_PFVF_UP:
+ mbox->tx_start = MBOX_UP_TX_START;
+ mbox->rx_start = MBOX_UP_RX_START;
+ mbox->tx_size = MBOX_UP_TX_SIZE;
+ mbox->rx_size = MBOX_UP_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF_UP:
+ case MBOX_DIR_VFPF_UP:
+ mbox->tx_start = MBOX_UP_RX_START;
+ mbox->rx_start = MBOX_UP_TX_START;
+ mbox->tx_size = MBOX_UP_RX_SIZE;
+ mbox->rx_size = MBOX_UP_TX_SIZE;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_AFPF_UP:
+ mbox->trigger = RVU_AF_AFPF_MBOX0;
+ mbox->tr_shift = 4;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_PFAF_UP:
+ mbox->trigger = RVU_PF_PFAF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ case MBOX_DIR_PFVF:
+ case MBOX_DIR_PFVF_UP:
+ mbox->trigger = RVU_PF_VFX_PFVF_MBOX0;
+ mbox->tr_shift = 12;
+ break;
+ case MBOX_DIR_VFPF:
+ case MBOX_DIR_VFPF_UP:
+ mbox->trigger = RVU_VF_VFPF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ mbox->reg_base = reg_base;
+ mbox->hwbase = hwbase;
+ mbox->pdev = pdev;
+
+ mbox->dev = kcalloc(ndevs, sizeof(struct otx2_mbox_dev), GFP_KERNEL);
+ if (!mbox->dev) {
+ otx2_mbox_destroy(mbox);
+ return -ENOMEM;
+ }
+
+ mbox->ndevs = ndevs;
+ for (devid = 0; devid < ndevs; devid++) {
+ mdev = &mbox->dev[devid];
+ mdev->mbase = mbox->hwbase + (devid * MBOX_SIZE);
+ spin_lock_init(&mdev->mbox_lock);
+ /* Init header to reset value */
+ otx2_mbox_reset(mbox, devid);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_init);
+
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ int timeout = 0, sleep = 1;
+
+ while (mdev->num_msgs != mdev->msgs_acked) {
+ msleep(sleep);
+ timeout += sleep;
+ if (timeout >= MBOX_RSP_TIMEOUT)
+ return -EIO;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_wait_for_rsp);
+
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ unsigned long timeout = jiffies + 1 * HZ;
+
+ while (!time_after(jiffies, timeout)) {
+ if (mdev->num_msgs == mdev->msgs_acked)
+ return 0;
+ cpu_relax();
+ }
+ return -EIO;
+}
+EXPORT_SYMBOL(otx2_mbox_busy_poll_for_rsp);
+
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ struct mbox_hdr *rx_hdr =
+ (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ /* Reset header for next messages */
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ mdev->msgs_acked = 0;
+
+ /* Sync mbox data into memory */
+ smp_wmb();
+
+ /* num_msgs != 0 signals to the peer that the buffer has a number of
+ * messages. So this should be written after writing all the messages
+ * to the shared memory.
+ */
+ tx_hdr->num_msgs = mdev->num_msgs;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ /* The interrupt should be fired after num_msgs is written
+ * to the shared memory
+ */
+ writeq(1, (void __iomem *)mbox->reg_base +
+ (mbox->trigger | (devid << mbox->tr_shift)));
+}
+EXPORT_SYMBOL(otx2_mbox_msg_send);
+
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_msghdr *msghdr = NULL;
+
+ spin_lock(&mdev->mbox_lock);
+ size = ALIGN(size, MBOX_MSG_ALIGN);
+ size_rsp = ALIGN(size_rsp, MBOX_MSG_ALIGN);
+ /* Check if there is space in mailbox */
+ if ((mdev->msg_size + size) > mbox->tx_size - msgs_offset)
+ goto exit;
+ if ((mdev->rsp_size + size_rsp) > mbox->rx_size - msgs_offset)
+ goto exit;
+
+ if (mdev->msg_size == 0)
+ mdev->num_msgs = 0;
+ mdev->num_msgs++;
+
+ msghdr = (struct mbox_msghdr *)(mdev->mbase + mbox->tx_start +
+ msgs_offset + mdev->msg_size);
+ /* Clear the whole msg region */
+ memset(msghdr, 0, sizeof(*msghdr) + size);
+ /* Init message header with reset values */
+ msghdr->ver = OTX2_MBOX_VERSION;
+ mdev->msg_size += size;
+ mdev->rsp_size += size_rsp;
+ msghdr->next_msgoff = mdev->msg_size + msgs_offset;
+exit:
+ spin_unlock(&mdev->mbox_lock);
+
+ return msghdr;
+}
+EXPORT_SYMBOL(otx2_mbox_alloc_msg_rsp);
+
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ unsigned long imsg = mbox->tx_start + msgs_offset;
+ unsigned long irsp = mbox->rx_start + msgs_offset;
+ u16 msgs;
+
+ if (mdev->num_msgs != mdev->msgs_acked)
+ return ERR_PTR(-ENODEV);
+
+ for (msgs = 0; msgs < mdev->msgs_acked; msgs++) {
+ struct mbox_msghdr *pmsg = mdev->mbase + imsg;
+ struct mbox_msghdr *prsp = mdev->mbase + irsp;
+
+ if (msg == pmsg) {
+ if (pmsg->id != prsp->id)
+ return ERR_PTR(-ENODEV);
+ return prsp;
+ }
+
+ imsg = pmsg->next_msgoff;
+ irsp = prsp->next_msgoff;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(otx2_mbox_get_rsp);
+
+int
+otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid, u16 pcifunc, u16 id)
+{
+ struct msg_rsp *rsp;
+
+ rsp = (struct msg_rsp *)
+ otx2_mbox_alloc_msg(mbox, devid, sizeof(*rsp));
+ if (!rsp)
+ return -ENOMEM;
+ rsp->hdr.id = id;
+ rsp->hdr.sig = OTX2_MBOX_RSP_SIG;
+ rsp->hdr.rc = MBOX_MSG_INVALID;
+ rsp->hdr.pcifunc = pcifunc;
+ return 0;
+}
+EXPORT_SYMBOL(otx2_reply_invalid_msg);
+
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ bool ret;
+
+ spin_lock(&mdev->mbox_lock);
+ ret = mdev->num_msgs != 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(otx2_mbox_nonempty);
+
+const char *otx2_mbox_id2name(u16 id)
+{
+ switch (id) {
+#define M(_name, _id, _1, _2) case _id: return # _name;
+ MBOX_MESSAGES
+#undef M
+ default:
+ return "INVALID ID";
+ }
+}
+EXPORT_SYMBOL(otx2_mbox_id2name);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/marvell/octeontx2/mbox.h b/drivers/soc/marvell/octeontx2/mbox.h
new file mode 100644
index 0000000..8e205fd
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2/mbox.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MBOX_H
+#define MBOX_H
+
+#include <linux/etherdevice.h>
+#include <linux/sizes.h>
+
+#include "rvu_struct.h"
+
+#define MBOX_SIZE SZ_64K
+
+/* AF/PF: PF initiated, PF/VF VF initiated */
+#define MBOX_DOWN_RX_START 0
+#define MBOX_DOWN_RX_SIZE (46 * SZ_1K)
+#define MBOX_DOWN_TX_START (MBOX_DOWN_RX_START + MBOX_DOWN_RX_SIZE)
+#define MBOX_DOWN_TX_SIZE (16 * SZ_1K)
+/* AF/PF: AF initiated, PF/VF PF initiated */
+#define MBOX_UP_RX_START (MBOX_DOWN_TX_START + MBOX_DOWN_TX_SIZE)
+#define MBOX_UP_RX_SIZE SZ_1K
+#define MBOX_UP_TX_START (MBOX_UP_RX_START + MBOX_UP_RX_SIZE)
+#define MBOX_UP_TX_SIZE SZ_1K
+
+#if MBOX_UP_TX_SIZE + MBOX_UP_TX_START != MBOX_SIZE
+# error "incorrect mailbox area sizes"
+#endif
+
+#define MBOX_RSP_TIMEOUT 1000 /* in ms, Time to wait for mbox response */
+
+#define MBOX_MSG_ALIGN 16 /* Align mbox msg start to 16bytes */
+
+/* Mailbox directions */
+#define MBOX_DIR_AFPF 0 /* AF replies to PF */
+#define MBOX_DIR_PFAF 1 /* PF sends messages to AF */
+#define MBOX_DIR_PFVF 2 /* PF replies to VF */
+#define MBOX_DIR_VFPF 3 /* VF sends messages to PF */
+#define MBOX_DIR_AFPF_UP 4 /* AF sends messages to PF */
+#define MBOX_DIR_PFAF_UP 5 /* PF replies to AF */
+#define MBOX_DIR_PFVF_UP 6 /* PF sends messages to VF */
+#define MBOX_DIR_VFPF_UP 7 /* VF replies to PF */
+
+struct otx2_mbox_dev {
+ void *mbase; /* This dev's mbox region */
+ spinlock_t mbox_lock;
+ u16 msg_size; /* Total msg size to be sent */
+ u16 rsp_size; /* Total rsp size to be sure the reply is ok */
+ u16 num_msgs; /* No of msgs sent or waiting for response */
+ u16 msgs_acked; /* No of msgs for which response is received */
+};
+
+struct otx2_mbox {
+ struct pci_dev *pdev;
+ void *hwbase; /* Mbox region advertised by HW */
+ void *reg_base;/* CSR base for this dev */
+ u64 trigger; /* Trigger mbox notification */
+ u16 tr_shift; /* Mbox trigger shift */
+ u64 rx_start; /* Offset of Rx region in mbox memory */
+ u64 tx_start; /* Offset of Tx region in mbox memory */
+ u16 rx_size; /* Size of Rx region */
+ u16 tx_size; /* Size of Tx region */
+ u16 ndevs; /* The number of peers */
+ struct otx2_mbox_dev *dev;
+};
+
+/* Header which preceeds all mbox messages */
+struct mbox_hdr {
+ u16 num_msgs; /* No of msgs embedded */
+};
+
+/* Header which preceeds every msg and is also part of it */
+struct mbox_msghdr {
+ u16 pcifunc; /* Who's sending this msg */
+ u16 id; /* Mbox message ID */
+#define OTX2_MBOX_REQ_SIG (0xdead)
+#define OTX2_MBOX_RSP_SIG (0xbeef)
+ u16 sig; /* Signature, for validating corrupted msgs */
+#define OTX2_MBOX_VERSION (0x0001)
+ u16 ver; /* Version of msg's structure for this ID */
+ u16 next_msgoff; /* Offset of next msg within mailbox region */
+ int rc; /* Msg process'ed response code */
+};
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid);
+void otx2_mbox_destroy(struct otx2_mbox *mbox);
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs);
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid);
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp);
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg);
+int otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid,
+ u16 pcifunc, u16 id);
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid);
+const char *otx2_mbox_id2name(u16 id);
+static inline struct mbox_msghdr *otx2_mbox_alloc_msg(struct otx2_mbox *mbox,
+ int devid, int size)
+{
+ return otx2_mbox_alloc_msg_rsp(mbox, devid, size, 0);
+}
+
+/* Mailbox message types */
+#define MBOX_MSG_MASK 0xFFFF
+#define MBOX_MSG_INVALID 0xFFFE
+#define MBOX_MSG_MAX 0xFFFF
+
+#define MBOX_MESSAGES \
+M(READY, 0x001, msg_req, msg_rsp)
+
+enum {
+#define M(_name, _id, _1, _2) MBOX_MSG_ ## _name = _id,
+MBOX_MESSAGES
+#undef M
+};
+
+/* Mailbox message formats */
+
+/* Generic request msg used for those mbox messages which
+ * don't send any data in the request.
+ */
+struct msg_req {
+ struct mbox_msghdr hdr;
+};
+
+/* Generic rsponse msg used a ack or response for those mbox
+ * messages which doesn't have a specific rsp msg format.
+ */
+struct msg_rsp {
+ struct mbox_msghdr hdr;
+};
+
+#endif /* MBOX_H */
diff --git a/drivers/soc/marvell/octeontx2/rvu_reg.h b/drivers/soc/marvell/octeontx2/rvu_reg.h
index a7995d1..3bfb1e0 100644
--- a/drivers/soc/marvell/octeontx2/rvu_reg.h
+++ b/drivers/soc/marvell/octeontx2/rvu_reg.h
@@ -101,6 +101,10 @@
#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+/* RVU VF registers */
+#define RVU_VF_VFPF_MBOX0 (0x00000)
+#define RVU_VF_VFPF_MBOX1 (0x00008)
+
/* NPA block's admin function registers */
#define NPA_AF_BLK_RST (0x0000)
#define NPA_AF_CONST (0x0010)
--
2.7.4
next prev parent reply other threads:[~2018-09-04 11:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 11:54 [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 01/15] soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 02/15] soc: octeontx2: Reset all RVU blocks sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 03/15] soc: octeontx2: Gather RVU blocks HW info sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` sunil.kovvuri [this message]
2018-09-04 11:54 ` [PATCH v2 04/15] soc: octeontx2: Add mailbox support infra sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 05/15] soc: octeontx2: Add mailbox IRQ and msg handlers sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 06/15] soc: octeontx2: Convert mbox msg id check to a macro sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 07/15] soc: octeontx2: Scan blocks for LFs provisioned to PF/VF sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 08/15] soc: octeontx2: Add RVU block LF provisioning support sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 09/15] soc: octeontx2: Configure block LF's MSIX vector offset sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 10/15] soc: octeontx2: Reconfig MSIX base with IOVA sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 12/15] soc: octeontx2: Set RVU PFs to CGX LMACs mapping sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 13/15] soc: octeontx2: Add support for CGX link management sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 14/15] soc: octeontx2: Register for CGX lmac events sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 11:54 ` [PATCH v2 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver sunil.kovvuri
2018-09-04 11:54 ` sunil.kovvuri at gmail.com
2018-09-04 12:46 ` [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver Andrew Lunn
2018-09-04 12:46 ` Andrew Lunn
2018-09-04 16:14 ` Sunil Kovvuri
2018-09-04 16:14 ` Sunil Kovvuri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536062090-30446-5-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=amakarov@marvell.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=lbartosik@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.