[PATCH v6 00/14] SMP cleanup and new features

[PATCH v6 00/14] SMP cleanup and new features

[Atish Patra]

This patch series now has evolved to contain several related changes.

1. Updated the assorted cleanup series by palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html

2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.

3. Included Anup's cleanup and IPI stat patch.

All the patch series have been combined to avoid conflicts as a lot
of common code is changed different patch sets. I have mostly addressed
review comments and fixed checkpatch errors from palmer's and anup's series.

v1->v2:

1. Dropped cpu_ops patch.
2. Moved back IRQ cause definitions to irq.h
3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
4. Renamed CPU id and hart id correctly.

v2-v3:

1. Added cleanup patches from palmer.
2. Moved the hotplug related functions to it's own file.
3. Updated stub functions as per coding guidelines.
4. Renamed __cpu_logical_map to a more coherent name.

v3-v4:

1. Addressed minor typos in commit text and code.
2. Included Anup's do_IRQ patch.
3. Dropped CPU hotplug patch. As there are some concerns
   about approach, I will submit it separately.

v4->v5:

1. Minor typo fixes in commit text.

v5->v6:
1. Included Anup's IPI stat and cpuinfo patch.
2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map 


Anup Patel (3):
  RISC-V: No need to pass scause as arg to do_IRQ()
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Show IPI stats

Atish Patra (4):
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use Linux logical CPU number instead of hartid

Palmer Dabbelt (7):
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Use mmgrab()

 arch/riscv/include/asm/processor.h |  2 +-
 arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
 arch/riscv/include/asm/tlbflush.h  | 16 +++++--
 arch/riscv/kernel/cacheinfo.c      |  7 ---
 arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
 arch/riscv/kernel/entry.S          |  1 -
 arch/riscv/kernel/head.S           |  4 +-
 arch/riscv/kernel/irq.c            | 12 +++++-
 arch/riscv/kernel/setup.c          | 10 +++++
 arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
 arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
 drivers/clocksource/riscv_timer.c  | 12 ++++--
 drivers/irqchip/irq-sifive-plic.c  | 10 +++--
 13 files changed, 259 insertions(+), 77 deletions(-)

-- 
2.7.4

[PATCH v6 00/14] SMP cleanup and new features

[Atish Patra]

This patch series now has evolved to contain several related changes.

1. Updated the assorted cleanup series by palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html

2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.

3. Included Anup's cleanup and IPI stat patch.

All the patch series have been combined to avoid conflicts as a lot
of common code is changed different patch sets. I have mostly addressed
review comments and fixed checkpatch errors from palmer's and anup's series.

v1->v2:

1. Dropped cpu_ops patch.
2. Moved back IRQ cause definitions to irq.h
3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
4. Renamed CPU id and hart id correctly.

v2-v3:

1. Added cleanup patches from palmer.
2. Moved the hotplug related functions to it's own file.
3. Updated stub functions as per coding guidelines.
4. Renamed __cpu_logical_map to a more coherent name.

v3-v4:

1. Addressed minor typos in commit text and code.
2. Included Anup's do_IRQ patch.
3. Dropped CPU hotplug patch. As there are some concerns
   about approach, I will submit it separately.

v4->v5:

1. Minor typo fixes in commit text.

v5->v6:
1. Included Anup's IPI stat and cpuinfo patch.
2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map 


Anup Patel (3):
  RISC-V: No need to pass scause as arg to do_IRQ()
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Show IPI stats

Atish Patra (4):
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use Linux logical CPU number instead of hartid

Palmer Dabbelt (7):
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Use mmgrab()

 arch/riscv/include/asm/processor.h |  2 +-
 arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
 arch/riscv/include/asm/tlbflush.h  | 16 +++++--
 arch/riscv/kernel/cacheinfo.c      |  7 ---
 arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
 arch/riscv/kernel/entry.S          |  1 -
 arch/riscv/kernel/head.S           |  4 +-
 arch/riscv/kernel/irq.c            | 12 +++++-
 arch/riscv/kernel/setup.c          | 10 +++++
 arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
 arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
 drivers/clocksource/riscv_timer.c  | 12 ++++--
 drivers/irqchip/irq-sifive-plic.c  | 10 +++--
 13 files changed, 259 insertions(+), 77 deletions(-)

-- 
2.7.4

[PATCH v6 00/14] SMP cleanup and new features

[Atish Patra]

This patch series now has evolved to contain several related changes.

1. Updated the assorted cleanup series by palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html

2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.

3. Included Anup's cleanup and IPI stat patch.

All the patch series have been combined to avoid conflicts as a lot
of common code is changed different patch sets. I have mostly addressed
review comments and fixed checkpatch errors from palmer's and anup's series.

v1->v2:

1. Dropped cpu_ops patch.
2. Moved back IRQ cause definitions to irq.h
3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
4. Renamed CPU id and hart id correctly.

v2-v3:

1. Added cleanup patches from palmer.
2. Moved the hotplug related functions to it's own file.
3. Updated stub functions as per coding guidelines.
4. Renamed __cpu_logical_map to a more coherent name.

v3-v4:

1. Addressed minor typos in commit text and code.
2. Included Anup's do_IRQ patch.
3. Dropped CPU hotplug patch. As there are some concerns
   about approach, I will submit it separately.

v4->v5:

1. Minor typo fixes in commit text.

v5->v6:
1. Included Anup's IPI stat and cpuinfo patch.
2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map 


Anup Patel (3):
  RISC-V: No need to pass scause as arg to do_IRQ()
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Show IPI stats

Atish Patra (4):
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use Linux logical CPU number instead of hartid

Palmer Dabbelt (7):
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Use mmgrab()

 arch/riscv/include/asm/processor.h |  2 +-
 arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
 arch/riscv/include/asm/tlbflush.h  | 16 +++++--
 arch/riscv/kernel/cacheinfo.c      |  7 ---
 arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
 arch/riscv/kernel/entry.S          |  1 -
 arch/riscv/kernel/head.S           |  4 +-
 arch/riscv/kernel/irq.c            | 12 +++++-
 arch/riscv/kernel/setup.c          | 10 +++++
 arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
 arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
 drivers/clocksource/riscv_timer.c  | 12 ++++--
 drivers/irqchip/irq-sifive-plic.c  | 10 +++--
 13 files changed, 259 insertions(+), 77 deletions(-)

-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 01/14] RISC-V: No need to pass scause as arg to do_IRQ()

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/kernel/entry.S | 1 -
 arch/riscv/kernel/irq.c   | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index fa2c08e3..6eaacfa5 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -168,7 +168,6 @@ ENTRY(handle_exception)
 
 	/* Handle interrupts */
 	move a0, sp /* pt_regs */
-	move a1, s4 /* scause */
 	tail do_IRQ
 1:
 	/* Exceptions run with interrupts enabled */
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 0cfac48a..ca459331 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -24,12 +24,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
-asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs, unsigned long cause)
+asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	irq_enter();
-	switch (cause & ~INTERRUPT_CAUSE_FLAG) {
+	switch (regs->scause & ~INTERRUPT_CAUSE_FLAG) {
 	case INTERRUPT_CAUSE_TIMER:
 		riscv_timer_interrupt();
 		break;
-- 
2.7.4

[PATCH v6 01/14] RISC-V: No need to pass scause as arg to do_IRQ()

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/kernel/entry.S | 1 -
 arch/riscv/kernel/irq.c   | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index fa2c08e3..6eaacfa5 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -168,7 +168,6 @@ ENTRY(handle_exception)
 
 	/* Handle interrupts */
 	move a0, sp /* pt_regs */
-	move a1, s4 /* scause */
 	tail do_IRQ
 1:
 	/* Exceptions run with interrupts enabled */
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 0cfac48a..ca459331 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -24,12 +24,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
-asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs, unsigned long cause)
+asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	irq_enter();
-	switch (cause & ~INTERRUPT_CAUSE_FLAG) {
+	switch (regs->scause & ~INTERRUPT_CAUSE_FLAG) {
 	case INTERRUPT_CAUSE_TIMER:
 		riscv_timer_interrupt();
 		break;
-- 
2.7.4

[PATCH v6 01/14] RISC-V: No need to pass scause as arg to do_IRQ()

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/kernel/entry.S | 1 -
 arch/riscv/kernel/irq.c   | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index fa2c08e3..6eaacfa5 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -168,7 +168,6 @@ ENTRY(handle_exception)
 
 	/* Handle interrupts */
 	move a0, sp /* pt_regs */
-	move a1, s4 /* scause */
 	tail do_IRQ
 1:
 	/* Exceptions run with interrupts enabled */
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 0cfac48a..ca459331 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -24,12 +24,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
-asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs, unsigned long cause)
+asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	irq_enter();
-	switch (cause & ~INTERRUPT_CAUSE_FLAG) {
+	switch (regs->scause & ~INTERRUPT_CAUSE_FLAG) {
 	case INTERRUPT_CAUSE_TIMER:
 		riscv_timer_interrupt();
 		break;
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 02/14] RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/riscv/kernel/cacheinfo.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 0bc86e5f..cb35ffd8 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -22,13 +22,6 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 {
 	this_leaf->level = level;
 	this_leaf->type = type;
-	/* not a sector cache */
-	this_leaf->physical_line_partition = 1;
-	/* TODO: Add to DTS */
-	this_leaf->attributes =
-		CACHE_WRITE_BACK
-		| CACHE_READ_ALLOCATE
-		| CACHE_WRITE_ALLOCATE;
 }
 
 static int __init_cache_level(unsigned int cpu)
-- 
2.7.4

[PATCH v6 02/14] RISC-V: Don't set cacheinfo.{physical_line_partition, attributes}

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/riscv/kernel/cacheinfo.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 0bc86e5f..cb35ffd8 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -22,13 +22,6 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 {
 	this_leaf->level = level;
 	this_leaf->type = type;
-	/* not a sector cache */
-	this_leaf->physical_line_partition = 1;
-	/* TODO: Add to DTS */
-	this_leaf->attributes =
-		CACHE_WRITE_BACK
-		| CACHE_READ_ALLOCATE
-		| CACHE_WRITE_ALLOCATE;
 }
 
 static int __init_cache_level(unsigned int cpu)
-- 
2.7.4

[PATCH v6 02/14] RISC-V: Don't set cacheinfo.{physical_line_partition, attributes}

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

These are just hard coded in the RISC-V port, which doesn't make any
sense.  We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/riscv/kernel/cacheinfo.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 0bc86e5f..cb35ffd8 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -22,13 +22,6 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 {
 	this_leaf->level = level;
 	this_leaf->type = type;
-	/* not a sector cache */
-	this_leaf->physical_line_partition = 1;
-	/* TODO: Add to DTS */
-	this_leaf->attributes =
-		CACHE_WRITE_BACK
-		| CACHE_READ_ALLOCATE
-		| CACHE_WRITE_ALLOCATE;
 }
 
 static int __init_cache_level(unsigned int cpu)
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 03/14] RISC-V: Filter ISA and MMU values in cpuinfo

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/cpu.c | 68 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 61 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index ca6c81e5..1c0bf662 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -58,6 +58,63 @@ int riscv_of_processor_hart(struct device_node *node)
 
 #ifdef CONFIG_PROC_FS
 
+static void print_isa(struct seq_file *f, const char *orig_isa)
+{
+	static const char *ext = "mafdc";
+	const char *isa = orig_isa;
+	const char *e;
+
+	/*
+	 * Linux doesn't support rv32e or rv128i, and we only support booting
+	 * kernels on harts with the same ISA that the kernel is compiled for.
+	 */
+#if defined(CONFIG_32BIT)
+	if (strncmp(isa, "rv32i", 5) != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strncmp(isa, "rv64i", 5) != 0)
+		return;
+#endif
+
+	/* Print the base ISA, as we already know it's legal. */
+	seq_puts(f, "isa\t: ");
+	seq_write(f, isa, 5);
+	isa += 5;
+
+	/*
+	 * Check the rest of the ISA string for valid extensions, printing those
+	 * we find.  RISC-V ISA strings define an order, so we only print the
+	 * extension bits when they're in order.
+	 */
+	for (e = ext; *e != '\0'; ++e) {
+		if (isa[0] == e[0]) {
+			seq_write(f, isa, 1);
+			isa++;
+		}
+	}
+
+	/*
+	 * If we were given an unsupported ISA in the device tree then print
+	 * a bit of info describing what went wrong.
+	 */
+	if (isa[0] != '\0')
+		pr_info("unsupported ISA \"%s\" in device tree", orig_isa);
+}
+
+static void print_mmu(struct seq_file *f, const char *mmu_type)
+{
+#if defined(CONFIG_32BIT)
+	if (strcmp(mmu_type, "riscv,sv32") != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strcmp(mmu_type, "riscv,sv39") != 0 &&
+	    strcmp(mmu_type, "riscv,sv48") != 0)
+		return;
+#endif
+
+	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+}
+
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	*pos = cpumask_next(*pos - 1, cpu_online_mask);
@@ -83,13 +140,10 @@ static int c_show(struct seq_file *m, void *v)
 	const char *compat, *isa, *mmu;
 
 	seq_printf(m, "hart\t: %lu\n", hart_id);
-	if (!of_property_read_string(node, "riscv,isa", &isa)
-	    && isa[0] == 'r'
-	    && isa[1] == 'v')
-		seq_printf(m, "isa\t: %s\n", isa);
-	if (!of_property_read_string(node, "mmu-type", &mmu)
-	    && !strncmp(mmu, "riscv,", 6))
-		seq_printf(m, "mmu\t: %s\n", mmu+6);
+	if (!of_property_read_string(node, "riscv,isa", &isa))
+		print_isa(m, isa);
+	if (!of_property_read_string(node, "mmu-type", &mmu))
+		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
 		seq_printf(m, "uarch\t: %s\n", compat);
-- 
2.7.4

[PATCH v6 03/14] RISC-V: Filter ISA and MMU values in cpuinfo

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/cpu.c | 68 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 61 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index ca6c81e5..1c0bf662 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -58,6 +58,63 @@ int riscv_of_processor_hart(struct device_node *node)
 
 #ifdef CONFIG_PROC_FS
 
+static void print_isa(struct seq_file *f, const char *orig_isa)
+{
+	static const char *ext = "mafdc";
+	const char *isa = orig_isa;
+	const char *e;
+
+	/*
+	 * Linux doesn't support rv32e or rv128i, and we only support booting
+	 * kernels on harts with the same ISA that the kernel is compiled for.
+	 */
+#if defined(CONFIG_32BIT)
+	if (strncmp(isa, "rv32i", 5) != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strncmp(isa, "rv64i", 5) != 0)
+		return;
+#endif
+
+	/* Print the base ISA, as we already know it's legal. */
+	seq_puts(f, "isa\t: ");
+	seq_write(f, isa, 5);
+	isa += 5;
+
+	/*
+	 * Check the rest of the ISA string for valid extensions, printing those
+	 * we find.  RISC-V ISA strings define an order, so we only print the
+	 * extension bits when they're in order.
+	 */
+	for (e = ext; *e != '\0'; ++e) {
+		if (isa[0] == e[0]) {
+			seq_write(f, isa, 1);
+			isa++;
+		}
+	}
+
+	/*
+	 * If we were given an unsupported ISA in the device tree then print
+	 * a bit of info describing what went wrong.
+	 */
+	if (isa[0] != '\0')
+		pr_info("unsupported ISA \"%s\" in device tree", orig_isa);
+}
+
+static void print_mmu(struct seq_file *f, const char *mmu_type)
+{
+#if defined(CONFIG_32BIT)
+	if (strcmp(mmu_type, "riscv,sv32") != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strcmp(mmu_type, "riscv,sv39") != 0 &&
+	    strcmp(mmu_type, "riscv,sv48") != 0)
+		return;
+#endif
+
+	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+}
+
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	*pos = cpumask_next(*pos - 1, cpu_online_mask);
@@ -83,13 +140,10 @@ static int c_show(struct seq_file *m, void *v)
 	const char *compat, *isa, *mmu;
 
 	seq_printf(m, "hart\t: %lu\n", hart_id);
-	if (!of_property_read_string(node, "riscv,isa", &isa)
-	    && isa[0] == 'r'
-	    && isa[1] == 'v')
-		seq_printf(m, "isa\t: %s\n", isa);
-	if (!of_property_read_string(node, "mmu-type", &mmu)
-	    && !strncmp(mmu, "riscv,", 6))
-		seq_printf(m, "mmu\t: %s\n", mmu+6);
+	if (!of_property_read_string(node, "riscv,isa", &isa))
+		print_isa(m, isa);
+	if (!of_property_read_string(node, "mmu-type", &mmu))
+		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
 		seq_printf(m, "uarch\t: %s\n", compat);
-- 
2.7.4

[PATCH v6 03/14] RISC-V: Filter ISA and MMU values in cpuinfo

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/cpu.c | 68 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 61 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index ca6c81e5..1c0bf662 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -58,6 +58,63 @@ int riscv_of_processor_hart(struct device_node *node)
 
 #ifdef CONFIG_PROC_FS
 
+static void print_isa(struct seq_file *f, const char *orig_isa)
+{
+	static const char *ext = "mafdc";
+	const char *isa = orig_isa;
+	const char *e;
+
+	/*
+	 * Linux doesn't support rv32e or rv128i, and we only support booting
+	 * kernels on harts with the same ISA that the kernel is compiled for.
+	 */
+#if defined(CONFIG_32BIT)
+	if (strncmp(isa, "rv32i", 5) != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strncmp(isa, "rv64i", 5) != 0)
+		return;
+#endif
+
+	/* Print the base ISA, as we already know it's legal. */
+	seq_puts(f, "isa\t: ");
+	seq_write(f, isa, 5);
+	isa += 5;
+
+	/*
+	 * Check the rest of the ISA string for valid extensions, printing those
+	 * we find.  RISC-V ISA strings define an order, so we only print the
+	 * extension bits when they're in order.
+	 */
+	for (e = ext; *e != '\0'; ++e) {
+		if (isa[0] == e[0]) {
+			seq_write(f, isa, 1);
+			isa++;
+		}
+	}
+
+	/*
+	 * If we were given an unsupported ISA in the device tree then print
+	 * a bit of info describing what went wrong.
+	 */
+	if (isa[0] != '\0')
+		pr_info("unsupported ISA \"%s\" in device tree", orig_isa);
+}
+
+static void print_mmu(struct seq_file *f, const char *mmu_type)
+{
+#if defined(CONFIG_32BIT)
+	if (strcmp(mmu_type, "riscv,sv32") != 0)
+		return;
+#elif defined(CONFIG_64BIT)
+	if (strcmp(mmu_type, "riscv,sv39") != 0 &&
+	    strcmp(mmu_type, "riscv,sv48") != 0)
+		return;
+#endif
+
+	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+}
+
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	*pos = cpumask_next(*pos - 1, cpu_online_mask);
@@ -83,13 +140,10 @@ static int c_show(struct seq_file *m, void *v)
 	const char *compat, *isa, *mmu;
 
 	seq_printf(m, "hart\t: %lu\n", hart_id);
-	if (!of_property_read_string(node, "riscv,isa", &isa)
-	    && isa[0] == 'r'
-	    && isa[1] == 'v')
-		seq_printf(m, "isa\t: %s\n", isa);
-	if (!of_property_read_string(node, "mmu-type", &mmu)
-	    && !strncmp(mmu, "riscv,", 6))
-		seq_printf(m, "mmu\t: %s\n", mmu+6);
+	if (!of_property_read_string(node, "riscv,isa", &isa))
+		print_isa(m, isa);
+	if (!of_property_read_string(node, "mmu-type", &mmu))
+		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
 		seq_printf(m, "uarch\t: %s\n", compat);
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 04/14] RISC-V: Comment on the TLB flush in smp_callin()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

This isn't readily apparent from reading the code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 56abab6a..712e9ca8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -106,6 +106,10 @@ asmlinkage void __init smp_callin(void)
 	trap_init();
 	notify_cpu_starting(smp_processor_id());
 	set_cpu_online(smp_processor_id(), 1);
+	/*
+	 * Remote TLB flushes are ignored while the CPU is offline, so emit
+	 * a local TLB flush right now just in case.
+	 */
 	local_flush_tlb_all();
 	local_irq_enable();
 	preempt_disable();
-- 
2.7.4

[PATCH v6 04/14] RISC-V: Comment on the TLB flush in smp_callin()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

This isn't readily apparent from reading the code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 56abab6a..712e9ca8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -106,6 +106,10 @@ asmlinkage void __init smp_callin(void)
 	trap_init();
 	notify_cpu_starting(smp_processor_id());
 	set_cpu_online(smp_processor_id(), 1);
+	/*
+	 * Remote TLB flushes are ignored while the CPU is offline, so emit
+	 * a local TLB flush right now just in case.
+	 */
 	local_flush_tlb_all();
 	local_irq_enable();
 	preempt_disable();
-- 
2.7.4

[PATCH v6 04/14] RISC-V: Comment on the TLB flush in smp_callin()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

This isn't readily apparent from reading the code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 56abab6a..712e9ca8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -106,6 +106,10 @@ asmlinkage void __init smp_callin(void)
 	trap_init();
 	notify_cpu_starting(smp_processor_id());
 	set_cpu_online(smp_processor_id(), 1);
+	/*
+	 * Remote TLB flushes are ignored while the CPU is offline, so emit
+	 * a local TLB flush right now just in case.
+	 */
 	local_flush_tlb_all();
 	local_irq_enable();
 	preempt_disable();
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 05/14] RISC-V: Disable preemption before enabling interrupts

[Atish Patra]

Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 712e9ca8..670749ec 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -111,7 +111,11 @@ asmlinkage void __init smp_callin(void)
 	 * a local TLB flush right now just in case.
 	 */
 	local_flush_tlb_all();
-	local_irq_enable();
+	/*
+	 * Disable preemption before enabling interrupts, so we don't try to
+	 * schedule a CPU that hasn't actually started yet.
+	 */
 	preempt_disable();
+	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
-- 
2.7.4

[PATCH v6 05/14] RISC-V: Disable preemption before enabling interrupts

[Atish Patra]

Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 712e9ca8..670749ec 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -111,7 +111,11 @@ asmlinkage void __init smp_callin(void)
 	 * a local TLB flush right now just in case.
 	 */
 	local_flush_tlb_all();
-	local_irq_enable();
+	/*
+	 * Disable preemption before enabling interrupts, so we don't try to
+	 * schedule a CPU that hasn't actually started yet.
+	 */
 	preempt_disable();
+	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
-- 
2.7.4

[PATCH v6 05/14] RISC-V: Disable preemption before enabling interrupts

[Atish Patra]

Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 712e9ca8..670749ec 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -111,7 +111,11 @@ asmlinkage void __init smp_callin(void)
 	 * a local TLB flush right now just in case.
 	 */
 	local_flush_tlb_all();
-	local_irq_enable();
+	/*
+	 * Disable preemption before enabling interrupts, so we don't try to
+	 * schedule a CPU that hasn't actually started yet.
+	 */
 	preempt_disable();
+	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 06/14] RISC-V: Provide a cleaner raw_smp_processor_id()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

I'm not sure how I managed to miss this the first time, but this is much
better.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting and other fixes]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 36016845..85d7619e 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -14,13 +14,9 @@
 #ifndef _ASM_RISCV_SMP_H
 #define _ASM_RISCV_SMP_H
 
-/* This both needs asm-offsets.h and is used when generating it. */
-#ifndef GENERATING_ASM_OFFSETS
-#include <asm/asm-offsets.h>
-#endif
-
 #include <linux/cpumask.h>
 #include <linux/irqreturn.h>
+#include <linux/thread_info.h>
 
 #ifdef CONFIG_SMP
 
@@ -34,12 +30,10 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 void arch_send_call_function_single_ipi(int cpu);
 
 /*
- * This is particularly ugly: it appears we can't actually get the definition
- * of task_struct here, but we need access to the CPU this task is running on.
- * Instead of using C we're using asm-offsets.h to get the current processor
- * ID.
+ * Obtains the hart ID of the currently executing task.  This relies on
+ * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
-#define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
+#define raw_smp_processor_id() (current_thread_info()->cpu)
 
 #endif /* CONFIG_SMP */
 
-- 
2.7.4

[PATCH v6 06/14] RISC-V: Provide a cleaner raw_smp_processor_id()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

I'm not sure how I managed to miss this the first time, but this is much
better.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting and other fixes]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 36016845..85d7619e 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -14,13 +14,9 @@
 #ifndef _ASM_RISCV_SMP_H
 #define _ASM_RISCV_SMP_H
 
-/* This both needs asm-offsets.h and is used when generating it. */
-#ifndef GENERATING_ASM_OFFSETS
-#include <asm/asm-offsets.h>
-#endif
-
 #include <linux/cpumask.h>
 #include <linux/irqreturn.h>
+#include <linux/thread_info.h>
 
 #ifdef CONFIG_SMP
 
@@ -34,12 +30,10 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 void arch_send_call_function_single_ipi(int cpu);
 
 /*
- * This is particularly ugly: it appears we can't actually get the definition
- * of task_struct here, but we need access to the CPU this task is running on.
- * Instead of using C we're using asm-offsets.h to get the current processor
- * ID.
+ * Obtains the hart ID of the currently executing task.  This relies on
+ * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
-#define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
+#define raw_smp_processor_id() (current_thread_info()->cpu)
 
 #endif /* CONFIG_SMP */
 
-- 
2.7.4

[PATCH v6 06/14] RISC-V: Provide a cleaner raw_smp_processor_id()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

I'm not sure how I managed to miss this the first time, but this is much
better.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting and other fixes]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 36016845..85d7619e 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -14,13 +14,9 @@
 #ifndef _ASM_RISCV_SMP_H
 #define _ASM_RISCV_SMP_H
 
-/* This both needs asm-offsets.h and is used when generating it. */
-#ifndef GENERATING_ASM_OFFSETS
-#include <asm/asm-offsets.h>
-#endif
-
 #include <linux/cpumask.h>
 #include <linux/irqreturn.h>
+#include <linux/thread_info.h>
 
 #ifdef CONFIG_SMP
 
@@ -34,12 +30,10 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 void arch_send_call_function_single_ipi(int cpu);
 
 /*
- * This is particularly ugly: it appears we can't actually get the definition
- * of task_struct here, but we need access to the CPU this task is running on.
- * Instead of using C we're using asm-offsets.h to get the current processor
- * ID.
+ * Obtains the hart ID of the currently executing task.  This relies on
+ * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
-#define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
+#define raw_smp_processor_id() (current_thread_info()->cpu)
 
 #endif /* CONFIG_SMP */
 
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 07/14] RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes.  I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/processor.h | 2 +-
 arch/riscv/kernel/cpu.c            | 7 +++++--
 arch/riscv/kernel/smpboot.c        | 2 +-
 drivers/clocksource/riscv_timer.c  | 2 +-
 drivers/irqchip/irq-sifive-plic.c  | 2 +-
 5 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 3fe4af81..50de774d 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -88,7 +88,7 @@ static inline void wait_for_interrupt(void)
 }
 
 struct device_node;
-extern int riscv_of_processor_hart(struct device_node *node);
+int riscv_of_processor_hartid(struct device_node *node);
 
 extern void riscv_fill_hwcap(void);
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 1c0bf662..4723e235 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -15,8 +15,11 @@
 #include <linux/seq_file.h>
 #include <linux/of.h>
 
-/* Return -1 if not a valid hart */
-int riscv_of_processor_hart(struct device_node *node)
+/*
+ * Returns the hart ID of the given device tree node, or -1 if the device tree
+ * node isn't a RISC-V hart.
+ */
+int riscv_of_processor_hartid(struct device_node *node)
 {
 	const char *isa, *status;
 	u32 hart;
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 670749ec..cfb0b02d 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,7 +53,7 @@ void __init setup_smp(void)
 	int hart, im_okay_therefore_i_am = 0;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
-		hart = riscv_of_processor_hart(dn);
+		hart = riscv_of_processor_hartid(dn);
 		if (hart >= 0) {
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index 4e8b347e..ad7453fc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -84,7 +84,7 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hart(n), error;
+	int cpu_id = riscv_of_processor_hartid(n), error;
 	struct clocksource *cs;
 
 	if (cpu_id != smp_processor_id())
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 532e9d68..c55eaa31 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -176,7 +176,7 @@ static int plic_find_hart_id(struct device_node *node)
 {
 	for (; node; node = node->parent) {
 		if (of_device_is_compatible(node, "riscv"))
-			return riscv_of_processor_hart(node);
+			return riscv_of_processor_hartid(node);
 	}
 
 	return -1;
-- 
2.7.4

[PATCH v6 07/14] RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes.  I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/processor.h | 2 +-
 arch/riscv/kernel/cpu.c            | 7 +++++--
 arch/riscv/kernel/smpboot.c        | 2 +-
 drivers/clocksource/riscv_timer.c  | 2 +-
 drivers/irqchip/irq-sifive-plic.c  | 2 +-
 5 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 3fe4af81..50de774d 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -88,7 +88,7 @@ static inline void wait_for_interrupt(void)
 }
 
 struct device_node;
-extern int riscv_of_processor_hart(struct device_node *node);
+int riscv_of_processor_hartid(struct device_node *node);
 
 extern void riscv_fill_hwcap(void);
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 1c0bf662..4723e235 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -15,8 +15,11 @@
 #include <linux/seq_file.h>
 #include <linux/of.h>
 
-/* Return -1 if not a valid hart */
-int riscv_of_processor_hart(struct device_node *node)
+/*
+ * Returns the hart ID of the given device tree node, or -1 if the device tree
+ * node isn't a RISC-V hart.
+ */
+int riscv_of_processor_hartid(struct device_node *node)
 {
 	const char *isa, *status;
 	u32 hart;
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 670749ec..cfb0b02d 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,7 +53,7 @@ void __init setup_smp(void)
 	int hart, im_okay_therefore_i_am = 0;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
-		hart = riscv_of_processor_hart(dn);
+		hart = riscv_of_processor_hartid(dn);
 		if (hart >= 0) {
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index 4e8b347e..ad7453fc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -84,7 +84,7 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hart(n), error;
+	int cpu_id = riscv_of_processor_hartid(n), error;
 	struct clocksource *cs;
 
 	if (cpu_id != smp_processor_id())
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 532e9d68..c55eaa31 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -176,7 +176,7 @@ static int plic_find_hart_id(struct device_node *node)
 {
 	for (; node; node = node->parent) {
 		if (of_device_is_compatible(node, "riscv"))
-			return riscv_of_processor_hart(node);
+			return riscv_of_processor_hartid(node);
 	}
 
 	return -1;
-- 
2.7.4

[PATCH v6 07/14] RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes.  I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/processor.h | 2 +-
 arch/riscv/kernel/cpu.c            | 7 +++++--
 arch/riscv/kernel/smpboot.c        | 2 +-
 drivers/clocksource/riscv_timer.c  | 2 +-
 drivers/irqchip/irq-sifive-plic.c  | 2 +-
 5 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 3fe4af81..50de774d 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -88,7 +88,7 @@ static inline void wait_for_interrupt(void)
 }
 
 struct device_node;
-extern int riscv_of_processor_hart(struct device_node *node);
+int riscv_of_processor_hartid(struct device_node *node);
 
 extern void riscv_fill_hwcap(void);
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 1c0bf662..4723e235 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -15,8 +15,11 @@
 #include <linux/seq_file.h>
 #include <linux/of.h>
 
-/* Return -1 if not a valid hart */
-int riscv_of_processor_hart(struct device_node *node)
+/*
+ * Returns the hart ID of the given device tree node, or -1 if the device tree
+ * node isn't a RISC-V hart.
+ */
+int riscv_of_processor_hartid(struct device_node *node)
 {
 	const char *isa, *status;
 	u32 hart;
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 670749ec..cfb0b02d 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,7 +53,7 @@ void __init setup_smp(void)
 	int hart, im_okay_therefore_i_am = 0;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
-		hart = riscv_of_processor_hart(dn);
+		hart = riscv_of_processor_hartid(dn);
 		if (hart >= 0) {
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index 4e8b347e..ad7453fc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -84,7 +84,7 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hart(n), error;
+	int cpu_id = riscv_of_processor_hartid(n), error;
 	struct clocksource *cs;
 
 	if (cpu_id != smp_processor_id())
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 532e9d68..c55eaa31 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -176,7 +176,7 @@ static int plic_find_hart_id(struct device_node *node)
 {
 	for (; node; node = node->parent) {
 		if (of_device_is_compatible(node, "riscv"))
-			return riscv_of_processor_hart(node);
+			return riscv_of_processor_hartid(node);
 	}
 
 	return -1;
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 08/14] RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

The old name was a bit odd.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index cfb0b02d..4a232600 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -50,7 +50,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 void __init setup_smp(void)
 {
 	struct device_node *dn = NULL;
-	int hart, im_okay_therefore_i_am = 0;
+	int hart;
+	bool found_boot_cpu = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
@@ -58,13 +59,13 @@ void __init setup_smp(void)
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
 			if (hart == smp_processor_id()) {
-				BUG_ON(im_okay_therefore_i_am);
-				im_okay_therefore_i_am = 1;
+				BUG_ON(found_boot_cpu);
+				found_boot_cpu = true;
 			}
 		}
 	}
 
-	BUG_ON(!im_okay_therefore_i_am);
+	BUG_ON(!found_boot_cpu);
 }
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-- 
2.7.4

[PATCH v6 08/14] RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

The old name was a bit odd.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index cfb0b02d..4a232600 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -50,7 +50,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 void __init setup_smp(void)
 {
 	struct device_node *dn = NULL;
-	int hart, im_okay_therefore_i_am = 0;
+	int hart;
+	bool found_boot_cpu = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
@@ -58,13 +59,13 @@ void __init setup_smp(void)
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
 			if (hart == smp_processor_id()) {
-				BUG_ON(im_okay_therefore_i_am);
-				im_okay_therefore_i_am = 1;
+				BUG_ON(found_boot_cpu);
+				found_boot_cpu = true;
 			}
 		}
 	}
 
-	BUG_ON(!im_okay_therefore_i_am);
+	BUG_ON(!found_boot_cpu);
 }
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-- 
2.7.4

[PATCH v6 08/14] RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

The old name was a bit odd.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index cfb0b02d..4a232600 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -50,7 +50,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 void __init setup_smp(void)
 {
 	struct device_node *dn = NULL;
-	int hart, im_okay_therefore_i_am = 0;
+	int hart;
+	bool found_boot_cpu = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
@@ -58,13 +59,13 @@ void __init setup_smp(void)
 			set_cpu_possible(hart, true);
 			set_cpu_present(hart, true);
 			if (hart == smp_processor_id()) {
-				BUG_ON(im_okay_therefore_i_am);
-				im_okay_therefore_i_am = 1;
+				BUG_ON(found_boot_cpu);
+				found_boot_cpu = true;
 			}
 		}
 	}
 
-	BUG_ON(!im_okay_therefore_i_am);
+	BUG_ON(!found_boot_cpu);
 }
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 09/14] RISC-V: Use mmgrab()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

commit f1f1007644ff ("mm: add new mmgrab() helper") added a
helper that we missed out on.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/smpboot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 4a232600..17e74831 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/sched/task_stack.h>
+#include <linux/sched/mm.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -101,7 +102,7 @@ asmlinkage void __init smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 
 	/* All kernel threads share the same mm context.  */
-	atomic_inc(&mm->mm_count);
+	mmgrab(mm);
 	current->active_mm = mm;
 
 	trap_init();
-- 
2.7.4

[PATCH v6 09/14] RISC-V: Use mmgrab()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

commit f1f1007644ff ("mm: add new mmgrab() helper") added a
helper that we missed out on.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/smpboot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 4a232600..17e74831 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/sched/task_stack.h>
+#include <linux/sched/mm.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -101,7 +102,7 @@ asmlinkage void __init smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 
 	/* All kernel threads share the same mm context.  */
-	atomic_inc(&mm->mm_count);
+	mmgrab(mm);
 	current->active_mm = mm;
 
 	trap_init();
-- 
2.7.4

[PATCH v6 09/14] RISC-V: Use mmgrab()

[Atish Patra]

From: Palmer Dabbelt <palmer@sifive.com>

commit f1f1007644ff ("mm: add new mmgrab() helper") added a
helper that we missed out on.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/smpboot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 4a232600..17e74831 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/sched/task_stack.h>
+#include <linux/sched/mm.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -101,7 +102,7 @@ asmlinkage void __init smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 
 	/* All kernel threads share the same mm context.  */
-	atomic_inc(&mm->mm_count);
+	mmgrab(mm);
 	current->active_mm = mm;
 
 	trap_init();
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 10/14] RISC-V: Use WRITE_ONCE instead of direct access

[Atish Patra]

The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 17e74831..1e478615 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -81,8 +81,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	__cpu_up_stack_pointer[cpu] = task_stack_page(tidle) + THREAD_SIZE;
-	__cpu_up_task_pointer[cpu] = tidle;
+	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+		  task_stack_page(tidle) + THREAD_SIZE);
+	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
-- 
2.7.4

[PATCH v6 10/14] RISC-V: Use WRITE_ONCE instead of direct access

[Atish Patra]

The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 17e74831..1e478615 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -81,8 +81,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	__cpu_up_stack_pointer[cpu] = task_stack_page(tidle) + THREAD_SIZE;
-	__cpu_up_task_pointer[cpu] = tidle;
+	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+		  task_stack_page(tidle) + THREAD_SIZE);
+	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
-- 
2.7.4

[PATCH v6 10/14] RISC-V: Use WRITE_ONCE instead of direct access

[Atish Patra]

The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/kernel/smpboot.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 17e74831..1e478615 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -81,8 +81,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	__cpu_up_stack_pointer[cpu] = task_stack_page(tidle) + THREAD_SIZE;
-	__cpu_up_task_pointer[cpu] = tidle;
+	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+		  task_stack_page(tidle) + THREAD_SIZE);
+	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 11/14] RISC-V: Add logical CPU indexing for RISC-V

[Atish Patra]

Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 24 +++++++++++++++++++++++-
 arch/riscv/kernel/setup.c    |  4 ++++
 arch/riscv/kernel/smp.c      | 19 +++++++++++++++++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 85d7619e..47fd61df 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -18,6 +18,13 @@
 #include <linux/irqreturn.h>
 #include <linux/thread_info.h>
 
+#define INVALID_HARTID ULONG_MAX
+/*
+ * Mapping between linux logical cpu index and hartid.
+ */
+extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
+#define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
+
 #ifdef CONFIG_SMP
 
 /* SMP initialization hook for setup_arch */
@@ -29,12 +36,27 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 /* Hook for the generic smp_call_function_single() routine. */
 void arch_send_call_function_single_ipi(int cpu);
 
+int riscv_hartid_to_cpuid(int hartid);
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
+
 /*
  * Obtains the hart ID of the currently executing task.  This relies on
  * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
-#endif /* CONFIG_SMP */
+#else
+
+static inline int riscv_hartid_to_cpuid(int hartid)
+{
+	return 0;
+}
 
+static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
+					      struct cpumask *out)
+{
+	cpumask_set_cpu(cpuid_to_hartid_map(0), out);
+}
+
+#endif /* CONFIG_SMP */
 #endif /* _ASM_RISCV_SMP_H */
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index db20dc63..d40b7c0f 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -82,6 +82,10 @@ EXPORT_SYMBOL(empty_zero_page);
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
 
+unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = INVALID_HARTID
+};
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 906fe21e..0bd48935 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -38,7 +38,26 @@ enum ipi_message_type {
 	IPI_MAX
 };
 
+int riscv_hartid_to_cpuid(int hartid)
+{
+	int i = -1;
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpuid_to_hartid_map(i) == hartid)
+			return i;
+
+	pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
+	BUG();
+	return i;
+}
 
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
+{
+	int cpu;
+
+	for_each_cpu(cpu, in)
+		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
+}
 /* Unsupported */
 int setup_profiling_timer(unsigned int multiplier)
 {
-- 
2.7.4

[PATCH v6 11/14] RISC-V: Add logical CPU indexing for RISC-V

[Atish Patra]

Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 24 +++++++++++++++++++++++-
 arch/riscv/kernel/setup.c    |  4 ++++
 arch/riscv/kernel/smp.c      | 19 +++++++++++++++++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 85d7619e..47fd61df 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -18,6 +18,13 @@
 #include <linux/irqreturn.h>
 #include <linux/thread_info.h>
 
+#define INVALID_HARTID ULONG_MAX
+/*
+ * Mapping between linux logical cpu index and hartid.
+ */
+extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
+#define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
+
 #ifdef CONFIG_SMP
 
 /* SMP initialization hook for setup_arch */
@@ -29,12 +36,27 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 /* Hook for the generic smp_call_function_single() routine. */
 void arch_send_call_function_single_ipi(int cpu);
 
+int riscv_hartid_to_cpuid(int hartid);
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
+
 /*
  * Obtains the hart ID of the currently executing task.  This relies on
  * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
-#endif /* CONFIG_SMP */
+#else
+
+static inline int riscv_hartid_to_cpuid(int hartid)
+{
+	return 0;
+}
 
+static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
+					      struct cpumask *out)
+{
+	cpumask_set_cpu(cpuid_to_hartid_map(0), out);
+}
+
+#endif /* CONFIG_SMP */
 #endif /* _ASM_RISCV_SMP_H */
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index db20dc63..d40b7c0f 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -82,6 +82,10 @@ EXPORT_SYMBOL(empty_zero_page);
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
 
+unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = INVALID_HARTID
+};
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 906fe21e..0bd48935 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -38,7 +38,26 @@ enum ipi_message_type {
 	IPI_MAX
 };
 
+int riscv_hartid_to_cpuid(int hartid)
+{
+	int i = -1;
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpuid_to_hartid_map(i) == hartid)
+			return i;
+
+	pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
+	BUG();
+	return i;
+}
 
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
+{
+	int cpu;
+
+	for_each_cpu(cpu, in)
+		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
+}
 /* Unsupported */
 int setup_profiling_timer(unsigned int multiplier)
 {
-- 
2.7.4

[PATCH v6 11/14] RISC-V: Add logical CPU indexing for RISC-V

[Atish Patra]

Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.

Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/smp.h | 24 +++++++++++++++++++++++-
 arch/riscv/kernel/setup.c    |  4 ++++
 arch/riscv/kernel/smp.c      | 19 +++++++++++++++++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 85d7619e..47fd61df 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -18,6 +18,13 @@
 #include <linux/irqreturn.h>
 #include <linux/thread_info.h>
 
+#define INVALID_HARTID ULONG_MAX
+/*
+ * Mapping between linux logical cpu index and hartid.
+ */
+extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
+#define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
+
 #ifdef CONFIG_SMP
 
 /* SMP initialization hook for setup_arch */
@@ -29,12 +36,27 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 /* Hook for the generic smp_call_function_single() routine. */
 void arch_send_call_function_single_ipi(int cpu);
 
+int riscv_hartid_to_cpuid(int hartid);
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
+
 /*
  * Obtains the hart ID of the currently executing task.  This relies on
  * THREAD_INFO_IN_TASK, but we define that unconditionally.
  */
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
-#endif /* CONFIG_SMP */
+#else
+
+static inline int riscv_hartid_to_cpuid(int hartid)
+{
+	return 0;
+}
 
+static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
+					      struct cpumask *out)
+{
+	cpumask_set_cpu(cpuid_to_hartid_map(0), out);
+}
+
+#endif /* CONFIG_SMP */
 #endif /* _ASM_RISCV_SMP_H */
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index db20dc63..d40b7c0f 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -82,6 +82,10 @@ EXPORT_SYMBOL(empty_zero_page);
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
 
+unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = INVALID_HARTID
+};
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 906fe21e..0bd48935 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -38,7 +38,26 @@ enum ipi_message_type {
 	IPI_MAX
 };
 
+int riscv_hartid_to_cpuid(int hartid)
+{
+	int i = -1;
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpuid_to_hartid_map(i) == hartid)
+			return i;
+
+	pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
+	BUG();
+	return i;
+}
 
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
+{
+	int cpu;
+
+	for_each_cpu(cpu, in)
+		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
+}
 /* Unsupported */
 int setup_profiling_timer(unsigned int multiplier)
 {
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 12/14] RISC-V: Use Linux logical CPU number instead of hartid

[Atish Patra]

Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/tlbflush.h | 16 +++++++++++++---
 arch/riscv/kernel/cpu.c           |  8 +++++---
 arch/riscv/kernel/head.S          |  4 +++-
 arch/riscv/kernel/setup.c         |  6 ++++++
 arch/riscv/kernel/smp.c           | 24 +++++++++++++++---------
 arch/riscv/kernel/smpboot.c       | 25 ++++++++++++++++---------
 drivers/clocksource/riscv_timer.c | 12 ++++++++----
 drivers/irqchip/irq-sifive-plic.c |  8 +++++---
 8 files changed, 71 insertions(+), 32 deletions(-)

diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 85c2d8ba..54fee0ca 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -16,6 +16,7 @@
 #define _ASM_RISCV_TLBFLUSH_H
 
 #include <linux/mm_types.h>
+#include <asm/smp.h>
 
 /*
  * Flush entire local TLB.  'sfence.vma' implicitly fences with the instruction
@@ -49,13 +50,22 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 
 #include <asm/sbi.h>
 
+static inline void remote_sfence_vma(struct cpumask *cmask, unsigned long start,
+				     unsigned long size)
+{
+	struct cpumask hmask;
+
+	cpumask_clear(&hmask);
+	riscv_cpuid_to_hartid_mask(cmask, &hmask);
+	sbi_remote_sfence_vma(hmask.bits, start, size);
+}
+
 #define flush_tlb_all() sbi_remote_sfence_vma(NULL, 0, -1)
 #define flush_tlb_page(vma, addr) flush_tlb_range(vma, addr, 0)
 #define flush_tlb_range(vma, start, end) \
-	sbi_remote_sfence_vma(mm_cpumask((vma)->vm_mm)->bits, \
-			      start, (end) - (start))
+	remote_sfence_vma(mm_cpumask((vma)->vm_mm), start, (end) - (start))
 #define flush_tlb_mm(mm) \
-	sbi_remote_sfence_vma(mm_cpumask(mm)->bits, 0, -1)
+	remote_sfence_vma(mm_cpumask(mm), 0, -1)
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 4723e235..cccc6f61 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <asm/smp.h>
 
 /*
  * Returns the hart ID of the given device tree node, or -1 if the device tree
@@ -138,11 +139,12 @@ static void c_stop(struct seq_file *m, void *v)
 
 static int c_show(struct seq_file *m, void *v)
 {
-	unsigned long hart_id = (unsigned long)v - 1;
-	struct device_node *node = of_get_cpu_node(hart_id, NULL);
+	unsigned long cpu_id = (unsigned long)v - 1;
+	struct device_node *node = of_get_cpu_node(cpuid_to_hartid_map(cpu_id),
+						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", hart_id);
+	seq_printf(m, "hart\t: %lu\n", cpu_id);
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index c4d2c63f..711190d4 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -47,6 +47,8 @@ ENTRY(_start)
 	/* Save hart ID and DTB physical address */
 	mv s0, a0
 	mv s1, a1
+	la a2, boot_cpu_hartid
+	REG_S a0, (a2)
 
 	/* Initialize page tables and relocate to virtual addresses */
 	la sp, init_thread_union + THREAD_SIZE
@@ -55,7 +57,7 @@ ENTRY(_start)
 
 	/* Restore C environment */
 	la tp, init_task
-	sw s0, TASK_TI_CPU(tp)
+	sw zero, TASK_TI_CPU(tp)
 
 	la sp, init_thread_union
 	li a0, ASM_THREAD_SIZE
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index d40b7c0f..afc78aff 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -81,11 +81,17 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
+unsigned long boot_cpu_hartid;
 
 unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
 	[0 ... NR_CPUS-1] = INVALID_HARTID
 };
 
+void __init smp_setup_processor_id(void)
+{
+	cpuid_to_hartid_map(0) = boot_cpu_hartid;
+}
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 0bd48935..4eac0094 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -97,14 +97,18 @@ void riscv_software_interrupt(void)
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
-	int i;
+	int cpuid, hartid;
+	struct cpumask hartid_mask;
 
+	cpumask_clear(&hartid_mask);
 	mb();
-	for_each_cpu(i, to_whom)
-		set_bit(operation, &ipi_data[i].bits);
-
+	for_each_cpu(cpuid, to_whom) {
+		set_bit(operation, &ipi_data[cpuid].bits);
+		hartid = cpuid_to_hartid_map(cpuid);
+		cpumask_set_cpu(hartid, &hartid_mask);
+	}
 	mb();
-	sbi_send_ipi(cpumask_bits(to_whom));
+	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
@@ -146,7 +150,7 @@ void smp_send_reschedule(int cpu)
 void flush_icache_mm(struct mm_struct *mm, bool local)
 {
 	unsigned int cpu;
-	cpumask_t others, *mask;
+	cpumask_t others, hmask, *mask;
 
 	preempt_disable();
 
@@ -164,9 +168,11 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 	 */
 	cpumask_andnot(&others, mm_cpumask(mm), cpumask_of(cpu));
 	local |= cpumask_empty(&others);
-	if (mm != current->active_mm || !local)
-		sbi_remote_fence_i(others.bits);
-	else {
+	if (mm != current->active_mm || !local) {
+		cpumask_clear(&hmask);
+		riscv_cpuid_to_hartid_mask(&others, &hmask);
+		sbi_remote_fence_i(hmask.bits);
+	} else {
 		/*
 		 * It's assumed that at least one strongly ordered operation is
 		 * performed on this hart between setting a hart's cpumask bit
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 1e478615..18cda0e8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,17 +53,23 @@ void __init setup_smp(void)
 	struct device_node *dn = NULL;
 	int hart;
 	bool found_boot_cpu = false;
+	int cpuid = 1;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
-		if (hart >= 0) {
-			set_cpu_possible(hart, true);
-			set_cpu_present(hart, true);
-			if (hart == smp_processor_id()) {
-				BUG_ON(found_boot_cpu);
-				found_boot_cpu = true;
-			}
+		if (hart < 0)
+			continue;
+
+		if (hart == cpuid_to_hartid_map(0)) {
+			BUG_ON(found_boot_cpu);
+			found_boot_cpu = 1;
+			continue;
 		}
+
+		cpuid_to_hartid_map(cpuid) = hart;
+		set_cpu_possible(cpuid, true);
+		set_cpu_present(cpuid, true);
+		cpuid++;
 	}
 
 	BUG_ON(!found_boot_cpu);
@@ -71,6 +77,7 @@ void __init setup_smp(void)
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
+	int hartid = cpuid_to_hartid_map(cpu);
 	tidle->thread_info.cpu = cpu;
 
 	/*
@@ -81,9 +88,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+	WRITE_ONCE(__cpu_up_stack_pointer[hartid],
 		  task_stack_page(tidle) + THREAD_SIZE);
-	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
+	WRITE_ONCE(__cpu_up_task_pointer[hartid], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index ad7453fc..084e97dc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <asm/smp.h>
 #include <asm/sbi.h>
 
 /*
@@ -84,13 +85,16 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hartid(n), error;
+	int cpuid, hartid, error;
 	struct clocksource *cs;
 
-	if (cpu_id != smp_processor_id())
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
 		return 0;
 
-	cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
 	clocksource_register_hz(cs, riscv_timebase);
 
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
@@ -98,7 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
 	if (error)
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
-		       error, cpu_id);
+		       error, cpuid);
 	return error;
 }
 
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index c55eaa31..357e9daf 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 /*
  * This driver implements a version of the RISC-V PLIC with the actual layout
@@ -218,7 +219,7 @@ static int __init plic_init(struct device_node *node,
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
-		int cpu;
+		int cpu, hartid;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -229,12 +230,13 @@ static int __init plic_init(struct device_node *node,
 		if (parent.args[0] == -1)
 			continue;
 
-		cpu = plic_find_hart_id(parent.np);
-		if (cpu < 0) {
+		hartid = plic_find_hart_id(parent.np);
+		if (hartid < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
 		}
 
+		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		handler->present = true;
 		handler->ctxid = i;
-- 
2.7.4

[PATCH v6 12/14] RISC-V: Use Linux logical CPU number instead of hartid

[Atish Patra]

Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/tlbflush.h | 16 +++++++++++++---
 arch/riscv/kernel/cpu.c           |  8 +++++---
 arch/riscv/kernel/head.S          |  4 +++-
 arch/riscv/kernel/setup.c         |  6 ++++++
 arch/riscv/kernel/smp.c           | 24 +++++++++++++++---------
 arch/riscv/kernel/smpboot.c       | 25 ++++++++++++++++---------
 drivers/clocksource/riscv_timer.c | 12 ++++++++----
 drivers/irqchip/irq-sifive-plic.c |  8 +++++---
 8 files changed, 71 insertions(+), 32 deletions(-)

diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 85c2d8ba..54fee0ca 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -16,6 +16,7 @@
 #define _ASM_RISCV_TLBFLUSH_H
 
 #include <linux/mm_types.h>
+#include <asm/smp.h>
 
 /*
  * Flush entire local TLB.  'sfence.vma' implicitly fences with the instruction
@@ -49,13 +50,22 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 
 #include <asm/sbi.h>
 
+static inline void remote_sfence_vma(struct cpumask *cmask, unsigned long start,
+				     unsigned long size)
+{
+	struct cpumask hmask;
+
+	cpumask_clear(&hmask);
+	riscv_cpuid_to_hartid_mask(cmask, &hmask);
+	sbi_remote_sfence_vma(hmask.bits, start, size);
+}
+
 #define flush_tlb_all() sbi_remote_sfence_vma(NULL, 0, -1)
 #define flush_tlb_page(vma, addr) flush_tlb_range(vma, addr, 0)
 #define flush_tlb_range(vma, start, end) \
-	sbi_remote_sfence_vma(mm_cpumask((vma)->vm_mm)->bits, \
-			      start, (end) - (start))
+	remote_sfence_vma(mm_cpumask((vma)->vm_mm), start, (end) - (start))
 #define flush_tlb_mm(mm) \
-	sbi_remote_sfence_vma(mm_cpumask(mm)->bits, 0, -1)
+	remote_sfence_vma(mm_cpumask(mm), 0, -1)
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 4723e235..cccc6f61 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <asm/smp.h>
 
 /*
  * Returns the hart ID of the given device tree node, or -1 if the device tree
@@ -138,11 +139,12 @@ static void c_stop(struct seq_file *m, void *v)
 
 static int c_show(struct seq_file *m, void *v)
 {
-	unsigned long hart_id = (unsigned long)v - 1;
-	struct device_node *node = of_get_cpu_node(hart_id, NULL);
+	unsigned long cpu_id = (unsigned long)v - 1;
+	struct device_node *node = of_get_cpu_node(cpuid_to_hartid_map(cpu_id),
+						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", hart_id);
+	seq_printf(m, "hart\t: %lu\n", cpu_id);
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index c4d2c63f..711190d4 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -47,6 +47,8 @@ ENTRY(_start)
 	/* Save hart ID and DTB physical address */
 	mv s0, a0
 	mv s1, a1
+	la a2, boot_cpu_hartid
+	REG_S a0, (a2)
 
 	/* Initialize page tables and relocate to virtual addresses */
 	la sp, init_thread_union + THREAD_SIZE
@@ -55,7 +57,7 @@ ENTRY(_start)
 
 	/* Restore C environment */
 	la tp, init_task
-	sw s0, TASK_TI_CPU(tp)
+	sw zero, TASK_TI_CPU(tp)
 
 	la sp, init_thread_union
 	li a0, ASM_THREAD_SIZE
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index d40b7c0f..afc78aff 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -81,11 +81,17 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
+unsigned long boot_cpu_hartid;
 
 unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
 	[0 ... NR_CPUS-1] = INVALID_HARTID
 };
 
+void __init smp_setup_processor_id(void)
+{
+	cpuid_to_hartid_map(0) = boot_cpu_hartid;
+}
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 0bd48935..4eac0094 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -97,14 +97,18 @@ void riscv_software_interrupt(void)
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
-	int i;
+	int cpuid, hartid;
+	struct cpumask hartid_mask;
 
+	cpumask_clear(&hartid_mask);
 	mb();
-	for_each_cpu(i, to_whom)
-		set_bit(operation, &ipi_data[i].bits);
-
+	for_each_cpu(cpuid, to_whom) {
+		set_bit(operation, &ipi_data[cpuid].bits);
+		hartid = cpuid_to_hartid_map(cpuid);
+		cpumask_set_cpu(hartid, &hartid_mask);
+	}
 	mb();
-	sbi_send_ipi(cpumask_bits(to_whom));
+	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
@@ -146,7 +150,7 @@ void smp_send_reschedule(int cpu)
 void flush_icache_mm(struct mm_struct *mm, bool local)
 {
 	unsigned int cpu;
-	cpumask_t others, *mask;
+	cpumask_t others, hmask, *mask;
 
 	preempt_disable();
 
@@ -164,9 +168,11 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 	 */
 	cpumask_andnot(&others, mm_cpumask(mm), cpumask_of(cpu));
 	local |= cpumask_empty(&others);
-	if (mm != current->active_mm || !local)
-		sbi_remote_fence_i(others.bits);
-	else {
+	if (mm != current->active_mm || !local) {
+		cpumask_clear(&hmask);
+		riscv_cpuid_to_hartid_mask(&others, &hmask);
+		sbi_remote_fence_i(hmask.bits);
+	} else {
 		/*
 		 * It's assumed that at least one strongly ordered operation is
 		 * performed on this hart between setting a hart's cpumask bit
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 1e478615..18cda0e8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,17 +53,23 @@ void __init setup_smp(void)
 	struct device_node *dn = NULL;
 	int hart;
 	bool found_boot_cpu = false;
+	int cpuid = 1;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
-		if (hart >= 0) {
-			set_cpu_possible(hart, true);
-			set_cpu_present(hart, true);
-			if (hart == smp_processor_id()) {
-				BUG_ON(found_boot_cpu);
-				found_boot_cpu = true;
-			}
+		if (hart < 0)
+			continue;
+
+		if (hart == cpuid_to_hartid_map(0)) {
+			BUG_ON(found_boot_cpu);
+			found_boot_cpu = 1;
+			continue;
 		}
+
+		cpuid_to_hartid_map(cpuid) = hart;
+		set_cpu_possible(cpuid, true);
+		set_cpu_present(cpuid, true);
+		cpuid++;
 	}
 
 	BUG_ON(!found_boot_cpu);
@@ -71,6 +77,7 @@ void __init setup_smp(void)
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
+	int hartid = cpuid_to_hartid_map(cpu);
 	tidle->thread_info.cpu = cpu;
 
 	/*
@@ -81,9 +88,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+	WRITE_ONCE(__cpu_up_stack_pointer[hartid],
 		  task_stack_page(tidle) + THREAD_SIZE);
-	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
+	WRITE_ONCE(__cpu_up_task_pointer[hartid], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index ad7453fc..084e97dc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <asm/smp.h>
 #include <asm/sbi.h>
 
 /*
@@ -84,13 +85,16 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hartid(n), error;
+	int cpuid, hartid, error;
 	struct clocksource *cs;
 
-	if (cpu_id != smp_processor_id())
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
 		return 0;
 
-	cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
 	clocksource_register_hz(cs, riscv_timebase);
 
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
@@ -98,7 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
 	if (error)
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
-		       error, cpu_id);
+		       error, cpuid);
 	return error;
 }
 
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index c55eaa31..357e9daf 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 /*
  * This driver implements a version of the RISC-V PLIC with the actual layout
@@ -218,7 +219,7 @@ static int __init plic_init(struct device_node *node,
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
-		int cpu;
+		int cpu, hartid;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -229,12 +230,13 @@ static int __init plic_init(struct device_node *node,
 		if (parent.args[0] == -1)
 			continue;
 
-		cpu = plic_find_hart_id(parent.np);
-		if (cpu < 0) {
+		hartid = plic_find_hart_id(parent.np);
+		if (hartid < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
 		}
 
+		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		handler->present = true;
 		handler->ctxid = i;
-- 
2.7.4

[PATCH v6 12/14] RISC-V: Use Linux logical CPU number instead of hartid

[Atish Patra]

Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/tlbflush.h | 16 +++++++++++++---
 arch/riscv/kernel/cpu.c           |  8 +++++---
 arch/riscv/kernel/head.S          |  4 +++-
 arch/riscv/kernel/setup.c         |  6 ++++++
 arch/riscv/kernel/smp.c           | 24 +++++++++++++++---------
 arch/riscv/kernel/smpboot.c       | 25 ++++++++++++++++---------
 drivers/clocksource/riscv_timer.c | 12 ++++++++----
 drivers/irqchip/irq-sifive-plic.c |  8 +++++---
 8 files changed, 71 insertions(+), 32 deletions(-)

diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 85c2d8ba..54fee0ca 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -16,6 +16,7 @@
 #define _ASM_RISCV_TLBFLUSH_H
 
 #include <linux/mm_types.h>
+#include <asm/smp.h>
 
 /*
  * Flush entire local TLB.  'sfence.vma' implicitly fences with the instruction
@@ -49,13 +50,22 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 
 #include <asm/sbi.h>
 
+static inline void remote_sfence_vma(struct cpumask *cmask, unsigned long start,
+				     unsigned long size)
+{
+	struct cpumask hmask;
+
+	cpumask_clear(&hmask);
+	riscv_cpuid_to_hartid_mask(cmask, &hmask);
+	sbi_remote_sfence_vma(hmask.bits, start, size);
+}
+
 #define flush_tlb_all() sbi_remote_sfence_vma(NULL, 0, -1)
 #define flush_tlb_page(vma, addr) flush_tlb_range(vma, addr, 0)
 #define flush_tlb_range(vma, start, end) \
-	sbi_remote_sfence_vma(mm_cpumask((vma)->vm_mm)->bits, \
-			      start, (end) - (start))
+	remote_sfence_vma(mm_cpumask((vma)->vm_mm), start, (end) - (start))
 #define flush_tlb_mm(mm) \
-	sbi_remote_sfence_vma(mm_cpumask(mm)->bits, 0, -1)
+	remote_sfence_vma(mm_cpumask(mm), 0, -1)
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index 4723e235..cccc6f61 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <asm/smp.h>
 
 /*
  * Returns the hart ID of the given device tree node, or -1 if the device tree
@@ -138,11 +139,12 @@ static void c_stop(struct seq_file *m, void *v)
 
 static int c_show(struct seq_file *m, void *v)
 {
-	unsigned long hart_id = (unsigned long)v - 1;
-	struct device_node *node = of_get_cpu_node(hart_id, NULL);
+	unsigned long cpu_id = (unsigned long)v - 1;
+	struct device_node *node = of_get_cpu_node(cpuid_to_hartid_map(cpu_id),
+						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", hart_id);
+	seq_printf(m, "hart\t: %lu\n", cpu_id);
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index c4d2c63f..711190d4 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -47,6 +47,8 @@ ENTRY(_start)
 	/* Save hart ID and DTB physical address */
 	mv s0, a0
 	mv s1, a1
+	la a2, boot_cpu_hartid
+	REG_S a0, (a2)
 
 	/* Initialize page tables and relocate to virtual addresses */
 	la sp, init_thread_union + THREAD_SIZE
@@ -55,7 +57,7 @@ ENTRY(_start)
 
 	/* Restore C environment */
 	la tp, init_task
-	sw s0, TASK_TI_CPU(tp)
+	sw zero, TASK_TI_CPU(tp)
 
 	la sp, init_thread_union
 	li a0, ASM_THREAD_SIZE
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index d40b7c0f..afc78aff 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -81,11 +81,17 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
+unsigned long boot_cpu_hartid;
 
 unsigned long __cpuid_to_hartid_map[NR_CPUS] = {
 	[0 ... NR_CPUS-1] = INVALID_HARTID
 };
 
+void __init smp_setup_processor_id(void)
+{
+	cpuid_to_hartid_map(0) = boot_cpu_hartid;
+}
+
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 0bd48935..4eac0094 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -97,14 +97,18 @@ void riscv_software_interrupt(void)
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
-	int i;
+	int cpuid, hartid;
+	struct cpumask hartid_mask;
 
+	cpumask_clear(&hartid_mask);
 	mb();
-	for_each_cpu(i, to_whom)
-		set_bit(operation, &ipi_data[i].bits);
-
+	for_each_cpu(cpuid, to_whom) {
+		set_bit(operation, &ipi_data[cpuid].bits);
+		hartid = cpuid_to_hartid_map(cpuid);
+		cpumask_set_cpu(hartid, &hartid_mask);
+	}
 	mb();
-	sbi_send_ipi(cpumask_bits(to_whom));
+	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
@@ -146,7 +150,7 @@ void smp_send_reschedule(int cpu)
 void flush_icache_mm(struct mm_struct *mm, bool local)
 {
 	unsigned int cpu;
-	cpumask_t others, *mask;
+	cpumask_t others, hmask, *mask;
 
 	preempt_disable();
 
@@ -164,9 +168,11 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 	 */
 	cpumask_andnot(&others, mm_cpumask(mm), cpumask_of(cpu));
 	local |= cpumask_empty(&others);
-	if (mm != current->active_mm || !local)
-		sbi_remote_fence_i(others.bits);
-	else {
+	if (mm != current->active_mm || !local) {
+		cpumask_clear(&hmask);
+		riscv_cpuid_to_hartid_mask(&others, &hmask);
+		sbi_remote_fence_i(hmask.bits);
+	} else {
 		/*
 		 * It's assumed that at least one strongly ordered operation is
 		 * performed on this hart between setting a hart's cpumask bit
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 1e478615..18cda0e8 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -53,17 +53,23 @@ void __init setup_smp(void)
 	struct device_node *dn = NULL;
 	int hart;
 	bool found_boot_cpu = false;
+	int cpuid = 1;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
 		hart = riscv_of_processor_hartid(dn);
-		if (hart >= 0) {
-			set_cpu_possible(hart, true);
-			set_cpu_present(hart, true);
-			if (hart == smp_processor_id()) {
-				BUG_ON(found_boot_cpu);
-				found_boot_cpu = true;
-			}
+		if (hart < 0)
+			continue;
+
+		if (hart == cpuid_to_hartid_map(0)) {
+			BUG_ON(found_boot_cpu);
+			found_boot_cpu = 1;
+			continue;
 		}
+
+		cpuid_to_hartid_map(cpuid) = hart;
+		set_cpu_possible(cpuid, true);
+		set_cpu_present(cpuid, true);
+		cpuid++;
 	}
 
 	BUG_ON(!found_boot_cpu);
@@ -71,6 +77,7 @@ void __init setup_smp(void)
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
+	int hartid = cpuid_to_hartid_map(cpu);
 	tidle->thread_info.cpu = cpu;
 
 	/*
@@ -81,9 +88,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	 * the spinning harts that they can continue the boot process.
 	 */
 	smp_mb();
-	WRITE_ONCE(__cpu_up_stack_pointer[cpu],
+	WRITE_ONCE(__cpu_up_stack_pointer[hartid],
 		  task_stack_page(tidle) + THREAD_SIZE);
-	WRITE_ONCE(__cpu_up_task_pointer[cpu], tidle);
+	WRITE_ONCE(__cpu_up_task_pointer[hartid], tidle);
 
 	while (!cpu_online(cpu))
 		cpu_relax();
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
index ad7453fc..084e97dc 100644
--- a/drivers/clocksource/riscv_timer.c
+++ b/drivers/clocksource/riscv_timer.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <asm/smp.h>
 #include <asm/sbi.h>
 
 /*
@@ -84,13 +85,16 @@ void riscv_timer_interrupt(void)
 
 static int __init riscv_timer_init_dt(struct device_node *n)
 {
-	int cpu_id = riscv_of_processor_hartid(n), error;
+	int cpuid, hartid, error;
 	struct clocksource *cs;
 
-	if (cpu_id != smp_processor_id())
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
 		return 0;
 
-	cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
 	clocksource_register_hz(cs, riscv_timebase);
 
 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
@@ -98,7 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
 	if (error)
 		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
-		       error, cpu_id);
+		       error, cpuid);
 	return error;
 }
 
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index c55eaa31..357e9daf 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 /*
  * This driver implements a version of the RISC-V PLIC with the actual layout
@@ -218,7 +219,7 @@ static int __init plic_init(struct device_node *node,
 		struct of_phandle_args parent;
 		struct plic_handler *handler;
 		irq_hw_number_t hwirq;
-		int cpu;
+		int cpu, hartid;
 
 		if (of_irq_parse_one(node, i, &parent)) {
 			pr_err("failed to parse parent for context %d.\n", i);
@@ -229,12 +230,13 @@ static int __init plic_init(struct device_node *node,
 		if (parent.args[0] == -1)
 			continue;
 
-		cpu = plic_find_hart_id(parent.np);
-		if (cpu < 0) {
+		hartid = plic_find_hart_id(parent.np);
+		if (hartid < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
 		}
 
+		cpu = riscv_hartid_to_cpuid(hartid);
 		handler = per_cpu_ptr(&plic_handlers, cpu);
 		handler->present = true;
 		handler->ctxid = i;
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 13/14] RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().

With this patch, contents of /proc/cpuinfo looks as follows:
processor	: 0
hart		: 1
isa		: rv64imafdc
mmu		: sv48

processor	: 1
hart		: 0
isa		: rv64imafdc
mmu		: sv48

processor	: 2
hart		: 2
isa		: rv64imafdc
mmu		: sv48

processor	: 3
hart		: 3
isa		: rv64imafdc
mmu		: sv48

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/cpu.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index cccc6f61..3a5a2ee3 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -81,7 +81,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 #endif
 
 	/* Print the base ISA, as we already know it's legal. */
-	seq_puts(f, "isa\t: ");
+	seq_puts(f, "isa\t\t: ");
 	seq_write(f, isa, 5);
 	isa += 5;
 
@@ -96,6 +96,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 			isa++;
 		}
 	}
+	seq_puts(f, "\n");
 
 	/*
 	 * If we were given an unsupported ISA in the device tree then print
@@ -116,7 +117,7 @@ static void print_mmu(struct seq_file *f, const char *mmu_type)
 		return;
 #endif
 
-	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+	seq_printf(f, "mmu\t\t: %s\n", mmu_type+6);
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
@@ -144,14 +145,15 @@ static int c_show(struct seq_file *m, void *v)
 						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", cpu_id);
+	seq_printf(m, "processor\t: %lu\n", cpu_id);
+	seq_printf(m, "hart\t\t: %lu\n", cpuid_to_hartid_map(cpu_id));
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
 		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
-		seq_printf(m, "uarch\t: %s\n", compat);
+		seq_printf(m, "uarch\t\t: %s\n", compat);
 	seq_puts(m, "\n");
 
 	return 0;
-- 
2.7.4

[PATCH v6 13/14] RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().

With this patch, contents of /proc/cpuinfo looks as follows:
processor	: 0
hart		: 1
isa		: rv64imafdc
mmu		: sv48

processor	: 1
hart		: 0
isa		: rv64imafdc
mmu		: sv48

processor	: 2
hart		: 2
isa		: rv64imafdc
mmu		: sv48

processor	: 3
hart		: 3
isa		: rv64imafdc
mmu		: sv48

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/cpu.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index cccc6f61..3a5a2ee3 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -81,7 +81,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 #endif
 
 	/* Print the base ISA, as we already know it's legal. */
-	seq_puts(f, "isa\t: ");
+	seq_puts(f, "isa\t\t: ");
 	seq_write(f, isa, 5);
 	isa += 5;
 
@@ -96,6 +96,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 			isa++;
 		}
 	}
+	seq_puts(f, "\n");
 
 	/*
 	 * If we were given an unsupported ISA in the device tree then print
@@ -116,7 +117,7 @@ static void print_mmu(struct seq_file *f, const char *mmu_type)
 		return;
 #endif
 
-	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+	seq_printf(f, "mmu\t\t: %s\n", mmu_type+6);
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
@@ -144,14 +145,15 @@ static int c_show(struct seq_file *m, void *v)
 						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", cpu_id);
+	seq_printf(m, "processor\t: %lu\n", cpu_id);
+	seq_printf(m, "hart\t\t: %lu\n", cpuid_to_hartid_map(cpu_id));
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
 		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
-		seq_printf(m, "uarch\t: %s\n", compat);
+		seq_printf(m, "uarch\t\t: %s\n", compat);
 	seq_puts(m, "\n");
 
 	return 0;
-- 
2.7.4

[PATCH v6 13/14] RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().

With this patch, contents of /proc/cpuinfo looks as follows:
processor	: 0
hart		: 1
isa		: rv64imafdc
mmu		: sv48

processor	: 1
hart		: 0
isa		: rv64imafdc
mmu		: sv48

processor	: 2
hart		: 2
isa		: rv64imafdc
mmu		: sv48

processor	: 3
hart		: 3
isa		: rv64imafdc
mmu		: sv48

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kernel/cpu.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index cccc6f61..3a5a2ee3 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -81,7 +81,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 #endif
 
 	/* Print the base ISA, as we already know it's legal. */
-	seq_puts(f, "isa\t: ");
+	seq_puts(f, "isa\t\t: ");
 	seq_write(f, isa, 5);
 	isa += 5;
 
@@ -96,6 +96,7 @@ static void print_isa(struct seq_file *f, const char *orig_isa)
 			isa++;
 		}
 	}
+	seq_puts(f, "\n");
 
 	/*
 	 * If we were given an unsupported ISA in the device tree then print
@@ -116,7 +117,7 @@ static void print_mmu(struct seq_file *f, const char *mmu_type)
 		return;
 #endif
 
-	seq_printf(f, "mmu\t: %s\n", mmu_type+6);
+	seq_printf(f, "mmu\t\t: %s\n", mmu_type+6);
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
@@ -144,14 +145,15 @@ static int c_show(struct seq_file *m, void *v)
 						   NULL);
 	const char *compat, *isa, *mmu;
 
-	seq_printf(m, "hart\t: %lu\n", cpu_id);
+	seq_printf(m, "processor\t: %lu\n", cpu_id);
+	seq_printf(m, "hart\t\t: %lu\n", cpuid_to_hartid_map(cpu_id));
 	if (!of_property_read_string(node, "riscv,isa", &isa))
 		print_isa(m, isa);
 	if (!of_property_read_string(node, "mmu-type", &mmu))
 		print_mmu(m, mmu);
 	if (!of_property_read_string(node, "compatible", &compat)
 	    && strcmp(compat, "riscv"))
-		seq_printf(m, "uarch\t: %s\n", compat);
+		seq_printf(m, "uarch\t\t: %s\n", compat);
 	seq_puts(m, "\n");
 
 	return 0;
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 14/14] RISC-V: Show IPI stats

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.

Now the contents of /proc/interrupts" will look like below:
           CPU0       CPU1       CPU2       CPU3
  8:         17          7          6         14  SiFive PLIC   8  virtio0
 10:         10         10          9         11  SiFive PLIC  10  ttyS0
IPI0:       170        673        251         79  Rescheduling interrupts
IPI1:         1         12         27          1  Function call interrupts

Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

Changes since v2:
 - Remove use of IPI_CALL_WAKEUP because it's being removed

Changes since v1:
 - Add stub inline show_ipi_stats() function for !CONFIG_SMP
 - Make ipi_names[] dynamically sized at compile time
 - Minor beautification of ipi_names[] using tabs
---
 arch/riscv/include/asm/smp.h |  9 +++++++++
 arch/riscv/kernel/irq.c      |  8 ++++++++
 arch/riscv/kernel/smp.c      | 39 ++++++++++++++++++++++++++++++++-------
 3 files changed, 49 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 47fd61df..41aa73b4 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -25,8 +25,13 @@
 extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
 #define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
 
+struct seq_file;
+
 #ifdef CONFIG_SMP
 
+/* print IPI stats */
+void show_ipi_stats(struct seq_file *p, int prec);
+
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
@@ -47,6 +52,10 @@ void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
 #else
 
+static inline void show_ipi_stats(struct seq_file *p, int prec)
+{
+}
+
 static inline int riscv_hartid_to_cpuid(int hartid)
 {
 	return 0;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index ca459331..48e6b7db 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -8,6 +8,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
+#include <linux/seq_file.h>
+#include <asm/smp.h>
 
 /*
  * Possible interrupt causes:
@@ -24,6 +26,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	show_ipi_stats(p, prec);
+	return 0;
+}
+
 asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 4eac0094..57b1383e 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -22,22 +22,24 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
+#include <linux/seq_file.h>
 
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
-
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_MAX
 };
 
+/* A collection of single bit ipi messages.  */
+static struct {
+	unsigned long stats[IPI_MAX] ____cacheline_aligned;
+	unsigned long bits ____cacheline_aligned;
+} ipi_data[NR_CPUS] __cacheline_aligned;
+
 int riscv_hartid_to_cpuid(int hartid)
 {
 	int i = -1;
@@ -67,6 +69,7 @@ int setup_profiling_timer(unsigned int multiplier)
 void riscv_software_interrupt(void)
 {
 	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
+	unsigned long *stats = ipi_data[smp_processor_id()].stats;
 
 	/* Clear pending IPI */
 	csr_clear(sip, SIE_SSIE);
@@ -81,11 +84,15 @@ void riscv_software_interrupt(void)
 		if (ops == 0)
 			return;
 
-		if (ops & (1 << IPI_RESCHEDULE))
+		if (ops & (1 << IPI_RESCHEDULE)) {
+			stats[IPI_RESCHEDULE]++;
 			scheduler_ipi();
+		}
 
-		if (ops & (1 << IPI_CALL_FUNC))
+		if (ops & (1 << IPI_CALL_FUNC)) {
+			stats[IPI_CALL_FUNC]++;
 			generic_smp_call_function_interrupt();
+		}
 
 		BUG_ON((ops >> IPI_MAX) != 0);
 
@@ -111,6 +118,24 @@ send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
+static const char * const ipi_names[] = {
+	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
+	[IPI_CALL_FUNC]		= "Function call interrupts",
+};
+
+void show_ipi_stats(struct seq_file *p, int prec)
+{
+	unsigned int cpu, i;
+
+	for (i = 0; i < IPI_MAX; i++) {
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+		seq_printf(p, " %s\n", ipi_names[i]);
+	}
+}
+
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
-- 
2.7.4

[PATCH v6 14/14] RISC-V: Show IPI stats

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.

Now the contents of /proc/interrupts" will look like below:
           CPU0       CPU1       CPU2       CPU3
  8:         17          7          6         14  SiFive PLIC   8  virtio0
 10:         10         10          9         11  SiFive PLIC  10  ttyS0
IPI0:       170        673        251         79  Rescheduling interrupts
IPI1:         1         12         27          1  Function call interrupts

Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

Changes since v2:
 - Remove use of IPI_CALL_WAKEUP because it's being removed

Changes since v1:
 - Add stub inline show_ipi_stats() function for !CONFIG_SMP
 - Make ipi_names[] dynamically sized at compile time
 - Minor beautification of ipi_names[] using tabs
---
 arch/riscv/include/asm/smp.h |  9 +++++++++
 arch/riscv/kernel/irq.c      |  8 ++++++++
 arch/riscv/kernel/smp.c      | 39 ++++++++++++++++++++++++++++++++-------
 3 files changed, 49 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 47fd61df..41aa73b4 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -25,8 +25,13 @@
 extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
 #define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
 
+struct seq_file;
+
 #ifdef CONFIG_SMP
 
+/* print IPI stats */
+void show_ipi_stats(struct seq_file *p, int prec);
+
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
@@ -47,6 +52,10 @@ void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
 #else
 
+static inline void show_ipi_stats(struct seq_file *p, int prec)
+{
+}
+
 static inline int riscv_hartid_to_cpuid(int hartid)
 {
 	return 0;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index ca459331..48e6b7db 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -8,6 +8,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
+#include <linux/seq_file.h>
+#include <asm/smp.h>
 
 /*
  * Possible interrupt causes:
@@ -24,6 +26,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	show_ipi_stats(p, prec);
+	return 0;
+}
+
 asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 4eac0094..57b1383e 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -22,22 +22,24 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
+#include <linux/seq_file.h>
 
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
-
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_MAX
 };
 
+/* A collection of single bit ipi messages.  */
+static struct {
+	unsigned long stats[IPI_MAX] ____cacheline_aligned;
+	unsigned long bits ____cacheline_aligned;
+} ipi_data[NR_CPUS] __cacheline_aligned;
+
 int riscv_hartid_to_cpuid(int hartid)
 {
 	int i = -1;
@@ -67,6 +69,7 @@ int setup_profiling_timer(unsigned int multiplier)
 void riscv_software_interrupt(void)
 {
 	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
+	unsigned long *stats = ipi_data[smp_processor_id()].stats;
 
 	/* Clear pending IPI */
 	csr_clear(sip, SIE_SSIE);
@@ -81,11 +84,15 @@ void riscv_software_interrupt(void)
 		if (ops == 0)
 			return;
 
-		if (ops & (1 << IPI_RESCHEDULE))
+		if (ops & (1 << IPI_RESCHEDULE)) {
+			stats[IPI_RESCHEDULE]++;
 			scheduler_ipi();
+		}
 
-		if (ops & (1 << IPI_CALL_FUNC))
+		if (ops & (1 << IPI_CALL_FUNC)) {
+			stats[IPI_CALL_FUNC]++;
 			generic_smp_call_function_interrupt();
+		}
 
 		BUG_ON((ops >> IPI_MAX) != 0);
 
@@ -111,6 +118,24 @@ send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
+static const char * const ipi_names[] = {
+	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
+	[IPI_CALL_FUNC]		= "Function call interrupts",
+};
+
+void show_ipi_stats(struct seq_file *p, int prec)
+{
+	unsigned int cpu, i;
+
+	for (i = 0; i < IPI_MAX; i++) {
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+		seq_printf(p, " %s\n", ipi_names[i]);
+	}
+}
+
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
-- 
2.7.4

[PATCH v6 14/14] RISC-V: Show IPI stats

[Atish Patra]

From: Anup Patel <anup@brainfault.org>

This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.

Now the contents of /proc/interrupts" will look like below:
           CPU0       CPU1       CPU2       CPU3
  8:         17          7          6         14  SiFive PLIC   8  virtio0
 10:         10         10          9         11  SiFive PLIC  10  ttyS0
IPI0:       170        673        251         79  Rescheduling interrupts
IPI1:         1         12         27          1  Function call interrupts

Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

Changes since v2:
 - Remove use of IPI_CALL_WAKEUP because it's being removed

Changes since v1:
 - Add stub inline show_ipi_stats() function for !CONFIG_SMP
 - Make ipi_names[] dynamically sized at compile time
 - Minor beautification of ipi_names[] using tabs
---
 arch/riscv/include/asm/smp.h |  9 +++++++++
 arch/riscv/kernel/irq.c      |  8 ++++++++
 arch/riscv/kernel/smp.c      | 39 ++++++++++++++++++++++++++++++++-------
 3 files changed, 49 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 47fd61df..41aa73b4 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -25,8 +25,13 @@
 extern unsigned long __cpuid_to_hartid_map[NR_CPUS];
 #define cpuid_to_hartid_map(cpu)    __cpuid_to_hartid_map[cpu]
 
+struct seq_file;
+
 #ifdef CONFIG_SMP
 
+/* print IPI stats */
+void show_ipi_stats(struct seq_file *p, int prec);
+
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
@@ -47,6 +52,10 @@ void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
 #else
 
+static inline void show_ipi_stats(struct seq_file *p, int prec)
+{
+}
+
 static inline int riscv_hartid_to_cpuid(int hartid)
 {
 	return 0;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index ca459331..48e6b7db 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -8,6 +8,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
+#include <linux/seq_file.h>
+#include <asm/smp.h>
 
 /*
  * Possible interrupt causes:
@@ -24,6 +26,12 @@
  */
 #define INTERRUPT_CAUSE_FLAG	(1UL << (__riscv_xlen - 1))
 
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	show_ipi_stats(p, prec);
+	return 0;
+}
+
 asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 4eac0094..57b1383e 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -22,22 +22,24 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
+#include <linux/seq_file.h>
 
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
-
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_MAX
 };
 
+/* A collection of single bit ipi messages.  */
+static struct {
+	unsigned long stats[IPI_MAX] ____cacheline_aligned;
+	unsigned long bits ____cacheline_aligned;
+} ipi_data[NR_CPUS] __cacheline_aligned;
+
 int riscv_hartid_to_cpuid(int hartid)
 {
 	int i = -1;
@@ -67,6 +69,7 @@ int setup_profiling_timer(unsigned int multiplier)
 void riscv_software_interrupt(void)
 {
 	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
+	unsigned long *stats = ipi_data[smp_processor_id()].stats;
 
 	/* Clear pending IPI */
 	csr_clear(sip, SIE_SSIE);
@@ -81,11 +84,15 @@ void riscv_software_interrupt(void)
 		if (ops == 0)
 			return;
 
-		if (ops & (1 << IPI_RESCHEDULE))
+		if (ops & (1 << IPI_RESCHEDULE)) {
+			stats[IPI_RESCHEDULE]++;
 			scheduler_ipi();
+		}
 
-		if (ops & (1 << IPI_CALL_FUNC))
+		if (ops & (1 << IPI_CALL_FUNC)) {
+			stats[IPI_CALL_FUNC]++;
 			generic_smp_call_function_interrupt();
+		}
 
 		BUG_ON((ops >> IPI_MAX) != 0);
 
@@ -111,6 +118,24 @@ send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
+static const char * const ipi_names[] = {
+	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
+	[IPI_CALL_FUNC]		= "Function call interrupts",
+};
+
+void show_ipi_stats(struct seq_file *p, int prec)
+{
+	unsigned int cpu, i;
+
+	for (i = 0; i < IPI_MAX; i++) {
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+		seq_printf(p, " %s\n", ipi_names[i]);
+	}
+}
+
 void arch_send_call_function_ipi_mask(struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 00/14] SMP cleanup and new features

[Palmer Dabbelt]

On Tue, 02 Oct 2018 12:14:53 PDT (-0700), atish.patra@wdc.com wrote:
> This patch series now has evolved to contain several related changes.
>
> 1. Updated the assorted cleanup series by palmer.
> The original cleanup patch series can be found here.
> http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
>
> 2. Implemented decoupling linux logical CPU ids from hart id.
> Some of the work has been inspired from ARM64.
> Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
>
> 3. Included Anup's cleanup and IPI stat patch.
>
> All the patch series have been combined to avoid conflicts as a lot
> of common code is changed different patch sets. I have mostly addressed
> review comments and fixed checkpatch errors from palmer's and anup's series.
>
> v1->v2:
>
> 1. Dropped cpu_ops patch.
> 2. Moved back IRQ cause definitions to irq.h
> 3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
> 4. Renamed CPU id and hart id correctly.
>
> v2-v3:
>
> 1. Added cleanup patches from palmer.
> 2. Moved the hotplug related functions to it's own file.
> 3. Updated stub functions as per coding guidelines.
> 4. Renamed __cpu_logical_map to a more coherent name.
>
> v3-v4:
>
> 1. Addressed minor typos in commit text and code.
> 2. Included Anup's do_IRQ patch.
> 3. Dropped CPU hotplug patch. As there are some concerns
>    about approach, I will submit it separately.
>
> v4->v5:
>
> 1. Minor typo fixes in commit text.
>
> v5->v6:
> 1. Included Anup's IPI stat and cpuinfo patch.
> 2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map
>
>
> Anup Patel (3):
>   RISC-V: No need to pass scause as arg to do_IRQ()
>   RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
>   RISC-V: Show IPI stats
>
> Atish Patra (4):
>   RISC-V: Disable preemption before enabling interrupts
>   RISC-V: Use WRITE_ONCE instead of direct access
>   RISC-V: Add logical CPU indexing for RISC-V
>   RISC-V: Use Linux logical CPU number instead of hartid
>
> Palmer Dabbelt (7):
>   RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
>   RISC-V: Filter ISA and MMU values in cpuinfo
>   RISC-V: Comment on the TLB flush in smp_callin()
>   RISC-V: Provide a cleaner raw_smp_processor_id()
>   RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
>   RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
>   RISC-V: Use mmgrab()
>
>  arch/riscv/include/asm/processor.h |  2 +-
>  arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
>  arch/riscv/include/asm/tlbflush.h  | 16 +++++--
>  arch/riscv/kernel/cacheinfo.c      |  7 ---
>  arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
>  arch/riscv/kernel/entry.S          |  1 -
>  arch/riscv/kernel/head.S           |  4 +-
>  arch/riscv/kernel/irq.c            | 12 +++++-
>  arch/riscv/kernel/setup.c          | 10 +++++
>  arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
>  arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
>  drivers/clocksource/riscv_timer.c  | 12 ++++--
>  drivers/irqchip/irq-sifive-plic.c  | 10 +++--
>  13 files changed, 259 insertions(+), 77 deletions(-)

These are on my "next-smp" branch, and will land in for-next as soon as it's 
done regenerating.  I've replaced the "next-cleanups" branch.

Thanks!

[PATCH v6 00/14] SMP cleanup and new features

[Palmer Dabbelt]

On Tue, 02 Oct 2018 12:14:53 PDT (-0700), atish.patra at wdc.com wrote:
> This patch series now has evolved to contain several related changes.
>
> 1. Updated the assorted cleanup series by palmer.
> The original cleanup patch series can be found here.
> http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
>
> 2. Implemented decoupling linux logical CPU ids from hart id.
> Some of the work has been inspired from ARM64.
> Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
>
> 3. Included Anup's cleanup and IPI stat patch.
>
> All the patch series have been combined to avoid conflicts as a lot
> of common code is changed different patch sets. I have mostly addressed
> review comments and fixed checkpatch errors from palmer's and anup's series.
>
> v1->v2:
>
> 1. Dropped cpu_ops patch.
> 2. Moved back IRQ cause definitions to irq.h
> 3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
> 4. Renamed CPU id and hart id correctly.
>
> v2-v3:
>
> 1. Added cleanup patches from palmer.
> 2. Moved the hotplug related functions to it's own file.
> 3. Updated stub functions as per coding guidelines.
> 4. Renamed __cpu_logical_map to a more coherent name.
>
> v3-v4:
>
> 1. Addressed minor typos in commit text and code.
> 2. Included Anup's do_IRQ patch.
> 3. Dropped CPU hotplug patch. As there are some concerns
>    about approach, I will submit it separately.
>
> v4->v5:
>
> 1. Minor typo fixes in commit text.
>
> v5->v6:
> 1. Included Anup's IPI stat and cpuinfo patch.
> 2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map
>
>
> Anup Patel (3):
>   RISC-V: No need to pass scause as arg to do_IRQ()
>   RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
>   RISC-V: Show IPI stats
>
> Atish Patra (4):
>   RISC-V: Disable preemption before enabling interrupts
>   RISC-V: Use WRITE_ONCE instead of direct access
>   RISC-V: Add logical CPU indexing for RISC-V
>   RISC-V: Use Linux logical CPU number instead of hartid
>
> Palmer Dabbelt (7):
>   RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
>   RISC-V: Filter ISA and MMU values in cpuinfo
>   RISC-V: Comment on the TLB flush in smp_callin()
>   RISC-V: Provide a cleaner raw_smp_processor_id()
>   RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
>   RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
>   RISC-V: Use mmgrab()
>
>  arch/riscv/include/asm/processor.h |  2 +-
>  arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
>  arch/riscv/include/asm/tlbflush.h  | 16 +++++--
>  arch/riscv/kernel/cacheinfo.c      |  7 ---
>  arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
>  arch/riscv/kernel/entry.S          |  1 -
>  arch/riscv/kernel/head.S           |  4 +-
>  arch/riscv/kernel/irq.c            | 12 +++++-
>  arch/riscv/kernel/setup.c          | 10 +++++
>  arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
>  arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
>  drivers/clocksource/riscv_timer.c  | 12 ++++--
>  drivers/irqchip/irq-sifive-plic.c  | 10 +++--
>  13 files changed, 259 insertions(+), 77 deletions(-)

These are on my "next-smp" branch, and will land in for-next as soon as it's 
done regenerating.  I've replaced the "next-cleanups" branch.

Thanks!

Re: [PATCH v6 00/14] SMP cleanup and new features

[Palmer Dabbelt]

On Tue, 02 Oct 2018 12:14:53 PDT (-0700), atish.patra@wdc.com wrote:
> This patch series now has evolved to contain several related changes.
>
> 1. Updated the assorted cleanup series by palmer.
> The original cleanup patch series can be found here.
> http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
>
> 2. Implemented decoupling linux logical CPU ids from hart id.
> Some of the work has been inspired from ARM64.
> Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
>
> 3. Included Anup's cleanup and IPI stat patch.
>
> All the patch series have been combined to avoid conflicts as a lot
> of common code is changed different patch sets. I have mostly addressed
> review comments and fixed checkpatch errors from palmer's and anup's series.
>
> v1->v2:
>
> 1. Dropped cpu_ops patch.
> 2. Moved back IRQ cause definitions to irq.h
> 3. Keep boot CPU hart id and assign zero as the CPU id for boot CPU.
> 4. Renamed CPU id and hart id correctly.
>
> v2-v3:
>
> 1. Added cleanup patches from palmer.
> 2. Moved the hotplug related functions to it's own file.
> 3. Updated stub functions as per coding guidelines.
> 4. Renamed __cpu_logical_map to a more coherent name.
>
> v3-v4:
>
> 1. Addressed minor typos in commit text and code.
> 2. Included Anup's do_IRQ patch.
> 3. Dropped CPU hotplug patch. As there are some concerns
>    about approach, I will submit it separately.
>
> v4->v5:
>
> 1. Minor typo fixes in commit text.
>
> v5->v6:
> 1. Included Anup's IPI stat and cpuinfo patch.
> 2. Fixed a typo cpuid_to_hardid_map->cpuid_to_hartid_map
>
>
> Anup Patel (3):
>   RISC-V: No need to pass scause as arg to do_IRQ()
>   RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
>   RISC-V: Show IPI stats
>
> Atish Patra (4):
>   RISC-V: Disable preemption before enabling interrupts
>   RISC-V: Use WRITE_ONCE instead of direct access
>   RISC-V: Add logical CPU indexing for RISC-V
>   RISC-V: Use Linux logical CPU number instead of hartid
>
> Palmer Dabbelt (7):
>   RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
>   RISC-V: Filter ISA and MMU values in cpuinfo
>   RISC-V: Comment on the TLB flush in smp_callin()
>   RISC-V: Provide a cleaner raw_smp_processor_id()
>   RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
>   RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
>   RISC-V: Use mmgrab()
>
>  arch/riscv/include/asm/processor.h |  2 +-
>  arch/riscv/include/asm/smp.h       | 47 +++++++++++++++-----
>  arch/riscv/include/asm/tlbflush.h  | 16 +++++--
>  arch/riscv/kernel/cacheinfo.c      |  7 ---
>  arch/riscv/kernel/cpu.c            | 87 ++++++++++++++++++++++++++++++++------
>  arch/riscv/kernel/entry.S          |  1 -
>  arch/riscv/kernel/head.S           |  4 +-
>  arch/riscv/kernel/irq.c            | 12 +++++-
>  arch/riscv/kernel/setup.c          | 10 +++++
>  arch/riscv/kernel/smp.c            | 82 ++++++++++++++++++++++++++++-------
>  arch/riscv/kernel/smpboot.c        | 46 ++++++++++++++------
>  drivers/clocksource/riscv_timer.c  | 12 ++++--
>  drivers/irqchip/irq-sifive-plic.c  | 10 +++--
>  13 files changed, 259 insertions(+), 77 deletions(-)

These are on my "next-smp" branch, and will land in for-next as soon as it's 
done regenerating.  I've replaced the "next-cleanups" branch.

Thanks!

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv