From: Biju Das <biju.das@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: Biju Das <biju.das@bp.renesas.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Felipe Balbi <balbi@kernel.org>, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Simon Horman <horms@verge.net.au>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Chris Paterson <Chris.Paterson2@renesas.com>, Fabrizio Castro <fabrizio.castro@bp.renesas.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH 1/9] dt-bindings: usb: hd3ss3220 device tree binding document Date: Wed, 6 Mar 2019 09:07:18 +0000 [thread overview] Message-ID: <1551863246-11656-2-git-send-email-biju.das@bp.renesas.com> (raw) In-Reply-To: <1551863246-11656-1-git-send-email-biju.das@bp.renesas.com> Add device tree binding document for TI HD3SS3220 Type-C DRP port controller driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt new file mode 100644 index 0000000..1fcf6f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -0,0 +1,15 @@ +TI HD3SS3220 TypeC DRP Port Controller. + +Required properties: + - compatible: Must be "ti,hd3ss3220". + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. + - interrupts: <a b> where a is the interrupt number and b represents an + encoding of the sense and level information for the interrupt. + +Example: +hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Biju Das <biju.das@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: Biju Das <biju.das@bp.renesas.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Felipe Balbi <balbi@kernel.org>, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Simon Horman <horms@verge.net.au>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Chris Paterson <Chris.Paterson2@renesas.com>, Fabrizio Castro <fabrizio.castro@bp.renesas.com>, linux-renesas-soc@vger.kernel.org Subject: [1/9] dt-bindings: usb: hd3ss3220 device tree binding document Date: Wed, 6 Mar 2019 09:07:18 +0000 [thread overview] Message-ID: <1551863246-11656-2-git-send-email-biju.das@bp.renesas.com> (raw) Add device tree binding document for TI HD3SS3220 Type-C DRP port controller driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt new file mode 100644 index 0000000..1fcf6f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -0,0 +1,15 @@ +TI HD3SS3220 TypeC DRP Port Controller. + +Required properties: + - compatible: Must be "ti,hd3ss3220". + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. + - interrupts: <a b> where a is the interrupt number and b represents an + encoding of the sense and level information for the interrupt. + +Example: +hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; +};
next prev parent reply other threads:[~2019-03-06 9:07 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-06 9:07 [PATCH 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das 2019-03-06 9:07 ` Biju Das [this message] 2019-03-06 9:07 ` [1/9] dt-bindings: usb: hd3ss3220 device tree binding document Biju Das 2019-03-06 9:07 ` [PATCH 2/9] dt-bindings: usb: renesas_usb3: add extcon support Biju Das 2019-03-06 9:07 ` [2/9] " Biju Das 2019-03-27 23:28 ` [PATCH 2/9] " Rob Herring 2019-03-27 23:28 ` [2/9] " Rob Herring 2019-03-28 13:04 ` [PATCH 2/9] " Biju Das 2019-03-28 13:04 ` [2/9] " Biju Das 2019-03-28 13:04 ` [PATCH 2/9] " Biju Das 2019-03-06 9:07 ` [PATCH 3/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller Biju Das 2019-03-06 9:07 ` [3/9] " Biju Das 2019-03-06 11:34 ` [PATCH 3/9] " Heikki Krogerus 2019-03-06 11:34 ` [3/9] " Heikki Krogerus 2019-03-07 15:57 ` [PATCH 3/9] " Biju Das 2019-03-07 15:57 ` [3/9] " Biju Das 2019-03-06 9:07 ` [PATCH 4/9] usb: gadget: udc: renesas_usb3: use extcon framework to receive connect/disconnect Biju Das 2019-03-06 9:07 ` [4/9] " Biju Das 2019-03-06 12:43 ` [PATCH 4/9] " Heikki Krogerus 2019-03-06 12:43 ` [4/9] " Heikki Krogerus 2019-03-07 16:02 ` [PATCH 4/9] " Biju Das 2019-03-07 16:02 ` [4/9] " Biju Das 2019-03-06 9:07 ` [PATCH 5/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option Biju Das 2019-03-06 9:07 ` [5/9] " Biju Das 2019-03-06 9:07 ` [PATCH 6/9] arm64: renesas_defconfig: Enable " Biju Das 2019-03-06 9:07 ` [PATCH 7/9] arm64: dts: renesas: r8a774c0-cat874: enable USB3.0 host/peripheral device node Biju Das 2019-03-06 9:07 ` [PATCH 8/9] arm64: dts: renesas: r8a774c0-cat874: Enable TI HD3SS3220 support Biju Das 2019-03-06 9:07 ` [PATCH 9/9] arm64: dts: renesas: r8a774c0-cat874: Enable extcon support Biju Das 2019-03-06 13:09 ` [PATCH 0/9] Add USB3.0 and TI HD3SS3220 driver support Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1551863246-11656-2-git-send-email-biju.das@bp.renesas.com \ --to=biju.das@bp.renesas.com \ --cc=Chris.Paterson2@renesas.com \ --cc=balbi@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=fabrizio.castro@bp.renesas.com \ --cc=geert+renesas@glider.be \ --cc=gregkh@linuxfoundation.org \ --cc=heikki.krogerus@linux.intel.com \ --cc=horms@verge.net.au \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.