From: Ludovic Barre <ludovic.Barre@st.com>
To: Mark Brown <broonie@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<linux-mtd@lists.infradead.org>, <linux-spi@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<devicetree@vger.kernel.org>,
Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 0/2] spi: stm32-qspi: add dma support
Date: Fri, 22 Mar 2019 15:35:52 +0100 [thread overview]
Message-ID: <1553265354-16433-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch series adds dma support for the stm32-qspi.
In read mode, the memory map is preferred vs dma
(due to better throughput). If the dma transfer fails the buffer is
sent by polling.
Ludovic Barre (2):
spi: stm32-qspi: add spi_master_put in release function
spi: stm32-qspi: add dma support
drivers/spi/spi-stm32-qspi.c | 182 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 163 insertions(+), 19 deletions(-)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Mark Brown <broonie@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
devicetree@vger.kernel.org, Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 0/2] spi: stm32-qspi: add dma support
Date: Fri, 22 Mar 2019 15:35:52 +0100 [thread overview]
Message-ID: <1553265354-16433-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch series adds dma support for the stm32-qspi.
In read mode, the memory map is preferred vs dma
(due to better throughput). If the dma transfer fails the buffer is
sent by polling.
Ludovic Barre (2):
spi: stm32-qspi: add spi_master_put in release function
spi: stm32-qspi: add dma support
drivers/spi/spi-stm32-qspi.c | 182 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 163 insertions(+), 19 deletions(-)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Mark Brown <broonie@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
linux-mtd@lists.infradead.org,
Ludovic Barre <ludovic.barre@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] spi: stm32-qspi: add dma support
Date: Fri, 22 Mar 2019 15:35:52 +0100 [thread overview]
Message-ID: <1553265354-16433-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch series adds dma support for the stm32-qspi.
In read mode, the memory map is preferred vs dma
(due to better throughput). If the dma transfer fails the buffer is
sent by polling.
Ludovic Barre (2):
spi: stm32-qspi: add spi_master_put in release function
spi: stm32-qspi: add dma support
drivers/spi/spi-stm32-qspi.c | 182 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 163 insertions(+), 19 deletions(-)
--
2.7.4
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Mark Brown <broonie@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
linux-mtd@lists.infradead.org,
Ludovic Barre <ludovic.barre@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] spi: stm32-qspi: add dma support
Date: Fri, 22 Mar 2019 15:35:52 +0100 [thread overview]
Message-ID: <1553265354-16433-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch series adds dma support for the stm32-qspi.
In read mode, the memory map is preferred vs dma
(due to better throughput). If the dma transfer fails the buffer is
sent by polling.
Ludovic Barre (2):
spi: stm32-qspi: add spi_master_put in release function
spi: stm32-qspi: add dma support
drivers/spi/spi-stm32-qspi.c | 182 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 163 insertions(+), 19 deletions(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-03-22 14:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 14:35 Ludovic Barre [this message]
2019-03-22 14:35 ` [PATCH 0/2] spi: stm32-qspi: add dma support Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` [PATCH 1/2] spi: stm32-qspi: add spi_master_put in release function Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-25 16:03 ` Mark Brown
2019-03-25 16:03 ` Mark Brown
2019-03-25 16:03 ` Mark Brown
2019-03-25 16:19 ` Ludovic BARRE
2019-03-25 16:19 ` Ludovic BARRE
2019-03-25 16:19 ` Ludovic BARRE
2019-03-25 16:19 ` Ludovic BARRE
2019-03-22 14:35 ` [PATCH 2/2] spi: stm32-qspi: add dma support Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
2019-03-22 14:35 ` Ludovic Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553265354-16433-1-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=bbrezillon@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marek.vasut@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.