All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Chiras <robert.chiras@nxp.com>
To: "Guido Günther" <agx@sigxcpu.org>, "Marek Vasut" <marex@denx.de>,
	"Stefan Agner" <stefan@agner.ch>,
	"David Airlie" <airlied@linux.ie>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 09/15] drm/mxsfb: Add max-memory-bandwidth property for MXSFB
Date: Wed, 21 Aug 2019 13:15:49 +0300	[thread overview]
Message-ID: <1566382555-12102-10-git-send-email-robert.chiras@nxp.com> (raw)
In-Reply-To: <1566382555-12102-1-git-send-email-robert.chiras@nxp.com>

Because of stability issues, we may want to limit the maximum bandwidth
required by the MXSFB (eLCDIF) driver.

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c | 48 +++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/mxsfb/mxsfb_drv.h |  2 ++
 2 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index f51c8a3..deb5e2b 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -161,6 +161,49 @@ static const struct drm_mode_config_helper_funcs mxsfb_mode_config_helpers = {
 	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
 };
 
+enum drm_mode_status mxsfb_pipe_mode_valid(struct drm_crtc *crtc,
+					   const struct drm_display_mode *mode)
+{
+	struct drm_simple_display_pipe *pipe =
+		container_of(crtc, struct drm_simple_display_pipe, crtc);
+	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	u32 bpp;
+	u64 bw;
+
+	if (!pipe->plane.state->fb)
+		bpp = 32;
+	else
+		bpp = pipe->plane.state->fb->format->depth;
+
+	bw = mode->crtc_clock * 1000;
+	bw = bw * mode->hdisplay * mode->vdisplay * (bpp / 8);
+	bw = div_u64(bw, mode->htotal * mode->vtotal);
+
+	if (mxsfb->max_bw && (bw > mxsfb->max_bw))
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+static int mxsfb_pipe_check(struct drm_simple_display_pipe *pipe,
+			    struct drm_plane_state *plane_state,
+			    struct drm_crtc_state *crtc_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+
+	/* force 'mode_changed' when fb pitches changed, since
+	 * the pitch related registers configuration of LCDIF
+	 * can not be done when LCDIF is running.
+	 */
+	if (old_fb && likely(!crtc_state->mode_changed)) {
+		if (old_fb->pitches[0] != fb->pitches[0])
+			crtc_state->mode_changed = true;
+	}
+
+	return 0;
+}
+
 static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
@@ -251,6 +294,8 @@ static void mxsfb_pipe_disable_vblank(struct drm_simple_display_pipe *pipe)
 }
 
 static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
+	.mode_valid	= mxsfb_pipe_mode_valid,
+	.check          = mxsfb_pipe_check,
 	.enable		= mxsfb_pipe_enable,
 	.disable	= mxsfb_pipe_disable,
 	.update		= mxsfb_pipe_update,
@@ -290,6 +335,9 @@ static int mxsfb_load(struct drm_device *drm, unsigned long flags)
 	if (IS_ERR(mxsfb->clk_disp_axi))
 		mxsfb->clk_disp_axi = NULL;
 
+	of_property_read_u32(drm->dev->of_node, "max-memory-bandwidth",
+			     &mxsfb->max_bw);
+
 	ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
index 8fb65d3..a178173 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -32,6 +32,8 @@ struct mxsfb_drm_private {
 	struct drm_connector		*connector;
 	struct drm_panel		*panel;
 	struct drm_bridge		*bridge;
+
+	u32				max_bw;
 };
 
 int mxsfb_setup_crtc(struct drm_device *dev);
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Robert Chiras <robert.chiras@nxp.com>
To: "Guido Günther" <agx@sigxcpu.org>, "Marek Vasut" <marex@denx.de>,
	"Stefan Agner" <stefan@agner.ch>,
	"David Airlie" <airlied@linux.ie>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 09/15] drm/mxsfb: Add max-memory-bandwidth property for MXSFB
Date: Wed, 21 Aug 2019 13:15:49 +0300	[thread overview]
Message-ID: <1566382555-12102-10-git-send-email-robert.chiras@nxp.com> (raw)
In-Reply-To: <1566382555-12102-1-git-send-email-robert.chiras@nxp.com>

Because of stability issues, we may want to limit the maximum bandwidth
required by the MXSFB (eLCDIF) driver.

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c | 48 +++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/mxsfb/mxsfb_drv.h |  2 ++
 2 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index f51c8a3..deb5e2b 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -161,6 +161,49 @@ static const struct drm_mode_config_helper_funcs mxsfb_mode_config_helpers = {
 	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
 };
 
+enum drm_mode_status mxsfb_pipe_mode_valid(struct drm_crtc *crtc,
+					   const struct drm_display_mode *mode)
+{
+	struct drm_simple_display_pipe *pipe =
+		container_of(crtc, struct drm_simple_display_pipe, crtc);
+	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	u32 bpp;
+	u64 bw;
+
+	if (!pipe->plane.state->fb)
+		bpp = 32;
+	else
+		bpp = pipe->plane.state->fb->format->depth;
+
+	bw = mode->crtc_clock * 1000;
+	bw = bw * mode->hdisplay * mode->vdisplay * (bpp / 8);
+	bw = div_u64(bw, mode->htotal * mode->vtotal);
+
+	if (mxsfb->max_bw && (bw > mxsfb->max_bw))
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+static int mxsfb_pipe_check(struct drm_simple_display_pipe *pipe,
+			    struct drm_plane_state *plane_state,
+			    struct drm_crtc_state *crtc_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+
+	/* force 'mode_changed' when fb pitches changed, since
+	 * the pitch related registers configuration of LCDIF
+	 * can not be done when LCDIF is running.
+	 */
+	if (old_fb && likely(!crtc_state->mode_changed)) {
+		if (old_fb->pitches[0] != fb->pitches[0])
+			crtc_state->mode_changed = true;
+	}
+
+	return 0;
+}
+
 static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
@@ -251,6 +294,8 @@ static void mxsfb_pipe_disable_vblank(struct drm_simple_display_pipe *pipe)
 }
 
 static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
+	.mode_valid	= mxsfb_pipe_mode_valid,
+	.check          = mxsfb_pipe_check,
 	.enable		= mxsfb_pipe_enable,
 	.disable	= mxsfb_pipe_disable,
 	.update		= mxsfb_pipe_update,
@@ -290,6 +335,9 @@ static int mxsfb_load(struct drm_device *drm, unsigned long flags)
 	if (IS_ERR(mxsfb->clk_disp_axi))
 		mxsfb->clk_disp_axi = NULL;
 
+	of_property_read_u32(drm->dev->of_node, "max-memory-bandwidth",
+			     &mxsfb->max_bw);
+
 	ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
index 8fb65d3..a178173 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -32,6 +32,8 @@ struct mxsfb_drm_private {
 	struct drm_connector		*connector;
 	struct drm_panel		*panel;
 	struct drm_bridge		*bridge;
+
+	u32				max_bw;
 };
 
 int mxsfb_setup_crtc(struct drm_device *dev);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-21 10:16 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 10:15 [PATCH v3 00/15] Improvements and fixes for mxsfb DRM driver Robert Chiras
2019-08-21 10:15 ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 01/15] drm/mxsfb: Update mxsfb to support a bridge Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 02/15] drm/mxsfb: Read bus flags from bridge if present Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 03/15] drm/mxsfb: Add defines for the rest of registers Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 04/15] drm/mxsfb: Reset vital registers for a proper initialization Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 05/15] drm/mxsfb: Update register definitions using bit manipulation defines Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 06/15] drm/mxsfb: Update mxsfb with additional pixel formats Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 07/15] drm/mxsfb: Fix the vblank events Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 08/15] drm/mxsfb: Signal mode changed when bpp changed Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` Robert Chiras [this message]
2019-08-21 10:15   ` [PATCH v3 09/15] drm/mxsfb: Add max-memory-bandwidth property for MXSFB Robert Chiras
2019-08-21 10:15 ` [PATCH v3 10/15] dt-bindings: display: Add max-memory-bandwidth property for mxsfb Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-27 17:25   ` Rob Herring
2019-08-27 17:25     ` Rob Herring
2019-08-21 10:15 ` [PATCH v3 11/15] drm/mxsfb: Update mxsfb to support LCD reset Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 12/15] drm/mxsfb: Improve the axi clock usage Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 13/15] drm/mxsfb: Clear OUTSTANDING_REQS bits Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 14/15] drm/mxsfb: Add support for horizontal stride Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-21 10:15 ` [PATCH v3 15/15] drm/mxsfb: Add support for live pixel format change Robert Chiras
2019-08-21 10:15   ` Robert Chiras
2019-08-26 12:05 ` [PATCH v3 00/15] Improvements and fixes for mxsfb DRM driver Guido Günther
2019-08-26 12:05   ` Guido Günther
2019-08-26 14:35   ` Stefan Agner
2019-08-26 14:35     ` Stefan Agner
2019-08-26 16:34     ` Guido Günther
2019-08-26 16:34       ` Guido Günther
2019-08-26 19:19     ` Leonard Crestez
2019-08-26 19:19       ` Leonard Crestez
2019-08-28  6:49       ` Robert Chiras
2019-08-28  6:49         ` Robert Chiras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566382555-12102-10-git-send-email-robert.chiras@nxp.com \
    --to=robert.chiras@nxp.com \
    --cc=agx@sigxcpu.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.