* [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 18:47 ` Aleksandar Markovic
` (2 more replies)
2020-01-31 0:02 ` [PATCH rc4 02/29] target/avr: Introduce AVR CPU class object Aleksandar Markovic
` (29 subsequent siblings)
30 siblings, 3 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes definitions of various basic parameters needed
for integration of a new platform into QEMU.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu-param.h | 37 ++++++++++++++++++++++++++
target/avr/cpu.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 109 insertions(+)
create mode 100644 target/avr/cpu-param.h
create mode 100644 target/avr/cpu.h
diff --git a/target/avr/cpu-param.h b/target/avr/cpu-param.h
new file mode 100644
index 0000000..0c29ce4
--- /dev/null
+++ b/target/avr/cpu-param.h
@@ -0,0 +1,37 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#ifndef AVR_CPU_PARAM_H
+#define AVR_CPU_PARAM_H
+
+#define TARGET_LONG_BITS 32
+/*
+ * TARGET_PAGE_BITS cannot be more than 8 bits because
+ * 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they
+ * should be implemented as a device and not memory
+ * 2. SRAM starts at the address 0x0100
+ */
+#define TARGET_PAGE_BITS 8
+#define TARGET_PHYS_ADDR_SPACE_BITS 24
+#define TARGET_VIRT_ADDR_SPACE_BITS 24
+#define NB_MMU_MODES 2
+
+
+#endif
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
new file mode 100644
index 0000000..d122611
--- /dev/null
+++ b/target/avr/cpu.h
@@ -0,0 +1,72 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#ifndef QEMU_AVR_CPU_H
+#define QEMU_AVR_CPU_H
+
+#include "cpu-qom.h"
+#include "exec/cpu-defs.h"
+
+#define TCG_GUEST_DEFAULT_MO 0
+#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU
+#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX)
+#define CPU_RESOLVING_TYPE TYPE_AVR_CPU
+
+/*
+ * AVR has two memory spaces, data & code.
+ * e.g. both have 0 address
+ * ST/LD instructions access data space
+ * LPM/SPM and instruction fetching access code memory space
+ */
+#define MMU_CODE_IDX 0
+#define MMU_DATA_IDX 1
+
+#define EXCP_RESET 1
+#define EXCP_INT(n) (EXCP_RESET + (n) + 1)
+
+/* Number of CPU registers */
+#define NUMBER_OF_CPU_REGISTERS 32
+/* Number of IO registers accessible by ld/st/in/out */
+#define NUMBER_OF_IO_REGISTERS 64
+
+/*
+ * Offsets of AVR memory regions in host memory space.
+ *
+ * This is needed because the AVR has separate code and data address
+ * spaces that both have start from zero but have to go somewhere in
+ * host memory.
+ *
+ * It's also useful to know where some things are, like the IO registers.
+ */
+/* Flash program memory */
+#define OFFSET_CODE 0x00000000
+/* CPU registers, IO registers, and SRAM */
+#define OFFSET_DATA 0x00800000
+/* CPU registers specifically, these are mapped at the start of data */
+#define OFFSET_CPU_REGISTERS OFFSET_DATA
+/*
+ * IO registers, including status register, stack pointer, and memory
+ * mapped peripherals, mapped just after CPU registers
+ */
+#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS)
+
+#define EF_AVR_MACH 0x7F
+
+#endif /* !defined (QEMU_AVR_CPU_H) */
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform
2020-01-31 0:02 ` [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform Aleksandar Markovic
@ 2020-01-31 18:47 ` Aleksandar Markovic
2020-01-31 19:23 ` Aleksandar Markovic
2020-01-31 20:07 ` Aleksandar Markovic
2 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 18:47 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 5579 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> This includes definitions of various basic parameters needed
> for integration of a new platform into QEMU.
>
> [AM: Split a larger AVR introduction patch into logical units]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Acked-by: Igor Mammedov <imammedo@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> target/avr/cpu-param.h | 37 ++++++++++++++++++++++++++
> target/avr/cpu.h | 72 ++++++++++++++++++++++++++++++
> ++++++++++++++++++++
> 2 files changed, 109 insertions(+)
> create mode 100644 target/avr/cpu-param.h
> create mode 100644 target/avr/cpu.h
>
> diff --git a/target/avr/cpu-param.h b/target/avr/cpu-param.h
> new file mode 100644
> index 0000000..0c29ce4
> --- /dev/null
> +++ b/target/avr/cpu-param.h
> @@ -0,0 +1,37 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef AVR_CPU_PARAM_H
> +#define AVR_CPU_PARAM_H
> +
> +#define TARGET_LONG_BITS 32
> +/*
> + * TARGET_PAGE_BITS cannot be more than 8 bits because
> + * 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they
> + * should be implemented as a device and not memory
> + * 2. SRAM starts at the address 0x0100
> + */
> +#define TARGET_PAGE_BITS 8
> +#define TARGET_PHYS_ADDR_SPACE_BITS 24
> +#define TARGET_VIRT_ADDR_SPACE_BITS 24
> +#define NB_MMU_MODES 2
> +
> +
> +#endif
> diff --git a/target/avr/cpu.h b/target/avr/cpu.h
> new file mode 100644
> index 0000000..d122611
> --- /dev/null
> +++ b/target/avr/cpu.h
> @@ -0,0 +1,72 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef QEMU_AVR_CPU_H
> +#define QEMU_AVR_CPU_H
> +
> +#include "cpu-qom.h"
This line should be a part of the next patch.
> +#include "exec/cpu-defs.h"
> +
> +#define TCG_GUEST_DEFAULT_MO 0
> +#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU
> +#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX)
> +#define CPU_RESOLVING_TYPE TYPE_AVR_CPU
Last three lines should be a part of the next patch.
+
> +/*
> + * AVR has two memory spaces, data & code.
> + * e.g. both have 0 address
> + * ST/LD instructions access data space
> + * LPM/SPM and instruction fetching access code memory space
> + */
> +#define MMU_CODE_IDX 0
> +#define MMU_DATA_IDX 1
> +
> +#define EXCP_RESET 1
> +#define EXCP_INT(n) (EXCP_RESET + (n) + 1)
> +
> +/* Number of CPU registers */
> +#define NUMBER_OF_CPU_REGISTERS 32
> +/* Number of IO registers accessible by ld/st/in/out */
> +#define NUMBER_OF_IO_REGISTERS 64
> +
> +/*
> + * Offsets of AVR memory regions in host memory space.
> + *
> + * This is needed because the AVR has separate code and data address
> + * spaces that both have start from zero but have to go somewhere in
> + * host memory.
> + *
> + * It's also useful to know where some things are, like the IO registers.
> + */
> +/* Flash program memory */
> +#define OFFSET_CODE 0x00000000
> +/* CPU registers, IO registers, and SRAM */
> +#define OFFSET_DATA 0x00800000
> +/* CPU registers specifically, these are mapped at the start of data */
> +#define OFFSET_CPU_REGISTERS OFFSET_DATA
> +/*
> + * IO registers, including status register, stack pointer, and memory
> + * mapped peripherals, mapped just after CPU registers
> + */
> +#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS)
> +
> +#define EF_AVR_MACH 0x7F
> +
> +#endif /* !defined (QEMU_AVR_CPU_H) */
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 7103 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform
2020-01-31 0:02 ` [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform Aleksandar Markovic
2020-01-31 18:47 ` Aleksandar Markovic
@ 2020-01-31 19:23 ` Aleksandar Markovic
2020-01-31 20:07 ` Aleksandar Markovic
2 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 19:23 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 5567 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> This includes definitions of various basic parameters needed
> for integration of a new platform into QEMU.
>
> [AM: Split a larger AVR introduction patch into logical units]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Acked-by: Igor Mammedov <imammedo@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> target/avr/cpu-param.h | 37 ++++++++++++++++++++++++++
> target/avr/cpu.h | 72 ++++++++++++++++++++++++++++++
> ++++++++++++++++++++
> 2 files changed, 109 insertions(+)
> create mode 100644 target/avr/cpu-param.h
> create mode 100644 target/avr/cpu.h
>
> diff --git a/target/avr/cpu-param.h b/target/avr/cpu-param.h
> new file mode 100644
> index 0000000..0c29ce4
> --- /dev/null
> +++ b/target/avr/cpu-param.h
> @@ -0,0 +1,37 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef AVR_CPU_PARAM_H
> +#define AVR_CPU_PARAM_H
> +
> +#define TARGET_LONG_BITS 32
> +/*
> + * TARGET_PAGE_BITS cannot be more than 8 bits because
> + * 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they
> + * should be implemented as a device and not memory
> + * 2. SRAM starts at the address 0x0100
> + */
> +#define TARGET_PAGE_BITS 8
> +#define TARGET_PHYS_ADDR_SPACE_BITS 24
> +#define TARGET_VIRT_ADDR_SPACE_BITS 24
> +#define NB_MMU_MODES 2
> +
> +
> +#endif
> diff --git a/target/avr/cpu.h b/target/avr/cpu.h
> new file mode 100644
> index 0000000..d122611
> --- /dev/null
> +++ b/target/avr/cpu.h
> @@ -0,0 +1,72 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef QEMU_AVR_CPU_H
> +#define QEMU_AVR_CPU_H
> +
> +#include "cpu-qom.h"
> +#include "exec/cpu-defs.h"
> +
> +#define TCG_GUEST_DEFAULT_MO 0
> +#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU
> +#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX)
> +#define CPU_RESOLVING_TYPE TYPE_AVR_CPU
> +
> +/*
> + * AVR has two memory spaces, data & code.
> + * e.g. both have 0 address
> + * ST/LD instructions access data space
> + * LPM/SPM and instruction fetching access code memory space
> + */
> +#define MMU_CODE_IDX 0
> +#define MMU_DATA_IDX 1
> +
> +#define EXCP_RESET 1
> +#define EXCP_INT(n) (EXCP_RESET + (n) + 1)
> +
> +/* Number of CPU registers */
> +#define NUMBER_OF_CPU_REGISTERS 32
> +/* Number of IO registers accessible by ld/st/in/out */
> +#define NUMBER_OF_IO_REGISTERS 64
> +
> +/*
> + * Offsets of AVR memory regions in host memory space.
> + *
> + * This is needed because the AVR has separate code and data address
> + * spaces that both have start from zero but have to go somewhere in
> + * host memory.
> + *
> + * It's also useful to know where some things are, like the IO registers.
> + */
> +/* Flash program memory */
> +#define OFFSET_CODE 0x00000000
> +/* CPU registers, IO registers, and SRAM */
> +#define OFFSET_DATA 0x00800000
> +/* CPU registers specifically, these are mapped at the start of data */
> +#define OFFSET_CPU_REGISTERS OFFSET_DATA
> +/*
> + * IO registers, including status register, stack pointer, and memory
> + * mapped peripherals, mapped just after CPU registers
> + */
> +#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS)
> +
> +#define EF_AVR_MACH 0x7F
This line seems to belong more to patch 6, where it basically extracts bits
6..0 from e_flags.
+
> +#endif /* !defined (QEMU_AVR_CPU_H) */
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 6948 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform
2020-01-31 0:02 ` [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform Aleksandar Markovic
2020-01-31 18:47 ` Aleksandar Markovic
2020-01-31 19:23 ` Aleksandar Markovic
@ 2020-01-31 20:07 ` Aleksandar Markovic
2 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 20:07 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Sarah Harris, Pavel Dovgalyuk, Richard Henderson, qemu-devel,
Philippe Mathieu-Daudé,
Michael Rolnik, Igor Mammedov, Philippe Mathieu-Daudé
[-- Attachment #1: Type: text/plain, Size: 6059 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> This includes definitions of various basic parameters needed
> for integration of a new platform into QEMU.
>
>
Hi, all.
Just to keep everyone in the loop:
I'll try to put together rc5 in next few days, with a number of relatvely
minor changes (Alex/Philippe improvments and some more). Let me know if
this doesn't work for you for any reason.
Igor, a special question to you:
You already gave Acked-by for former patch 1, which is now transformed to
patches 1-6. I gather you are familiar with all topics involved. Could you
perhaps taje a closer look at patches 1-6 now, and, if you are happy with
what you see, perhaps you can give Reviewed-by to them?
Thanks, Aleksandar
> [AM: Split a larger AVR introduction patch into logical units]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Acked-by: Igor Mammedov <imammedo@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> target/avr/cpu-param.h | 37 ++++++++++++++++++++++++++
> target/avr/cpu.h | 72 ++++++++++++++++++++++++++++++
> ++++++++++++++++++++
> 2 files changed, 109 insertions(+)
> create mode 100644 target/avr/cpu-param.h
> create mode 100644 target/avr/cpu.h
>
> diff --git a/target/avr/cpu-param.h b/target/avr/cpu-param.h
> new file mode 100644
> index 0000000..0c29ce4
> --- /dev/null
> +++ b/target/avr/cpu-param.h
> @@ -0,0 +1,37 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef AVR_CPU_PARAM_H
> +#define AVR_CPU_PARAM_H
> +
> +#define TARGET_LONG_BITS 32
> +/*
> + * TARGET_PAGE_BITS cannot be more than 8 bits because
> + * 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they
> + * should be implemented as a device and not memory
> + * 2. SRAM starts at the address 0x0100
> + */
> +#define TARGET_PAGE_BITS 8
> +#define TARGET_PHYS_ADDR_SPACE_BITS 24
> +#define TARGET_VIRT_ADDR_SPACE_BITS 24
> +#define NB_MMU_MODES 2
> +
> +
> +#endif
> diff --git a/target/avr/cpu.h b/target/avr/cpu.h
> new file mode 100644
> index 0000000..d122611
> --- /dev/null
> +++ b/target/avr/cpu.h
> @@ -0,0 +1,72 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +#ifndef QEMU_AVR_CPU_H
> +#define QEMU_AVR_CPU_H
> +
> +#include "cpu-qom.h"
> +#include "exec/cpu-defs.h"
> +
> +#define TCG_GUEST_DEFAULT_MO 0
> +#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU
> +#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX)
> +#define CPU_RESOLVING_TYPE TYPE_AVR_CPU
> +
> +/*
> + * AVR has two memory spaces, data & code.
> + * e.g. both have 0 address
> + * ST/LD instructions access data space
> + * LPM/SPM and instruction fetching access code memory space
> + */
> +#define MMU_CODE_IDX 0
> +#define MMU_DATA_IDX 1
> +
> +#define EXCP_RESET 1
> +#define EXCP_INT(n) (EXCP_RESET + (n) + 1)
> +
> +/* Number of CPU registers */
> +#define NUMBER_OF_CPU_REGISTERS 32
> +/* Number of IO registers accessible by ld/st/in/out */
> +#define NUMBER_OF_IO_REGISTERS 64
> +
> +/*
> + * Offsets of AVR memory regions in host memory space.
> + *
> + * This is needed because the AVR has separate code and data address
> + * spaces that both have start from zero but have to go somewhere in
> + * host memory.
> + *
> + * It's also useful to know where some things are, like the IO registers.
> + */
> +/* Flash program memory */
> +#define OFFSET_CODE 0x00000000
> +/* CPU registers, IO registers, and SRAM */
> +#define OFFSET_DATA 0x00800000
> +/* CPU registers specifically, these are mapped at the start of data */
> +#define OFFSET_CPU_REGISTERS OFFSET_DATA
> +/*
> + * IO registers, including status register, stack pointer, and memory
> + * mapped peripherals, mapped just after CPU registers
> + */
> +#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS)
> +
> +#define EF_AVR_MACH 0x7F
> +
> +#endif /* !defined (QEMU_AVR_CPU_H) */
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 7566 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 02/29] target/avr: Introduce AVR CPU class object
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 03/29] target/avr: Add migration support Aleksandar Markovic
` (28 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This patch introduces AVR CPU class object and its basic elements
and functions.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu-qom.h | 54 +++++++++++++
target/avr/cpu.c | 212 +++++++++++++++++++++++++++++++++++++++++++++++++++
target/avr/cpu.h | 136 +++++++++++++++++++++++++++++++++
target/avr/helper.c | 139 +++++++++++++++++++++++++++++++++
4 files changed, 541 insertions(+)
create mode 100644 target/avr/cpu-qom.h
create mode 100644 target/avr/cpu.c
create mode 100644 target/avr/helper.c
diff --git a/target/avr/cpu-qom.h b/target/avr/cpu-qom.h
new file mode 100644
index 0000000..e28b58c
--- /dev/null
+++ b/target/avr/cpu-qom.h
@@ -0,0 +1,54 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#ifndef QEMU_AVR_QOM_H
+#define QEMU_AVR_QOM_H
+
+#include "hw/core/cpu.h"
+
+#define TYPE_AVR_CPU "avr-cpu"
+
+#define AVR_CPU_CLASS(klass) \
+ OBJECT_CLASS_CHECK(AVRCPUClass, (klass), TYPE_AVR_CPU)
+#define AVR_CPU(obj) \
+ OBJECT_CHECK(AVRCPU, (obj), TYPE_AVR_CPU)
+#define AVR_CPU_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(AVRCPUClass, (obj), TYPE_AVR_CPU)
+
+/**
+ * AVRCPUClass:
+ * @parent_realize: The parent class' realize handler.
+ * @parent_reset: The parent class' reset handler.
+ * @vr: Version Register value.
+ *
+ * A AVR CPU model.
+ */
+typedef struct AVRCPUClass {
+ /*< private >*/
+ CPUClass parent_class;
+ /*< public >*/
+ DeviceRealize parent_realize;
+ void (*parent_reset)(CPUState *cpu);
+} AVRCPUClass;
+
+typedef struct AVRCPU AVRCPU;
+
+
+#endif /* !defined (QEMU_AVR_CPU_QOM_H) */
diff --git a/target/avr/cpu.c b/target/avr/cpu.c
new file mode 100644
index 0000000..beda91e
--- /dev/null
+++ b/target/avr/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/qemu-print.h"
+#include "exec/exec-all.h"
+#include "cpu.h"
+#include "disas/dis-asm.h"
+
+static void avr_cpu_set_pc(CPUState *cs, vaddr value)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+
+ cpu->env.pc_w = value / 2; /* internally PC points to words */
+}
+
+static bool avr_cpu_has_work(CPUState *cs)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ return (cs->interrupt_request & (CPU_INTERRUPT_HARD | CPU_INTERRUPT_RESET))
+ && cpu_interrupts_enabled(env);
+}
+
+static void avr_cpu_synchronize_from_tb(CPUState *cs, TranslationBlock *tb)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ env->pc_w = tb->pc / 2; /* internally PC points to words */
+}
+
+static void avr_cpu_reset(CPUState *cs)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ AVRCPUClass *mcc = AVR_CPU_GET_CLASS(cpu);
+ CPUAVRState *env = &cpu->env;
+
+ mcc->parent_reset(cs);
+
+ env->pc_w = 0;
+ env->sregI = 1;
+ env->sregC = 0;
+ env->sregZ = 0;
+ env->sregN = 0;
+ env->sregV = 0;
+ env->sregS = 0;
+ env->sregH = 0;
+ env->sregT = 0;
+
+ env->rampD = 0;
+ env->rampX = 0;
+ env->rampY = 0;
+ env->rampZ = 0;
+ env->eind = 0;
+ env->sp = 0;
+
+ env->skip = 0;
+
+ memset(env->r, 0, sizeof(env->r));
+
+ tlb_flush(cs);
+}
+
+static void avr_cpu_disas_set_info(CPUState *cpu, disassemble_info *info)
+{
+ info->mach = bfd_arch_avr;
+ info->print_insn = NULL;
+}
+
+static void avr_cpu_realizefn(DeviceState *dev, Error **errp)
+{
+ CPUState *cs = CPU(dev);
+ AVRCPUClass *mcc = AVR_CPU_GET_CLASS(dev);
+ Error *local_err = NULL;
+
+ cpu_exec_realizefn(cs, &local_err);
+ if (local_err != NULL) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ qemu_init_vcpu(cs);
+ cpu_reset(cs);
+
+ mcc->parent_realize(dev, errp);
+}
+
+static void avr_cpu_set_int(void *opaque, int irq, int level)
+{
+ AVRCPU *cpu = opaque;
+ CPUAVRState *env = &cpu->env;
+ CPUState *cs = CPU(cpu);
+
+ uint64_t mask = (1ull << irq);
+ if (level) {
+ env->intsrc |= mask;
+ cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+ } else {
+ env->intsrc &= ~mask;
+ if (env->intsrc == 0) {
+ cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+ }
+ }
+}
+
+static void avr_cpu_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+
+ cpu_set_cpustate_pointers(cpu);
+
+ /* Set the number of interrupts supported by the CPU. */
+ qdev_init_gpio_in(DEVICE(cpu), avr_cpu_set_int,
+ sizeof(cpu->env.intsrc) * 8);
+}
+
+static ObjectClass *avr_cpu_class_by_name(const char *cpu_model)
+{
+ ObjectClass *oc;
+
+ oc = object_class_by_name(cpu_model);
+ if (object_class_dynamic_cast(oc, TYPE_AVR_CPU) == NULL ||
+ object_class_is_abstract(oc)) {
+ oc = NULL;
+ }
+ return oc;
+}
+
+static void avr_cpu_dump_state(CPUState *cs, FILE *f, int flags)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+ int i;
+
+ qemu_fprintf(f, "\n");
+ qemu_fprintf(f, "PC: %06x\n", env->pc_w);
+ qemu_fprintf(f, "SP: %04x\n", env->sp);
+ qemu_fprintf(f, "rampD: %02x\n", env->rampD >> 16);
+ qemu_fprintf(f, "rampX: %02x\n", env->rampX >> 16);
+ qemu_fprintf(f, "rampY: %02x\n", env->rampY >> 16);
+ qemu_fprintf(f, "rampZ: %02x\n", env->rampZ >> 16);
+ qemu_fprintf(f, "EIND: %02x\n", env->eind >> 16);
+ qemu_fprintf(f, "X: %02x%02x\n", env->r[27], env->r[26]);
+ qemu_fprintf(f, "Y: %02x%02x\n", env->r[29], env->r[28]);
+ qemu_fprintf(f, "Z: %02x%02x\n", env->r[31], env->r[30]);
+ qemu_fprintf(f, "SREG: [ %c %c %c %c %c %c %c %c ]\n",
+ env->sregI ? 'I' : '-',
+ env->sregT ? 'T' : '-',
+ env->sregH ? 'H' : '-',
+ env->sregS ? 'S' : '-',
+ env->sregV ? 'V' : '-',
+ env->sregN ? '-' : 'N', /* Zf has negative logic */
+ env->sregZ ? 'Z' : '-',
+ env->sregC ? 'I' : '-');
+ qemu_fprintf(f, "SKIP: %02x\n", env->skip);
+
+ qemu_fprintf(f, "\n");
+ for (i = 0; i < ARRAY_SIZE(env->r); i++) {
+ qemu_fprintf(f, "R[%02d]: %02x ", i, env->r[i]);
+
+ if ((i % 8) == 7) {
+ qemu_fprintf(f, "\n");
+ }
+ }
+ qemu_fprintf(f, "\n");
+}
+
+static void avr_cpu_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ CPUClass *cc = CPU_CLASS(oc);
+ AVRCPUClass *mcc = AVR_CPU_CLASS(oc);
+
+ mcc->parent_realize = dc->realize;
+ dc->realize = avr_cpu_realizefn;
+
+ mcc->parent_reset = cc->reset;
+ cc->reset = avr_cpu_reset;
+
+ cc->class_by_name = avr_cpu_class_by_name;
+
+ cc->has_work = avr_cpu_has_work;
+ cc->do_interrupt = avr_cpu_do_interrupt;
+ cc->cpu_exec_interrupt = avr_cpu_exec_interrupt;
+ cc->dump_state = avr_cpu_dump_state;
+ cc->set_pc = avr_cpu_set_pc;
+ cc->memory_rw_debug = avr_cpu_memory_rw_debug;
+ cc->get_phys_page_debug = avr_cpu_get_phys_page_debug;
+ cc->disas_set_info = avr_cpu_disas_set_info;
+ cc->tlb_fill = avr_cpu_tlb_fill;
+ cc->tcg_initialize = avr_cpu_tcg_init;
+ cc->synchronize_from_tb = avr_cpu_synchronize_from_tb;
+}
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
index d122611..08f4415 100644
--- a/target/avr/cpu.h
+++ b/target/avr/cpu.h
@@ -24,6 +24,10 @@
#include "cpu-qom.h"
#include "exec/cpu-defs.h"
+#ifdef CONFIG_USER_ONLY
+#error "AVR 8-bit does not support user mode"
+#endif
+
#define TCG_GUEST_DEFAULT_MO 0
#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU
#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX)
@@ -69,4 +73,136 @@
#define EF_AVR_MACH 0x7F
+typedef struct CPUAVRState CPUAVRState;
+
+struct CPUAVRState {
+ uint32_t pc_w; /* 0x003fffff up to 22 bits */
+
+ uint32_t sregC; /* 0x00000001 1 bit */
+ uint32_t sregZ; /* 0x00000001 1 bit */
+ uint32_t sregN; /* 0x00000001 1 bit */
+ uint32_t sregV; /* 0x00000001 1 bit */
+ uint32_t sregS; /* 0x00000001 1 bit */
+ uint32_t sregH; /* 0x00000001 1 bit */
+ uint32_t sregT; /* 0x00000001 1 bit */
+ uint32_t sregI; /* 0x00000001 1 bit */
+
+ uint32_t rampD; /* 0x00ff0000 8 bits */
+ uint32_t rampX; /* 0x00ff0000 8 bits */
+ uint32_t rampY; /* 0x00ff0000 8 bits */
+ uint32_t rampZ; /* 0x00ff0000 8 bits */
+ uint32_t eind; /* 0x00ff0000 8 bits */
+
+ uint32_t r[NUMBER_OF_CPU_REGISTERS]; /* 8 bits each */
+ uint32_t sp; /* 16 bits */
+
+ uint32_t skip; /* if set skip instruction */
+
+ uint64_t intsrc; /* interrupt sources */
+ bool fullacc; /* CPU/MEM if true MEM only otherwise */
+
+ uint64_t features;
+};
+
+/**
+ * AVRCPU:
+ * @env: #CPUAVRState
+ *
+ * A AVR CPU.
+ */
+typedef struct AVRCPU {
+ /*< private >*/
+ CPUState parent_obj;
+ /*< public >*/
+
+ CPUNegativeOffsetState neg;
+ CPUAVRState env;
+} AVRCPU;
+
+void avr_cpu_do_interrupt(CPUState *cpu);
+bool avr_cpu_exec_interrupt(CPUState *cpu, int int_req);
+hwaddr avr_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
+
+#define cpu_list avr_cpu_list
+#define cpu_signal_handler cpu_avr_signal_handler
+#define cpu_mmu_index avr_cpu_mmu_index
+
+static inline int avr_cpu_mmu_index(CPUAVRState *env, bool ifetch)
+{
+ return ifetch ? MMU_CODE_IDX : MMU_DATA_IDX;
+}
+
+void avr_cpu_tcg_init(void);
+
+void avr_cpu_list(void);
+int cpu_avr_exec(CPUState *cpu);
+int cpu_avr_signal_handler(int host_signum, void *pinfo, void *puc);
+int avr_cpu_memory_rw_debug(CPUState *cs, vaddr address, uint8_t *buf,
+ int len, bool is_write);
+
+enum {
+ TB_FLAGS_FULL_ACCESS = 1,
+ TB_FLAGS_SKIP = 2,
+};
+
+static inline void cpu_get_tb_cpu_state(CPUAVRState *env, target_ulong *pc,
+ target_ulong *cs_base, uint32_t *pflags)
+{
+ uint32_t flags = 0;
+
+ *pc = env->pc_w * 2;
+ *cs_base = 0;
+
+ if (env->fullacc) {
+ flags |= TB_FLAGS_FULL_ACCESS;
+ }
+ if (env->skip) {
+ flags |= TB_FLAGS_SKIP;
+ }
+
+ *pflags = flags;
+}
+
+static inline int cpu_interrupts_enabled(CPUAVRState *env)
+{
+ return env->sregI != 0;
+}
+
+static inline uint8_t cpu_get_sreg(CPUAVRState *env)
+{
+ uint8_t sreg;
+ sreg = (env->sregC) << 0
+ | (env->sregZ) << 1
+ | (env->sregN) << 2
+ | (env->sregV) << 3
+ | (env->sregS) << 4
+ | (env->sregH) << 5
+ | (env->sregT) << 6
+ | (env->sregI) << 7;
+ return sreg;
+}
+
+static inline void cpu_set_sreg(CPUAVRState *env, uint8_t sreg)
+{
+ env->sregC = (sreg >> 0) & 0x01;
+ env->sregZ = (sreg >> 1) & 0x01;
+ env->sregN = (sreg >> 2) & 0x01;
+ env->sregV = (sreg >> 3) & 0x01;
+ env->sregS = (sreg >> 4) & 0x01;
+ env->sregH = (sreg >> 5) & 0x01;
+ env->sregT = (sreg >> 6) & 0x01;
+ env->sregI = (sreg >> 7) & 0x01;
+}
+
+bool avr_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+ MMUAccessType access_type, int mmu_idx,
+ bool probe, uintptr_t retaddr);
+
+typedef CPUAVRState CPUArchState;
+typedef AVRCPU ArchCPU;
+
+#include "exec/cpu-all.h"
+
+const char *avr_flags_to_cpu_type(uint32_t flags, const char *def_cpu_type);
+
#endif /* !defined (QEMU_AVR_CPU_H) */
diff --git a/target/avr/helper.c b/target/avr/helper.c
new file mode 100644
index 0000000..354def2
--- /dev/null
+++ b/target/avr/helper.c
@@ -0,0 +1,139 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "exec/exec-all.h"
+#include "exec/helper-proto.h"
+
+bool avr_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
+{
+ bool ret = false;
+ CPUClass *cc = CPU_GET_CLASS(cs);
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ if (interrupt_request & CPU_INTERRUPT_RESET) {
+ if (cpu_interrupts_enabled(env)) {
+ cs->exception_index = EXCP_RESET;
+ cc->do_interrupt(cs);
+
+ cs->interrupt_request &= ~CPU_INTERRUPT_RESET;
+
+ ret = true;
+ }
+ }
+ if (interrupt_request & CPU_INTERRUPT_HARD) {
+ if (cpu_interrupts_enabled(env) && env->intsrc != 0) {
+ int index = ctz32(env->intsrc);
+ cs->exception_index = EXCP_INT(index);
+ cc->do_interrupt(cs);
+
+ env->intsrc &= env->intsrc - 1; /* clear the interrupt */
+ cs->interrupt_request &= ~CPU_INTERRUPT_HARD;
+
+ ret = true;
+ }
+ }
+ return ret;
+}
+
+void avr_cpu_do_interrupt(CPUState *cs)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ uint32_t ret = env->pc_w;
+ int vector = 0;
+ int size = avr_feature(env, AVR_FEATURE_JMP_CALL) ? 2 : 1;
+ int base = 0;
+
+ if (cs->exception_index == EXCP_RESET) {
+ vector = 0;
+ } else if (env->intsrc != 0) {
+ vector = ctz32(env->intsrc) + 1;
+ }
+
+ if (avr_feature(env, AVR_FEATURE_3_BYTE_PC)) {
+ cpu_stb_data(env, env->sp--, (ret & 0x0000ff));
+ cpu_stb_data(env, env->sp--, (ret & 0x00ff00) >> 8);
+ cpu_stb_data(env, env->sp--, (ret & 0xff0000) >> 16);
+ } else if (avr_feature(env, AVR_FEATURE_2_BYTE_PC)) {
+ cpu_stb_data(env, env->sp--, (ret & 0x0000ff));
+ cpu_stb_data(env, env->sp--, (ret & 0x00ff00) >> 8);
+ } else {
+ cpu_stb_data(env, env->sp--, (ret & 0x0000ff));
+ }
+
+ env->pc_w = base + vector * size;
+ env->sregI = 0; /* clear Global Interrupt Flag */
+
+ cs->exception_index = -1;
+}
+
+int avr_cpu_memory_rw_debug(CPUState *cs, vaddr addr, uint8_t *buf,
+ int len, bool is_write)
+{
+ return cpu_memory_rw_debug(cs, addr, buf, len, is_write);
+}
+
+hwaddr avr_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
+{
+ return addr; /* I assume 1:1 address correspondance */
+}
+
+bool avr_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+ MMUAccessType access_type, int mmu_idx,
+ bool probe, uintptr_t retaddr)
+{
+ int prot = 0;
+ MemTxAttrs attrs = {};
+ uint32_t paddr;
+
+ address &= TARGET_PAGE_MASK;
+
+ if (mmu_idx == MMU_CODE_IDX) {
+ /* access to code in flash */
+ paddr = OFFSET_CODE + address;
+ prot = PAGE_READ | PAGE_EXEC;
+ if (paddr + TARGET_PAGE_SIZE > OFFSET_DATA) {
+ error_report("execution left flash memory");
+ exit(1);
+ }
+ } else if (address < NUMBER_OF_CPU_REGISTERS + NUMBER_OF_IO_REGISTERS) {
+ /*
+ * access to CPU registers, exit and rebuilt this TB to use full access
+ * incase it touches specially handled registers like SREG or SP
+ */
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+ env->fullacc = 1;
+ cpu_loop_exit_restore(cs, retaddr);
+ } else {
+ /* access to memory. nothing special */
+ paddr = OFFSET_DATA + address;
+ prot = PAGE_READ | PAGE_WRITE;
+ }
+
+ tlb_set_page_with_attrs(
+ cs, address, paddr, attrs, prot, mmu_idx, TARGET_PAGE_SIZE);
+
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 03/29] target/avr: Add migration support
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 01/29] target/avr: Add basic parameters for new AVR platform Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 02/29] target/avr: Introduce AVR CPU class object Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 04/29] target/avr: Add GDB support Aleksandar Markovic
` (27 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Add migration functions for AVR cores.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu.c | 1 +
target/avr/cpu.h | 2 +
target/avr/machine.c | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 124 insertions(+)
create mode 100644 target/avr/machine.c
diff --git a/target/avr/cpu.c b/target/avr/cpu.c
index beda91e..49e32af 100644
--- a/target/avr/cpu.c
+++ b/target/avr/cpu.c
@@ -205,6 +205,7 @@ static void avr_cpu_class_init(ObjectClass *oc, void *data)
cc->set_pc = avr_cpu_set_pc;
cc->memory_rw_debug = avr_cpu_memory_rw_debug;
cc->get_phys_page_debug = avr_cpu_get_phys_page_debug;
+ cc->vmsd = &vms_avr_cpu;
cc->disas_set_info = avr_cpu_disas_set_info;
cc->tlb_fill = avr_cpu_tlb_fill;
cc->tcg_initialize = avr_cpu_tcg_init;
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
index 08f4415..2907a37 100644
--- a/target/avr/cpu.h
+++ b/target/avr/cpu.h
@@ -119,6 +119,8 @@ typedef struct AVRCPU {
CPUAVRState env;
} AVRCPU;
+extern const struct VMStateDescription vms_avr_cpu;
+
void avr_cpu_do_interrupt(CPUState *cpu);
bool avr_cpu_exec_interrupt(CPUState *cpu, int int_req);
hwaddr avr_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
diff --git a/target/avr/machine.c b/target/avr/machine.c
new file mode 100644
index 0000000..ba44bd0
--- /dev/null
+++ b/target/avr/machine.c
@@ -0,0 +1,121 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "migration/cpu.h"
+
+static int get_sreg(QEMUFile *f, void *opaque, size_t size,
+ const VMStateField *field)
+{
+ CPUAVRState *env = opaque;
+ uint8_t sreg;
+
+ sreg = qemu_get_byte(f);
+ cpu_set_sreg(env, sreg);
+ return 0;
+}
+
+static int put_sreg(
+ QEMUFile *f, void *opaque, size_t size,
+ const VMStateField *field, QJSON *vmdesc)
+{
+ CPUAVRState *env = opaque;
+ uint8_t sreg = cpu_get_sreg(env);
+
+ qemu_put_byte(f, sreg);
+ return 0;
+}
+
+static const VMStateInfo vms_sreg = {
+ .name = "sreg",
+ .get = get_sreg,
+ .put = put_sreg,
+};
+
+static int get_segment(
+ QEMUFile *f, void *opaque, size_t size, const VMStateField *field)
+{
+ uint32_t *ramp = opaque;
+ uint8_t temp;
+
+ temp = qemu_get_byte(f);
+ *ramp = ((uint32_t)temp) << 16;
+ return 0;
+}
+
+static int put_segment(
+ QEMUFile *f, void *opaque, size_t size,
+ const VMStateField *field, QJSON *vmdesc)
+{
+ uint32_t *ramp = opaque;
+ uint8_t temp = *ramp >> 16;
+
+ qemu_put_byte(f, temp);
+ return 0;
+}
+
+static const VMStateInfo vms_rampD = {
+ .name = "rampD",
+ .get = get_segment,
+ .put = put_segment,
+};
+static const VMStateInfo vms_rampX = {
+ .name = "rampX",
+ .get = get_segment,
+ .put = put_segment,
+};
+static const VMStateInfo vms_rampY = {
+ .name = "rampY",
+ .get = get_segment,
+ .put = put_segment,
+};
+static const VMStateInfo vms_rampZ = {
+ .name = "rampZ",
+ .get = get_segment,
+ .put = put_segment,
+};
+static const VMStateInfo vms_eind = {
+ .name = "eind",
+ .get = get_segment,
+ .put = put_segment,
+};
+
+const VMStateDescription vms_avr_cpu = {
+ .name = "cpu",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(env.pc_w, AVRCPU),
+ VMSTATE_UINT32(env.sp, AVRCPU),
+ VMSTATE_UINT32(env.skip, AVRCPU),
+
+ VMSTATE_UINT32_ARRAY(env.r, AVRCPU, NUMBER_OF_CPU_REGISTERS),
+
+ VMSTATE_SINGLE(env, AVRCPU, 0, vms_sreg, CPUAVRState),
+ VMSTATE_SINGLE(env.rampD, AVRCPU, 0, vms_rampD, uint32_t),
+ VMSTATE_SINGLE(env.rampX, AVRCPU, 0, vms_rampX, uint32_t),
+ VMSTATE_SINGLE(env.rampY, AVRCPU, 0, vms_rampY, uint32_t),
+ VMSTATE_SINGLE(env.rampZ, AVRCPU, 0, vms_rampZ, uint32_t),
+ VMSTATE_SINGLE(env.eind, AVRCPU, 0, vms_eind, uint32_t),
+
+ VMSTATE_END_OF_LIST()
+ }
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 04/29] target/avr: Add GDB support
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (2 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 03/29] target/avr: Add migration support Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 05/29] target/avr: Introduce enumeration AVRFeature Aleksandar Markovic
` (26 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes GDB hooks for reading from wnd wrtiting to AVR
registers, and xml register definition file as well.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
gdb-xml/avr-cpu.xml | 49 ++++++++++++++++++++++++++++++
target/avr/cpu.c | 4 +++
target/avr/cpu.h | 2 ++
target/avr/gdbstub.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 139 insertions(+)
create mode 100644 gdb-xml/avr-cpu.xml
create mode 100644 target/avr/gdbstub.c
diff --git a/gdb-xml/avr-cpu.xml b/gdb-xml/avr-cpu.xml
new file mode 100644
index 0000000..c4747f5
--- /dev/null
+++ b/gdb-xml/avr-cpu.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!-- Register numbers are hard-coded in order to maintain backward
+ compatibility with older versions of tools that didn't use xml
+ register descriptions. -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.riscv.cpu">
+ <reg name="r0" bitsize="8" type="int" regnum="0"/>
+ <reg name="r1" bitsize="8" type="int"/>
+ <reg name="r2" bitsize="8" type="int"/>
+ <reg name="r3" bitsize="8" type="int"/>
+ <reg name="r4" bitsize="8" type="int"/>
+ <reg name="r5" bitsize="8" type="int"/>
+ <reg name="r6" bitsize="8" type="int"/>
+ <reg name="r7" bitsize="8" type="int"/>
+ <reg name="r8" bitsize="8" type="int"/>
+ <reg name="r9" bitsize="8" type="int"/>
+ <reg name="r10" bitsize="8" type="int"/>
+ <reg name="r11" bitsize="8" type="int"/>
+ <reg name="r12" bitsize="8" type="int"/>
+ <reg name="r13" bitsize="8" type="int"/>
+ <reg name="r14" bitsize="8" type="int"/>
+ <reg name="r15" bitsize="8" type="int"/>
+ <reg name="r16" bitsize="8" type="int"/>
+ <reg name="r17" bitsize="8" type="int"/>
+ <reg name="r18" bitsize="8" type="int"/>
+ <reg name="r19" bitsize="8" type="int"/>
+ <reg name="r20" bitsize="8" type="int"/>
+ <reg name="r21" bitsize="8" type="int"/>
+ <reg name="r22" bitsize="8" type="int"/>
+ <reg name="r23" bitsize="8" type="int"/>
+ <reg name="r24" bitsize="8" type="int"/>
+ <reg name="r25" bitsize="8" type="int"/>
+ <reg name="r26" bitsize="8" type="int"/>
+ <reg name="r27" bitsize="8" type="int"/>
+ <reg name="r28" bitsize="8" type="int"/>
+ <reg name="r29" bitsize="8" type="int"/>
+ <reg name="r30" bitsize="8" type="int"/>
+ <reg name="r31" bitsize="8" type="int"/>
+ <reg name="sreg" bitsize="8" type="int"/>
+ <reg name="sp" bitsize="8" type="int"/>
+ <reg name="pc" bitsize="8" type="int"/>
+</feature>
diff --git a/target/avr/cpu.c b/target/avr/cpu.c
index 49e32af..f41a887 100644
--- a/target/avr/cpu.c
+++ b/target/avr/cpu.c
@@ -210,4 +210,8 @@ static void avr_cpu_class_init(ObjectClass *oc, void *data)
cc->tlb_fill = avr_cpu_tlb_fill;
cc->tcg_initialize = avr_cpu_tcg_init;
cc->synchronize_from_tb = avr_cpu_synchronize_from_tb;
+ cc->gdb_read_register = avr_cpu_gdb_read_register;
+ cc->gdb_write_register = avr_cpu_gdb_write_register;
+ cc->gdb_num_core_regs = 35;
+ cc->gdb_core_xml_file = "avr-cpu.xml";
}
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
index 2907a37..91dfa0f 100644
--- a/target/avr/cpu.h
+++ b/target/avr/cpu.h
@@ -124,6 +124,8 @@ extern const struct VMStateDescription vms_avr_cpu;
void avr_cpu_do_interrupt(CPUState *cpu);
bool avr_cpu_exec_interrupt(CPUState *cpu, int int_req);
hwaddr avr_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
+int avr_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int avr_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
#define cpu_list avr_cpu_list
#define cpu_signal_handler cpu_avr_signal_handler
diff --git a/target/avr/gdbstub.c b/target/avr/gdbstub.c
new file mode 100644
index 0000000..733184c
--- /dev/null
+++ b/target/avr/gdbstub.c
@@ -0,0 +1,84 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "exec/gdbstub.h"
+
+int avr_cpu_gdb_read_register(CPUState *cs, uint8_t *mem_buf, int n)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ /* R */
+ if (n < 32) {
+ return gdb_get_reg8(mem_buf, env->r[n]);
+ }
+
+ /* SREG */
+ if (n == 32) {
+ uint8_t sreg = cpu_get_sreg(env);
+
+ return gdb_get_reg8(mem_buf, sreg);
+ }
+
+ /* SP */
+ if (n == 33) {
+ return gdb_get_reg16(mem_buf, env->sp & 0x0000ffff);
+ }
+
+ /* PC */
+ if (n == 34) {
+ return gdb_get_reg32(mem_buf, env->pc_w * 2);
+ }
+
+ return 0;
+}
+
+int avr_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
+{
+ AVRCPU *cpu = AVR_CPU(cs);
+ CPUAVRState *env = &cpu->env;
+
+ /* R */
+ if (n < 32) {
+ env->r[n] = *mem_buf;
+ return 1;
+ }
+
+ /* SREG */
+ if (n == 32) {
+ cpu_set_sreg(env, *mem_buf);
+ return 1;
+ }
+
+ /* SP */
+ if (n == 33) {
+ env->sp = lduw_p(mem_buf);
+ return 2;
+ }
+
+ /* PC */
+ if (n == 34) {
+ env->pc_w = ldl_p(mem_buf) / 2;
+ return 4;
+ }
+
+ return 0;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 05/29] target/avr: Introduce enumeration AVRFeature
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (3 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 04/29] target/avr: Add GDB support Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 06/29] target/avr: Add defintions of AVR core types Aleksandar Markovic
` (25 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This patch introduces enumeration "AVRFeature" that will be
used for defining various AVR core types.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu.h | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
index 91dfa0f..e94dab3 100644
--- a/target/avr/cpu.h
+++ b/target/avr/cpu.h
@@ -73,6 +73,42 @@
#define EF_AVR_MACH 0x7F
+typedef enum AVRFeature {
+ AVR_FEATURE_SRAM,
+
+ AVR_FEATURE_1_BYTE_PC,
+ AVR_FEATURE_2_BYTE_PC,
+ AVR_FEATURE_3_BYTE_PC,
+
+ AVR_FEATURE_1_BYTE_SP,
+ AVR_FEATURE_2_BYTE_SP,
+
+ AVR_FEATURE_BREAK,
+ AVR_FEATURE_DES,
+ AVR_FEATURE_RMW, /* Read Modify Write - XCH LAC LAS LAT */
+
+ AVR_FEATURE_EIJMP_EICALL,
+ AVR_FEATURE_IJMP_ICALL,
+ AVR_FEATURE_JMP_CALL,
+
+ AVR_FEATURE_ADIW_SBIW,
+
+ AVR_FEATURE_SPM,
+ AVR_FEATURE_SPMX,
+
+ AVR_FEATURE_ELPMX,
+ AVR_FEATURE_ELPM,
+ AVR_FEATURE_LPMX,
+ AVR_FEATURE_LPM,
+
+ AVR_FEATURE_MOVW,
+ AVR_FEATURE_MUL,
+ AVR_FEATURE_RAMPD,
+ AVR_FEATURE_RAMPX,
+ AVR_FEATURE_RAMPY,
+ AVR_FEATURE_RAMPZ,
+} AVRFeature;
+
typedef struct CPUAVRState CPUAVRState;
struct CPUAVRState {
@@ -127,6 +163,16 @@ hwaddr avr_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
int avr_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
int avr_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+static inline int avr_feature(CPUAVRState *env, AVRFeature feature)
+{
+ return (env->features & (1U << feature)) != 0;
+}
+
+static inline void set_avr_feature(CPUAVRState *env, int feature)
+{
+ env->features |= (1U << feature);
+}
+
#define cpu_list avr_cpu_list
#define cpu_signal_handler cpu_avr_signal_handler
#define cpu_mmu_index avr_cpu_mmu_index
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (4 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 05/29] target/avr: Introduce enumeration AVRFeature Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-02-02 15:40 ` Joaquin de Andres
2020-01-31 0:02 ` [PATCH rc4 07/29] target/avr: Add instruction helpers Aleksandar Markovic
` (24 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
AVR core types are:
- avr1
- avr2
- avr25
- avr3
- avr31
- avr35
- avr4
- avr5
- avr51
- avr6
- avrtiny
- xmega2
- xmega3
- xmega4
- xmega5
- xmega6
- xmega7
Each core type covers multiple AVR MCUs, mentioned in the comments
before definition of particular AVR core type (part of this patch).
AVR core type defines shared features that are valid for all AVR
MCUs belonging in that type.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu.c | 601 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 601 insertions(+)
diff --git a/target/avr/cpu.c b/target/avr/cpu.c
index f41a887..e0ae055 100644
--- a/target/avr/cpu.c
+++ b/target/avr/cpu.c
@@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc, void *data)
cc->gdb_num_core_regs = 35;
cc->gdb_core_xml_file = "avr-cpu.xml";
}
+
+/*
+ * Setting features of AVR core type avr1
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * at90s1200, attiny11, attiny12, attiny15, attiny28
+ */
+static void avr_avr1_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+}
+
+/*
+ * Setting features of AVR core type avr2
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26, at90s4414,
+ * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
+ */
+static void avr_avr2_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+}
+
+/*
+ * Setting features of AVR core type avr25
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a, attiny24,
+ * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84, attiny84a,
+ * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461, attiny461a,
+ * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88, attiny828,
+ * attiny841, at86rf401
+ */
+static void avr_avr25_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+}
+
+/*
+ * Setting features of AVR core type avr3
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * at43usb355, at76c711
+ */
+static void avr_avr3_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+}
+
+/*
+ * Setting features of AVR core type avr31
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atmega103, at43usb320
+ */
+static void avr_avr31_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+}
+
+/*
+ * Setting features of AVR core type avr35
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2, atmega16u2,
+ * atmega32u2, attiny167, attiny1634
+ */
+static void avr_avr35_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+}
+
+/*
+ * Setting features of AVR core type avr4
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48, atmega48a,
+ * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
+ * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva, at90pwm1,
+ * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
+ */
+static void avr_avr4_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+}
+
+/*
+ * Setting features of AVR core type avr5
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831, ata6613c,
+ * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161, atmega162,
+ * atmega163, atmega164a, atmega164p, atmega164pa, atmega165, atmega165a,
+ * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p, atmega168pa,
+ * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa, atmega16hvb,
+ * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32, atmega323,
+ * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a, atmega325p,
+ * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa, atmega328,
+ * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p, atmega329pa,
+ * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1, atmega32m1,
+ * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640, atmega644,
+ * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a, atmega645p,
+ * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a, atmega649p,
+ * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a, atmega6490p,
+ * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
+ * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161, at90pwm216,
+ * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
+ */
+static void avr_avr5_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+}
+
+/*
+ * Setting features of AVR core type avr51
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atmega128, atmega128a, atmega1280, atmega1281, atmega1284, atmega1284p,
+ * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128, at90usb1286,
+ * at90usb1287
+ */
+static void avr_avr51_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+}
+
+/*
+ * Setting features of AVR core type avr6
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
+ */
+static void avr_avr6_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+}
+
+/*
+ * Setting features of AVR core type avrtiny
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
+ */
+static void avr_avrtiny_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
+}
+
+/*
+ * Setting features of AVR core type xmega2
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4, atxmega32c3,
+ * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
+ * atxmega32c4, atxmega32e5
+ */
+static void avr_xmega2_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+/*
+ * Setting features of AVR core type xmega3
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417, attiny814,
+ * attiny816, attiny817, attiny1614, attiny1616, attiny1617, attiny3214,
+ * attiny3216, attiny3217, atmega808, atmega809, atmega1608, atmega1609,
+ * atmega3208, atmega3209, atmega4808, atmega4809
+ */
+static void avr_xmega3_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+/*
+ * Setting features of AVR core type xmega4
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
+ * atxmega64b3, atxmega64c3, atxmega64d4
+ */
+static void avr_xmega4_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+/*
+ * Setting features of AVR core type xmega5
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atxmega64a1, atxmega64a1u
+ */
+static void avr_xmega5_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPD);
+ set_avr_feature(env, AVR_FEATURE_RAMPX);
+ set_avr_feature(env, AVR_FEATURE_RAMPY);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+/*
+ * Setting features of AVR core type xmega6
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3, atxmega256a3,
+ * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u, atxmega128b1,
+ * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u, atxmega192c3,
+ * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
+ */
+static void avr_xmega6_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+/*
+ * Setting features of AVR core type xmega7
+ * --------------------------------------
+ *
+ * This type of AVR core is present in the following AVR MCUs:
+ *
+ * atxmega128a1, atxmega128a1u, atxmega128a4u
+ */
+static void avr_xmega7_initfn(Object *obj)
+{
+ AVRCPU *cpu = AVR_CPU(obj);
+ CPUAVRState *env = &cpu->env;
+
+ set_avr_feature(env, AVR_FEATURE_LPM);
+ set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
+ set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
+ set_avr_feature(env, AVR_FEATURE_SRAM);
+ set_avr_feature(env, AVR_FEATURE_BREAK);
+
+ set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
+ set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
+ set_avr_feature(env, AVR_FEATURE_RAMPD);
+ set_avr_feature(env, AVR_FEATURE_RAMPX);
+ set_avr_feature(env, AVR_FEATURE_RAMPY);
+ set_avr_feature(env, AVR_FEATURE_RAMPZ);
+ set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
+ set_avr_feature(env, AVR_FEATURE_ELPMX);
+ set_avr_feature(env, AVR_FEATURE_ELPM);
+ set_avr_feature(env, AVR_FEATURE_JMP_CALL);
+ set_avr_feature(env, AVR_FEATURE_LPMX);
+ set_avr_feature(env, AVR_FEATURE_MOVW);
+ set_avr_feature(env, AVR_FEATURE_MUL);
+ set_avr_feature(env, AVR_FEATURE_RMW);
+}
+
+typedef struct AVRCPUInfo {
+ const char *name;
+ void (*initfn)(Object *obj);
+} AVRCPUInfo;
+
+
+static void avr_cpu_list_entry(gpointer data, gpointer user_data)
+{
+ const char *typename = object_class_get_name(OBJECT_CLASS(data));
+
+ qemu_printf("%s\n", typename);
+}
+
+void avr_cpu_list(void)
+{
+ GSList *list;
+ list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
+ g_slist_foreach(list, avr_cpu_list_entry, NULL);
+ g_slist_free(list);
+}
+
+#define DEFINE_AVR_CPU_TYPE(model, initfn) \
+ { \
+ .parent = TYPE_AVR_CPU, \
+ .instance_init = initfn, \
+ .name = AVR_CPU_TYPE_NAME(model), \
+ }
+
+static const TypeInfo avr_cpu_type_info[] = {
+ {
+ .name = TYPE_AVR_CPU,
+ .parent = TYPE_CPU,
+ .instance_size = sizeof(AVRCPU),
+ .instance_init = avr_cpu_initfn,
+ .class_size = sizeof(AVRCPUClass),
+ .class_init = avr_cpu_class_init,
+ .abstract = true,
+ },
+ DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
+ DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
+ DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
+ DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
+ DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
+ DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
+ DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
+ DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
+ DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
+ DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
+ DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
+ DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
+};
+
+const char *avr_flags_to_cpu_type(uint32_t flags, const char *def_cpu_type)
+{
+ switch (flags & EF_AVR_MACH) {
+ case bfd_mach_avr1:
+ return AVR_CPU_TYPE_NAME("avr1");
+ case bfd_mach_avr2:
+ return AVR_CPU_TYPE_NAME("avr2");
+ case bfd_mach_avr25:
+ return AVR_CPU_TYPE_NAME("avr25");
+ case bfd_mach_avr3:
+ return AVR_CPU_TYPE_NAME("avr3");
+ case bfd_mach_avr31:
+ return AVR_CPU_TYPE_NAME("avr31");
+ case bfd_mach_avr35:
+ return AVR_CPU_TYPE_NAME("avr35");
+ case bfd_mach_avr4:
+ return AVR_CPU_TYPE_NAME("avr4");
+ case bfd_mach_avr5:
+ return AVR_CPU_TYPE_NAME("avr5");
+ case bfd_mach_avr51:
+ return AVR_CPU_TYPE_NAME("avr51");
+ case bfd_mach_avr6:
+ return AVR_CPU_TYPE_NAME("avr6");
+ case bfd_mach_avrtiny:
+ return AVR_CPU_TYPE_NAME("avrtiny");
+ case bfd_mach_avrxmega2:
+ return AVR_CPU_TYPE_NAME("xmega2");
+ case bfd_mach_avrxmega3:
+ return AVR_CPU_TYPE_NAME("xmega3");
+ case bfd_mach_avrxmega4:
+ return AVR_CPU_TYPE_NAME("xmega4");
+ case bfd_mach_avrxmega5:
+ return AVR_CPU_TYPE_NAME("xmega5");
+ case bfd_mach_avrxmega6:
+ return AVR_CPU_TYPE_NAME("xmega6");
+ case bfd_mach_avrxmega7:
+ return AVR_CPU_TYPE_NAME("xmega7");
+ default:
+ return def_cpu_type;
+ }
+}
+
+DEFINE_TYPES(avr_cpu_type_info)
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-01-31 0:02 ` [PATCH rc4 06/29] target/avr: Add defintions of AVR core types Aleksandar Markovic
@ 2020-02-02 15:40 ` Joaquin de Andres
2020-02-08 7:35 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Joaquin de Andres @ 2020-02-02 15:40 UTC (permalink / raw)
To: Aleksandar Markovic, qemu-devel
Cc: Michael Rolnik, Sarah Harris, Richard Henderson, Aleksandar Markovic
On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> AVR core types are:
>
> - avr1
> - avr2
> - avr25
> - avr3
> - avr31
> - avr35
> - avr4
> - avr5
> - avr51
> - avr6
> - avrtiny
> - xmega2
> - xmega3
> - xmega4
> - xmega5
> - xmega6
> - xmega7
>
> Each core type covers multiple AVR MCUs, mentioned in the comments
> before definition of particular AVR core type (part of this patch).
>
> AVR core type defines shared features that are valid for all AVR
> MCUs belonging in that type.
>
> [AM: Split a larger AVR introduction patch into logical units]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Acked-by: Igor Mammedov <imammedo@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> target/avr/cpu.c | 601 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 601 insertions(+)
>
> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
> index f41a887..e0ae055 100644
> --- a/target/avr/cpu.c
> +++ b/target/avr/cpu.c
> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc, void *data)
> cc->gdb_num_core_regs = 35;
> cc->gdb_core_xml_file = "avr-cpu.xml";
> }
> +
> +/*
> + * Setting features of AVR core type avr1
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * at90s1200, attiny11, attiny12, attiny15, attiny28
> + */
> +static void avr_avr1_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> +}
> +
> +/*
> + * Setting features of AVR core type avr2
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26, at90s4414,
> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
> + */
> +static void avr_avr2_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> +}
> +
> +/*
> + * Setting features of AVR core type avr25
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a, attiny24,
> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84, attiny84a,
> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461, attiny461a,
> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88, attiny828,
> + * attiny841, at86rf401
> + */
> +static void avr_avr25_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> +}
> +
> +/*
> + * Setting features of AVR core type avr3
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * at43usb355, at76c711
> + */
> +static void avr_avr3_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> +}
> +
> +/*
> + * Setting features of AVR core type avr31
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atmega103, at43usb320
> + */
> +static void avr_avr31_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> +}
> +
> +/*
> + * Setting features of AVR core type avr35
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2, atmega16u2,
> + * atmega32u2, attiny167, attiny1634
> + */
> +static void avr_avr35_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> +}
> +
> +/*
> + * Setting features of AVR core type avr4
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48, atmega48a,
> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva, at90pwm1,
> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
> + */
> +static void avr_avr4_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> +}
> +
> +/*
> + * Setting features of AVR core type avr5
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831, ata6613c,
> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161, atmega162,
> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165, atmega165a,
> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p, atmega168pa,
> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa, atmega16hvb,
> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32, atmega323,
> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a, atmega325p,
> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa, atmega328,
> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p, atmega329pa,
> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1, atmega32m1,
> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640, atmega644,
> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a, atmega645p,
> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a, atmega649p,
> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a, atmega6490p,
> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161, at90pwm216,
> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
> + */
> +static void avr_avr5_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> +}
> +
> +/*
> + * Setting features of AVR core type avr51
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284, atmega1284p,
> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128, at90usb1286,
> + * at90usb1287
> + */
> +static void avr_avr51_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> +}
> +
> +/*
> + * Setting features of AVR core type avr6
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
> + */
> +static void avr_avr6_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> +}
> +
> +/*
> + * Setting features of AVR core type avrtiny
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
> + */
> +static void avr_avrtiny_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega2
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4, atxmega32c3,
> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
> + * atxmega32c4, atxmega32e5
> + */
> +static void avr_xmega2_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega3
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417, attiny814,
> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617, attiny3214,
> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608, atmega1609,
> + * atmega3208, atmega3209, atmega4808, atmega4809
> + */
> +static void avr_xmega3_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega4
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
> + * atxmega64b3, atxmega64c3, atxmega64d4
> + */
> +static void avr_xmega4_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega5
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atxmega64a1, atxmega64a1u
> + */
> +static void avr_xmega5_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega6
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3, atxmega256a3,
> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u, atxmega128b1,
> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u, atxmega192c3,
> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
> + */
> +static void avr_xmega6_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +/*
> + * Setting features of AVR core type xmega7
> + * --------------------------------------
> + *
> + * This type of AVR core is present in the following AVR MCUs:
> + *
> + * atxmega128a1, atxmega128a1u, atxmega128a4u
> + */
> +static void avr_xmega7_initfn(Object *obj)
> +{
> + AVRCPU *cpu = AVR_CPU(obj);
> + CPUAVRState *env = &cpu->env;
> +
> + set_avr_feature(env, AVR_FEATURE_LPM);
> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> + set_avr_feature(env, AVR_FEATURE_SRAM);
> + set_avr_feature(env, AVR_FEATURE_BREAK);
> +
> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> + set_avr_feature(env, AVR_FEATURE_ELPM);
> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> + set_avr_feature(env, AVR_FEATURE_LPMX);
> + set_avr_feature(env, AVR_FEATURE_MOVW);
> + set_avr_feature(env, AVR_FEATURE_MUL);
> + set_avr_feature(env, AVR_FEATURE_RMW);
> +}
> +
> +typedef struct AVRCPUInfo {
> + const char *name;
> + void (*initfn)(Object *obj);
> +} AVRCPUInfo;
> +
> +
> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
> +{
> + const char *typename = object_class_get_name(OBJECT_CLASS(data));
> +
> + qemu_printf("%s\n", typename);
> +}
> +
> +void avr_cpu_list(void)
> +{
> + GSList *list;
> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
> + g_slist_free(list);
> +}
> +
> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
> + { \
> + .parent = TYPE_AVR_CPU, \
> + .instance_init = initfn, \
> + .name = AVR_CPU_TYPE_NAME(model), \
> + }
> +
> +static const TypeInfo avr_cpu_type_info[] = {
> + {
> + .name = TYPE_AVR_CPU,
> + .parent = TYPE_CPU,
> + .instance_size = sizeof(AVRCPU),
> + .instance_init = avr_cpu_initfn,
> + .class_size = sizeof(AVRCPUClass),
> + .class_init = avr_cpu_class_init,
> + .abstract = true,
> + },
> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
> +};
> +
> +const char *avr_flags_to_cpu_type(uint32_t flags, const char *def_cpu_type)
> +{
> + switch (flags & EF_AVR_MACH) {
> + case bfd_mach_avr1:
> + return AVR_CPU_TYPE_NAME("avr1");
> + case bfd_mach_avr2:
> + return AVR_CPU_TYPE_NAME("avr2");
> + case bfd_mach_avr25:
> + return AVR_CPU_TYPE_NAME("avr25");
> + case bfd_mach_avr3:
> + return AVR_CPU_TYPE_NAME("avr3");
> + case bfd_mach_avr31:
> + return AVR_CPU_TYPE_NAME("avr31");
> + case bfd_mach_avr35:
> + return AVR_CPU_TYPE_NAME("avr35");
> + case bfd_mach_avr4:
> + return AVR_CPU_TYPE_NAME("avr4");
> + case bfd_mach_avr5:
> + return AVR_CPU_TYPE_NAME("avr5");
> + case bfd_mach_avr51:
> + return AVR_CPU_TYPE_NAME("avr51");
> + case bfd_mach_avr6:
> + return AVR_CPU_TYPE_NAME("avr6");
> + case bfd_mach_avrtiny:
> + return AVR_CPU_TYPE_NAME("avrtiny");
> + case bfd_mach_avrxmega2:
> + return AVR_CPU_TYPE_NAME("xmega2");
> + case bfd_mach_avrxmega3:
> + return AVR_CPU_TYPE_NAME("xmega3");
> + case bfd_mach_avrxmega4:
> + return AVR_CPU_TYPE_NAME("xmega4");
> + case bfd_mach_avrxmega5:
> + return AVR_CPU_TYPE_NAME("xmega5");
> + case bfd_mach_avrxmega6:
> + return AVR_CPU_TYPE_NAME("xmega6");
> + case bfd_mach_avrxmega7:
> + return AVR_CPU_TYPE_NAME("xmega7");
> + default:
> + return def_cpu_type;
> + }
> +}
> +
> +DEFINE_TYPES(avr_cpu_type_info)
>
Hi! me again. Following the RC2 discussion. I've being looking in the
GCC definition of the architecture and as far as I can understand this
definitions are the generic definitions of the arch families.
avr_arch_types[] =
{
/* unknown device specified */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
AVR_MMCU_DEFAULT },
/*
A M J LM E E E X R T d S FPO S O A
S U M PO L L I M A I a t lMff F ff r
M L P MV P P J E M N t a a s R s c
XW M M M G P Y a r s e e h
X P A D t h t t ID */
{ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1" },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2" },
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25" },
{ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3" },
{ 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31" },
{ 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35" },
{ 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4" },
{ 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5" },
{ 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51" },
{ 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6" },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100", "avrtiny"},
{ 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102", "avrxmega2" },
{ 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103", "avrxmega3" },
{ 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104", "avrxmega4" },
{ 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105", "avrxmega5" },
{ 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106", "avrxmega6" },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107", "avrxmega7" }
};
And then you have features for the specific microcontrollers:
AVR_ISA_RMW
AVR_SHORT_SP
AVR_ERRATA_SKIP
AVR_ISA_LDS
AVR_ISA_RCALL
They are mixed in the file 'avr-mcus.def' for family and microcontroller
definition. Only looking at the family definition:
AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
0x0060, 0x0, 0x60000, 0)
AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
0x0060, 0x0, 0x2000, 0)
AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
0x0060, 0x0, 0x6000, 0)
AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
0x0060, 0x0, 0x20000, 0)
AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
0x0100, 0x0, 0x4000, 0)
AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
0x0060, 0x0, 0x2000, 0)
AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
0x0060, 0x0, 0x4000, 0)
AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
0x0100, 0x0, 0x20000, 0)
AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
0x0200, 0x0, 0x40000, 0)
AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
0x2000, 0x0, 0x9000, 0)
AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
0x3f00, 0x0, 0x8000, 0)
AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
0x2000, 0x0, 0x11000, 0)
AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
0x2000, 0x0, 0x11000, 0)
AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
0x2000, 0x0, 0x60000, 0)
AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
0x2000, 0x0, 0x22000, 0)
AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
0x0040, 0x0, 0x400, 0)
AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
0x0060, 0x0, 0x400, 0)
I don't really understand how do you get to the proposed family
definition for qemu. Probably is my fault but if you can help me to
understand will be grate!
Regards,
--joa
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-02 15:40 ` Joaquin de Andres
@ 2020-02-08 7:35 ` Aleksandar Markovic
2020-02-10 7:39 ` Michael Rolnik
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-02-08 7:35 UTC (permalink / raw)
To: Joaquin de Andres
Cc: Aleksandar Markovic, Michael Rolnik, Sarah Harris,
Richard Henderson, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 29830 bytes --]
On Sunday, February 2, 2020, Joaquin de Andres <me@xcancerberox.com.ar>
wrote:
> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
>
>> From: Michael Rolnik <mrolnik@gmail.com>
>>
>> AVR core types are:
>>
>> - avr1
>> - avr2
>> - avr25
>> - avr3
>> - avr31
>> - avr35
>> - avr4
>> - avr5
>> - avr51
>> - avr6
>> - avrtiny
>> - xmega2
>> - xmega3
>> - xmega4
>> - xmega5
>> - xmega6
>> - xmega7
>>
>> Each core type covers multiple AVR MCUs, mentioned in the comments
>> before definition of particular AVR core type (part of this patch).
>>
>> AVR core type defines shared features that are valid for all AVR
>> MCUs belonging in that type.
>>
>> [AM: Split a larger AVR introduction patch into logical units]
>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>
>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>> Acked-by: Igor Mammedov <imammedo@redhat.com>
>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>> ---
>> target/avr/cpu.c | 601 ++++++++++++++++++++++++++++++
>> +++++++++++++++++++++++++
>> 1 file changed, 601 insertions(+)
>>
>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
>> index f41a887..e0ae055 100644
>> --- a/target/avr/cpu.c
>> +++ b/target/avr/cpu.c
>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc,
>> void *data)
>> cc->gdb_num_core_regs = 35;
>> cc->gdb_core_xml_file = "avr-cpu.xml";
>> }
>> +
>> +/*
>> + * Setting features of AVR core type avr1
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
>> + */
>> +static void avr_avr1_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr2
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26,
>> at90s4414,
>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
>> + */
>> +static void avr_avr2_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr25
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a,
>> attiny24,
>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84,
>> attiny84a,
>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461,
>> attiny461a,
>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88,
>> attiny828,
>> + * attiny841, at86rf401
>> + */
>> +static void avr_avr25_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr3
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * at43usb355, at76c711
>> + */
>> +static void avr_avr3_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr31
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atmega103, at43usb320
>> + */
>> +static void avr_avr31_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr35
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2,
>> atmega16u2,
>> + * atmega32u2, attiny167, attiny1634
>> + */
>> +static void avr_avr35_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr4
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48,
>> atmega48a,
>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva, at90pwm1,
>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
>> + */
>> +static void avr_avr4_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr5
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831,
>> ata6613c,
>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161, atmega162,
>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165, atmega165a,
>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p,
>> atmega168pa,
>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa,
>> atmega16hvb,
>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32,
>> atmega323,
>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a,
>> atmega325p,
>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa,
>> atmega328,
>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p,
>> atmega329pa,
>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1,
>> atmega32m1,
>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640,
>> atmega644,
>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a,
>> atmega645p,
>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a,
>> atmega649p,
>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a,
>> atmega6490p,
>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161,
>> at90pwm216,
>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
>> + */
>> +static void avr_avr5_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr51
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284,
>> atmega1284p,
>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128, at90usb1286,
>> + * at90usb1287
>> + */
>> +static void avr_avr51_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avr6
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
>> + */
>> +static void avr_avr6_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type avrtiny
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
>> + */
>> +static void avr_avrtiny_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega2
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4,
>> atxmega32c3,
>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
>> + * atxmega32c4, atxmega32e5
>> + */
>> +static void avr_xmega2_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega3
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417,
>> attiny814,
>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617, attiny3214,
>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608, atmega1609,
>> + * atmega3208, atmega3209, atmega4808, atmega4809
>> + */
>> +static void avr_xmega3_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega4
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
>> + * atxmega64b3, atxmega64c3, atxmega64d4
>> + */
>> +static void avr_xmega4_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega5
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atxmega64a1, atxmega64a1u
>> + */
>> +static void avr_xmega5_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega6
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3, atxmega256a3,
>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u,
>> atxmega128b1,
>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u, atxmega192c3,
>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
>> + */
>> +static void avr_xmega6_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +/*
>> + * Setting features of AVR core type xmega7
>> + * --------------------------------------
>> + *
>> + * This type of AVR core is present in the following AVR MCUs:
>> + *
>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
>> + */
>> +static void avr_xmega7_initfn(Object *obj)
>> +{
>> + AVRCPU *cpu = AVR_CPU(obj);
>> + CPUAVRState *env = &cpu->env;
>> +
>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> +
>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> +}
>> +
>> +typedef struct AVRCPUInfo {
>> + const char *name;
>> + void (*initfn)(Object *obj);
>> +} AVRCPUInfo;
>> +
>> +
>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
>> +{
>> + const char *typename = object_class_get_name(OBJECT_CLASS(data));
>> +
>> + qemu_printf("%s\n", typename);
>> +}
>> +
>> +void avr_cpu_list(void)
>> +{
>> + GSList *list;
>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
>> + g_slist_free(list);
>> +}
>> +
>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
>> + { \
>> + .parent = TYPE_AVR_CPU, \
>> + .instance_init = initfn, \
>> + .name = AVR_CPU_TYPE_NAME(model), \
>> + }
>> +
>> +static const TypeInfo avr_cpu_type_info[] = {
>> + {
>> + .name = TYPE_AVR_CPU,
>> + .parent = TYPE_CPU,
>> + .instance_size = sizeof(AVRCPU),
>> + .instance_init = avr_cpu_initfn,
>> + .class_size = sizeof(AVRCPUClass),
>> + .class_init = avr_cpu_class_init,
>> + .abstract = true,
>> + },
>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
>> +};
>> +
>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char
>> *def_cpu_type)
>> +{
>> + switch (flags & EF_AVR_MACH) {
>> + case bfd_mach_avr1:
>> + return AVR_CPU_TYPE_NAME("avr1");
>> + case bfd_mach_avr2:
>> + return AVR_CPU_TYPE_NAME("avr2");
>> + case bfd_mach_avr25:
>> + return AVR_CPU_TYPE_NAME("avr25");
>> + case bfd_mach_avr3:
>> + return AVR_CPU_TYPE_NAME("avr3");
>> + case bfd_mach_avr31:
>> + return AVR_CPU_TYPE_NAME("avr31");
>> + case bfd_mach_avr35:
>> + return AVR_CPU_TYPE_NAME("avr35");
>> + case bfd_mach_avr4:
>> + return AVR_CPU_TYPE_NAME("avr4");
>> + case bfd_mach_avr5:
>> + return AVR_CPU_TYPE_NAME("avr5");
>> + case bfd_mach_avr51:
>> + return AVR_CPU_TYPE_NAME("avr51");
>> + case bfd_mach_avr6:
>> + return AVR_CPU_TYPE_NAME("avr6");
>> + case bfd_mach_avrtiny:
>> + return AVR_CPU_TYPE_NAME("avrtiny");
>> + case bfd_mach_avrxmega2:
>> + return AVR_CPU_TYPE_NAME("xmega2");
>> + case bfd_mach_avrxmega3:
>> + return AVR_CPU_TYPE_NAME("xmega3");
>> + case bfd_mach_avrxmega4:
>> + return AVR_CPU_TYPE_NAME("xmega4");
>> + case bfd_mach_avrxmega5:
>> + return AVR_CPU_TYPE_NAME("xmega5");
>> + case bfd_mach_avrxmega6:
>> + return AVR_CPU_TYPE_NAME("xmega6");
>> + case bfd_mach_avrxmega7:
>> + return AVR_CPU_TYPE_NAME("xmega7");
>> + default:
>> + return def_cpu_type;
>> + }
>> +}
>> +
>> +DEFINE_TYPES(avr_cpu_type_info)
>>
>>
> Hi! me again. Following the RC2 discussion. I've being looking in the GCC
> definition of the architecture and as far as I can understand this
> definitions are the generic definitions of the arch families.
>
> avr_arch_types[] =
> {
> /* unknown device specified */
> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
> AVR_MMCU_DEFAULT },
> /*
> A M J LM E E E X R T d S FPO S O A
> S U M PO L L I M A I a t lMff F ff r
> M L P MV P P J E M N t a a s R s c
> XW M M M G P Y a r s e e h
> X P A D t h t t ID */
> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1" },
> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2" },
> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25" },
> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3" },
> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31" },
> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35" },
> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4" },
> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5" },
> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51" },
> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6" },
>
> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100", "avrtiny"},
> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102", "avrxmega2" },
> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103", "avrxmega3" },
> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104", "avrxmega4" },
> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105", "avrxmega5" },
> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106", "avrxmega6" },
> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107", "avrxmega7" }
> };
>
> And then you have features for the specific microcontrollers:
>
> AVR_ISA_RMW
> AVR_SHORT_SP
> AVR_ERRATA_SKIP
> AVR_ISA_LDS
> AVR_ISA_RCALL
>
> They are mixed in the file 'avr-mcus.def' for family and microcontroller
> definition. Only looking at the family definition:
>
> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
> 0x0060, 0x0, 0x60000, 0)
> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x2000, 0)
> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x6000, 0)
> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
> 0x0060, 0x0, 0x20000, 0)
> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
> 0x0100, 0x0, 0x4000, 0)
> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x2000, 0)
> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x4000, 0)
> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
> 0x0100, 0x0, 0x20000, 0)
> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
> 0x0200, 0x0, 0x40000, 0)
> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x9000, 0)
> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
> 0x3f00, 0x0, 0x8000, 0)
> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x11000, 0)
> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x11000, 0)
> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x60000, 0)
> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x22000, 0)
> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
> 0x0040, 0x0, 0x400, 0)
> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x400, 0)
>
> I don't really understand how do you get to the proposed family definition
> for qemu. Probably is my fault but if you can help me to understand will be
> grate!
>
>
Michal, can you really give us more details on how this mapping is done?
I alredy asked a similar question a while ago, and then you said you used
wikipedia article + avr datasheets. Can you give us more detailed info of
the whole process of creating ABRFeature list for a particular AVR core
type, and how that compares with the corresponding content in gcc, as
Joakin brought to our attention?
Thanks, Aleksandar
> Regards,
> --joa
>
[-- Attachment #2: Type: text/html, Size: 34131 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-08 7:35 ` Aleksandar Markovic
@ 2020-02-10 7:39 ` Michael Rolnik
2020-02-21 11:03 ` Michael Rolnik
0 siblings, 1 reply; 70+ messages in thread
From: Michael Rolnik @ 2020-02-10 7:39 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
[-- Attachment #1.1: Type: text/plain, Size: 31998 bytes --]
Hi all.
When I decided to implement AVR 8 bit CPU support for QEMU I found this
document
<http://ww1.microchip.com/downloads/en/devicedoc/atmel-0856-avr-instruction-set-manual.pdf>
which
listed all AVR instructions.
After that I learned that there are several CPU flavours, I looked into
this GCC file
<https://github.com/gcc-mirror/gcc/blob/master/gcc/config/avr/avr-devices.c> to
figure out what are they as I could not find any official document
explaining it.
Then I downloaded several datasheets and created a list of instructions by
CPU type (attached).It turned out that there are some variations
e.g.
- AVTTINY - some have LDS, some don't
- AVR1, AVR25 - some have short SP, some don't
- AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 - some have RMW,
some don't
- AVRXMEGA3 - some have RCALL, some don't
I decided to leave CPU flavour definition as suggested by GCC
gcc/config/avr/avr-devices.c
<https://github.com/gcc-mirror/gcc/blob/master/gcc/config/avr/avr-devices.c>
file and when a specific MCU is created it will set / reset CPU features
relevant to it.
I hope this helps.
Best Regards,
Michael Rolnik
On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic <
aleksandar.m.mail@gmail.com> wrote:
>
>
> On Sunday, February 2, 2020, Joaquin de Andres <me@xcancerberox.com.ar>
> wrote:
>
>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
>>
>>> From: Michael Rolnik <mrolnik@gmail.com>
>>>
>>> AVR core types are:
>>>
>>> - avr1
>>> - avr2
>>> - avr25
>>> - avr3
>>> - avr31
>>> - avr35
>>> - avr4
>>> - avr5
>>> - avr51
>>> - avr6
>>> - avrtiny
>>> - xmega2
>>> - xmega3
>>> - xmega4
>>> - xmega5
>>> - xmega6
>>> - xmega7
>>>
>>> Each core type covers multiple AVR MCUs, mentioned in the comments
>>> before definition of particular AVR core type (part of this patch).
>>>
>>> AVR core type defines shared features that are valid for all AVR
>>> MCUs belonging in that type.
>>>
>>> [AM: Split a larger AVR introduction patch into logical units]
>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>
>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>> Acked-by: Igor Mammedov <imammedo@redhat.com>
>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>> ---
>>> target/avr/cpu.c | 601
>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 601 insertions(+)
>>>
>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
>>> index f41a887..e0ae055 100644
>>> --- a/target/avr/cpu.c
>>> +++ b/target/avr/cpu.c
>>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc,
>>> void *data)
>>> cc->gdb_num_core_regs = 35;
>>> cc->gdb_core_xml_file = "avr-cpu.xml";
>>> }
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr1
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
>>> + */
>>> +static void avr_avr1_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr2
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26,
>>> at90s4414,
>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
>>> + */
>>> +static void avr_avr2_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr25
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a,
>>> attiny24,
>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84,
>>> attiny84a,
>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461,
>>> attiny461a,
>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88,
>>> attiny828,
>>> + * attiny841, at86rf401
>>> + */
>>> +static void avr_avr25_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr3
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * at43usb355, at76c711
>>> + */
>>> +static void avr_avr3_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr31
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atmega103, at43usb320
>>> + */
>>> +static void avr_avr31_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr35
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2,
>>> atmega16u2,
>>> + * atmega32u2, attiny167, attiny1634
>>> + */
>>> +static void avr_avr35_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr4
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48,
>>> atmega48a,
>>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva, at90pwm1,
>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
>>> + */
>>> +static void avr_avr4_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr5
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831,
>>> ata6613c,
>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161,
>>> atmega162,
>>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165,
>>> atmega165a,
>>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p,
>>> atmega168pa,
>>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa,
>>> atmega16hvb,
>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32,
>>> atmega323,
>>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a,
>>> atmega325p,
>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa,
>>> atmega328,
>>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p,
>>> atmega329pa,
>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1,
>>> atmega32m1,
>>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640,
>>> atmega644,
>>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a,
>>> atmega645p,
>>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a,
>>> atmega649p,
>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a,
>>> atmega6490p,
>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161,
>>> at90pwm216,
>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
>>> + */
>>> +static void avr_avr5_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr51
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284,
>>> atmega1284p,
>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128,
>>> at90usb1286,
>>> + * at90usb1287
>>> + */
>>> +static void avr_avr51_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avr6
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
>>> + */
>>> +static void avr_avr6_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type avrtiny
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
>>> + */
>>> +static void avr_avrtiny_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega2
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4,
>>> atxmega32c3,
>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
>>> + * atxmega32c4, atxmega32e5
>>> + */
>>> +static void avr_xmega2_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega3
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417,
>>> attiny814,
>>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617, attiny3214,
>>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608, atmega1609,
>>> + * atmega3208, atmega3209, atmega4808, atmega4809
>>> + */
>>> +static void avr_xmega3_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega4
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
>>> + * atxmega64b3, atxmega64c3, atxmega64d4
>>> + */
>>> +static void avr_xmega4_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega5
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atxmega64a1, atxmega64a1u
>>> + */
>>> +static void avr_xmega5_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega6
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3, atxmega256a3,
>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u,
>>> atxmega128b1,
>>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u,
>>> atxmega192c3,
>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
>>> + */
>>> +static void avr_xmega6_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +/*
>>> + * Setting features of AVR core type xmega7
>>> + * --------------------------------------
>>> + *
>>> + * This type of AVR core is present in the following AVR MCUs:
>>> + *
>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
>>> + */
>>> +static void avr_xmega7_initfn(Object *obj)
>>> +{
>>> + AVRCPU *cpu = AVR_CPU(obj);
>>> + CPUAVRState *env = &cpu->env;
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>> +
>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>> +}
>>> +
>>> +typedef struct AVRCPUInfo {
>>> + const char *name;
>>> + void (*initfn)(Object *obj);
>>> +} AVRCPUInfo;
>>> +
>>> +
>>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
>>> +{
>>> + const char *typename = object_class_get_name(OBJECT_CLASS(data));
>>> +
>>> + qemu_printf("%s\n", typename);
>>> +}
>>> +
>>> +void avr_cpu_list(void)
>>> +{
>>> + GSList *list;
>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
>>> + g_slist_free(list);
>>> +}
>>> +
>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
>>> + { \
>>> + .parent = TYPE_AVR_CPU, \
>>> + .instance_init = initfn, \
>>> + .name = AVR_CPU_TYPE_NAME(model), \
>>> + }
>>> +
>>> +static const TypeInfo avr_cpu_type_info[] = {
>>> + {
>>> + .name = TYPE_AVR_CPU,
>>> + .parent = TYPE_CPU,
>>> + .instance_size = sizeof(AVRCPU),
>>> + .instance_init = avr_cpu_initfn,
>>> + .class_size = sizeof(AVRCPUClass),
>>> + .class_init = avr_cpu_class_init,
>>> + .abstract = true,
>>> + },
>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
>>> +};
>>> +
>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char
>>> *def_cpu_type)
>>> +{
>>> + switch (flags & EF_AVR_MACH) {
>>> + case bfd_mach_avr1:
>>> + return AVR_CPU_TYPE_NAME("avr1");
>>> + case bfd_mach_avr2:
>>> + return AVR_CPU_TYPE_NAME("avr2");
>>> + case bfd_mach_avr25:
>>> + return AVR_CPU_TYPE_NAME("avr25");
>>> + case bfd_mach_avr3:
>>> + return AVR_CPU_TYPE_NAME("avr3");
>>> + case bfd_mach_avr31:
>>> + return AVR_CPU_TYPE_NAME("avr31");
>>> + case bfd_mach_avr35:
>>> + return AVR_CPU_TYPE_NAME("avr35");
>>> + case bfd_mach_avr4:
>>> + return AVR_CPU_TYPE_NAME("avr4");
>>> + case bfd_mach_avr5:
>>> + return AVR_CPU_TYPE_NAME("avr5");
>>> + case bfd_mach_avr51:
>>> + return AVR_CPU_TYPE_NAME("avr51");
>>> + case bfd_mach_avr6:
>>> + return AVR_CPU_TYPE_NAME("avr6");
>>> + case bfd_mach_avrtiny:
>>> + return AVR_CPU_TYPE_NAME("avrtiny");
>>> + case bfd_mach_avrxmega2:
>>> + return AVR_CPU_TYPE_NAME("xmega2");
>>> + case bfd_mach_avrxmega3:
>>> + return AVR_CPU_TYPE_NAME("xmega3");
>>> + case bfd_mach_avrxmega4:
>>> + return AVR_CPU_TYPE_NAME("xmega4");
>>> + case bfd_mach_avrxmega5:
>>> + return AVR_CPU_TYPE_NAME("xmega5");
>>> + case bfd_mach_avrxmega6:
>>> + return AVR_CPU_TYPE_NAME("xmega6");
>>> + case bfd_mach_avrxmega7:
>>> + return AVR_CPU_TYPE_NAME("xmega7");
>>> + default:
>>> + return def_cpu_type;
>>> + }
>>> +}
>>> +
>>> +DEFINE_TYPES(avr_cpu_type_info)
>>>
>>>
>> Hi! me again. Following the RC2 discussion. I've being looking in the GCC
>> definition of the architecture and as far as I can understand this
>> definitions are the generic definitions of the arch families.
>>
>> avr_arch_types[] =
>> {
>> /* unknown device specified */
>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
>> AVR_MMCU_DEFAULT },
>> /*
>> A M J LM E E E X R T d S FPO S O A
>> S U M PO L L I M A I a t lMff F ff r
>> M L P MV P P J E M N t a a s R s c
>> XW M M M G P Y a r s e e h
>> X P A D t h t t ID */
>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1" },
>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2" },
>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25" },
>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3" },
>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31" },
>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35" },
>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4" },
>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5" },
>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51" },
>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6" },
>>
>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100", "avrtiny"},
>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102", "avrxmega2"
>> },
>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103", "avrxmega3"
>> },
>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104", "avrxmega4"
>> },
>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105", "avrxmega5"
>> },
>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106", "avrxmega6"
>> },
>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107", "avrxmega7"
>> }
>> };
>>
>> And then you have features for the specific microcontrollers:
>>
>> AVR_ISA_RMW
>> AVR_SHORT_SP
>> AVR_ERRATA_SKIP
>> AVR_ISA_LDS
>> AVR_ISA_RCALL
>>
>> They are mixed in the file 'avr-mcus.def' for family and microcontroller
>> definition. Only looking at the family definition:
>>
>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
>> 0x0060, 0x0, 0x60000, 0)
>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x2000, 0)
>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x6000, 0)
>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
>> 0x0060, 0x0, 0x20000, 0)
>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
>> 0x0100, 0x0, 0x4000, 0)
>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x2000, 0)
>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x4000, 0)
>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
>> 0x0100, 0x0, 0x20000, 0)
>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
>> 0x0200, 0x0, 0x40000, 0)
>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x9000, 0)
>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
>> 0x3f00, 0x0, 0x8000, 0)
>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x11000, 0)
>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x11000, 0)
>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x60000, 0)
>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x22000, 0)
>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
>> 0x0040, 0x0, 0x400, 0)
>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x400, 0)
>>
>> I don't really understand how do you get to the proposed family
>> definition for qemu. Probably is my fault but if you can help me to
>> understand will be grate!
>>
>>
> Michal, can you really give us more details on how this mapping is done?
>
> I alredy asked a similar question a while ago, and then you said you used
> wikipedia article + avr datasheets. Can you give us more detailed info of
> the whole process of creating ABRFeature list for a particular AVR core
> type, and how that compares with the corresponding content in gcc, as
> Joakin brought to our attention?
>
> Thanks, Aleksandar
>
>
>
>
>> Regards,
>> --joa
>>
>
--
Best Regards,
Michael Rolnik
[-- Attachment #1.2: Type: text/html, Size: 36044 bytes --]
[-- Attachment #2: avr-instructions.md --]
[-- Type: text/markdown, Size: 12818 bytes --]
| MCU | DATASHEET URL |
|-------|-----------------|
|ALL |http://ww1.microchip.com/downloads/en/devicedoc/atmel-0856-avr-instruction-set-manual.pdf
|AVR1 |http://ww1.microchip.com/downloads/en/devicedoc/doc0838.pdf
|AVR2 |http://ww1.microchip.com/downloads/en/DeviceDoc/DOC0839.PDF
|AVR25 |http://ww1.microchip.com/downloads/en/DeviceDoc/doc8371.pdf
|AVR3 |
|AVR31 |http://ww1.microchip.com/downloads/en/DeviceDoc/doc0945.pdf
|AVR35 |http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8303-8-bit-AVR-Microcontroller-tinyAVR-ATtiny1634_Datasheet.pdf
|AVR4 |http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-7530-Automotive-Microcontrollers-ATmega48-ATmega88-ATmega168_Datasheet.pdf
|AVR5 |http://ww1.microchip.com/downloads/en/DeviceDoc/doc7734.pdf
|AVR51 |http://ww1.microchip.com/downloads/en/DeviceDoc/doc2467.pdf
|AVR6 |https://cdn.sparkfun.com/datasheets/Components/General%20IC/2549S.pdf
|XMEGA2 |http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8069-8-and-16-bit-AVR-AMEGA-A4-Microcontrollers_Datasheet.pdf
|XMEGA3 |http://ww1.microchip.com/downloads/en/DeviceDoc/40001911A.pdf
|XMEGA4 |http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8068-8-and16-bit-AVR-XMEGA-A3-Microcontrollers_Datasheet.pdf
|XMEGA5 |http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8385-8-and-16-bit-avr-microcontroller-atxmega64a1u-atxmega128a1u_datasheet.pdf
|XMEGA6 |http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8068-8-and16-bit-AVR-XMEGA-A3-Microcontrollers_Datasheet.pdf
|XMEGA7 |http://ww1.microchip.com/downloads/en/DeviceDoc/doc8077.pdf
|AVRTINY |http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8127-avr-8-bit-microcontroller-attiny4-attiny5-attiny9-attiny10_datasheet.pdf
----
| ALL | AVR1 | AVR2 | AVR25 |AVR3 | AVR31 | AVR35 | AVR4 | AVR5 | AVR6 | AVRTINY | XMEGA2 | XMAGA3 | XMAGA4 | XMAGA5 | XMAGA6 | XMAGA7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|ADC |ADC |ADC |ADC | |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC |ADC
|ADD |ADD |ADD |ADD | |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD |ADD
|ADIW | |ADIW |ADIW | |ADIW |ADIW |ADIW |ADIW |ADIW |ADIW | |ADIW |ADIW |ADIW |ADIW |ADIW |ADIW
|AND |AND |AND |AND | |AND |AND |AND |AND |AND |AND |AND |AND |AND |AND |AND |AND |AND
|ANDI |ANDI |ANDI |ANDI | |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI |ANDI
|ASR |ASR |ASR |ASR | |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR |ASR
|BCLR |BCLR |BCLR |BCLR | |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR |BCLR
|BLD |BLD |BLD |BLD | |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD |BLD
|BRBC |BRBC |BRBC |BRBC | |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC |BRBC
|BRBS |BRBS |BRBS |BRBS | |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS |BRBS
|BRCC |BRCC |BRCC |BRCC | |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC |BRCC
|BRCS |BRCS |BRCS |BRCS | |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS |BRCS
|BREAK | | |BREAK | | |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK |BREAK
|BREQ |BREQ |BREQ |BREQ | |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ |BREQ
|BRGE |BRGE |BRGE |BRGE | |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE |BRGE
|BRHC |BRHC |BRHC |BRHC | |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC |BRHC
|BRHS |BRHS |BRHS |BRHS | |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS |BRHS
|BRID |BRID |BRID |BRID | |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID |BRID
|BRIE |BRIE |BRIE |BRIE | |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE |BRIE
|BRLO |BRLO |BRLO |BRLO | |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO |BRLO
|BRLT |BRLT |BRLT |BRLT | |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT |BRLT
|BRMI |BRMI |BRMI |BRMI | |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI |BRMI
|BRNE |BRNE |BRNE |BRNE | |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE |BRNE
|BRPL |BRPL |BRPL |BRPL | |BRPL |BRPL |BRPL |BRPL |BRPL |BRPL |BRPL |BRPL | |BRPL |BRPL |BRPL |BRPL
|BRSH |BRSH |BRSH |BRSH | |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH |BRSH
|BRTC |BRTC |BRTC |BRTC | |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC |BRTC
|BRTS |BRTS |BRTS |BRTS | |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS |BRTS
|BRVC |BRVC |BRVC |BRVC | |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC |BRVC
|BRVS |BRVS |BRVS |BRVS | |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS |BRVS
|BSET |BSET |BSET |BSET | |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET |BSET
|BST |BST |BST |BST | |BST |BST |BST |BST |BST |BST |BST |BST |BST |BST |BST |BST |BST
|CALL | | | | |CALL |CALL |CALL |CALL |CALL |CALL | |CALL |CALL |CALL |CALL |CALL |CALL
|CBI |CBI |CBI |CBI | |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI |CBI
|CBR |CBR |CBR |CBR | |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR |CBR
|CLC |CLC |CLC |CLC | |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC |CLC
|CLH |CLH |CLH |CLH | |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH |CLH
|CLI |CLI |CLI |CLI | |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI |CLI
|CLN |CLN |CLN |CLN | |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN |CLN
|CLR |CLR |CLR |CLR | |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR |CLR
|CLS |CLS |CLS |CLS | |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS |CLS
|CLT |CLT |CLT |CLT | |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT |CLT
|CLV |CLV |CLV |CLV | |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV |CLV
|CLZ |CLZ |CLZ |CLZ | |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ |CLZ
|COM |COM |COM |COM | |COM |COM |COM |COM |COM |COM |COM |COM |COM |COM |COM |COM |COM
|CP |CP |CP |CP | |CP |CP |CP |CP |CP |CP |CP |CP |CP |CP |CP |CP |CP
|CPC |CPC |CPC |CPC | |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC |CPC
|CPI |CPI |CPI |CPI | |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI |CPI
|CPSE |CPSE |CPSE |CPSE | |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE |CPSE
|DEC |DEC |DEC |DEC | |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC |DEC
|DES | | | | | | | | | | | |DES | |DES |DES |DES |DES
|EICALL | | | | | | | | | |EICALL | |EICALL | |EICALL |EICALL |EICALL |EICALL
|EIJMP | | | | | | | | | |EIJMP | |EIJMP | |EIJMP |EIJMP |EIJMP |EIJMP
|EIND | | | | | | | | | | | |EIND | |EIND |EIND |EIND |EIND
|ELPM | | | | |ELPM | | | |ELPM |ELPM | |ELPM | |ELPM |ELPM |ELPM |ELPM
|EOR |EOR |EOR |EOR | |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR |EOR
|FMUL | | | | | | |FMUL |FMUL |FMUL |FMUL | |FMUL |FMUL |FMUL |FMUL |FMUL |FMUL
|FMULS | | | | | | |FMULS |FMULS |FMULS |FMULS | |FMULS |FMULS |FMULS |FMULS |FMULS |FMULS
|FMULSU | | | | | | |FMULSU |FMULSU |FMULSU |FMULSU | |FMULSU |FMULSU |FMULSU |FMULSU |FMULSU |FMULSU
|ICALL | |ICALL |ICALL | |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL |ICALL
|IJMP | |IJMP |IJMP | |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP |IJMP
|IN |IN |IN |IN | |IN |IN |IN |IN |IN |IN |IN |IN |IN |IN |IN |IN |IN
|INC |INC |INC |INC | |INC |INC |INC |INC |INC |INC |INC |INC |INC |INC |INC |INC |INC
|JMP | | | | |JMP |JMP |JMP |JMP |JMP |JMP | |JMP |JMP |JMP |JMP |JMP |JMP
|LAC | | | | | | | | | | | | | | |LAC | |
|LAS | | | | | | | | | | | | | | |LAS | |
|LAT | | | | | | | | | | | | | | |LAT | |
|LD |LD |LD |LD | |LD |LD |LD |LD |LD |LD |LD |LD |LD |LD |LD |LD |LD
|LDD | |LDD |LDD | |LDD |LDD |LDD |LDD |LDD |LDD | |LDD |LDD |LDD |LDD |LDD |LDD
|LDI |LDI |LDI |LDI | |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI |LDI
|LDS | |LDS |LDS | |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS |LDS
|LPM | |LPM |LPM | |LPM |LPM |LPM |LPM |LPM |LPM | |LPM |LPM |LPM |LPM |LPM |LPM
|LSL |LSL |LSL |LSL | |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL |LSL
|LSR |LSR |LSR |LSR | |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR |LSR
|MOV |MOV |MOV |MOV | |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV |MOV
|MOVW | | |MOVW | | |MOVW |MOVW |MOVW |MOVW |MOVW | |MOVW |MOVW |MOVW |MOVW |MOVW |MOVW
|MUL | | | | | | |MUL |MUL |MUL |MUL | |MUL |MUL |MUL |MUL |MUL |MUL
|MULS | | | | | | |MULS |MULS |MULS |MULS | |MULS |MULS |MULS |MULS |MULS |MULS
|MULSU | | | | | | |MULSU |MULSU |MULSU |MULSU | |MULSU |MULSU |MULSU |MULSU |MULSU |MULSU
|NEG |NEG |NEG |NEG | |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG |NEG
|NOP |NOP |NOP |NOP | |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP |NOP
|OR |OR |OR |OR | |OR |OR |OR |OR |OR |OR |OR |OR |OR |OR |OR |OR |OR
|ORI |ORI |ORI |ORI | |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI |ORI
|OUT |OUT |OUT |OUT | |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT |OUT
|POP | |POP |POP | |POP |POP |POP |POP |POP |POP |POP |POP |POP |POP |POP |POP |POP
|PUSH | |PUSH |PUSH | |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH |PUSH
|RCALL |RCALL |RCALL |RCALL | |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL |RCALL
|RET |RET |RET |RET | |RET |RET |RET |RET |RET |RET |RET |RET |RET |RET |RET |RET |RET
|RETI |RETI |RETI |RETI | |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI |RETI
|RJMP |RJMP |RJMP |RJMP | |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP |RJMP
|ROL |ROL |ROL |ROL | |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL |ROL
|ROR |ROR |ROR |ROR | |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR |ROR
|SBC |SBC |SBC |SBC | |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC |SBC
|SBCI |SBCI |SBCI |SBCI | |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI |SBCI
|SBI |SBI |SBI |SBI | |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI |SBI
|SBIC |SBIC |SBIC |SBIC | |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC |SBIC
|SBIS |SBIS |SBIS |SBIS | |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS |SBIS
|SBIW | |SBIW |SBIW | |SBIW |SBIW |SBIW |SBIW |SBIW |SBIW | |SBIW |SBIW |SBIW |SBIW |SBIW |SBIW
|SBR |SBR |SBR |SBR | |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR |SBR
|SBRC |SBRC |SBRC |SBRC | |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC |SBRC
|SBRS |SBRS |SBRS |SBRS | |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS |SBRS
|SEC |SEC |SEC |SEC | |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC |SEC
|SEH |SEH |SEH |SEH | |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH |SEH
|SEI |SEI |SEI |SEI | |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI |SEI
|SEN |SEN |SEN |SEN | |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN |SEN
|SER |SER |SER |SER | |SER |SER |SER |SER |SER |SER |SER |SER |SER |SER |SER |SER |SER
|SES |SES |SES |SES | |SES |SES |SES |SES |SES |SES |SES |SES |SES |SES |SES |SES |SES
|SET |SET |SET |SET | |SET |SET |SET |SET |SET |SET |SET |SET |SET |SET |SET |SET |SET
|SEV |SEV |SEV |SEV | |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV |SEV
|SEZ |SEZ |SEZ |SEZ | |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ |SEZ
|SLEEP |SLEEP |SLEEP |SLEEP | |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP |SLEEP
|SPM | | |SPM | | |SPM |SPM |SPM |SPM |SPM | |SPM | |SPM |SPM |SPM |SPM
|ST |ST |ST |ST | |ST |ST |ST |ST |ST |ST |ST |ST |ST |ST |ST |ST |ST
|STD | |STD |STD | |STD |STD |STD |STD |STD |STD | |STD |STD |STD |STD |STD |STD
|STS | |STS |STS | |STS |STS |STS |STS |STS |STS |STS |STS |STS |STS |STS |STS |STS
|SUB |SUB |SUB |SUB | |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB |SUB
|SUBI |SUBI |SUBI |SUBI | |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI |SUBI
|SWAP |SWAP |SWAP |SWAP | |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP |SWAP
|TST |TST |TST |TST | |TST |TST |TST |TST |TST |TST |TST |TST |TST |TST |TST |TST |TST
|WDR |WDR |WDR |WDR | |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR |WDR
|XCH | | | | | | | | | | | | | | |XCH | |
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-10 7:39 ` Michael Rolnik
@ 2020-02-21 11:03 ` Michael Rolnik
2020-02-21 15:31 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Michael Rolnik @ 2020-02-21 11:03 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
[-- Attachment #1: Type: text/plain, Size: 33075 bytes --]
Hi all.
How is it going?
Regards,
Michael.
On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik <mrolnik@gmail.com> wrote:
> Hi all.
>
> When I decided to implement AVR 8 bit CPU support for QEMU I found this
> document
> <http://ww1.microchip.com/downloads/en/devicedoc/atmel-0856-avr-instruction-set-manual.pdf> which
> listed all AVR instructions.
> After that I learned that there are several CPU flavours, I looked into
> this GCC file
> <https://github.com/gcc-mirror/gcc/blob/master/gcc/config/avr/avr-devices.c> to
> figure out what are they as I could not find any official document
> explaining it.
> Then I downloaded several datasheets and created a list of instructions by
> CPU type (attached).It turned out that there are some variations
> e.g.
> - AVTTINY - some have LDS, some don't
> - AVR1, AVR25 - some have short SP, some don't
> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 - some have RMW,
> some don't
> - AVRXMEGA3 - some have RCALL, some don't
>
> I decided to leave CPU flavour definition as suggested by GCC
> gcc/config/avr/avr-devices.c
> <https://github.com/gcc-mirror/gcc/blob/master/gcc/config/avr/avr-devices.c>
> file and when a specific MCU is created it will set / reset CPU features
> relevant to it.
>
> I hope this helps.
>
> Best Regards,
> Michael Rolnik
>
>
>
>
>
>
>
> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic <
> aleksandar.m.mail@gmail.com> wrote:
>
>>
>>
>> On Sunday, February 2, 2020, Joaquin de Andres <me@xcancerberox.com.ar>
>> wrote:
>>
>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
>>>
>>>> From: Michael Rolnik <mrolnik@gmail.com>
>>>>
>>>> AVR core types are:
>>>>
>>>> - avr1
>>>> - avr2
>>>> - avr25
>>>> - avr3
>>>> - avr31
>>>> - avr35
>>>> - avr4
>>>> - avr5
>>>> - avr51
>>>> - avr6
>>>> - avrtiny
>>>> - xmega2
>>>> - xmega3
>>>> - xmega4
>>>> - xmega5
>>>> - xmega6
>>>> - xmega7
>>>>
>>>> Each core type covers multiple AVR MCUs, mentioned in the comments
>>>> before definition of particular AVR core type (part of this patch).
>>>>
>>>> AVR core type defines shared features that are valid for all AVR
>>>> MCUs belonging in that type.
>>>>
>>>> [AM: Split a larger AVR introduction patch into logical units]
>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>>
>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>>> Acked-by: Igor Mammedov <imammedo@redhat.com>
>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>> ---
>>>> target/avr/cpu.c | 601
>>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 601 insertions(+)
>>>>
>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
>>>> index f41a887..e0ae055 100644
>>>> --- a/target/avr/cpu.c
>>>> +++ b/target/avr/cpu.c
>>>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc,
>>>> void *data)
>>>> cc->gdb_num_core_regs = 35;
>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
>>>> }
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr1
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
>>>> + */
>>>> +static void avr_avr1_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr2
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26,
>>>> at90s4414,
>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
>>>> + */
>>>> +static void avr_avr2_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr25
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a,
>>>> attiny24,
>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84,
>>>> attiny84a,
>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461,
>>>> attiny461a,
>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88,
>>>> attiny828,
>>>> + * attiny841, at86rf401
>>>> + */
>>>> +static void avr_avr25_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr3
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * at43usb355, at76c711
>>>> + */
>>>> +static void avr_avr3_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr31
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atmega103, at43usb320
>>>> + */
>>>> +static void avr_avr31_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr35
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2,
>>>> atmega16u2,
>>>> + * atmega32u2, attiny167, attiny1634
>>>> + */
>>>> +static void avr_avr35_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr4
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48,
>>>> atmega48a,
>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva,
>>>> at90pwm1,
>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
>>>> + */
>>>> +static void avr_avr4_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr5
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831,
>>>> ata6613c,
>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161,
>>>> atmega162,
>>>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165,
>>>> atmega165a,
>>>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p,
>>>> atmega168pa,
>>>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa,
>>>> atmega16hvb,
>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32,
>>>> atmega323,
>>>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a,
>>>> atmega325p,
>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa,
>>>> atmega328,
>>>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p,
>>>> atmega329pa,
>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1,
>>>> atmega32m1,
>>>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640,
>>>> atmega644,
>>>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a,
>>>> atmega645p,
>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a,
>>>> atmega649p,
>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a,
>>>> atmega6490p,
>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161,
>>>> at90pwm216,
>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
>>>> + */
>>>> +static void avr_avr5_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr51
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284,
>>>> atmega1284p,
>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128,
>>>> at90usb1286,
>>>> + * at90usb1287
>>>> + */
>>>> +static void avr_avr51_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avr6
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
>>>> + */
>>>> +static void avr_avr6_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type avrtiny
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
>>>> + */
>>>> +static void avr_avrtiny_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega2
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4,
>>>> atxmega32c3,
>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
>>>> + * atxmega32c4, atxmega32e5
>>>> + */
>>>> +static void avr_xmega2_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega3
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417,
>>>> attiny814,
>>>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617,
>>>> attiny3214,
>>>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608,
>>>> atmega1609,
>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
>>>> + */
>>>> +static void avr_xmega3_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega4
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
>>>> + */
>>>> +static void avr_xmega4_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega5
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atxmega64a1, atxmega64a1u
>>>> + */
>>>> +static void avr_xmega5_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega6
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3,
>>>> atxmega256a3,
>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u,
>>>> atxmega128b1,
>>>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u,
>>>> atxmega192c3,
>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
>>>> + */
>>>> +static void avr_xmega6_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Setting features of AVR core type xmega7
>>>> + * --------------------------------------
>>>> + *
>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>> + *
>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
>>>> + */
>>>> +static void avr_xmega7_initfn(Object *obj)
>>>> +{
>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>> + CPUAVRState *env = &cpu->env;
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>> +
>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>> +}
>>>> +
>>>> +typedef struct AVRCPUInfo {
>>>> + const char *name;
>>>> + void (*initfn)(Object *obj);
>>>> +} AVRCPUInfo;
>>>> +
>>>> +
>>>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
>>>> +{
>>>> + const char *typename = object_class_get_name(OBJECT_CLASS(data));
>>>> +
>>>> + qemu_printf("%s\n", typename);
>>>> +}
>>>> +
>>>> +void avr_cpu_list(void)
>>>> +{
>>>> + GSList *list;
>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
>>>> + g_slist_free(list);
>>>> +}
>>>> +
>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
>>>> + { \
>>>> + .parent = TYPE_AVR_CPU, \
>>>> + .instance_init = initfn, \
>>>> + .name = AVR_CPU_TYPE_NAME(model), \
>>>> + }
>>>> +
>>>> +static const TypeInfo avr_cpu_type_info[] = {
>>>> + {
>>>> + .name = TYPE_AVR_CPU,
>>>> + .parent = TYPE_CPU,
>>>> + .instance_size = sizeof(AVRCPU),
>>>> + .instance_init = avr_cpu_initfn,
>>>> + .class_size = sizeof(AVRCPUClass),
>>>> + .class_init = avr_cpu_class_init,
>>>> + .abstract = true,
>>>> + },
>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
>>>> +};
>>>> +
>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char
>>>> *def_cpu_type)
>>>> +{
>>>> + switch (flags & EF_AVR_MACH) {
>>>> + case bfd_mach_avr1:
>>>> + return AVR_CPU_TYPE_NAME("avr1");
>>>> + case bfd_mach_avr2:
>>>> + return AVR_CPU_TYPE_NAME("avr2");
>>>> + case bfd_mach_avr25:
>>>> + return AVR_CPU_TYPE_NAME("avr25");
>>>> + case bfd_mach_avr3:
>>>> + return AVR_CPU_TYPE_NAME("avr3");
>>>> + case bfd_mach_avr31:
>>>> + return AVR_CPU_TYPE_NAME("avr31");
>>>> + case bfd_mach_avr35:
>>>> + return AVR_CPU_TYPE_NAME("avr35");
>>>> + case bfd_mach_avr4:
>>>> + return AVR_CPU_TYPE_NAME("avr4");
>>>> + case bfd_mach_avr5:
>>>> + return AVR_CPU_TYPE_NAME("avr5");
>>>> + case bfd_mach_avr51:
>>>> + return AVR_CPU_TYPE_NAME("avr51");
>>>> + case bfd_mach_avr6:
>>>> + return AVR_CPU_TYPE_NAME("avr6");
>>>> + case bfd_mach_avrtiny:
>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
>>>> + case bfd_mach_avrxmega2:
>>>> + return AVR_CPU_TYPE_NAME("xmega2");
>>>> + case bfd_mach_avrxmega3:
>>>> + return AVR_CPU_TYPE_NAME("xmega3");
>>>> + case bfd_mach_avrxmega4:
>>>> + return AVR_CPU_TYPE_NAME("xmega4");
>>>> + case bfd_mach_avrxmega5:
>>>> + return AVR_CPU_TYPE_NAME("xmega5");
>>>> + case bfd_mach_avrxmega6:
>>>> + return AVR_CPU_TYPE_NAME("xmega6");
>>>> + case bfd_mach_avrxmega7:
>>>> + return AVR_CPU_TYPE_NAME("xmega7");
>>>> + default:
>>>> + return def_cpu_type;
>>>> + }
>>>> +}
>>>> +
>>>> +DEFINE_TYPES(avr_cpu_type_info)
>>>>
>>>>
>>> Hi! me again. Following the RC2 discussion. I've being looking in the
>>> GCC definition of the architecture and as far as I can understand this
>>> definitions are the generic definitions of the arch families.
>>>
>>> avr_arch_types[] =
>>> {
>>> /* unknown device specified */
>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
>>> AVR_MMCU_DEFAULT },
>>> /*
>>> A M J LM E E E X R T d S FPO S O A
>>> S U M PO L L I M A I a t lMff F ff r
>>> M L P MV P P J E M N t a a s R s c
>>> XW M M M G P Y a r s e e h
>>> X P A D t h t t ID */
>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1" },
>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2" },
>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25" },
>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3" },
>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31" },
>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35" },
>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4" },
>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5" },
>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51" },
>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6" },
>>>
>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100", "avrtiny"},
>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102", "avrxmega2"
>>> },
>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103", "avrxmega3"
>>> },
>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104", "avrxmega4"
>>> },
>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105", "avrxmega5"
>>> },
>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106", "avrxmega6"
>>> },
>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107",
>>> "avrxmega7" }
>>> };
>>>
>>> And then you have features for the specific microcontrollers:
>>>
>>> AVR_ISA_RMW
>>> AVR_SHORT_SP
>>> AVR_ERRATA_SKIP
>>> AVR_ISA_LDS
>>> AVR_ISA_RCALL
>>>
>>> They are mixed in the file 'avr-mcus.def' for family and microcontroller
>>> definition. Only looking at the family definition:
>>>
>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
>>> 0x0060, 0x0, 0x60000, 0)
>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
>>> 0x0060, 0x0, 0x2000, 0)
>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
>>> 0x0060, 0x0, 0x6000, 0)
>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
>>> 0x0060, 0x0, 0x20000, 0)
>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
>>> 0x0100, 0x0, 0x4000, 0)
>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
>>> 0x0060, 0x0, 0x2000, 0)
>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
>>> 0x0060, 0x0, 0x4000, 0)
>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
>>> 0x0100, 0x0, 0x20000, 0)
>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
>>> 0x0200, 0x0, 0x40000, 0)
>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
>>> 0x2000, 0x0, 0x9000, 0)
>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
>>> 0x3f00, 0x0, 0x8000, 0)
>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
>>> 0x2000, 0x0, 0x11000, 0)
>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
>>> 0x2000, 0x0, 0x11000, 0)
>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
>>> 0x2000, 0x0, 0x60000, 0)
>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
>>> 0x2000, 0x0, 0x22000, 0)
>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
>>> 0x0040, 0x0, 0x400, 0)
>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
>>> 0x0060, 0x0, 0x400, 0)
>>>
>>> I don't really understand how do you get to the proposed family
>>> definition for qemu. Probably is my fault but if you can help me to
>>> understand will be grate!
>>>
>>>
>> Michal, can you really give us more details on how this mapping is done?
>>
>> I alredy asked a similar question a while ago, and then you said you used
>> wikipedia article + avr datasheets. Can you give us more detailed info of
>> the whole process of creating ABRFeature list for a particular AVR core
>> type, and how that compares with the corresponding content in gcc, as
>> Joakin brought to our attention?
>>
>> Thanks, Aleksandar
>>
>>
>>
>>
>>> Regards,
>>> --joa
>>>
>>
>
> --
> Best Regards,
> Michael Rolnik
>
--
Best Regards,
Michael Rolnik
[-- Attachment #2: Type: text/html, Size: 36654 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-21 11:03 ` Michael Rolnik
@ 2020-02-21 15:31 ` Aleksandar Markovic
2020-02-27 8:38 ` Michael Rolnik
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-02-21 15:31 UTC (permalink / raw)
To: Michael Rolnik
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
On Fri, Feb 21, 2020 at 12:04 PM Michael Rolnik <mrolnik@gmail.com> wrote:
>
> Hi all.
>
> How is it going?
>
> Regards,
> Michael.
>
Michael,
I think we are very close to merging.
There is absolutely no need to support ALL AVR mcus or AVR core types
in the first version that will be merged.
But this issue (recently discovered during Jaoquin's review) about the
fact that an avr core type doesn't determine in a complete way the
instruction set of a particular MCU is thorny.
Should we switch from "-cpu <avr core type>" to "-cpu <mcu>" (but keep
the current avr core type organization for internal purpose)? Or
something else?
This is a high-level AVR suppot design issue. Let's think about it
without a rush.
The problem is that once one organization/meaning of that switch is
upstreamed, it is very difficult to switch to other. There is a
procedural rule that deprecation process lasts at least 8 months, plus
there may be some technical obstacles and difficulties.
In short, "-cpu <avr core type>" is not enough to emulate accurately a
givem program.
Regards,
Aleksandar
> On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik <mrolnik@gmail.com> wrote:
>>
>> Hi all.
>>
>> When I decided to implement AVR 8 bit CPU support for QEMU I found this document which listed all AVR instructions.
>> After that I learned that there are several CPU flavours, I looked into this GCC file to figure out what are they as I could not find any official document explaining it.
>> Then I downloaded several datasheets and created a list of instructions by CPU type (attached).It turned out that there are some variations
>> e.g.
>> - AVTTINY - some have LDS, some don't
>> - AVR1, AVR25 - some have short SP, some don't
>> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 - some have RMW, some don't
>> - AVRXMEGA3 - some have RCALL, some don't
>>
>> I decided to leave CPU flavour definition as suggested by GCC gcc/config/avr/avr-devices.c file and when a specific MCU is created it will set / reset CPU features relevant to it.
>>
>> I hope this helps.
>>
>> Best Regards,
>> Michael Rolnik
>>
>>
>>
>>
>>
>>
>>
>> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic <aleksandar.m.mail@gmail.com> wrote:
>>>
>>>
>>>
>>> On Sunday, February 2, 2020, Joaquin de Andres <me@xcancerberox.com.ar> wrote:
>>>>
>>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
>>>>>
>>>>> From: Michael Rolnik <mrolnik@gmail.com>
>>>>>
>>>>> AVR core types are:
>>>>>
>>>>> - avr1
>>>>> - avr2
>>>>> - avr25
>>>>> - avr3
>>>>> - avr31
>>>>> - avr35
>>>>> - avr4
>>>>> - avr5
>>>>> - avr51
>>>>> - avr6
>>>>> - avrtiny
>>>>> - xmega2
>>>>> - xmega3
>>>>> - xmega4
>>>>> - xmega5
>>>>> - xmega6
>>>>> - xmega7
>>>>>
>>>>> Each core type covers multiple AVR MCUs, mentioned in the comments
>>>>> before definition of particular AVR core type (part of this patch).
>>>>>
>>>>> AVR core type defines shared features that are valid for all AVR
>>>>> MCUs belonging in that type.
>>>>>
>>>>> [AM: Split a larger AVR introduction patch into logical units]
>>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>>>
>>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
>>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>>>>> Acked-by: Igor Mammedov <imammedo@redhat.com>
>>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>>> ---
>>>>> target/avr/cpu.c | 601 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> 1 file changed, 601 insertions(+)
>>>>>
>>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
>>>>> index f41a887..e0ae055 100644
>>>>> --- a/target/avr/cpu.c
>>>>> +++ b/target/avr/cpu.c
>>>>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass *oc, void *data)
>>>>> cc->gdb_num_core_regs = 35;
>>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
>>>>> }
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr1
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
>>>>> + */
>>>>> +static void avr_avr1_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr2
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26, at90s4414,
>>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
>>>>> + */
>>>>> +static void avr_avr2_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr25
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a, attiny24,
>>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84, attiny84a,
>>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461, attiny461a,
>>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88, attiny828,
>>>>> + * attiny841, at86rf401
>>>>> + */
>>>>> +static void avr_avr25_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr3
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * at43usb355, at76c711
>>>>> + */
>>>>> +static void avr_avr3_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr31
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atmega103, at43usb320
>>>>> + */
>>>>> +static void avr_avr31_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr35
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2, atmega16u2,
>>>>> + * atmega32u2, attiny167, attiny1634
>>>>> + */
>>>>> +static void avr_avr35_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr4
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a, atmega48, atmega48a,
>>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a, atmega88p,
>>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva, at90pwm1,
>>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
>>>>> + */
>>>>> +static void avr_avr4_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr5
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795, ata5831, ata6613c,
>>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161, atmega162,
>>>>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165, atmega165a,
>>>>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p, atmega168pa,
>>>>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa, atmega16hvb,
>>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32, atmega323,
>>>>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a, atmega325p,
>>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa, atmega328,
>>>>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p, atmega329pa,
>>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1, atmega32m1,
>>>>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a, atmega640, atmega644,
>>>>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a, atmega645p,
>>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a, atmega649p,
>>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a, atmega6490p,
>>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
>>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64, at90pwm161, at90pwm216,
>>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
>>>>> + */
>>>>> +static void avr_avr5_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr51
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284, atmega1284p,
>>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128, at90usb1286,
>>>>> + * at90usb1287
>>>>> + */
>>>>> +static void avr_avr51_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avr6
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
>>>>> + */
>>>>> +static void avr_avr6_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type avrtiny
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
>>>>> + */
>>>>> +static void avr_avrtiny_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega2
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4, atxmega32c3,
>>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4, atxmega32a4u,
>>>>> + * atxmega32c4, atxmega32e5
>>>>> + */
>>>>> +static void avr_xmega2_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega3
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416, attiny417, attiny814,
>>>>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617, attiny3214,
>>>>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608, atmega1609,
>>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
>>>>> + */
>>>>> +static void avr_xmega3_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega4
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u, atxmega64b1,
>>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
>>>>> + */
>>>>> +static void avr_xmega4_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega5
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atxmega64a1, atxmega64a1u
>>>>> + */
>>>>> +static void avr_xmega5_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega6
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3, atxmega256a3,
>>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u, atxmega128b1,
>>>>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u, atxmega192c3,
>>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
>>>>> + */
>>>>> +static void avr_xmega6_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Setting features of AVR core type xmega7
>>>>> + * --------------------------------------
>>>>> + *
>>>>> + * This type of AVR core is present in the following AVR MCUs:
>>>>> + *
>>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
>>>>> + */
>>>>> +static void avr_xmega7_initfn(Object *obj)
>>>>> +{
>>>>> + AVRCPU *cpu = AVR_CPU(obj);
>>>>> + CPUAVRState *env = &cpu->env;
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>>>>> +
>>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>>>>> +}
>>>>> +
>>>>> +typedef struct AVRCPUInfo {
>>>>> + const char *name;
>>>>> + void (*initfn)(Object *obj);
>>>>> +} AVRCPUInfo;
>>>>> +
>>>>> +
>>>>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
>>>>> +{
>>>>> + const char *typename = object_class_get_name(OBJECT_CLASS(data));
>>>>> +
>>>>> + qemu_printf("%s\n", typename);
>>>>> +}
>>>>> +
>>>>> +void avr_cpu_list(void)
>>>>> +{
>>>>> + GSList *list;
>>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
>>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
>>>>> + g_slist_free(list);
>>>>> +}
>>>>> +
>>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
>>>>> + { \
>>>>> + .parent = TYPE_AVR_CPU, \
>>>>> + .instance_init = initfn, \
>>>>> + .name = AVR_CPU_TYPE_NAME(model), \
>>>>> + }
>>>>> +
>>>>> +static const TypeInfo avr_cpu_type_info[] = {
>>>>> + {
>>>>> + .name = TYPE_AVR_CPU,
>>>>> + .parent = TYPE_CPU,
>>>>> + .instance_size = sizeof(AVRCPU),
>>>>> + .instance_init = avr_cpu_initfn,
>>>>> + .class_size = sizeof(AVRCPUClass),
>>>>> + .class_init = avr_cpu_class_init,
>>>>> + .abstract = true,
>>>>> + },
>>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
>>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
>>>>> +};
>>>>> +
>>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char *def_cpu_type)
>>>>> +{
>>>>> + switch (flags & EF_AVR_MACH) {
>>>>> + case bfd_mach_avr1:
>>>>> + return AVR_CPU_TYPE_NAME("avr1");
>>>>> + case bfd_mach_avr2:
>>>>> + return AVR_CPU_TYPE_NAME("avr2");
>>>>> + case bfd_mach_avr25:
>>>>> + return AVR_CPU_TYPE_NAME("avr25");
>>>>> + case bfd_mach_avr3:
>>>>> + return AVR_CPU_TYPE_NAME("avr3");
>>>>> + case bfd_mach_avr31:
>>>>> + return AVR_CPU_TYPE_NAME("avr31");
>>>>> + case bfd_mach_avr35:
>>>>> + return AVR_CPU_TYPE_NAME("avr35");
>>>>> + case bfd_mach_avr4:
>>>>> + return AVR_CPU_TYPE_NAME("avr4");
>>>>> + case bfd_mach_avr5:
>>>>> + return AVR_CPU_TYPE_NAME("avr5");
>>>>> + case bfd_mach_avr51:
>>>>> + return AVR_CPU_TYPE_NAME("avr51");
>>>>> + case bfd_mach_avr6:
>>>>> + return AVR_CPU_TYPE_NAME("avr6");
>>>>> + case bfd_mach_avrtiny:
>>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
>>>>> + case bfd_mach_avrxmega2:
>>>>> + return AVR_CPU_TYPE_NAME("xmega2");
>>>>> + case bfd_mach_avrxmega3:
>>>>> + return AVR_CPU_TYPE_NAME("xmega3");
>>>>> + case bfd_mach_avrxmega4:
>>>>> + return AVR_CPU_TYPE_NAME("xmega4");
>>>>> + case bfd_mach_avrxmega5:
>>>>> + return AVR_CPU_TYPE_NAME("xmega5");
>>>>> + case bfd_mach_avrxmega6:
>>>>> + return AVR_CPU_TYPE_NAME("xmega6");
>>>>> + case bfd_mach_avrxmega7:
>>>>> + return AVR_CPU_TYPE_NAME("xmega7");
>>>>> + default:
>>>>> + return def_cpu_type;
>>>>> + }
>>>>> +}
>>>>> +
>>>>> +DEFINE_TYPES(avr_cpu_type_info)
>>>>>
>>>>
>>>> Hi! me again. Following the RC2 discussion. I've being looking in the GCC definition of the architecture and as far as I can understand this definitions are the generic definitions of the arch families.
>>>>
>>>> avr_arch_types[] =
>>>> {
>>>> /* unknown device specified */
>>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL, AVR_MMCU_DEFAULT },
>>>> /*
>>>> A M J LM E E E X R T d S FPO S O A
>>>> S U M PO L L I M A I a t lMff F ff r
>>>> M L P MV P P J E M N t a a s R s c
>>>> XW M M M G P Y a r s e e h
>>>> X P A D t h t t ID */
>>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1" },
>>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2" },
>>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25" },
>>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3" },
>>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31" },
>>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35" },
>>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4" },
>>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5" },
>>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51" },
>>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6" },
>>>>
>>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100", "avrtiny"},
>>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102", "avrxmega2" },
>>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103", "avrxmega3" },
>>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104", "avrxmega4" },
>>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105", "avrxmega5" },
>>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106", "avrxmega6" },
>>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107", "avrxmega7" }
>>>> };
>>>>
>>>> And then you have features for the specific microcontrollers:
>>>>
>>>> AVR_ISA_RMW
>>>> AVR_SHORT_SP
>>>> AVR_ERRATA_SKIP
>>>> AVR_ISA_LDS
>>>> AVR_ISA_RCALL
>>>>
>>>> They are mixed in the file 'avr-mcus.def' for family and microcontroller definition. Only looking at the family definition:
>>>>
>>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL, 0x0060, 0x0, 0x60000, 0)
>>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL, 0x0060, 0x0, 0x2000, 0)
>>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL, 0x0060, 0x0, 0x6000, 0)
>>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL, 0x0060, 0x0, 0x20000, 0)
>>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL, 0x0100, 0x0, 0x4000, 0)
>>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL, 0x0060, 0x0, 0x2000, 0)
>>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL, 0x0060, 0x0, 0x4000, 0)
>>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL, 0x0100, 0x0, 0x20000, 0)
>>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL, 0x0200, 0x0, 0x40000, 0)
>>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL, 0x2000, 0x0, 0x9000, 0)
>>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL, 0x3f00, 0x0, 0x8000, 0)
>>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL, 0x2000, 0x0, 0x11000, 0)
>>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL, 0x2000, 0x0, 0x11000, 0)
>>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL, 0x2000, 0x0, 0x60000, 0)
>>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL, 0x2000, 0x0, 0x22000, 0)
>>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL, 0x0040, 0x0, 0x400, 0)
>>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL, 0x0060, 0x0, 0x400, 0)
>>>>
>>>> I don't really understand how do you get to the proposed family definition for qemu. Probably is my fault but if you can help me to understand will be grate!
>>>>
>>>
>>> Michal, can you really give us more details on how this mapping is done?
>>>
>>> I alredy asked a similar question a while ago, and then you said you used wikipedia article + avr datasheets. Can you give us more detailed info of the whole process of creating ABRFeature list for a particular AVR core type, and how that compares with the corresponding content in gcc, as Joakin brought to our attention?
>>>
>>> Thanks, Aleksandar
>>>
>>>
>>>
>>>>
>>>> Regards,
>>>> --joa
>>
>>
>>
>> --
>> Best Regards,
>> Michael Rolnik
>
>
>
> --
> Best Regards,
> Michael Rolnik
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-21 15:31 ` Aleksandar Markovic
@ 2020-02-27 8:38 ` Michael Rolnik
2020-03-06 13:34 ` Michael Rolnik
0 siblings, 1 reply; 70+ messages in thread
From: Michael Rolnik @ 2020-02-27 8:38 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
[-- Attachment #1: Type: text/plain, Size: 36643 bytes --]
Hi all.
I don't see how the fact that some MCUs have an instruction and some don't
within same AVR family.
Think about gnu binutils (not GCC) these utils have no idea about MCUs all
they are aware of AVR CPU only.
However, I don't mind removing -cpu flag.
Regards,
Michael Ronik
On Fri, Feb 21, 2020 at 5:31 PM Aleksandar Markovic <
aleksandar.m.mail@gmail.com> wrote:
> On Fri, Feb 21, 2020 at 12:04 PM Michael Rolnik <mrolnik@gmail.com> wrote:
> >
> > Hi all.
> >
> > How is it going?
> >
> > Regards,
> > Michael.
> >
>
> Michael,
>
> I think we are very close to merging.
>
> There is absolutely no need to support ALL AVR mcus or AVR core types
> in the first version that will be merged.
>
> But this issue (recently discovered during Jaoquin's review) about the
> fact that an avr core type doesn't determine in a complete way the
> instruction set of a particular MCU is thorny.
>
> Should we switch from "-cpu <avr core type>" to "-cpu <mcu>" (but keep
> the current avr core type organization for internal purpose)? Or
> something else?
>
> This is a high-level AVR suppot design issue. Let's think about it
> without a rush.
>
> The problem is that once one organization/meaning of that switch is
> upstreamed, it is very difficult to switch to other. There is a
> procedural rule that deprecation process lasts at least 8 months, plus
> there may be some technical obstacles and difficulties.
>
> In short, "-cpu <avr core type>" is not enough to emulate accurately a
> givem program.
>
> Regards,
> Aleksandar
>
> > On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik <mrolnik@gmail.com>
> wrote:
> >>
> >> Hi all.
> >>
> >> When I decided to implement AVR 8 bit CPU support for QEMU I found this
> document which listed all AVR instructions.
> >> After that I learned that there are several CPU flavours, I looked into
> this GCC file to figure out what are they as I could not find any official
> document explaining it.
> >> Then I downloaded several datasheets and created a list of instructions
> by CPU type (attached).It turned out that there are some variations
> >> e.g.
> >> - AVTTINY - some have LDS, some don't
> >> - AVR1, AVR25 - some have short SP, some don't
> >> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 - some have
> RMW, some don't
> >> - AVRXMEGA3 - some have RCALL, some don't
> >>
> >> I decided to leave CPU flavour definition as suggested by GCC
> gcc/config/avr/avr-devices.c file and when a specific MCU is created it
> will set / reset CPU features relevant to it.
> >>
> >> I hope this helps.
> >>
> >> Best Regards,
> >> Michael Rolnik
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic <
> aleksandar.m.mail@gmail.com> wrote:
> >>>
> >>>
> >>>
> >>> On Sunday, February 2, 2020, Joaquin de Andres <me@xcancerberox.com.ar>
> wrote:
> >>>>
> >>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
> >>>>>
> >>>>> From: Michael Rolnik <mrolnik@gmail.com>
> >>>>>
> >>>>> AVR core types are:
> >>>>>
> >>>>> - avr1
> >>>>> - avr2
> >>>>> - avr25
> >>>>> - avr3
> >>>>> - avr31
> >>>>> - avr35
> >>>>> - avr4
> >>>>> - avr5
> >>>>> - avr51
> >>>>> - avr6
> >>>>> - avrtiny
> >>>>> - xmega2
> >>>>> - xmega3
> >>>>> - xmega4
> >>>>> - xmega5
> >>>>> - xmega6
> >>>>> - xmega7
> >>>>>
> >>>>> Each core type covers multiple AVR MCUs, mentioned in the comments
> >>>>> before definition of particular AVR core type (part of this patch).
> >>>>>
> >>>>> AVR core type defines shared features that are valid for all AVR
> >>>>> MCUs belonging in that type.
> >>>>>
> >>>>> [AM: Split a larger AVR introduction patch into logical units]
> >>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>>>>
> >>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
> >>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> >>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> >>>>> Acked-by: Igor Mammedov <imammedo@redhat.com>
> >>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> >>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> >>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>>>> ---
> >>>>> target/avr/cpu.c | 601
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>> 1 file changed, 601 insertions(+)
> >>>>>
> >>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
> >>>>> index f41a887..e0ae055 100644
> >>>>> --- a/target/avr/cpu.c
> >>>>> +++ b/target/avr/cpu.c
> >>>>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass
> *oc, void *data)
> >>>>> cc->gdb_num_core_regs = 35;
> >>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
> >>>>> }
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr1
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
> >>>>> + */
> >>>>> +static void avr_avr1_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26,
> at90s4414,
> >>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
> >>>>> + */
> >>>>> +static void avr_avr2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr25
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313, attiny2313a,
> attiny24,
> >>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441, attiny84,
> attiny84a,
> >>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461,
> attiny461a,
> >>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88,
> attiny828,
> >>>>> + * attiny841, at86rf401
> >>>>> + */
> >>>>> +static void avr_avr25_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * at43usb355, at76c711
> >>>>> + */
> >>>>> +static void avr_avr3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr31
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atmega103, at43usb320
> >>>>> + */
> >>>>> +static void avr_avr31_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr35
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2,
> atmega16u2,
> >>>>> + * atmega32u2, attiny167, attiny1634
> >>>>> + */
> >>>>> +static void avr_avr35_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a,
> atmega48, atmega48a,
> >>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a,
> atmega88p,
> >>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva,
> at90pwm1,
> >>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
> >>>>> + */
> >>>>> +static void avr_avr4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795,
> ata5831, ata6613c,
> >>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161,
> atmega162,
> >>>>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165,
> atmega165a,
> >>>>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p,
> atmega168pa,
> >>>>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa,
> atmega16hvb,
> >>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32,
> atmega323,
> >>>>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a,
> atmega325p,
> >>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p, atmega3250pa,
> atmega328,
> >>>>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p,
> atmega329pa,
> >>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1,
> atmega32m1,
> >>>>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a,
> atmega640, atmega644,
> >>>>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a,
> atmega645p,
> >>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a,
> atmega649p,
> >>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb, atmega6490a,
> atmega6490p,
> >>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
> >>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64,
> at90pwm161, at90pwm216,
> >>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
> >>>>> + */
> >>>>> +static void avr_avr5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr51
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284,
> atmega1284p,
> >>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128,
> at90usb1286,
> >>>>> + * at90usb1287
> >>>>> + */
> >>>>> +static void avr_avr51_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
> >>>>> + */
> >>>>> +static void avr_avr6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avrtiny
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
> >>>>> + */
> >>>>> +static void avr_avrtiny_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4,
> atxmega32c3,
> >>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4,
> atxmega32a4u,
> >>>>> + * atxmega32c4, atxmega32e5
> >>>>> + */
> >>>>> +static void avr_xmega2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416,
> attiny417, attiny814,
> >>>>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617,
> attiny3214,
> >>>>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608,
> atmega1609,
> >>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
> >>>>> + */
> >>>>> +static void avr_xmega3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u,
> atxmega64b1,
> >>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
> >>>>> + */
> >>>>> +static void avr_xmega4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atxmega64a1, atxmega64a1u
> >>>>> + */
> >>>>> +static void avr_xmega5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3,
> atxmega256a3,
> >>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u,
> atxmega128b1,
> >>>>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u,
> atxmega192c3,
> >>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
> >>>>> + */
> >>>>> +static void avr_xmega6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega7
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR MCUs:
> >>>>> + *
> >>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
> >>>>> + */
> >>>>> +static void avr_xmega7_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +typedef struct AVRCPUInfo {
> >>>>> + const char *name;
> >>>>> + void (*initfn)(Object *obj);
> >>>>> +} AVRCPUInfo;
> >>>>> +
> >>>>> +
> >>>>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
> >>>>> +{
> >>>>> + const char *typename =
> object_class_get_name(OBJECT_CLASS(data));
> >>>>> +
> >>>>> + qemu_printf("%s\n", typename);
> >>>>> +}
> >>>>> +
> >>>>> +void avr_cpu_list(void)
> >>>>> +{
> >>>>> + GSList *list;
> >>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
> >>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
> >>>>> + g_slist_free(list);
> >>>>> +}
> >>>>> +
> >>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
> >>>>> + { \
> >>>>> + .parent = TYPE_AVR_CPU, \
> >>>>> + .instance_init = initfn, \
> >>>>> + .name = AVR_CPU_TYPE_NAME(model), \
> >>>>> + }
> >>>>> +
> >>>>> +static const TypeInfo avr_cpu_type_info[] = {
> >>>>> + {
> >>>>> + .name = TYPE_AVR_CPU,
> >>>>> + .parent = TYPE_CPU,
> >>>>> + .instance_size = sizeof(AVRCPU),
> >>>>> + .instance_init = avr_cpu_initfn,
> >>>>> + .class_size = sizeof(AVRCPUClass),
> >>>>> + .class_init = avr_cpu_class_init,
> >>>>> + .abstract = true,
> >>>>> + },
> >>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
> >>>>> +};
> >>>>> +
> >>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char
> *def_cpu_type)
> >>>>> +{
> >>>>> + switch (flags & EF_AVR_MACH) {
> >>>>> + case bfd_mach_avr1:
> >>>>> + return AVR_CPU_TYPE_NAME("avr1");
> >>>>> + case bfd_mach_avr2:
> >>>>> + return AVR_CPU_TYPE_NAME("avr2");
> >>>>> + case bfd_mach_avr25:
> >>>>> + return AVR_CPU_TYPE_NAME("avr25");
> >>>>> + case bfd_mach_avr3:
> >>>>> + return AVR_CPU_TYPE_NAME("avr3");
> >>>>> + case bfd_mach_avr31:
> >>>>> + return AVR_CPU_TYPE_NAME("avr31");
> >>>>> + case bfd_mach_avr35:
> >>>>> + return AVR_CPU_TYPE_NAME("avr35");
> >>>>> + case bfd_mach_avr4:
> >>>>> + return AVR_CPU_TYPE_NAME("avr4");
> >>>>> + case bfd_mach_avr5:
> >>>>> + return AVR_CPU_TYPE_NAME("avr5");
> >>>>> + case bfd_mach_avr51:
> >>>>> + return AVR_CPU_TYPE_NAME("avr51");
> >>>>> + case bfd_mach_avr6:
> >>>>> + return AVR_CPU_TYPE_NAME("avr6");
> >>>>> + case bfd_mach_avrtiny:
> >>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
> >>>>> + case bfd_mach_avrxmega2:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega2");
> >>>>> + case bfd_mach_avrxmega3:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega3");
> >>>>> + case bfd_mach_avrxmega4:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega4");
> >>>>> + case bfd_mach_avrxmega5:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega5");
> >>>>> + case bfd_mach_avrxmega6:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega6");
> >>>>> + case bfd_mach_avrxmega7:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega7");
> >>>>> + default:
> >>>>> + return def_cpu_type;
> >>>>> + }
> >>>>> +}
> >>>>> +
> >>>>> +DEFINE_TYPES(avr_cpu_type_info)
> >>>>>
> >>>>
> >>>> Hi! me again. Following the RC2 discussion. I've being looking in the
> GCC definition of the architecture and as far as I can understand this
> definitions are the generic definitions of the arch families.
> >>>>
> >>>> avr_arch_types[] =
> >>>> {
> >>>> /* unknown device specified */
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
> AVR_MMCU_DEFAULT },
> >>>> /*
> >>>> A M J LM E E E X R T d S FPO S O A
> >>>> S U M PO L L I M A I a t lMff F ff r
> >>>> M L P MV P P J E M N t a a s R s c
> >>>> XW M M M G P Y a r s e e h
> >>>> X P A D t h t t ID */
> >>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1", "avr1"
> },
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2", "avr2"
> },
> >>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25", "avr25"
> },
> >>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3", "avr3"
> },
> >>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31", "avr31"
> },
> >>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35", "avr35"
> },
> >>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4", "avr4"
> },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5", "avr5"
> },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51", "avr51"
> },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6", "avr6"
> },
> >>>>
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100",
> "avrtiny"},
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102",
> "avrxmega2" },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103",
> "avrxmega3" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104",
> "avrxmega4" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105",
> "avrxmega5" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106",
> "avrxmega6" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107",
> "avrxmega7" }
> >>>> };
> >>>>
> >>>> And then you have features for the specific microcontrollers:
> >>>>
> >>>> AVR_ISA_RMW
> >>>> AVR_SHORT_SP
> >>>> AVR_ERRATA_SKIP
> >>>> AVR_ISA_LDS
> >>>> AVR_ISA_RCALL
> >>>>
> >>>> They are mixed in the file 'avr-mcus.def' for family and
> microcontroller definition. Only looking at the family definition:
> >>>>
> >>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
> 0x0060, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x6000, 0)
> >>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
> 0x0060, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
> 0x0100, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
> 0x0100, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
> 0x0200, 0x0, 0x40000, 0)
> >>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x9000, 0)
> >>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
> 0x3f00, 0x0, 0x8000, 0)
> >>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
> 0x2000, 0x0, 0x22000, 0)
> >>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
> 0x0040, 0x0, 0x400, 0)
> >>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
> 0x0060, 0x0, 0x400, 0)
> >>>>
> >>>> I don't really understand how do you get to the proposed family
> definition for qemu. Probably is my fault but if you can help me to
> understand will be grate!
> >>>>
> >>>
> >>> Michal, can you really give us more details on how this mapping is
> done?
> >>>
> >>> I alredy asked a similar question a while ago, and then you said you
> used wikipedia article + avr datasheets. Can you give us more detailed info
> of the whole process of creating ABRFeature list for a particular AVR core
> type, and how that compares with the corresponding content in gcc, as
> Joakin brought to our attention?
> >>>
> >>> Thanks, Aleksandar
> >>>
> >>>
> >>>
> >>>>
> >>>> Regards,
> >>>> --joa
> >>
> >>
> >>
> >> --
> >> Best Regards,
> >> Michael Rolnik
> >
> >
> >
> > --
> > Best Regards,
> > Michael Rolnik
>
--
Best Regards,
Michael Rolnik
[-- Attachment #2: Type: text/html, Size: 52769 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-02-27 8:38 ` Michael Rolnik
@ 2020-03-06 13:34 ` Michael Rolnik
2020-06-16 8:56 ` Philippe Mathieu-Daudé
2020-06-29 9:51 ` Philippe Mathieu-Daudé
0 siblings, 2 replies; 70+ messages in thread
From: Michael Rolnik @ 2020-03-06 13:34 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
[-- Attachment #1: Type: text/plain, Size: 37798 bytes --]
Hi all.
are there any action items for me?
Regards,
Michael Rolnik
On Thu, Feb 27, 2020 at 10:38 AM Michael Rolnik <mrolnik@gmail.com> wrote:
> Hi all.
>
> I don't see how the fact that some MCUs have an instruction and some don't
> within same AVR family.
> Think about gnu binutils (not GCC) these utils have no idea about MCUs all
> they are aware of AVR CPU only.
> However, I don't mind removing -cpu flag.
>
> Regards,
> Michael Ronik
>
> On Fri, Feb 21, 2020 at 5:31 PM Aleksandar Markovic <
> aleksandar.m.mail@gmail.com> wrote:
>
>> On Fri, Feb 21, 2020 at 12:04 PM Michael Rolnik <mrolnik@gmail.com>
>> wrote:
>> >
>> > Hi all.
>> >
>> > How is it going?
>> >
>> > Regards,
>> > Michael.
>> >
>>
>> Michael,
>>
>> I think we are very close to merging.
>>
>> There is absolutely no need to support ALL AVR mcus or AVR core types
>> in the first version that will be merged.
>>
>> But this issue (recently discovered during Jaoquin's review) about the
>> fact that an avr core type doesn't determine in a complete way the
>> instruction set of a particular MCU is thorny.
>>
>> Should we switch from "-cpu <avr core type>" to "-cpu <mcu>" (but keep
>> the current avr core type organization for internal purpose)? Or
>> something else?
>>
>> This is a high-level AVR suppot design issue. Let's think about it
>> without a rush.
>>
>> The problem is that once one organization/meaning of that switch is
>> upstreamed, it is very difficult to switch to other. There is a
>> procedural rule that deprecation process lasts at least 8 months, plus
>> there may be some technical obstacles and difficulties.
>>
>> In short, "-cpu <avr core type>" is not enough to emulate accurately a
>> givem program.
>>
>> Regards,
>> Aleksandar
>>
>> > On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik <mrolnik@gmail.com>
>> wrote:
>> >>
>> >> Hi all.
>> >>
>> >> When I decided to implement AVR 8 bit CPU support for QEMU I found
>> this document which listed all AVR instructions.
>> >> After that I learned that there are several CPU flavours, I looked
>> into this GCC file to figure out what are they as I could not find any
>> official document explaining it.
>> >> Then I downloaded several datasheets and created a list of
>> instructions by CPU type (attached).It turned out that there are some
>> variations
>> >> e.g.
>> >> - AVTTINY - some have LDS, some don't
>> >> - AVR1, AVR25 - some have short SP, some don't
>> >> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 - some have
>> RMW, some don't
>> >> - AVRXMEGA3 - some have RCALL, some don't
>> >>
>> >> I decided to leave CPU flavour definition as suggested by GCC
>> gcc/config/avr/avr-devices.c file and when a specific MCU is created it
>> will set / reset CPU features relevant to it.
>> >>
>> >> I hope this helps.
>> >>
>> >> Best Regards,
>> >> Michael Rolnik
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic <
>> aleksandar.m.mail@gmail.com> wrote:
>> >>>
>> >>>
>> >>>
>> >>> On Sunday, February 2, 2020, Joaquin de Andres <
>> me@xcancerberox.com.ar> wrote:
>> >>>>
>> >>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
>> >>>>>
>> >>>>> From: Michael Rolnik <mrolnik@gmail.com>
>> >>>>>
>> >>>>> AVR core types are:
>> >>>>>
>> >>>>> - avr1
>> >>>>> - avr2
>> >>>>> - avr25
>> >>>>> - avr3
>> >>>>> - avr31
>> >>>>> - avr35
>> >>>>> - avr4
>> >>>>> - avr5
>> >>>>> - avr51
>> >>>>> - avr6
>> >>>>> - avrtiny
>> >>>>> - xmega2
>> >>>>> - xmega3
>> >>>>> - xmega4
>> >>>>> - xmega5
>> >>>>> - xmega6
>> >>>>> - xmega7
>> >>>>>
>> >>>>> Each core type covers multiple AVR MCUs, mentioned in the comments
>> >>>>> before definition of particular AVR core type (part of this patch).
>> >>>>>
>> >>>>> AVR core type defines shared features that are valid for all AVR
>> >>>>> MCUs belonging in that type.
>> >>>>>
>> >>>>> [AM: Split a larger AVR introduction patch into logical units]
>> >>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>> >>>>>
>> >>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
>> >>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>> >>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
>> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
>> >>>>> Acked-by: Igor Mammedov <imammedo@redhat.com>
>> >>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> >>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>> >>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>> >>>>> ---
>> >>>>> target/avr/cpu.c | 601
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >>>>> 1 file changed, 601 insertions(+)
>> >>>>>
>> >>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
>> >>>>> index f41a887..e0ae055 100644
>> >>>>> --- a/target/avr/cpu.c
>> >>>>> +++ b/target/avr/cpu.c
>> >>>>> @@ -215,3 +215,604 @@ static void avr_cpu_class_init(ObjectClass
>> *oc, void *data)
>> >>>>> cc->gdb_num_core_regs = 35;
>> >>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
>> >>>>> }
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr1
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
>> >>>>> + */
>> >>>>> +static void avr_avr1_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr2
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22, attiny26,
>> at90s4414,
>> >>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
>> >>>>> + */
>> >>>>> +static void avr_avr2_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr25
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313,
>> attiny2313a, attiny24,
>> >>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441,
>> attiny84, attiny84a,
>> >>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a, attiny461,
>> attiny461a,
>> >>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48, attiny88,
>> attiny828,
>> >>>>> + * attiny841, at86rf401
>> >>>>> + */
>> >>>>> +static void avr_avr25_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr3
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * at43usb355, at76c711
>> >>>>> + */
>> >>>>> +static void avr_avr3_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr31
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atmega103, at43usb320
>> >>>>> + */
>> >>>>> +static void avr_avr31_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr35
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162, atmega8u2,
>> atmega16u2,
>> >>>>> + * atmega32u2, attiny167, attiny1634
>> >>>>> + */
>> >>>>> +static void avr_avr35_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr4
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8, atmega8a,
>> atmega48, atmega48a,
>> >>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88, atmega88a,
>> atmega88p,
>> >>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535, atmega8hva,
>> at90pwm1,
>> >>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
>> >>>>> + */
>> >>>>> +static void avr_avr4_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr5
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791, ata5795,
>> ata5831, ata6613c,
>> >>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a, atmega161,
>> atmega162,
>> >>>>> + * atmega163, atmega164a, atmega164p, atmega164pa, atmega165,
>> atmega165a,
>> >>>>> + * atmega165p, atmega165pa, atmega168, atmega168a, atmega168p,
>> atmega168pa,
>> >>>>> + * atmega168pb, atmega169, atmega169a, atmega169p, atmega169pa,
>> atmega16hvb,
>> >>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a, atmega32,
>> atmega323,
>> >>>>> + * atmega324a, atmega324p, atmega324pa, atmega325, atmega325a,
>> atmega325p,
>> >>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p,
>> atmega3250pa, atmega328,
>> >>>>> + * atmega328p, atmega328pb, atmega329, atmega329a, atmega329p,
>> atmega329pa,
>> >>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa, atmega32c1,
>> atmega32m1,
>> >>>>> + * atmega32u4, atmega32u6, atmega406, atmega64, atmega64a,
>> atmega640, atmega644,
>> >>>>> + * atmega644a, atmega644p, atmega644pa, atmega645, atmega645a,
>> atmega645p,
>> >>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649, atmega649a,
>> atmega649p,
>> >>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb,
>> atmega6490a, atmega6490p,
>> >>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2, atmega64rfr2,
>> >>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64,
>> at90pwm161, at90pwm216,
>> >>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k, m3000
>> >>>>> + */
>> >>>>> +static void avr_avr5_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr51
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atmega128, atmega128a, atmega1280, atmega1281, atmega1284,
>> atmega1284p,
>> >>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2, at90can128,
>> at90usb1286,
>> >>>>> + * at90usb1287
>> >>>>> + */
>> >>>>> +static void avr_avr51_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avr6
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
>> >>>>> + */
>> >>>>> +static void avr_avr6_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type avrtiny
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
>> >>>>> + */
>> >>>>> +static void avr_avrtiny_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega2
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5, atxmega32a4,
>> atxmega32c3,
>> >>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4,
>> atxmega32a4u,
>> >>>>> + * atxmega32c4, atxmega32e5
>> >>>>> + */
>> >>>>> +static void avr_xmega2_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega3
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416,
>> attiny417, attiny814,
>> >>>>> + * attiny816, attiny817, attiny1614, attiny1616, attiny1617,
>> attiny3214,
>> >>>>> + * attiny3216, attiny3217, atmega808, atmega809, atmega1608,
>> atmega1609,
>> >>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
>> >>>>> + */
>> >>>>> +static void avr_xmega3_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega4
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u,
>> atxmega64b1,
>> >>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
>> >>>>> + */
>> >>>>> +static void avr_xmega4_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega5
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atxmega64a1, atxmega64a1u
>> >>>>> + */
>> >>>>> +static void avr_xmega5_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega6
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3,
>> atxmega256a3,
>> >>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3, atxmega128a3u,
>> atxmega128b1,
>> >>>>> + * atxmega128b3, atxmega128c3, atxmega128d4, atxmega192a3u,
>> atxmega192c3,
>> >>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
>> >>>>> + */
>> >>>>> +static void avr_xmega6_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +/*
>> >>>>> + * Setting features of AVR core type xmega7
>> >>>>> + * --------------------------------------
>> >>>>> + *
>> >>>>> + * This type of AVR core is present in the following AVR MCUs:
>> >>>>> + *
>> >>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
>> >>>>> + */
>> >>>>> +static void avr_xmega7_initfn(Object *obj)
>> >>>>> +{
>> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
>> >>>>> + CPUAVRState *env = &cpu->env;
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
>> >>>>> +
>> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
>> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
>> >>>>> +}
>> >>>>> +
>> >>>>> +typedef struct AVRCPUInfo {
>> >>>>> + const char *name;
>> >>>>> + void (*initfn)(Object *obj);
>> >>>>> +} AVRCPUInfo;
>> >>>>> +
>> >>>>> +
>> >>>>> +static void avr_cpu_list_entry(gpointer data, gpointer user_data)
>> >>>>> +{
>> >>>>> + const char *typename =
>> object_class_get_name(OBJECT_CLASS(data));
>> >>>>> +
>> >>>>> + qemu_printf("%s\n", typename);
>> >>>>> +}
>> >>>>> +
>> >>>>> +void avr_cpu_list(void)
>> >>>>> +{
>> >>>>> + GSList *list;
>> >>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
>> >>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
>> >>>>> + g_slist_free(list);
>> >>>>> +}
>> >>>>> +
>> >>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
>> >>>>> + { \
>> >>>>> + .parent = TYPE_AVR_CPU, \
>> >>>>> + .instance_init = initfn, \
>> >>>>> + .name = AVR_CPU_TYPE_NAME(model), \
>> >>>>> + }
>> >>>>> +
>> >>>>> +static const TypeInfo avr_cpu_type_info[] = {
>> >>>>> + {
>> >>>>> + .name = TYPE_AVR_CPU,
>> >>>>> + .parent = TYPE_CPU,
>> >>>>> + .instance_size = sizeof(AVRCPU),
>> >>>>> + .instance_init = avr_cpu_initfn,
>> >>>>> + .class_size = sizeof(AVRCPUClass),
>> >>>>> + .class_init = avr_cpu_class_init,
>> >>>>> + .abstract = true,
>> >>>>> + },
>> >>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
>> >>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
>> >>>>> +};
>> >>>>> +
>> >>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const char
>> *def_cpu_type)
>> >>>>> +{
>> >>>>> + switch (flags & EF_AVR_MACH) {
>> >>>>> + case bfd_mach_avr1:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr1");
>> >>>>> + case bfd_mach_avr2:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr2");
>> >>>>> + case bfd_mach_avr25:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr25");
>> >>>>> + case bfd_mach_avr3:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr3");
>> >>>>> + case bfd_mach_avr31:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr31");
>> >>>>> + case bfd_mach_avr35:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr35");
>> >>>>> + case bfd_mach_avr4:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr4");
>> >>>>> + case bfd_mach_avr5:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr5");
>> >>>>> + case bfd_mach_avr51:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr51");
>> >>>>> + case bfd_mach_avr6:
>> >>>>> + return AVR_CPU_TYPE_NAME("avr6");
>> >>>>> + case bfd_mach_avrtiny:
>> >>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
>> >>>>> + case bfd_mach_avrxmega2:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega2");
>> >>>>> + case bfd_mach_avrxmega3:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega3");
>> >>>>> + case bfd_mach_avrxmega4:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega4");
>> >>>>> + case bfd_mach_avrxmega5:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega5");
>> >>>>> + case bfd_mach_avrxmega6:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega6");
>> >>>>> + case bfd_mach_avrxmega7:
>> >>>>> + return AVR_CPU_TYPE_NAME("xmega7");
>> >>>>> + default:
>> >>>>> + return def_cpu_type;
>> >>>>> + }
>> >>>>> +}
>> >>>>> +
>> >>>>> +DEFINE_TYPES(avr_cpu_type_info)
>> >>>>>
>> >>>>
>> >>>> Hi! me again. Following the RC2 discussion. I've being looking in
>> the GCC definition of the architecture and as far as I can understand this
>> definitions are the generic definitions of the arch families.
>> >>>>
>> >>>> avr_arch_types[] =
>> >>>> {
>> >>>> /* unknown device specified */
>> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, NULL,
>> AVR_MMCU_DEFAULT },
>> >>>> /*
>> >>>> A M J LM E E E X R T d S FPO S O A
>> >>>> S U M PO L L I M A I a t lMff F ff r
>> >>>> M L P MV P P J E M N t a a s R s c
>> >>>> XW M M M G P Y a r s e e h
>> >>>> X P A D t h t t ID */
>> >>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "1",
>> "avr1" },
>> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "2",
>> "avr2" },
>> >>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "25",
>> "avr25" },
>> >>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "3",
>> "avr3" },
>> >>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32, "31",
>> "avr31" },
>> >>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "35",
>> "avr35" },
>> >>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "4",
>> "avr4" },
>> >>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32, "5",
>> "avr5" },
>> >>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32, "51",
>> "avr51" },
>> >>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32, "6",
>> "avr6" },
>> >>>>
>> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0, "100",
>> "avrtiny"},
>> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0, "102",
>> "avrxmega2" },
>> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0, "103",
>> "avrxmega3" },
>> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0, "104",
>> "avrxmega4" },
>> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0, "105",
>> "avrxmega5" },
>> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0, "106",
>> "avrxmega6" },
>> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0, "107",
>> "avrxmega7" }
>> >>>> };
>> >>>>
>> >>>> And then you have features for the specific microcontrollers:
>> >>>>
>> >>>> AVR_ISA_RMW
>> >>>> AVR_SHORT_SP
>> >>>> AVR_ERRATA_SKIP
>> >>>> AVR_ISA_LDS
>> >>>> AVR_ISA_RCALL
>> >>>>
>> >>>> They are mixed in the file 'avr-mcus.def' for family and
>> microcontroller definition. Only looking at the family definition:
>> >>>>
>> >>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP, NULL,
>> 0x0060, 0x0, 0x60000, 0)
>> >>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x2000, 0)
>> >>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x6000, 0)
>> >>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP, NULL,
>> 0x0060, 0x0, 0x20000, 0)
>> >>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE, NULL,
>> 0x0100, 0x0, 0x4000, 0)
>> >>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x2000, 0)
>> >>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x4000, 0)
>> >>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE, NULL,
>> 0x0100, 0x0, 0x20000, 0)
>> >>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE, NULL,
>> 0x0200, 0x0, 0x40000, 0)
>> >>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x9000, 0)
>> >>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3, AVR_ISA_NONE, NULL,
>> 0x3f00, 0x0, 0x8000, 0)
>> >>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x11000, 0)
>> >>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x11000, 0)
>> >>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x60000, 0)
>> >>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE, NULL,
>> 0x2000, 0x0, 0x22000, 0)
>> >>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE, NULL,
>> 0x0040, 0x0, 0x400, 0)
>> >>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE, NULL,
>> 0x0060, 0x0, 0x400, 0)
>> >>>>
>> >>>> I don't really understand how do you get to the proposed family
>> definition for qemu. Probably is my fault but if you can help me to
>> understand will be grate!
>> >>>>
>> >>>
>> >>> Michal, can you really give us more details on how this mapping is
>> done?
>> >>>
>> >>> I alredy asked a similar question a while ago, and then you said you
>> used wikipedia article + avr datasheets. Can you give us more detailed info
>> of the whole process of creating ABRFeature list for a particular AVR core
>> type, and how that compares with the corresponding content in gcc, as
>> Joakin brought to our attention?
>> >>>
>> >>> Thanks, Aleksandar
>> >>>
>> >>>
>> >>>
>> >>>>
>> >>>> Regards,
>> >>>> --joa
>> >>
>> >>
>> >>
>> >> --
>> >> Best Regards,
>> >> Michael Rolnik
>> >
>> >
>> >
>> > --
>> > Best Regards,
>> > Michael Rolnik
>>
>
>
> --
> Best Regards,
> Michael Rolnik
>
--
Best Regards,
Michael Rolnik
[-- Attachment #2: Type: text/html, Size: 53356 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-03-06 13:34 ` Michael Rolnik
@ 2020-06-16 8:56 ` Philippe Mathieu-Daudé
2020-06-29 9:51 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-16 8:56 UTC (permalink / raw)
To: Michael Rolnik, Aleksandar Markovic
Cc: Aleksandar Markovic, Joaquin de Andres, Richard Henderson,
qemu-devel, Sarah Harris
Hi Michael,
On 3/6/20 2:34 PM, Michael Rolnik wrote:
> Hi all.
>
> are there any action items for me?
I am not sure neither of the status of this. See below.
>
> Regards,
> Michael Rolnik
>
> On Thu, Feb 27, 2020 at 10:38 AM Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>> wrote:
>
> Hi all.
>
> I don't see how the fact that some MCUs have an instruction and some
> don't within same AVR family.
> Think about gnu binutils (not GCC) these utils have no idea about
> MCUs all they are aware of AVR CPU only.
> However, I don't mind removing -cpu flag.
>
> Regards,
> Michael Ronik
>
> On Fri, Feb 21, 2020 at 5:31 PM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> wrote:
>
> On Fri, Feb 21, 2020 at 12:04 PM Michael Rolnik
> <mrolnik@gmail.com <mailto:mrolnik@gmail.com>> wrote:
> >
> > Hi all.
> >
> > How is it going?
> >
> > Regards,
> > Michael.
> >
>
> Michael,
>
> I think we are very close to merging.
>
> There is absolutely no need to support ALL AVR mcus or AVR core
> types
> in the first version that will be merged.
>
> But this issue (recently discovered during Jaoquin's review)
> about the
> fact that an avr core type doesn't determine in a complete way the
> instruction set of a particular MCU is thorny.
I addressed Joaquin comments in the fork we use
with the following commit:
https://gitlab.com/philmd/qemu/-/commit/c6b227f1a0b2a3
But this was more than 3 months ago, so I don't remember much.
Anyway this thread is in the rc4, rc5 is on the list, you should
ping the rc5 thread instead.
>
> Should we switch from "-cpu <avr core type>" to "-cpu <mcu>"
> (but keep
> the current avr core type organization for internal purpose)? Or
> something else?
>
> This is a high-level AVR suppot design issue. Let's think about it
> without a rush.
>
> The problem is that once one organization/meaning of that switch is
> upstreamed, it is very difficult to switch to other. There is a
> procedural rule that deprecation process lasts at least 8
> months, plus
> there may be some technical obstacles and difficulties.
>
> In short, "-cpu <avr core type>" is not enough to emulate
> accurately a
> givem program.
>
> Regards,
> Aleksandar
>
> > On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik
> <mrolnik@gmail.com <mailto:mrolnik@gmail.com>> wrote:
> >>
> >> Hi all.
> >>
> >> When I decided to implement AVR 8 bit CPU support for QEMU I
> found this document which listed all AVR instructions.
> >> After that I learned that there are several CPU flavours, I
> looked into this GCC file to figure out what are they as I could
> not find any official document explaining it.
> >> Then I downloaded several datasheets and created a list of
> instructions by CPU type (attached).It turned out that there are
> some variations
> >> e.g.
> >> - AVTTINY - some have LDS, some don't
> >> - AVR1, AVR25 - some have short SP, some don't
> >> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 -
> some have RMW, some don't
> >> - AVRXMEGA3 - some have RCALL, some don't
> >>
> >> I decided to leave CPU flavour definition as suggested by GCC
> gcc/config/avr/avr-devices.c file and when a specific MCU is
> created it will set / reset CPU features relevant to it.
> >>
> >> I hope this helps.
> >>
> >> Best Regards,
> >> Michael Rolnik
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com
> <mailto:aleksandar.m.mail@gmail.com>> wrote:
> >>>
> >>>
> >>>
> >>> On Sunday, February 2, 2020, Joaquin de Andres
> <me@xcancerberox.com.ar <mailto:me@xcancerberox.com.ar>> wrote:
> >>>>
> >>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
> >>>>>
> >>>>> From: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>>
> >>>>> AVR core types are:
> >>>>>
> >>>>> - avr1
> >>>>> - avr2
> >>>>> - avr25
> >>>>> - avr3
> >>>>> - avr31
> >>>>> - avr35
> >>>>> - avr4
> >>>>> - avr5
> >>>>> - avr51
> >>>>> - avr6
> >>>>> - avrtiny
> >>>>> - xmega2
> >>>>> - xmega3
> >>>>> - xmega4
> >>>>> - xmega5
> >>>>> - xmega6
> >>>>> - xmega7
> >>>>>
> >>>>> Each core type covers multiple AVR MCUs, mentioned in the
> comments
> >>>>> before definition of particular AVR core type (part of
> this patch).
> >>>>>
> >>>>> AVR core type defines shared features that are valid for
> all AVR
> >>>>> MCUs belonging in that type.
> >>>>>
> >>>>> [AM: Split a larger AVR introduction patch into logical units]
> >>>>> Suggested-by: Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> >>>>>
> >>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk
> <mailto:S.E.Harris@kent.ac.uk>>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk
> <mailto:S.E.Harris@kent.ac.uk>>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Acked-by: Igor Mammedov <imammedo@redhat.com
> <mailto:imammedo@redhat.com>>
> >>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com
> <mailto:philmd@redhat.com>>
> >>>>> Signed-off-by: Richard Henderson
> <richard.henderson@linaro.org <mailto:richard.henderson@linaro.org>>
> >>>>> Signed-off-by: Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> >>>>> ---
> >>>>> target/avr/cpu.c | 601
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>> 1 file changed, 601 insertions(+)
> >>>>>
> >>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
> >>>>> index f41a887..e0ae055 100644
> >>>>> --- a/target/avr/cpu.c
> >>>>> +++ b/target/avr/cpu.c
> >>>>> @@ -215,3 +215,604 @@ static void
> avr_cpu_class_init(ObjectClass *oc, void *data)
> >>>>> cc->gdb_num_core_regs = 35;
> >>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
> >>>>> }
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr1
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
> >>>>> + */
> >>>>> +static void avr_avr1_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22,
> attiny26, at90s4414,
> >>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
> >>>>> + */
> >>>>> +static void avr_avr2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr25
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313,
> attiny2313a, attiny24,
> >>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441,
> attiny84, attiny84a,
> >>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a,
> attiny461, attiny461a,
> >>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48,
> attiny88, attiny828,
> >>>>> + * attiny841, at86rf401
> >>>>> + */
> >>>>> +static void avr_avr25_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at43usb355, at76c711
> >>>>> + */
> >>>>> +static void avr_avr3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr31
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega103, at43usb320
> >>>>> + */
> >>>>> +static void avr_avr31_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr35
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162,
> atmega8u2, atmega16u2,
> >>>>> + * atmega32u2, attiny167, attiny1634
> >>>>> + */
> >>>>> +static void avr_avr35_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8,
> atmega8a, atmega48, atmega48a,
> >>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88,
> atmega88a, atmega88p,
> >>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535,
> atmega8hva, at90pwm1,
> >>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
> >>>>> + */
> >>>>> +static void avr_avr4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791,
> ata5795, ata5831, ata6613c,
> >>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a,
> atmega161, atmega162,
> >>>>> + * atmega163, atmega164a, atmega164p, atmega164pa,
> atmega165, atmega165a,
> >>>>> + * atmega165p, atmega165pa, atmega168, atmega168a,
> atmega168p, atmega168pa,
> >>>>> + * atmega168pb, atmega169, atmega169a, atmega169p,
> atmega169pa, atmega16hvb,
> >>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a,
> atmega32, atmega323,
> >>>>> + * atmega324a, atmega324p, atmega324pa, atmega325,
> atmega325a, atmega325p,
> >>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p,
> atmega3250pa, atmega328,
> >>>>> + * atmega328p, atmega328pb, atmega329, atmega329a,
> atmega329p, atmega329pa,
> >>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa,
> atmega32c1, atmega32m1,
> >>>>> + * atmega32u4, atmega32u6, atmega406, atmega64,
> atmega64a, atmega640, atmega644,
> >>>>> + * atmega644a, atmega644p, atmega644pa, atmega645,
> atmega645a, atmega645p,
> >>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649,
> atmega649a, atmega649p,
> >>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb,
> atmega6490a, atmega6490p,
> >>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2,
> atmega64rfr2,
> >>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64,
> at90pwm161, at90pwm216,
> >>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k,
> m3000
> >>>>> + */
> >>>>> +static void avr_avr5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr51
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega128, atmega128a, atmega1280, atmega1281,
> atmega1284, atmega1284p,
> >>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2,
> at90can128, at90usb1286,
> >>>>> + * at90usb1287
> >>>>> + */
> >>>>> +static void avr_avr51_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
> >>>>> + */
> >>>>> +static void avr_avr6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avrtiny
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
> >>>>> + */
> >>>>> +static void avr_avrtiny_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5,
> atxmega32a4, atxmega32c3,
> >>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4,
> atxmega32a4u,
> >>>>> + * atxmega32c4, atxmega32e5
> >>>>> + */
> >>>>> +static void avr_xmega2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416,
> attiny417, attiny814,
> >>>>> + * attiny816, attiny817, attiny1614, attiny1616,
> attiny1617, attiny3214,
> >>>>> + * attiny3216, attiny3217, atmega808, atmega809,
> atmega1608, atmega1609,
> >>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
> >>>>> + */
> >>>>> +static void avr_xmega3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u,
> atxmega64b1,
> >>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
> >>>>> + */
> >>>>> +static void avr_xmega4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega64a1, atxmega64a1u
> >>>>> + */
> >>>>> +static void avr_xmega5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega128a3, atxmega128d3, atxmega192a3,
> atxmega192d3, atxmega256a3,
> >>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3,
> atxmega128a3u, atxmega128b1,
> >>>>> + * atxmega128b3, atxmega128c3, atxmega128d4,
> atxmega192a3u, atxmega192c3,
> >>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
> >>>>> + */
> >>>>> +static void avr_xmega6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega7
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
> >>>>> + */
> >>>>> +static void avr_xmega7_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +typedef struct AVRCPUInfo {
> >>>>> + const char *name;
> >>>>> + void (*initfn)(Object *obj);
> >>>>> +} AVRCPUInfo;
> >>>>> +
> >>>>> +
> >>>>> +static void avr_cpu_list_entry(gpointer data, gpointer
> user_data)
> >>>>> +{
> >>>>> + const char *typename =
> object_class_get_name(OBJECT_CLASS(data));
> >>>>> +
> >>>>> + qemu_printf("%s\n", typename);
> >>>>> +}
> >>>>> +
> >>>>> +void avr_cpu_list(void)
> >>>>> +{
> >>>>> + GSList *list;
> >>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
> >>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
> >>>>> + g_slist_free(list);
> >>>>> +}
> >>>>> +
> >>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
> >>>>> + { \
> >>>>> + .parent = TYPE_AVR_CPU, \
> >>>>> + .instance_init = initfn, \
> >>>>> + .name = AVR_CPU_TYPE_NAME(model), \
> >>>>> + }
> >>>>> +
> >>>>> +static const TypeInfo avr_cpu_type_info[] = {
> >>>>> + {
> >>>>> + .name = TYPE_AVR_CPU,
> >>>>> + .parent = TYPE_CPU,
> >>>>> + .instance_size = sizeof(AVRCPU),
> >>>>> + .instance_init = avr_cpu_initfn,
> >>>>> + .class_size = sizeof(AVRCPUClass),
> >>>>> + .class_init = avr_cpu_class_init,
> >>>>> + .abstract = true,
> >>>>> + },
> >>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
> >>>>> +};
> >>>>> +
> >>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const
> char *def_cpu_type)
> >>>>> +{
> >>>>> + switch (flags & EF_AVR_MACH) {
> >>>>> + case bfd_mach_avr1:
> >>>>> + return AVR_CPU_TYPE_NAME("avr1");
> >>>>> + case bfd_mach_avr2:
> >>>>> + return AVR_CPU_TYPE_NAME("avr2");
> >>>>> + case bfd_mach_avr25:
> >>>>> + return AVR_CPU_TYPE_NAME("avr25");
> >>>>> + case bfd_mach_avr3:
> >>>>> + return AVR_CPU_TYPE_NAME("avr3");
> >>>>> + case bfd_mach_avr31:
> >>>>> + return AVR_CPU_TYPE_NAME("avr31");
> >>>>> + case bfd_mach_avr35:
> >>>>> + return AVR_CPU_TYPE_NAME("avr35");
> >>>>> + case bfd_mach_avr4:
> >>>>> + return AVR_CPU_TYPE_NAME("avr4");
> >>>>> + case bfd_mach_avr5:
> >>>>> + return AVR_CPU_TYPE_NAME("avr5");
> >>>>> + case bfd_mach_avr51:
> >>>>> + return AVR_CPU_TYPE_NAME("avr51");
> >>>>> + case bfd_mach_avr6:
> >>>>> + return AVR_CPU_TYPE_NAME("avr6");
> >>>>> + case bfd_mach_avrtiny:
> >>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
> >>>>> + case bfd_mach_avrxmega2:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega2");
> >>>>> + case bfd_mach_avrxmega3:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega3");
> >>>>> + case bfd_mach_avrxmega4:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega4");
> >>>>> + case bfd_mach_avrxmega5:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega5");
> >>>>> + case bfd_mach_avrxmega6:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega6");
> >>>>> + case bfd_mach_avrxmega7:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega7");
> >>>>> + default:
> >>>>> + return def_cpu_type;
> >>>>> + }
> >>>>> +}
> >>>>> +
> >>>>> +DEFINE_TYPES(avr_cpu_type_info)
> >>>>>
> >>>>
> >>>> Hi! me again. Following the RC2 discussion. I've being
> looking in the GCC definition of the architecture and as far as
> I can understand this definitions are the generic definitions of
> the arch families.
> >>>>
> >>>> avr_arch_types[] =
> >>>> {
> >>>> /* unknown device specified */
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> NULL, AVR_MMCU_DEFAULT },
> >>>> /*
> >>>> A M J LM E E E X R T d S FPO S O A
> >>>> S U M PO L L I M A I a t lMff F ff r
> >>>> M L P MV P P J E M N t a a s R s c
> >>>> XW M M M G P Y a r s e e h
> >>>> X P A D t h t t
> ID */
> >>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "1", "avr1" },
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "2", "avr2" },
> >>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "25", "avr25" },
> >>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "3", "avr3" },
> >>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "31", "avr31" },
> >>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "35", "avr35" },
> >>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "4", "avr4" },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "5", "avr5" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32,
> "51", "avr51" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32,
> "6", "avr6" },
> >>>>
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0,
> "100", "avrtiny"},
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0,
> "102", "avrxmega2" },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0,
> "103", "avrxmega3" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0,
> "104", "avrxmega4" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0,
> "105", "avrxmega5" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0,
> "106", "avrxmega6" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0,
> "107", "avrxmega7" }
> >>>> };
> >>>>
> >>>> And then you have features for the specific microcontrollers:
> >>>>
> >>>> AVR_ISA_RMW
> >>>> AVR_SHORT_SP
> >>>> AVR_ERRATA_SKIP
> >>>> AVR_ISA_LDS
> >>>> AVR_ISA_RCALL
> >>>>
> >>>> They are mixed in the file 'avr-mcus.def' for family and
> microcontroller definition. Only looking at the family definition:
> >>>>
> >>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP,
> NULL, 0x0060, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x6000, 0)
> >>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP,
> NULL, 0x0060, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE,
> NULL, 0x0100, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE,
> NULL, 0x0100, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE,
> NULL, 0x0200, 0x0, 0x40000, 0)
> >>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x9000, 0)
> >>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3,
> AVR_ISA_NONE, NULL, 0x3f00, 0x0, 0x8000, 0)
> >>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x22000, 0)
> >>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE,
> NULL, 0x0040, 0x0, 0x400, 0)
> >>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x400, 0)
> >>>>
> >>>> I don't really understand how do you get to the proposed
> family definition for qemu. Probably is my fault but if you can
> help me to understand will be grate!
> >>>>
> >>>
> >>> Michal, can you really give us more details on how this
> mapping is done?
> >>>
> >>> I alredy asked a similar question a while ago, and then you
> said you used wikipedia article + avr datasheets. Can you give
> us more detailed info of the whole process of creating
> ABRFeature list for a particular AVR core type, and how that
> compares with the corresponding content in gcc, as Joakin
> brought to our attention?
> >>>
> >>> Thanks, Aleksandar
> >>>
> >>>
> >>>
> >>>>
> >>>> Regards,
> >>>> --joa
> >>
> >>
> >>
> >> --
> >> Best Regards,
> >> Michael Rolnik
> >
> >
> >
> > --
> > Best Regards,
> > Michael Rolnik
>
>
>
> --
> Best Regards,
> Michael Rolnik
>
>
>
> --
> Best Regards,
> Michael Rolnik
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 06/29] target/avr: Add defintions of AVR core types
2020-03-06 13:34 ` Michael Rolnik
2020-06-16 8:56 ` Philippe Mathieu-Daudé
@ 2020-06-29 9:51 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 9:51 UTC (permalink / raw)
To: Michael Rolnik
Cc: Sarah Harris, Joaquin de Andres, Richard Henderson, qemu-devel,
Aleksandar Markovic, Aleksandar Markovic
Hi Michael,
On 3/6/20 2:34 PM, Michael Rolnik wrote:
> Hi all.
>
> are there any action items for me?
FYI QEMU 5.1 soft freeze is next Tuesday, so even if Aleksandar
respin this week, it is very unlikely Richard and myself have
time to review it again before next week.
TBH let face it, AVR won't be in the next release.
When QEMU 5.2 development windows opens, you should start pinging
early and insist every week.
I'm sorry you have been waiting so long without any updates. If
that can comfort you a bit, you are not the only one waiting for
this to be merged. Now if the AVR users were more active in the
QEMU community (simply by showing their presence, sharing how they
would use it) this would raise the interest in this port.
Regards,
Phil.
>
> Regards,
> Michael Rolnik
>
> On Thu, Feb 27, 2020 at 10:38 AM Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>> wrote:
>
> Hi all.
>
> I don't see how the fact that some MCUs have an instruction and some
> don't within same AVR family.
> Think about gnu binutils (not GCC) these utils have no idea about
> MCUs all they are aware of AVR CPU only.
> However, I don't mind removing -cpu flag.
>
> Regards,
> Michael Ronik
>
> On Fri, Feb 21, 2020 at 5:31 PM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> wrote:
>
> On Fri, Feb 21, 2020 at 12:04 PM Michael Rolnik
> <mrolnik@gmail.com <mailto:mrolnik@gmail.com>> wrote:
> >
> > Hi all.
> >
> > How is it going?
> >
> > Regards,
> > Michael.
> >
>
> Michael,
>
> I think we are very close to merging.
>
> There is absolutely no need to support ALL AVR mcus or AVR core
> types
> in the first version that will be merged.
>
> But this issue (recently discovered during Jaoquin's review)
> about the
> fact that an avr core type doesn't determine in a complete way the
> instruction set of a particular MCU is thorny.
>
> Should we switch from "-cpu <avr core type>" to "-cpu <mcu>"
> (but keep
> the current avr core type organization for internal purpose)? Or
> something else?
>
> This is a high-level AVR suppot design issue. Let's think about it
> without a rush.
>
> The problem is that once one organization/meaning of that switch is
> upstreamed, it is very difficult to switch to other. There is a
> procedural rule that deprecation process lasts at least 8
> months, plus
> there may be some technical obstacles and difficulties.
>
> In short, "-cpu <avr core type>" is not enough to emulate
> accurately a
> givem program.
>
> Regards,
> Aleksandar
>
> > On Mon, Feb 10, 2020 at 9:39 AM Michael Rolnik
> <mrolnik@gmail.com <mailto:mrolnik@gmail.com>> wrote:
> >>
> >> Hi all.
> >>
> >> When I decided to implement AVR 8 bit CPU support for QEMU I
> found this document which listed all AVR instructions.
> >> After that I learned that there are several CPU flavours, I
> looked into this GCC file to figure out what are they as I could
> not find any official document explaining it.
> >> Then I downloaded several datasheets and created a list of
> instructions by CPU type (attached).It turned out that there are
> some variations
> >> e.g.
> >> - AVTTINY - some have LDS, some don't
> >> - AVR1, AVR25 - some have short SP, some don't
> >> - AVRXMEGA2, AVRXMEGA4, AVRXMEGA5, AVRXMEGA6, AVRXMEGA7 -
> some have RMW, some don't
> >> - AVRXMEGA3 - some have RCALL, some don't
> >>
> >> I decided to leave CPU flavour definition as suggested by GCC
> gcc/config/avr/avr-devices.c file and when a specific MCU is
> created it will set / reset CPU features relevant to it.
> >>
> >> I hope this helps.
> >>
> >> Best Regards,
> >> Michael Rolnik
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Sat, Feb 8, 2020 at 9:35 AM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com
> <mailto:aleksandar.m.mail@gmail.com>> wrote:
> >>>
> >>>
> >>>
> >>> On Sunday, February 2, 2020, Joaquin de Andres
> <me@xcancerberox.com.ar <mailto:me@xcancerberox.com.ar>> wrote:
> >>>>
> >>>> On 1/31/20 1:02 AM, Aleksandar Markovic wrote:
> >>>>>
> >>>>> From: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>>
> >>>>> AVR core types are:
> >>>>>
> >>>>> - avr1
> >>>>> - avr2
> >>>>> - avr25
> >>>>> - avr3
> >>>>> - avr31
> >>>>> - avr35
> >>>>> - avr4
> >>>>> - avr5
> >>>>> - avr51
> >>>>> - avr6
> >>>>> - avrtiny
> >>>>> - xmega2
> >>>>> - xmega3
> >>>>> - xmega4
> >>>>> - xmega5
> >>>>> - xmega6
> >>>>> - xmega7
> >>>>>
> >>>>> Each core type covers multiple AVR MCUs, mentioned in the
> comments
> >>>>> before definition of particular AVR core type (part of
> this patch).
> >>>>>
> >>>>> AVR core type defines shared features that are valid for
> all AVR
> >>>>> MCUs belonging in that type.
> >>>>>
> >>>>> [AM: Split a larger AVR introduction patch into logical units]
> >>>>> Suggested-by: Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> >>>>>
> >>>>> Co-developed-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk
> <mailto:S.E.Harris@kent.ac.uk>>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk
> <mailto:S.E.Harris@kent.ac.uk>>
> >>>>> Signed-off-by: Michael Rolnik <mrolnik@gmail.com
> <mailto:mrolnik@gmail.com>>
> >>>>> Acked-by: Igor Mammedov <imammedo@redhat.com
> <mailto:imammedo@redhat.com>>
> >>>>> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com
> <mailto:philmd@redhat.com>>
> >>>>> Signed-off-by: Richard Henderson
> <richard.henderson@linaro.org <mailto:richard.henderson@linaro.org>>
> >>>>> Signed-off-by: Aleksandar Markovic
> <aleksandar.m.mail@gmail.com <mailto:aleksandar.m.mail@gmail.com>>
> >>>>> ---
> >>>>> target/avr/cpu.c | 601
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>> 1 file changed, 601 insertions(+)
> >>>>>
> >>>>> diff --git a/target/avr/cpu.c b/target/avr/cpu.c
> >>>>> index f41a887..e0ae055 100644
> >>>>> --- a/target/avr/cpu.c
> >>>>> +++ b/target/avr/cpu.c
> >>>>> @@ -215,3 +215,604 @@ static void
> avr_cpu_class_init(ObjectClass *oc, void *data)
> >>>>> cc->gdb_num_core_regs = 35;
> >>>>> cc->gdb_core_xml_file = "avr-cpu.xml";
> >>>>> }
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr1
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at90s1200, attiny11, attiny12, attiny15, attiny28
> >>>>> + */
> >>>>> +static void avr_avr1_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at90s2313, at90s2323, at90s2333, at90s2343, attiny22,
> attiny26, at90s4414,
> >>>>> + * at90s4433, at90s4434, at90s8515, at90c8534, at90s8535
> >>>>> + */
> >>>>> +static void avr_avr2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr25
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5272, ata6616c, attiny13, attiny13a, attiny2313,
> attiny2313a, attiny24,
> >>>>> + * attiny24a, attiny4313, attiny44, attiny44a, attiny441,
> attiny84, attiny84a,
> >>>>> + * attiny25, attiny45, attiny85, attiny261, attiny261a,
> attiny461, attiny461a,
> >>>>> + * attiny861, attiny861a, attiny43u, attiny87, attiny48,
> attiny88, attiny828,
> >>>>> + * attiny841, at86rf401
> >>>>> + */
> >>>>> +static void avr_avr25_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * at43usb355, at76c711
> >>>>> + */
> >>>>> +static void avr_avr3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr31
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega103, at43usb320
> >>>>> + */
> >>>>> +static void avr_avr31_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr35
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5505, ata6617c, ata664251, at90usb82, at90usb162,
> atmega8u2, atmega16u2,
> >>>>> + * atmega32u2, attiny167, attiny1634
> >>>>> + */
> >>>>> +static void avr_avr35_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata6285, ata6286, ata6289, ata6612c, atmega8,
> atmega8a, atmega48, atmega48a,
> >>>>> + * atmega48p, atmega48pa, atmega48pb, atmega88,
> atmega88a, atmega88p,
> >>>>> + * atmega88pa, atmega88pb, atmega8515, atmega8535,
> atmega8hva, at90pwm1,
> >>>>> + * at90pwm2, at90pwm2b, at90pwm3, at90pwm3b, at90pwm81
> >>>>> + */
> >>>>> +static void avr_avr4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * ata5702m322, ata5782, ata5790, ata5790n, ata5791,
> ata5795, ata5831, ata6613c,
> >>>>> + * ata6614q, ata8210, ata8510, atmega16, atmega16a,
> atmega161, atmega162,
> >>>>> + * atmega163, atmega164a, atmega164p, atmega164pa,
> atmega165, atmega165a,
> >>>>> + * atmega165p, atmega165pa, atmega168, atmega168a,
> atmega168p, atmega168pa,
> >>>>> + * atmega168pb, atmega169, atmega169a, atmega169p,
> atmega169pa, atmega16hvb,
> >>>>> + * atmega16hvbrevb, atmega16m1, atmega16u4, atmega32a,
> atmega32, atmega323,
> >>>>> + * atmega324a, atmega324p, atmega324pa, atmega325,
> atmega325a, atmega325p,
> >>>>> + * atmega325pa, atmega3250, atmega3250a, atmega3250p,
> atmega3250pa, atmega328,
> >>>>> + * atmega328p, atmega328pb, atmega329, atmega329a,
> atmega329p, atmega329pa,
> >>>>> + * atmega3290, atmega3290a, atmega3290p, atmega3290pa,
> atmega32c1, atmega32m1,
> >>>>> + * atmega32u4, atmega32u6, atmega406, atmega64,
> atmega64a, atmega640, atmega644,
> >>>>> + * atmega644a, atmega644p, atmega644pa, atmega645,
> atmega645a, atmega645p,
> >>>>> + * atmega6450, atmega6450a, atmega6450p, atmega649,
> atmega649a, atmega649p,
> >>>>> + * atmega6490, atmega16hva, atmega16hva2, atmega32hvb,
> atmega6490a, atmega6490p,
> >>>>> + * atmega64c1, atmega64m1, atmega64hve, atmega64hve2,
> atmega64rfr2,
> >>>>> + * atmega644rfr2, atmega32hvbrevb, at90can32, at90can64,
> at90pwm161, at90pwm216,
> >>>>> + * at90pwm316, at90scr100, at90usb646, at90usb647, at94k,
> m3000
> >>>>> + */
> >>>>> +static void avr_avr5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr51
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega128, atmega128a, atmega1280, atmega1281,
> atmega1284, atmega1284p,
> >>>>> + * atmega128rfa1, atmega128rfr2, atmega1284rfr2,
> at90can128, at90usb1286,
> >>>>> + * at90usb1287
> >>>>> + */
> >>>>> +static void avr_avr51_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avr6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atmega2560, atmega2561, atmega256rfr2, atmega2564rfr2
> >>>>> + */
> >>>>> +static void avr_avr6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type avrtiny
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * attiny4, attiny5, attiny9, attiny10, attiny20, attiny40
> >>>>> + */
> >>>>> +static void avr_avrtiny_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_1_BYTE_SP);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega2
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega8e5, atxmega16a4, atxmega16d4, atxmega16e5,
> atxmega32a4, atxmega32c3,
> >>>>> + * atxmega32d3, atxmega32d4, atxmega16a4u, atxmega16c4,
> atxmega32a4u,
> >>>>> + * atxmega32c4, atxmega32e5
> >>>>> + */
> >>>>> +static void avr_xmega2_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega3
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * attiny212, attiny214, attiny412, attiny414, attiny416,
> attiny417, attiny814,
> >>>>> + * attiny816, attiny817, attiny1614, attiny1616,
> attiny1617, attiny3214,
> >>>>> + * attiny3216, attiny3217, atmega808, atmega809,
> atmega1608, atmega1609,
> >>>>> + * atmega3208, atmega3209, atmega4808, atmega4809
> >>>>> + */
> >>>>> +static void avr_xmega3_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega4
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega64a3, atxmega64d3, atxmega64a3u, atxmega64a4u,
> atxmega64b1,
> >>>>> + * atxmega64b3, atxmega64c3, atxmega64d4
> >>>>> + */
> >>>>> +static void avr_xmega4_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega5
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega64a1, atxmega64a1u
> >>>>> + */
> >>>>> +static void avr_xmega5_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega6
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega128a3, atxmega128d3, atxmega192a3,
> atxmega192d3, atxmega256a3,
> >>>>> + * atxmega256a3b, atxmega256a3bu, atxmega256d3,
> atxmega128a3u, atxmega128b1,
> >>>>> + * atxmega128b3, atxmega128c3, atxmega128d4,
> atxmega192a3u, atxmega192c3,
> >>>>> + * atxmega256a3u, atxmega256c3, atxmega384c3, atxmega384d3
> >>>>> + */
> >>>>> +static void avr_xmega6_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +/*
> >>>>> + * Setting features of AVR core type xmega7
> >>>>> + * --------------------------------------
> >>>>> + *
> >>>>> + * This type of AVR core is present in the following AVR
> MCUs:
> >>>>> + *
> >>>>> + * atxmega128a1, atxmega128a1u, atxmega128a4u
> >>>>> + */
> >>>>> +static void avr_xmega7_initfn(Object *obj)
> >>>>> +{
> >>>>> + AVRCPU *cpu = AVR_CPU(obj);
> >>>>> + CPUAVRState *env = &cpu->env;
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_IJMP_ICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ADIW_SBIW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_SRAM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_BREAK);
> >>>>> +
> >>>>> + set_avr_feature(env, AVR_FEATURE_3_BYTE_PC);
> >>>>> + set_avr_feature(env, AVR_FEATURE_2_BYTE_SP);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPD);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPY);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RAMPZ);
> >>>>> + set_avr_feature(env, AVR_FEATURE_EIJMP_EICALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_ELPM);
> >>>>> + set_avr_feature(env, AVR_FEATURE_JMP_CALL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_LPMX);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MOVW);
> >>>>> + set_avr_feature(env, AVR_FEATURE_MUL);
> >>>>> + set_avr_feature(env, AVR_FEATURE_RMW);
> >>>>> +}
> >>>>> +
> >>>>> +typedef struct AVRCPUInfo {
> >>>>> + const char *name;
> >>>>> + void (*initfn)(Object *obj);
> >>>>> +} AVRCPUInfo;
> >>>>> +
> >>>>> +
> >>>>> +static void avr_cpu_list_entry(gpointer data, gpointer
> user_data)
> >>>>> +{
> >>>>> + const char *typename =
> object_class_get_name(OBJECT_CLASS(data));
> >>>>> +
> >>>>> + qemu_printf("%s\n", typename);
> >>>>> +}
> >>>>> +
> >>>>> +void avr_cpu_list(void)
> >>>>> +{
> >>>>> + GSList *list;
> >>>>> + list = object_class_get_list_sorted(TYPE_AVR_CPU, false);
> >>>>> + g_slist_foreach(list, avr_cpu_list_entry, NULL);
> >>>>> + g_slist_free(list);
> >>>>> +}
> >>>>> +
> >>>>> +#define DEFINE_AVR_CPU_TYPE(model, initfn) \
> >>>>> + { \
> >>>>> + .parent = TYPE_AVR_CPU, \
> >>>>> + .instance_init = initfn, \
> >>>>> + .name = AVR_CPU_TYPE_NAME(model), \
> >>>>> + }
> >>>>> +
> >>>>> +static const TypeInfo avr_cpu_type_info[] = {
> >>>>> + {
> >>>>> + .name = TYPE_AVR_CPU,
> >>>>> + .parent = TYPE_CPU,
> >>>>> + .instance_size = sizeof(AVRCPU),
> >>>>> + .instance_init = avr_cpu_initfn,
> >>>>> + .class_size = sizeof(AVRCPUClass),
> >>>>> + .class_init = avr_cpu_class_init,
> >>>>> + .abstract = true,
> >>>>> + },
> >>>>> + DEFINE_AVR_CPU_TYPE("avrtiny", avr_avrtiny_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr1", avr_avr1_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr2", avr_avr2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr25", avr_avr25_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr3", avr_avr3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr31", avr_avr31_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr35", avr_avr35_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr4", avr_avr4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr5", avr_avr5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr51", avr_avr51_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("avr6", avr_avr6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega2", avr_xmega2_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega3", avr_xmega3_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega4", avr_xmega4_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega5", avr_xmega5_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega6", avr_xmega6_initfn),
> >>>>> + DEFINE_AVR_CPU_TYPE("xmega7", avr_xmega7_initfn),
> >>>>> +};
> >>>>> +
> >>>>> +const char *avr_flags_to_cpu_type(uint32_t flags, const
> char *def_cpu_type)
> >>>>> +{
> >>>>> + switch (flags & EF_AVR_MACH) {
> >>>>> + case bfd_mach_avr1:
> >>>>> + return AVR_CPU_TYPE_NAME("avr1");
> >>>>> + case bfd_mach_avr2:
> >>>>> + return AVR_CPU_TYPE_NAME("avr2");
> >>>>> + case bfd_mach_avr25:
> >>>>> + return AVR_CPU_TYPE_NAME("avr25");
> >>>>> + case bfd_mach_avr3:
> >>>>> + return AVR_CPU_TYPE_NAME("avr3");
> >>>>> + case bfd_mach_avr31:
> >>>>> + return AVR_CPU_TYPE_NAME("avr31");
> >>>>> + case bfd_mach_avr35:
> >>>>> + return AVR_CPU_TYPE_NAME("avr35");
> >>>>> + case bfd_mach_avr4:
> >>>>> + return AVR_CPU_TYPE_NAME("avr4");
> >>>>> + case bfd_mach_avr5:
> >>>>> + return AVR_CPU_TYPE_NAME("avr5");
> >>>>> + case bfd_mach_avr51:
> >>>>> + return AVR_CPU_TYPE_NAME("avr51");
> >>>>> + case bfd_mach_avr6:
> >>>>> + return AVR_CPU_TYPE_NAME("avr6");
> >>>>> + case bfd_mach_avrtiny:
> >>>>> + return AVR_CPU_TYPE_NAME("avrtiny");
> >>>>> + case bfd_mach_avrxmega2:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega2");
> >>>>> + case bfd_mach_avrxmega3:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega3");
> >>>>> + case bfd_mach_avrxmega4:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega4");
> >>>>> + case bfd_mach_avrxmega5:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega5");
> >>>>> + case bfd_mach_avrxmega6:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega6");
> >>>>> + case bfd_mach_avrxmega7:
> >>>>> + return AVR_CPU_TYPE_NAME("xmega7");
> >>>>> + default:
> >>>>> + return def_cpu_type;
> >>>>> + }
> >>>>> +}
> >>>>> +
> >>>>> +DEFINE_TYPES(avr_cpu_type_info)
> >>>>>
> >>>>
> >>>> Hi! me again. Following the RC2 discussion. I've being
> looking in the GCC definition of the architecture and as far as
> I can understand this definitions are the generic definitions of
> the arch families.
> >>>>
> >>>> avr_arch_types[] =
> >>>> {
> >>>> /* unknown device specified */
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> NULL, AVR_MMCU_DEFAULT },
> >>>> /*
> >>>> A M J LM E E E X R T d S FPO S O A
> >>>> S U M PO L L I M A I a t lMff F ff r
> >>>> M L P MV P P J E M N t a a s R s c
> >>>> XW M M M G P Y a r s e e h
> >>>> X P A D t h t t
> ID */
> >>>> { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "1", "avr1" },
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "2", "avr2" },
> >>>> { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "25", "avr25" },
> >>>> { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "3", "avr3" },
> >>>> { 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "31", "avr31" },
> >>>> { 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "35", "avr35" },
> >>>> { 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "4", "avr4" },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0x0060, 0, 32,
> "5", "avr5" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0x0060, 0, 32,
> "51", "avr51" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0x0060, 0, 32,
> "6", "avr6" },
> >>>>
> >>>> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0x0040, 0x4000, 0,
> "100", "avrtiny"},
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0, 0,
> "102", "avrxmega2" },
> >>>> { 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0x2000, 0x8000, 0,
> "103", "avrxmega3" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0x2000, 0, 0,
> "104", "avrxmega4" },
> >>>> { 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0x2000, 0, 0,
> "105", "avrxmega5" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0x2000, 0, 0,
> "106", "avrxmega6" },
> >>>> { 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0x2000, 0, 0,
> "107", "avrxmega7" }
> >>>> };
> >>>>
> >>>> And then you have features for the specific microcontrollers:
> >>>>
> >>>> AVR_ISA_RMW
> >>>> AVR_SHORT_SP
> >>>> AVR_ERRATA_SKIP
> >>>> AVR_ISA_LDS
> >>>> AVR_ISA_RCALL
> >>>>
> >>>> They are mixed in the file 'avr-mcus.def' for family and
> microcontroller definition. Only looking at the family definition:
> >>>>
> >>>> AVR_MCU ("avr2", ARCH_AVR2, AVR_ERRATA_SKIP,
> NULL, 0x0060, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avr25", ARCH_AVR25, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr3", ARCH_AVR3, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x6000, 0)
> >>>> AVR_MCU ("avr31", ARCH_AVR31, AVR_ERRATA_SKIP,
> NULL, 0x0060, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr35", ARCH_AVR35, AVR_ISA_NONE,
> NULL, 0x0100, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr4", ARCH_AVR4, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x2000, 0)
> >>>> AVR_MCU ("avr5", ARCH_AVR5, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x4000, 0)
> >>>> AVR_MCU ("avr51", ARCH_AVR51, AVR_ISA_NONE,
> NULL, 0x0100, 0x0, 0x20000, 0)
> >>>> AVR_MCU ("avr6", ARCH_AVR6, AVR_ISA_NONE,
> NULL, 0x0200, 0x0, 0x40000, 0)
> >>>> AVR_MCU ("avrxmega2", ARCH_AVRXMEGA2, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x9000, 0)
> >>>> AVR_MCU ("avrxmega3", ARCH_AVRXMEGA3,
> AVR_ISA_NONE, NULL, 0x3f00, 0x0, 0x8000, 0)
> >>>> AVR_MCU ("avrxmega4", ARCH_AVRXMEGA4, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega5", ARCH_AVRXMEGA5, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x11000, 0)
> >>>> AVR_MCU ("avrxmega6", ARCH_AVRXMEGA6, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x60000, 0)
> >>>> AVR_MCU ("avrxmega7", ARCH_AVRXMEGA7, AVR_ISA_NONE,
> NULL, 0x2000, 0x0, 0x22000, 0)
> >>>> AVR_MCU ("avrtiny", ARCH_AVRTINY, AVR_ISA_NONE,
> NULL, 0x0040, 0x0, 0x400, 0)
> >>>> AVR_MCU ("avr1", ARCH_AVR1, AVR_ISA_NONE,
> NULL, 0x0060, 0x0, 0x400, 0)
> >>>>
> >>>> I don't really understand how do you get to the proposed
> family definition for qemu. Probably is my fault but if you can
> help me to understand will be grate!
> >>>>
> >>>
> >>> Michal, can you really give us more details on how this
> mapping is done?
> >>>
> >>> I alredy asked a similar question a while ago, and then you
> said you used wikipedia article + avr datasheets. Can you give
> us more detailed info of the whole process of creating
> ABRFeature list for a particular AVR core type, and how that
> compares with the corresponding content in gcc, as Joakin
> brought to our attention?
> >>>
> >>> Thanks, Aleksandar
> >>>
> >>>
> >>>
> >>>>
> >>>> Regards,
> >>>> --joa
> >>
> >>
> >>
> >> --
> >> Best Regards,
> >> Michael Rolnik
> >
> >
> >
> > --
> > Best Regards,
> > Michael Rolnik
>
>
>
> --
> Best Regards,
> Michael Rolnik
>
>
>
> --
> Best Regards,
> Michael Rolnik
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 07/29] target/avr: Add instruction helpers
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (5 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 06/29] target/avr: Add defintions of AVR core types Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-02-01 12:27 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 08/29] target/avr: Add instruction translation - Register definitions Aleksandar Markovic
` (23 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Add helpers for instructions that need to interact with QEMU. Also,
add stubs for unimplemented instructions. Instructions SPM and WDR
are left unimplemented because they require emulation of complex
peripherals. The implementation of instruction SLEEP is very limited
due to the lack of peripherals to generate wake interrupts. Memory
access instructions are implemented here because some address ranges
actually refer to CPU registers.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/helper.c | 203 ++++++++++++++++++++++++++++++++++++++++++++++++++++
target/avr/helper.h | 29 ++++++++
2 files changed, 232 insertions(+)
create mode 100644 target/avr/helper.h
diff --git a/target/avr/helper.c b/target/avr/helper.c
index 354def2..c582312 100644
--- a/target/avr/helper.c
+++ b/target/avr/helper.c
@@ -137,3 +137,206 @@ bool avr_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
return true;
}
+
+/*
+ * helpers
+ */
+
+void helper_sleep(CPUAVRState *env)
+{
+ CPUState *cs = env_cpu(env);
+
+ cs->exception_index = EXCP_HLT;
+ cpu_loop_exit(cs);
+}
+
+void helper_unsupported(CPUAVRState *env)
+{
+ CPUState *cs = env_cpu(env);
+
+ /*
+ * I count not find what happens on the real platform, so
+ * it's EXCP_DEBUG for meanwhile
+ */
+ cs->exception_index = EXCP_DEBUG;
+ if (qemu_loglevel_mask(LOG_UNIMP)) {
+ qemu_log("UNSUPPORTED\n");
+ cpu_dump_state(cs, stderr, 0);
+ }
+ cpu_loop_exit(cs);
+}
+
+void helper_debug(CPUAVRState *env)
+{
+ CPUState *cs = env_cpu(env);
+
+ cs->exception_index = EXCP_DEBUG;
+ cpu_loop_exit(cs);
+}
+
+void helper_break(CPUAVRState *env)
+{
+ CPUState *cs = env_cpu(env);
+
+ cs->exception_index = EXCP_DEBUG;
+ cpu_loop_exit(cs);
+}
+
+void helper_wdr(CPUAVRState *env)
+{
+ CPUState *cs = env_cpu(env);
+
+ /* WD is not implemented yet, placeholder */
+ cs->exception_index = EXCP_DEBUG;
+ cpu_loop_exit(cs);
+}
+
+/*
+ * This function implements IN instruction
+ *
+ * It does the following
+ * a. if an IO register belongs to CPU, its value is read and returned
+ * b. otherwise io address is translated to mem address and physical memory
+ * is read.
+ * c. it caches the value for sake of SBI, SBIC, SBIS & CBI implementation
+ *
+ */
+target_ulong helper_inb(CPUAVRState *env, uint32_t port)
+{
+ target_ulong data = 0;
+
+ switch (port) {
+ case 0x38: /* RAMPD */
+ data = 0xff & (env->rampD >> 16);
+ break;
+ case 0x39: /* RAMPX */
+ data = 0xff & (env->rampX >> 16);
+ break;
+ case 0x3a: /* RAMPY */
+ data = 0xff & (env->rampY >> 16);
+ break;
+ case 0x3b: /* RAMPZ */
+ data = 0xff & (env->rampZ >> 16);
+ break;
+ case 0x3c: /* EIND */
+ data = 0xff & (env->eind >> 16);
+ break;
+ case 0x3d: /* SPL */
+ data = env->sp & 0x00ff;
+ break;
+ case 0x3e: /* SPH */
+ data = env->sp >> 8;
+ break;
+ case 0x3f: /* SREG */
+ data = cpu_get_sreg(env);
+ break;
+ default:
+ /* not a special register, pass to normal memory access */
+ cpu_physical_memory_read(OFFSET_IO_REGISTERS + port, &data, 1);
+ }
+
+ return data;
+}
+
+/*
+ * This function implements OUT instruction
+ *
+ * It does the following
+ * a. if an IO register belongs to CPU, its value is written into the register
+ * b. otherwise io address is translated to mem address and physical memory
+ * is written.
+ * c. it caches the value for sake of SBI, SBIC, SBIS & CBI implementation
+ *
+ */
+void helper_outb(CPUAVRState *env, uint32_t port, uint32_t data)
+{
+ data &= 0x000000ff;
+
+ switch (port) {
+ case 0x38: /* RAMPD */
+ if (avr_feature(env, AVR_FEATURE_RAMPD)) {
+ env->rampD = (data & 0xff) << 16;
+ }
+ break;
+ case 0x39: /* RAMPX */
+ if (avr_feature(env, AVR_FEATURE_RAMPX)) {
+ env->rampX = (data & 0xff) << 16;
+ }
+ break;
+ case 0x3a: /* RAMPY */
+ if (avr_feature(env, AVR_FEATURE_RAMPY)) {
+ env->rampY = (data & 0xff) << 16;
+ }
+ break;
+ case 0x3b: /* RAMPZ */
+ if (avr_feature(env, AVR_FEATURE_RAMPZ)) {
+ env->rampZ = (data & 0xff) << 16;
+ }
+ break;
+ case 0x3c: /* EIDN */
+ env->eind = (data & 0xff) << 16;
+ break;
+ case 0x3d: /* SPL */
+ env->sp = (env->sp & 0xff00) | (data);
+ break;
+ case 0x3e: /* SPH */
+ if (avr_feature(env, AVR_FEATURE_2_BYTE_SP)) {
+ env->sp = (env->sp & 0x00ff) | (data << 8);
+ }
+ break;
+ case 0x3f: /* SREG */
+ cpu_set_sreg(env, data);
+ break;
+ default:
+ /* not a special register, pass to normal memory access */
+ cpu_physical_memory_write(OFFSET_IO_REGISTERS + port, &data, 1);
+ }
+}
+
+/*
+ * this function implements LD instruction when there is a posibility to read
+ * from a CPU register
+ */
+target_ulong helper_fullrd(CPUAVRState *env, uint32_t addr)
+{
+ uint8_t data;
+
+ env->fullacc = false;
+
+ if (addr < NUMBER_OF_CPU_REGISTERS) {
+ /* CPU registers */
+ data = env->r[addr];
+ } else if (addr < NUMBER_OF_CPU_REGISTERS + NUMBER_OF_IO_REGISTERS) {
+ /* IO registers */
+ data = helper_inb(env, addr - NUMBER_OF_CPU_REGISTERS);
+ } else {
+ /* memory */
+ cpu_physical_memory_read(OFFSET_DATA + addr, &data, 1);
+ }
+ return data;
+}
+
+/*
+ * this function implements ST instruction when there is a posibility to write
+ * into a CPU register
+ */
+void helper_fullwr(CPUAVRState *env, uint32_t data, uint32_t addr)
+{
+ env->fullacc = false;
+
+ /* Following logic assumes this: */
+ assert(OFFSET_CPU_REGISTERS == OFFSET_DATA);
+ assert(OFFSET_IO_REGISTERS == OFFSET_CPU_REGISTERS +
+ NUMBER_OF_CPU_REGISTERS);
+
+ if (addr < NUMBER_OF_CPU_REGISTERS) {
+ /* CPU registers */
+ env->r[addr] = data;
+ } else if (addr < NUMBER_OF_CPU_REGISTERS + NUMBER_OF_IO_REGISTERS) {
+ /* IO registers */
+ helper_outb(env, addr - NUMBER_OF_CPU_REGISTERS, data);
+ } else {
+ /* memory */
+ cpu_physical_memory_write(OFFSET_DATA + addr, &data, 1);
+ }
+}
diff --git a/target/avr/helper.h b/target/avr/helper.h
new file mode 100644
index 0000000..bf08750
--- /dev/null
+++ b/target/avr/helper.h
@@ -0,0 +1,29 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+DEF_HELPER_1(wdr, void, env)
+DEF_HELPER_1(debug, void, env)
+DEF_HELPER_1(break, void, env)
+DEF_HELPER_1(sleep, void, env)
+DEF_HELPER_1(unsupported, void, env)
+DEF_HELPER_3(outb, void, env, i32, i32)
+DEF_HELPER_2(inb, tl, env, i32)
+DEF_HELPER_3(fullwr, void, env, i32, i32)
+DEF_HELPER_2(fullrd, tl, env, i32)
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 07/29] target/avr: Add instruction helpers
2020-01-31 0:02 ` [PATCH rc4 07/29] target/avr: Add instruction helpers Aleksandar Markovic
@ 2020-02-01 12:27 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-02-01 12:27 UTC (permalink / raw)
To: Aleksandar Markovic; +Cc: Richard Henderson, Michael Rolnik, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 9631 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> Add helpers for instructions that need to interact with QEMU. Also,
> add stubs for unimplemented instructions. Instructions SPM and WDR
> are left unimplemented because they require emulation of complex
> peripherals. The implementation of instruction SLEEP is very limited
> due to the lack of peripherals to generate wake interrupts. Memory
> access instructions are implemented here because some address ranges
> actually refer to CPU registers.
>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
Hello, Michael.
Regarding this and patches 8-14, I did not find any functional
inaccuracies. "avrtiny" issues (lack of support for cores with fewer
registers) are agreed to be addressed later on, some time after the merge,
as not critical for the rest of series.
I had, and still have some concerns about missing comments and code
readibility in general (details can be seen in my previuos reviews). I have
some concerns about lack of usage of enum AVRFeature in some functions
(instead of int). I have some concerns abuot functions organization too.
But, all of these concerns are not related to the final functionality. In
my view, it is even too risky to address them at this stage of the series.
They can be easily addressed after the series merge.
Therefore:
For patches 7-14:
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> target/avr/helper.c | 203 ++++++++++++++++++++++++++++++
> ++++++++++++++++++++++
> target/avr/helper.h | 29 ++++++++
> 2 files changed, 232 insertions(+)
> create mode 100644 target/avr/helper.h
>
> diff --git a/target/avr/helper.c b/target/avr/helper.c
> index 354def2..c582312 100644
> --- a/target/avr/helper.c
> +++ b/target/avr/helper.c
> @@ -137,3 +137,206 @@ bool avr_cpu_tlb_fill(CPUState *cs, vaddr address,
> int size,
>
> return true;
> }
> +
> +/*
> + * helpers
> + */
> +
> +void helper_sleep(CPUAVRState *env)
> +{
> + CPUState *cs = env_cpu(env);
> +
> + cs->exception_index = EXCP_HLT;
> + cpu_loop_exit(cs);
> +}
> +
> +void helper_unsupported(CPUAVRState *env)
> +{
> + CPUState *cs = env_cpu(env);
> +
> + /*
> + * I count not find what happens on the real platform, so
> + * it's EXCP_DEBUG for meanwhile
> + */
> + cs->exception_index = EXCP_DEBUG;
> + if (qemu_loglevel_mask(LOG_UNIMP)) {
> + qemu_log("UNSUPPORTED\n");
> + cpu_dump_state(cs, stderr, 0);
> + }
> + cpu_loop_exit(cs);
> +}
> +
> +void helper_debug(CPUAVRState *env)
> +{
> + CPUState *cs = env_cpu(env);
> +
> + cs->exception_index = EXCP_DEBUG;
> + cpu_loop_exit(cs);
> +}
> +
> +void helper_break(CPUAVRState *env)
> +{
> + CPUState *cs = env_cpu(env);
> +
> + cs->exception_index = EXCP_DEBUG;
> + cpu_loop_exit(cs);
> +}
> +
> +void helper_wdr(CPUAVRState *env)
> +{
> + CPUState *cs = env_cpu(env);
> +
> + /* WD is not implemented yet, placeholder */
> + cs->exception_index = EXCP_DEBUG;
> + cpu_loop_exit(cs);
> +}
> +
> +/*
> + * This function implements IN instruction
> + *
> + * It does the following
> + * a. if an IO register belongs to CPU, its value is read and returned
> + * b. otherwise io address is translated to mem address and physical
> memory
> + * is read.
> + * c. it caches the value for sake of SBI, SBIC, SBIS & CBI
> implementation
> + *
> + */
> +target_ulong helper_inb(CPUAVRState *env, uint32_t port)
> +{
> + target_ulong data = 0;
> +
> + switch (port) {
> + case 0x38: /* RAMPD */
> + data = 0xff & (env->rampD >> 16);
> + break;
> + case 0x39: /* RAMPX */
> + data = 0xff & (env->rampX >> 16);
> + break;
> + case 0x3a: /* RAMPY */
> + data = 0xff & (env->rampY >> 16);
> + break;
> + case 0x3b: /* RAMPZ */
> + data = 0xff & (env->rampZ >> 16);
> + break;
> + case 0x3c: /* EIND */
> + data = 0xff & (env->eind >> 16);
> + break;
> + case 0x3d: /* SPL */
> + data = env->sp & 0x00ff;
> + break;
> + case 0x3e: /* SPH */
> + data = env->sp >> 8;
> + break;
> + case 0x3f: /* SREG */
> + data = cpu_get_sreg(env);
> + break;
> + default:
> + /* not a special register, pass to normal memory access */
> + cpu_physical_memory_read(OFFSET_IO_REGISTERS + port, &data, 1);
> + }
> +
> + return data;
> +}
> +
> +/*
> + * This function implements OUT instruction
> + *
> + * It does the following
> + * a. if an IO register belongs to CPU, its value is written into the
> register
> + * b. otherwise io address is translated to mem address and physical
> memory
> + * is written.
> + * c. it caches the value for sake of SBI, SBIC, SBIS & CBI
> implementation
> + *
> + */
> +void helper_outb(CPUAVRState *env, uint32_t port, uint32_t data)
> +{
> + data &= 0x000000ff;
> +
> + switch (port) {
> + case 0x38: /* RAMPD */
> + if (avr_feature(env, AVR_FEATURE_RAMPD)) {
> + env->rampD = (data & 0xff) << 16;
> + }
> + break;
> + case 0x39: /* RAMPX */
> + if (avr_feature(env, AVR_FEATURE_RAMPX)) {
> + env->rampX = (data & 0xff) << 16;
> + }
> + break;
> + case 0x3a: /* RAMPY */
> + if (avr_feature(env, AVR_FEATURE_RAMPY)) {
> + env->rampY = (data & 0xff) << 16;
> + }
> + break;
> + case 0x3b: /* RAMPZ */
> + if (avr_feature(env, AVR_FEATURE_RAMPZ)) {
> + env->rampZ = (data & 0xff) << 16;
> + }
> + break;
> + case 0x3c: /* EIDN */
> + env->eind = (data & 0xff) << 16;
> + break;
> + case 0x3d: /* SPL */
> + env->sp = (env->sp & 0xff00) | (data);
> + break;
> + case 0x3e: /* SPH */
> + if (avr_feature(env, AVR_FEATURE_2_BYTE_SP)) {
> + env->sp = (env->sp & 0x00ff) | (data << 8);
> + }
> + break;
> + case 0x3f: /* SREG */
> + cpu_set_sreg(env, data);
> + break;
> + default:
> + /* not a special register, pass to normal memory access */
> + cpu_physical_memory_write(OFFSET_IO_REGISTERS + port, &data, 1);
> + }
> +}
> +
> +/*
> + * this function implements LD instruction when there is a posibility to
> read
> + * from a CPU register
> + */
> +target_ulong helper_fullrd(CPUAVRState *env, uint32_t addr)
> +{
> + uint8_t data;
> +
> + env->fullacc = false;
> +
> + if (addr < NUMBER_OF_CPU_REGISTERS) {
> + /* CPU registers */
> + data = env->r[addr];
> + } else if (addr < NUMBER_OF_CPU_REGISTERS + NUMBER_OF_IO_REGISTERS) {
> + /* IO registers */
> + data = helper_inb(env, addr - NUMBER_OF_CPU_REGISTERS);
> + } else {
> + /* memory */
> + cpu_physical_memory_read(OFFSET_DATA + addr, &data, 1);
> + }
> + return data;
> +}
> +
> +/*
> + * this function implements ST instruction when there is a posibility to
> write
> + * into a CPU register
> + */
> +void helper_fullwr(CPUAVRState *env, uint32_t data, uint32_t addr)
> +{
> + env->fullacc = false;
> +
> + /* Following logic assumes this: */
> + assert(OFFSET_CPU_REGISTERS == OFFSET_DATA);
> + assert(OFFSET_IO_REGISTERS == OFFSET_CPU_REGISTERS +
> + NUMBER_OF_CPU_REGISTERS);
> +
> + if (addr < NUMBER_OF_CPU_REGISTERS) {
> + /* CPU registers */
> + env->r[addr] = data;
> + } else if (addr < NUMBER_OF_CPU_REGISTERS + NUMBER_OF_IO_REGISTERS) {
> + /* IO registers */
> + helper_outb(env, addr - NUMBER_OF_CPU_REGISTERS, data);
> + } else {
> + /* memory */
> + cpu_physical_memory_write(OFFSET_DATA + addr, &data, 1);
> + }
> +}
> diff --git a/target/avr/helper.h b/target/avr/helper.h
> new file mode 100644
> index 0000000..bf08750
> --- /dev/null
> +++ b/target/avr/helper.h
> @@ -0,0 +1,29 @@
> +/*
> + * QEMU AVR CPU
> + *
> + * Copyright (c) 2019 Michael Rolnik
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> + */
> +
> +DEF_HELPER_1(wdr, void, env)
> +DEF_HELPER_1(debug, void, env)
> +DEF_HELPER_1(break, void, env)
> +DEF_HELPER_1(sleep, void, env)
> +DEF_HELPER_1(unsupported, void, env)
> +DEF_HELPER_3(outb, void, env, i32, i32)
> +DEF_HELPER_2(inb, tl, env, i32)
> +DEF_HELPER_3(fullwr, void, env, i32, i32)
> +DEF_HELPER_2(fullrd, tl, env, i32)
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 11682 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 08/29] target/avr: Add instruction translation - Register definitions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (6 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 07/29] target/avr: Add instruction helpers Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 09/29] target/avr: Add instruction translation - Arithmetic and Logic Instructions Aleksandar Markovic
` (22 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Start implementation of instructions by adding register definitions.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/translate.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 171 insertions(+)
create mode 100644 target/avr/translate.c
diff --git a/target/avr/translate.c b/target/avr/translate.c
new file mode 100644
index 0000000..535f666
--- /dev/null
+++ b/target/avr/translate.c
@@ -0,0 +1,171 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/qemu-print.h"
+#include "tcg/tcg.h"
+#include "cpu.h"
+#include "exec/exec-all.h"
+#include "tcg/tcg-op.h"
+#include "exec/cpu_ldst.h"
+#include "exec/helper-proto.h"
+#include "exec/helper-gen.h"
+#include "exec/log.h"
+#include "exec/translator.h"
+#include "exec/gen-icount.h"
+
+/*
+ * Define if you want a BREAK instruction translated to a breakpoint
+ * Active debugging connection is assumed
+ * This is for
+ * https://github.com/seharris/qemu-avr-tests/tree/master/instruction-tests
+ * tests
+ */
+#undef BREAKPOINT_ON_BREAK
+
+static TCGv cpu_pc;
+
+static TCGv cpu_Cf;
+static TCGv cpu_Zf;
+static TCGv cpu_Nf;
+static TCGv cpu_Vf;
+static TCGv cpu_Sf;
+static TCGv cpu_Hf;
+static TCGv cpu_Tf;
+static TCGv cpu_If;
+
+static TCGv cpu_rampD;
+static TCGv cpu_rampX;
+static TCGv cpu_rampY;
+static TCGv cpu_rampZ;
+
+static TCGv cpu_r[NUMBER_OF_CPU_REGISTERS];
+static TCGv cpu_eind;
+static TCGv cpu_sp;
+
+static TCGv cpu_skip;
+
+static const char reg_names[NUMBER_OF_CPU_REGISTERS][8] = {
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+};
+#define REG(x) (cpu_r[x])
+
+enum {
+ DISAS_EXIT = DISAS_TARGET_0, /* We want return to the cpu main loop. */
+ DISAS_LOOKUP = DISAS_TARGET_1, /* We have a variable condition exit. */
+ DISAS_CHAIN = DISAS_TARGET_2, /* We have a single condition exit. */
+};
+
+typedef struct DisasContext DisasContext;
+
+/* This is the state at translation time. */
+struct DisasContext {
+ TranslationBlock *tb;
+
+ CPUAVRState *env;
+ CPUState *cs;
+
+ target_long npc;
+ uint32_t opcode;
+
+ /* Routine used to access memory */
+ int memidx;
+ int bstate;
+ int singlestep;
+
+ /*
+ * some AVR instructions can make the following instruction to be skipped
+ * Let's name those instructions
+ * A - instruction that can skip the next one
+ * B - instruction that can be skipped. this depends on execution of A
+ * there are two scenarios
+ * 1. A and B belong to the same translation block
+ * 2. A is the last instruction in the translation block and B is the last
+ *
+ * following variables are used to simplify the skipping logic, they are
+ * used in the following manner (sketch)
+ *
+ * TCGLabel *skip_label = NULL;
+ * if (ctx.skip_cond != TCG_COND_NEVER) {
+ * skip_label = gen_new_label();
+ * tcg_gen_brcond_tl(skip_cond, skip_var0, skip_var1, skip_label);
+ * }
+ *
+ * if (free_skip_var0) {
+ * tcg_temp_free(skip_var0);
+ * free_skip_var0 = false;
+ * }
+ *
+ * translate(&ctx);
+ *
+ * if (skip_label) {
+ * gen_set_label(skip_label);
+ * }
+ */
+ TCGv skip_var0;
+ TCGv skip_var1;
+ TCGCond skip_cond;
+ bool free_skip_var0;
+};
+
+static int to_regs_16_31_by_one(DisasContext *ctx, int indx)
+{
+ return 16 + (indx % 16);
+}
+
+static int to_regs_16_23_by_one(DisasContext *ctx, int indx)
+{
+ return 16 + (indx % 8);
+}
+static int to_regs_24_30_by_two(DisasContext *ctx, int indx)
+{
+ return 24 + (indx % 4) * 2;
+}
+static int to_regs_00_30_by_two(DisasContext *ctx, int indx)
+{
+ return (indx % 16) * 2;
+}
+
+static uint16_t next_word(DisasContext *ctx)
+{
+ return cpu_lduw_code(ctx->env, ctx->npc++ * 2);
+}
+
+static int append_16(DisasContext *ctx, int x)
+{
+ return x << 16 | next_word(ctx);
+}
+
+
+static bool avr_have_feature(DisasContext *ctx, int feature)
+{
+ if (!avr_feature(ctx->env, feature)) {
+ gen_helper_unsupported(cpu_env);
+ ctx->bstate = DISAS_NORETURN;
+ return false;
+ }
+ return true;
+}
+
+static bool decode_insn(DisasContext *ctx, uint16_t insn);
+#include "decode_insn.inc.c"
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 09/29] target/avr: Add instruction translation - Arithmetic and Logic Instructions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (7 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 08/29] target/avr: Add instruction translation - Register definitions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 10/29] target/avr: Add instruction translation - Branch Instructions Aleksandar Markovic
` (21 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes:
- ADD, ADC, ADIW
- SBIW, SUB, SUBI, SBC, SBCI
- AND, ANDI
- OR, ORI, EOR
- COM, NEG
- INC, DEC
- MUL, MULS, MULSU
- FMUL, FMULS, FMULSU
- DES
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/insn.decode | 93 ++++++
target/avr/translate.c | 752 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 845 insertions(+)
create mode 100644 target/avr/insn.decode
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
new file mode 100644
index 0000000..9c71ed6
--- /dev/null
+++ b/target/avr/insn.decode
@@ -0,0 +1,93 @@
+#
+# AVR instruction decode definitions.
+#
+# Copyright (c) 2019 Michael Rolnik <mrolnik@gmail.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, see <http://www.gnu.org/licenses/>.
+#
+
+#
+# regs_16_31_by_one = [16 .. 31]
+# regs_16_23_by_one = [16 .. 23]
+# regs_24_30_by_two = [24, 26, 28, 30]
+# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30]
+
+%rd 4:5
+%rr 9:1 0:4
+
+%rd_a 4:4 !function=to_regs_16_31_by_one
+%rd_b 4:3 !function=to_regs_16_23_by_one
+%rd_c 4:2 !function=to_regs_24_30_by_two
+%rd_d 4:4 !function=to_regs_00_30_by_two
+%rr_a 0:4 !function=to_regs_16_31_by_one
+%rr_b 0:3 !function=to_regs_16_23_by_one
+%rr_d 0:4 !function=to_regs_00_30_by_two
+
+%imm6 6:2 0:4
+%imm8 8:4 0:4
+
+%io_imm 9:2 0:4
+%ldst_d_imm 13:1 10:2 0:3
+
+# The 22-bit immediate is partially in the opcode word,
+# and partially in the next. Use append_16 to build the
+# complete 22-bit value.
+%imm_call 4:5 0:1 !function=append_16
+
+
+&rd_rr rd rr
+&rd_imm rd imm
+
+@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr
+@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_c imm=%imm6
+@op_rd_imm8 .... .... .... .... &rd_imm rd=%rd_a imm=%imm8
+@op_bit .... .... . bit:3 ....
+@op_bit_imm .... .. imm:s7 bit:3
+@fmul .... .... . ... . ... &rd_rr rd=%rd_b rr=%rr_b
+@io_rd_imm .... . .. ..... .... &rd_imm rd=%rd imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ... &rd_imm imm=%ldst_d_imm
+
+# The 16-bit immediate is completely in the next word.
+# Fields cannot be defined with no bits, so we cannot play
+# the same trick and append to a zero-bit value.
+# Defer reading the immediate until trans_{LDS,STS}.
+@ldst_s .... ... rd:5 .... imm=0
+
+#
+# Arithmetic Instructions
+#
+ADD 0000 11 . ..... .... @op_rd_rr
+ADC 0001 11 . ..... .... @op_rd_rr
+ADIW 1001 0110 .. .. .... @op_rd_imm6
+SUB 0001 10 . ..... .... @op_rd_rr
+SUBI 0101 .... .... .... @op_rd_imm8
+SBC 0000 10 . ..... .... @op_rd_rr
+SBCI 0100 .... .... .... @op_rd_imm8
+SBIW 1001 0111 .. .. .... @op_rd_imm6
+AND 0010 00 . ..... .... @op_rd_rr
+ANDI 0111 .... .... .... @op_rd_imm8
+OR 0010 10 . ..... .... @op_rd_rr
+ORI 0110 .... .... .... @op_rd_imm8
+EOR 0010 01 . ..... .... @op_rd_rr
+COM 1001 010 rd:5 0000
+NEG 1001 010 rd:5 0001
+INC 1001 010 rd:5 0011
+DEC 1001 010 rd:5 1010
+MUL 1001 11 . ..... .... @op_rd_rr
+MULS 0000 0010 .... .... &rd_rr rd=%rd_a rr=%rr_a
+MULSU 0000 0011 0 ... 0 ... @fmul
+FMUL 0000 0011 0 ... 1 ... @fmul
+FMULS 0000 0011 1 ... 0 ... @fmul
+FMULSU 0000 0011 1 ... 1 ... @fmul
+DES 1001 0100 imm:4 1011
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 535f666..00fb3f5 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -169,3 +169,755 @@ static bool avr_have_feature(DisasContext *ctx, int feature)
static bool decode_insn(DisasContext *ctx, uint16_t insn);
#include "decode_insn.inc.c"
+
+/*
+ * Arithmetic Instructions
+ */
+
+static void gen_add_CHf(TCGv R, TCGv Rd, TCGv Rr)
+{
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv t2 = tcg_temp_new_i32();
+ TCGv t3 = tcg_temp_new_i32();
+
+ tcg_gen_and_tl(t1, Rd, Rr); /* t1 = Rd & Rr */
+ tcg_gen_andc_tl(t2, Rd, R); /* t2 = Rd & ~R */
+ tcg_gen_andc_tl(t3, Rr, R); /* t3 = Rr & ~R */
+ tcg_gen_or_tl(t1, t1, t2); /* t1 = t1 | t2 | t3 */
+ tcg_gen_or_tl(t1, t1, t3);
+ tcg_gen_shri_tl(cpu_Cf, t1, 7); /* Cf = t1(7) */
+ tcg_gen_shri_tl(cpu_Hf, t1, 3); /* Hf = t1(3) */
+ tcg_gen_andi_tl(cpu_Hf, cpu_Hf, 1);
+
+ tcg_temp_free_i32(t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t1);
+}
+
+
+static void gen_add_Vf(TCGv R, TCGv Rd, TCGv Rr)
+{
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv t2 = tcg_temp_new_i32();
+
+ /* t1 = Rd & Rr & ~R | ~Rd & ~Rr & R */
+ /* = (Rd ^ R) & ~(Rd ^ Rr) */
+ tcg_gen_xor_tl(t1, Rd, R);
+ tcg_gen_xor_tl(t2, Rd, Rr);
+ tcg_gen_andc_tl(t1, t1, t2);
+ tcg_gen_shri_tl(cpu_Vf, t1, 7); /* Vf = t1(7) */
+
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t1);
+}
+
+
+static void gen_sub_CHf(TCGv R, TCGv Rd, TCGv Rr)
+{
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv t2 = tcg_temp_new_i32();
+ TCGv t3 = tcg_temp_new_i32();
+
+ tcg_gen_not_tl(t1, Rd); /* t1 = ~Rd */
+ tcg_gen_and_tl(t2, t1, Rr); /* t2 = ~Rd & Rr */
+ tcg_gen_or_tl(t3, t1, Rr); /* t3 = (~Rd | Rr) & R */
+ tcg_gen_and_tl(t3, t3, R);
+ tcg_gen_or_tl(t2, t2, t3); /* t2 = ~Rd & Rr | ~Rd & R | R & Rr */
+ tcg_gen_shri_tl(cpu_Cf, t2, 7); /* Cf = t2(7) */
+ tcg_gen_shri_tl(cpu_Hf, t2, 3); /* Hf = t2(3) */
+ tcg_gen_andi_tl(cpu_Hf, cpu_Hf, 1);
+
+ tcg_temp_free_i32(t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t1);
+}
+
+
+static void gen_sub_Vf(TCGv R, TCGv Rd, TCGv Rr)
+{
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv t2 = tcg_temp_new_i32();
+
+ /* t1 = Rd & ~Rr & ~R | ~Rd & Rr & R */
+ /* = (Rd ^ R) & (Rd ^ R) */
+ tcg_gen_xor_tl(t1, Rd, R);
+ tcg_gen_xor_tl(t2, Rd, Rr);
+ tcg_gen_and_tl(t1, t1, t2);
+ tcg_gen_shri_tl(cpu_Vf, t1, 7); /* Vf = t1(7) */
+
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t1);
+}
+
+
+static void gen_NSf(TCGv R)
+{
+ tcg_gen_shri_tl(cpu_Nf, R, 7); /* Nf = R(7) */
+ tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf); /* Sf = Nf ^ Vf */
+}
+
+
+static void gen_ZNSf(TCGv R)
+{
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ tcg_gen_shri_tl(cpu_Nf, R, 7); /* Nf = R(7) */
+ tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf); /* Sf = Nf ^ Vf */
+}
+
+/*
+ * Adds two registers without the C Flag and places the result in the
+ * destination register Rd.
+ */
+static bool trans_ADD(DisasContext *ctx, arg_ADD *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_add_tl(R, Rd, Rr); /* Rd = Rd + Rr */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_add_CHf(R, Rd, Rr);
+ gen_add_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Adds two registers and the contents of the C Flag and places the result in
+ * the destination register Rd.
+ */
+static bool trans_ADC(DisasContext *ctx, arg_ADC *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_add_tl(R, Rd, Rr); /* R = Rd + Rr + Cf */
+ tcg_gen_add_tl(R, R, cpu_Cf);
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_add_CHf(R, Rd, Rr);
+ gen_add_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Adds an immediate value (0 - 63) to a register pair and places the result
+ * in the register pair. This instruction operates on the upper four register
+ * pairs, and is well suited for operations on the pointer registers. This
+ * instruction is not available in all devices. Refer to the device specific
+ * instruction set summary.
+ */
+static bool trans_ADIW(DisasContext *ctx, arg_ADIW *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ADIW_SBIW)) {
+ return true;
+ }
+
+ TCGv RdL = cpu_r[a->rd];
+ TCGv RdH = cpu_r[a->rd + 1];
+ int Imm = (a->imm);
+ TCGv R = tcg_temp_new_i32();
+ TCGv Rd = tcg_temp_new_i32();
+
+ tcg_gen_deposit_tl(Rd, RdL, RdH, 8, 8); /* Rd = RdH:RdL */
+ tcg_gen_addi_tl(R, Rd, Imm); /* R = Rd + Imm */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make it 16 bits */
+ /* update status register */
+ tcg_gen_andc_tl(cpu_Cf, Rd, R); /* Cf = Rd & ~R */
+ tcg_gen_shri_tl(cpu_Cf, cpu_Cf, 15);
+ tcg_gen_andc_tl(cpu_Vf, R, Rd); /* Vf = R & ~Rd */
+ tcg_gen_shri_tl(cpu_Vf, cpu_Vf, 15);
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ tcg_gen_shri_tl(cpu_Nf, R, 15); /* Nf = R(15) */
+ tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */
+ /* update output registers */
+ tcg_gen_andi_tl(RdL, R, 0xff);
+ tcg_gen_shri_tl(RdH, R, 8);
+
+ tcg_temp_free_i32(Rd);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Subtracts two registers and places the result in the destination
+ * register Rd.
+ */
+static bool trans_SUB(DisasContext *ctx, arg_SUB *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ tcg_gen_andc_tl(cpu_Cf, Rd, R); /* Cf = Rd & ~R */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Subtracts a register and a constant and places the result in the
+ * destination register Rd. This instruction is working on Register R16 to R31
+ * and is very well suited for operations on the X, Y, and Z-pointers.
+ */
+static bool trans_SUBI(DisasContext *ctx, arg_SUBI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = tcg_const_i32(a->imm);
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Imm */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+ tcg_temp_free_i32(Rr);
+
+ return true;
+}
+
+/*
+ * Subtracts two registers and subtracts with the C Flag and places the
+ * result in the destination register Rd.
+ */
+static bool trans_SBC(DisasContext *ctx, arg_SBC *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv zero = tcg_const_i32(0);
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr - Cf */
+ tcg_gen_sub_tl(R, R, cpu_Cf);
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_NSf(R);
+
+ /*
+ * Previous value remains unchanged when the result is zero;
+ * cleared otherwise.
+ */
+ tcg_gen_movcond_tl(TCG_COND_EQ, cpu_Zf, R, zero, cpu_Zf, zero);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(zero);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * SBCI -- Subtract Immediate with Carry
+ */
+static bool trans_SBCI(DisasContext *ctx, arg_SBCI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = tcg_const_i32(a->imm);
+ TCGv R = tcg_temp_new_i32();
+ TCGv zero = tcg_const_i32(0);
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr - Cf */
+ tcg_gen_sub_tl(R, R, cpu_Cf);
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_NSf(R);
+
+ /*
+ * Previous value remains unchanged when the result is zero;
+ * cleared otherwise.
+ */
+ tcg_gen_movcond_tl(TCG_COND_EQ, cpu_Zf, R, zero, cpu_Zf, zero);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(zero);
+ tcg_temp_free_i32(R);
+ tcg_temp_free_i32(Rr);
+
+ return true;
+}
+
+/*
+ * Subtracts an immediate value (0-63) from a register pair and places the
+ * result in the register pair. This instruction operates on the upper four
+ * register pairs, and is well suited for operations on the Pointer Registers.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_SBIW(DisasContext *ctx, arg_SBIW *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ADIW_SBIW)) {
+ return true;
+ }
+
+ TCGv RdL = cpu_r[a->rd];
+ TCGv RdH = cpu_r[a->rd + 1];
+ int Imm = (a->imm);
+ TCGv R = tcg_temp_new_i32();
+ TCGv Rd = tcg_temp_new_i32();
+
+ tcg_gen_deposit_tl(Rd, RdL, RdH, 8, 8); /* Rd = RdH:RdL */
+ tcg_gen_subi_tl(R, Rd, Imm); /* R = Rd - Imm */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make it 16 bits */
+ /* update status register */
+ tcg_gen_andc_tl(cpu_Cf, R, Rd);
+ tcg_gen_shri_tl(cpu_Cf, cpu_Cf, 15); /* Cf = R & ~Rd */
+ tcg_gen_andc_tl(cpu_Vf, Rd, R);
+ tcg_gen_shri_tl(cpu_Vf, cpu_Vf, 15); /* Vf = Rd & ~R */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ tcg_gen_shri_tl(cpu_Nf, R, 15); /* Nf = R(15) */
+ tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf); /* Sf = Nf ^ Vf */
+ /* update output registers */
+ tcg_gen_andi_tl(RdL, R, 0xff);
+ tcg_gen_shri_tl(RdH, R, 8);
+
+ tcg_temp_free_i32(Rd);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Performs the logical AND between the contents of register Rd and register
+ * Rr and places the result in the destination register Rd.
+ */
+static bool trans_AND(DisasContext *ctx, arg_AND *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_and_tl(R, Rd, Rr); /* Rd = Rd and Rr */
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Vf, 0); /* Vf = 0 */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Performs the logical AND between the contents of register Rd and a constant
+ * and places the result in the destination register Rd.
+ */
+static bool trans_ANDI(DisasContext *ctx, arg_ANDI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ int Imm = (a->imm);
+
+ tcg_gen_andi_tl(Rd, Rd, Imm); /* Rd = Rd & Imm */
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Vf, 0x00); /* Vf = 0 */
+ gen_ZNSf(Rd);
+
+ return true;
+}
+
+/*
+ * Performs the logical OR between the contents of register Rd and register
+ * Rr and places the result in the destination register Rd.
+ */
+static bool trans_OR(DisasContext *ctx, arg_OR *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_or_tl(R, Rd, Rr);
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Vf, 0);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Performs the logical OR between the contents of register Rd and a
+ * constant and places the result in the destination register Rd.
+ */
+static bool trans_ORI(DisasContext *ctx, arg_ORI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ int Imm = (a->imm);
+
+ tcg_gen_ori_tl(Rd, Rd, Imm); /* Rd = Rd | Imm */
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Vf, 0x00); /* Vf = 0 */
+ gen_ZNSf(Rd);
+
+ return true;
+}
+
+/*
+ * Performs the logical EOR between the contents of register Rd and
+ * register Rr and places the result in the destination register Rd.
+ */
+static bool trans_EOR(DisasContext *ctx, arg_EOR *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+
+ tcg_gen_xor_tl(Rd, Rd, Rr);
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Vf, 0);
+ gen_ZNSf(Rd);
+
+ return true;
+}
+
+/*
+ * Clears the specified bits in register Rd. Performs the logical AND
+ * between the contents of register Rd and the complement of the constant mask
+ * K. The result will be placed in register Rd.
+ */
+static bool trans_COM(DisasContext *ctx, arg_COM *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_xori_tl(Rd, Rd, 0xff);
+ /* update status register */
+ tcg_gen_movi_tl(cpu_Cf, 1); /* Cf = 1 */
+ tcg_gen_movi_tl(cpu_Vf, 0); /* Vf = 0 */
+ gen_ZNSf(Rd);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Replaces the contents of register Rd with its two's complement; the
+ * value $80 is left unchanged.
+ */
+static bool trans_NEG(DisasContext *ctx, arg_NEG *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_const_i32(0);
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_sub_tl(R, t0, Rd); /* R = 0 - Rd */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, t0, Rd);
+ gen_sub_Vf(R, t0, Rd);
+ gen_ZNSf(R);
+ /* update output registers */
+ tcg_gen_mov_tl(Rd, R);
+
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * Adds one -1- to the contents of register Rd and places the result in the
+ * destination register Rd. The C Flag in SREG is not affected by the
+ * operation, thus allowing the INC instruction to be used on a loop counter in
+ * multiple-precision computations. When operating on unsigned numbers, only
+ * BREQ and BRNE branches can be expected to perform consistently. When
+ * operating on two's complement values, all signed branches are available.
+ */
+static bool trans_INC(DisasContext *ctx, arg_INC *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_addi_tl(Rd, Rd, 1);
+ tcg_gen_andi_tl(Rd, Rd, 0xff);
+ /* update status register */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Vf, Rd, 0x80); /* Vf = Rd == 0x80 */
+ gen_ZNSf(Rd);
+
+ return true;
+}
+
+/*
+ * Subtracts one -1- from the contents of register Rd and places the result
+ * in the destination register Rd. The C Flag in SREG is not affected by the
+ * operation, thus allowing the DEC instruction to be used on a loop counter in
+ * multiple-precision computations. When operating on unsigned values, only
+ * BREQ and BRNE branches can be expected to perform consistently. When
+ * operating on two's complement values, all signed branches are available.
+ */
+static bool trans_DEC(DisasContext *ctx, arg_DEC *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_subi_tl(Rd, Rd, 1); /* Rd = Rd - 1 */
+ tcg_gen_andi_tl(Rd, Rd, 0xff); /* make it 8 bits */
+ /* update status register */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Vf, Rd, 0x7f); /* Vf = Rd == 0x7f */
+ gen_ZNSf(Rd);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit unsigned multiplication.
+ */
+static bool trans_MUL(DisasContext *ctx, arg_MUL *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_mul_tl(R, Rd, Rr); /* R = Rd * Rr */
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication.
+ */
+static bool trans_MULS(DisasContext *ctx, arg_MULS *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ tcg_gen_ext8s_tl(t0, Rd); /* make Rd full 32 bit signed */
+ tcg_gen_ext8s_tl(t1, Rr); /* make Rr full 32 bit signed */
+ tcg_gen_mul_tl(R, t0, t1); /* R = Rd * Rr */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make it 16 bits */
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit multiplication of a
+ * signed and an unsigned number.
+ */
+static bool trans_MULSU(DisasContext *ctx, arg_MULSU *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv t0 = tcg_temp_new_i32();
+
+ tcg_gen_ext8s_tl(t0, Rd); /* make Rd full 32 bit signed */
+ tcg_gen_mul_tl(R, t0, Rr); /* R = Rd * Rr */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make R 16 bits */
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit unsigned
+ * multiplication and shifts the result one bit left.
+ */
+static bool trans_FMUL(DisasContext *ctx, arg_FMUL *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_mul_tl(R, Rd, Rr); /* R = Rd * Rr */
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ /* update output registers */
+ tcg_gen_shli_tl(R, R, 1);
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ tcg_gen_andi_tl(R1, R1, 0xff);
+
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication
+ * and shifts the result one bit left.
+ */
+static bool trans_FMULS(DisasContext *ctx, arg_FMULS *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ tcg_gen_ext8s_tl(t0, Rd); /* make Rd full 32 bit signed */
+ tcg_gen_ext8s_tl(t1, Rr); /* make Rr full 32 bit signed */
+ tcg_gen_mul_tl(R, t0, t1); /* R = Rd * Rr */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make it 16 bits */
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ /* update output registers */
+ tcg_gen_shli_tl(R, R, 1);
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ tcg_gen_andi_tl(R1, R1, 0xff);
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication
+ * and shifts the result one bit left.
+ */
+static bool trans_FMULSU(DisasContext *ctx, arg_FMULSU *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MUL)) {
+ return true;
+ }
+
+ TCGv R0 = cpu_r[0];
+ TCGv R1 = cpu_r[1];
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv t0 = tcg_temp_new_i32();
+
+ tcg_gen_ext8s_tl(t0, Rd); /* make Rd full 32 bit signed */
+ tcg_gen_mul_tl(R, t0, Rr); /* R = Rd * Rr */
+ tcg_gen_andi_tl(R, R, 0xffff); /* make it 16 bits */
+ /* update status register */
+ tcg_gen_shri_tl(cpu_Cf, R, 15); /* Cf = R(15) */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ /* update output registers */
+ tcg_gen_shli_tl(R, R, 1);
+ tcg_gen_andi_tl(R0, R, 0xff);
+ tcg_gen_shri_tl(R1, R, 8);
+ tcg_gen_andi_tl(R1, R1, 0xff);
+
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * The module is an instruction set extension to the AVR CPU, performing
+ * DES iterations. The 64-bit data block (plaintext or ciphertext) is placed in
+ * the CPU register file, registers R0-R7, where LSB of data is placed in LSB
+ * of R0 and MSB of data is placed in MSB of R7. The full 64-bit key (including
+ * parity bits) is placed in registers R8- R15, organized in the register file
+ * with LSB of key in LSB of R8 and MSB of key in MSB of R15. Executing one DES
+ * instruction performs one round in the DES algorithm. Sixteen rounds must be
+ * executed in increasing order to form the correct DES ciphertext or
+ * plaintext. Intermediate results are stored in the register file (R0-R15)
+ * after each DES instruction. The instruction's operand (K) determines which
+ * round is executed, and the half carry flag (H) determines whether encryption
+ * or decryption is performed. The DES algorithm is described in
+ * "Specifications for the Data Encryption Standard" (Federal Information
+ * Processing Standards Publication 46). Intermediate results in this
+ * implementation differ from the standard because the initial permutation and
+ * the inverse initial permutation are performed each iteration. This does not
+ * affect the result in the final ciphertext or plaintext, but reduces
+ * execution time.
+ */
+static bool trans_DES(DisasContext *ctx, arg_DES *a)
+{
+ /* TODO */
+ if (!avr_have_feature(ctx, AVR_FEATURE_DES)) {
+ return true;
+ }
+
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 10/29] target/avr: Add instruction translation - Branch Instructions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (8 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 09/29] target/avr: Add instruction translation - Arithmetic and Logic Instructions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 11/29] target/avr: Add instruction translation - Data Transfer Instructions Aleksandar Markovic
` (20 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes:
- RJMP, IJMP, EIJMP, JMP
- RCALL, ICALL, EICALL, CALL
- RET, RETI
- CPSE, CP, CPC, CPI
- SBRC, SBRS, SBIC, SBIS
- BRBC, BRBS
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/insn.decode | 24 +++
target/avr/translate.c | 532 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 556 insertions(+)
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
index 9c71ed6..32034c1 100644
--- a/target/avr/insn.decode
+++ b/target/avr/insn.decode
@@ -91,3 +91,27 @@ FMUL 0000 0011 0 ... 1 ... @fmul
FMULS 0000 0011 1 ... 0 ... @fmul
FMULSU 0000 0011 1 ... 1 ... @fmul
DES 1001 0100 imm:4 1011
+
+#
+# Branch Instructions
+#
+RJMP 1100 imm:s12
+IJMP 1001 0100 0000 1001
+EIJMP 1001 0100 0001 1001
+JMP 1001 010 ..... 110 . imm=%imm_call
+RCALL 1101 imm:s12
+ICALL 1001 0101 0000 1001
+EICALL 1001 0101 0001 1001
+CALL 1001 010 ..... 111 . imm=%imm_call
+RET 1001 0101 0000 1000
+RETI 1001 0101 0001 1000
+CPSE 0001 00 . ..... .... @op_rd_rr
+CP 0001 01 . ..... .... @op_rd_rr
+CPC 0000 01 . ..... .... @op_rd_rr
+CPI 0011 .... .... .... @op_rd_imm8
+SBRC 1111 110 rr:5 0 bit:3
+SBRS 1111 111 rr:5 0 bit:3
+SBIC 1001 1001 reg:5 bit:3
+SBIS 1001 1011 reg:5 bit:3
+BRBS 1111 00 ....... ... @op_bit_imm
+BRBC 1111 01 ....... ... @op_bit_imm
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 00fb3f5..3d40057 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -921,3 +921,535 @@ static bool trans_DES(DisasContext *ctx, arg_DES *a)
return true;
}
+
+/*
+ * Branch Instructions
+ */
+static void gen_jmp_ez(DisasContext *ctx)
+{
+ tcg_gen_deposit_tl(cpu_pc, cpu_r[30], cpu_r[31], 8, 8);
+ tcg_gen_or_tl(cpu_pc, cpu_pc, cpu_eind);
+ ctx->bstate = DISAS_LOOKUP;
+}
+
+static void gen_jmp_z(DisasContext *ctx)
+{
+ tcg_gen_deposit_tl(cpu_pc, cpu_r[30], cpu_r[31], 8, 8);
+ ctx->bstate = DISAS_LOOKUP;
+}
+
+static void gen_push_ret(DisasContext *ctx, int ret)
+{
+ if (avr_feature(ctx->env, AVR_FEATURE_1_BYTE_PC)) {
+
+ TCGv t0 = tcg_const_i32((ret & 0x0000ff));
+
+ tcg_gen_qemu_st_tl(t0, cpu_sp, MMU_DATA_IDX, MO_UB);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+
+ tcg_temp_free_i32(t0);
+ } else if (avr_feature(ctx->env, AVR_FEATURE_2_BYTE_PC)) {
+
+ TCGv t0 = tcg_const_i32((ret & 0x00ffff));
+
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+ tcg_gen_qemu_st_tl(t0, cpu_sp, MMU_DATA_IDX, MO_BEUW);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+
+ tcg_temp_free_i32(t0);
+
+ } else if (avr_feature(ctx->env, AVR_FEATURE_3_BYTE_PC)) {
+
+ TCGv lo = tcg_const_i32((ret & 0x0000ff));
+ TCGv hi = tcg_const_i32((ret & 0xffff00) >> 8);
+
+ tcg_gen_qemu_st_tl(lo, cpu_sp, MMU_DATA_IDX, MO_UB);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 2);
+ tcg_gen_qemu_st_tl(hi, cpu_sp, MMU_DATA_IDX, MO_BEUW);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+
+ tcg_temp_free_i32(lo);
+ tcg_temp_free_i32(hi);
+ }
+}
+
+static void gen_pop_ret(DisasContext *ctx, TCGv ret)
+{
+ if (avr_feature(ctx->env, AVR_FEATURE_1_BYTE_PC)) {
+ tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ tcg_gen_qemu_ld_tl(ret, cpu_sp, MMU_DATA_IDX, MO_UB);
+ } else if (avr_feature(ctx->env, AVR_FEATURE_2_BYTE_PC)) {
+ tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ tcg_gen_qemu_ld_tl(ret, cpu_sp, MMU_DATA_IDX, MO_BEUW);
+ tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ } else if (avr_feature(ctx->env, AVR_FEATURE_3_BYTE_PC)) {
+ TCGv lo = tcg_temp_new_i32();
+ TCGv hi = tcg_temp_new_i32();
+
+ tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ tcg_gen_qemu_ld_tl(hi, cpu_sp, MMU_DATA_IDX, MO_BEUW);
+
+ tcg_gen_addi_tl(cpu_sp, cpu_sp, 2);
+ tcg_gen_qemu_ld_tl(lo, cpu_sp, MMU_DATA_IDX, MO_UB);
+
+ tcg_gen_deposit_tl(ret, lo, hi, 8, 16);
+
+ tcg_temp_free_i32(lo);
+ tcg_temp_free_i32(hi);
+ }
+}
+
+static void gen_goto_tb(DisasContext *ctx, int n, target_ulong dest)
+{
+ TranslationBlock *tb = ctx->tb;
+
+ if (ctx->singlestep == 0) {
+ tcg_gen_goto_tb(n);
+ tcg_gen_movi_i32(cpu_pc, dest);
+ tcg_gen_exit_tb(tb, n);
+ } else {
+ tcg_gen_movi_i32(cpu_pc, dest);
+ gen_helper_debug(cpu_env);
+ tcg_gen_exit_tb(NULL, 0);
+ }
+ ctx->bstate = DISAS_NORETURN;
+}
+
+/*
+ * Relative jump to an address within PC - 2K +1 and PC + 2K (words). For
+ * AVR microcontrollers with Program memory not exceeding 4K words (8KB) this
+ * instruction can address the entire memory from every address location. See
+ * also JMP.
+ */
+static bool trans_RJMP(DisasContext *ctx, arg_RJMP *a)
+{
+ int dst = ctx->npc + a->imm;
+
+ gen_goto_tb(ctx, 0, dst);
+
+ return true;
+}
+
+/*
+ * Indirect jump to the address pointed to by the Z (16 bits) Pointer
+ * Register in the Register File. The Z-pointer Register is 16 bits wide and
+ * allows jump within the lowest 64K words (128KB) section of Program memory.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_IJMP(DisasContext *ctx, arg_IJMP *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_IJMP_ICALL)) {
+ return true;
+ }
+
+ gen_jmp_z(ctx);
+
+ return true;
+}
+
+/*
+ * Indirect jump to the address pointed to by the Z (16 bits) Pointer
+ * Register in the Register File and the EIND Register in the I/O space. This
+ * instruction allows for indirect jumps to the entire 4M (words) Program
+ * memory space. See also IJMP. This instruction is not available in all
+ * devices. Refer to the device specific instruction set summary.
+ */
+static bool trans_EIJMP(DisasContext *ctx, arg_EIJMP *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_EIJMP_EICALL)) {
+ return true;
+ }
+
+ gen_jmp_ez(ctx);
+ return true;
+}
+
+/*
+ * Jump to an address within the entire 4M (words) Program memory. See also
+ * RJMP. This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.0
+ */
+static bool trans_JMP(DisasContext *ctx, arg_JMP *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_JMP_CALL)) {
+ return true;
+ }
+
+ gen_goto_tb(ctx, 0, a->imm);
+
+ return true;
+}
+
+/*
+ * Relative call to an address within PC - 2K + 1 and PC + 2K (words). The
+ * return address (the instruction after the RCALL) is stored onto the Stack.
+ * See also CALL. For AVR microcontrollers with Program memory not exceeding 4K
+ * words (8KB) this instruction can address the entire memory from every
+ * address location. The Stack Pointer uses a post-decrement scheme during
+ * RCALL.
+ */
+static bool trans_RCALL(DisasContext *ctx, arg_RCALL *a)
+{
+ int ret = ctx->npc;
+ int dst = ctx->npc + a->imm;
+
+ gen_push_ret(ctx, ret);
+ gen_goto_tb(ctx, 0, dst);
+
+ return true;
+}
+
+/*
+ * Calls to a subroutine within the entire 4M (words) Program memory. The
+ * return address (to the instruction after the CALL) will be stored onto the
+ * Stack. See also RCALL. The Stack Pointer uses a post-decrement scheme during
+ * CALL. This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_ICALL(DisasContext *ctx, arg_ICALL *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_IJMP_ICALL)) {
+ return true;
+ }
+
+ int ret = ctx->npc;
+
+ gen_push_ret(ctx, ret);
+ gen_jmp_z(ctx);
+
+ return true;
+}
+
+/*
+ * Indirect call of a subroutine pointed to by the Z (16 bits) Pointer
+ * Register in the Register File and the EIND Register in the I/O space. This
+ * instruction allows for indirect calls to the entire 4M (words) Program
+ * memory space. See also ICALL. The Stack Pointer uses a post-decrement scheme
+ * during EICALL. This instruction is not available in all devices. Refer to
+ * the device specific instruction set summary.
+ */
+static bool trans_EICALL(DisasContext *ctx, arg_EICALL *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_EIJMP_EICALL)) {
+ return true;
+ }
+
+ int ret = ctx->npc;
+
+ gen_push_ret(ctx, ret);
+ gen_jmp_ez(ctx);
+ return true;
+}
+
+/*
+ * Calls to a subroutine within the entire Program memory. The return
+ * address (to the instruction after the CALL) will be stored onto the Stack.
+ * (See also RCALL). The Stack Pointer uses a post-decrement scheme during
+ * CALL. This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_CALL(DisasContext *ctx, arg_CALL *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_JMP_CALL)) {
+ return true;
+ }
+
+ int Imm = a->imm;
+ int ret = ctx->npc;
+
+ gen_push_ret(ctx, ret);
+ gen_goto_tb(ctx, 0, Imm);
+
+ return true;
+}
+
+/*
+ * Returns from subroutine. The return address is loaded from the STACK.
+ * The Stack Pointer uses a preincrement scheme during RET.
+ */
+static bool trans_RET(DisasContext *ctx, arg_RET *a)
+{
+ gen_pop_ret(ctx, cpu_pc);
+
+ ctx->bstate = DISAS_LOOKUP;
+ return true;
+}
+
+/*
+ * Returns from interrupt. The return address is loaded from the STACK and
+ * the Global Interrupt Flag is set. Note that the Status Register is not
+ * automatically stored when entering an interrupt routine, and it is not
+ * restored when returning from an interrupt routine. This must be handled by
+ * the application program. The Stack Pointer uses a pre-increment scheme
+ * during RETI.
+ */
+static bool trans_RETI(DisasContext *ctx, arg_RETI *a)
+{
+ gen_pop_ret(ctx, cpu_pc);
+ tcg_gen_movi_tl(cpu_If, 1);
+
+ /* Need to return to main loop to re-evaluate interrupts. */
+ ctx->bstate = DISAS_EXIT;
+ return true;
+}
+
+/*
+ * This instruction performs a compare between two registers Rd and Rr, and
+ * skips the next instruction if Rd = Rr.
+ */
+static bool trans_CPSE(DisasContext *ctx, arg_CPSE *a)
+{
+ ctx->skip_cond = TCG_COND_EQ;
+ ctx->skip_var0 = cpu_r[a->rd];
+ ctx->skip_var1 = cpu_r[a->rr];
+ return true;
+}
+
+/*
+ * This instruction performs a compare between two registers Rd and Rr.
+ * None of the registers are changed. All conditional branches can be used
+ * after this instruction.
+ */
+static bool trans_CP(DisasContext *ctx, arg_CP *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs a compare between two registers Rd and Rr and
+ * also takes into account the previous carry. None of the registers are
+ * changed. All conditional branches can be used after this instruction.
+ */
+static bool trans_CPC(DisasContext *ctx, arg_CPC *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+ TCGv R = tcg_temp_new_i32();
+ TCGv zero = tcg_const_i32(0);
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr - Cf */
+ tcg_gen_sub_tl(R, R, cpu_Cf);
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_NSf(R);
+
+ /*
+ * Previous value remains unchanged when the result is zero;
+ * cleared otherwise.
+ */
+ tcg_gen_movcond_tl(TCG_COND_EQ, cpu_Zf, R, zero, cpu_Zf, zero);
+
+ tcg_temp_free_i32(zero);
+ tcg_temp_free_i32(R);
+
+ return true;
+}
+
+/*
+ * This instruction performs a compare between register Rd and a constant.
+ * The register is not changed. All conditional branches can be used after this
+ * instruction.
+ */
+static bool trans_CPI(DisasContext *ctx, arg_CPI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ int Imm = a->imm;
+ TCGv Rr = tcg_const_i32(Imm);
+ TCGv R = tcg_temp_new_i32();
+
+ tcg_gen_sub_tl(R, Rd, Rr); /* R = Rd - Rr */
+ tcg_gen_andi_tl(R, R, 0xff); /* make it 8 bits */
+ /* update status register */
+ gen_sub_CHf(R, Rd, Rr);
+ gen_sub_Vf(R, Rd, Rr);
+ gen_ZNSf(R);
+
+ tcg_temp_free_i32(R);
+ tcg_temp_free_i32(Rr);
+
+ return true;
+}
+
+/*
+ * This instruction tests a single bit in a register and skips the next
+ * instruction if the bit is cleared.
+ */
+static bool trans_SBRC(DisasContext *ctx, arg_SBRC *a)
+{
+ TCGv Rr = cpu_r[a->rr];
+
+ ctx->skip_cond = TCG_COND_EQ;
+ ctx->skip_var0 = tcg_temp_new();
+ ctx->free_skip_var0 = true;
+
+ tcg_gen_andi_tl(ctx->skip_var0, Rr, 1 << a->bit);
+ return true;
+}
+
+/*
+ * This instruction tests a single bit in a register and skips the next
+ * instruction if the bit is set.
+ */
+static bool trans_SBRS(DisasContext *ctx, arg_SBRS *a)
+{
+ TCGv Rr = cpu_r[a->rr];
+
+ ctx->skip_cond = TCG_COND_NE;
+ ctx->skip_var0 = tcg_temp_new();
+ ctx->free_skip_var0 = true;
+
+ tcg_gen_andi_tl(ctx->skip_var0, Rr, 1 << a->bit);
+ return true;
+}
+
+/*
+ * This instruction tests a single bit in an I/O Register and skips the
+ * next instruction if the bit is cleared. This instruction operates on the
+ * lower 32 I/O Registers -- addresses 0-31.
+ */
+static bool trans_SBIC(DisasContext *ctx, arg_SBIC *a)
+{
+ TCGv temp = tcg_const_i32(a->reg);
+
+ gen_helper_inb(temp, cpu_env, temp);
+ tcg_gen_andi_tl(temp, temp, 1 << a->bit);
+ ctx->skip_cond = TCG_COND_EQ;
+ ctx->skip_var0 = temp;
+ ctx->free_skip_var0 = true;
+
+ return true;
+}
+
+/*
+ * This instruction tests a single bit in an I/O Register and skips the
+ * next instruction if the bit is set. This instruction operates on the lower
+ * 32 I/O Registers -- addresses 0-31.
+ */
+static bool trans_SBIS(DisasContext *ctx, arg_SBIS *a)
+{
+ TCGv temp = tcg_const_i32(a->reg);
+
+ gen_helper_inb(temp, cpu_env, temp);
+ tcg_gen_andi_tl(temp, temp, 1 << a->bit);
+ ctx->skip_cond = TCG_COND_NE;
+ ctx->skip_var0 = temp;
+ ctx->free_skip_var0 = true;
+
+ return true;
+}
+
+/*
+ * Conditional relative branch. Tests a single bit in SREG and branches
+ * relatively to PC if the bit is cleared. This instruction branches relatively
+ * to PC in either direction (PC - 63 < = destination <= PC + 64). The
+ * parameter k is the offset from PC and is represented in two's complement
+ * form.
+ */
+static bool trans_BRBC(DisasContext *ctx, arg_BRBC *a)
+{
+ TCGLabel *not_taken = gen_new_label();
+
+ TCGv var;
+
+ switch (a->bit) {
+ case 0x00:
+ var = cpu_Cf;
+ break;
+ case 0x01:
+ var = cpu_Zf;
+ break;
+ case 0x02:
+ var = cpu_Nf;
+ break;
+ case 0x03:
+ var = cpu_Vf;
+ break;
+ case 0x04:
+ var = cpu_Sf;
+ break;
+ case 0x05:
+ var = cpu_Hf;
+ break;
+ case 0x06:
+ var = cpu_Tf;
+ break;
+ case 0x07:
+ var = cpu_If;
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ tcg_gen_brcondi_i32(TCG_COND_NE, var, 0, not_taken);
+ gen_goto_tb(ctx, 0, ctx->npc + a->imm);
+ gen_set_label(not_taken);
+
+ ctx->bstate = DISAS_CHAIN;
+ return true;
+}
+
+/*
+ * Conditional relative branch. Tests a single bit in SREG and branches
+ * relatively to PC if the bit is set. This instruction branches relatively to
+ * PC in either direction (PC - 63 < = destination <= PC + 64). The parameter k
+ * is the offset from PC and is represented in two's complement form.
+ */
+static bool trans_BRBS(DisasContext *ctx, arg_BRBS *a)
+{
+ TCGLabel *not_taken = gen_new_label();
+
+ TCGv var;
+
+ switch (a->bit) {
+ case 0x00:
+ var = cpu_Cf;
+ break;
+ case 0x01:
+ var = cpu_Zf;
+ break;
+ case 0x02:
+ var = cpu_Nf;
+ break;
+ case 0x03:
+ var = cpu_Vf;
+ break;
+ case 0x04:
+ var = cpu_Sf;
+ break;
+ case 0x05:
+ var = cpu_Hf;
+ break;
+ case 0x06:
+ var = cpu_Tf;
+ break;
+ case 0x07:
+ var = cpu_If;
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ tcg_gen_brcondi_i32(TCG_COND_EQ, var, 0, not_taken);
+ gen_goto_tb(ctx, 0, ctx->npc + a->imm);
+ gen_set_label(not_taken);
+
+ ctx->bstate = DISAS_CHAIN;
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 11/29] target/avr: Add instruction translation - Data Transfer Instructions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (9 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 10/29] target/avr: Add instruction translation - Branch Instructions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 12/29] target/avr: Add instruction translation - Bit and Bit-test Instructions Aleksandar Markovic
` (19 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes:
- MOV, MOVW
- LDI, LDS LDX LDY LDZ
- LDDY, LDDZ
- STS, STX STY STZ
- STDY, STDZ
- LPM, LPMX
- ELPM, ELPMX
- SPM, SPMX
- IN, OUT
- PUSH, POP
- XCH
- LAS, LAC LAT
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/insn.decode | 43 +++
target/avr/translate.c | 987 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1030 insertions(+)
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
index 32034c1..3f9304f 100644
--- a/target/avr/insn.decode
+++ b/target/avr/insn.decode
@@ -115,3 +115,46 @@ SBIC 1001 1001 reg:5 bit:3
SBIS 1001 1011 reg:5 bit:3
BRBS 1111 00 ....... ... @op_bit_imm
BRBC 1111 01 ....... ... @op_bit_imm
+
+#
+# Data Transfer Instructions
+#
+MOV 0010 11 . ..... .... @op_rd_rr
+MOVW 0000 0001 .... .... &rd_rr rd=%rd_d rr=%rr_d
+LDI 1110 .... .... .... @op_rd_imm8
+LDS 1001 000 ..... 0000 @ldst_s
+LDX1 1001 000 rd:5 1100
+LDX2 1001 000 rd:5 1101
+LDX3 1001 000 rd:5 1110
+LDY2 1001 000 rd:5 1001
+LDY3 1001 000 rd:5 1010
+LDZ2 1001 000 rd:5 0001
+LDZ3 1001 000 rd:5 0010
+LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d
+LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d
+STS 1001 001 ..... 0000 @ldst_s
+STX1 1001 001 rr:5 1100
+STX2 1001 001 rr:5 1101
+STX3 1001 001 rr:5 1110
+STY2 1001 001 rd:5 1001
+STY3 1001 001 rd:5 1010
+STZ2 1001 001 rd:5 0001
+STZ3 1001 001 rd:5 0010
+STDY 10 . 0 .. 1 ..... 1 ... @ldst_d
+STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d
+LPM1 1001 0101 1100 1000
+LPM2 1001 000 rd:5 0100
+LPMX 1001 000 rd:5 0101
+ELPM1 1001 0101 1101 1000
+ELPM2 1001 000 rd:5 0110
+ELPMX 1001 000 rd:5 0111
+SPM 1001 0101 1110 1000
+SPMX 1001 0101 1111 1000
+IN 1011 0 .. ..... .... @io_rd_imm
+OUT 1011 1 .. ..... .... @io_rd_imm
+PUSH 1001 001 rd:5 1111
+POP 1001 000 rd:5 1111
+XCH 1001 001 rd:5 0100
+LAC 1001 001 rd:5 0110
+LAS 1001 001 rd:5 0101
+LAT 1001 001 rd:5 0111
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 3d40057..4a62d93 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -1453,3 +1453,990 @@ static bool trans_BRBS(DisasContext *ctx, arg_BRBS *a)
ctx->bstate = DISAS_CHAIN;
return true;
}
+
+/*
+ * Data Transfer Instructions
+ */
+
+/*
+ * in the gen_set_addr & gen_get_addr functions
+ * H assumed to be in 0x00ff0000 format
+ * M assumed to be in 0x000000ff format
+ * L assumed to be in 0x000000ff format
+ */
+static void gen_set_addr(TCGv addr, TCGv H, TCGv M, TCGv L)
+{
+
+ tcg_gen_andi_tl(L, addr, 0x000000ff);
+
+ tcg_gen_andi_tl(M, addr, 0x0000ff00);
+ tcg_gen_shri_tl(M, M, 8);
+
+ tcg_gen_andi_tl(H, addr, 0x00ff0000);
+}
+
+static void gen_set_xaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+static void gen_set_yaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+static void gen_set_zaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+static TCGv gen_get_addr(TCGv H, TCGv M, TCGv L)
+{
+ TCGv addr = tcg_temp_new_i32();
+
+ tcg_gen_deposit_tl(addr, M, H, 8, 8);
+ tcg_gen_deposit_tl(addr, L, addr, 8, 16);
+
+ return addr;
+}
+
+static TCGv gen_get_xaddr(void)
+{
+ return gen_get_addr(cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+static TCGv gen_get_yaddr(void)
+{
+ return gen_get_addr(cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+static TCGv gen_get_zaddr(void)
+{
+ return gen_get_addr(cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+/*
+ * Load one byte indirect from data space to register and stores an clear
+ * the bits in data space specified by the register. The instruction can only
+ * be used towards internal SRAM. The data location is pointed to by the Z (16
+ * bits) Pointer Register in the Register File. Memory access is limited to the
+ * current data segment of 64KB. To access another data segment in devices with
+ * more than 64KB data space, the RAMPZ in register in the I/O area has to be
+ * changed. The Z-pointer Register is left unchanged by the operation. This
+ * instruction is especially suited for clearing status bits stored in SRAM.
+ */
+static void gen_data_store(DisasContext *ctx, TCGv data, TCGv addr)
+{
+ if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+ gen_helper_fullwr(cpu_env, data, addr);
+ } else {
+ tcg_gen_qemu_st8(data, addr, MMU_DATA_IDX); /* mem[addr] = data */
+ }
+}
+
+static void gen_data_load(DisasContext *ctx, TCGv data, TCGv addr)
+{
+ if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+ gen_helper_fullrd(data, cpu_env, addr);
+ } else {
+ tcg_gen_qemu_ld8u(data, addr, MMU_DATA_IDX); /* data = mem[addr] */
+ }
+}
+
+/*
+ * This instruction makes a copy of one register into another. The source
+ * register Rr is left unchanged, while the destination register Rd is loaded
+ * with a copy of Rr.
+ */
+static bool trans_MOV(DisasContext *ctx, arg_MOV *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+
+ tcg_gen_mov_tl(Rd, Rr);
+
+ return true;
+}
+
+/*
+ * This instruction makes a copy of one register pair into another register
+ * pair. The source register pair Rr+1:Rr is left unchanged, while the
+ * destination register pair Rd+1:Rd is loaded with a copy of Rr + 1:Rr. This
+ * instruction is not available in all devices. Refer to the device specific
+ * instruction set summary.
+ */
+static bool trans_MOVW(DisasContext *ctx, arg_MOVW *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MOVW)) {
+ return true;
+ }
+
+ TCGv RdL = cpu_r[a->rd];
+ TCGv RdH = cpu_r[a->rd + 1];
+ TCGv RrL = cpu_r[a->rr];
+ TCGv RrH = cpu_r[a->rr + 1];
+
+ tcg_gen_mov_tl(RdH, RrH);
+ tcg_gen_mov_tl(RdL, RrL);
+
+ return true;
+}
+
+/*
+ * Loads an 8 bit constant directly to register 16 to 31.
+ */
+static bool trans_LDI(DisasContext *ctx, arg_LDI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ int imm = a->imm;
+
+ tcg_gen_movi_tl(Rd, imm);
+
+ return true;
+}
+
+/*
+ * Loads one byte from the data space to a register. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the register file only. The EEPROM has a separate address space.
+ * A 16-bit address must be supplied. Memory access is limited to the current
+ * data segment of 64KB. The LDS instruction uses the RAMPD Register to access
+ * memory above 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPD in register in the I/O area has to be changed.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_LDS(DisasContext *ctx, arg_LDS *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_rampD;
+ a->imm = next_word(ctx);
+
+ tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
+ tcg_gen_shli_tl(addr, addr, 16);
+ tcg_gen_ori_tl(addr, addr, a->imm);
+
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect from the data space to a register. For parts
+ * with SRAM, the data space consists of the Register File, I/O memory and
+ * internal SRAM (and external SRAM if applicable). For parts without SRAM, the
+ * data space consists of the Register File only. In some parts the Flash
+ * Memory has been mapped to the data space and can be read using this command.
+ * The EEPROM has a separate address space. The data location is pointed to by
+ * the X (16 bits) Pointer Register in the Register File. Memory access is
+ * limited to the current data segment of 64KB. To access another data segment
+ * in devices with more than 64KB data space, the RAMPX in register in the I/O
+ * area has to be changed. The X-pointer Register can either be left unchanged
+ * by the operation, or it can be post-incremented or predecremented. These
+ * features are especially suited for accessing arrays, tables, and Stack
+ * Pointer usage of the X-pointer Register. Note that only the low byte of the
+ * X-pointer is updated in devices with no more than 256 bytes data space. For
+ * such devices, the high byte of the pointer is not used by this instruction
+ * and can be used for other purposes. The RAMPX Register in the I/O area is
+ * updated in parts with more than 64KB data space or more than 64KB Program
+ * memory, and the increment/decrement is added to the entire 24-bit address on
+ * such devices. Not all variants of this instruction is available in all
+ * devices. Refer to the device specific instruction set summary. In the
+ * Reduced Core tinyAVR the LD instruction can be used to achieve the same
+ * operation as LPM since the program memory is mapped to the data memory
+ * space.
+ */
+static bool trans_LDX1(DisasContext *ctx, arg_LDX1 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDX2(DisasContext *ctx, arg_LDX2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDX3(DisasContext *ctx, arg_LDX3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect with or without displacement from the data space
+ * to a register. For parts with SRAM, the data space consists of the Register
+ * File, I/O memory and internal SRAM (and external SRAM if applicable). For
+ * parts without SRAM, the data space consists of the Register File only. In
+ * some parts the Flash Memory has been mapped to the data space and can be
+ * read using this command. The EEPROM has a separate address space. The data
+ * location is pointed to by the Y (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPY in register in the I/O area has to be changed. The Y-pointer Register
+ * can either be left unchanged by the operation, or it can be post-incremented
+ * or predecremented. These features are especially suited for accessing
+ * arrays, tables, and Stack Pointer usage of the Y-pointer Register. Note that
+ * only the low byte of the Y-pointer is updated in devices with no more than
+ * 256 bytes data space. For such devices, the high byte of the pointer is not
+ * used by this instruction and can be used for other purposes. The RAMPY
+ * Register in the I/O area is updated in parts with more than 64KB data space
+ * or more than 64KB Program memory, and the increment/decrement/displacement
+ * is added to the entire 24-bit address on such devices. Not all variants of
+ * this instruction is available in all devices. Refer to the device specific
+ * instruction set summary. In the Reduced Core tinyAVR the LD instruction can
+ * be used to achieve the same operation as LPM since the program memory is
+ * mapped to the data memory space.
+ */
+static bool trans_LDY2(DisasContext *ctx, arg_LDY2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDY3(DisasContext *ctx, arg_LDY3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDDY(DisasContext *ctx, arg_LDDY *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect with or without displacement from the data space
+ * to a register. For parts with SRAM, the data space consists of the Register
+ * File, I/O memory and internal SRAM (and external SRAM if applicable). For
+ * parts without SRAM, the data space consists of the Register File only. In
+ * some parts the Flash Memory has been mapped to the data space and can be
+ * read using this command. The EEPROM has a separate address space. The data
+ * location is pointed to by the Z (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPZ in register in the I/O area has to be changed. The Z-pointer Register
+ * can either be left unchanged by the operation, or it can be post-incremented
+ * or predecremented. These features are especially suited for Stack Pointer
+ * usage of the Z-pointer Register, however because the Z-pointer Register can
+ * be used for indirect subroutine calls, indirect jumps and table lookup, it
+ * is often more convenient to use the X or Y-pointer as a dedicated Stack
+ * Pointer. Note that only the low byte of the Z-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPZ Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the
+ * increment/decrement/displacement is added to the entire 24-bit address on
+ * such devices. Not all variants of this instruction is available in all
+ * devices. Refer to the device specific instruction set summary. In the
+ * Reduced Core tinyAVR the LD instruction can be used to achieve the same
+ * operation as LPM since the program memory is mapped to the data memory
+ * space. For using the Z-pointer for table lookup in Program memory see the
+ * LPM and ELPM instructions.
+ */
+static bool trans_LDZ2(DisasContext *ctx, arg_LDZ2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDZ3(DisasContext *ctx, arg_LDZ3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDDZ(DisasContext *ctx, arg_LDDZ *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte from a Register to the data space. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the Register File only. The EEPROM has a separate address space.
+ * A 16-bit address must be supplied. Memory access is limited to the current
+ * data segment of 64KB. The STS instruction uses the RAMPD Register to access
+ * memory above 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPD in register in the I/O area has to be changed.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_STS(DisasContext *ctx, arg_STS *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_rampD;
+ a->imm = next_word(ctx);
+
+ tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
+ tcg_gen_shli_tl(addr, addr, 16);
+ tcg_gen_ori_tl(addr, addr, a->imm);
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect from a register to data space. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory, and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the Register File only. The EEPROM has a separate address space.
+ *
+ * The data location is pointed to by the X (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space, the
+ * RAMPX in register in the I/O area has to be changed.
+ *
+ * The X-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the
+ * X-pointer Register. Note that only the low byte of the X-pointer is updated
+ * in devices with no more than 256 bytes data space. For such devices, the high
+ * byte of the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPX Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement is added to the entire 24-bit address on such devices.
+ */
+static bool trans_STX1(DisasContext *ctx, arg_STX1 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STX2(DisasContext *ctx, arg_STX2 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STX3(DisasContext *ctx, arg_STX3 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect with or without displacement from a register to data
+ * space. For parts with SRAM, the data space consists of the Register File, I/O
+ * memory, and internal SRAM (and external SRAM if applicable). For parts
+ * without SRAM, the data space consists of the Register File only. The EEPROM
+ * has a separate address space.
+ *
+ * The data location is pointed to by the Y (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space, the
+ * RAMPY in register in the I/O area has to be changed.
+ *
+ * The Y-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the Y-pointer
+ * Register. Note that only the low byte of the Y-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPY Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement / displacement is added to the entire 24-bit address on such
+ * devices.
+ */
+static bool trans_STY2(DisasContext *ctx, arg_STY2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STY3(DisasContext *ctx, arg_STY3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STDY(DisasContext *ctx, arg_STDY *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect with or without displacement from a register to data
+ * space. For parts with SRAM, the data space consists of the Register File, I/O
+ * memory, and internal SRAM (and external SRAM if applicable). For parts
+ * without SRAM, the data space consists of the Register File only. The EEPROM
+ * has a separate address space.
+ *
+ * The data location is pointed to by the Y (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space, the
+ * RAMPY in register in the I/O area has to be changed.
+ *
+ * The Y-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the Y-pointer
+ * Register. Note that only the low byte of the Y-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPY Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement / displacement is added to the entire 24-bit address on such
+ * devices.
+ */
+static bool trans_STZ2(DisasContext *ctx, arg_STZ2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STZ3(DisasContext *ctx, arg_STZ3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STDZ(DisasContext *ctx, arg_STDZ *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte pointed to by the Z-register into the destination
+ * register Rd. This instruction features a 100% space effective constant
+ * initialization or constant data fetch. The Program memory is organized in
+ * 16-bit words while the Z-pointer is a byte address. Thus, the least
+ * significant bit of the Z-pointer selects either low byte (ZLSB = 0) or high
+ * byte (ZLSB = 1). This instruction can address the first 64KB (32K words) of
+ * Program memory. The Zpointer Register can either be left unchanged by the
+ * operation, or it can be incremented. The incrementation does not apply to
+ * the RAMPZ Register.
+ *
+ * Devices with Self-Programming capability can use the LPM instruction to read
+ * the Fuse and Lock bit values.
+ */
+static bool trans_LPM1(DisasContext *ctx, arg_LPM1 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[0];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LPM2(DisasContext *ctx, arg_LPM2 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LPMX(DisasContext *ctx, arg_LPMX *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPMX)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ tcg_gen_andi_tl(L, addr, 0xff);
+ tcg_gen_shri_tl(addr, addr, 8);
+ tcg_gen_andi_tl(H, addr, 0xff);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+
+/*
+ * Loads one byte pointed to by the Z-register and the RAMPZ Register in
+ * the I/O space, and places this byte in the destination register Rd. This
+ * instruction features a 100% space effective constant initialization or
+ * constant data fetch. The Program memory is organized in 16-bit words while
+ * the Z-pointer is a byte address. Thus, the least significant bit of the
+ * Z-pointer selects either low byte (ZLSB = 0) or high byte (ZLSB = 1). This
+ * instruction can address the entire Program memory space. The Z-pointer
+ * Register can either be left unchanged by the operation, or it can be
+ * incremented. The incrementation applies to the entire 24-bit concatenation
+ * of the RAMPZ and Z-pointer Registers.
+ *
+ * Devices with Self-Programming capability can use the ELPM instruction to
+ * read the Fuse and Lock bit value.
+ */
+static bool trans_ELPM1(DisasContext *ctx, arg_ELPM1 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[0];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_ELPM2(DisasContext *ctx, arg_ELPM2 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_ELPMX(DisasContext *ctx, arg_ELPMX *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPMX)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * SPM can be used to erase a page in the Program memory, to write a page
+ * in the Program memory (that is already erased), and to set Boot Loader Lock
+ * bits. In some devices, the Program memory can be written one word at a time,
+ * in other devices an entire page can be programmed simultaneously after first
+ * filling a temporary page buffer. In all cases, the Program memory must be
+ * erased one page at a time. When erasing the Program memory, the RAMPZ and
+ * Z-register are used as page address. When writing the Program memory, the
+ * RAMPZ and Z-register are used as page or word address, and the R1:R0
+ * register pair is used as data(1). When setting the Boot Loader Lock bits,
+ * the R1:R0 register pair is used as data. Refer to the device documentation
+ * for detailed description of SPM usage. This instruction can address the
+ * entire Program memory.
+ *
+ * The SPM instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ *
+ * Note: 1. R1 determines the instruction high byte, and R0 determines the
+ * instruction low byte.
+ */
+static bool trans_SPM(DisasContext *ctx, arg_SPM *a)
+{
+ /* TODO */
+ if (!avr_have_feature(ctx, AVR_FEATURE_SPM)) {
+ return true;
+ }
+
+ return true;
+}
+
+static bool trans_SPMX(DisasContext *ctx, arg_SPMX *a)
+{
+ /* TODO */
+ if (!avr_have_feature(ctx, AVR_FEATURE_SPMX)) {
+ return true;
+ }
+
+ return true;
+}
+
+/*
+ * Loads data from the I/O Space (Ports, Timers, Configuration Registers,
+ * etc.) into register Rd in the Register File.
+ */
+static bool trans_IN(DisasContext *ctx, arg_IN *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv port = tcg_const_i32(a->imm);
+
+ gen_helper_inb(Rd, cpu_env, port);
+
+ tcg_temp_free_i32(port);
+
+ return true;
+}
+
+/*
+ * Stores data from register Rr in the Register File to I/O Space (Ports,
+ * Timers, Configuration Registers, etc.).
+ */
+static bool trans_OUT(DisasContext *ctx, arg_OUT *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv port = tcg_const_i32(a->imm);
+
+ gen_helper_outb(cpu_env, port, Rd);
+
+ tcg_temp_free_i32(port);
+
+ return true;
+}
+
+/*
+ * This instruction stores the contents of register Rr on the STACK. The
+ * Stack Pointer is post-decremented by 1 after the PUSH. This instruction is
+ * not available in all devices. Refer to the device specific instruction set
+ * summary.
+ */
+static bool trans_PUSH(DisasContext *ctx, arg_PUSH *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ gen_data_store(ctx, Rd, cpu_sp);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+
+ return true;
+}
+
+/*
+ * This instruction loads register Rd with a byte from the STACK. The Stack
+ * Pointer is pre-incremented by 1 before the POP. This instruction is not
+ * available in all devices. Refer to the device specific instruction set
+ * summary.
+ */
+static bool trans_POP(DisasContext *ctx, arg_POP *a)
+{
+ /*
+ * Using a temp to work around some strange behaviour:
+ * tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ * gen_data_load(ctx, Rd, cpu_sp);
+ * seems to cause the add to happen twice.
+ * This doesn't happen if either the add or the load is removed.
+ */
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_addi_tl(t1, cpu_sp, 1);
+ gen_data_load(ctx, Rd, t1);
+ tcg_gen_mov_tl(cpu_sp, t1);
+
+ return true;
+}
+
+/*
+ * Exchanges one byte indirect between register and data space. The data
+ * location is pointed to by the Z (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for writing/reading status bits stored in SRAM.
+ */
+static bool trans_XCH(DisasContext *ctx, arg_XCH *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_load(ctx, t0, addr);
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_mov_tl(Rd, t0);
+
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Load one byte indirect from data space to register and set bits in data
+ * space specified by the register. The instruction can only be used towards
+ * internal SRAM. The data location is pointed to by the Z (16 bits) Pointer
+ * Register in the Register File. Memory access is limited to the current data
+ * segment of 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for setting status bits stored in SRAM.
+ */
+static bool trans_LAS(DisasContext *ctx, arg_LAS *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rr = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_or_tl(t1, t0, Rr);
+ tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Load one byte indirect from data space to register and stores and clear
+ * the bits in data space specified by the register. The instruction can
+ * only be used towards internal SRAM. The data location is pointed to by
+ * the Z (16 bits) Pointer Register in the Register File. Memory access is
+ * limited to the current data segment of 64KB. To access another data
+ * segment in devices with more than 64KB data space, the RAMPZ in register
+ * in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for clearing status bits stored in SRAM.
+ */
+static bool trans_LAC(DisasContext *ctx, arg_LAC *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rr = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_andc_tl(t1, t0, Rr); /* t1 = t0 & (0xff - Rr) = t0 & ~Rr */
+ tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+
+/*
+ * Load one byte indirect from data space to register and toggles bits in
+ * the data space specified by the register. The instruction can only be used
+ * towards SRAM. The data location is pointed to by the Z (16 bits) Pointer
+ * Register in the Register File. Memory access is limited to the current data
+ * segment of 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for changing status bits stored in SRAM.
+ */
+static bool trans_LAT(DisasContext *ctx, arg_LAT *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_xor_tl(t1, t0, Rd);
+ tcg_gen_mov_tl(Rd, t0); /* Rd = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 12/29] target/avr: Add instruction translation - Bit and Bit-test Instructions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (10 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 11/29] target/avr: Add instruction translation - Data Transfer Instructions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 13/29] target/avr: Add instruction translation - MCU Control Instructions Aleksandar Markovic
` (18 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes:
- LSR, ROR
- ASR
- SWAP
- SBI, CBI
- BST, BLD
- BSET, BCLR
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/insn.decode | 14 +++
target/avr/translate.c | 241 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 255 insertions(+)
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
index 3f9304f..4ee5586 100644
--- a/target/avr/insn.decode
+++ b/target/avr/insn.decode
@@ -158,3 +158,17 @@ XCH 1001 001 rd:5 0100
LAC 1001 001 rd:5 0110
LAS 1001 001 rd:5 0101
LAT 1001 001 rd:5 0111
+
+#
+# Bit and Bit-test Instructions
+#
+LSR 1001 010 rd:5 0110
+ROR 1001 010 rd:5 0111
+ASR 1001 010 rd:5 0101
+SWAP 1001 010 rd:5 0010
+SBI 1001 1010 reg:5 bit:3
+CBI 1001 1000 reg:5 bit:3
+BST 1111 101 rd:5 0 bit:3
+BLD 1111 100 rd:5 0 bit:3
+BSET 1001 0100 0 bit:3 1000
+BCLR 1001 0100 1 bit:3 1000
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 4a62d93..58775af 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -2440,3 +2440,244 @@ static bool trans_LAT(DisasContext *ctx, arg_LAT *a)
return true;
}
+
+/*
+ * Bit and Bit-test Instructions
+ */
+static void gen_rshift_ZNVSf(TCGv R)
+{
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
+ tcg_gen_shri_tl(cpu_Nf, R, 7); /* Nf = R(7) */
+ tcg_gen_xor_tl(cpu_Vf, cpu_Nf, cpu_Cf);
+ tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf); /* Sf = Nf ^ Vf */
+}
+
+/*
+ * Shifts all bits in Rd one place to the right. Bit 7 is cleared. Bit 0 is
+ * loaded into the C Flag of the SREG. This operation effectively divides an
+ * unsigned value by two. The C Flag can be used to round the result.
+ */
+static bool trans_LSR(DisasContext *ctx, arg_LSR *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_andi_tl(cpu_Cf, Rd, 1);
+ tcg_gen_shri_tl(Rd, Rd, 1);
+ /* update status register */
+ tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, Rd, 0); /* Zf = Rd == 0 */
+ tcg_gen_movi_tl(cpu_Nf, 0);
+ tcg_gen_mov_tl(cpu_Vf, cpu_Cf);
+ tcg_gen_mov_tl(cpu_Sf, cpu_Vf);
+
+ return true;
+}
+
+/*
+ * Shifts all bits in Rd one place to the right. The C Flag is shifted into
+ * bit 7 of Rd. Bit 0 is shifted into the C Flag. This operation, combined
+ * with ASR, effectively divides multi-byte signed values by two. Combined with
+ * LSR it effectively divides multi-byte unsigned values by two. The Carry Flag
+ * can be used to round the result.
+ */
+static bool trans_ROR(DisasContext *ctx, arg_ROR *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_temp_new_i32();
+
+ tcg_gen_shli_tl(t0, cpu_Cf, 7);
+ /* update status register */
+ tcg_gen_andi_tl(cpu_Cf, Rd, 1);
+ /* update output register */
+ tcg_gen_shri_tl(Rd, Rd, 1);
+ tcg_gen_or_tl(Rd, Rd, t0);
+ /* update status register */
+ gen_rshift_ZNVSf(Rd);
+
+ tcg_temp_free_i32(t0);
+
+ return true;
+}
+
+/*
+ * Shifts all bits in Rd one place to the right. Bit 7 is held constant. Bit 0
+ * is loaded into the C Flag of the SREG. This operation effectively divides a
+ * signed value by two without changing its sign. The Carry Flag can be used to
+ * round the result.
+ */
+static bool trans_ASR(DisasContext *ctx, arg_ASR *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_temp_new_i32();
+
+ /* update status register */
+ tcg_gen_andi_tl(cpu_Cf, Rd, 1); /* Cf = Rd(0) */
+ /* update output register */
+ tcg_gen_andi_tl(t0, Rd, 0x80); /* Rd = (Rd & 0x80) | (Rd >> 1) */
+ tcg_gen_shri_tl(Rd, Rd, 1);
+ tcg_gen_or_tl(Rd, Rd, t0);
+ /* update status register */
+ gen_rshift_ZNVSf(Rd);
+
+ tcg_temp_free_i32(t0);
+
+ return true;
+}
+
+/*
+ * Swaps high and low nibbles in a register.
+ */
+static bool trans_SWAP(DisasContext *ctx, arg_SWAP *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ tcg_gen_andi_tl(t0, Rd, 0x0f);
+ tcg_gen_shli_tl(t0, t0, 4);
+ tcg_gen_andi_tl(t1, Rd, 0xf0);
+ tcg_gen_shri_tl(t1, t1, 4);
+ tcg_gen_or_tl(Rd, t0, t1);
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+
+ return true;
+}
+
+/*
+ * Sets a specified bit in an I/O Register. This instruction operates on
+ * the lower 32 I/O Registers -- addresses 0-31.
+ */
+static bool trans_SBI(DisasContext *ctx, arg_SBI *a)
+{
+ TCGv data = tcg_temp_new_i32();
+ TCGv port = tcg_const_i32(a->reg);
+
+ gen_helper_inb(data, cpu_env, port);
+ tcg_gen_ori_tl(data, data, 1 << a->bit);
+ gen_helper_outb(cpu_env, port, data);
+
+ tcg_temp_free_i32(port);
+ tcg_temp_free_i32(data);
+
+ return true;
+}
+
+/*
+ * Clears a specified bit in an I/O Register. This instruction operates on
+ * the lower 32 I/O Registers -- addresses 0-31.
+ */
+static bool trans_CBI(DisasContext *ctx, arg_CBI *a)
+{
+ TCGv data = tcg_temp_new_i32();
+ TCGv port = tcg_const_i32(a->reg);
+
+ gen_helper_inb(data, cpu_env, port);
+ tcg_gen_andi_tl(data, data, ~(1 << a->bit));
+ gen_helper_outb(cpu_env, port, data);
+
+ tcg_temp_free_i32(data);
+ tcg_temp_free_i32(port);
+
+ return true;
+}
+
+/*
+ * Stores bit b from Rd to the T Flag in SREG (Status Register).
+ */
+static bool trans_BST(DisasContext *ctx, arg_BST *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_andi_tl(cpu_Tf, Rd, 1 << a->bit);
+ tcg_gen_shri_tl(cpu_Tf, cpu_Tf, a->bit);
+
+ return true;
+}
+
+/*
+ * Copies the T Flag in the SREG (Status Register) to bit b in register Rd.
+ */
+static bool trans_BLD(DisasContext *ctx, arg_BLD *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t1 = tcg_temp_new_i32();
+
+ tcg_gen_andi_tl(Rd, Rd, ~(1u << a->bit)); /* clear bit */
+ tcg_gen_shli_tl(t1, cpu_Tf, a->bit); /* create mask */
+ tcg_gen_or_tl(Rd, Rd, t1);
+
+ tcg_temp_free_i32(t1);
+
+ return true;
+}
+
+/*
+ * Sets a single Flag or bit in SREG.
+ */
+static bool trans_BSET(DisasContext *ctx, arg_BSET *a)
+{
+ switch (a->bit) {
+ case 0x00:
+ tcg_gen_movi_tl(cpu_Cf, 0x01);
+ break;
+ case 0x01:
+ tcg_gen_movi_tl(cpu_Zf, 0x01);
+ break;
+ case 0x02:
+ tcg_gen_movi_tl(cpu_Nf, 0x01);
+ break;
+ case 0x03:
+ tcg_gen_movi_tl(cpu_Vf, 0x01);
+ break;
+ case 0x04:
+ tcg_gen_movi_tl(cpu_Sf, 0x01);
+ break;
+ case 0x05:
+ tcg_gen_movi_tl(cpu_Hf, 0x01);
+ break;
+ case 0x06:
+ tcg_gen_movi_tl(cpu_Tf, 0x01);
+ break;
+ case 0x07:
+ tcg_gen_movi_tl(cpu_If, 0x01);
+ break;
+ }
+
+ return true;
+}
+
+/*
+ * Clears a single Flag in SREG.
+ */
+static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a)
+{
+ switch (a->bit) {
+ case 0x00:
+ tcg_gen_movi_tl(cpu_Cf, 0x00);
+ break;
+ case 0x01:
+ tcg_gen_movi_tl(cpu_Zf, 0x00);
+ break;
+ case 0x02:
+ tcg_gen_movi_tl(cpu_Nf, 0x00);
+ break;
+ case 0x03:
+ tcg_gen_movi_tl(cpu_Vf, 0x00);
+ break;
+ case 0x04:
+ tcg_gen_movi_tl(cpu_Sf, 0x00);
+ break;
+ case 0x05:
+ tcg_gen_movi_tl(cpu_Hf, 0x00);
+ break;
+ case 0x06:
+ tcg_gen_movi_tl(cpu_Tf, 0x00);
+ break;
+ case 0x07:
+ tcg_gen_movi_tl(cpu_If, 0x00);
+ break;
+ }
+
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 13/29] target/avr: Add instruction translation - MCU Control Instructions
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (11 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 12/29] target/avr: Add instruction translation - Bit and Bit-test Instructions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 14/29] target/avr: Add instruction translation - CPU main translation function Aleksandar Markovic
` (17 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This includes:
- BREAK
- NOP
- SLEEP
- WDR
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/insn.decode | 8 ++++++
target/avr/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+)
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
index 4ee5586..f8d32f2 100644
--- a/target/avr/insn.decode
+++ b/target/avr/insn.decode
@@ -172,3 +172,11 @@ BST 1111 101 rd:5 0 bit:3
BLD 1111 100 rd:5 0 bit:3
BSET 1001 0100 0 bit:3 1000
BCLR 1001 0100 1 bit:3 1000
+
+#
+# MCU Control Instructions
+#
+BREAK 1001 0101 1001 1000
+NOP 0000 0000 0000 0000
+SLEEP 1001 0101 1000 1000
+WDR 1001 0101 1010 1000
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 58775af..4c68007 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -2681,3 +2681,71 @@ static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a)
return true;
}
+
+/*
+ * MCU Control Instructions
+ */
+
+/*
+ * The BREAK instruction is used by the On-chip Debug system, and is
+ * normally not used in the application software. When the BREAK instruction is
+ * executed, the AVR CPU is set in the Stopped Mode. This gives the On-chip
+ * Debugger access to internal resources. If any Lock bits are set, or either
+ * the JTAGEN or OCDEN Fuses are unprogrammed, the CPU will treat the BREAK
+ * instruction as a NOP and will not enter the Stopped mode. This instruction
+ * is not available in all devices. Refer to the device specific instruction
+ * set summary.
+ */
+static bool trans_BREAK(DisasContext *ctx, arg_BREAK *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_BREAK)) {
+ return true;
+ }
+
+#ifdef BREAKPOINT_ON_BREAK
+ tcg_gen_movi_tl(cpu_pc, ctx->npc - 1);
+ gen_helper_debug(cpu_env);
+ ctx->bstate = DISAS_EXIT;
+#else
+ /* NOP */
+#endif
+
+ return true;
+}
+
+
+/*
+ * This instruction performs a single cycle No Operation.
+ */
+static bool trans_NOP(DisasContext *ctx, arg_NOP *a)
+{
+
+ /* NOP */
+
+ return true;
+}
+
+
+/*
+ * This instruction sets the circuit in sleep mode defined by the MCU
+ * Control Register.
+ */
+static bool trans_SLEEP(DisasContext *ctx, arg_SLEEP *a)
+{
+ gen_helper_sleep(cpu_env);
+ ctx->bstate = DISAS_NORETURN;
+ return true;
+}
+
+
+/*
+ * This instruction resets the Watchdog Timer. This instruction must be
+ * executed within a limited time given by the WD prescaler. See the Watchdog
+ * Timer hardware specification.
+ */
+static bool trans_WDR(DisasContext *ctx, arg_WDR *a)
+{
+ gen_helper_wdr(cpu_env);
+
+ return true;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 14/29] target/avr: Add instruction translation - CPU main translation function
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (12 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 13/29] target/avr: Add instruction translation - MCU Control Instructions Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:02 ` [PATCH rc4 15/29] target/avr: Add instruction disassembly function Aleksandar Markovic
` (16 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/translate.c | 234 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 234 insertions(+)
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 4c68007..af88bb2 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -2749,3 +2749,237 @@ static bool trans_WDR(DisasContext *ctx, arg_WDR *a)
return true;
}
+
+
+void avr_cpu_tcg_init(void)
+{
+ int i;
+
+#define AVR_REG_OFFS(x) offsetof(CPUAVRState, x)
+ cpu_pc = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(pc_w), "pc");
+ cpu_Cf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregC), "Cf");
+ cpu_Zf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregZ), "Zf");
+ cpu_Nf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregN), "Nf");
+ cpu_Vf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregV), "Vf");
+ cpu_Sf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregS), "Sf");
+ cpu_Hf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregH), "Hf");
+ cpu_Tf = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregT), "Tf");
+ cpu_If = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sregI), "If");
+ cpu_rampD = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(rampD), "rampD");
+ cpu_rampX = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(rampX), "rampX");
+ cpu_rampY = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(rampY), "rampY");
+ cpu_rampZ = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(rampZ), "rampZ");
+ cpu_eind = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(eind), "eind");
+ cpu_sp = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(sp), "sp");
+ cpu_skip = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(skip), "skip");
+
+ for (i = 0; i < NUMBER_OF_CPU_REGISTERS; i++) {
+ cpu_r[i] = tcg_global_mem_new_i32(cpu_env, AVR_REG_OFFS(r[i]),
+ reg_names[i]);
+ }
+#undef AVR_REG_OFFS
+}
+
+static void translate(DisasContext *ctx)
+{
+ uint32_t opcode = next_word(ctx);
+
+ if (!decode_insn(ctx, opcode)) {
+ gen_helper_unsupported(cpu_env);
+ ctx->bstate = DISAS_NORETURN;
+ }
+}
+
+/* Standardize the cpu_skip condition to NE. */
+static bool canonicalize_skip(DisasContext *ctx)
+{
+ switch (ctx->skip_cond) {
+ case TCG_COND_NEVER:
+ /* Normal case: cpu_skip is known to be false. */
+ return false;
+
+ case TCG_COND_ALWAYS:
+ /*
+ * Breakpoint case: cpu_skip is known to be true, via TB_FLAGS_SKIP.
+ * The breakpoint is on the instruction being skipped, at the start
+ * of the TranslationBlock. No need to update.
+ */
+ return false;
+
+ case TCG_COND_NE:
+ if (ctx->skip_var1 == NULL) {
+ tcg_gen_mov_tl(cpu_skip, ctx->skip_var0);
+ } else {
+ tcg_gen_xor_tl(cpu_skip, ctx->skip_var0, ctx->skip_var1);
+ ctx->skip_var1 = NULL;
+ }
+ break;
+
+ default:
+ /* Convert to a NE condition vs 0. */
+ if (ctx->skip_var1 == NULL) {
+ tcg_gen_setcondi_tl(ctx->skip_cond, cpu_skip, ctx->skip_var0, 0);
+ } else {
+ tcg_gen_setcond_tl(ctx->skip_cond, cpu_skip,
+ ctx->skip_var0, ctx->skip_var1);
+ ctx->skip_var1 = NULL;
+ }
+ ctx->skip_cond = TCG_COND_NE;
+ break;
+ }
+ if (ctx->free_skip_var0) {
+ tcg_temp_free(ctx->skip_var0);
+ ctx->free_skip_var0 = false;
+ }
+ ctx->skip_var0 = cpu_skip;
+ return true;
+}
+
+void gen_intermediate_code(CPUState *cs, TranslationBlock *tb, int max_insns)
+{
+ CPUAVRState *env = cs->env_ptr;
+ DisasContext ctx = {
+ .tb = tb,
+ .cs = cs,
+ .env = env,
+ .memidx = 0,
+ .bstate = DISAS_NEXT,
+ .skip_cond = TCG_COND_NEVER,
+ .singlestep = cs->singlestep_enabled,
+ };
+ target_ulong pc_start = tb->pc / 2;
+ int num_insns = 0;
+
+ if (tb->flags & TB_FLAGS_FULL_ACCESS) {
+ /*
+ * This flag is set by ST/LD instruction we will regenerate it ONLY
+ * with mem/cpu memory access instead of mem access
+ */
+ max_insns = 1;
+ }
+ if (ctx.singlestep) {
+ max_insns = 1;
+ }
+
+ gen_tb_start(tb);
+
+ ctx.npc = pc_start;
+ if (tb->flags & TB_FLAGS_SKIP) {
+ ctx.skip_cond = TCG_COND_ALWAYS;
+ ctx.skip_var0 = cpu_skip;
+ }
+
+ do {
+ TCGLabel *skip_label = NULL;
+
+ /* translate current instruction */
+ tcg_gen_insn_start(ctx.npc);
+ num_insns++;
+
+ /*
+ * this is due to some strange GDB behavior
+ * let's assume main has address 0x100
+ * b main - sets breakpoint at address 0x00000100 (code)
+ * b *0x100 - sets breakpoint at address 0x00800100 (data)
+ */
+ if (unlikely(!ctx.singlestep &&
+ (cpu_breakpoint_test(cs, OFFSET_CODE + ctx.npc * 2, BP_ANY) ||
+ cpu_breakpoint_test(cs, OFFSET_DATA + ctx.npc * 2, BP_ANY)))) {
+ canonicalize_skip(&ctx);
+ tcg_gen_movi_tl(cpu_pc, ctx.npc);
+ gen_helper_debug(cpu_env);
+ goto done_generating;
+ }
+
+ /* Conditionally skip the next instruction, if indicated. */
+ if (ctx.skip_cond != TCG_COND_NEVER) {
+ skip_label = gen_new_label();
+ if (ctx.skip_var0 == cpu_skip) {
+ /*
+ * Copy cpu_skip so that we may zero it before the branch.
+ * This ensures that cpu_skip is non-zero after the label
+ * if and only if the skipped insn itself sets a skip.
+ */
+ ctx.free_skip_var0 = true;
+ ctx.skip_var0 = tcg_temp_new();
+ tcg_gen_mov_tl(ctx.skip_var0, cpu_skip);
+ tcg_gen_movi_tl(cpu_skip, 0);
+ }
+ if (ctx.skip_var1 == NULL) {
+ tcg_gen_brcondi_tl(ctx.skip_cond, ctx.skip_var0, 0, skip_label);
+ } else {
+ tcg_gen_brcond_tl(ctx.skip_cond, ctx.skip_var0,
+ ctx.skip_var1, skip_label);
+ ctx.skip_var1 = NULL;
+ }
+ if (ctx.free_skip_var0) {
+ tcg_temp_free(ctx.skip_var0);
+ ctx.free_skip_var0 = false;
+ }
+ ctx.skip_cond = TCG_COND_NEVER;
+ ctx.skip_var0 = NULL;
+ }
+
+ translate(&ctx);
+
+ if (skip_label) {
+ canonicalize_skip(&ctx);
+ gen_set_label(skip_label);
+ if (ctx.bstate == DISAS_NORETURN) {
+ ctx.bstate = DISAS_CHAIN;
+ }
+ }
+ } while (ctx.bstate == DISAS_NEXT
+ && num_insns < max_insns
+ && (ctx.npc - pc_start) * 2 < TARGET_PAGE_SIZE - 4
+ && !tcg_op_buf_full());
+
+ if (tb->cflags & CF_LAST_IO) {
+ gen_io_end();
+ }
+
+ bool nonconst_skip = canonicalize_skip(&ctx);
+
+ switch (ctx.bstate) {
+ case DISAS_NORETURN:
+ assert(!nonconst_skip);
+ break;
+ case DISAS_NEXT:
+ case DISAS_TOO_MANY:
+ case DISAS_CHAIN:
+ if (!nonconst_skip) {
+ /* Note gen_goto_tb checks singlestep. */
+ gen_goto_tb(&ctx, 1, ctx.npc);
+ break;
+ }
+ tcg_gen_movi_tl(cpu_pc, ctx.npc);
+ /* fall through */
+ case DISAS_LOOKUP:
+ if (!ctx.singlestep) {
+ tcg_gen_lookup_and_goto_ptr();
+ break;
+ }
+ /* fall through */
+ case DISAS_EXIT:
+ if (ctx.singlestep) {
+ gen_helper_debug(cpu_env);
+ } else {
+ tcg_gen_exit_tb(NULL, 0);
+ }
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+done_generating:
+ gen_tb_end(tb, num_insns);
+
+ tb->size = (ctx.npc - pc_start) * 2;
+ tb->icount = num_insns;
+}
+
+void restore_state_to_opc(CPUAVRState *env, TranslationBlock *tb,
+ target_ulong *data)
+{
+ env->pc_w = data[0];
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 15/29] target/avr: Add instruction disassembly function
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (13 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 14/29] target/avr: Add instruction translation - CPU main translation function Aleksandar Markovic
@ 2020-01-31 0:02 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 16/29] hw/char: Add limited support for AVR USART peripheral Aleksandar Markovic
` (15 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:02 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Provide function disassembles executed instruction when `-d in_asm` is
provided
Example:
`./avr-softmmu/qemu-system-avr -bios free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf -d in_asm` will produce something like the following
```
...
IN:
0x0000014a: CALL 0x3808
IN: main
0x00003808: CALL 0x4b4
IN: vParTestInitialise
0x000004b4: LDI r24, 255
0x000004b6: STS r24, 0
0x000004b8: MULS r16, r20
0x000004ba: OUT $1, r24
0x000004bc: LDS r24, 0
0x000004be: MULS r16, r20
0x000004c0: OUT $2, r24
0x000004c2: RET
...
```
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[rth: Fix spacing and const mnemonic arrays]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
target/avr/cpu.c | 2 +-
target/avr/cpu.h | 1 +
target/avr/disas.c | 246 +++++++++++++++++++++++++++++++++++++++++++++++++
target/avr/translate.c | 12 +++
4 files changed, 260 insertions(+), 1 deletion(-)
create mode 100644 target/avr/disas.c
diff --git a/target/avr/cpu.c b/target/avr/cpu.c
index e0ae055..930dd10 100644
--- a/target/avr/cpu.c
+++ b/target/avr/cpu.c
@@ -84,7 +84,7 @@ static void avr_cpu_reset(CPUState *cs)
static void avr_cpu_disas_set_info(CPUState *cpu, disassemble_info *info)
{
info->mach = bfd_arch_avr;
- info->print_insn = NULL;
+ info->print_insn = avr_print_insn;
}
static void avr_cpu_realizefn(DeviceState *dev, Error **errp)
diff --git a/target/avr/cpu.h b/target/avr/cpu.h
index e94dab3..4169add 100644
--- a/target/avr/cpu.h
+++ b/target/avr/cpu.h
@@ -162,6 +162,7 @@ bool avr_cpu_exec_interrupt(CPUState *cpu, int int_req);
hwaddr avr_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
int avr_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
int avr_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+int avr_print_insn(bfd_vma addr, disassemble_info *info);
static inline int avr_feature(CPUAVRState *env, AVRFeature feature)
{
diff --git a/target/avr/disas.c b/target/avr/disas.c
new file mode 100644
index 0000000..23bd991
--- /dev/null
+++ b/target/avr/disas.c
@@ -0,0 +1,246 @@
+/*
+ * AVR disassembler
+ *
+ * Copyright (c) 2019 Richard Henderson <rth@twiddle.net>
+ * Copyright (c) 2019 Michael Rolnik <mrolnik@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+
+typedef struct {
+ disassemble_info *info;
+ uint16_t next_word;
+ bool next_word_used;
+} DisasContext;
+
+static int to_regs_16_31_by_one(DisasContext *ctx, int indx)
+{
+ return 16 + (indx % 16);
+}
+
+static int to_regs_16_23_by_one(DisasContext *ctx, int indx)
+{
+ return 16 + (indx % 8);
+}
+
+static int to_regs_24_30_by_two(DisasContext *ctx, int indx)
+{
+ return 24 + (indx % 4) * 2;
+}
+
+static int to_regs_00_30_by_two(DisasContext *ctx, int indx)
+{
+ return (indx % 16) * 2;
+}
+
+static uint16_t next_word(DisasContext *ctx)
+{
+ ctx->next_word_used = true;
+ return ctx->next_word;
+}
+
+static int append_16(DisasContext *ctx, int x)
+{
+ return x << 16 | next_word(ctx);
+}
+
+
+/* Include the auto-generated decoder. */
+static bool decode_insn(DisasContext *ctx, uint16_t insn);
+#include "decode_insn.inc.c"
+
+#define output(mnemonic, format, ...) \
+ (pctx->info->fprintf_func(pctx->info->stream, "%-9s " format, \
+ mnemonic, ##__VA_ARGS__))
+
+int avr_print_insn(bfd_vma addr, disassemble_info *info)
+{
+ DisasContext ctx;
+ DisasContext *pctx = &ctx;
+ bfd_byte buffer[4];
+ uint16_t insn;
+ int status;
+
+ ctx.info = info;
+
+ status = info->read_memory_func(addr, buffer, 4, info);
+ if (status != 0) {
+ info->memory_error_func(status, addr, info);
+ return -1;
+ }
+ insn = bfd_getl16(buffer);
+ ctx.next_word = bfd_getl16(buffer + 2);
+ ctx.next_word_used = false;
+
+ if (!decode_insn(&ctx, insn)) {
+ output(".db", "0x%02x, 0x%02x", buffer[0], buffer[1]);
+ }
+
+ return ctx.next_word_used ? 4 : 2;
+}
+
+
+#define INSN(opcode, format, ...) \
+static bool trans_##opcode(DisasContext *pctx, arg_##opcode * a) \
+{ \
+ output(#opcode, format, ##__VA_ARGS__); \
+ return true; \
+}
+
+#define INSN_MNEMONIC(opcode, mnemonic, format, ...) \
+static bool trans_##opcode(DisasContext *pctx, arg_##opcode * a) \
+{ \
+ output(mnemonic, format, ##__VA_ARGS__); \
+ return true; \
+}
+
+/*
+ * C Z N V S H T I
+ * 0 1 2 3 4 5 6 7
+ */
+static const char brbc[][5] = {
+ "BRCC", "BRNE", "BRPL", "BRVC", "BRGE", "BRHC", "BRTC", "BRID"
+};
+
+static const char brbs[][5] = {
+ "BRCS", "BREQ", "BRMI", "BRVS", "BRLT", "BRHS", "BRTS", "BRIE"
+};
+
+static const char bset[][4] = {
+ "SEC", "SEZ", "SEN", "SEZ", "SES", "SEH", "SET", "SEI"
+};
+
+static const char bclr[][4] = {
+ "CLC", "CLZ", "CLN", "CLZ", "CLS", "CLH", "CLT", "CLI"
+};
+
+/*
+ * Arithmetic Instructions
+ */
+INSN(ADD, "r%d, r%d", a->rd, a->rr)
+INSN(ADC, "r%d, r%d", a->rd, a->rr)
+INSN(ADIW, "r%d:r%d, %d", a->rd + 1, a->rd, a->imm)
+INSN(SUB, "r%d, r%d", a->rd, a->rr)
+INSN(SUBI, "r%d, %d", a->rd, a->imm)
+INSN(SBC, "r%d, r%d", a->rd, a->rr)
+INSN(SBCI, "r%d, %d", a->rd, a->imm)
+INSN(SBIW, "r%d:r%d, %d", a->rd + 1, a->rd, a->imm)
+INSN(AND, "r%d, r%d", a->rd, a->rr)
+INSN(ANDI, "r%d, %d", a->rd, a->imm)
+INSN(OR, "r%d, r%d", a->rd, a->rr)
+INSN(ORI, "r%d, %d", a->rd, a->imm)
+INSN(EOR, "r%d, r%d", a->rd, a->rr)
+INSN(COM, "r%d", a->rd)
+INSN(NEG, "r%d", a->rd)
+INSN(INC, "r%d", a->rd)
+INSN(DEC, "r%d", a->rd)
+INSN(MUL, "r%d, r%d", a->rd, a->rr)
+INSN(MULS, "r%d, r%d", a->rd, a->rr)
+INSN(MULSU, "r%d, r%d", a->rd, a->rr)
+INSN(FMUL, "r%d, r%d", a->rd, a->rr)
+INSN(FMULS, "r%d, r%d", a->rd, a->rr)
+INSN(FMULSU, "r%d, r%d", a->rd, a->rr)
+INSN(DES, "%d", a->imm)
+
+/*
+ * Branch Instructions
+ */
+INSN(RJMP, ".%+d", a->imm * 2)
+INSN(IJMP, "")
+INSN(EIJMP, "")
+INSN(JMP, "0x%x", a->imm * 2)
+INSN(RCALL, ".%+d", a->imm * 2)
+INSN(ICALL, "")
+INSN(EICALL, "")
+INSN(CALL, "0x%x", a->imm * 2)
+INSN(RET, "")
+INSN(RETI, "")
+INSN(CPSE, "r%d, r%d", a->rd, a->rr)
+INSN(CP, "r%d, r%d", a->rd, a->rr)
+INSN(CPC, "r%d, r%d", a->rd, a->rr)
+INSN(CPI, "r%d, %d", a->rd, a->imm)
+INSN(SBRC, "r%d, %d", a->rr, a->bit)
+INSN(SBRS, "r%d, %d", a->rr, a->bit)
+INSN(SBIC, "$%d, %d", a->reg, a->bit)
+INSN(SBIS, "$%d, %d", a->reg, a->bit)
+INSN_MNEMONIC(BRBS, brbs[a->bit], ".%+d", a->imm * 2)
+INSN_MNEMONIC(BRBC, brbc[a->bit], ".%+d", a->imm * 2)
+
+/*
+ * Data Transfer Instructions
+ */
+INSN(MOV, "r%d, r%d", a->rd, a->rr)
+INSN(MOVW, "r%d:r%d, r%d:r%d", a->rd + 1, a->rd, a->rr + 1, a->rr)
+INSN(LDI, "r%d, %d", a->rd, a->imm)
+INSN(LDS, "r%d, %d", a->rd, a->imm)
+INSN(LDX1, "r%d, X", a->rd)
+INSN(LDX2, "r%d, X+", a->rd)
+INSN(LDX3, "r%d, -X", a->rd)
+INSN(LDY2, "r%d, Y+", a->rd)
+INSN(LDY3, "r%d, -Y", a->rd)
+INSN(LDZ2, "r%d, Z+", a->rd)
+INSN(LDZ3, "r%d, -Z", a->rd)
+INSN(LDDY, "r%d, Y+%d", a->rd, a->imm)
+INSN(LDDZ, "r%d, Z+%d", a->rd, a->imm)
+INSN(STS, "r%d, %d", a->rd, a->imm)
+INSN(STX1, "r%d, X", a->rr)
+INSN(STX2, "r%d, X+", a->rr)
+INSN(STX3, "r%d, -X", a->rr)
+INSN(STY2, "r%d, Y+", a->rd)
+INSN(STY3, "r%d, -Y", a->rd)
+INSN(STZ2, "r%d, Z+", a->rd)
+INSN(STZ3, "r%d, -Z", a->rd)
+INSN(STDY, "r%d, Y+%d", a->rd, a->imm)
+INSN(STDZ, "r%d, Z+%d", a->rd, a->imm)
+INSN(LPM1, "")
+INSN(LPM2, "r%d, Z", a->rd)
+INSN(LPMX, "r%d, Z+", a->rd)
+INSN(ELPM1, "")
+INSN(ELPM2, "r%d, Z", a->rd)
+INSN(ELPMX, "r%d, Z+", a->rd)
+INSN(SPM, "")
+INSN(SPMX, "Z+")
+INSN(IN, "r%d, $%d", a->rd, a->imm)
+INSN(OUT, "$%d, r%d", a->imm, a->rd)
+INSN(PUSH, "r%d", a->rd)
+INSN(POP, "r%d", a->rd)
+INSN(XCH, "Z, r%d", a->rd)
+INSN(LAC, "Z, r%d", a->rd)
+INSN(LAS, "Z, r%d", a->rd)
+INSN(LAT, "Z, r%d", a->rd)
+
+/*
+ * Bit and Bit-test Instructions
+ */
+INSN(LSR, "r%d", a->rd)
+INSN(ROR, "r%d", a->rd)
+INSN(ASR, "r%d", a->rd)
+INSN(SWAP, "r%d", a->rd)
+INSN(SBI, "$%d, %d", a->reg, a->bit)
+INSN(CBI, "%d, %d", a->reg, a->bit)
+INSN(BST, "r%d, %d", a->rd, a->bit)
+INSN(BLD, "r%d, %d", a->rd, a->bit)
+INSN_MNEMONIC(BSET, bset[a->bit], "")
+INSN_MNEMONIC(BCLR, bclr[a->bit], "")
+
+/*
+ * MCU Control Instructions
+ */
+INSN(BREAK, "")
+INSN(NOP, "")
+INSN(SLEEP, "")
+INSN(WDR, "")
diff --git a/target/avr/translate.c b/target/avr/translate.c
index af88bb2..064eee0 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -2976,6 +2976,18 @@ done_generating:
tb->size = (ctx.npc - pc_start) * 2;
tb->icount = num_insns;
+
+#ifdef DEBUG_DISAS
+ if (qemu_loglevel_mask(CPU_LOG_TB_IN_ASM)
+ && qemu_log_in_addr_range(tb->pc)) {
+ FILE *fd;
+ fd = qemu_log_lock();
+ qemu_log("IN: %s\n", lookup_symbol(tb->pc));
+ log_target_disas(cs, tb->pc, tb->size);
+ qemu_log("\n");
+ qemu_log_unlock(fd);
+ }
+#endif
}
void restore_state_to_opc(CPUAVRState *env, TranslationBlock *tb,
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 16/29] hw/char: Add limited support for AVR USART peripheral
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (14 preceding siblings ...)
2020-01-31 0:02 ` [PATCH rc4 15/29] target/avr: Add instruction disassembly function Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 17/29] hw/timer: Add limited support for AVR 16-bit timer peripheral Aleksandar Markovic
` (14 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Sarah Harris, Michael Rolnik,
Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash I/O size fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
hw/char/Kconfig | 3 +
hw/char/Makefile.objs | 1 +
hw/char/avr_usart.c | 320 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/char/avr_usart.h | 93 +++++++++++++
4 files changed, 417 insertions(+)
create mode 100644 hw/char/avr_usart.c
create mode 100644 include/hw/char/avr_usart.h
diff --git a/hw/char/Kconfig b/hw/char/Kconfig
index 40e7a8b..331b209 100644
--- a/hw/char/Kconfig
+++ b/hw/char/Kconfig
@@ -46,3 +46,6 @@ config SCLPCONSOLE
config TERMINAL3270
bool
+
+config AVR_USART
+ bool
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 02d8a66..f05c1f5 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -21,6 +21,7 @@ obj-$(CONFIG_PSERIES) += spapr_vty.o
obj-$(CONFIG_DIGIC) += digic-uart.o
obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
obj-$(CONFIG_RASPI) += bcm2835_aux.o
+common-obj-$(CONFIG_AVR_USART) += avr_usart.o
common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
diff --git a/hw/char/avr_usart.c b/hw/char/avr_usart.c
new file mode 100644
index 0000000..fbe2a11
--- /dev/null
+++ b/hw/char/avr_usart.c
@@ -0,0 +1,320 @@
+/*
+ * AVR USART
+ *
+ * Copyright (c) 2018 University of Kent
+ * Author: Sarah Harris
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#include "qemu/osdep.h"
+#include "hw/char/avr_usart.h"
+#include "qemu/log.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+
+static int avr_usart_can_receive(void *opaque)
+{
+ AVRUsartState *usart = opaque;
+
+ if (usart->data_valid || !(usart->csrb & USART_CSRB_RXEN)) {
+ return 0;
+ }
+ return 1;
+}
+
+static void avr_usart_receive(void *opaque, const uint8_t *buffer, int size)
+{
+ AVRUsartState *usart = opaque;
+ assert(size == 1);
+ assert(!usart->data_valid);
+ usart->data = buffer[0];
+ usart->data_valid = true;
+ usart->csra |= USART_CSRA_RXC;
+ if (usart->csrb & USART_CSRB_RXCIE) {
+ qemu_set_irq(usart->rxc_irq, 1);
+ }
+}
+
+static void update_char_mask(AVRUsartState *usart)
+{
+ uint8_t mode = ((usart->csrc & USART_CSRC_CSZ0) ? 1 : 0) |
+ ((usart->csrc & USART_CSRC_CSZ1) ? 2 : 0) |
+ ((usart->csrb & USART_CSRB_CSZ2) ? 4 : 0);
+ switch (mode) {
+ case 0:
+ usart->char_mask = 0b11111;
+ break;
+ case 1:
+ usart->char_mask = 0b111111;
+ break;
+ case 2:
+ usart->char_mask = 0b1111111;
+ break;
+ case 3:
+ usart->char_mask = 0b11111111;
+ break;
+ case 4:
+ /* Fallthrough. */
+ case 5:
+ /* Fallthrough. */
+ case 6:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: Reserved character size 0x%x\n",
+ __func__,
+ mode);
+ break;
+ case 7:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: Nine bit character size not supported (forcing eight)\n",
+ __func__);
+ usart->char_mask = 0b11111111;
+ break;
+ default:
+ assert(0);
+ }
+}
+
+static void avr_usart_reset(DeviceState *dev)
+{
+ AVRUsartState *usart = AVR_USART(dev);
+ usart->data_valid = false;
+ usart->csra = 0b00100000;
+ usart->csrb = 0b00000000;
+ usart->csrc = 0b00000110;
+ usart->brrl = 0;
+ usart->brrh = 0;
+ update_char_mask(usart);
+ qemu_set_irq(usart->rxc_irq, 0);
+ qemu_set_irq(usart->txc_irq, 0);
+ qemu_set_irq(usart->dre_irq, 0);
+}
+
+static uint64_t avr_usart_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ AVRUsartState *usart = opaque;
+ uint8_t data;
+ assert(size == 1);
+
+ if (!usart->enabled) {
+ return 0;
+ }
+
+ switch (addr) {
+ case USART_DR:
+ if (!(usart->csrb & USART_CSRB_RXEN)) {
+ /* Receiver disabled, ignore. */
+ return 0;
+ }
+ if (usart->data_valid) {
+ data = usart->data & usart->char_mask;
+ usart->data_valid = false;
+ } else {
+ data = 0;
+ }
+ usart->csra &= 0xff ^ USART_CSRA_RXC;
+ qemu_set_irq(usart->rxc_irq, 0);
+ qemu_chr_fe_accept_input(&usart->chr);
+ return data;
+ case USART_CSRA:
+ return usart->csra;
+ case USART_CSRB:
+ return usart->csrb;
+ case USART_CSRC:
+ return usart->csrc;
+ case USART_BRRL:
+ return usart->brrl;
+ case USART_BRRH:
+ return usart->brrh;
+ default:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n",
+ __func__,
+ addr);
+ }
+ return 0;
+}
+
+static void avr_usart_write(void *opaque, hwaddr addr, uint64_t value,
+ unsigned int size)
+{
+ AVRUsartState *usart = opaque;
+ uint8_t mask;
+ uint8_t data;
+ assert((value & 0xff) == value);
+ assert(size == 1);
+
+ if (!usart->enabled) {
+ return;
+ }
+
+ switch (addr) {
+ case USART_DR:
+ if (!(usart->csrb & USART_CSRB_TXEN)) {
+ /* Transmitter disabled, ignore. */
+ return;
+ }
+ usart->csra |= USART_CSRA_TXC;
+ usart->csra |= USART_CSRA_DRE;
+ if (usart->csrb & USART_CSRB_TXCIE) {
+ qemu_set_irq(usart->txc_irq, 1);
+ usart->csra &= 0xff ^ USART_CSRA_TXC;
+ }
+ if (usart->csrb & USART_CSRB_DREIE) {
+ qemu_set_irq(usart->dre_irq, 1);
+ }
+ data = value;
+ qemu_chr_fe_write_all(&usart->chr, &data, 1);
+ break;
+ case USART_CSRA:
+ mask = 0b01000011;
+ /* Mask read-only bits. */
+ value = (value & mask) | (usart->csra & (0xff ^ mask));
+ usart->csra = value;
+ if (value & USART_CSRA_TXC) {
+ usart->csra ^= USART_CSRA_TXC;
+ qemu_set_irq(usart->txc_irq, 0);
+ }
+ if (value & USART_CSRA_MPCM) {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: MPCM not supported by USART\n",
+ __func__);
+ }
+ break;
+ case USART_CSRB:
+ mask = 0b11111101;
+ /* Mask read-only bits. */
+ value = (value & mask) | (usart->csrb & (0xff ^ mask));
+ usart->csrb = value;
+ if (!(value & USART_CSRB_RXEN)) {
+ /* Receiver disabled, flush input buffer. */
+ usart->data_valid = false;
+ }
+ qemu_set_irq(usart->rxc_irq,
+ ((value & USART_CSRB_RXCIE) &&
+ (usart->csra & USART_CSRA_RXC)) ? 1 : 0);
+ qemu_set_irq(usart->txc_irq,
+ ((value & USART_CSRB_TXCIE) &&
+ (usart->csra & USART_CSRA_TXC)) ? 1 : 0);
+ qemu_set_irq(usart->dre_irq,
+ ((value & USART_CSRB_DREIE) &&
+ (usart->csra & USART_CSRA_DRE)) ? 1 : 0);
+ update_char_mask(usart);
+ break;
+ case USART_CSRC:
+ usart->csrc = value;
+ if ((value & USART_CSRC_MSEL1) && (value & USART_CSRC_MSEL0)) {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: SPI mode not supported by USART\n",
+ __func__);
+ }
+ if ((value & USART_CSRC_MSEL1) && !(value & USART_CSRC_MSEL0)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad USART mode\n", __func__);
+ }
+ if (!(value & USART_CSRC_PM1) && (value & USART_CSRC_PM0)) {
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: Bad USART parity mode\n",
+ __func__);
+ }
+ update_char_mask(usart);
+ break;
+ case USART_BRRL:
+ usart->brrl = value;
+ break;
+ case USART_BRRH:
+ usart->brrh = value & 0b00001111;
+ break;
+ default:
+ qemu_log_mask(
+ LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n",
+ __func__,
+ addr);
+ }
+}
+
+static const MemoryRegionOps avr_usart_ops = {
+ .read = avr_usart_read,
+ .write = avr_usart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.min_access_size = 1, .max_access_size = 1}
+};
+
+static Property avr_usart_properties[] = {
+ DEFINE_PROP_CHR("chardev", AVRUsartState, chr),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void avr_usart_pr(void *opaque, int irq, int level)
+{
+ AVRUsartState *s = AVR_USART(opaque);
+
+ s->enabled = !level;
+
+ if (!s->enabled) {
+ avr_usart_reset(DEVICE(s));
+ }
+}
+
+static void avr_usart_init(Object *obj)
+{
+ AVRUsartState *s = AVR_USART(obj);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->rxc_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->dre_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->txc_irq);
+ memory_region_init_io(&s->mmio, obj, &avr_usart_ops, s, TYPE_AVR_USART, 7);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+ qdev_init_gpio_in(DEVICE(s), avr_usart_pr, 1);
+ s->enabled = true;
+}
+
+static void avr_usart_realize(DeviceState *dev, Error **errp)
+{
+ AVRUsartState *s = AVR_USART(dev);
+ qemu_chr_fe_set_handlers(&s->chr, avr_usart_can_receive,
+ avr_usart_receive, NULL, NULL,
+ s, NULL, true);
+ avr_usart_reset(dev);
+}
+
+static void avr_usart_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = avr_usart_reset;
+ device_class_set_props(dc, avr_usart_properties);
+ dc->realize = avr_usart_realize;
+}
+
+static const TypeInfo avr_usart_info = {
+ .name = TYPE_AVR_USART,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AVRUsartState),
+ .instance_init = avr_usart_init,
+ .class_init = avr_usart_class_init,
+};
+
+static void avr_usart_register_types(void)
+{
+ type_register_static(&avr_usart_info);
+}
+
+type_init(avr_usart_register_types)
diff --git a/include/hw/char/avr_usart.h b/include/hw/char/avr_usart.h
new file mode 100644
index 0000000..5739aaf
--- /dev/null
+++ b/include/hw/char/avr_usart.h
@@ -0,0 +1,93 @@
+/*
+ * AVR USART
+ *
+ * Copyright (c) 2018 University of Kent
+ * Author: Sarah Harris
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+#ifndef HW_CHAR_AVR_USART_H
+#define HW_CHAR_AVR_USART_H
+
+#include "hw/sysbus.h"
+#include "chardev/char-fe.h"
+#include "hw/hw.h"
+
+/* Offsets of registers. */
+#define USART_DR 0x06
+#define USART_CSRA 0x00
+#define USART_CSRB 0x01
+#define USART_CSRC 0x02
+#define USART_BRRH 0x05
+#define USART_BRRL 0x04
+
+/* Relevant bits in regiters. */
+#define USART_CSRA_RXC (1 << 7)
+#define USART_CSRA_TXC (1 << 6)
+#define USART_CSRA_DRE (1 << 5)
+#define USART_CSRA_MPCM (1 << 0)
+
+#define USART_CSRB_RXCIE (1 << 7)
+#define USART_CSRB_TXCIE (1 << 6)
+#define USART_CSRB_DREIE (1 << 5)
+#define USART_CSRB_RXEN (1 << 4)
+#define USART_CSRB_TXEN (1 << 3)
+#define USART_CSRB_CSZ2 (1 << 2)
+#define USART_CSRB_RXB8 (1 << 1)
+#define USART_CSRB_TXB8 (1 << 0)
+
+#define USART_CSRC_MSEL1 (1 << 7)
+#define USART_CSRC_MSEL0 (1 << 6)
+#define USART_CSRC_PM1 (1 << 5)
+#define USART_CSRC_PM0 (1 << 4)
+#define USART_CSRC_CSZ1 (1 << 2)
+#define USART_CSRC_CSZ0 (1 << 1)
+
+#define TYPE_AVR_USART "avr-usart"
+#define AVR_USART(obj) \
+ OBJECT_CHECK(AVRUsartState, (obj), TYPE_AVR_USART)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+
+ CharBackend chr;
+
+ bool enabled;
+
+ uint8_t data;
+ bool data_valid;
+ uint8_t char_mask;
+ /* Control and Status Registers */
+ uint8_t csra;
+ uint8_t csrb;
+ uint8_t csrc;
+ /* Baud Rate Registers (low/high byte) */
+ uint8_t brrh;
+ uint8_t brrl;
+
+ /* Receive Complete */
+ qemu_irq rxc_irq;
+ /* Transmit Complete */
+ qemu_irq txc_irq;
+ /* Data Register Empty */
+ qemu_irq dre_irq;
+} AVRUsartState;
+
+#endif /* HW_CHAR_AVR_USART_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 17/29] hw/timer: Add limited support for AVR 16-bit timer peripheral
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (15 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 16/29] hw/char: Add limited support for AVR USART peripheral Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 18/29] hw/misc: Add limited support for AVR power device Aleksandar Markovic
` (13 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Sarah Harris, Richard Henderson, Philippe Mathieu-Daudé,
Michael Rolnik, Ed Robbins, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Ed Robbins <E.J.C.Robbins@kent.ac.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash info mtree fixes and a file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use qemu_log_mask(LOG_UNIMP), replace goto by return]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
hw/timer/Kconfig | 3 +
hw/timer/Makefile.objs | 2 +
hw/timer/avr_timer16.c | 604 +++++++++++++++++++++++++++++++++++++++++
include/hw/timer/avr_timer16.h | 94 +++++++
4 files changed, 703 insertions(+)
create mode 100644 hw/timer/avr_timer16.c
create mode 100644 include/hw/timer/avr_timer16.h
diff --git a/hw/timer/Kconfig b/hw/timer/Kconfig
index 59b3f44..2521056 100644
--- a/hw/timer/Kconfig
+++ b/hw/timer/Kconfig
@@ -35,3 +35,6 @@ config CMSDK_APB_TIMER
config CMSDK_APB_DUALTIMER
bool
select PTIMER
+
+config AVR_TIMER16
+ bool
diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index dece235..af0913c 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -35,3 +35,5 @@ common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o
common-obj-$(CONFIG_CMSDK_APB_DUALTIMER) += cmsdk-apb-dualtimer.o
common-obj-$(CONFIG_MSF2) += mss-timer.o
common-obj-$(CONFIG_RASPI) += bcm2835_systmr.o
+
+obj-$(CONFIG_AVR_TIMER16) += avr_timer16.o
diff --git a/hw/timer/avr_timer16.c b/hw/timer/avr_timer16.c
new file mode 100644
index 0000000..4e16afc
--- /dev/null
+++ b/hw/timer/avr_timer16.c
@@ -0,0 +1,604 @@
+/*
+ * AVR 16-bit timer
+ *
+ * Copyright (c) 2018 University of Kent
+ * Author: Ed Robbins
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+/*
+ * Driver for 16 bit timers on 8 bit AVR devices.
+ * Note:
+ * ATmega640/V-1280/V-1281/V-2560/V-2561/V timers 1, 3, 4 and 5 are 16 bit
+ */
+
+/*
+ * XXX TODO: Power Reduction Register support
+ * prescaler pause support
+ * PWM modes, GPIO, output capture pins, input compare pin
+ */
+
+#include "qemu/osdep.h"
+#include "hw/timer/avr_timer16.h"
+#include "qemu/log.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+
+/* Register offsets */
+#define T16_CRA 0x0
+#define T16_CRB 0x1
+#define T16_CRC 0x2
+#define T16_CNTL 0x4
+#define T16_CNTH 0x5
+#define T16_ICRL 0x6
+#define T16_ICRH 0x7
+#define T16_OCRAL 0x8
+#define T16_OCRAH 0x9
+#define T16_OCRBL 0xa
+#define T16_OCRBH 0xb
+#define T16_OCRCL 0xc
+#define T16_OCRCH 0xd
+
+/* Field masks */
+#define T16_CRA_WGM01 0x3
+#define T16_CRA_COMC 0xc
+#define T16_CRA_COMB 0x30
+#define T16_CRA_COMA 0xc0
+#define T16_CRA_OC_CONF \
+ (T16_CRA_COMA | T16_CRA_COMB | T16_CRA_COMC)
+
+#define T16_CRB_CS 0x7
+#define T16_CRB_WGM23 0x18
+#define T16_CRB_ICES 0x40
+#define T16_CRB_ICNC 0x80
+
+#define T16_CRC_FOCC 0x20
+#define T16_CRC_FOCB 0x40
+#define T16_CRC_FOCA 0x80
+
+/* Fields masks both TIMSK and TIFR (interrupt mask/flag registers) */
+#define T16_INT_TOV 0x1 /* Timer overflow */
+#define T16_INT_OCA 0x2 /* Output compare A */
+#define T16_INT_OCB 0x4 /* Output compare B */
+#define T16_INT_OCC 0x8 /* Output compare C */
+#define T16_INT_IC 0x20 /* Input capture */
+
+/* Clock source values */
+#define T16_CLKSRC_STOPPED 0
+#define T16_CLKSRC_DIV1 1
+#define T16_CLKSRC_DIV8 2
+#define T16_CLKSRC_DIV64 3
+#define T16_CLKSRC_DIV256 4
+#define T16_CLKSRC_DIV1024 5
+#define T16_CLKSRC_EXT_FALLING 6
+#define T16_CLKSRC_EXT_RISING 7
+
+/* Timer mode values (not including PWM modes) */
+#define T16_MODE_NORMAL 0
+#define T16_MODE_CTC_OCRA 4
+#define T16_MODE_CTC_ICR 12
+
+/* Accessors */
+#define CLKSRC(t16) (t16->crb & T16_CRB_CS)
+#define MODE(t16) (((t16->crb & T16_CRB_WGM23) >> 1) | \
+ (t16->cra & T16_CRA_WGM01))
+#define CNT(t16) VAL16(t16->cntl, t16->cnth)
+#define OCRA(t16) VAL16(t16->ocral, t16->ocrah)
+#define OCRB(t16) VAL16(t16->ocrbl, t16->ocrbh)
+#define OCRC(t16) VAL16(t16->ocrcl, t16->ocrch)
+#define ICR(t16) VAL16(t16->icrl, t16->icrh)
+
+/* Helper macros */
+#define VAL16(l, h) ((h << 8) | l)
+#define DB_PRINT(fmt, args...) /* Nothing */
+/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
+
+static inline int64_t avr_timer16_ns_to_ticks(AVRTimer16State *t16, int64_t t)
+{
+ if (t16->period_ns == 0) {
+ return 0;
+ }
+ return t / t16->period_ns;
+}
+
+static void avr_timer16_update_cnt(AVRTimer16State *t16)
+{
+ uint16_t cnt;
+ cnt = avr_timer16_ns_to_ticks(t16, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
+ t16->reset_time_ns);
+ t16->cntl = (uint8_t)(cnt & 0xff);
+ t16->cnth = (uint8_t)((cnt & 0xff00) >> 8);
+}
+
+static inline void avr_timer16_recalc_reset_time(AVRTimer16State *t16)
+{
+ t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
+ CNT(t16) * t16->period_ns;
+}
+
+static void avr_timer16_clock_reset(AVRTimer16State *t16)
+{
+ t16->cntl = 0;
+ t16->cnth = 0;
+ t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+}
+
+static void avr_timer16_clksrc_update(AVRTimer16State *t16)
+{
+ uint16_t divider = 0;
+ switch (CLKSRC(t16)) {
+ case T16_CLKSRC_EXT_FALLING:
+ case T16_CLKSRC_EXT_RISING:
+ qemu_log_mask(LOG_UNIMP, "%s: external clock source unsupported\n",
+ __func__);
+ break;
+ case T16_CLKSRC_STOPPED:
+ break;
+ case T16_CLKSRC_DIV1:
+ divider = 1;
+ break;
+ case T16_CLKSRC_DIV8:
+ divider = 8;
+ break;
+ case T16_CLKSRC_DIV64:
+ divider = 64;
+ break;
+ case T16_CLKSRC_DIV256:
+ divider = 256;
+ break;
+ case T16_CLKSRC_DIV1024:
+ divider = 1024;
+ break;
+ default:
+ break;
+ }
+ if (divider) {
+ t16->freq_hz = t16->cpu_freq_hz / divider;
+ t16->period_ns = NANOSECONDS_PER_SECOND / t16->freq_hz;
+ DB_PRINT("Timer frequency %" PRIu64 " hz, period %" PRIu64 " ns (%f s)",
+ t16->freq_hz, t16->period_ns, 1 / (double)t16->freq_hz);
+ }
+}
+
+static void avr_timer16_set_alarm(AVRTimer16State *t16)
+{
+ if (CLKSRC(t16) == T16_CLKSRC_EXT_FALLING ||
+ CLKSRC(t16) == T16_CLKSRC_EXT_RISING ||
+ CLKSRC(t16) == T16_CLKSRC_STOPPED) {
+ /* Timer is disabled or set to external clock source (unsupported) */
+ return;
+ }
+
+ uint64_t alarm_offset = 0xffff;
+ enum NextInterrupt next_interrupt = OVERFLOW;
+
+ switch (MODE(t16)) {
+ case T16_MODE_NORMAL:
+ /* Normal mode */
+ if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16) &&
+ (t16->imsk & T16_INT_OCA)) {
+ alarm_offset = OCRA(t16);
+ next_interrupt = COMPA;
+ }
+ break;
+ case T16_MODE_CTC_OCRA:
+ /* CTC mode, top = ocra */
+ if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16)) {
+ alarm_offset = OCRA(t16);
+ next_interrupt = COMPA;
+ }
+ break;
+ case T16_MODE_CTC_ICR:
+ /* CTC mode, top = icr */
+ if (ICR(t16) < alarm_offset && ICR(t16) > CNT(t16)) {
+ alarm_offset = ICR(t16);
+ next_interrupt = CAPT;
+ }
+ if (OCRA(t16) < alarm_offset && OCRA(t16) > CNT(t16) &&
+ (t16->imsk & T16_INT_OCA)) {
+ alarm_offset = OCRA(t16);
+ next_interrupt = COMPA;
+ }
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: pwm modes are unsupported\n",
+ __func__);
+ return;
+ }
+ if (OCRB(t16) < alarm_offset && OCRB(t16) > CNT(t16) &&
+ (t16->imsk & T16_INT_OCB)) {
+ alarm_offset = OCRB(t16);
+ next_interrupt = COMPB;
+ }
+ if (OCRC(t16) < alarm_offset && OCRB(t16) > CNT(t16) &&
+ (t16->imsk & T16_INT_OCC)) {
+ alarm_offset = OCRB(t16);
+ next_interrupt = COMPC;
+ }
+ alarm_offset -= CNT(t16);
+
+ t16->next_interrupt = next_interrupt;
+ uint64_t alarm_ns =
+ t16->reset_time_ns + ((CNT(t16) + alarm_offset) * t16->period_ns);
+ timer_mod(t16->timer, alarm_ns);
+
+ DB_PRINT("next alarm %" PRIu64 " ns from now",
+ alarm_offset * t16->period_ns);
+}
+
+static void avr_timer16_interrupt(void *opaque)
+{
+ AVRTimer16State *t16 = opaque;
+ uint8_t mode = MODE(t16);
+
+ avr_timer16_update_cnt(t16);
+
+ if (CLKSRC(t16) == T16_CLKSRC_EXT_FALLING ||
+ CLKSRC(t16) == T16_CLKSRC_EXT_RISING ||
+ CLKSRC(t16) == T16_CLKSRC_STOPPED) {
+ /* Timer is disabled or set to external clock source (unsupported) */
+ return;
+ }
+
+ DB_PRINT("interrupt, cnt = %d", CNT(t16));
+
+ /* Counter overflow */
+ if (t16->next_interrupt == OVERFLOW) {
+ DB_PRINT("0xffff overflow");
+ avr_timer16_clock_reset(t16);
+ if (t16->imsk & T16_INT_TOV) {
+ t16->ifr |= T16_INT_TOV;
+ qemu_set_irq(t16->ovf_irq, 1);
+ }
+ }
+ /* Check for ocra overflow in CTC mode */
+ if (mode == T16_MODE_CTC_OCRA && t16->next_interrupt == COMPA) {
+ DB_PRINT("CTC OCRA overflow");
+ avr_timer16_clock_reset(t16);
+ }
+ /* Check for icr overflow in CTC mode */
+ if (mode == T16_MODE_CTC_ICR && t16->next_interrupt == CAPT) {
+ DB_PRINT("CTC ICR overflow");
+ avr_timer16_clock_reset(t16);
+ if (t16->imsk & T16_INT_IC) {
+ t16->ifr |= T16_INT_IC;
+ qemu_set_irq(t16->capt_irq, 1);
+ }
+ }
+ /* Check for output compare interrupts */
+ if (t16->imsk & T16_INT_OCA && t16->next_interrupt == COMPA) {
+ t16->ifr |= T16_INT_OCA;
+ qemu_set_irq(t16->compa_irq, 1);
+ }
+ if (t16->imsk & T16_INT_OCB && t16->next_interrupt == COMPB) {
+ t16->ifr |= T16_INT_OCB;
+ qemu_set_irq(t16->compb_irq, 1);
+ }
+ if (t16->imsk & T16_INT_OCC && t16->next_interrupt == COMPC) {
+ t16->ifr |= T16_INT_OCC;
+ qemu_set_irq(t16->compc_irq, 1);
+ }
+ avr_timer16_set_alarm(t16);
+}
+
+static void avr_timer16_reset(DeviceState *dev)
+{
+ AVRTimer16State *t16 = AVR_TIMER16(dev);
+
+ avr_timer16_clock_reset(t16);
+ avr_timer16_clksrc_update(t16);
+ avr_timer16_set_alarm(t16);
+
+ qemu_set_irq(t16->capt_irq, 0);
+ qemu_set_irq(t16->compa_irq, 0);
+ qemu_set_irq(t16->compb_irq, 0);
+ qemu_set_irq(t16->compc_irq, 0);
+ qemu_set_irq(t16->ovf_irq, 0);
+}
+
+static uint64_t avr_timer16_read(void *opaque, hwaddr offset, unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ uint8_t retval = 0;
+
+ switch (offset) {
+ case T16_CRA:
+ retval = t16->cra;
+ break;
+ case T16_CRB:
+ retval = t16->crb;
+ break;
+ case T16_CRC:
+ retval = t16->crc;
+ break;
+ case T16_CNTL:
+ avr_timer16_update_cnt(t16);
+ t16->rtmp = t16->cnth;
+ retval = t16->cntl;
+ break;
+ case T16_CNTH:
+ retval = t16->rtmp;
+ break;
+ case T16_ICRL:
+ /*
+ * The timer copies cnt to icr when the input capture pin changes
+ * state or when the analog comparator has a match. We don't
+ * emulate this behaviour. We do support it's use for defining a
+ * TOP value in T16_MODE_CTC_ICR
+ */
+ t16->rtmp = t16->icrh;
+ retval = t16->icrl;
+ break;
+ case T16_ICRH:
+ retval = t16->rtmp;
+ break;
+ case T16_OCRAL:
+ retval = t16->ocral;
+ break;
+ case T16_OCRAH:
+ retval = t16->ocrah;
+ break;
+ case T16_OCRBL:
+ retval = t16->ocrbl;
+ break;
+ case T16_OCRBH:
+ retval = t16->ocrbh;
+ break;
+ case T16_OCRCL:
+ retval = t16->ocrcl;
+ break;
+ case T16_OCRCH:
+ retval = t16->ocrch;
+ break;
+ default:
+ break;
+ }
+ return (uint64_t)retval;
+}
+
+static void avr_timer16_write(void *opaque, hwaddr offset,
+ uint64_t val64, unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ uint8_t val8 = (uint8_t)val64;
+ uint8_t prev_clk_src = CLKSRC(t16);
+
+ DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
+
+ switch (offset) {
+ case T16_CRA:
+ t16->cra = val8;
+ if (t16->cra & T16_CRA_OC_CONF) {
+ qemu_log_mask(LOG_UNIMP, "%s: output compare pins unsupported\n",
+ __func__);
+ }
+ break;
+ case T16_CRB:
+ t16->crb = val8;
+ if (t16->crb & T16_CRB_ICNC) {
+ qemu_log_mask(LOG_UNIMP,
+ "%s: input capture noise canceller unsupported\n",
+ __func__);
+ }
+ if (t16->crb & T16_CRB_ICES) {
+ qemu_log_mask(LOG_UNIMP, "%s: input capture unsupported\n",
+ __func__);
+ }
+ if (CLKSRC(t16) != prev_clk_src) {
+ avr_timer16_clksrc_update(t16);
+ if (prev_clk_src == T16_CLKSRC_STOPPED) {
+ t16->reset_time_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ }
+ }
+ break;
+ case T16_CRC:
+ t16->crc = val8;
+ qemu_log_mask(LOG_UNIMP, "%s: output compare pins unsupported\n",
+ __func__);
+ break;
+ case T16_CNTL:
+ /*
+ * CNT is the 16-bit counter value, it must be read/written via
+ * a temporary register (rtmp) to make the read/write atomic.
+ */
+ /* ICR also has this behaviour, and shares rtmp */
+ /*
+ * Writing CNT blocks compare matches for one clock cycle.
+ * Writing CNT to TOP or to an OCR value (if in use) will
+ * skip the relevant interrupt
+ */
+ t16->cntl = val8;
+ t16->cnth = t16->rtmp;
+ avr_timer16_recalc_reset_time(t16);
+ break;
+ case T16_CNTH:
+ t16->rtmp = val8;
+ break;
+ case T16_ICRL:
+ /* ICR can only be written in mode T16_MODE_CTC_ICR */
+ if (MODE(t16) == T16_MODE_CTC_ICR) {
+ t16->icrl = val8;
+ t16->icrh = t16->rtmp;
+ }
+ break;
+ case T16_ICRH:
+ if (MODE(t16) == T16_MODE_CTC_ICR) {
+ t16->rtmp = val8;
+ }
+ break;
+ case T16_OCRAL:
+ /*
+ * OCRn cause the relevant output compare flag to be raised, and
+ * trigger an interrupt, when CNT is equal to the value here
+ */
+ t16->ocral = val8;
+ break;
+ case T16_OCRAH:
+ t16->ocrah = val8;
+ break;
+ case T16_OCRBL:
+ t16->ocrbl = val8;
+ break;
+ case T16_OCRBH:
+ t16->ocrbh = val8;
+ break;
+ case T16_OCRCL:
+ t16->ocrcl = val8;
+ break;
+ case T16_OCRCH:
+ t16->ocrch = val8;
+ break;
+ default:
+ break;
+ }
+ avr_timer16_set_alarm(t16);
+}
+
+static uint64_t avr_timer16_imsk_read(void *opaque,
+ hwaddr offset,
+ unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ if (offset != 0) {
+ return 0;
+ }
+ return t16->imsk;
+}
+
+static void avr_timer16_imsk_write(void *opaque, hwaddr offset,
+ uint64_t val64, unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ if (offset != 0) {
+ return;
+ }
+ t16->imsk = (uint8_t)val64;
+}
+
+static uint64_t avr_timer16_ifr_read(void *opaque,
+ hwaddr offset,
+ unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ if (offset != 0) {
+ return 0;
+ }
+ return t16->ifr;
+}
+
+static void avr_timer16_ifr_write(void *opaque, hwaddr offset,
+ uint64_t val64, unsigned size)
+{
+ assert(size == 1);
+ AVRTimer16State *t16 = opaque;
+ if (offset != 0) {
+ return;
+ }
+ t16->ifr = (uint8_t)val64;
+}
+
+static const MemoryRegionOps avr_timer16_ops = {
+ .read = avr_timer16_read,
+ .write = avr_timer16_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = 1}
+};
+
+static const MemoryRegionOps avr_timer16_imsk_ops = {
+ .read = avr_timer16_imsk_read,
+ .write = avr_timer16_imsk_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = 1}
+};
+
+static const MemoryRegionOps avr_timer16_ifr_ops = {
+ .read = avr_timer16_ifr_read,
+ .write = avr_timer16_ifr_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = 1}
+};
+
+static Property avr_timer16_properties[] = {
+ DEFINE_PROP_UINT8("id", struct AVRTimer16State, id, 0),
+ DEFINE_PROP_UINT64("cpu-frequency-hz", struct AVRTimer16State,
+ cpu_freq_hz, 20000000),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void avr_timer16_pr(void *opaque, int irq, int level)
+{
+ AVRTimer16State *s = AVR_TIMER16(opaque);
+
+ s->enabled = !level;
+
+ if (!s->enabled) {
+ avr_timer16_reset(DEVICE(s));
+ }
+}
+
+static void avr_timer16_init(Object *obj)
+{
+ AVRTimer16State *s = AVR_TIMER16(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->capt_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compa_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compb_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->compc_irq);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->ovf_irq);
+
+ memory_region_init_io(&s->iomem, obj, &avr_timer16_ops,
+ s, "avr-timer16", 0xe);
+ memory_region_init_io(&s->imsk_iomem, obj, &avr_timer16_imsk_ops,
+ s, "avr-timer16-intmask", 0x1);
+ memory_region_init_io(&s->ifr_iomem, obj, &avr_timer16_ifr_ops,
+ s, "avr-timer16-intflag", 0x1);
+
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->imsk_iomem);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->ifr_iomem);
+ qdev_init_gpio_in(DEVICE(s), avr_timer16_pr, 1);
+
+ s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, avr_timer16_interrupt, s);
+ s->enabled = true;
+}
+
+static void avr_timer16_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = avr_timer16_reset;
+ device_class_set_props(dc, avr_timer16_properties);
+}
+
+static const TypeInfo avr_timer16_info = {
+ .name = TYPE_AVR_TIMER16,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AVRTimer16State),
+ .instance_init = avr_timer16_init,
+ .class_init = avr_timer16_class_init,
+};
+
+static void avr_timer16_register_types(void)
+{
+ type_register_static(&avr_timer16_info);
+}
+
+type_init(avr_timer16_register_types)
diff --git a/include/hw/timer/avr_timer16.h b/include/hw/timer/avr_timer16.h
new file mode 100644
index 0000000..982019d
--- /dev/null
+++ b/include/hw/timer/avr_timer16.h
@@ -0,0 +1,94 @@
+/*
+ * AVR 16-bit timer
+ *
+ * Copyright (c) 2018 University of Kent
+ * Author: Ed Robbins
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+/*
+ * Driver for 16 bit timers on 8 bit AVR devices.
+ * Note:
+ * On ATmega640/V-1280/V-1281/V-2560/V-2561/V timers 1, 3, 4 and 5 are 16 bit
+ */
+
+#ifndef HW_TIMER_AVR_TIMER16_H
+#define HW_TIMER_AVR_TIMER16_H
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "hw/hw.h"
+
+enum NextInterrupt {
+ OVERFLOW,
+ COMPA,
+ COMPB,
+ COMPC,
+ CAPT
+};
+
+#define TYPE_AVR_TIMER16 "avr-timer16"
+#define AVR_TIMER16(obj) \
+ OBJECT_CHECK(AVRTimer16State, (obj), TYPE_AVR_TIMER16)
+
+typedef struct AVRTimer16State {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion iomem;
+ MemoryRegion imsk_iomem;
+ MemoryRegion ifr_iomem;
+ QEMUTimer *timer;
+ qemu_irq capt_irq;
+ qemu_irq compa_irq;
+ qemu_irq compb_irq;
+ qemu_irq compc_irq;
+ qemu_irq ovf_irq;
+
+ bool enabled;
+
+ /* registers */
+ uint8_t cra;
+ uint8_t crb;
+ uint8_t crc;
+ uint8_t cntl;
+ uint8_t cnth;
+ uint8_t icrl;
+ uint8_t icrh;
+ uint8_t ocral;
+ uint8_t ocrah;
+ uint8_t ocrbl;
+ uint8_t ocrbh;
+ uint8_t ocrcl;
+ uint8_t ocrch;
+ /*
+ * Reads and writes to CNT and ICR utilise a bizarre temporary
+ * register, which we emulate
+ */
+ uint8_t rtmp;
+ uint8_t imsk;
+ uint8_t ifr;
+
+ uint8_t id;
+ uint64_t cpu_freq_hz;
+ uint64_t freq_hz;
+ uint64_t period_ns;
+ uint64_t reset_time_ns;
+ enum NextInterrupt next_interrupt;
+} AVRTimer16State;
+
+#endif /* HW_TIMER_AVR_TIMER16_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 18/29] hw/misc: Add limited support for AVR power device
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (16 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 17/29] hw/timer: Add limited support for AVR 16-bit timer peripheral Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 19/29] target/avr: Add section about AVR into QEMU documentation Aleksandar Markovic
` (12 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Michael Rolnik, Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
This is a simple device of just one register, and whenever this
register is written to it calls qemu_set_irq function for each
of 8 bits/IRQs. It is used to implement AVR Power Reduction.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash include fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
hw/misc/Kconfig | 3 ++
hw/misc/Makefile.objs | 2 +
hw/misc/avr_power.c | 112 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/misc/avr_power.h | 46 ++++++++++++++++++
4 files changed, 163 insertions(+)
create mode 100644 hw/misc/avr_power.c
create mode 100644 include/hw/misc/avr_power.h
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index bdd77d8..92c397c 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -131,4 +131,7 @@ config MAC_VIA
select MOS6522
select ADB
+config AVR_POWER
+ bool
+
source macio/Kconfig
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index da993f4..df8e457 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -85,3 +85,5 @@ common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
obj-$(CONFIG_MAC_VIA) += mac_via.o
common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o
+
+obj-$(CONFIG_AVR_POWER) += avr_power.o
diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
new file mode 100644
index 0000000..598bc72
--- /dev/null
+++ b/hw/misc/avr_power.c
@@ -0,0 +1,112 @@
+/*
+ * AVR Power Reduction Management
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/misc/avr_power.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/irq.h"
+
+#define DB_PRINT(fmt, args...) /* Nothing */
+/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
+
+static void avr_mask_reset(DeviceState *dev)
+{
+ AVRMaskState *s = AVR_MASK(dev);
+
+ s->val = 0x00;
+
+ for (int i = 0; i < 8; i++) {
+ qemu_set_irq(s->irq[i], 0);
+ }
+}
+
+static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
+{
+ assert(size == 1);
+ assert(offset == 0);
+ AVRMaskState *s = opaque;
+
+ return (uint64_t)s->val;
+}
+
+static void avr_mask_write(void *opaque, hwaddr offset,
+ uint64_t val64, unsigned size)
+{
+ assert(size == 1);
+ assert(offset == 0);
+ AVRMaskState *s = opaque;
+ uint8_t val8 = val64;
+
+ DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
+
+ s->val = val8;
+ for (int i = 0; i < 8; i++) {
+ qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
+ }
+}
+
+static const MemoryRegionOps avr_mask_ops = {
+ .read = avr_mask_read,
+ .write = avr_mask_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {.max_access_size = 1}
+};
+
+static void avr_mask_init(Object *dev)
+{
+ AVRMaskState *s = AVR_MASK(dev);
+ SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
+
+ memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
+ 0x01);
+ sysbus_init_mmio(busdev, &s->iomem);
+
+ for (int i = 0; i < 8; i++) {
+ sysbus_init_irq(busdev, &s->irq[i]);
+ }
+ s->val = 0x00;
+}
+
+static void avr_mask_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = avr_mask_reset;
+}
+
+static const TypeInfo avr_mask_info = {
+ .name = TYPE_AVR_MASK,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AVRMaskState),
+ .class_init = avr_mask_class_init,
+ .instance_init = avr_mask_init,
+};
+
+static void avr_mask_register_types(void)
+{
+ type_register_static(&avr_mask_info);
+}
+
+type_init(avr_mask_register_types)
diff --git a/include/hw/misc/avr_power.h b/include/hw/misc/avr_power.h
new file mode 100644
index 0000000..434ac23
--- /dev/null
+++ b/include/hw/misc/avr_power.h
@@ -0,0 +1,46 @@
+/*
+ * AVR Power Reduction Management
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_MISC_AVR_POWER_H
+#define HW_MISC_AVR_POWER_H
+
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+
+
+#define TYPE_AVR_MASK "avr-power"
+#define AVR_MASK(obj) OBJECT_CHECK(AVRMaskState, (obj), TYPE_AVR_MASK)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion iomem;
+
+ uint8_t val;
+ qemu_irq irq[8];
+} AVRMaskState;
+
+#endif /* HW_MISC_AVR_POWER_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 19/29] target/avr: Add section about AVR into QEMU documentation
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (17 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 18/29] hw/misc: Add limited support for AVR power device Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-02-01 13:19 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU Aleksandar Markovic
` (11 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Michael Rolnik, Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Explains basic ways of using AVR target in QEMU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20200118191416.19934-16-mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Fixed typos]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
qemu-doc.texi | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/qemu-doc.texi b/qemu-doc.texi
index 2328e7e..aaf4e54 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -1723,6 +1723,7 @@ differences are mentioned in the following sections.
* Microblaze System emulator::
* SH4 System emulator::
* Xtensa System emulator::
+* AVR System emulator::
@end menu
@node PowerPC System emulator
@@ -2496,6 +2497,56 @@ so should only be used with trusted guest OS.
@c man end
+@node AVR System emulator
+@section AVR System emulator
+@cindex system emulation (AVR)
+
+Use the executable @file{qemu-system-avr} to emulates a AVR 8 bit based machine
+having one for the following cores: avr1, avr2, avr25, avr3, avr31, avr35, avr4,
+avr5, avr51, avr6, avrtiny, xmega2, xmega3, xmega4, xmega5, xmega6 and xmega7.
+
+As for now it supports few Arduino boards for educational and testing purposes.
+These boards use a ATmega controller, which model is limited to USART & 16 bit
+timer devices, enought to run FreeRTOS based applications (like this @url{https://github.com/seharris/qemu-avr-tests/blob/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf,,demo})
+
+Following are examples of possible usages, assuming demo.elf is compiled for
+AVR cpu
+@itemize
+
+@item Continuous non interrupted execution
+@example
+qemu-system-avr -machine mega2560 -bios demo.elf
+@end example
+
+@item Continuous non interrupted execution with serial output into telnet window
+@example
+qemu-system-avr -machine mega2560 -bios demo.elf -serial tcp::5678,server,nowait -nographic
+@end example
+and then in another shell
+@example
+telnet localhost 5678
+@end example
+
+@item Debugging wit GDB debugger
+@example
+qemu-system-avr -machine mega2560 -bios demo.elf -s -S
+@end example
+and then in another shell
+@example
+avr-gdb demo.elf
+@end example
+and then within GDB shell
+@example
+target remote :1234
+@end example
+
+@item Print out executed instructions
+@example
+qemu-system-avr -machine mega2560 -bios demo.elf -d in_asm
+@end example
+
+@end itemize
+
@node QEMU User space emulator
@chapter QEMU User space emulator
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 19/29] target/avr: Add section about AVR into QEMU documentation
2020-01-31 0:03 ` [PATCH rc4 19/29] target/avr: Add section about AVR into QEMU documentation Aleksandar Markovic
@ 2020-02-01 13:19 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-02-01 13:19 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Richard Henderson, Michael Rolnik, qemu-devel,
Philippe Mathieu-Daudé
[-- Attachment #1: Type: text/plain, Size: 3037 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> Explains basic ways of using AVR target in QEMU.
>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Message-Id: <20200118191416.19934-16-mrolnik@gmail.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> [PMD: Fixed typos]
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> qemu-doc.texi | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
>
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> diff --git a/qemu-doc.texi b/qemu-doc.texi
> index 2328e7e..aaf4e54 100644
> --- a/qemu-doc.texi
> +++ b/qemu-doc.texi
> @@ -1723,6 +1723,7 @@ differences are mentioned in the following sections.
> * Microblaze System emulator::
> * SH4 System emulator::
> * Xtensa System emulator::
> +* AVR System emulator::
> @end menu
>
> @node PowerPC System emulator
> @@ -2496,6 +2497,56 @@ so should only be used with trusted guest OS.
>
> @c man end
>
> +@node AVR System emulator
> +@section AVR System emulator
> +@cindex system emulation (AVR)
> +
> +Use the executable @file{qemu-system-avr} to emulates a AVR 8 bit based
> machine
> +having one for the following cores: avr1, avr2, avr25, avr3, avr31,
> avr35, avr4,
> +avr5, avr51, avr6, avrtiny, xmega2, xmega3, xmega4, xmega5, xmega6 and
> xmega7.
> +
> +As for now it supports few Arduino boards for educational and testing
> purposes.
> +These boards use a ATmega controller, which model is limited to USART &
> 16 bit
> +timer devices, enought to run FreeRTOS based applications (like this @url{
> https://github.com/seharris/qemu-avr-tests/blob/master/free-rtos/Demo/AVR_
> ATMega2560_GCC/demo.elf,,demo})
> +
> +Following are examples of possible usages, assuming demo.elf is compiled
> for
> +AVR cpu
> +@itemize
> +
> +@item Continuous non interrupted execution
> +@example
> +qemu-system-avr -machine mega2560 -bios demo.elf
> +@end example
> +
> +@item Continuous non interrupted execution with serial output into telnet
> window
> +@example
> +qemu-system-avr -machine mega2560 -bios demo.elf -serial
> tcp::5678,server,nowait -nographic
> +@end example
> +and then in another shell
> +@example
> +telnet localhost 5678
> +@end example
> +
> +@item Debugging wit GDB debugger
> +@example
> +qemu-system-avr -machine mega2560 -bios demo.elf -s -S
> +@end example
> +and then in another shell
> +@example
> +avr-gdb demo.elf
> +@end example
> +and then within GDB shell
> +@example
> +target remote :1234
> +@end example
> +
> +@item Print out executed instructions
> +@example
> +qemu-system-avr -machine mega2560 -bios demo.elf -d in_asm
> +@end example
> +
> +@end itemize
> +
> @node QEMU User space emulator
> @chapter QEMU User space emulator
>
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 4304 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (18 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 19/29] target/avr: Add section about AVR into QEMU documentation Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:23 ` Philippe Mathieu-Daudé
2020-01-31 0:03 ` [PATCH rc4 21/29] target/avr: Add machine none test Aleksandar Markovic
` (10 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Add AVR related definitions into QEMU.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
arch_init.c | 2 ++
include/disas/dis-asm.h | 19 +++++++++++++++++++
include/sysemu/arch_init.h | 1 +
qapi/machine.json | 3 ++-
4 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch_init.c b/arch_init.c
index 705d0b9..6a74116 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -89,6 +89,8 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_XTENSA)
#define QEMU_ARCH QEMU_ARCH_XTENSA
+#elif defined(TARGET_AVR)
+#define QEMU_ARCH QEMU_ARCH_AVR
#endif
const uint32_t arch_type = QEMU_ARCH;
diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
index f87f468..a36e658 100644
--- a/include/disas/dis-asm.h
+++ b/include/disas/dis-asm.h
@@ -211,6 +211,25 @@ enum bfd_architecture
#define bfd_mach_m32r 0 /* backwards compatibility */
bfd_arch_mn10200, /* Matsushita MN10200 */
bfd_arch_mn10300, /* Matsushita MN10300 */
+ bfd_arch_avr, /* AVR microcontrollers */
+#define bfd_mach_avr1 1
+#define bfd_mach_avr2 2
+#define bfd_mach_avr25 25
+#define bfd_mach_avr3 3
+#define bfd_mach_avr31 31
+#define bfd_mach_avr35 35
+#define bfd_mach_avr4 4
+#define bfd_mach_avr5 5
+#define bfd_mach_avr51 51
+#define bfd_mach_avr6 6
+#define bfd_mach_avrtiny 100
+#define bfd_mach_avrxmega1 101
+#define bfd_mach_avrxmega2 102
+#define bfd_mach_avrxmega3 103
+#define bfd_mach_avrxmega4 104
+#define bfd_mach_avrxmega5 105
+#define bfd_mach_avrxmega6 106
+#define bfd_mach_avrxmega7 107
bfd_arch_cris, /* Axis CRIS */
#define bfd_mach_cris_v0_v10 255
#define bfd_mach_cris_v32 32
diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
index 62c6fe4..893df26 100644
--- a/include/sysemu/arch_init.h
+++ b/include/sysemu/arch_init.h
@@ -24,6 +24,7 @@ enum {
QEMU_ARCH_NIOS2 = (1 << 17),
QEMU_ARCH_HPPA = (1 << 18),
QEMU_ARCH_RISCV = (1 << 19),
+ QEMU_ARCH_AVR = (1 << 20),
};
extern const uint32_t arch_type;
diff --git a/qapi/machine.json b/qapi/machine.json
index b3d30bc..f2dc385 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -21,11 +21,12 @@
# is true even for "qemu-system-x86_64".
#
# ppcemb: dropped in 3.1
+# avr: since 5.0
#
# Since: 3.0
##
{ 'enum' : 'SysEmuTarget',
- 'data' : [ 'aarch64', 'alpha', 'arm', 'cris', 'hppa', 'i386', 'lm32',
+ 'data' : [ 'aarch64', 'alpha', 'arm', 'avr', 'cris', 'hppa', 'i386', 'lm32',
'm68k', 'microblaze', 'microblazeel', 'mips', 'mips64',
'mips64el', 'mipsel', 'moxie', 'nios2', 'or1k', 'ppc',
'ppc64', 'riscv32', 'riscv64', 's390x', 'sh4',
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU
2020-01-31 0:03 ` [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU Aleksandar Markovic
@ 2020-01-31 0:23 ` Philippe Mathieu-Daudé
2020-01-31 0:27 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 0:23 UTC (permalink / raw)
To: Aleksandar Markovic, qemu-devel
Cc: Michael Rolnik, Richard Henderson, Aleksandar Markovic
On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> Add AVR related definitions into QEMU.
>
> [AM: Remove word 'Atmel' from filenames and all elements of code]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> arch_init.c | 2 ++
> include/disas/dis-asm.h | 19 +++++++++++++++++++
> include/sysemu/arch_init.h | 1 +
> qapi/machine.json | 3 ++-
> 4 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch_init.c b/arch_init.c
> index 705d0b9..6a74116 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -89,6 +89,8 @@ int graphic_depth = 32;
> #define QEMU_ARCH QEMU_ARCH_UNICORE32
> #elif defined(TARGET_XTENSA)
> #define QEMU_ARCH QEMU_ARCH_XTENSA
> +#elif defined(TARGET_AVR)
> +#define QEMU_ARCH QEMU_ARCH_AVR
> #endif
>
> const uint32_t arch_type = QEMU_ARCH;
> diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
> index f87f468..a36e658 100644
> --- a/include/disas/dis-asm.h
> +++ b/include/disas/dis-asm.h
> @@ -211,6 +211,25 @@ enum bfd_architecture
> #define bfd_mach_m32r 0 /* backwards compatibility */
> bfd_arch_mn10200, /* Matsushita MN10200 */
> bfd_arch_mn10300, /* Matsushita MN10300 */
> + bfd_arch_avr, /* AVR microcontrollers */
> +#define bfd_mach_avr1 1
> +#define bfd_mach_avr2 2
> +#define bfd_mach_avr25 25
> +#define bfd_mach_avr3 3
> +#define bfd_mach_avr31 31
> +#define bfd_mach_avr35 35
> +#define bfd_mach_avr4 4
> +#define bfd_mach_avr5 5
> +#define bfd_mach_avr51 51
> +#define bfd_mach_avr6 6
> +#define bfd_mach_avrtiny 100
> +#define bfd_mach_avrxmega1 101
> +#define bfd_mach_avrxmega2 102
> +#define bfd_mach_avrxmega3 103
> +#define bfd_mach_avrxmega4 104
> +#define bfd_mach_avrxmega5 105
> +#define bfd_mach_avrxmega6 106
> +#define bfd_mach_avrxmega7 107
I think the changes in include/disas/dis-asm.h should go in patch #6
"target/avr: Add defintions of AVR core types" where the definitions are
used:
const char *avr_flags_to_cpu_type(uint32_t flags, const char
*def_cpu_type)
{
switch (flags & EF_AVR_MACH) {
case bfd_mach_avr1:
return AVR_CPU_TYPE_NAME("avr1");
> bfd_arch_cris, /* Axis CRIS */
> #define bfd_mach_cris_v0_v10 255
> #define bfd_mach_cris_v32 32
> diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
> index 62c6fe4..893df26 100644
> --- a/include/sysemu/arch_init.h
> +++ b/include/sysemu/arch_init.h
> @@ -24,6 +24,7 @@ enum {
> QEMU_ARCH_NIOS2 = (1 << 17),
> QEMU_ARCH_HPPA = (1 << 18),
> QEMU_ARCH_RISCV = (1 << 19),
> + QEMU_ARCH_AVR = (1 << 20),
> };
>
> extern const uint32_t arch_type;
> diff --git a/qapi/machine.json b/qapi/machine.json
> index b3d30bc..f2dc385 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -21,11 +21,12 @@
> # is true even for "qemu-system-x86_64".
> #
> # ppcemb: dropped in 3.1
> +# avr: since 5.0
> #
> # Since: 3.0
> ##
> { 'enum' : 'SysEmuTarget',
> - 'data' : [ 'aarch64', 'alpha', 'arm', 'cris', 'hppa', 'i386', 'lm32',
> + 'data' : [ 'aarch64', 'alpha', 'arm', 'avr', 'cris', 'hppa', 'i386', 'lm32',
> 'm68k', 'microblaze', 'microblazeel', 'mips', 'mips64',
> 'mips64el', 'mipsel', 'moxie', 'nios2', 'or1k', 'ppc',
> 'ppc64', 'riscv32', 'riscv64', 's390x', 'sh4',
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU
2020-01-31 0:23 ` Philippe Mathieu-Daudé
@ 2020-01-31 0:27 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:27 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Michael Rolnik, Richard Henderson, QEMU Developers
On Fri, Jan 31, 2020 at 1:23 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
> > From: Michael Rolnik <mrolnik@gmail.com>
> >
> > Add AVR related definitions into QEMU.
> >
> > [AM: Remove word 'Atmel' from filenames and all elements of code]
> > Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >
> > Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> > Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> > Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> > Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > ---
> > arch_init.c | 2 ++
> > include/disas/dis-asm.h | 19 +++++++++++++++++++
> > include/sysemu/arch_init.h | 1 +
> > qapi/machine.json | 3 ++-
> > 4 files changed, 24 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch_init.c b/arch_init.c
> > index 705d0b9..6a74116 100644
> > --- a/arch_init.c
> > +++ b/arch_init.c
> > @@ -89,6 +89,8 @@ int graphic_depth = 32;
> > #define QEMU_ARCH QEMU_ARCH_UNICORE32
> > #elif defined(TARGET_XTENSA)
> > #define QEMU_ARCH QEMU_ARCH_XTENSA
> > +#elif defined(TARGET_AVR)
> > +#define QEMU_ARCH QEMU_ARCH_AVR
> > #endif
> >
> > const uint32_t arch_type = QEMU_ARCH;
> > diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h
> > index f87f468..a36e658 100644
> > --- a/include/disas/dis-asm.h
> > +++ b/include/disas/dis-asm.h
> > @@ -211,6 +211,25 @@ enum bfd_architecture
> > #define bfd_mach_m32r 0 /* backwards compatibility */
> > bfd_arch_mn10200, /* Matsushita MN10200 */
> > bfd_arch_mn10300, /* Matsushita MN10300 */
> > + bfd_arch_avr, /* AVR microcontrollers */
> > +#define bfd_mach_avr1 1
> > +#define bfd_mach_avr2 2
> > +#define bfd_mach_avr25 25
> > +#define bfd_mach_avr3 3
> > +#define bfd_mach_avr31 31
> > +#define bfd_mach_avr35 35
> > +#define bfd_mach_avr4 4
> > +#define bfd_mach_avr5 5
> > +#define bfd_mach_avr51 51
> > +#define bfd_mach_avr6 6
> > +#define bfd_mach_avrtiny 100
> > +#define bfd_mach_avrxmega1 101
> > +#define bfd_mach_avrxmega2 102
> > +#define bfd_mach_avrxmega3 103
> > +#define bfd_mach_avrxmega4 104
> > +#define bfd_mach_avrxmega5 105
> > +#define bfd_mach_avrxmega6 106
> > +#define bfd_mach_avrxmega7 107
>
> I think the changes in include/disas/dis-asm.h should go in patch #6
> "target/avr: Add defintions of AVR core types" where the definitions are
> used:
>
> const char *avr_flags_to_cpu_type(uint32_t flags, const char
> *def_cpu_type)
> {
> switch (flags & EF_AVR_MACH) {
> case bfd_mach_avr1:
> return AVR_CPU_TYPE_NAME("avr1");
>
I agree.
> > bfd_arch_cris, /* Axis CRIS */
> > #define bfd_mach_cris_v0_v10 255
> > #define bfd_mach_cris_v32 32
> > diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
> > index 62c6fe4..893df26 100644
> > --- a/include/sysemu/arch_init.h
> > +++ b/include/sysemu/arch_init.h
> > @@ -24,6 +24,7 @@ enum {
> > QEMU_ARCH_NIOS2 = (1 << 17),
> > QEMU_ARCH_HPPA = (1 << 18),
> > QEMU_ARCH_RISCV = (1 << 19),
> > + QEMU_ARCH_AVR = (1 << 20),
> > };
> >
> > extern const uint32_t arch_type;
> > diff --git a/qapi/machine.json b/qapi/machine.json
> > index b3d30bc..f2dc385 100644
> > --- a/qapi/machine.json
> > +++ b/qapi/machine.json
> > @@ -21,11 +21,12 @@
> > # is true even for "qemu-system-x86_64".
> > #
> > # ppcemb: dropped in 3.1
> > +# avr: since 5.0
> > #
> > # Since: 3.0
> > ##
> > { 'enum' : 'SysEmuTarget',
> > - 'data' : [ 'aarch64', 'alpha', 'arm', 'cris', 'hppa', 'i386', 'lm32',
> > + 'data' : [ 'aarch64', 'alpha', 'arm', 'avr', 'cris', 'hppa', 'i386', 'lm32',
> > 'm68k', 'microblaze', 'microblazeel', 'mips', 'mips64',
> > 'mips64el', 'mipsel', 'moxie', 'nios2', 'or1k', 'ppc',
> > 'ppc64', 'riscv32', 'riscv64', 's390x', 'sh4',
> >
>
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 21/29] target/avr: Add machine none test
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (19 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 20/29] target/avr: Register AVR support with the rest of QEMU Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 22/29] target/avr: Update MAINTAINERS file Aleksandar Markovic
` (9 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Add a single code line that will automatically provide 'machine none'
test.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
tests/qtest/machine-none-test.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/qtest/machine-none-test.c b/tests/qtest/machine-none-test.c
index 5953d31..3e5c74e 100644
--- a/tests/qtest/machine-none-test.c
+++ b/tests/qtest/machine-none-test.c
@@ -27,6 +27,7 @@ static struct arch2cpu cpus_map[] = {
/* tested targets list */
{ "arm", "cortex-a15" },
{ "aarch64", "cortex-a57" },
+ { "avr", "avr6-avr-cpu" },
{ "x86_64", "qemu64,apic-id=0" },
{ "i386", "qemu32,apic-id=0" },
{ "alpha", "ev67" },
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 22/29] target/avr: Update MAINTAINERS file
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (20 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 21/29] target/avr: Add machine none test Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries Aleksandar Markovic
` (8 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Michael Rolnik, Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Include AVR maintaners in MAINTAINERS file
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash ordering fixes from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
MAINTAINERS | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c45e886..d0a114b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -163,6 +163,14 @@ S: Maintained
F: hw/arm/smmu*
F: include/hw/arm/smmu*
+AVR TCG CPUs
+M: Michael Rolnik <mrolnik@gmail.com>
+R: Sarah Harris <S.E.Harris@kent.ac.uk>
+S: Maintained
+F: target/avr/
+F: default-configs/avr-softmmu.mak
+F: gdb-xml/avr-cpu.xml
+
CRIS TCG CPUs
M: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S: Maintained
@@ -882,6 +890,22 @@ F: include/hw/*/nrf51*.h
F: include/hw/*/microbit*.h
F: tests/qtest/microbit-test.c
+AVR Machines
+-------------
+
+AVR MCUs
+M: Michael Rolnik <mrolnik@gmail.com>
+R: Sarah Harris <S.E.Harris@kent.ac.uk>
+S: Maintained
+F: hw/avr/
+F: hw/char/avr_usart.c
+F: include/hw/char/avr_usart.h
+F: hw/timer/avr_timer16.c
+F: include/hw/timer/avr_timer16.h
+F: hw/misc/avr_power.c
+F: include/hw/misc/avr_power.h
+F: tests/acceptance/machine_avr6.py
+
CRIS Machines
-------------
Axis Dev88
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (21 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 22/29] target/avr: Update MAINTAINERS file Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:20 ` Philippe Mathieu-Daudé
2020-01-31 0:03 ` [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers Aleksandar Markovic
` (7 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel; +Cc: Philippe Mathieu-Daudé, Aleksandar Markovic
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add avr_load_firmware() function to load firmware in ELF or
raw binary format.
[AM: Corrected the type of the variable containing e_flags]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
hw/avr/Makefile.objs | 1 +
hw/avr/boot.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/avr/boot.h | 33 +++++++++++++++++++++++
include/elf.h | 2 ++
4 files changed, 110 insertions(+)
create mode 100644 hw/avr/Makefile.objs
create mode 100644 hw/avr/boot.c
create mode 100644 hw/avr/boot.h
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
new file mode 100644
index 0000000..123f174
--- /dev/null
+++ b/hw/avr/Makefile.objs
@@ -0,0 +1 @@
+obj-y += boot.o
diff --git a/hw/avr/boot.c b/hw/avr/boot.c
new file mode 100644
index 0000000..9ac2c88
--- /dev/null
+++ b/hw/avr/boot.c
@@ -0,0 +1,74 @@
+/*
+ * AVR loader helpers
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "hw/loader.h"
+#include "elf.h"
+#include "boot.h"
+#include "qemu/error-report.h"
+
+bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
+ MemoryRegion *mr, const char *firmware)
+{
+ const char *filename;
+ int bytes_loaded;
+ uint64_t entry;
+ uint32_t e_flags;
+
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
+ if (filename == NULL) {
+ error_report("Unable to find %s", firmware);
+ return false;
+ }
+
+ bytes_loaded = load_elf_ram_sym(filename,
+ NULL, NULL, NULL,
+ &entry, NULL, NULL,
+ &e_flags, 0, EM_AVR, 0, 0,
+ NULL, true, NULL);
+ if (bytes_loaded >= 0) {
+ /* If ELF file is provided, determine CPU type reading ELF e_flags. */
+ const char *elf_cpu = avr_flags_to_cpu_type(e_flags, NULL);
+ const char *mcu_cpu_type = object_get_typename(OBJECT(cpu));
+ int cpu_len = strlen(mcu_cpu_type) - strlen(AVR_CPU_TYPE_SUFFIX);
+
+ if (entry) {
+ error_report("BIOS entry_point must be 0x0000 "
+ "(ELF image '%s' has entry_point 0x%04" PRIx64 ")",
+ firmware, entry);
+ return false;
+ }
+ if (!elf_cpu) {
+ warn_report("Could not determine CPU type for ELF image '%s', "
+ "assuming '%.*s' CPU",
+ firmware, cpu_len, mcu_cpu_type);
+ return true;
+ }
+ if (strcmp(elf_cpu, mcu_cpu_type)) {
+ error_report("Current machine: %s with '%.*s' CPU",
+ MACHINE_GET_CLASS(ms)->desc, cpu_len, mcu_cpu_type);
+ error_report("ELF image '%s' is for '%.*s' CPU",
+ firmware,
+ (int)(strlen(elf_cpu) - strlen(AVR_CPU_TYPE_SUFFIX)),
+ elf_cpu);
+ return false;
+ }
+ } else {
+ bytes_loaded = load_image_targphys(filename, OFFSET_CODE,
+ memory_region_size(mr));
+ }
+ if (bytes_loaded < 0) {
+ error_report("Unable to load firmware image %s as ELF or raw binary",
+ firmware);
+ return false;
+ }
+ return true;
+}
diff --git a/hw/avr/boot.h b/hw/avr/boot.h
new file mode 100644
index 0000000..62bc10c
--- /dev/null
+++ b/hw/avr/boot.h
@@ -0,0 +1,33 @@
+/*
+ * AVR loader helpers
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_AVR_BOOT_H
+#define HW_AVR_BOOT_H
+
+#include "hw/boards.h"
+#include "cpu.h"
+
+/**
+ * avr_load_firmware: load an image into a memory region
+ *
+ * @cpu: Handle a AVR CPU object
+ * @ms: A MachineState
+ * @mr: Memory Region to load into
+ * @firmware: Path to the firmware file (raw binary or ELF format)
+ *
+ * Load a firmware supplied by the machine or by the user with the
+ * '-bios' command line option, and put it in target memory.
+ *
+ * Returns: true on success, false on error.
+ */
+bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
+ MemoryRegion *mr, const char *firmware);
+
+#endif
diff --git a/include/elf.h b/include/elf.h
index 8fbfe60..3f08f68 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {
#define EM_MOXIE 223 /* Moxie processor family */
#define EM_MOXIE_OLD 0xFEED
+#define EM_AVR 83 /* AVR 8-bit microcontroller */
+
/* This is the info that is needed to parse the dynamic section of the file */
#define DT_NULL 0
#define DT_NEEDED 1
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries
2020-01-31 0:03 ` [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries Aleksandar Markovic
@ 2020-01-31 0:20 ` Philippe Mathieu-Daudé
2020-01-31 0:26 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 0:20 UTC (permalink / raw)
To: Aleksandar Markovic, qemu-devel
Cc: Philippe Mathieu-Daudé, Aleksandar Markovic
On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
> Add avr_load_firmware() function to load firmware in ELF or
> raw binary format.
>
> [AM: Corrected the type of the variable containing e_flags]
>
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> hw/avr/Makefile.objs | 1 +
> hw/avr/boot.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/avr/boot.h | 33 +++++++++++++++++++++++
> include/elf.h | 2 ++
> 4 files changed, 110 insertions(+)
> create mode 100644 hw/avr/Makefile.objs
> create mode 100644 hw/avr/boot.c
> create mode 100644 hw/avr/boot.h
>
> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> new file mode 100644
> index 0000000..123f174
> --- /dev/null
> +++ b/hw/avr/Makefile.objs
> @@ -0,0 +1 @@
> +obj-y += boot.o
> diff --git a/hw/avr/boot.c b/hw/avr/boot.c
> new file mode 100644
> index 0000000..9ac2c88
> --- /dev/null
> +++ b/hw/avr/boot.c
> @@ -0,0 +1,74 @@
> +/*
> + * AVR loader helpers
> + *
> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> + *
> + * This work is licensed under the terms of the GNU GPLv2 or later.
> + * See the COPYING file in the top-level directory.
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "hw/loader.h"
> +#include "elf.h"
> +#include "boot.h"
> +#include "qemu/error-report.h"
> +
> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> + MemoryRegion *mr, const char *firmware)
> +{
> + const char *filename;
> + int bytes_loaded;
> + uint64_t entry;
> + uint32_t e_flags;
> +
> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
> + if (filename == NULL) {
> + error_report("Unable to find %s", firmware);
> + return false;
> + }
> +
> + bytes_loaded = load_elf_ram_sym(filename,
> + NULL, NULL, NULL,
> + &entry, NULL, NULL,
> + &e_flags, 0, EM_AVR, 0, 0,
> + NULL, true, NULL);
> + if (bytes_loaded >= 0) {
> + /* If ELF file is provided, determine CPU type reading ELF e_flags. */
> + const char *elf_cpu = avr_flags_to_cpu_type(e_flags, NULL);
> + const char *mcu_cpu_type = object_get_typename(OBJECT(cpu));
> + int cpu_len = strlen(mcu_cpu_type) - strlen(AVR_CPU_TYPE_SUFFIX);
> +
> + if (entry) {
> + error_report("BIOS entry_point must be 0x0000 "
> + "(ELF image '%s' has entry_point 0x%04" PRIx64 ")",
> + firmware, entry);
> + return false;
> + }
> + if (!elf_cpu) {
> + warn_report("Could not determine CPU type for ELF image '%s', "
> + "assuming '%.*s' CPU",
> + firmware, cpu_len, mcu_cpu_type);
> + return true;
> + }
> + if (strcmp(elf_cpu, mcu_cpu_type)) {
> + error_report("Current machine: %s with '%.*s' CPU",
> + MACHINE_GET_CLASS(ms)->desc, cpu_len, mcu_cpu_type);
> + error_report("ELF image '%s' is for '%.*s' CPU",
> + firmware,
> + (int)(strlen(elf_cpu) - strlen(AVR_CPU_TYPE_SUFFIX)),
> + elf_cpu);
> + return false;
> + }
> + } else {
> + bytes_loaded = load_image_targphys(filename, OFFSET_CODE,
> + memory_region_size(mr));
> + }
> + if (bytes_loaded < 0) {
> + error_report("Unable to load firmware image %s as ELF or raw binary",
> + firmware);
> + return false;
> + }
> + return true;
> +}
> diff --git a/hw/avr/boot.h b/hw/avr/boot.h
> new file mode 100644
> index 0000000..62bc10c
> --- /dev/null
> +++ b/hw/avr/boot.h
> @@ -0,0 +1,33 @@
> +/*
> + * AVR loader helpers
> + *
> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> + *
> + * This work is licensed under the terms of the GNU GPLv2 or later.
> + * See the COPYING file in the top-level directory.
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef HW_AVR_BOOT_H
> +#define HW_AVR_BOOT_H
> +
> +#include "hw/boards.h"
> +#include "cpu.h"
> +
> +/**
> + * avr_load_firmware: load an image into a memory region
> + *
> + * @cpu: Handle a AVR CPU object
> + * @ms: A MachineState
> + * @mr: Memory Region to load into
> + * @firmware: Path to the firmware file (raw binary or ELF format)
> + *
> + * Load a firmware supplied by the machine or by the user with the
> + * '-bios' command line option, and put it in target memory.
> + *
> + * Returns: true on success, false on error.
> + */
> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> + MemoryRegion *mr, const char *firmware);
> +
> +#endif
> diff --git a/include/elf.h b/include/elf.h
> index 8fbfe60..3f08f68 100644
> --- a/include/elf.h
> +++ b/include/elf.h
> @@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {
> #define EM_MOXIE 223 /* Moxie processor family */
> #define EM_MOXIE_OLD 0xFEED
>
> +#define EM_AVR 83 /* AVR 8-bit microcontroller */
IIRC from previous version you suggested to move this, I suppose between:
#define EM_CRIS 76
#define EM_V850 87
> +
> /* This is the info that is needed to parse the dynamic section of the file */
> #define DT_NULL 0
> #define DT_NEEDED 1
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries
2020-01-31 0:20 ` Philippe Mathieu-Daudé
@ 2020-01-31 0:26 ` Aleksandar Markovic
2020-01-31 0:28 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:26 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, QEMU Developers, Philippe Mathieu-Daudé
On Fri, Jan 31, 2020 at 1:20 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
> > From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >
> > Add avr_load_firmware() function to load firmware in ELF or
> > raw binary format.
> >
> > [AM: Corrected the type of the variable containing e_flags]
> >
> > Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > ---
> > hw/avr/Makefile.objs | 1 +
> > hw/avr/boot.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/avr/boot.h | 33 +++++++++++++++++++++++
> > include/elf.h | 2 ++
> > 4 files changed, 110 insertions(+)
> > create mode 100644 hw/avr/Makefile.objs
> > create mode 100644 hw/avr/boot.c
> > create mode 100644 hw/avr/boot.h
> >
> > diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > new file mode 100644
> > index 0000000..123f174
> > --- /dev/null
> > +++ b/hw/avr/Makefile.objs
> > @@ -0,0 +1 @@
> > +obj-y += boot.o
> > diff --git a/hw/avr/boot.c b/hw/avr/boot.c
> > new file mode 100644
> > index 0000000..9ac2c88
> > --- /dev/null
> > +++ b/hw/avr/boot.c
> > @@ -0,0 +1,74 @@
> > +/*
> > + * AVR loader helpers
> > + *
> > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > + *
> > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > + * See the COPYING file in the top-level directory.
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu-common.h"
> > +#include "hw/loader.h"
> > +#include "elf.h"
> > +#include "boot.h"
> > +#include "qemu/error-report.h"
> > +
> > +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> > + MemoryRegion *mr, const char *firmware)
> > +{
> > + const char *filename;
> > + int bytes_loaded;
> > + uint64_t entry;
> > + uint32_t e_flags;
> > +
> > + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
> > + if (filename == NULL) {
> > + error_report("Unable to find %s", firmware);
> > + return false;
> > + }
> > +
> > + bytes_loaded = load_elf_ram_sym(filename,
> > + NULL, NULL, NULL,
> > + &entry, NULL, NULL,
> > + &e_flags, 0, EM_AVR, 0, 0,
> > + NULL, true, NULL);
> > + if (bytes_loaded >= 0) {
> > + /* If ELF file is provided, determine CPU type reading ELF e_flags. */
> > + const char *elf_cpu = avr_flags_to_cpu_type(e_flags, NULL);
> > + const char *mcu_cpu_type = object_get_typename(OBJECT(cpu));
> > + int cpu_len = strlen(mcu_cpu_type) - strlen(AVR_CPU_TYPE_SUFFIX);
> > +
> > + if (entry) {
> > + error_report("BIOS entry_point must be 0x0000 "
> > + "(ELF image '%s' has entry_point 0x%04" PRIx64 ")",
> > + firmware, entry);
> > + return false;
> > + }
> > + if (!elf_cpu) {
> > + warn_report("Could not determine CPU type for ELF image '%s', "
> > + "assuming '%.*s' CPU",
> > + firmware, cpu_len, mcu_cpu_type);
> > + return true;
> > + }
> > + if (strcmp(elf_cpu, mcu_cpu_type)) {
> > + error_report("Current machine: %s with '%.*s' CPU",
> > + MACHINE_GET_CLASS(ms)->desc, cpu_len, mcu_cpu_type);
> > + error_report("ELF image '%s' is for '%.*s' CPU",
> > + firmware,
> > + (int)(strlen(elf_cpu) - strlen(AVR_CPU_TYPE_SUFFIX)),
> > + elf_cpu);
> > + return false;
> > + }
> > + } else {
> > + bytes_loaded = load_image_targphys(filename, OFFSET_CODE,
> > + memory_region_size(mr));
> > + }
> > + if (bytes_loaded < 0) {
> > + error_report("Unable to load firmware image %s as ELF or raw binary",
> > + firmware);
> > + return false;
> > + }
> > + return true;
> > +}
> > diff --git a/hw/avr/boot.h b/hw/avr/boot.h
> > new file mode 100644
> > index 0000000..62bc10c
> > --- /dev/null
> > +++ b/hw/avr/boot.h
> > @@ -0,0 +1,33 @@
> > +/*
> > + * AVR loader helpers
> > + *
> > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > + *
> > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > + * See the COPYING file in the top-level directory.
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + */
> > +
> > +#ifndef HW_AVR_BOOT_H
> > +#define HW_AVR_BOOT_H
> > +
> > +#include "hw/boards.h"
> > +#include "cpu.h"
> > +
> > +/**
> > + * avr_load_firmware: load an image into a memory region
> > + *
> > + * @cpu: Handle a AVR CPU object
> > + * @ms: A MachineState
> > + * @mr: Memory Region to load into
> > + * @firmware: Path to the firmware file (raw binary or ELF format)
> > + *
> > + * Load a firmware supplied by the machine or by the user with the
> > + * '-bios' command line option, and put it in target memory.
> > + *
> > + * Returns: true on success, false on error.
> > + */
> > +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> > + MemoryRegion *mr, const char *firmware);
> > +
> > +#endif
> > diff --git a/include/elf.h b/include/elf.h
> > index 8fbfe60..3f08f68 100644
> > --- a/include/elf.h
> > +++ b/include/elf.h
> > @@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {
> > #define EM_MOXIE 223 /* Moxie processor family */
> > #define EM_MOXIE_OLD 0xFEED
> >
> > +#define EM_AVR 83 /* AVR 8-bit microcontroller */
>
> IIRC from previous version you suggested to move this, I suppose between:
>
> #define EM_CRIS 76
>
> #define EM_V850 87
>
I forgot about that, thinking about other larger changes.
> > +
> > /* This is the info that is needed to parse the dynamic section of the file */
> > #define DT_NULL 0
> > #define DT_NEEDED 1
> >
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries
2020-01-31 0:26 ` Aleksandar Markovic
@ 2020-01-31 0:28 ` Philippe Mathieu-Daudé
2020-01-31 0:30 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 0:28 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, QEMU Developers, Philippe Mathieu-Daudé
On 1/31/20 1:26 AM, Aleksandar Markovic wrote:
> On Fri, Jan 31, 2020 at 1:20 AM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
>>
>> On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
>>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>>
>>> Add avr_load_firmware() function to load firmware in ELF or
>>> raw binary format.
>>>
>>> [AM: Corrected the type of the variable containing e_flags]
>>>
>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>> ---
>>> hw/avr/Makefile.objs | 1 +
>>> hw/avr/boot.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> hw/avr/boot.h | 33 +++++++++++++++++++++++
>>> include/elf.h | 2 ++
>>> 4 files changed, 110 insertions(+)
>>> create mode 100644 hw/avr/Makefile.objs
>>> create mode 100644 hw/avr/boot.c
>>> create mode 100644 hw/avr/boot.h
>>>
>>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
>>> new file mode 100644
>>> index 0000000..123f174
>>> --- /dev/null
>>> +++ b/hw/avr/Makefile.objs
>>> @@ -0,0 +1 @@
>>> +obj-y += boot.o
>>> diff --git a/hw/avr/boot.c b/hw/avr/boot.c
>>> new file mode 100644
>>> index 0000000..9ac2c88
>>> --- /dev/null
>>> +++ b/hw/avr/boot.c
>>> @@ -0,0 +1,74 @@
>>> +/*
>>> + * AVR loader helpers
>>> + *
>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
>>> + *
>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
>>> + * See the COPYING file in the top-level directory.
>>> + * SPDX-License-Identifier: GPL-2.0-or-later
>>> + */
>>> +
>>> +#include "qemu/osdep.h"
>>> +#include "qemu-common.h"
>>> +#include "hw/loader.h"
>>> +#include "elf.h"
>>> +#include "boot.h"
>>> +#include "qemu/error-report.h"
>>> +
>>> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
>>> + MemoryRegion *mr, const char *firmware)
>>> +{
>>> + const char *filename;
>>> + int bytes_loaded;
>>> + uint64_t entry;
>>> + uint32_t e_flags;
>>> +
>>> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
>>> + if (filename == NULL) {
>>> + error_report("Unable to find %s", firmware);
>>> + return false;
>>> + }
>>> +
>>> + bytes_loaded = load_elf_ram_sym(filename,
>>> + NULL, NULL, NULL,
>>> + &entry, NULL, NULL,
>>> + &e_flags, 0, EM_AVR, 0, 0,
>>> + NULL, true, NULL);
>>> + if (bytes_loaded >= 0) {
>>> + /* If ELF file is provided, determine CPU type reading ELF e_flags. */
>>> + const char *elf_cpu = avr_flags_to_cpu_type(e_flags, NULL);
>>> + const char *mcu_cpu_type = object_get_typename(OBJECT(cpu));
>>> + int cpu_len = strlen(mcu_cpu_type) - strlen(AVR_CPU_TYPE_SUFFIX);
>>> +
>>> + if (entry) {
>>> + error_report("BIOS entry_point must be 0x0000 "
>>> + "(ELF image '%s' has entry_point 0x%04" PRIx64 ")",
>>> + firmware, entry);
>>> + return false;
>>> + }
>>> + if (!elf_cpu) {
>>> + warn_report("Could not determine CPU type for ELF image '%s', "
>>> + "assuming '%.*s' CPU",
>>> + firmware, cpu_len, mcu_cpu_type);
>>> + return true;
>>> + }
>>> + if (strcmp(elf_cpu, mcu_cpu_type)) {
>>> + error_report("Current machine: %s with '%.*s' CPU",
>>> + MACHINE_GET_CLASS(ms)->desc, cpu_len, mcu_cpu_type);
>>> + error_report("ELF image '%s' is for '%.*s' CPU",
>>> + firmware,
>>> + (int)(strlen(elf_cpu) - strlen(AVR_CPU_TYPE_SUFFIX)),
>>> + elf_cpu);
>>> + return false;
>>> + }
>>> + } else {
>>> + bytes_loaded = load_image_targphys(filename, OFFSET_CODE,
>>> + memory_region_size(mr));
>>> + }
>>> + if (bytes_loaded < 0) {
>>> + error_report("Unable to load firmware image %s as ELF or raw binary",
>>> + firmware);
>>> + return false;
>>> + }
>>> + return true;
>>> +}
>>> diff --git a/hw/avr/boot.h b/hw/avr/boot.h
>>> new file mode 100644
>>> index 0000000..62bc10c
>>> --- /dev/null
>>> +++ b/hw/avr/boot.h
>>> @@ -0,0 +1,33 @@
>>> +/*
>>> + * AVR loader helpers
>>> + *
>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
>>> + *
>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
>>> + * See the COPYING file in the top-level directory.
>>> + * SPDX-License-Identifier: GPL-2.0-or-later
>>> + */
>>> +
>>> +#ifndef HW_AVR_BOOT_H
>>> +#define HW_AVR_BOOT_H
>>> +
>>> +#include "hw/boards.h"
>>> +#include "cpu.h"
>>> +
>>> +/**
>>> + * avr_load_firmware: load an image into a memory region
>>> + *
>>> + * @cpu: Handle a AVR CPU object
>>> + * @ms: A MachineState
>>> + * @mr: Memory Region to load into
>>> + * @firmware: Path to the firmware file (raw binary or ELF format)
>>> + *
>>> + * Load a firmware supplied by the machine or by the user with the
>>> + * '-bios' command line option, and put it in target memory.
>>> + *
>>> + * Returns: true on success, false on error.
>>> + */
>>> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
>>> + MemoryRegion *mr, const char *firmware);
>>> +
>>> +#endif
>>> diff --git a/include/elf.h b/include/elf.h
>>> index 8fbfe60..3f08f68 100644
>>> --- a/include/elf.h
>>> +++ b/include/elf.h
>>> @@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {
>>> #define EM_MOXIE 223 /* Moxie processor family */
>>> #define EM_MOXIE_OLD 0xFEED
>>>
>>> +#define EM_AVR 83 /* AVR 8-bit microcontroller */
>>
>> IIRC from previous version you suggested to move this, I suppose between:
>>
>> #define EM_CRIS 76
>>
>> #define EM_V850 87
>>
>
> I forgot about that, thinking about other larger changes.
Anyway looking closer, the definitions are not ordered correctly, so I
think we don't care much. Your call :)
>
>>> +
>>> /* This is the info that is needed to parse the dynamic section of the file */
>>> #define DT_NULL 0
>>> #define DT_NEEDED 1
>>>
>>
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries
2020-01-31 0:28 ` Philippe Mathieu-Daudé
@ 2020-01-31 0:30 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:30 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, QEMU Developers, Philippe Mathieu-Daudé
On Fri, Jan 31, 2020 at 1:28 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 1/31/20 1:26 AM, Aleksandar Markovic wrote:
> > On Fri, Jan 31, 2020 at 1:20 AM Philippe Mathieu-Daudé
> > <philmd@redhat.com> wrote:
> >>
> >> On 1/31/20 1:03 AM, Aleksandar Markovic wrote:
> >>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >>>
> >>> Add avr_load_firmware() function to load firmware in ELF or
> >>> raw binary format.
> >>>
> >>> [AM: Corrected the type of the variable containing e_flags]
> >>>
> >>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>> ---
> >>> hw/avr/Makefile.objs | 1 +
> >>> hw/avr/boot.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>> hw/avr/boot.h | 33 +++++++++++++++++++++++
> >>> include/elf.h | 2 ++
> >>> 4 files changed, 110 insertions(+)
> >>> create mode 100644 hw/avr/Makefile.objs
> >>> create mode 100644 hw/avr/boot.c
> >>> create mode 100644 hw/avr/boot.h
> >>>
> >>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> >>> new file mode 100644
> >>> index 0000000..123f174
> >>> --- /dev/null
> >>> +++ b/hw/avr/Makefile.objs
> >>> @@ -0,0 +1 @@
> >>> +obj-y += boot.o
> >>> diff --git a/hw/avr/boot.c b/hw/avr/boot.c
> >>> new file mode 100644
> >>> index 0000000..9ac2c88
> >>> --- /dev/null
> >>> +++ b/hw/avr/boot.c
> >>> @@ -0,0 +1,74 @@
> >>> +/*
> >>> + * AVR loader helpers
> >>> + *
> >>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> >>> + *
> >>> + * This work is licensed under the terms of the GNU GPLv2 or later.
> >>> + * See the COPYING file in the top-level directory.
> >>> + * SPDX-License-Identifier: GPL-2.0-or-later
> >>> + */
> >>> +
> >>> +#include "qemu/osdep.h"
> >>> +#include "qemu-common.h"
> >>> +#include "hw/loader.h"
> >>> +#include "elf.h"
> >>> +#include "boot.h"
> >>> +#include "qemu/error-report.h"
> >>> +
> >>> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> >>> + MemoryRegion *mr, const char *firmware)
> >>> +{
> >>> + const char *filename;
> >>> + int bytes_loaded;
> >>> + uint64_t entry;
> >>> + uint32_t e_flags;
> >>> +
> >>> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
> >>> + if (filename == NULL) {
> >>> + error_report("Unable to find %s", firmware);
> >>> + return false;
> >>> + }
> >>> +
> >>> + bytes_loaded = load_elf_ram_sym(filename,
> >>> + NULL, NULL, NULL,
> >>> + &entry, NULL, NULL,
> >>> + &e_flags, 0, EM_AVR, 0, 0,
> >>> + NULL, true, NULL);
> >>> + if (bytes_loaded >= 0) {
> >>> + /* If ELF file is provided, determine CPU type reading ELF e_flags. */
> >>> + const char *elf_cpu = avr_flags_to_cpu_type(e_flags, NULL);
> >>> + const char *mcu_cpu_type = object_get_typename(OBJECT(cpu));
> >>> + int cpu_len = strlen(mcu_cpu_type) - strlen(AVR_CPU_TYPE_SUFFIX);
> >>> +
> >>> + if (entry) {
> >>> + error_report("BIOS entry_point must be 0x0000 "
> >>> + "(ELF image '%s' has entry_point 0x%04" PRIx64 ")",
> >>> + firmware, entry);
> >>> + return false;
> >>> + }
> >>> + if (!elf_cpu) {
> >>> + warn_report("Could not determine CPU type for ELF image '%s', "
> >>> + "assuming '%.*s' CPU",
> >>> + firmware, cpu_len, mcu_cpu_type);
> >>> + return true;
> >>> + }
> >>> + if (strcmp(elf_cpu, mcu_cpu_type)) {
> >>> + error_report("Current machine: %s with '%.*s' CPU",
> >>> + MACHINE_GET_CLASS(ms)->desc, cpu_len, mcu_cpu_type);
> >>> + error_report("ELF image '%s' is for '%.*s' CPU",
> >>> + firmware,
> >>> + (int)(strlen(elf_cpu) - strlen(AVR_CPU_TYPE_SUFFIX)),
> >>> + elf_cpu);
> >>> + return false;
> >>> + }
> >>> + } else {
> >>> + bytes_loaded = load_image_targphys(filename, OFFSET_CODE,
> >>> + memory_region_size(mr));
> >>> + }
> >>> + if (bytes_loaded < 0) {
> >>> + error_report("Unable to load firmware image %s as ELF or raw binary",
> >>> + firmware);
> >>> + return false;
> >>> + }
> >>> + return true;
> >>> +}
> >>> diff --git a/hw/avr/boot.h b/hw/avr/boot.h
> >>> new file mode 100644
> >>> index 0000000..62bc10c
> >>> --- /dev/null
> >>> +++ b/hw/avr/boot.h
> >>> @@ -0,0 +1,33 @@
> >>> +/*
> >>> + * AVR loader helpers
> >>> + *
> >>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> >>> + *
> >>> + * This work is licensed under the terms of the GNU GPLv2 or later.
> >>> + * See the COPYING file in the top-level directory.
> >>> + * SPDX-License-Identifier: GPL-2.0-or-later
> >>> + */
> >>> +
> >>> +#ifndef HW_AVR_BOOT_H
> >>> +#define HW_AVR_BOOT_H
> >>> +
> >>> +#include "hw/boards.h"
> >>> +#include "cpu.h"
> >>> +
> >>> +/**
> >>> + * avr_load_firmware: load an image into a memory region
> >>> + *
> >>> + * @cpu: Handle a AVR CPU object
> >>> + * @ms: A MachineState
> >>> + * @mr: Memory Region to load into
> >>> + * @firmware: Path to the firmware file (raw binary or ELF format)
> >>> + *
> >>> + * Load a firmware supplied by the machine or by the user with the
> >>> + * '-bios' command line option, and put it in target memory.
> >>> + *
> >>> + * Returns: true on success, false on error.
> >>> + */
> >>> +bool avr_load_firmware(AVRCPU *cpu, MachineState *ms,
> >>> + MemoryRegion *mr, const char *firmware);
> >>> +
> >>> +#endif
> >>> diff --git a/include/elf.h b/include/elf.h
> >>> index 8fbfe60..3f08f68 100644
> >>> --- a/include/elf.h
> >>> +++ b/include/elf.h
> >>> @@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {
> >>> #define EM_MOXIE 223 /* Moxie processor family */
> >>> #define EM_MOXIE_OLD 0xFEED
> >>>
> >>> +#define EM_AVR 83 /* AVR 8-bit microcontroller */
> >>
> >> IIRC from previous version you suggested to move this, I suppose between:
> >>
> >> #define EM_CRIS 76
> >>
> >> #define EM_V850 87
> >>
> >
> > I forgot about that, thinking about other larger changes.
>
> Anyway looking closer, the definitions are not ordered correctly, so I
> think we don't care much. Your call :)
>
Let's not add more mess to the mess. :)
> >
> >>> +
> >>> /* This is the info that is needed to parse the dynamic section of the file */
> >>> #define DT_NULL 0
> >>> #define DT_NEEDED 1
> >>>
> >>
> >
>
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (22 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 1:56 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 25/29] hw/avr: Add some Arduino boards Aleksandar Markovic
` (6 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Philippe Mathieu-Daudé, Aleksandar Markovic
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add some AVR microcontrollers from the ATmega family:
- middle range: ATmega168 and ATmega328
- high range: ATmega1280 and ATmega2560
For product comparison:
https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
hw/avr/Kconfig | 5 +
hw/avr/Makefile.objs | 1 +
hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
hw/avr/atmega.h | 48 ++++++
4 files changed, 524 insertions(+)
create mode 100644 hw/avr/Kconfig
create mode 100644 hw/avr/atmega.c
create mode 100644 hw/avr/atmega.h
diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
new file mode 100644
index 0000000..9e6527e
--- /dev/null
+++ b/hw/avr/Kconfig
@@ -0,0 +1,5 @@
+config AVR_ATMEGA_MCU
+ bool
+ select AVR_TIMER16
+ select AVR_USART
+ select AVR_POWER
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
index 123f174..af0fdde 100644
--- a/hw/avr/Makefile.objs
+++ b/hw/avr/Makefile.objs
@@ -1 +1,2 @@
obj-y += boot.o
+obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
new file mode 100644
index 0000000..8cdf28b
--- /dev/null
+++ b/hw/avr/atmega.c
@@ -0,0 +1,470 @@
+/*
+ * QEMU ATmega MCU
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "exec/memory.h"
+#include "exec/address-spaces.h"
+#include "sysemu/sysemu.h"
+#include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
+#include "hw/boards.h" /* FIXME memory_region_allocate_system_memory for sram */
+#include "hw/misc/unimp.h"
+#include "atmega.h"
+
+enum AtmegaPeripheral {
+ POWER0, POWER1,
+ GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF,
+ GPIOG, GPIOH, GPIOI, GPIOJ, GPIOK, GPIOL,
+ USART0, USART1, USART2, USART3,
+ TIMER0, TIMER1, TIMER2, TIMER3, TIMER4, TIMER5,
+ PERIFMAX
+};
+
+#define GPIO(n) (n + GPIOA)
+#define USART(n) (n + USART0)
+#define TIMER(n) (n + TIMER0)
+#define POWER(n) (n + POWER0)
+
+typedef struct {
+ uint16_t addr;
+ enum AtmegaPeripheral power_index;
+ uint8_t power_bit;
+ /* timer specific */
+ uint16_t intmask_addr;
+ uint16_t intflag_addr;
+ bool is_timer16;
+} peripheral_cfg;
+
+typedef struct AtmegaMcuClass {
+ /*< private >*/
+ SysBusDeviceClass parent_class;
+ /*< public >*/
+ const char *uc_name;
+ const char *cpu_type;
+ size_t flash_size;
+ size_t eeprom_size;
+ size_t sram_size;
+ size_t io_size;
+ size_t gpio_count;
+ size_t adc_count;
+ const uint8_t *irq;
+ const peripheral_cfg *dev;
+} AtmegaMcuClass;
+
+#define ATMEGA_MCU_CLASS(klass) \
+ OBJECT_CLASS_CHECK(AtmegaMcuClass, (klass), TYPE_ATMEGA_MCU)
+#define ATMEGA_MCU_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(AtmegaMcuClass, (obj), TYPE_ATMEGA_MCU)
+
+static const peripheral_cfg dev168_328[PERIFMAX] = {
+ [USART0] = { 0xc0, POWER0, 1 },
+ [TIMER2] = { 0xb0, POWER0, 6, 0x70, 0x37, false },
+ [TIMER1] = { 0x80, POWER0, 3, 0x6f, 0x36, true },
+ [POWER0] = { 0x64 },
+ [TIMER0] = { 0x44, POWER0, 5, 0x6e, 0x35, false },
+ [GPIOD] = { 0x29 },
+ [GPIOC] = { 0x26 },
+ [GPIOB] = { 0x23 },
+}, dev1280_2560[PERIFMAX] = {
+ [USART3] = { 0x130, POWER1, 2 },
+ [TIMER5] = { 0x120, POWER1, 5, 0x73, 0x3a, true },
+ [GPIOL] = { 0x109 },
+ [GPIOK] = { 0x106 },
+ [GPIOJ] = { 0x103 },
+ [GPIOH] = { 0x100 },
+ [USART2] = { 0xd0, POWER1, 1 },
+ [USART1] = { 0xc8, POWER1, 0 },
+ [USART0] = { 0xc0, POWER0, 1 },
+ [TIMER2] = { 0xb0, POWER0, 6, 0x70, 0x37, false }, /* TODO async */
+ [TIMER4] = { 0xa0, POWER1, 4, 0x72, 0x39, true },
+ [TIMER3] = { 0x90, POWER1, 3, 0x71, 0x38, true },
+ [TIMER1] = { 0x80, POWER0, 3, 0x6f, 0x36, true },
+ [POWER1] = { 0x65 },
+ [POWER0] = { 0x64 },
+ [TIMER0] = { 0x44, POWER0, 5, 0x6e, 0x35, false },
+ [GPIOG] = { 0x32 },
+ [GPIOF] = { 0x2f },
+ [GPIOE] = { 0x2c },
+ [GPIOD] = { 0x29 },
+ [GPIOC] = { 0x26 },
+ [GPIOB] = { 0x23 },
+ [GPIOA] = { 0x20 },
+};
+
+enum AtmegaIrq {
+ USART0_RXC_IRQ, USART0_DRE_IRQ, USART0_TXC_IRQ,
+ USART1_RXC_IRQ, USART1_DRE_IRQ, USART1_TXC_IRQ,
+ USART2_RXC_IRQ, USART2_DRE_IRQ, USART2_TXC_IRQ,
+ USART3_RXC_IRQ, USART3_DRE_IRQ, USART3_TXC_IRQ,
+ TIMER0_CAPT_IRQ, TIMER0_COMPA_IRQ, TIMER0_COMPB_IRQ,
+ TIMER0_COMPC_IRQ, TIMER0_OVF_IRQ,
+ TIMER1_CAPT_IRQ, TIMER1_COMPA_IRQ, TIMER1_COMPB_IRQ,
+ TIMER1_COMPC_IRQ, TIMER1_OVF_IRQ,
+ TIMER2_CAPT_IRQ, TIMER2_COMPA_IRQ, TIMER2_COMPB_IRQ,
+ TIMER2_COMPC_IRQ, TIMER2_OVF_IRQ,
+ TIMER3_CAPT_IRQ, TIMER3_COMPA_IRQ, TIMER3_COMPB_IRQ,
+ TIMER3_COMPC_IRQ, TIMER3_OVF_IRQ,
+ TIMER4_CAPT_IRQ, TIMER4_COMPA_IRQ, TIMER4_COMPB_IRQ,
+ TIMER4_COMPC_IRQ, TIMER4_OVF_IRQ,
+ TIMER5_CAPT_IRQ, TIMER5_COMPA_IRQ, TIMER5_COMPB_IRQ,
+ TIMER5_COMPC_IRQ, TIMER5_OVF_IRQ,
+ IRQ_COUNT
+};
+
+#define USART_IRQ_COUNT 3
+#define USART_RXC_IRQ(n) (n * USART_IRQ_COUNT + USART0_RXC_IRQ)
+#define USART_DRE_IRQ(n) (n * USART_IRQ_COUNT + USART0_DRE_IRQ)
+#define USART_TXC_IRQ(n) (n * USART_IRQ_COUNT + USART0_TXC_IRQ)
+#define TIMER_IRQ_COUNT 5
+#define TIMER_CAPT_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_CAPT_IRQ)
+#define TIMER_COMPA_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPA_IRQ)
+#define TIMER_COMPB_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPB_IRQ)
+#define TIMER_COMPC_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPC_IRQ)
+#define TIMER_OVF_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_OVF_IRQ)
+
+static const uint8_t irq168_328[IRQ_COUNT] = {
+ [TIMER2_COMPA_IRQ] = 8,
+ [TIMER2_COMPB_IRQ] = 9,
+ [TIMER2_OVF_IRQ] = 10,
+ [TIMER1_CAPT_IRQ] = 11,
+ [TIMER1_COMPA_IRQ] = 12,
+ [TIMER1_COMPB_IRQ] = 13,
+ [TIMER1_OVF_IRQ] = 14,
+ [TIMER0_COMPA_IRQ] = 15,
+ [TIMER0_COMPB_IRQ] = 16,
+ [TIMER0_OVF_IRQ] = 17,
+ [USART0_RXC_IRQ] = 19,
+ [USART0_DRE_IRQ] = 20,
+ [USART0_TXC_IRQ] = 21,
+}, irq1280_2560[IRQ_COUNT] = {
+ [TIMER2_COMPA_IRQ] = 14,
+ [TIMER2_COMPB_IRQ] = 15,
+ [TIMER2_OVF_IRQ] = 16,
+ [TIMER1_CAPT_IRQ] = 17,
+ [TIMER1_COMPA_IRQ] = 18,
+ [TIMER1_COMPB_IRQ] = 19,
+ [TIMER1_COMPC_IRQ] = 20,
+ [TIMER1_OVF_IRQ] = 21,
+ [TIMER0_COMPA_IRQ] = 22,
+ [TIMER0_COMPB_IRQ] = 23,
+ [TIMER0_OVF_IRQ] = 24,
+ [USART0_RXC_IRQ] = 26,
+ [USART0_DRE_IRQ] = 27,
+ [USART0_TXC_IRQ] = 28,
+ [TIMER3_CAPT_IRQ] = 32,
+ [TIMER3_COMPA_IRQ] = 33,
+ [TIMER3_COMPB_IRQ] = 34,
+ [TIMER3_COMPC_IRQ] = 35,
+ [TIMER3_OVF_IRQ] = 36,
+ [USART1_RXC_IRQ] = 37,
+ [USART1_DRE_IRQ] = 38,
+ [USART1_TXC_IRQ] = 39,
+ [TIMER4_CAPT_IRQ] = 42,
+ [TIMER4_COMPA_IRQ] = 43,
+ [TIMER4_COMPB_IRQ] = 44,
+ [TIMER4_COMPC_IRQ] = 45,
+ [TIMER4_OVF_IRQ] = 46,
+ [TIMER5_CAPT_IRQ] = 47,
+ [TIMER5_COMPA_IRQ] = 48,
+ [TIMER5_COMPB_IRQ] = 49,
+ [TIMER5_COMPC_IRQ] = 50,
+ [TIMER5_OVF_IRQ] = 51,
+ [USART2_RXC_IRQ] = 52,
+ [USART2_DRE_IRQ] = 53,
+ [USART2_TXC_IRQ] = 54,
+ [USART3_RXC_IRQ] = 55,
+ [USART3_DRE_IRQ] = 56,
+ [USART3_TXC_IRQ] = 57,
+};
+
+static void connect_peripheral_irq(const AtmegaMcuClass *mc,
+ SysBusDevice *sbd,
+ DeviceState *dev, int n,
+ unsigned peripheral_irq)
+{
+ int irq = mc->irq[peripheral_irq];
+
+ if (!irq) {
+ return;
+ }
+ /* FIXME move that to avr_cpu_set_int() once 'sample' board is removed */
+ assert(irq >= 2);
+ irq -= 2;
+
+ sysbus_connect_irq(sbd, n, qdev_get_gpio_in(dev, irq));
+}
+
+static void connect_power_reduction_gpio(AtmegaMcuState *s,
+ const AtmegaMcuClass *mc,
+ DeviceState *dev,
+ int peripheral_index)
+{
+ unsigned power_index = mc->dev[peripheral_index].power_index;
+ assert(mc->dev[power_index].addr);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwr[power_index - POWER0]),
+ mc->dev[peripheral_index].power_bit,
+ qdev_get_gpio_in(dev, 0));
+}
+
+static void atmega_realize(DeviceState *dev, Error **errp)
+{
+ AtmegaMcuState *s = ATMEGA_MCU(dev);
+ const AtmegaMcuClass *mc = ATMEGA_MCU_GET_CLASS(dev);
+ DeviceState *cpudev;
+ SysBusDevice *sbd;
+ Error *err = NULL;
+ char *devname;
+ size_t i;
+
+ assert(mc->io_size <= 0x200);
+
+ if (!s->xtal_freq_hz) {
+ error_setg(errp, "\"xtal-frequency-hz\" property must be provided.");
+ return;
+ }
+
+ /* CPU */
+ object_initialize_child(OBJECT(dev), "cpu", &s->cpu, sizeof(s->cpu),
+ mc->cpu_type, &err, NULL);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ object_property_set_bool(OBJECT(&s->cpu), true, "realized", &error_abort);
+ cpudev = DEVICE(&s->cpu);
+
+ /* SRAM */
+ memory_region_init_ram(&s->sram, OBJECT(dev), "sram", mc->sram_size,
+ &error_abort);
+ memory_region_add_subregion(get_system_memory(),
+ OFFSET_DATA + mc->io_size, &s->sram);
+
+ /* Flash */
+ memory_region_init_rom(&s->flash, OBJECT(dev),
+ "flash", mc->flash_size, &error_fatal);
+ memory_region_add_subregion(get_system_memory(), OFFSET_CODE, &s->flash);
+
+ /*
+ * I/O
+ *
+ * 0x00 - 0x1f: Registers
+ * 0x20 - 0x5f: I/O memory
+ * 0x60 - 0xff: Extended I/O
+ */
+ s->io = qdev_create(NULL, TYPE_UNIMPLEMENTED_DEVICE);
+ qdev_prop_set_string(s->io, "name", "I/O");
+ qdev_prop_set_uint64(s->io, "size", mc->io_size);
+ qdev_init_nofail(s->io);
+ sysbus_mmio_map_overlap(SYS_BUS_DEVICE(s->io), 0, OFFSET_DATA, -1234);
+
+ /* Power Reduction */
+ for (i = 0; i < POWER_MAX; i++) {
+ int idx = POWER(i);
+ if (!mc->dev[idx].addr) {
+ continue;
+ }
+ devname = g_strdup_printf("power%zu", i);
+ object_initialize_child(OBJECT(dev), devname,
+ &s->pwr[i], sizeof(s->pwr[i]),
+ TYPE_AVR_MASK, &error_abort, NULL);
+ object_property_set_bool(OBJECT(&s->pwr[i]), true, "realized",
+ &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwr[i]), 0,
+ OFFSET_DATA + mc->dev[idx].addr);
+ g_free(devname);
+ }
+
+ /* GPIO */
+ for (i = 0; i < GPIO_MAX; i++) {
+ int idx = GPIO(i);
+ if (!mc->dev[idx].addr) {
+ continue;
+ }
+ devname = g_strdup_printf("avr-gpio-%c", 'a' + (char)i);
+ create_unimplemented_device(devname,
+ OFFSET_DATA + mc->dev[idx].addr, 3);
+ g_free(devname);
+ }
+
+ /* USART */
+ for (i = 0; i < USART_MAX; i++) {
+ int idx = USART(i);
+ if (!mc->dev[idx].addr) {
+ continue;
+ }
+ devname = g_strdup_printf("usart%zu", i);
+ object_initialize_child(OBJECT(dev), devname,
+ &s->usart[i], sizeof(s->usart[i]),
+ TYPE_AVR_USART, &error_abort, NULL);
+ qdev_prop_set_chr(DEVICE(&s->usart[i]), "chardev", serial_hd(i));
+ object_property_set_bool(OBJECT(&s->usart[i]), true, "realized",
+ &error_abort);
+ sbd = SYS_BUS_DEVICE(&s->usart[i]);
+ sysbus_mmio_map(sbd, 0, OFFSET_DATA + mc->dev[USART(i)].addr);
+ connect_peripheral_irq(mc, sbd, cpudev, 0, USART_RXC_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 1, USART_DRE_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 2, USART_TXC_IRQ(i));
+ connect_power_reduction_gpio(s, mc, DEVICE(&s->usart[i]), idx);
+ g_free(devname);
+ }
+
+ /* Timer */
+ for (i = 0; i < TIMER_MAX; i++) {
+ int idx = TIMER(i);
+ if (!mc->dev[idx].addr) {
+ continue;
+ }
+ if (!mc->dev[idx].is_timer16) {
+ create_unimplemented_device("avr-timer8",
+ OFFSET_DATA + mc->dev[idx].addr, 5);
+ create_unimplemented_device("avr-timer8-intmask",
+ OFFSET_DATA
+ + mc->dev[idx].intmask_addr, 1);
+ create_unimplemented_device("avr-timer8-intflag",
+ OFFSET_DATA
+ + mc->dev[idx].intflag_addr, 1);
+ continue;
+ }
+ devname = g_strdup_printf("timer%zu", i);
+ object_initialize_child(OBJECT(dev), devname,
+ &s->timer[i], sizeof(s->timer[i]),
+ TYPE_AVR_TIMER16, &error_abort, NULL);
+ object_property_set_uint(OBJECT(&s->timer[i]), s->xtal_freq_hz,
+ "cpu-frequency-hz", &error_abort);
+ object_property_set_bool(OBJECT(&s->timer[i]), true, "realized",
+ &error_abort);
+ sbd = SYS_BUS_DEVICE(&s->timer[i]);
+ sysbus_mmio_map(sbd, 0, OFFSET_DATA + mc->dev[idx].addr);
+ sysbus_mmio_map(sbd, 1, OFFSET_DATA + mc->dev[idx].intmask_addr);
+ sysbus_mmio_map(sbd, 2, OFFSET_DATA + mc->dev[idx].intflag_addr);
+ connect_peripheral_irq(mc, sbd, cpudev, 0, TIMER_CAPT_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 1, TIMER_COMPA_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 2, TIMER_COMPB_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 3, TIMER_COMPC_IRQ(i));
+ connect_peripheral_irq(mc, sbd, cpudev, 4, TIMER_OVF_IRQ(i));
+ connect_power_reduction_gpio(s, mc, DEVICE(&s->timer[i]), idx);
+ g_free(devname);
+ }
+
+ create_unimplemented_device("avr-twi", OFFSET_DATA + 0x0b8, 6);
+ create_unimplemented_device("avr-adc", OFFSET_DATA + 0x078, 8);
+ create_unimplemented_device("avr-ext-mem-ctrl", OFFSET_DATA + 0x074, 2);
+ create_unimplemented_device("avr-watchdog", OFFSET_DATA + 0x060, 1);
+ create_unimplemented_device("avr-spi", OFFSET_DATA + 0x04c, 3);
+ create_unimplemented_device("avr-eeprom", OFFSET_DATA + 0x03f, 3);
+}
+
+static Property atmega_props[] = {
+ DEFINE_PROP_UINT64("xtal-frequency-hz", AtmegaMcuState,
+ xtal_freq_hz, 0),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void atmega_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = atmega_realize;
+ device_class_set_props(dc, atmega_props);
+ /* Reason: Mapped at fixed location on the system bus */
+ dc->user_creatable = false;
+}
+
+static void atmega168_class_init(ObjectClass *oc, void *data)
+{
+ AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
+
+ amc->cpu_type = AVR_CPU_TYPE_NAME("avr5");
+ amc->flash_size = 16 * KiB;
+ amc->eeprom_size = 512;
+ amc->sram_size = 1 * KiB;
+ amc->io_size = 256;
+ amc->gpio_count = 23;
+ amc->adc_count = 6;
+ amc->irq = irq168_328;
+ amc->dev = dev168_328;
+};
+
+static void atmega328_class_init(ObjectClass *oc, void *data)
+{
+ AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
+
+ amc->cpu_type = AVR_CPU_TYPE_NAME("avr5");
+ amc->flash_size = 32 * KiB;
+ amc->eeprom_size = 1 * KiB;
+ amc->sram_size = 2 * KiB;
+ amc->io_size = 256;
+ amc->gpio_count = 23;
+ amc->adc_count = 6;
+ amc->irq = irq168_328;
+ amc->dev = dev168_328;
+};
+
+static void atmega1280_class_init(ObjectClass *oc, void *data)
+{
+ AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
+
+ amc->cpu_type = AVR_CPU_TYPE_NAME("avr6");
+ amc->flash_size = 128 * KiB;
+ amc->eeprom_size = 4 * KiB;
+ amc->sram_size = 8 * KiB;
+ amc->io_size = 512;
+ amc->gpio_count = 86;
+ amc->adc_count = 16;
+ amc->irq = irq1280_2560;
+ amc->dev = dev1280_2560;
+};
+
+static void atmega2560_class_init(ObjectClass *oc, void *data)
+{
+ AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
+
+ amc->cpu_type = AVR_CPU_TYPE_NAME("avr6");
+ amc->flash_size = 256 * KiB;
+ amc->eeprom_size = 4 * KiB;
+ amc->sram_size = 8 * KiB;
+ amc->io_size = 512;
+ amc->gpio_count = 54;
+ amc->adc_count = 16;
+ amc->irq = irq1280_2560;
+ amc->dev = dev1280_2560;
+};
+
+static const TypeInfo atmega_mcu_types[] = {
+ {
+ .name = TYPE_ATMEGA168_MCU,
+ .parent = TYPE_ATMEGA_MCU,
+ .class_init = atmega168_class_init,
+ }, {
+ .name = TYPE_ATMEGA328_MCU,
+ .parent = TYPE_ATMEGA_MCU,
+ .class_init = atmega328_class_init,
+ }, {
+ .name = TYPE_ATMEGA1280_MCU,
+ .parent = TYPE_ATMEGA_MCU,
+ .class_init = atmega1280_class_init,
+ }, {
+ .name = TYPE_ATMEGA2560_MCU,
+ .parent = TYPE_ATMEGA_MCU,
+ .class_init = atmega2560_class_init,
+ }, {
+ .name = TYPE_ATMEGA_MCU,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AtmegaMcuState),
+ .class_size = sizeof(AtmegaMcuClass),
+ .class_init = atmega_class_init,
+ .abstract = true,
+ }
+};
+
+DEFINE_TYPES(atmega_mcu_types)
diff --git a/hw/avr/atmega.h b/hw/avr/atmega.h
new file mode 100644
index 0000000..1cfbb6b
--- /dev/null
+++ b/hw/avr/atmega.h
@@ -0,0 +1,48 @@
+/*
+ * QEMU ATmega MCU
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_AVR_ATMEGA_H
+#define HW_AVR_ATMEGA_H
+
+#include "hw/char/avr_usart.h"
+#include "hw/timer/avr_timer16.h"
+#include "hw/misc/avr_power.h"
+#include "target/avr/cpu.h"
+
+#define TYPE_ATMEGA_MCU "ATmega"
+#define TYPE_ATMEGA168_MCU "ATmega168"
+#define TYPE_ATMEGA328_MCU "ATmega328"
+#define TYPE_ATMEGA1280_MCU "ATmega1280"
+#define TYPE_ATMEGA2560_MCU "ATmega2560"
+
+#define ATMEGA_MCU(obj) OBJECT_CHECK(AtmegaMcuState, (obj), TYPE_ATMEGA_MCU)
+
+#define POWER_MAX 2
+#define USART_MAX 4
+#define TIMER_MAX 6
+#define GPIO_MAX 12
+
+typedef struct AtmegaMcuState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+ /*< public >*/
+
+ AVRCPU cpu;
+ MemoryRegion flash;
+ MemoryRegion eeprom;
+ MemoryRegion sram;
+ DeviceState *io;
+ AVRMaskState pwr[POWER_MAX];
+ AVRUsartState usart[USART_MAX];
+ AVRTimer16State timer[TIMER_MAX];
+ uint64_t xtal_freq_hz;
+} AtmegaMcuState;
+
+#endif /* HW_AVR_ATMEGA_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 0:03 ` [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers Aleksandar Markovic
@ 2020-01-31 1:56 ` Aleksandar Markovic
2020-01-31 3:09 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 1:56 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Richard Henderson, QEMU Developers, Philippe Mathieu-Daudé
On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
<aleksandar.markovic@rt-rk.com> wrote:
>
> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
> Add some AVR microcontrollers from the ATmega family:
>
> - middle range: ATmega168 and ATmega328
> - high range: ATmega1280 and ATmega2560
>
> For product comparison:
> https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
>
> Datasheets:
> http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
>
> [AM: Remove word 'Atmel' from filenames and all elements of code]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> hw/avr/Kconfig | 5 +
> hw/avr/Makefile.objs | 1 +
> hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/avr/atmega.h | 48 ++++++
> 4 files changed, 524 insertions(+)
> create mode 100644 hw/avr/Kconfig
> create mode 100644 hw/avr/atmega.c
> create mode 100644 hw/avr/atmega.h
>
> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> new file mode 100644
> index 0000000..9e6527e
> --- /dev/null
> +++ b/hw/avr/Kconfig
> @@ -0,0 +1,5 @@
> +config AVR_ATMEGA_MCU
> + bool
> + select AVR_TIMER16
> + select AVR_USART
> + select AVR_POWER
> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> index 123f174..af0fdde 100644
> --- a/hw/avr/Makefile.objs
> +++ b/hw/avr/Makefile.objs
> @@ -1 +1,2 @@
> obj-y += boot.o
> +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> new file mode 100644
> index 0000000..8cdf28b
> --- /dev/null
> +++ b/hw/avr/atmega.c
> @@ -0,0 +1,470 @@
> +/*
> + * QEMU ATmega MCU
> + *
> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> + *
> + * This work is licensed under the terms of the GNU GPLv2 or later.
> + * See the COPYING file in the top-level directory.
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
Philippe,
Michael and I already agreed at some moment that the whole target AVR
should have harmonized licenses, and Sarrah agreed to change her
license to achieve this. Do you agree to harmonize your licenses with
the rest of the project? (This would mean changing the preable, but of
course you remain copyright carrier as is now.)
Thanks,
Aleksandar
> +
> +#include "qemu/osdep.h"
> +#include "qemu/module.h"
> +#include "qemu/units.h"
> +#include "qapi/error.h"
> +#include "exec/memory.h"
> +#include "exec/address-spaces.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/sysbus.h"
> +#include "hw/boards.h" /* FIXME memory_region_allocate_system_memory for sram */
> +#include "hw/misc/unimp.h"
> +#include "atmega.h"
> +
> +enum AtmegaPeripheral {
> + POWER0, POWER1,
> + GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF,
> + GPIOG, GPIOH, GPIOI, GPIOJ, GPIOK, GPIOL,
> + USART0, USART1, USART2, USART3,
> + TIMER0, TIMER1, TIMER2, TIMER3, TIMER4, TIMER5,
> + PERIFMAX
> +};
> +
> +#define GPIO(n) (n + GPIOA)
> +#define USART(n) (n + USART0)
> +#define TIMER(n) (n + TIMER0)
> +#define POWER(n) (n + POWER0)
> +
> +typedef struct {
> + uint16_t addr;
> + enum AtmegaPeripheral power_index;
> + uint8_t power_bit;
> + /* timer specific */
> + uint16_t intmask_addr;
> + uint16_t intflag_addr;
> + bool is_timer16;
> +} peripheral_cfg;
> +
> +typedef struct AtmegaMcuClass {
> + /*< private >*/
> + SysBusDeviceClass parent_class;
> + /*< public >*/
> + const char *uc_name;
> + const char *cpu_type;
> + size_t flash_size;
> + size_t eeprom_size;
> + size_t sram_size;
> + size_t io_size;
> + size_t gpio_count;
> + size_t adc_count;
> + const uint8_t *irq;
> + const peripheral_cfg *dev;
> +} AtmegaMcuClass;
> +
> +#define ATMEGA_MCU_CLASS(klass) \
> + OBJECT_CLASS_CHECK(AtmegaMcuClass, (klass), TYPE_ATMEGA_MCU)
> +#define ATMEGA_MCU_GET_CLASS(obj) \
> + OBJECT_GET_CLASS(AtmegaMcuClass, (obj), TYPE_ATMEGA_MCU)
> +
> +static const peripheral_cfg dev168_328[PERIFMAX] = {
> + [USART0] = { 0xc0, POWER0, 1 },
> + [TIMER2] = { 0xb0, POWER0, 6, 0x70, 0x37, false },
> + [TIMER1] = { 0x80, POWER0, 3, 0x6f, 0x36, true },
> + [POWER0] = { 0x64 },
> + [TIMER0] = { 0x44, POWER0, 5, 0x6e, 0x35, false },
> + [GPIOD] = { 0x29 },
> + [GPIOC] = { 0x26 },
> + [GPIOB] = { 0x23 },
> +}, dev1280_2560[PERIFMAX] = {
> + [USART3] = { 0x130, POWER1, 2 },
> + [TIMER5] = { 0x120, POWER1, 5, 0x73, 0x3a, true },
> + [GPIOL] = { 0x109 },
> + [GPIOK] = { 0x106 },
> + [GPIOJ] = { 0x103 },
> + [GPIOH] = { 0x100 },
> + [USART2] = { 0xd0, POWER1, 1 },
> + [USART1] = { 0xc8, POWER1, 0 },
> + [USART0] = { 0xc0, POWER0, 1 },
> + [TIMER2] = { 0xb0, POWER0, 6, 0x70, 0x37, false }, /* TODO async */
> + [TIMER4] = { 0xa0, POWER1, 4, 0x72, 0x39, true },
> + [TIMER3] = { 0x90, POWER1, 3, 0x71, 0x38, true },
> + [TIMER1] = { 0x80, POWER0, 3, 0x6f, 0x36, true },
> + [POWER1] = { 0x65 },
> + [POWER0] = { 0x64 },
> + [TIMER0] = { 0x44, POWER0, 5, 0x6e, 0x35, false },
> + [GPIOG] = { 0x32 },
> + [GPIOF] = { 0x2f },
> + [GPIOE] = { 0x2c },
> + [GPIOD] = { 0x29 },
> + [GPIOC] = { 0x26 },
> + [GPIOB] = { 0x23 },
> + [GPIOA] = { 0x20 },
> +};
> +
> +enum AtmegaIrq {
> + USART0_RXC_IRQ, USART0_DRE_IRQ, USART0_TXC_IRQ,
> + USART1_RXC_IRQ, USART1_DRE_IRQ, USART1_TXC_IRQ,
> + USART2_RXC_IRQ, USART2_DRE_IRQ, USART2_TXC_IRQ,
> + USART3_RXC_IRQ, USART3_DRE_IRQ, USART3_TXC_IRQ,
> + TIMER0_CAPT_IRQ, TIMER0_COMPA_IRQ, TIMER0_COMPB_IRQ,
> + TIMER0_COMPC_IRQ, TIMER0_OVF_IRQ,
> + TIMER1_CAPT_IRQ, TIMER1_COMPA_IRQ, TIMER1_COMPB_IRQ,
> + TIMER1_COMPC_IRQ, TIMER1_OVF_IRQ,
> + TIMER2_CAPT_IRQ, TIMER2_COMPA_IRQ, TIMER2_COMPB_IRQ,
> + TIMER2_COMPC_IRQ, TIMER2_OVF_IRQ,
> + TIMER3_CAPT_IRQ, TIMER3_COMPA_IRQ, TIMER3_COMPB_IRQ,
> + TIMER3_COMPC_IRQ, TIMER3_OVF_IRQ,
> + TIMER4_CAPT_IRQ, TIMER4_COMPA_IRQ, TIMER4_COMPB_IRQ,
> + TIMER4_COMPC_IRQ, TIMER4_OVF_IRQ,
> + TIMER5_CAPT_IRQ, TIMER5_COMPA_IRQ, TIMER5_COMPB_IRQ,
> + TIMER5_COMPC_IRQ, TIMER5_OVF_IRQ,
> + IRQ_COUNT
> +};
> +
> +#define USART_IRQ_COUNT 3
> +#define USART_RXC_IRQ(n) (n * USART_IRQ_COUNT + USART0_RXC_IRQ)
> +#define USART_DRE_IRQ(n) (n * USART_IRQ_COUNT + USART0_DRE_IRQ)
> +#define USART_TXC_IRQ(n) (n * USART_IRQ_COUNT + USART0_TXC_IRQ)
> +#define TIMER_IRQ_COUNT 5
> +#define TIMER_CAPT_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_CAPT_IRQ)
> +#define TIMER_COMPA_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPA_IRQ)
> +#define TIMER_COMPB_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPB_IRQ)
> +#define TIMER_COMPC_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_COMPC_IRQ)
> +#define TIMER_OVF_IRQ(n) (n * TIMER_IRQ_COUNT + TIMER0_OVF_IRQ)
> +
> +static const uint8_t irq168_328[IRQ_COUNT] = {
> + [TIMER2_COMPA_IRQ] = 8,
> + [TIMER2_COMPB_IRQ] = 9,
> + [TIMER2_OVF_IRQ] = 10,
> + [TIMER1_CAPT_IRQ] = 11,
> + [TIMER1_COMPA_IRQ] = 12,
> + [TIMER1_COMPB_IRQ] = 13,
> + [TIMER1_OVF_IRQ] = 14,
> + [TIMER0_COMPA_IRQ] = 15,
> + [TIMER0_COMPB_IRQ] = 16,
> + [TIMER0_OVF_IRQ] = 17,
> + [USART0_RXC_IRQ] = 19,
> + [USART0_DRE_IRQ] = 20,
> + [USART0_TXC_IRQ] = 21,
> +}, irq1280_2560[IRQ_COUNT] = {
> + [TIMER2_COMPA_IRQ] = 14,
> + [TIMER2_COMPB_IRQ] = 15,
> + [TIMER2_OVF_IRQ] = 16,
> + [TIMER1_CAPT_IRQ] = 17,
> + [TIMER1_COMPA_IRQ] = 18,
> + [TIMER1_COMPB_IRQ] = 19,
> + [TIMER1_COMPC_IRQ] = 20,
> + [TIMER1_OVF_IRQ] = 21,
> + [TIMER0_COMPA_IRQ] = 22,
> + [TIMER0_COMPB_IRQ] = 23,
> + [TIMER0_OVF_IRQ] = 24,
> + [USART0_RXC_IRQ] = 26,
> + [USART0_DRE_IRQ] = 27,
> + [USART0_TXC_IRQ] = 28,
> + [TIMER3_CAPT_IRQ] = 32,
> + [TIMER3_COMPA_IRQ] = 33,
> + [TIMER3_COMPB_IRQ] = 34,
> + [TIMER3_COMPC_IRQ] = 35,
> + [TIMER3_OVF_IRQ] = 36,
> + [USART1_RXC_IRQ] = 37,
> + [USART1_DRE_IRQ] = 38,
> + [USART1_TXC_IRQ] = 39,
> + [TIMER4_CAPT_IRQ] = 42,
> + [TIMER4_COMPA_IRQ] = 43,
> + [TIMER4_COMPB_IRQ] = 44,
> + [TIMER4_COMPC_IRQ] = 45,
> + [TIMER4_OVF_IRQ] = 46,
> + [TIMER5_CAPT_IRQ] = 47,
> + [TIMER5_COMPA_IRQ] = 48,
> + [TIMER5_COMPB_IRQ] = 49,
> + [TIMER5_COMPC_IRQ] = 50,
> + [TIMER5_OVF_IRQ] = 51,
> + [USART2_RXC_IRQ] = 52,
> + [USART2_DRE_IRQ] = 53,
> + [USART2_TXC_IRQ] = 54,
> + [USART3_RXC_IRQ] = 55,
> + [USART3_DRE_IRQ] = 56,
> + [USART3_TXC_IRQ] = 57,
> +};
> +
> +static void connect_peripheral_irq(const AtmegaMcuClass *mc,
> + SysBusDevice *sbd,
> + DeviceState *dev, int n,
> + unsigned peripheral_irq)
> +{
> + int irq = mc->irq[peripheral_irq];
> +
> + if (!irq) {
> + return;
> + }
> + /* FIXME move that to avr_cpu_set_int() once 'sample' board is removed */
> + assert(irq >= 2);
> + irq -= 2;
> +
> + sysbus_connect_irq(sbd, n, qdev_get_gpio_in(dev, irq));
> +}
> +
> +static void connect_power_reduction_gpio(AtmegaMcuState *s,
> + const AtmegaMcuClass *mc,
> + DeviceState *dev,
> + int peripheral_index)
> +{
> + unsigned power_index = mc->dev[peripheral_index].power_index;
> + assert(mc->dev[power_index].addr);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwr[power_index - POWER0]),
> + mc->dev[peripheral_index].power_bit,
> + qdev_get_gpio_in(dev, 0));
> +}
> +
> +static void atmega_realize(DeviceState *dev, Error **errp)
> +{
> + AtmegaMcuState *s = ATMEGA_MCU(dev);
> + const AtmegaMcuClass *mc = ATMEGA_MCU_GET_CLASS(dev);
> + DeviceState *cpudev;
> + SysBusDevice *sbd;
> + Error *err = NULL;
> + char *devname;
> + size_t i;
> +
> + assert(mc->io_size <= 0x200);
> +
> + if (!s->xtal_freq_hz) {
> + error_setg(errp, "\"xtal-frequency-hz\" property must be provided.");
> + return;
> + }
> +
> + /* CPU */
> + object_initialize_child(OBJECT(dev), "cpu", &s->cpu, sizeof(s->cpu),
> + mc->cpu_type, &err, NULL);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + object_property_set_bool(OBJECT(&s->cpu), true, "realized", &error_abort);
> + cpudev = DEVICE(&s->cpu);
> +
> + /* SRAM */
> + memory_region_init_ram(&s->sram, OBJECT(dev), "sram", mc->sram_size,
> + &error_abort);
> + memory_region_add_subregion(get_system_memory(),
> + OFFSET_DATA + mc->io_size, &s->sram);
> +
> + /* Flash */
> + memory_region_init_rom(&s->flash, OBJECT(dev),
> + "flash", mc->flash_size, &error_fatal);
> + memory_region_add_subregion(get_system_memory(), OFFSET_CODE, &s->flash);
> +
> + /*
> + * I/O
> + *
> + * 0x00 - 0x1f: Registers
> + * 0x20 - 0x5f: I/O memory
> + * 0x60 - 0xff: Extended I/O
> + */
> + s->io = qdev_create(NULL, TYPE_UNIMPLEMENTED_DEVICE);
> + qdev_prop_set_string(s->io, "name", "I/O");
> + qdev_prop_set_uint64(s->io, "size", mc->io_size);
> + qdev_init_nofail(s->io);
> + sysbus_mmio_map_overlap(SYS_BUS_DEVICE(s->io), 0, OFFSET_DATA, -1234);
> +
> + /* Power Reduction */
> + for (i = 0; i < POWER_MAX; i++) {
> + int idx = POWER(i);
> + if (!mc->dev[idx].addr) {
> + continue;
> + }
> + devname = g_strdup_printf("power%zu", i);
> + object_initialize_child(OBJECT(dev), devname,
> + &s->pwr[i], sizeof(s->pwr[i]),
> + TYPE_AVR_MASK, &error_abort, NULL);
> + object_property_set_bool(OBJECT(&s->pwr[i]), true, "realized",
> + &error_abort);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwr[i]), 0,
> + OFFSET_DATA + mc->dev[idx].addr);
> + g_free(devname);
> + }
> +
> + /* GPIO */
> + for (i = 0; i < GPIO_MAX; i++) {
> + int idx = GPIO(i);
> + if (!mc->dev[idx].addr) {
> + continue;
> + }
> + devname = g_strdup_printf("avr-gpio-%c", 'a' + (char)i);
> + create_unimplemented_device(devname,
> + OFFSET_DATA + mc->dev[idx].addr, 3);
> + g_free(devname);
> + }
> +
> + /* USART */
> + for (i = 0; i < USART_MAX; i++) {
> + int idx = USART(i);
> + if (!mc->dev[idx].addr) {
> + continue;
> + }
> + devname = g_strdup_printf("usart%zu", i);
> + object_initialize_child(OBJECT(dev), devname,
> + &s->usart[i], sizeof(s->usart[i]),
> + TYPE_AVR_USART, &error_abort, NULL);
> + qdev_prop_set_chr(DEVICE(&s->usart[i]), "chardev", serial_hd(i));
> + object_property_set_bool(OBJECT(&s->usart[i]), true, "realized",
> + &error_abort);
> + sbd = SYS_BUS_DEVICE(&s->usart[i]);
> + sysbus_mmio_map(sbd, 0, OFFSET_DATA + mc->dev[USART(i)].addr);
> + connect_peripheral_irq(mc, sbd, cpudev, 0, USART_RXC_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 1, USART_DRE_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 2, USART_TXC_IRQ(i));
> + connect_power_reduction_gpio(s, mc, DEVICE(&s->usart[i]), idx);
> + g_free(devname);
> + }
> +
> + /* Timer */
> + for (i = 0; i < TIMER_MAX; i++) {
> + int idx = TIMER(i);
> + if (!mc->dev[idx].addr) {
> + continue;
> + }
> + if (!mc->dev[idx].is_timer16) {
> + create_unimplemented_device("avr-timer8",
> + OFFSET_DATA + mc->dev[idx].addr, 5);
> + create_unimplemented_device("avr-timer8-intmask",
> + OFFSET_DATA
> + + mc->dev[idx].intmask_addr, 1);
> + create_unimplemented_device("avr-timer8-intflag",
> + OFFSET_DATA
> + + mc->dev[idx].intflag_addr, 1);
> + continue;
> + }
> + devname = g_strdup_printf("timer%zu", i);
> + object_initialize_child(OBJECT(dev), devname,
> + &s->timer[i], sizeof(s->timer[i]),
> + TYPE_AVR_TIMER16, &error_abort, NULL);
> + object_property_set_uint(OBJECT(&s->timer[i]), s->xtal_freq_hz,
> + "cpu-frequency-hz", &error_abort);
> + object_property_set_bool(OBJECT(&s->timer[i]), true, "realized",
> + &error_abort);
> + sbd = SYS_BUS_DEVICE(&s->timer[i]);
> + sysbus_mmio_map(sbd, 0, OFFSET_DATA + mc->dev[idx].addr);
> + sysbus_mmio_map(sbd, 1, OFFSET_DATA + mc->dev[idx].intmask_addr);
> + sysbus_mmio_map(sbd, 2, OFFSET_DATA + mc->dev[idx].intflag_addr);
> + connect_peripheral_irq(mc, sbd, cpudev, 0, TIMER_CAPT_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 1, TIMER_COMPA_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 2, TIMER_COMPB_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 3, TIMER_COMPC_IRQ(i));
> + connect_peripheral_irq(mc, sbd, cpudev, 4, TIMER_OVF_IRQ(i));
> + connect_power_reduction_gpio(s, mc, DEVICE(&s->timer[i]), idx);
> + g_free(devname);
> + }
> +
> + create_unimplemented_device("avr-twi", OFFSET_DATA + 0x0b8, 6);
> + create_unimplemented_device("avr-adc", OFFSET_DATA + 0x078, 8);
> + create_unimplemented_device("avr-ext-mem-ctrl", OFFSET_DATA + 0x074, 2);
> + create_unimplemented_device("avr-watchdog", OFFSET_DATA + 0x060, 1);
> + create_unimplemented_device("avr-spi", OFFSET_DATA + 0x04c, 3);
> + create_unimplemented_device("avr-eeprom", OFFSET_DATA + 0x03f, 3);
> +}
> +
> +static Property atmega_props[] = {
> + DEFINE_PROP_UINT64("xtal-frequency-hz", AtmegaMcuState,
> + xtal_freq_hz, 0),
> + DEFINE_PROP_END_OF_LIST()
> +};
> +
> +static void atmega_class_init(ObjectClass *oc, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(oc);
> +
> + dc->realize = atmega_realize;
> + device_class_set_props(dc, atmega_props);
> + /* Reason: Mapped at fixed location on the system bus */
> + dc->user_creatable = false;
> +}
> +
> +static void atmega168_class_init(ObjectClass *oc, void *data)
> +{
> + AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
> +
> + amc->cpu_type = AVR_CPU_TYPE_NAME("avr5");
> + amc->flash_size = 16 * KiB;
> + amc->eeprom_size = 512;
> + amc->sram_size = 1 * KiB;
> + amc->io_size = 256;
> + amc->gpio_count = 23;
> + amc->adc_count = 6;
> + amc->irq = irq168_328;
> + amc->dev = dev168_328;
> +};
> +
> +static void atmega328_class_init(ObjectClass *oc, void *data)
> +{
> + AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
> +
> + amc->cpu_type = AVR_CPU_TYPE_NAME("avr5");
> + amc->flash_size = 32 * KiB;
> + amc->eeprom_size = 1 * KiB;
> + amc->sram_size = 2 * KiB;
> + amc->io_size = 256;
> + amc->gpio_count = 23;
> + amc->adc_count = 6;
> + amc->irq = irq168_328;
> + amc->dev = dev168_328;
> +};
> +
> +static void atmega1280_class_init(ObjectClass *oc, void *data)
> +{
> + AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
> +
> + amc->cpu_type = AVR_CPU_TYPE_NAME("avr6");
> + amc->flash_size = 128 * KiB;
> + amc->eeprom_size = 4 * KiB;
> + amc->sram_size = 8 * KiB;
> + amc->io_size = 512;
> + amc->gpio_count = 86;
> + amc->adc_count = 16;
> + amc->irq = irq1280_2560;
> + amc->dev = dev1280_2560;
> +};
> +
> +static void atmega2560_class_init(ObjectClass *oc, void *data)
> +{
> + AtmegaMcuClass *amc = ATMEGA_MCU_CLASS(oc);
> +
> + amc->cpu_type = AVR_CPU_TYPE_NAME("avr6");
> + amc->flash_size = 256 * KiB;
> + amc->eeprom_size = 4 * KiB;
> + amc->sram_size = 8 * KiB;
> + amc->io_size = 512;
> + amc->gpio_count = 54;
> + amc->adc_count = 16;
> + amc->irq = irq1280_2560;
> + amc->dev = dev1280_2560;
> +};
> +
> +static const TypeInfo atmega_mcu_types[] = {
> + {
> + .name = TYPE_ATMEGA168_MCU,
> + .parent = TYPE_ATMEGA_MCU,
> + .class_init = atmega168_class_init,
> + }, {
> + .name = TYPE_ATMEGA328_MCU,
> + .parent = TYPE_ATMEGA_MCU,
> + .class_init = atmega328_class_init,
> + }, {
> + .name = TYPE_ATMEGA1280_MCU,
> + .parent = TYPE_ATMEGA_MCU,
> + .class_init = atmega1280_class_init,
> + }, {
> + .name = TYPE_ATMEGA2560_MCU,
> + .parent = TYPE_ATMEGA_MCU,
> + .class_init = atmega2560_class_init,
> + }, {
> + .name = TYPE_ATMEGA_MCU,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(AtmegaMcuState),
> + .class_size = sizeof(AtmegaMcuClass),
> + .class_init = atmega_class_init,
> + .abstract = true,
> + }
> +};
> +
> +DEFINE_TYPES(atmega_mcu_types)
> diff --git a/hw/avr/atmega.h b/hw/avr/atmega.h
> new file mode 100644
> index 0000000..1cfbb6b
> --- /dev/null
> +++ b/hw/avr/atmega.h
> @@ -0,0 +1,48 @@
> +/*
> + * QEMU ATmega MCU
> + *
> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> + *
> + * This work is licensed under the terms of the GNU GPLv2 or later.
> + * See the COPYING file in the top-level directory.
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef HW_AVR_ATMEGA_H
> +#define HW_AVR_ATMEGA_H
> +
> +#include "hw/char/avr_usart.h"
> +#include "hw/timer/avr_timer16.h"
> +#include "hw/misc/avr_power.h"
> +#include "target/avr/cpu.h"
> +
> +#define TYPE_ATMEGA_MCU "ATmega"
> +#define TYPE_ATMEGA168_MCU "ATmega168"
> +#define TYPE_ATMEGA328_MCU "ATmega328"
> +#define TYPE_ATMEGA1280_MCU "ATmega1280"
> +#define TYPE_ATMEGA2560_MCU "ATmega2560"
> +
> +#define ATMEGA_MCU(obj) OBJECT_CHECK(AtmegaMcuState, (obj), TYPE_ATMEGA_MCU)
> +
> +#define POWER_MAX 2
> +#define USART_MAX 4
> +#define TIMER_MAX 6
> +#define GPIO_MAX 12
> +
> +typedef struct AtmegaMcuState {
> + /*< private >*/
> + SysBusDevice parent_obj;
> + /*< public >*/
> +
> + AVRCPU cpu;
> + MemoryRegion flash;
> + MemoryRegion eeprom;
> + MemoryRegion sram;
> + DeviceState *io;
> + AVRMaskState pwr[POWER_MAX];
> + AVRUsartState usart[USART_MAX];
> + AVRTimer16State timer[TIMER_MAX];
> + uint64_t xtal_freq_hz;
> +} AtmegaMcuState;
> +
> +#endif /* HW_AVR_ATMEGA_H */
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 1:56 ` Aleksandar Markovic
@ 2020-01-31 3:09 ` Philippe Mathieu-Daudé
2020-01-31 3:45 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 3:09 UTC (permalink / raw)
To: Aleksandar Markovic, Thomas Huth, Daniel P. Berrange
Cc: Aleksandar Markovic, Richard Henderson, QEMU Developers
Hi Aleksandar,
Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
times how licensing works.
On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
<aleksandar.m.mail@gmail.com> wrote:
> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> <aleksandar.markovic@rt-rk.com> wrote:
> >
> > From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >
> > Add some AVR microcontrollers from the ATmega family:
> >
> > - middle range: ATmega168 and ATmega328
> > - high range: ATmega1280 and ATmega2560
> >
> > For product comparison:
> > https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> >
> > Datasheets:
> > http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> > http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> >
> > [AM: Remove word 'Atmel' from filenames and all elements of code]
> > Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >
> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > ---
> > hw/avr/Kconfig | 5 +
> > hw/avr/Makefile.objs | 1 +
> > hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/avr/atmega.h | 48 ++++++
> > 4 files changed, 524 insertions(+)
> > create mode 100644 hw/avr/Kconfig
> > create mode 100644 hw/avr/atmega.c
> > create mode 100644 hw/avr/atmega.h
> >
> > diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > new file mode 100644
> > index 0000000..9e6527e
> > --- /dev/null
> > +++ b/hw/avr/Kconfig
> > @@ -0,0 +1,5 @@
> > +config AVR_ATMEGA_MCU
> > + bool
> > + select AVR_TIMER16
> > + select AVR_USART
> > + select AVR_POWER
> > diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > index 123f174..af0fdde 100644
> > --- a/hw/avr/Makefile.objs
> > +++ b/hw/avr/Makefile.objs
> > @@ -1 +1,2 @@
> > obj-y += boot.o
> > +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > new file mode 100644
> > index 0000000..8cdf28b
> > --- /dev/null
> > +++ b/hw/avr/atmega.c
> > @@ -0,0 +1,470 @@
> > +/*
> > + * QEMU ATmega MCU
> > + *
> > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > + *
> > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > + * See the COPYING file in the top-level directory.
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + */
>
> Philippe,
>
> Michael and I already agreed at some moment that the whole target AVR
> should have harmonized licenses, and Sarrah agreed to change her
> license to achieve this. Do you agree to harmonize your licenses with
> the rest of the project? (This would mean changing the preable, but of
> course you remain copyright carrier as is now.)
What license do you want to use? I always use "GPLv2 or later" with
QEMU, mostly following what the others do.
Per https://wiki.qemu.org/License:
Source files with no licensing information are released under the
GNU General Public License, version 2 or (at your option) any later
version.
Reading about licensing is not fun :(
>
> Thanks,
> Aleksandar
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 3:09 ` Philippe Mathieu-Daudé
@ 2020-01-31 3:45 ` Aleksandar Markovic
2020-01-31 4:11 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 3:45 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Richard Henderson, Thomas Huth,
Daniel P. Berrange, QEMU Developers
On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> Hi Aleksandar,
>
> Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
> times how licensing works.
>
> On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com> wrote:
> > On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> > <aleksandar.markovic@rt-rk.com> wrote:
> > >
> > > From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > >
> > > Add some AVR microcontrollers from the ATmega family:
> > >
> > > - middle range: ATmega168 and ATmega328
> > > - high range: ATmega1280 and ATmega2560
> > >
> > > For product comparison:
> > > https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > > https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> > >
> > > Datasheets:
> > > http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> > > http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> > >
> > > [AM: Remove word 'Atmel' from filenames and all elements of code]
> > > Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > >
> > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > > Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > > ---
> > > hw/avr/Kconfig | 5 +
> > > hw/avr/Makefile.objs | 1 +
> > > hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > hw/avr/atmega.h | 48 ++++++
> > > 4 files changed, 524 insertions(+)
> > > create mode 100644 hw/avr/Kconfig
> > > create mode 100644 hw/avr/atmega.c
> > > create mode 100644 hw/avr/atmega.h
> > >
> > > diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > > new file mode 100644
> > > index 0000000..9e6527e
> > > --- /dev/null
> > > +++ b/hw/avr/Kconfig
> > > @@ -0,0 +1,5 @@
> > > +config AVR_ATMEGA_MCU
> > > + bool
> > > + select AVR_TIMER16
> > > + select AVR_USART
> > > + select AVR_POWER
> > > diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > > index 123f174..af0fdde 100644
> > > --- a/hw/avr/Makefile.objs
> > > +++ b/hw/avr/Makefile.objs
> > > @@ -1 +1,2 @@
> > > obj-y += boot.o
> > > +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > > diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > > new file mode 100644
> > > index 0000000..8cdf28b
> > > --- /dev/null
> > > +++ b/hw/avr/atmega.c
> > > @@ -0,0 +1,470 @@
> > > +/*
> > > + * QEMU ATmega MCU
> > > + *
> > > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > > + *
> > > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > > + * See the COPYING file in the top-level directory.
> > > + * SPDX-License-Identifier: GPL-2.0-or-later
> > > + */
> >
> > Philippe,
> >
> > Michael and I already agreed at some moment that the whole target AVR
> > should have harmonized licenses, and Sarrah agreed to change her
> > license to achieve this. Do you agree to harmonize your licenses with
> > the rest of the project? (This would mean changing the preable, but of
> > course you remain copyright carrier as is now.)
>
> What license do you want to use? I always use "GPLv2 or later" with
> QEMU, mostly following what the others do.
>
> Per https://wiki.qemu.org/License:
>
> Source files with no licensing information are released under the
> GNU General Public License, version 2 or (at your option) any later
> version.
>
> Reading about licensing is not fun :(
>
Philippe, here is the deal: All new files for AVR platform has the
following preamble, that Michael chose from the outset:
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
Now, it is preferable that licenses are harmonized within a module,
and I ask you to change the preamble to be the same as the rest of the
module, that is all. This practically means LGPL2.1+later instead
LGPL2.0+later. I think it is reasonable that we want to simplify out
license stuff, not complicate it with different licenses within a
module. There are examples of complications in cases of different
license within the same module, so it would be ideal if we avoid such
situations.
Aleksandar
> >
> > Thanks,
> > Aleksandar
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 3:45 ` Aleksandar Markovic
@ 2020-01-31 4:11 ` Aleksandar Markovic
2020-01-31 9:35 ` Thomas Huth
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 4:11 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Richard Henderson, Thomas Huth,
Daniel P. Berrange, QEMU Developers
On Fri, Jan 31, 2020 at 4:45 AM Aleksandar Markovic
<aleksandar.m.mail@gmail.com> wrote:
>
> On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> >
> > Hi Aleksandar,
> >
> > Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
> > times how licensing works.
> >
> > On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
> > <aleksandar.m.mail@gmail.com> wrote:
> > > On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> > > <aleksandar.markovic@rt-rk.com> wrote:
> > > >
> > > > From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > >
> > > > Add some AVR microcontrollers from the ATmega family:
> > > >
> > > > - middle range: ATmega168 and ATmega328
> > > > - high range: ATmega1280 and ATmega2560
> > > >
> > > > For product comparison:
> > > > https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > > > https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> > > >
> > > > Datasheets:
> > > > http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> > > > http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> > > >
> > > > [AM: Remove word 'Atmel' from filenames and all elements of code]
> > > > Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > > >
> > > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > > Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > > > Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > > > ---
> > > > hw/avr/Kconfig | 5 +
> > > > hw/avr/Makefile.objs | 1 +
> > > > hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > hw/avr/atmega.h | 48 ++++++
> > > > 4 files changed, 524 insertions(+)
> > > > create mode 100644 hw/avr/Kconfig
> > > > create mode 100644 hw/avr/atmega.c
> > > > create mode 100644 hw/avr/atmega.h
> > > >
> > > > diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > > > new file mode 100644
> > > > index 0000000..9e6527e
> > > > --- /dev/null
> > > > +++ b/hw/avr/Kconfig
> > > > @@ -0,0 +1,5 @@
> > > > +config AVR_ATMEGA_MCU
> > > > + bool
> > > > + select AVR_TIMER16
> > > > + select AVR_USART
> > > > + select AVR_POWER
> > > > diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > > > index 123f174..af0fdde 100644
> > > > --- a/hw/avr/Makefile.objs
> > > > +++ b/hw/avr/Makefile.objs
> > > > @@ -1 +1,2 @@
> > > > obj-y += boot.o
> > > > +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > > > diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > > > new file mode 100644
> > > > index 0000000..8cdf28b
> > > > --- /dev/null
> > > > +++ b/hw/avr/atmega.c
> > > > @@ -0,0 +1,470 @@
> > > > +/*
> > > > + * QEMU ATmega MCU
> > > > + *
> > > > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > > > + *
> > > > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > > > + * See the COPYING file in the top-level directory.
> > > > + * SPDX-License-Identifier: GPL-2.0-or-later
> > > > + */
> > >
> > > Philippe,
> > >
> > > Michael and I already agreed at some moment that the whole target AVR
> > > should have harmonized licenses, and Sarrah agreed to change her
> > > license to achieve this. Do you agree to harmonize your licenses with
> > > the rest of the project? (This would mean changing the preable, but of
> > > course you remain copyright carrier as is now.)
> >
> > What license do you want to use? I always use "GPLv2 or later" with
> > QEMU, mostly following what the others do.
> >
> > Per https://wiki.qemu.org/License:
> >
> > Source files with no licensing information are released under the
> > GNU General Public License, version 2 or (at your option) any later
> > version.
> >
> > Reading about licensing is not fun :(
> >
>
> Philippe, here is the deal: All new files for AVR platform has the
> following preamble, that Michael chose from the outset:
>
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see
> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
>
> Now, it is preferable that licenses are harmonized within a module,
> and I ask you to change the preamble to be the same as the rest of the
> module, that is all. This practically means LGPL2.1+later instead
> LGPL2.0+later. I think it is reasonable that we want to simplify out
> license stuff, not complicate it with different licenses within a
> module. There are examples of complications in cases of different
> license within the same module, so it would be ideal if we avoid such
> situations.
>
I didn't mean to scare you, I am just a developer like you, and I want
to avoid thinking about licenses, and think of our real work, so, I
gather, in my layman terms, it is better to have the same license for
the new platform in its entirety, if possible, that is all. :)
> Aleksandar
>
> > >
> > > Thanks,
> > > Aleksandar
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 4:11 ` Aleksandar Markovic
@ 2020-01-31 9:35 ` Thomas Huth
2020-01-31 9:40 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Thomas Huth @ 2020-01-31 9:35 UTC (permalink / raw)
To: Aleksandar Markovic, Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Richard Henderson, Daniel P. Berrange,
QEMU Developers
On 31/01/2020 05.11, Aleksandar Markovic wrote:
> On Fri, Jan 31, 2020 at 4:45 AM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com> wrote:
>>
>> On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>>>
>>> Hi Aleksandar,
>>>
>>> Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
>>> times how licensing works.
>>>
>>> On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
>>> <aleksandar.m.mail@gmail.com> wrote:
>>>> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
>>>> <aleksandar.markovic@rt-rk.com> wrote:
>>>>>
>>>>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>>>>
>>>>> Add some AVR microcontrollers from the ATmega family:
>>>>>
>>>>> - middle range: ATmega168 and ATmega328
>>>>> - high range: ATmega1280 and ATmega2560
>>>>>
>>>>> For product comparison:
>>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
>>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
>>>>>
>>>>> Datasheets:
>>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
>>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
>>>>>
>>>>> [AM: Remove word 'Atmel' from filenames and all elements of code]
>>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>>>
>>>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>>>>> ---
>>>>> hw/avr/Kconfig | 5 +
>>>>> hw/avr/Makefile.objs | 1 +
>>>>> hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> hw/avr/atmega.h | 48 ++++++
>>>>> 4 files changed, 524 insertions(+)
>>>>> create mode 100644 hw/avr/Kconfig
>>>>> create mode 100644 hw/avr/atmega.c
>>>>> create mode 100644 hw/avr/atmega.h
>>>>>
>>>>> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
>>>>> new file mode 100644
>>>>> index 0000000..9e6527e
>>>>> --- /dev/null
>>>>> +++ b/hw/avr/Kconfig
>>>>> @@ -0,0 +1,5 @@
>>>>> +config AVR_ATMEGA_MCU
>>>>> + bool
>>>>> + select AVR_TIMER16
>>>>> + select AVR_USART
>>>>> + select AVR_POWER
>>>>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
>>>>> index 123f174..af0fdde 100644
>>>>> --- a/hw/avr/Makefile.objs
>>>>> +++ b/hw/avr/Makefile.objs
>>>>> @@ -1 +1,2 @@
>>>>> obj-y += boot.o
>>>>> +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
>>>>> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
>>>>> new file mode 100644
>>>>> index 0000000..8cdf28b
>>>>> --- /dev/null
>>>>> +++ b/hw/avr/atmega.c
>>>>> @@ -0,0 +1,470 @@
>>>>> +/*
>>>>> + * QEMU ATmega MCU
>>>>> + *
>>>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
>>>>> + *
>>>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
>>>>> + * See the COPYING file in the top-level directory.
>>>>> + * SPDX-License-Identifier: GPL-2.0-or-later
>>>>> + */
>>>>
>>>> Philippe,
>>>>
>>>> Michael and I already agreed at some moment that the whole target AVR
>>>> should have harmonized licenses, and Sarrah agreed to change her
>>>> license to achieve this. Do you agree to harmonize your licenses with
>>>> the rest of the project? (This would mean changing the preable, but of
>>>> course you remain copyright carrier as is now.)
>>>
>>> What license do you want to use? I always use "GPLv2 or later" with
>>> QEMU, mostly following what the others do.
>>>
>>> Per https://wiki.qemu.org/License:
>>>
>>> Source files with no licensing information are released under the
>>> GNU General Public License, version 2 or (at your option) any later
>>> version.
>>>
>>> Reading about licensing is not fun :(
>>>
>>
>> Philippe, here is the deal: All new files for AVR platform has the
>> following preamble, that Michael chose from the outset:
>>
>> + * This library is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU Lesser General Public
>> + * License as published by the Free Software Foundation; either
>> + * version 2.1 of the License, or (at your option) any later version.
>> + *
>> + * This library is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * Lesser General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU Lesser General Public
>> + * License along with this library; if not, see
>> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
>>
>> Now, it is preferable that licenses are harmonized within a module,
>> and I ask you to change the preamble to be the same as the rest of the
>> module, that is all. This practically means LGPL2.1+later instead
>> LGPL2.0+later. I think it is reasonable that we want to simplify out
>> license stuff, not complicate it with different licenses within a
>> module. There are examples of complications in cases of different
>> license within the same module, so it would be ideal if we avoid such
>> situations.
>>
>
> I didn't mean to scare you, I am just a developer like you, and I want
> to avoid thinking about licenses, and think of our real work, so, I
> gather, in my layman terms, it is better to have the same license for
> the new platform in its entirety, if possible, that is all. :)
This is all part of QEMU, and QEMU is licensed under the GPLv2. If
someone wants to use a less strict license for their own code that is
still compatible with the GPLv2, like the LGPLv2.1, that's fine. But I
think if Philippe does not like to release his code under the LGPL, and
wants to use GPL instead, you can not force him to use LGPL here. It's
the decision of Philippe what he wants to use for his code.
Thomas
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 9:35 ` Thomas Huth
@ 2020-01-31 9:40 ` Aleksandar Markovic
2020-01-31 10:45 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 9:40 UTC (permalink / raw)
To: Thomas Huth
Cc: Aleksandar Markovic, Richard Henderson, Daniel P. Berrange,
Philippe Mathieu-Daudé,
QEMU Developers
On Fri, Jan 31, 2020 at 10:35 AM Thomas Huth <thuth@redhat.com> wrote:
>
> On 31/01/2020 05.11, Aleksandar Markovic wrote:
> > On Fri, Jan 31, 2020 at 4:45 AM Aleksandar Markovic
> > <aleksandar.m.mail@gmail.com> wrote:
> >>
> >> On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> >>>
> >>> Hi Aleksandar,
> >>>
> >>> Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
> >>> times how licensing works.
> >>>
> >>> On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
> >>> <aleksandar.m.mail@gmail.com> wrote:
> >>>> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> >>>> <aleksandar.markovic@rt-rk.com> wrote:
> >>>>>
> >>>>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >>>>>
> >>>>> Add some AVR microcontrollers from the ATmega family:
> >>>>>
> >>>>> - middle range: ATmega168 and ATmega328
> >>>>> - high range: ATmega1280 and ATmega2560
> >>>>>
> >>>>> For product comparison:
> >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> >>>>>
> >>>>> Datasheets:
> >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> >>>>>
> >>>>> [AM: Remove word 'Atmel' from filenames and all elements of code]
> >>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>>>>
> >>>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> >>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> >>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> >>>>> ---
> >>>>> hw/avr/Kconfig | 5 +
> >>>>> hw/avr/Makefile.objs | 1 +
> >>>>> hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>> hw/avr/atmega.h | 48 ++++++
> >>>>> 4 files changed, 524 insertions(+)
> >>>>> create mode 100644 hw/avr/Kconfig
> >>>>> create mode 100644 hw/avr/atmega.c
> >>>>> create mode 100644 hw/avr/atmega.h
> >>>>>
> >>>>> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> >>>>> new file mode 100644
> >>>>> index 0000000..9e6527e
> >>>>> --- /dev/null
> >>>>> +++ b/hw/avr/Kconfig
> >>>>> @@ -0,0 +1,5 @@
> >>>>> +config AVR_ATMEGA_MCU
> >>>>> + bool
> >>>>> + select AVR_TIMER16
> >>>>> + select AVR_USART
> >>>>> + select AVR_POWER
> >>>>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> >>>>> index 123f174..af0fdde 100644
> >>>>> --- a/hw/avr/Makefile.objs
> >>>>> +++ b/hw/avr/Makefile.objs
> >>>>> @@ -1 +1,2 @@
> >>>>> obj-y += boot.o
> >>>>> +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> >>>>> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> >>>>> new file mode 100644
> >>>>> index 0000000..8cdf28b
> >>>>> --- /dev/null
> >>>>> +++ b/hw/avr/atmega.c
> >>>>> @@ -0,0 +1,470 @@
> >>>>> +/*
> >>>>> + * QEMU ATmega MCU
> >>>>> + *
> >>>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> >>>>> + *
> >>>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
> >>>>> + * See the COPYING file in the top-level directory.
> >>>>> + * SPDX-License-Identifier: GPL-2.0-or-later
> >>>>> + */
> >>>>
> >>>> Philippe,
> >>>>
> >>>> Michael and I already agreed at some moment that the whole target AVR
> >>>> should have harmonized licenses, and Sarrah agreed to change her
> >>>> license to achieve this. Do you agree to harmonize your licenses with
> >>>> the rest of the project? (This would mean changing the preable, but of
> >>>> course you remain copyright carrier as is now.)
> >>>
> >>> What license do you want to use? I always use "GPLv2 or later" with
> >>> QEMU, mostly following what the others do.
> >>>
> >>> Per https://wiki.qemu.org/License:
> >>>
> >>> Source files with no licensing information are released under the
> >>> GNU General Public License, version 2 or (at your option) any later
> >>> version.
> >>>
> >>> Reading about licensing is not fun :(
> >>>
> >>
> >> Philippe, here is the deal: All new files for AVR platform has the
> >> following preamble, that Michael chose from the outset:
> >>
> >> + * This library is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU Lesser General Public
> >> + * License as published by the Free Software Foundation; either
> >> + * version 2.1 of the License, or (at your option) any later version.
> >> + *
> >> + * This library is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> >> + * Lesser General Public License for more details.
> >> + *
> >> + * You should have received a copy of the GNU Lesser General Public
> >> + * License along with this library; if not, see
> >> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> >>
> >> Now, it is preferable that licenses are harmonized within a module,
> >> and I ask you to change the preamble to be the same as the rest of the
> >> module, that is all. This practically means LGPL2.1+later instead
> >> LGPL2.0+later. I think it is reasonable that we want to simplify out
> >> license stuff, not complicate it with different licenses within a
> >> module. There are examples of complications in cases of different
> >> license within the same module, so it would be ideal if we avoid such
> >> situations.
> >>
> >
> > I didn't mean to scare you, I am just a developer like you, and I want
> > to avoid thinking about licenses, and think of our real work, so, I
> > gather, in my layman terms, it is better to have the same license for
> > the new platform in its entirety, if possible, that is all. :)
>
> This is all part of QEMU, and QEMU is licensed under the GPLv2. If
> someone wants to use a less strict license for their own code that is
> still compatible with the GPLv2, like the LGPLv2.1, that's fine. But I
> think if Philippe does not like to release his code under the LGPL, and
> wants to use GPL instead, you can not force him to use LGPL here. It's
> the decision of Philippe what he wants to use for his code.
>
It is his decision, but it can be reasonable or not so reasonable. I
think it is logical that he follows the license model of the module he
contributes to, isn't it?
Aleksandar
> Thomas
>
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 9:40 ` Aleksandar Markovic
@ 2020-01-31 10:45 ` Philippe Mathieu-Daudé
2020-01-31 11:07 ` Aleksandar Markovic
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 10:45 UTC (permalink / raw)
To: Aleksandar Markovic
Cc: Aleksandar Markovic, Richard Henderson, Thomas Huth,
Daniel P. Berrange, QEMU Developers
On Fri, Jan 31, 2020 at 10:40 AM Aleksandar Markovic
<aleksandar.m.mail@gmail.com> wrote:
> On Fri, Jan 31, 2020 at 10:35 AM Thomas Huth <thuth@redhat.com> wrote:
> > On 31/01/2020 05.11, Aleksandar Markovic wrote:
> > > On Fri, Jan 31, 2020 at 4:45 AM Aleksandar Markovic
> > > <aleksandar.m.mail@gmail.com> wrote:
> > >>
> > >> On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> > >>>
> > >>> Hi Aleksandar,
> > >>>
> > >>> Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
> > >>> times how licensing works.
> > >>>
> > >>> On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
> > >>> <aleksandar.m.mail@gmail.com> wrote:
> > >>>> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> > >>>> <aleksandar.markovic@rt-rk.com> wrote:
> > >>>>>
> > >>>>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > >>>>>
> > >>>>> Add some AVR microcontrollers from the ATmega family:
> > >>>>>
> > >>>>> - middle range: ATmega168 and ATmega328
> > >>>>> - high range: ATmega1280 and ATmega2560
> > >>>>>
> > >>>>> For product comparison:
> > >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> > >>>>>
> > >>>>> Datasheets:
> > >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> > >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> > >>>>>
> > >>>>> [AM: Remove word 'Atmel' from filenames and all elements of code]
> > >>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > >>>>>
> > >>>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > >>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > >>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > >>>>> ---
> > >>>>> hw/avr/Kconfig | 5 +
> > >>>>> hw/avr/Makefile.objs | 1 +
> > >>>>> hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > >>>>> hw/avr/atmega.h | 48 ++++++
> > >>>>> 4 files changed, 524 insertions(+)
> > >>>>> create mode 100644 hw/avr/Kconfig
> > >>>>> create mode 100644 hw/avr/atmega.c
> > >>>>> create mode 100644 hw/avr/atmega.h
> > >>>>>
> > >>>>> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > >>>>> new file mode 100644
> > >>>>> index 0000000..9e6527e
> > >>>>> --- /dev/null
> > >>>>> +++ b/hw/avr/Kconfig
> > >>>>> @@ -0,0 +1,5 @@
> > >>>>> +config AVR_ATMEGA_MCU
> > >>>>> + bool
> > >>>>> + select AVR_TIMER16
> > >>>>> + select AVR_USART
> > >>>>> + select AVR_POWER
> > >>>>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > >>>>> index 123f174..af0fdde 100644
> > >>>>> --- a/hw/avr/Makefile.objs
> > >>>>> +++ b/hw/avr/Makefile.objs
> > >>>>> @@ -1 +1,2 @@
> > >>>>> obj-y += boot.o
> > >>>>> +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > >>>>> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > >>>>> new file mode 100644
> > >>>>> index 0000000..8cdf28b
> > >>>>> --- /dev/null
> > >>>>> +++ b/hw/avr/atmega.c
> > >>>>> @@ -0,0 +1,470 @@
> > >>>>> +/*
> > >>>>> + * QEMU ATmega MCU
> > >>>>> + *
> > >>>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > >>>>> + *
> > >>>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
> > >>>>> + * See the COPYING file in the top-level directory.
> > >>>>> + * SPDX-License-Identifier: GPL-2.0-or-later
> > >>>>> + */
> > >>>>
> > >>>> Philippe,
> > >>>>
> > >>>> Michael and I already agreed at some moment that the whole target AVR
> > >>>> should have harmonized licenses, and Sarrah agreed to change her
> > >>>> license to achieve this. Do you agree to harmonize your licenses with
> > >>>> the rest of the project? (This would mean changing the preable, but of
> > >>>> course you remain copyright carrier as is now.)
Note I'm not worried about my authorship but than other contributors
being able to reuse and modify this code.
> > >>>
> > >>> What license do you want to use? I always use "GPLv2 or later" with
> > >>> QEMU, mostly following what the others do.
> > >>>
> > >>> Per https://wiki.qemu.org/License:
> > >>>
> > >>> Source files with no licensing information are released under the
> > >>> GNU General Public License, version 2 or (at your option) any later
> > >>> version.
> > >>>
> > >>> Reading about licensing is not fun :(
> > >>>
> > >>
> > >> Philippe, here is the deal: All new files for AVR platform has the
> > >> following preamble, that Michael chose from the outset:
> > >>
> > >> + * This library is free software; you can redistribute it and/or
> > >> + * modify it under the terms of the GNU Lesser General Public
> > >> + * License as published by the Free Software Foundation; either
> > >> + * version 2.1 of the License, or (at your option) any later version.
> > >> + *
> > >> + * This library is distributed in the hope that it will be useful,
> > >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > >> + * Lesser General Public License for more details.
> > >> + *
> > >> + * You should have received a copy of the GNU Lesser General Public
> > >> + * License along with this library; if not, see
> > >> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> > >>
> > >> Now, it is preferable that licenses are harmonized within a module,
> > >> and I ask you to change the preamble to be the same as the rest of the
> > >> module, that is all. This practically means LGPL2.1+later instead
> > >> LGPL2.0+later. I think it is reasonable that we want to simplify out
> > >> license stuff, not complicate it with different licenses within a
> > >> module. There are examples of complications in cases of different
> > >> license within the same module, so it would be ideal if we avoid such
> > >> situations.
I don't use QEMU as a library, it is my main application.
I tried to make this file clean/easy to read so it can be reused by
other archs when implementing boards able to use multiple SoCs, this
is not AVR-only.
I see LGPLv2.1 is deprecated for version 3, why use 2.1?
https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
```
You can use it too, but we suggest you first think carefully about
whether this license or the ordinary General Public License is the
better strategy to use in any particular case, based on the
explanations below.
...
Most GNU software, including some libraries, is covered by the
ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and
is quite different from the ordinary General Public License. We use
this license for certain libraries in order to permit linking those
libraries into non-free programs.
```
Personally I don't care about non-free programs using QEMU as a
library, and I don't think a such program would use the default QEMU
config anyway.
You can build the AVR (tcg) cpus without GPLv2+ hardware with this patch:
---
--- a/default-configs/avr-softmmu.mak
+++ b/default-configs/avr-softmmu.mak
@@ -2,4 +2,4 @@
# Boards:
#
-CONFIG_ARDUINO=y
+CONFIG_ARDUINO=n
---
But I doubt you can build QEMU without GPLv2+ components.
See also:
https://www.gnu.org/licenses/why-not-lgpl.html
```
Which license is best for a given library is a matter of strategy ...
Using the ordinary GPL for a library gives free software developers an
advantage over proprietary developers: a library that they can use,
while proprietary developers cannot use it ... When a free library's
features are readily available for proprietary software through other
alternative libraries ... the library cannot give free software any
particular advantage, so it is better to use the Lesser GPL for that
library.
```
> > > I didn't mean to scare you, I am just a developer like you, and I want
> > > to avoid thinking about licenses, and think of our real work, so, I
> > > gather, in my layman terms, it is better to have the same license for
> > > the new platform in its entirety, if possible, that is all. :)
> >
> > This is all part of QEMU, and QEMU is licensed under the GPLv2. If
> > someone wants to use a less strict license for their own code that is
> > still compatible with the GPLv2, like the LGPLv2.1, that's fine. But I
> > think if Philippe does not like to release his code under the LGPL, and
> > wants to use GPL instead, you can not force him to use LGPL here. It's
> > the decision of Philippe what he wants to use for his code.
> >
>
> It is his decision, but it can be reasonable or not so reasonable. I
> think it is logical that he follows the license model of the module he
> contributes to, isn't it?
>
> Aleksandar
>
> > Thomas
> >
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
2020-01-31 10:45 ` Philippe Mathieu-Daudé
@ 2020-01-31 11:07 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 11:07 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Richard Henderson, Thomas Huth,
Daniel P. Berrange, QEMU Developers
On Fri, Jan 31, 2020 at 11:45 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On Fri, Jan 31, 2020 at 10:40 AM Aleksandar Markovic
> <aleksandar.m.mail@gmail.com> wrote:
> > On Fri, Jan 31, 2020 at 10:35 AM Thomas Huth <thuth@redhat.com> wrote:
> > > On 31/01/2020 05.11, Aleksandar Markovic wrote:
> > > > On Fri, Jan 31, 2020 at 4:45 AM Aleksandar Markovic
> > > > <aleksandar.m.mail@gmail.com> wrote:
> > > >>
> > > >> On Fri, Jan 31, 2020 at 4:09 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> > > >>>
> > > >>> Hi Aleksandar,
> > > >>>
> > > >>> Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
> > > >>> times how licensing works.
> > > >>>
> > > >>> On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
> > > >>> <aleksandar.m.mail@gmail.com> wrote:
> > > >>>> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> > > >>>> <aleksandar.markovic@rt-rk.com> wrote:
> > > >>>>>
> > > >>>>> From: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > >>>>>
> > > >>>>> Add some AVR microcontrollers from the ATmega family:
> > > >>>>>
> > > >>>>> - middle range: ATmega168 and ATmega328
> > > >>>>> - high range: ATmega1280 and ATmega2560
> > > >>>>>
> > > >>>>> For product comparison:
> > > >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > > >>>>> https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> > > >>>>>
> > > >>>>> Datasheets:
> > > >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> > > >>>>> http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> > > >>>>>
> > > >>>>> [AM: Remove word 'Atmel' from filenames and all elements of code]
> > > >>>>> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > > >>>>>
> > > >>>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > >>>>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> > > >>>>> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> > > >>>>> ---
> > > >>>>> hw/avr/Kconfig | 5 +
> > > >>>>> hw/avr/Makefile.objs | 1 +
> > > >>>>> hw/avr/atmega.c | 470 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > >>>>> hw/avr/atmega.h | 48 ++++++
> > > >>>>> 4 files changed, 524 insertions(+)
> > > >>>>> create mode 100644 hw/avr/Kconfig
> > > >>>>> create mode 100644 hw/avr/atmega.c
> > > >>>>> create mode 100644 hw/avr/atmega.h
> > > >>>>>
> > > >>>>> diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > > >>>>> new file mode 100644
> > > >>>>> index 0000000..9e6527e
> > > >>>>> --- /dev/null
> > > >>>>> +++ b/hw/avr/Kconfig
> > > >>>>> @@ -0,0 +1,5 @@
> > > >>>>> +config AVR_ATMEGA_MCU
> > > >>>>> + bool
> > > >>>>> + select AVR_TIMER16
> > > >>>>> + select AVR_USART
> > > >>>>> + select AVR_POWER
> > > >>>>> diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > > >>>>> index 123f174..af0fdde 100644
> > > >>>>> --- a/hw/avr/Makefile.objs
> > > >>>>> +++ b/hw/avr/Makefile.objs
> > > >>>>> @@ -1 +1,2 @@
> > > >>>>> obj-y += boot.o
> > > >>>>> +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > > >>>>> diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > > >>>>> new file mode 100644
> > > >>>>> index 0000000..8cdf28b
> > > >>>>> --- /dev/null
> > > >>>>> +++ b/hw/avr/atmega.c
> > > >>>>> @@ -0,0 +1,470 @@
> > > >>>>> +/*
> > > >>>>> + * QEMU ATmega MCU
> > > >>>>> + *
> > > >>>>> + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > > >>>>> + *
> > > >>>>> + * This work is licensed under the terms of the GNU GPLv2 or later.
> > > >>>>> + * See the COPYING file in the top-level directory.
> > > >>>>> + * SPDX-License-Identifier: GPL-2.0-or-later
> > > >>>>> + */
> > > >>>>
> > > >>>> Philippe,
> > > >>>>
> > > >>>> Michael and I already agreed at some moment that the whole target AVR
> > > >>>> should have harmonized licenses, and Sarrah agreed to change her
> > > >>>> license to achieve this. Do you agree to harmonize your licenses with
> > > >>>> the rest of the project? (This would mean changing the preable, but of
> > > >>>> course you remain copyright carrier as is now.)
>
> Note I'm not worried about my authorship but than other contributors
> being able to reuse and modify this code.
>
> > > >>>
> > > >>> What license do you want to use? I always use "GPLv2 or later" with
> > > >>> QEMU, mostly following what the others do.
> > > >>>
> > > >>> Per https://wiki.qemu.org/License:
> > > >>>
> > > >>> Source files with no licensing information are released under the
> > > >>> GNU General Public License, version 2 or (at your option) any later
> > > >>> version.
> > > >>>
> > > >>> Reading about licensing is not fun :(
> > > >>>
> > > >>
> > > >> Philippe, here is the deal: All new files for AVR platform has the
> > > >> following preamble, that Michael chose from the outset:
> > > >>
> > > >> + * This library is free software; you can redistribute it and/or
> > > >> + * modify it under the terms of the GNU Lesser General Public
> > > >> + * License as published by the Free Software Foundation; either
> > > >> + * version 2.1 of the License, or (at your option) any later version.
> > > >> + *
> > > >> + * This library is distributed in the hope that it will be useful,
> > > >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > > >> + * Lesser General Public License for more details.
> > > >> + *
> > > >> + * You should have received a copy of the GNU Lesser General Public
> > > >> + * License along with this library; if not, see
> > > >> + * <http://www.gnu.org/licenses/lgpl-2.1.html>
> > > >>
> > > >> Now, it is preferable that licenses are harmonized within a module,
> > > >> and I ask you to change the preamble to be the same as the rest of the
> > > >> module, that is all. This practically means LGPL2.1+later instead
> > > >> LGPL2.0+later. I think it is reasonable that we want to simplify out
> > > >> license stuff, not complicate it with different licenses within a
> > > >> module. There are examples of complications in cases of different
> > > >> license within the same module, so it would be ideal if we avoid such
> > > >> situations.
>
> I don't use QEMU as a library, it is my main application.
> I tried to make this file clean/easy to read so it can be reused by
> other archs when implementing boards able to use multiple SoCs, this
> is not AVR-only.
>
> I see LGPLv2.1 is deprecated for version 3, why use 2.1?
>
> https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
>
> ```
> You can use it too, but we suggest you first think carefully about
> whether this license or the ordinary General Public License is the
> better strategy to use in any particular case, based on the
> explanations below.
> ...
> Most GNU software, including some libraries, is covered by the
> ordinary GNU General Public License. This license, the GNU Lesser
> General Public License, applies to certain designated libraries, and
> is quite different from the ordinary General Public License. We use
> this license for certain libraries in order to permit linking those
> libraries into non-free programs.
> ```
>
> Personally I don't care about non-free programs using QEMU as a
> library, and I don't think a such program would use the default QEMU
> config anyway.
>
> You can build the AVR (tcg) cpus without GPLv2+ hardware with this patch:
>
> ---
> --- a/default-configs/avr-softmmu.mak
> +++ b/default-configs/avr-softmmu.mak
> @@ -2,4 +2,4 @@
>
> # Boards:
> #
> -CONFIG_ARDUINO=y
> +CONFIG_ARDUINO=n
> ---
>
> But I doubt you can build QEMU without GPLv2+ components.
>
> See also:
> https://www.gnu.org/licenses/why-not-lgpl.html
>
> ```
> Which license is best for a given library is a matter of strategy ...
> Using the ordinary GPL for a library gives free software developers an
> advantage over proprietary developers: a library that they can use,
> while proprietary developers cannot use it ... When a free library's
> features are readily available for proprietary software through other
> alternative libraries ... the library cannot give free software any
> particular advantage, so it is better to use the Lesser GPL for that
> library.
> ```
>
Philippe,
You are just overly complicating the license stuff.
The original and main AVR contributor chose LGPL2.1+later, which is
compatible with QEMU. For that reason alone, I think anyone
contributing to this target in a substantial way should respect that
and continue using that license. I am just politely asking you, for
the sake of simplicity and common sense, to harmonize your
contributions. That is all.
Thanks,
Aleksandar
> > > > I didn't mean to scare you, I am just a developer like you, and I want
> > > > to avoid thinking about licenses, and think of our real work, so, I
> > > > gather, in my layman terms, it is better to have the same license for
> > > > the new platform in its entirety, if possible, that is all. :)
> > >
> > > This is all part of QEMU, and QEMU is licensed under the GPLv2. If
> > > someone wants to use a less strict license for their own code that is
> > > still compatible with the GPLv2, like the LGPLv2.1, that's fine. But I
> > > think if Philippe does not like to release his code under the LGPL, and
> > > wants to use GPL instead, you can not force him to use LGPL here. It's
> > > the decision of Philippe what he wants to use for his code.
> > >
> >
> > It is his decision, but it can be reasonable or not so reasonable. I
> > think it is logical that he follows the license model of the module he
> > contributes to, isn't it?
> >
> > Aleksandar
> >
> > > Thomas
> > >
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 25/29] hw/avr: Add some Arduino boards
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (23 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 26/29] target/avr: Update build system Aleksandar Markovic
` (5 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Philippe Mathieu-Daudé, Aleksandar Markovic
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Arduino boards are build with AVR chipsets.
Add some of the popular boards:
- Arduino Duemilanove
- Arduino Uno
- Arduino Mega
For more information:
https://www.arduino.cc/en/Main/Products
https://store.arduino.cc/arduino-genuino/most-popular
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
MAINTAINERS | 7 +++
hw/avr/Kconfig | 4 ++
hw/avr/Makefile.objs | 1 +
hw/avr/arduino.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 163 insertions(+)
create mode 100644 hw/avr/arduino.c
diff --git a/MAINTAINERS b/MAINTAINERS
index d0a114b..97c8ef7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -905,6 +905,13 @@ F: include/hw/timer/avr_timer16.h
F: hw/misc/avr_power.c
F: include/hw/misc/avr_power.h
F: tests/acceptance/machine_avr6.py
+F: hw/avr/atmega.*
+
+Arduino
+M: Philippe Mathieu-Daudé <f4bug@amsat.org>
+R: Sarah Harris <S.E.Harris@kent.ac.uk>
+S: Maintained
+F: hw/avr/arduino.c
CRIS Machines
-------------
diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
index 9e6527e..d31298c 100644
--- a/hw/avr/Kconfig
+++ b/hw/avr/Kconfig
@@ -3,3 +3,7 @@ config AVR_ATMEGA_MCU
select AVR_TIMER16
select AVR_USART
select AVR_POWER
+
+config ARDUINO
+ select AVR_ATMEGA_MCU
+ select UNIMP
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
index af0fdde..4dca064 100644
--- a/hw/avr/Makefile.objs
+++ b/hw/avr/Makefile.objs
@@ -1,2 +1,3 @@
obj-y += boot.o
obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
+obj-$(CONFIG_ARDUINO) += arduino.o
diff --git a/hw/avr/arduino.c b/hw/avr/arduino.c
new file mode 100644
index 0000000..00d67c9
--- /dev/null
+++ b/hw/avr/arduino.c
@@ -0,0 +1,151 @@
+/*
+ * QEMU Arduino boards
+ *
+ * Copyright (c) 2019 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+/* TODO: Implement the use of EXTRAM */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "atmega.h"
+#include "boot.h"
+
+typedef struct ArduinoMachineState {
+ /*< private >*/
+ MachineState parent_obj;
+ /*< public >*/
+ AtmegaMcuState mcu;
+} ArduinoMachineState;
+
+typedef struct ArduinoMachineClass {
+ /*< private >*/
+ MachineClass parent_class;
+ /*< public >*/
+ const char *mcu_type;
+ uint64_t xtal_hz;
+} ArduinoMachineClass;
+
+#define TYPE_ARDUINO_MACHINE \
+ MACHINE_TYPE_NAME("arduino")
+#define ARDUINO_MACHINE(obj) \
+ OBJECT_CHECK(ArduinoMachineState, (obj), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ArduinoMachineClass, (klass), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ArduinoMachineClass, (obj), TYPE_ARDUINO_MACHINE)
+
+static void arduino_machine_init(MachineState *machine)
+{
+ ArduinoMachineClass *amc = ARDUINO_MACHINE_GET_CLASS(machine);
+ ArduinoMachineState *ams = ARDUINO_MACHINE(machine);
+
+ sysbus_init_child_obj(OBJECT(machine), "mcu", &ams->mcu, sizeof(ams->mcu),
+ amc->mcu_type);
+ object_property_set_uint(OBJECT(&ams->mcu), amc->xtal_hz,
+ "xtal-frequency-hz", &error_abort);
+ object_property_set_bool(OBJECT(&ams->mcu), true, "realized",
+ &error_abort);
+
+ if (machine->firmware) {
+ if (!avr_load_firmware(&ams->mcu.cpu, machine,
+ &ams->mcu.flash, machine->firmware)) {
+ exit(1);
+ }
+ }
+}
+
+static void arduino_machine_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->init = arduino_machine_init;
+ mc->default_cpus = 1;
+ mc->min_cpus = mc->default_cpus;
+ mc->max_cpus = mc->default_cpus;
+ mc->no_floppy = 1;
+ mc->no_cdrom = 1;
+ mc->no_parallel = 1;
+}
+
+static void arduino_duemilanove_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+ /* https://www.arduino.cc/en/Main/ArduinoBoardDuemilanove */
+ mc->desc = "Arduino Duemilanove (ATmega168)",
+ mc->alias = "2009";
+ amc->mcu_type = TYPE_ATMEGA168_MCU;
+ amc->xtal_hz = 16 * 1000 * 1000;
+};
+
+static void arduino_uno_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+ /* https://store.arduino.cc/arduino-uno-rev3 */
+ mc->desc = "Arduino UNO (ATmega328P)";
+ mc->alias = "uno";
+ amc->mcu_type = TYPE_ATMEGA328_MCU;
+ amc->xtal_hz = 16 * 1000 * 1000;
+};
+
+static void arduino_mega_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+ /* https://www.arduino.cc/en/Main/ArduinoBoardMega */
+ mc->desc = "Arduino Mega (ATmega1280)";
+ mc->alias = "mega";
+ amc->mcu_type = TYPE_ATMEGA1280_MCU;
+ amc->xtal_hz = 16 * 1000 * 1000;
+};
+
+static void arduino_mega2560_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+ /* https://store.arduino.cc/arduino-mega-2560-rev3 */
+ mc->desc = "Arduino Mega 2560 (ATmega2560)";
+ mc->alias = "mega2560";
+ amc->mcu_type = TYPE_ATMEGA2560_MCU;
+ amc->xtal_hz = 16 * 1000 * 1000; /* CSTCE16M0V53-R0 */
+};
+
+static const TypeInfo arduino_machine_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("arduino-duemilanove"),
+ .parent = TYPE_ARDUINO_MACHINE,
+ .class_init = arduino_duemilanove_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("arduino-uno"),
+ .parent = TYPE_ARDUINO_MACHINE,
+ .class_init = arduino_uno_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("arduino-mega"),
+ .parent = TYPE_ARDUINO_MACHINE,
+ .class_init = arduino_mega_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("arduino-mega-2560-v3"),
+ .parent = TYPE_ARDUINO_MACHINE,
+ .class_init = arduino_mega2560_class_init,
+ }, {
+ .name = TYPE_ARDUINO_MACHINE,
+ .parent = TYPE_MACHINE,
+ .instance_size = sizeof(ArduinoMachineState),
+ .class_size = sizeof(ArduinoMachineClass),
+ .class_init = arduino_machine_class_init,
+ .abstract = true,
+ }
+};
+
+DEFINE_TYPES(arduino_machine_types)
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 26/29] target/avr: Update build system
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (24 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 25/29] hw/avr: Add some Arduino boards Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-02-04 22:58 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 27/29] tests/boot-serial-test: Test some Arduino boards (AVR based) Aleksandar Markovic
` (4 subsequent siblings)
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Michael Rolnik, Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Make AVR support buildable.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
configure | 7 +++++++
default-configs/avr-softmmu.mak | 5 +++++
target/avr/Makefile.objs | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 46 insertions(+)
create mode 100644 default-configs/avr-softmmu.mak
create mode 100644 target/avr/Makefile.objs
diff --git a/configure b/configure
index a72a5de..51f0b9e 100755
--- a/configure
+++ b/configure
@@ -7640,6 +7640,10 @@ case "$target_name" in
mttcg="yes"
gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
;;
+ avr)
+ gdb_xml_files="avr-cpu.xml"
+ target_compiler=$cross_cc_avr
+ ;;
cris)
;;
hppa)
@@ -7859,6 +7863,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
disas_config "ARM_A64"
fi
;;
+ avr)
+ disas_config "AVR"
+ ;;
cris)
disas_config "CRIS"
;;
diff --git a/default-configs/avr-softmmu.mak b/default-configs/avr-softmmu.mak
new file mode 100644
index 0000000..80218ad
--- /dev/null
+++ b/default-configs/avr-softmmu.mak
@@ -0,0 +1,5 @@
+# Default configuration for avr-softmmu
+
+# Boards:
+#
+CONFIG_ARDUINO=y
diff --git a/target/avr/Makefile.objs b/target/avr/Makefile.objs
new file mode 100644
index 0000000..7523e0c
--- /dev/null
+++ b/target/avr/Makefile.objs
@@ -0,0 +1,34 @@
+#
+# QEMU AVR CPU
+#
+# Copyright (c) 2019 Michael Rolnik
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, see
+# <http://www.gnu.org/licenses/lgpl-2.1.html>
+#
+
+DECODETREE = $(SRC_PATH)/scripts/decodetree.py
+decode-y = $(SRC_PATH)/target/avr/insn.decode
+
+target/avr/decode_insn.inc.c: $(decode-y) $(DECODETREE)
+ $(call quiet-command, \
+ $(PYTHON) $(DECODETREE) -o $@ --decode decode_insn --insnwidth 16 $<, \
+ "GEN", $(TARGET_DIR)$@)
+
+target/avr/translate.o: target/avr/decode_insn.inc.c
+
+obj-y += translate.o cpu.o helper.o
+obj-y += gdbstub.o
+obj-y += disas.o
+obj-$(CONFIG_SOFTMMU) += machine.o
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 26/29] target/avr: Update build system
2020-01-31 0:03 ` [PATCH rc4 26/29] target/avr: Update build system Aleksandar Markovic
@ 2020-02-04 22:58 ` Aleksandar Markovic
0 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-02-04 22:58 UTC (permalink / raw)
To: Aleksandar Markovic; +Cc: Richard Henderson, Michael Rolnik, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 3616 bytes --]
On Friday, January 31, 2020, Aleksandar Markovic <
aleksandar.markovic@rt-rk.com> wrote:
> From: Michael Rolnik <mrolnik@gmail.com>
>
> Make AVR support buildable.
>
> [AM: Remove word 'Atmel' from filenames and all elements of code]
> Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
> ---
> configure | 7 +++++++
> default-configs/avr-softmmu.mak | 5 +++++
> target/avr/Makefile.objs | 34 ++++++++++++++++++++++++++++++++++
> 3 files changed, 46 insertions(+)
> create mode 100644 default-configs/avr-softmmu.mak
> create mode 100644 target/avr/Makefile.objs
>
> diff --git a/configure b/configure
> index a72a5de..51f0b9e 100755
> --- a/configure
> +++ b/configure
> @@ -7640,6 +7640,10 @@ case "$target_name" in
> mttcg="yes"
> gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml
> arm-vfp.xml arm-vfp3.xml arm-neon.xml"
> ;;
> + avr)
> + gdb_xml_files="avr-cpu.xml"
> + target_compiler=$cross_cc_avr
> + ;;
> cris)
> ;;
> hppa)
> @@ -7859,6 +7863,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
> disas_config "ARM_A64"
> fi
> ;;
> + avr)
> + disas_config "AVR"
> + ;;
> cris)
> disas_config "CRIS"
> ;;
> diff --git a/default-configs/avr-softmmu.mak
> b/default-configs/avr-softmmu.mak
> new file mode 100644
> index 0000000..80218ad
> --- /dev/null
> +++ b/default-configs/avr-softmmu.mak
> @@ -0,0 +1,5 @@
> +# Default configuration for avr-softmmu
> +
> +# Boards:
> +#
> +CONFIG_ARDUINO=y
> diff --git a/target/avr/Makefile.objs b/target/avr/Makefile.objs
> new file mode 100644
> index 0000000..7523e0c
> --- /dev/null
> +++ b/target/avr/Makefile.objs
> @@ -0,0 +1,34 @@
> +#
> +# QEMU AVR CPU
> +#
> +# Copyright (c) 2019 Michael Rolnik
> +#
> +# This library is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU Lesser General Public
> +# License as published by the Free Software Foundation; either
> +# version 2.1 of the License, or (at your option) any later version.
> +#
> +# This library is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# Lesser General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +# License along with this library; if not, see
> +# <http://www.gnu.org/licenses/lgpl-2.1.html>
> +#
> +
> +DECODETREE = $(SRC_PATH)/scripts/decodetree.py
> +decode-y = $(SRC_PATH)/target/avr/insn.decode
> +
> +target/avr/decode_insn.inc.c: $(decode-y) $(DECODETREE)
> + $(call quiet-command, \
> + $(PYTHON) $(DECODETREE) -o $@ --decode decode_insn --insnwidth
> 16 $<, \
> + "GEN", $(TARGET_DIR)$@)
> +
> +target/avr/translate.o: target/avr/decode_insn.inc.c
> +
> +obj-y += translate.o cpu.o helper.o
> +obj-y += gdbstub.o
> +obj-y += disas.o
> +obj-$(CONFIG_SOFTMMU) += machine.o
The last line should not contain "-$(CONFIG_SOFTMMU)", since there is only
softmmu case for avr. I will remove it in rc5, unless somebody tell me not
to do so.
Aleksandar
> --
> 2.7.4
>
>
[-- Attachment #2: Type: text/html, Size: 4820 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH rc4 27/29] tests/boot-serial-test: Test some Arduino boards (AVR based)
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (25 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 26/29] target/avr: Update build system Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 28/29] tests/acceptance: Test the Arduino MEGA2560 board Aleksandar Markovic
` (3 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Michael Rolnik, Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
Print out 'T' through serial port
The Arduino Duemilanove is based on a AVR5 CPU, while the
Arduino MEGA2560 on a AVR6 CPU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash Arduino adjustments from f4bug]
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
tests/qtest/Makefile.include | 2 ++
tests/qtest/boot-serial-test.c | 11 +++++++++++
2 files changed, 13 insertions(+)
diff --git a/tests/qtest/Makefile.include b/tests/qtest/Makefile.include
index e6bb4ab..4817b63 100644
--- a/tests/qtest/Makefile.include
+++ b/tests/qtest/Makefile.include
@@ -65,6 +65,8 @@ check-qtest-i386-y += numa-test
check-qtest-x86_64-y += $(check-qtest-i386-y)
+check-qtest-avr-y += boot-serial-test
+
check-qtest-alpha-y += boot-serial-test
check-qtest-alpha-$(CONFIG_VGA) += display-vga-test
diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c
index 8e8c5b0..55a37a4 100644
--- a/tests/qtest/boot-serial-test.c
+++ b/tests/qtest/boot-serial-test.c
@@ -16,6 +16,15 @@
#include "qemu/osdep.h"
#include "libqtest.h"
+static const uint8_t bios_avr[] = {
+ 0x88, 0xe0, /* ldi r24, 0x08 */
+ 0x80, 0x93, 0xc1, 0x00, /* sts 0x00C1, r24 ; Enable tx */
+ 0x86, 0xe0, /* ldi r24, 0x06 */
+ 0x80, 0x93, 0xc2, 0x00, /* sts 0x00C2, r24 ; Set the data bits to 8 */
+ 0x84, 0xe5, /* ldi r24, 0x54 */
+ 0x80, 0x93, 0xc6, 0x00, /* sts 0x00C6, r24 ; Output 'T' */
+};
+
static const uint8_t kernel_mcf5208[] = {
0x41, 0xf9, 0xfc, 0x06, 0x00, 0x00, /* lea 0xfc060000,%a0 */
0x10, 0x3c, 0x00, 0x54, /* move.b #'T',%d0 */
@@ -103,6 +112,8 @@ typedef struct testdef {
static testdef_t tests[] = {
{ "alpha", "clipper", "", "PCI:" },
+ { "avr", "arduino-duemilanove", "", "T", sizeof(bios_avr), NULL, bios_avr },
+ { "avr", "arduino-mega-2560-v3", "", "T", sizeof(bios_avr), NULL, bios_avr},
{ "ppc", "ppce500", "", "U-Boot" },
{ "ppc", "40p", "-vga none -boot d", "Trying cd:," },
{ "ppc", "g3beige", "", "PowerPC,750" },
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 28/29] tests/acceptance: Test the Arduino MEGA2560 board
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (26 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 27/29] tests/boot-serial-test: Test some Arduino boards (AVR based) Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:03 ` [PATCH rc4 29/29] .travis.yml: Run the AVR acceptance tests Aleksandar Markovic
` (2 subsequent siblings)
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Michael Rolnik, Philippe Mathieu-Daudé,
Aleksandar Markovic
From: Michael Rolnik <mrolnik@gmail.com>
The test is based on
https://github.com/seharris/qemu-avr-tests/tree/master/free-rtos/Demo
demo which. If working correctly, prints 'ABCDEFGHIJKLMNOPQRSTUVWX' out.
it also demostrates that timer and IRQ are working
As the path name demonstrates, the FreeRTOS tests target a
board based on a ATMega2560 MCU. We have one, the Arduino
MEGA2560.
Complementary documentation:
https://feilipu.me/2012/01/15/ethermega-arduino-mega-2560-and-freertos/
https://feilipu.me/2015/11/24/arduino_freertos/ (see 'Compatibility')
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash multiple avocado fixups from f4bug]
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
tests/acceptance/machine_avr6.py | 50 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 tests/acceptance/machine_avr6.py
diff --git a/tests/acceptance/machine_avr6.py b/tests/acceptance/machine_avr6.py
new file mode 100644
index 0000000..b644d2a
--- /dev/null
+++ b/tests/acceptance/machine_avr6.py
@@ -0,0 +1,50 @@
+#
+# QEMU AVR
+#
+# Copyright (c) 2019 Michael Rolnik <mrolnik@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+import time
+
+from avocado_qemu import Test
+
+class AVR6Machine(Test):
+ timeout = 5
+
+ def test_freertos(self):
+ """
+ :avocado: tags=arch:avr
+ :avocado: tags=machine:arduino-mega-2560-v3
+ """
+ """
+ https://github.com/seharris/qemu-avr-tests/raw/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf
+ constantly prints out 'ABCDEFGHIJKLMNOPQRSTUVWXABCDEFGHIJKLMNOPQRSTUVWX'
+ """
+ rom_url = ('https://github.com/seharris/qemu-avr-tests'
+ '/raw/36c3e67b8755dcf/free-rtos/Demo'
+ '/AVR_ATMega2560_GCC/demo.elf')
+ rom_hash = '7eb521f511ca8f2622e0a3c5e8dd686efbb911d4'
+ rom_path = self.fetch_asset(rom_url, asset_hash=rom_hash)
+
+ self.vm.add_args('-bios', rom_path)
+ self.vm.add_args('-nographic')
+ self.vm.launch()
+
+ time.sleep(2)
+ self.vm.shutdown()
+
+ self.assertIn('ABCDEFGHIJKLMNOPQRSTUVWXABCDEFGHIJKLMNOPQRSTUVWX',
+ self.vm.get_log())
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* [PATCH rc4 29/29] .travis.yml: Run the AVR acceptance tests
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (27 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 28/29] tests/acceptance: Test the Arduino MEGA2560 board Aleksandar Markovic
@ 2020-01-31 0:03 ` Aleksandar Markovic
2020-01-31 0:12 ` [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
2020-01-31 1:09 ` [PATCH 0/2] !fixup target/avr merger-rc4 Philippe Mathieu-Daudé
30 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:03 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Philippe Mathieu-Daudé, Aleksandar Markovic
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have one test so far, and it is very fast:
$ avocado --show=app run -t arch:avr tests/acceptance/
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.30 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
---
.travis.yml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/.travis.yml b/.travis.yml
index 1ae645e..71390e2 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -268,7 +268,7 @@ matrix:
# Acceptance (Functional) tests
- env:
- - CONFIG="--python=/usr/bin/python3 --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu,ppc-softmmu,ppc64-softmmu,m68k-softmmu,sparc-softmmu"
+ - CONFIG="--python=/usr/bin/python3 --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu,ppc-softmmu,ppc64-softmmu,m68k-softmmu,sparc-softmmu,avr-softmmu"
- TEST_CMD="make check-acceptance"
after_script:
- python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
--
2.7.4
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH rc4 00/29] target/avr merger
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (28 preceding siblings ...)
2020-01-31 0:03 ` [PATCH rc4 29/29] .travis.yml: Run the AVR acceptance tests Aleksandar Markovic
@ 2020-01-31 0:12 ` Aleksandar Markovic
2020-01-31 1:23 ` Philippe Mathieu-Daudé
2020-01-31 1:09 ` [PATCH 0/2] !fixup target/avr merger-rc4 Philippe Mathieu-Daudé
30 siblings, 1 reply; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 0:12 UTC (permalink / raw)
To: Aleksandar Markovic, Michael Rolnik, Philippe Mathieu-Daudé,
Philippe Mathieu-Daudé
Cc: QEMU Developers, Aleksandar Markovic
Michael, Philippe,
Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should
be functionally 100% equivalent.
Thank you,
Aleksandar
On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic
<aleksandar.markovic@rt-rk.com> wrote:
>
> From: Aleksandar Markovic <amarkovic@wavecomp.com>
>
> This is the AVR port from Michael, release (merge) candidate 4.
>
> The series can be found also in this repository:
>
> https://github.com/AMarkovic/qemu-avr-merger-rc4
>
> History:
>
> Since v3:
>
> - Removed a patch on load_elf() modification, since it has been merged
> - Removed references to CONFIG_USER_ONLY and provided a guard against
> building lunux user mode for AVR
> - Removed all references to 'Atmel' (including file renames)
> - Rebased the code (there was common interface change regarding 'props')
> - Various corrections of commit messages
> - A bit field for AVRFeatures is nor 64 bit long
> - Other minor fixes
>
> Since v2:
>
> - First patch is split into six smaller logical units (net result
> remains the same)
> - Patch "hw/core/loader: Let load_elf populate the processor-specific
> flags" was redone to reflect the original intent that was lost in
> transalation between multiple autors
> - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was
> corrected only in one line to rectify type of "e_flags"
> - Patch "target/avr: Add section about AVR into QEMU documentation"
> - Spurious <message-Id:> elements were removed
> - The series was rebased to the latest code
>
> Since v1:
>
> - Addressed Thomas comments
> - Fixed a non-critical bug in ATmega (incorrect SRAM base address)
> - Added ELF parsing requested by Aleksandar
> - Dropped default machine (as with the ARM port)
>
> Michael Rolnik (25):
> target/avr: Add basic parameters for new AVR platform
> target/avr: Introduce AVR CPU class object
> target/avr: Add migration support
> target/avr: Add GDB support
> target/avr: Introduce enumeration AVRFeature
> target/avr: Add defintions of AVR core types
> target/avr: Add instruction helpers
> target/avr: Add instruction translation - Register definitions
> target/avr: Add instruction translation - Arithmetic and Logic
> Instructions
> target/avr: Add instruction translation - Branch Instructions
> target/avr: Add instruction translation - Data Transfer Instructions
> target/avr: Add instruction translation - Bit and Bit-test
> Instructions
> target/avr: Add instruction translation - MCU Control Instructions
> target/avr: Add instruction translation - CPU main translation
> function
> target/avr: Add instruction disassembly function
> hw/char: Add limited support for AVR USART peripheral
> hw/timer: Add limited support for AVR 16-bit timer peripheral
> hw/misc: Add limited support for AVR power device
> target/avr: Add section about AVR into QEMU documentation
> target/avr: Register AVR support with the rest of QEMU
> target/avr: Add machine none test
> target/avr: Update MAINTAINERS file
> target/avr: Update build system
> tests/boot-serial-test: Test some Arduino boards (AVR based)
> tests/acceptance: Test the Arduino MEGA2560 board
>
> Philippe Mathieu-Daudé (4):
> hw/avr: Add helper to load raw/ELF firmware binaries
> hw/avr: Add some ATmega microcontrollers
> hw/avr: Add some Arduino boards
> .travis.yml: Run the AVR acceptance tests
>
> .travis.yml | 2 +-
> MAINTAINERS | 31 +
> arch_init.c | 2 +
> configure | 7 +
> default-configs/avr-softmmu.mak | 5 +
> gdb-xml/avr-cpu.xml | 49 +
> hw/avr/Kconfig | 9 +
> hw/avr/Makefile.objs | 3 +
> hw/avr/arduino.c | 151 ++
> hw/avr/atmega.c | 470 ++++++
> hw/avr/atmega.h | 48 +
> hw/avr/boot.c | 74 +
> hw/avr/boot.h | 33 +
> hw/char/Kconfig | 3 +
> hw/char/Makefile.objs | 1 +
> hw/char/avr_usart.c | 320 ++++
> hw/misc/Kconfig | 3 +
> hw/misc/Makefile.objs | 2 +
> hw/misc/avr_power.c | 112 ++
> hw/timer/Kconfig | 3 +
> hw/timer/Makefile.objs | 2 +
> hw/timer/avr_timer16.c | 604 ++++++++
> include/disas/dis-asm.h | 19 +
> include/elf.h | 2 +
> include/hw/char/avr_usart.h | 93 ++
> include/hw/misc/avr_power.h | 46 +
> include/hw/timer/avr_timer16.h | 94 ++
> include/sysemu/arch_init.h | 1 +
> qapi/machine.json | 3 +-
> qemu-doc.texi | 51 +
> target/avr/Makefile.objs | 34 +
> target/avr/cpu-param.h | 37 +
> target/avr/cpu-qom.h | 54 +
> target/avr/cpu.c | 818 +++++++++++
> target/avr/cpu.h | 259 ++++
> target/avr/disas.c | 246 ++++
> target/avr/gdbstub.c | 84 ++
> target/avr/helper.c | 342 +++++
> target/avr/helper.h | 29 +
> target/avr/insn.decode | 182 +++
> target/avr/machine.c | 121 ++
> target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++++++++++
> tests/acceptance/machine_avr6.py | 50 +
> tests/qtest/Makefile.include | 2 +
> tests/qtest/boot-serial-test.c | 11 +
> tests/qtest/machine-none-test.c | 1 +
> 46 files changed, 7508 insertions(+), 2 deletions(-)
> create mode 100644 default-configs/avr-softmmu.mak
> create mode 100644 gdb-xml/avr-cpu.xml
> create mode 100644 hw/avr/Kconfig
> create mode 100644 hw/avr/Makefile.objs
> create mode 100644 hw/avr/arduino.c
> create mode 100644 hw/avr/atmega.c
> create mode 100644 hw/avr/atmega.h
> create mode 100644 hw/avr/boot.c
> create mode 100644 hw/avr/boot.h
> create mode 100644 hw/char/avr_usart.c
> create mode 100644 hw/misc/avr_power.c
> create mode 100644 hw/timer/avr_timer16.c
> create mode 100644 include/hw/char/avr_usart.h
> create mode 100644 include/hw/misc/avr_power.h
> create mode 100644 include/hw/timer/avr_timer16.h
> create mode 100644 target/avr/Makefile.objs
> create mode 100644 target/avr/cpu-param.h
> create mode 100644 target/avr/cpu-qom.h
> create mode 100644 target/avr/cpu.c
> create mode 100644 target/avr/cpu.h
> create mode 100644 target/avr/disas.c
> create mode 100644 target/avr/gdbstub.c
> create mode 100644 target/avr/helper.c
> create mode 100644 target/avr/helper.h
> create mode 100644 target/avr/insn.decode
> create mode 100644 target/avr/machine.c
> create mode 100644 target/avr/translate.c
> create mode 100644 tests/acceptance/machine_avr6.py
>
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH rc4 00/29] target/avr merger
2020-01-31 0:12 ` [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
@ 2020-01-31 1:23 ` Philippe Mathieu-Daudé
2020-01-31 14:43 ` Michael Rolnik
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 1:23 UTC (permalink / raw)
To: Aleksandar Markovic, Aleksandar Markovic, Michael Rolnik,
Philippe Mathieu-Daudé
Cc: QEMU Developers, Aleksandar Markovic
On 1/31/20 1:12 AM, Aleksandar Markovic wrote:
> Michael, Philippe,
>
> Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should
> be functionally 100% equivalent.
Tested OK.
git-backport-diff with rc2:
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences,
respectively
001/31:[down] 'target/avr: Add basic parameters for new AVR platform'
002/31:[down] 'target/avr: Introduce AVR CPU class object'
003/31:[down] 'target/avr: Add migration support'
004/31:[down] 'target/avr: Add GDB support'
005/31:[down] 'target/avr: Introduce enumeration AVRFeature'
006/31:[down] 'target/avr: Add defintions of AVR core types'
007/31:[0148] [FC] 'target/avr: Add instruction helpers'
008/31:[down] 'target/avr: Add instruction translation - Register
definitions'
009/31:[----] [--] 'target/avr: Add instruction translation - Arithmetic
and Logic Instructions'
010/31:[----] [--] 'target/avr: Add instruction translation - Branch
Instructions'
011/31:[----] [--] 'target/avr: Add instruction translation - Data
Transfer Instructions'
012/31:[----] [--] 'target/avr: Add instruction translation - Bit and
Bit-test Instructions'
013/31:[----] [--] 'target/avr: Add instruction translation - MCU
Control Instructions'
014/31:[----] [--] 'target/avr: Add instruction translation - CPU main
translation function'
015/31:[----] [--] 'target/avr: Add instruction disassembly function'
016/31:[down] 'hw/char: Add limited support for AVR USART peripheral'
017/31:[down] 'hw/timer: Add limited support for AVR 16-bit timer
peripheral'
018/31:[down] 'hw/misc: Add limited support for AVR power device'
019/31:[0012] [FC] 'target/avr: Add section about AVR into QEMU
documentation'
020/31:[0002] [FC] 'target/avr: Register AVR support with the rest of QEMU'
021/31:[----] [--] 'target/avr: Add machine none test'
022/31:[0014] [FC] 'target/avr: Update MAINTAINERS file'
023/31:[0002] [FC] 'hw/avr: Add helper to load raw/ELF firmware binaries'
024/31:[0026] [FC] 'hw/avr: Add some ATmega microcontrollers'
025/31:[0009] [FC] 'hw/avr: Add some Arduino boards'
026/31:[----] [--] 'target/avr: Update build system'
027/31:[----] [--] 'tests/boot-serial-test: Test some Arduino boards
(AVR based)'
028/31:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560 board'
029/31:[----] [--] '.travis.yml: Run the AVR acceptance tests'
030/31:[down] '!fixup "hw/misc: Add limited support for AVR power device"'
031/31:[down] '!fixup "hw/timer: Add limited support for AVR 16-bit
timer peripheral"'
One thing that annoys me is we ignored the review comments from Joaquin,
but I think it might now be easier to address them as new patches, once
this series is merged.
I made 2 comments (definitions in incorrect patch, and definition
misplaced in elf.h), and sent 2 patches converting the PRINTF() to
trace-events. Thanks for preparing the rc4, hopefully we are done!
>
> Thank you,
> Aleksandar
>
> On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic
> <aleksandar.markovic@rt-rk.com> wrote:
>>
>> From: Aleksandar Markovic <amarkovic@wavecomp.com>
>>
>> This is the AVR port from Michael, release (merge) candidate 4.
>>
>> The series can be found also in this repository:
>>
>> https://github.com/AMarkovic/qemu-avr-merger-rc4
>>
>> History:
>>
>> Since v3:
>>
>> - Removed a patch on load_elf() modification, since it has been merged
>> - Removed references to CONFIG_USER_ONLY and provided a guard against
>> building lunux user mode for AVR
>> - Removed all references to 'Atmel' (including file renames)
>> - Rebased the code (there was common interface change regarding 'props')
>> - Various corrections of commit messages
>> - A bit field for AVRFeatures is nor 64 bit long
>> - Other minor fixes
>>
>> Since v2:
>>
>> - First patch is split into six smaller logical units (net result
>> remains the same)
>> - Patch "hw/core/loader: Let load_elf populate the processor-specific
>> flags" was redone to reflect the original intent that was lost in
>> transalation between multiple autors
>> - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was
>> corrected only in one line to rectify type of "e_flags"
>> - Patch "target/avr: Add section about AVR into QEMU documentation"
>> - Spurious <message-Id:> elements were removed
>> - The series was rebased to the latest code
>>
>> Since v1:
>>
>> - Addressed Thomas comments
>> - Fixed a non-critical bug in ATmega (incorrect SRAM base address)
>> - Added ELF parsing requested by Aleksandar
>> - Dropped default machine (as with the ARM port)
>>
>> Michael Rolnik (25):
>> target/avr: Add basic parameters for new AVR platform
>> target/avr: Introduce AVR CPU class object
>> target/avr: Add migration support
>> target/avr: Add GDB support
>> target/avr: Introduce enumeration AVRFeature
>> target/avr: Add defintions of AVR core types
>> target/avr: Add instruction helpers
>> target/avr: Add instruction translation - Register definitions
>> target/avr: Add instruction translation - Arithmetic and Logic
>> Instructions
>> target/avr: Add instruction translation - Branch Instructions
>> target/avr: Add instruction translation - Data Transfer Instructions
>> target/avr: Add instruction translation - Bit and Bit-test
>> Instructions
>> target/avr: Add instruction translation - MCU Control Instructions
>> target/avr: Add instruction translation - CPU main translation
>> function
>> target/avr: Add instruction disassembly function
>> hw/char: Add limited support for AVR USART peripheral
>> hw/timer: Add limited support for AVR 16-bit timer peripheral
>> hw/misc: Add limited support for AVR power device
>> target/avr: Add section about AVR into QEMU documentation
>> target/avr: Register AVR support with the rest of QEMU
>> target/avr: Add machine none test
>> target/avr: Update MAINTAINERS file
>> target/avr: Update build system
>> tests/boot-serial-test: Test some Arduino boards (AVR based)
>> tests/acceptance: Test the Arduino MEGA2560 board
>>
>> Philippe Mathieu-Daudé (4):
>> hw/avr: Add helper to load raw/ELF firmware binaries
>> hw/avr: Add some ATmega microcontrollers
>> hw/avr: Add some Arduino boards
>> .travis.yml: Run the AVR acceptance tests
>>
>> .travis.yml | 2 +-
>> MAINTAINERS | 31 +
>> arch_init.c | 2 +
>> configure | 7 +
>> default-configs/avr-softmmu.mak | 5 +
>> gdb-xml/avr-cpu.xml | 49 +
>> hw/avr/Kconfig | 9 +
>> hw/avr/Makefile.objs | 3 +
>> hw/avr/arduino.c | 151 ++
>> hw/avr/atmega.c | 470 ++++++
>> hw/avr/atmega.h | 48 +
>> hw/avr/boot.c | 74 +
>> hw/avr/boot.h | 33 +
>> hw/char/Kconfig | 3 +
>> hw/char/Makefile.objs | 1 +
>> hw/char/avr_usart.c | 320 ++++
>> hw/misc/Kconfig | 3 +
>> hw/misc/Makefile.objs | 2 +
>> hw/misc/avr_power.c | 112 ++
>> hw/timer/Kconfig | 3 +
>> hw/timer/Makefile.objs | 2 +
>> hw/timer/avr_timer16.c | 604 ++++++++
>> include/disas/dis-asm.h | 19 +
>> include/elf.h | 2 +
>> include/hw/char/avr_usart.h | 93 ++
>> include/hw/misc/avr_power.h | 46 +
>> include/hw/timer/avr_timer16.h | 94 ++
>> include/sysemu/arch_init.h | 1 +
>> qapi/machine.json | 3 +-
>> qemu-doc.texi | 51 +
>> target/avr/Makefile.objs | 34 +
>> target/avr/cpu-param.h | 37 +
>> target/avr/cpu-qom.h | 54 +
>> target/avr/cpu.c | 818 +++++++++++
>> target/avr/cpu.h | 259 ++++
>> target/avr/disas.c | 246 ++++
>> target/avr/gdbstub.c | 84 ++
>> target/avr/helper.c | 342 +++++
>> target/avr/helper.h | 29 +
>> target/avr/insn.decode | 182 +++
>> target/avr/machine.c | 121 ++
>> target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++++++++++
>> tests/acceptance/machine_avr6.py | 50 +
>> tests/qtest/Makefile.include | 2 +
>> tests/qtest/boot-serial-test.c | 11 +
>> tests/qtest/machine-none-test.c | 1 +
>> 46 files changed, 7508 insertions(+), 2 deletions(-)
>> create mode 100644 default-configs/avr-softmmu.mak
>> create mode 100644 gdb-xml/avr-cpu.xml
>> create mode 100644 hw/avr/Kconfig
>> create mode 100644 hw/avr/Makefile.objs
>> create mode 100644 hw/avr/arduino.c
>> create mode 100644 hw/avr/atmega.c
>> create mode 100644 hw/avr/atmega.h
>> create mode 100644 hw/avr/boot.c
>> create mode 100644 hw/avr/boot.h
>> create mode 100644 hw/char/avr_usart.c
>> create mode 100644 hw/misc/avr_power.c
>> create mode 100644 hw/timer/avr_timer16.c
>> create mode 100644 include/hw/char/avr_usart.h
>> create mode 100644 include/hw/misc/avr_power.h
>> create mode 100644 include/hw/timer/avr_timer16.h
>> create mode 100644 target/avr/Makefile.objs
>> create mode 100644 target/avr/cpu-param.h
>> create mode 100644 target/avr/cpu-qom.h
>> create mode 100644 target/avr/cpu.c
>> create mode 100644 target/avr/cpu.h
>> create mode 100644 target/avr/disas.c
>> create mode 100644 target/avr/gdbstub.c
>> create mode 100644 target/avr/helper.c
>> create mode 100644 target/avr/helper.h
>> create mode 100644 target/avr/insn.decode
>> create mode 100644 target/avr/machine.c
>> create mode 100644 target/avr/translate.c
>> create mode 100644 tests/acceptance/machine_avr6.py
>>
>> --
>> 2.7.4
>>
>>
>
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH rc4 00/29] target/avr merger
2020-01-31 1:23 ` Philippe Mathieu-Daudé
@ 2020-01-31 14:43 ` Michael Rolnik
0 siblings, 0 replies; 70+ messages in thread
From: Michael Rolnik @ 2020-01-31 14:43 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Aleksandar Markovic, Aleksandar Markovic,
Philippe Mathieu-Daudé,
Aleksandar Markovic, QEMU Developers
[-- Attachment #1: Type: text/plain, Size: 10856 bytes --]
Looks good. Thanks
On Fri, Jan 31, 2020 at 3:24 AM Philippe Mathieu-Daudé <philmd@redhat.com>
wrote:
> On 1/31/20 1:12 AM, Aleksandar Markovic wrote:
> > Michael, Philippe,
> >
> > Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should
> > be functionally 100% equivalent.
>
> Tested OK.
>
> git-backport-diff with rc2:
>
> Key:
> [----] : patches are identical
> [####] : number of functional differences between upstream/downstream patch
> [down] : patch is downstream-only
> The flags [FC] indicate (F)unctional and (C)ontextual differences,
> respectively
>
> 001/31:[down] 'target/avr: Add basic parameters for new AVR platform'
> 002/31:[down] 'target/avr: Introduce AVR CPU class object'
> 003/31:[down] 'target/avr: Add migration support'
> 004/31:[down] 'target/avr: Add GDB support'
> 005/31:[down] 'target/avr: Introduce enumeration AVRFeature'
> 006/31:[down] 'target/avr: Add defintions of AVR core types'
> 007/31:[0148] [FC] 'target/avr: Add instruction helpers'
> 008/31:[down] 'target/avr: Add instruction translation - Register
> definitions'
> 009/31:[----] [--] 'target/avr: Add instruction translation - Arithmetic
> and Logic Instructions'
> 010/31:[----] [--] 'target/avr: Add instruction translation - Branch
> Instructions'
> 011/31:[----] [--] 'target/avr: Add instruction translation - Data
> Transfer Instructions'
> 012/31:[----] [--] 'target/avr: Add instruction translation - Bit and
> Bit-test Instructions'
> 013/31:[----] [--] 'target/avr: Add instruction translation - MCU
> Control Instructions'
> 014/31:[----] [--] 'target/avr: Add instruction translation - CPU main
> translation function'
> 015/31:[----] [--] 'target/avr: Add instruction disassembly function'
> 016/31:[down] 'hw/char: Add limited support for AVR USART peripheral'
> 017/31:[down] 'hw/timer: Add limited support for AVR 16-bit timer
> peripheral'
> 018/31:[down] 'hw/misc: Add limited support for AVR power device'
> 019/31:[0012] [FC] 'target/avr: Add section about AVR into QEMU
> documentation'
> 020/31:[0002] [FC] 'target/avr: Register AVR support with the rest of QEMU'
> 021/31:[----] [--] 'target/avr: Add machine none test'
> 022/31:[0014] [FC] 'target/avr: Update MAINTAINERS file'
> 023/31:[0002] [FC] 'hw/avr: Add helper to load raw/ELF firmware binaries'
> 024/31:[0026] [FC] 'hw/avr: Add some ATmega microcontrollers'
> 025/31:[0009] [FC] 'hw/avr: Add some Arduino boards'
> 026/31:[----] [--] 'target/avr: Update build system'
> 027/31:[----] [--] 'tests/boot-serial-test: Test some Arduino boards
> (AVR based)'
> 028/31:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560 board'
> 029/31:[----] [--] '.travis.yml: Run the AVR acceptance tests'
> 030/31:[down] '!fixup "hw/misc: Add limited support for AVR power device"'
> 031/31:[down] '!fixup "hw/timer: Add limited support for AVR 16-bit
> timer peripheral"'
>
> One thing that annoys me is we ignored the review comments from Joaquin,
> but I think it might now be easier to address them as new patches, once
> this series is merged.
>
> I made 2 comments (definitions in incorrect patch, and definition
> misplaced in elf.h), and sent 2 patches converting the PRINTF() to
> trace-events. Thanks for preparing the rc4, hopefully we are done!
>
> >
> > Thank you,
> > Aleksandar
> >
> > On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic
> > <aleksandar.markovic@rt-rk.com> wrote:
> >>
> >> From: Aleksandar Markovic <amarkovic@wavecomp.com>
> >>
> >> This is the AVR port from Michael, release (merge) candidate 4.
> >>
> >> The series can be found also in this repository:
> >>
> >> https://github.com/AMarkovic/qemu-avr-merger-rc4
> >>
> >> History:
> >>
> >> Since v3:
> >>
> >> - Removed a patch on load_elf() modification, since it has been merged
> >> - Removed references to CONFIG_USER_ONLY and provided a guard against
> >> building lunux user mode for AVR
> >> - Removed all references to 'Atmel' (including file renames)
> >> - Rebased the code (there was common interface change regarding 'props')
> >> - Various corrections of commit messages
> >> - A bit field for AVRFeatures is nor 64 bit long
> >> - Other minor fixes
> >>
> >> Since v2:
> >>
> >> - First patch is split into six smaller logical units (net result
> >> remains the same)
> >> - Patch "hw/core/loader: Let load_elf populate the processor-specific
> >> flags" was redone to reflect the original intent that was lost in
> >> transalation between multiple autors
> >> - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was
> >> corrected only in one line to rectify type of "e_flags"
> >> - Patch "target/avr: Add section about AVR into QEMU documentation"
> >> - Spurious <message-Id:> elements were removed
> >> - The series was rebased to the latest code
> >>
> >> Since v1:
> >>
> >> - Addressed Thomas comments
> >> - Fixed a non-critical bug in ATmega (incorrect SRAM base address)
> >> - Added ELF parsing requested by Aleksandar
> >> - Dropped default machine (as with the ARM port)
> >>
> >> Michael Rolnik (25):
> >> target/avr: Add basic parameters for new AVR platform
> >> target/avr: Introduce AVR CPU class object
> >> target/avr: Add migration support
> >> target/avr: Add GDB support
> >> target/avr: Introduce enumeration AVRFeature
> >> target/avr: Add defintions of AVR core types
> >> target/avr: Add instruction helpers
> >> target/avr: Add instruction translation - Register definitions
> >> target/avr: Add instruction translation - Arithmetic and Logic
> >> Instructions
> >> target/avr: Add instruction translation - Branch Instructions
> >> target/avr: Add instruction translation - Data Transfer Instructions
> >> target/avr: Add instruction translation - Bit and Bit-test
> >> Instructions
> >> target/avr: Add instruction translation - MCU Control Instructions
> >> target/avr: Add instruction translation - CPU main translation
> >> function
> >> target/avr: Add instruction disassembly function
> >> hw/char: Add limited support for AVR USART peripheral
> >> hw/timer: Add limited support for AVR 16-bit timer peripheral
> >> hw/misc: Add limited support for AVR power device
> >> target/avr: Add section about AVR into QEMU documentation
> >> target/avr: Register AVR support with the rest of QEMU
> >> target/avr: Add machine none test
> >> target/avr: Update MAINTAINERS file
> >> target/avr: Update build system
> >> tests/boot-serial-test: Test some Arduino boards (AVR based)
> >> tests/acceptance: Test the Arduino MEGA2560 board
> >>
> >> Philippe Mathieu-Daudé (4):
> >> hw/avr: Add helper to load raw/ELF firmware binaries
> >> hw/avr: Add some ATmega microcontrollers
> >> hw/avr: Add some Arduino boards
> >> .travis.yml: Run the AVR acceptance tests
> >>
> >> .travis.yml | 2 +-
> >> MAINTAINERS | 31 +
> >> arch_init.c | 2 +
> >> configure | 7 +
> >> default-configs/avr-softmmu.mak | 5 +
> >> gdb-xml/avr-cpu.xml | 49 +
> >> hw/avr/Kconfig | 9 +
> >> hw/avr/Makefile.objs | 3 +
> >> hw/avr/arduino.c | 151 ++
> >> hw/avr/atmega.c | 470 ++++++
> >> hw/avr/atmega.h | 48 +
> >> hw/avr/boot.c | 74 +
> >> hw/avr/boot.h | 33 +
> >> hw/char/Kconfig | 3 +
> >> hw/char/Makefile.objs | 1 +
> >> hw/char/avr_usart.c | 320 ++++
> >> hw/misc/Kconfig | 3 +
> >> hw/misc/Makefile.objs | 2 +
> >> hw/misc/avr_power.c | 112 ++
> >> hw/timer/Kconfig | 3 +
> >> hw/timer/Makefile.objs | 2 +
> >> hw/timer/avr_timer16.c | 604 ++++++++
> >> include/disas/dis-asm.h | 19 +
> >> include/elf.h | 2 +
> >> include/hw/char/avr_usart.h | 93 ++
> >> include/hw/misc/avr_power.h | 46 +
> >> include/hw/timer/avr_timer16.h | 94 ++
> >> include/sysemu/arch_init.h | 1 +
> >> qapi/machine.json | 3 +-
> >> qemu-doc.texi | 51 +
> >> target/avr/Makefile.objs | 34 +
> >> target/avr/cpu-param.h | 37 +
> >> target/avr/cpu-qom.h | 54 +
> >> target/avr/cpu.c | 818 +++++++++++
> >> target/avr/cpu.h | 259 ++++
> >> target/avr/disas.c | 246 ++++
> >> target/avr/gdbstub.c | 84 ++
> >> target/avr/helper.c | 342 +++++
> >> target/avr/helper.h | 29 +
> >> target/avr/insn.decode | 182 +++
> >> target/avr/machine.c | 121 ++
> >> target/avr/translate.c | 2997
> ++++++++++++++++++++++++++++++++++++++
> >> tests/acceptance/machine_avr6.py | 50 +
> >> tests/qtest/Makefile.include | 2 +
> >> tests/qtest/boot-serial-test.c | 11 +
> >> tests/qtest/machine-none-test.c | 1 +
> >> 46 files changed, 7508 insertions(+), 2 deletions(-)
> >> create mode 100644 default-configs/avr-softmmu.mak
> >> create mode 100644 gdb-xml/avr-cpu.xml
> >> create mode 100644 hw/avr/Kconfig
> >> create mode 100644 hw/avr/Makefile.objs
> >> create mode 100644 hw/avr/arduino.c
> >> create mode 100644 hw/avr/atmega.c
> >> create mode 100644 hw/avr/atmega.h
> >> create mode 100644 hw/avr/boot.c
> >> create mode 100644 hw/avr/boot.h
> >> create mode 100644 hw/char/avr_usart.c
> >> create mode 100644 hw/misc/avr_power.c
> >> create mode 100644 hw/timer/avr_timer16.c
> >> create mode 100644 include/hw/char/avr_usart.h
> >> create mode 100644 include/hw/misc/avr_power.h
> >> create mode 100644 include/hw/timer/avr_timer16.h
> >> create mode 100644 target/avr/Makefile.objs
> >> create mode 100644 target/avr/cpu-param.h
> >> create mode 100644 target/avr/cpu-qom.h
> >> create mode 100644 target/avr/cpu.c
> >> create mode 100644 target/avr/cpu.h
> >> create mode 100644 target/avr/disas.c
> >> create mode 100644 target/avr/gdbstub.c
> >> create mode 100644 target/avr/helper.c
> >> create mode 100644 target/avr/helper.h
> >> create mode 100644 target/avr/insn.decode
> >> create mode 100644 target/avr/machine.c
> >> create mode 100644 target/avr/translate.c
> >> create mode 100644 tests/acceptance/machine_avr6.py
> >>
> >> --
> >> 2.7.4
> >>
> >>
> >
>
>
--
Best Regards,
Michael Rolnik
[-- Attachment #2: Type: text/html, Size: 13864 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH 0/2] !fixup target/avr merger-rc4
2020-01-31 0:02 [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
` (29 preceding siblings ...)
2020-01-31 0:12 ` [PATCH rc4 00/29] target/avr merger Aleksandar Markovic
@ 2020-01-31 1:09 ` Philippe Mathieu-Daudé
2020-01-31 1:09 ` [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device" Philippe Mathieu-Daudé
` (2 more replies)
30 siblings, 3 replies; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 1:09 UTC (permalink / raw)
To: qemu-devel
Cc: Sarah Harris, Philippe Mathieu-Daudé,
Aleksandar Markovic, Michael Rolnik, Aleksandar Markovic,
Alex Bennée, Aleksandar Markovic
Aleksandar, I addressed Alex Bennée comment as fixup, so you
can squash directly. See:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg673846.html
- convert DB_PRINT() to trace-events
- fix style/indentation
Based-on: <1580428993-4767-1-git-send-email-aleksandar.markovic@rt-rk.com>
Philippe Mathieu-Daudé (2):
!fixup "hw/misc: Add limited support for AVR power device"
!fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral"
hw/misc/avr_power.c | 17 +++++++++--------
hw/timer/avr_timer16.c | 25 +++++++++++++++----------
hw/misc/trace-events | 4 ++++
hw/timer/trace-events | 12 ++++++++++++
4 files changed, 40 insertions(+), 18 deletions(-)
--
2.21.1
^ permalink raw reply [flat|nested] 70+ messages in thread* [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device"
2020-01-31 1:09 ` [PATCH 0/2] !fixup target/avr merger-rc4 Philippe Mathieu-Daudé
@ 2020-01-31 1:09 ` Philippe Mathieu-Daudé
2020-01-31 11:27 ` Alex Bennée
2020-01-31 1:09 ` [PATCH 2/2] !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral" Philippe Mathieu-Daudé
2020-01-31 1:12 ` [PATCH 0/2] !fixup target/avr merger-rc4 Aleksandar Markovic
2 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 1:09 UTC (permalink / raw)
To: qemu-devel
Cc: Sarah Harris, Philippe Mathieu-Daudé,
Aleksandar Markovic, Michael Rolnik, Aleksandar Markovic,
Alex Bennée, Aleksandar Markovic
- convert DB_PRINT() to trace-events
- fix style/indentation
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/misc/avr_power.c | 17 +++++++++--------
hw/misc/trace-events | 4 ++++
2 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
index 598bc7279c..65ff7c4405 100644
--- a/hw/misc/avr_power.c
+++ b/hw/misc/avr_power.c
@@ -27,9 +27,7 @@
#include "qemu/log.h"
#include "hw/qdev-properties.h"
#include "hw/irq.h"
-
-#define DB_PRINT(fmt, args...) /* Nothing */
-/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
+#include "trace.h"
static void avr_mask_reset(DeviceState *dev)
{
@@ -48,19 +46,20 @@ static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
assert(offset == 0);
AVRMaskState *s = opaque;
+ trace_avr_power_read(s->val);
+
return (uint64_t)s->val;
}
static void avr_mask_write(void *opaque, hwaddr offset,
- uint64_t val64, unsigned size)
+ uint64_t val64, unsigned size)
{
assert(size == 1);
assert(offset == 0);
AVRMaskState *s = opaque;
uint8_t val8 = val64;
- DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
-
+ trace_avr_power_write(val8);
s->val = val8;
for (int i = 0; i < 8; i++) {
qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
@@ -71,7 +70,9 @@ static const MemoryRegionOps avr_mask_ops = {
.read = avr_mask_read,
.write = avr_mask_write,
.endianness = DEVICE_NATIVE_ENDIAN,
- .impl = {.max_access_size = 1}
+ .impl = {
+ .max_access_size = 1,
+ },
};
static void avr_mask_init(Object *dev)
@@ -80,7 +81,7 @@ static void avr_mask_init(Object *dev)
SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
- 0x01);
+ 0x01);
sysbus_init_mmio(busdev, &s->iomem);
for (int i = 0; i < 8; i++) {
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 7f0f5dff3a..f716881bb1 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -179,3 +179,7 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u value=0x%02x"
via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
+
+# avr_power.c
+avr_power_read(uint8_t value) "power_reduc read value:%u"
+avr_power_write(uint8_t value) "power_reduc write value:%u"
--
2.21.1
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device"
2020-01-31 1:09 ` [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device" Philippe Mathieu-Daudé
@ 2020-01-31 11:27 ` Alex Bennée
2020-01-31 12:39 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 70+ messages in thread
From: Alex Bennée @ 2020-01-31 11:27 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Sarah Harris, qemu-devel, Aleksandar Markovic, Michael Rolnik,
Aleksandar Markovic, Aleksandar Markovic
Philippe Mathieu-Daudé <philmd@redhat.com> writes:
> - convert DB_PRINT() to trace-events
> - fix style/indentation
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/misc/avr_power.c | 17 +++++++++--------
> hw/misc/trace-events | 4 ++++
> 2 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
> index 598bc7279c..65ff7c4405 100644
> --- a/hw/misc/avr_power.c
> +++ b/hw/misc/avr_power.c
> @@ -27,9 +27,7 @@
> #include "qemu/log.h"
> #include "hw/qdev-properties.h"
> #include "hw/irq.h"
> -
> -#define DB_PRINT(fmt, args...) /* Nothing */
> -/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
> +#include "trace.h"
>
> static void avr_mask_reset(DeviceState *dev)
> {
> @@ -48,19 +46,20 @@ static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
> assert(offset == 0);
> AVRMaskState *s = opaque;
>
> + trace_avr_power_read(s->val);
> +
> return (uint64_t)s->val;
> }
>
> static void avr_mask_write(void *opaque, hwaddr offset,
> - uint64_t val64, unsigned size)
> + uint64_t val64, unsigned size)
> {
> assert(size == 1);
> assert(offset == 0);
> AVRMaskState *s = opaque;
> uint8_t val8 = val64;
>
> - DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> -
> + trace_avr_power_write(val8);
You've dropped offset in this trace point which is probably worth
keeping so you track where is being written to. Same with the read.
> s->val = val8;
> for (int i = 0; i < 8; i++) {
> qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
> @@ -71,7 +70,9 @@ static const MemoryRegionOps avr_mask_ops = {
> .read = avr_mask_read,
> .write = avr_mask_write,
> .endianness = DEVICE_NATIVE_ENDIAN,
> - .impl = {.max_access_size = 1}
> + .impl = {
> + .max_access_size = 1,
> + },
> };
>
> static void avr_mask_init(Object *dev)
> @@ -80,7 +81,7 @@ static void avr_mask_init(Object *dev)
> SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
>
> memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
> - 0x01);
> + 0x01);
> sysbus_init_mmio(busdev, &s->iomem);
>
> for (int i = 0; i < 8; i++) {
> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> index 7f0f5dff3a..f716881bb1 100644
> --- a/hw/misc/trace-events
> +++ b/hw/misc/trace-events
> @@ -179,3 +179,7 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u value=0x%02x"
> via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
> via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
> via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
> +
> +# avr_power.c
> +avr_power_read(uint8_t value) "power_reduc read value:%u"
> +avr_power_write(uint8_t value) "power_reduc write value:%u"
--
Alex Bennée
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device"
2020-01-31 11:27 ` Alex Bennée
@ 2020-01-31 12:39 ` Philippe Mathieu-Daudé
2020-01-31 14:52 ` Alex Bennée
0 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 12:39 UTC (permalink / raw)
To: Alex Bennée
Cc: Sarah Harris, QEMU Developers, Aleksandar Markovic,
Michael Rolnik, Aleksandar Markovic, Aleksandar Markovic
On Fri, Jan 31, 2020 at 12:27 PM Alex Bennée <alex.bennee@linaro.org> wrote:
> Philippe Mathieu-Daudé <philmd@redhat.com> writes:
>
> > - convert DB_PRINT() to trace-events
> > - fix style/indentation
> >
> > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> > ---
> > hw/misc/avr_power.c | 17 +++++++++--------
> > hw/misc/trace-events | 4 ++++
> > 2 files changed, 13 insertions(+), 8 deletions(-)
> >
> > diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
> > index 598bc7279c..65ff7c4405 100644
> > --- a/hw/misc/avr_power.c
> > +++ b/hw/misc/avr_power.c
> > @@ -27,9 +27,7 @@
> > #include "qemu/log.h"
> > #include "hw/qdev-properties.h"
> > #include "hw/irq.h"
> > -
> > -#define DB_PRINT(fmt, args...) /* Nothing */
> > -/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
> > +#include "trace.h"
> >
> > static void avr_mask_reset(DeviceState *dev)
> > {
> > @@ -48,19 +46,20 @@ static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
> > assert(offset == 0);
> > AVRMaskState *s = opaque;
> >
> > + trace_avr_power_read(s->val);
> > +
> > return (uint64_t)s->val;
> > }
> >
> > static void avr_mask_write(void *opaque, hwaddr offset,
> > - uint64_t val64, unsigned size)
> > + uint64_t val64, unsigned size)
> > {
> > assert(size == 1);
> > assert(offset == 0);
> > AVRMaskState *s = opaque;
> > uint8_t val8 = val64;
> >
> > - DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> > -
> > + trace_avr_power_write(val8);
>
> You've dropped offset in this trace point which is probably worth
> keeping so you track where is being written to. Same with the read.
I dropped it because it is always 0x00, the register is 8bit wide. See
below, memory_region_init_io(...,1).
I thought about adding a "name" property so each instance can display
the device it belongs to, but this was too invasive, so I decided to
keep this change for later.
> > s->val = val8;
> > for (int i = 0; i < 8; i++) {
> > qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
> > @@ -71,7 +70,9 @@ static const MemoryRegionOps avr_mask_ops = {
> > .read = avr_mask_read,
> > .write = avr_mask_write,
> > .endianness = DEVICE_NATIVE_ENDIAN,
> > - .impl = {.max_access_size = 1}
> > + .impl = {
> > + .max_access_size = 1,
> > + },
> > };
> >
> > static void avr_mask_init(Object *dev)
> > @@ -80,7 +81,7 @@ static void avr_mask_init(Object *dev)
> > SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
> >
> > memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
> > - 0x01);
> > + 0x01);
^ Region has only 1 address: 0x00.
> > sysbus_init_mmio(busdev, &s->iomem);
> >
> > for (int i = 0; i < 8; i++) {
> > diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> > index 7f0f5dff3a..f716881bb1 100644
> > --- a/hw/misc/trace-events
> > +++ b/hw/misc/trace-events
> > @@ -179,3 +179,7 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u value=0x%02x"
> > via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
> > via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
> > via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
> > +
> > +# avr_power.c
> > +avr_power_read(uint8_t value) "power_reduc read value:%u"
> > +avr_power_write(uint8_t value) "power_reduc write value:%u"
>
>
> --
> Alex Bennée
>
^ permalink raw reply [flat|nested] 70+ messages in thread* Re: [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device"
2020-01-31 12:39 ` Philippe Mathieu-Daudé
@ 2020-01-31 14:52 ` Alex Bennée
0 siblings, 0 replies; 70+ messages in thread
From: Alex Bennée @ 2020-01-31 14:52 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Sarah Harris, QEMU Developers, Aleksandar Markovic,
Michael Rolnik, Aleksandar Markovic, Aleksandar Markovic
Philippe Mathieu-Daudé <philmd@redhat.com> writes:
> On Fri, Jan 31, 2020 at 12:27 PM Alex Bennée <alex.bennee@linaro.org> wrote:
>> Philippe Mathieu-Daudé <philmd@redhat.com> writes:
>>
>> > - convert DB_PRINT() to trace-events
>> > - fix style/indentation
>> >
>> > Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> > ---
>> > hw/misc/avr_power.c | 17 +++++++++--------
>> > hw/misc/trace-events | 4 ++++
>> > 2 files changed, 13 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/hw/misc/avr_power.c b/hw/misc/avr_power.c
>> > index 598bc7279c..65ff7c4405 100644
>> > --- a/hw/misc/avr_power.c
>> > +++ b/hw/misc/avr_power.c
>> > @@ -27,9 +27,7 @@
>> > #include "qemu/log.h"
>> > #include "hw/qdev-properties.h"
>> > #include "hw/irq.h"
>> > -
>> > -#define DB_PRINT(fmt, args...) /* Nothing */
>> > -/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
>> > +#include "trace.h"
>> >
>> > static void avr_mask_reset(DeviceState *dev)
>> > {
>> > @@ -48,19 +46,20 @@ static uint64_t avr_mask_read(void *opaque, hwaddr offset, unsigned size)
>> > assert(offset == 0);
>> > AVRMaskState *s = opaque;
>> >
>> > + trace_avr_power_read(s->val);
>> > +
>> > return (uint64_t)s->val;
>> > }
>> >
>> > static void avr_mask_write(void *opaque, hwaddr offset,
>> > - uint64_t val64, unsigned size)
>> > + uint64_t val64, unsigned size)
>> > {
>> > assert(size == 1);
>> > assert(offset == 0);
>> > AVRMaskState *s = opaque;
>> > uint8_t val8 = val64;
>> >
>> > - DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
>> > -
>> > + trace_avr_power_write(val8);
>>
>> You've dropped offset in this trace point which is probably worth
>> keeping so you track where is being written to. Same with the read.
>
> I dropped it because it is always 0x00, the register is 8bit wide. See
> below, memory_region_init_io(...,1).
> I thought about adding a "name" property so each instance can display
> the device it belongs to, but this was too invasive, so I decided to
> keep this change for later.
Ahh I did wonder (I was reviewing without applying). Might be worth
mentioning in the commit then.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>
>> > s->val = val8;
>> > for (int i = 0; i < 8; i++) {
>> > qemu_set_irq(s->irq[i], (val8 & (1 << i)) != 0);
>> > @@ -71,7 +70,9 @@ static const MemoryRegionOps avr_mask_ops = {
>> > .read = avr_mask_read,
>> > .write = avr_mask_write,
>> > .endianness = DEVICE_NATIVE_ENDIAN,
>> > - .impl = {.max_access_size = 1}
>> > + .impl = {
>> > + .max_access_size = 1,
>> > + },
>> > };
>> >
>> > static void avr_mask_init(Object *dev)
>> > @@ -80,7 +81,7 @@ static void avr_mask_init(Object *dev)
>> > SysBusDevice *busdev = SYS_BUS_DEVICE(dev);
>> >
>> > memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s, TYPE_AVR_MASK,
>> > - 0x01);
>> > + 0x01);
>
> ^ Region has only 1 address: 0x00.
>
>> > sysbus_init_mmio(busdev, &s->iomem);
>> >
>> > for (int i = 0; i < 8; i++) {
>> > diff --git a/hw/misc/trace-events b/hw/misc/trace-events
>> > index 7f0f5dff3a..f716881bb1 100644
>> > --- a/hw/misc/trace-events
>> > +++ b/hw/misc/trace-events
>> > @@ -179,3 +179,7 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u value=0x%02x"
>> > via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
>> > via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
>> > via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
>> > +
>> > +# avr_power.c
>> > +avr_power_read(uint8_t value) "power_reduc read value:%u"
>> > +avr_power_write(uint8_t value) "power_reduc write value:%u"
>>
>>
>> --
>> Alex Bennée
>>
--
Alex Bennée
^ permalink raw reply [flat|nested] 70+ messages in thread
* [PATCH 2/2] !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral"
2020-01-31 1:09 ` [PATCH 0/2] !fixup target/avr merger-rc4 Philippe Mathieu-Daudé
2020-01-31 1:09 ` [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device" Philippe Mathieu-Daudé
@ 2020-01-31 1:09 ` Philippe Mathieu-Daudé
2020-01-31 11:31 ` Alex Bennée
2020-01-31 1:12 ` [PATCH 0/2] !fixup target/avr merger-rc4 Aleksandar Markovic
2 siblings, 1 reply; 70+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-01-31 1:09 UTC (permalink / raw)
To: qemu-devel
Cc: Sarah Harris, Philippe Mathieu-Daudé,
Aleksandar Markovic, Michael Rolnik, Aleksandar Markovic,
Alex Bennée, Aleksandar Markovic
Convert DB_PRINT() to trace events.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/timer/avr_timer16.c | 25 +++++++++++++++----------
hw/timer/trace-events | 12 ++++++++++++
2 files changed, 27 insertions(+), 10 deletions(-)
diff --git a/hw/timer/avr_timer16.c b/hw/timer/avr_timer16.c
index 4e16afc61c..073f36aa76 100644
--- a/hw/timer/avr_timer16.c
+++ b/hw/timer/avr_timer16.c
@@ -36,6 +36,7 @@
#include "qemu/log.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
+#include "trace.h"
/* Register offsets */
#define T16_CRA 0x0
@@ -104,7 +105,6 @@
/* Helper macros */
#define VAL16(l, h) ((h << 8) | l)
#define DB_PRINT(fmt, args...) /* Nothing */
-/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
static inline int64_t avr_timer16_ns_to_ticks(AVRTimer16State *t16, int64_t t)
{
@@ -168,8 +168,8 @@ static void avr_timer16_clksrc_update(AVRTimer16State *t16)
if (divider) {
t16->freq_hz = t16->cpu_freq_hz / divider;
t16->period_ns = NANOSECONDS_PER_SECOND / t16->freq_hz;
- DB_PRINT("Timer frequency %" PRIu64 " hz, period %" PRIu64 " ns (%f s)",
- t16->freq_hz, t16->period_ns, 1 / (double)t16->freq_hz);
+ trace_avr_timer16_clksrc_update(t16->freq_hz, t16->period_ns,
+ (uint64_t)(1e6 / t16->freq_hz));
}
}
@@ -235,8 +235,7 @@ static void avr_timer16_set_alarm(AVRTimer16State *t16)
t16->reset_time_ns + ((CNT(t16) + alarm_offset) * t16->period_ns);
timer_mod(t16->timer, alarm_ns);
- DB_PRINT("next alarm %" PRIu64 " ns from now",
- alarm_offset * t16->period_ns);
+ trace_avr_timer16_next_alarm(alarm_offset * t16->period_ns);
}
static void avr_timer16_interrupt(void *opaque)
@@ -253,11 +252,11 @@ static void avr_timer16_interrupt(void *opaque)
return;
}
- DB_PRINT("interrupt, cnt = %d", CNT(t16));
+ trace_avr_timer16_interrupt_count(CNT(t16));
/* Counter overflow */
if (t16->next_interrupt == OVERFLOW) {
- DB_PRINT("0xffff overflow");
+ trace_avr_timer16_interrupt_overflow("counter 0xffff");
avr_timer16_clock_reset(t16);
if (t16->imsk & T16_INT_TOV) {
t16->ifr |= T16_INT_TOV;
@@ -266,12 +265,12 @@ static void avr_timer16_interrupt(void *opaque)
}
/* Check for ocra overflow in CTC mode */
if (mode == T16_MODE_CTC_OCRA && t16->next_interrupt == COMPA) {
- DB_PRINT("CTC OCRA overflow");
+ trace_avr_timer16_interrupt_overflow("CTC OCRA");
avr_timer16_clock_reset(t16);
}
/* Check for icr overflow in CTC mode */
if (mode == T16_MODE_CTC_ICR && t16->next_interrupt == CAPT) {
- DB_PRINT("CTC ICR overflow");
+ trace_avr_timer16_interrupt_overflow("CTC ICR");
avr_timer16_clock_reset(t16);
if (t16->imsk & T16_INT_IC) {
t16->ifr |= T16_INT_IC;
@@ -367,6 +366,8 @@ static uint64_t avr_timer16_read(void *opaque, hwaddr offset, unsigned size)
default:
break;
}
+ trace_avr_timer16_read(offset, retval);
+
return (uint64_t)retval;
}
@@ -378,7 +379,7 @@ static void avr_timer16_write(void *opaque, hwaddr offset,
uint8_t val8 = (uint8_t)val64;
uint8_t prev_clk_src = CLKSRC(t16);
- DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
+ trace_avr_timer16_write(offset, val8);
switch (offset) {
case T16_CRA:
@@ -475,6 +476,7 @@ static uint64_t avr_timer16_imsk_read(void *opaque,
{
assert(size == 1);
AVRTimer16State *t16 = opaque;
+ trace_avr_timer16_read_imsk(offset ? 0 : t16->imsk);
if (offset != 0) {
return 0;
}
@@ -486,6 +488,7 @@ static void avr_timer16_imsk_write(void *opaque, hwaddr offset,
{
assert(size == 1);
AVRTimer16State *t16 = opaque;
+ trace_avr_timer16_write_imsk(val64);
if (offset != 0) {
return;
}
@@ -498,6 +501,7 @@ static uint64_t avr_timer16_ifr_read(void *opaque,
{
assert(size == 1);
AVRTimer16State *t16 = opaque;
+ trace_avr_timer16_read_ifr(offset ? 0 : t16->ifr);
if (offset != 0) {
return 0;
}
@@ -509,6 +513,7 @@ static void avr_timer16_ifr_write(void *opaque, hwaddr offset,
{
assert(size == 1);
AVRTimer16State *t16 = opaque;
+ trace_avr_timer16_write_imsk(val64);
if (offset != 0) {
return;
}
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index 29fda7870e..5d9f4c93fb 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -74,3 +74,15 @@ nrf51_timer_write(uint64_t addr, uint32_t value, unsigned size) "write addr 0x%"
bcm2835_systmr_irq(bool enable) "timer irq state %u"
bcm2835_systmr_read(uint64_t offset, uint64_t data) "timer read: offset 0x%" PRIx64 " data 0x%" PRIx64
bcm2835_systmr_write(uint64_t offset, uint64_t data) "timer write: offset 0x%" PRIx64 " data 0x%" PRIx64
+
+# avr_timer16.c
+avr_timer16_read(uint8_t addr, uint8_t value) "timer16 read addr:%u value:%u"
+avr_timer16_read_ifr(uint8_t value) "timer16 read addr:ifr value:%u"
+avr_timer16_read_imsk(uint8_t value) "timer16 read addr:imsk value:%u"
+avr_timer16_write(uint8_t addr, uint8_t value) "timer16 write addr:%u value:%u"
+avr_timer16_write_ifr(uint8_t value) "timer16 write addr:ifr value:%u"
+avr_timer16_write_imsk(uint8_t value) "timer16 write addr:imsk value:%u"
+avr_timer16_interrupt_count(uint8_t cnt) "count: %u"
+avr_timer16_interrupt_overflow(const char *reason) "overflow: %s"
+avr_timer16_next_alarm(uint64_t delay_ns) "next alarm: %" PRIu64 " ns from now"
+avr_timer16_clksrc_update(uint64_t freq_hz, uint64_t period_ns, uint64_t delay_s) "timer frequency: %" PRIu64 " Hz, period: %" PRIu64 " ns (%" PRId64 " us)"
--
2.21.1
^ permalink raw reply related [flat|nested] 70+ messages in thread* Re: [PATCH 2/2] !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral"
2020-01-31 1:09 ` [PATCH 2/2] !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral" Philippe Mathieu-Daudé
@ 2020-01-31 11:31 ` Alex Bennée
0 siblings, 0 replies; 70+ messages in thread
From: Alex Bennée @ 2020-01-31 11:31 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Sarah Harris, qemu-devel, Aleksandar Markovic, Michael Rolnik,
Aleksandar Markovic, Aleksandar Markovic
Philippe Mathieu-Daudé <philmd@redhat.com> writes:
> Convert DB_PRINT() to trace events.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> hw/timer/avr_timer16.c | 25 +++++++++++++++----------
> hw/timer/trace-events | 12 ++++++++++++
> 2 files changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/hw/timer/avr_timer16.c b/hw/timer/avr_timer16.c
> index 4e16afc61c..073f36aa76 100644
> --- a/hw/timer/avr_timer16.c
> +++ b/hw/timer/avr_timer16.c
> @@ -36,6 +36,7 @@
> #include "qemu/log.h"
> #include "hw/irq.h"
> #include "hw/qdev-properties.h"
> +#include "trace.h"
>
> /* Register offsets */
> #define T16_CRA 0x0
> @@ -104,7 +105,6 @@
> /* Helper macros */
> #define VAL16(l, h) ((h << 8) | l)
> #define DB_PRINT(fmt, args...) /* Nothing */
> -/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
>
> static inline int64_t avr_timer16_ns_to_ticks(AVRTimer16State *t16, int64_t t)
> {
> @@ -168,8 +168,8 @@ static void avr_timer16_clksrc_update(AVRTimer16State *t16)
> if (divider) {
> t16->freq_hz = t16->cpu_freq_hz / divider;
> t16->period_ns = NANOSECONDS_PER_SECOND / t16->freq_hz;
> - DB_PRINT("Timer frequency %" PRIu64 " hz, period %" PRIu64 " ns (%f s)",
> - t16->freq_hz, t16->period_ns, 1 / (double)t16->freq_hz);
> + trace_avr_timer16_clksrc_update(t16->freq_hz, t16->period_ns,
> + (uint64_t)(1e6 /
> t16->freq_hz));
Is it worth including a computed value here?
> }
> }
>
> @@ -235,8 +235,7 @@ static void avr_timer16_set_alarm(AVRTimer16State *t16)
> t16->reset_time_ns + ((CNT(t16) + alarm_offset) * t16->period_ns);
> timer_mod(t16->timer, alarm_ns);
>
> - DB_PRINT("next alarm %" PRIu64 " ns from now",
> - alarm_offset * t16->period_ns);
> + trace_avr_timer16_next_alarm(alarm_offset * t16->period_ns);
> }
>
> static void avr_timer16_interrupt(void *opaque)
> @@ -253,11 +252,11 @@ static void avr_timer16_interrupt(void *opaque)
> return;
> }
>
> - DB_PRINT("interrupt, cnt = %d", CNT(t16));
> + trace_avr_timer16_interrupt_count(CNT(t16));
>
> /* Counter overflow */
> if (t16->next_interrupt == OVERFLOW) {
> - DB_PRINT("0xffff overflow");
> + trace_avr_timer16_interrupt_overflow("counter 0xffff");
> avr_timer16_clock_reset(t16);
> if (t16->imsk & T16_INT_TOV) {
> t16->ifr |= T16_INT_TOV;
> @@ -266,12 +265,12 @@ static void avr_timer16_interrupt(void *opaque)
> }
> /* Check for ocra overflow in CTC mode */
> if (mode == T16_MODE_CTC_OCRA && t16->next_interrupt == COMPA) {
> - DB_PRINT("CTC OCRA overflow");
> + trace_avr_timer16_interrupt_overflow("CTC OCRA");
> avr_timer16_clock_reset(t16);
> }
> /* Check for icr overflow in CTC mode */
> if (mode == T16_MODE_CTC_ICR && t16->next_interrupt == CAPT) {
> - DB_PRINT("CTC ICR overflow");
> + trace_avr_timer16_interrupt_overflow("CTC ICR");
Rather than spamming strings to the trace log I'd suggest expanding
trace_avr_timer16_interrupt_count to include the mode and next_interrupt
state as hex values.
> avr_timer16_clock_reset(t16);
> if (t16->imsk & T16_INT_IC) {
> t16->ifr |= T16_INT_IC;
> @@ -367,6 +366,8 @@ static uint64_t avr_timer16_read(void *opaque, hwaddr offset, unsigned size)
> default:
> break;
> }
> + trace_avr_timer16_read(offset, retval);
> +
> return (uint64_t)retval;
> }
>
> @@ -378,7 +379,7 @@ static void avr_timer16_write(void *opaque, hwaddr offset,
> uint8_t val8 = (uint8_t)val64;
> uint8_t prev_clk_src = CLKSRC(t16);
>
> - DB_PRINT("write %d to offset %d", val8, (uint8_t)offset);
> + trace_avr_timer16_write(offset, val8);
>
> switch (offset) {
> case T16_CRA:
> @@ -475,6 +476,7 @@ static uint64_t avr_timer16_imsk_read(void *opaque,
> {
> assert(size == 1);
> AVRTimer16State *t16 = opaque;
> + trace_avr_timer16_read_imsk(offset ? 0 : t16->imsk);
> if (offset != 0) {
> return 0;
> }
> @@ -486,6 +488,7 @@ static void avr_timer16_imsk_write(void *opaque, hwaddr offset,
> {
> assert(size == 1);
> AVRTimer16State *t16 = opaque;
> + trace_avr_timer16_write_imsk(val64);
> if (offset != 0) {
> return;
> }
> @@ -498,6 +501,7 @@ static uint64_t avr_timer16_ifr_read(void *opaque,
> {
> assert(size == 1);
> AVRTimer16State *t16 = opaque;
> + trace_avr_timer16_read_ifr(offset ? 0 : t16->ifr);
> if (offset != 0) {
> return 0;
> }
> @@ -509,6 +513,7 @@ static void avr_timer16_ifr_write(void *opaque, hwaddr offset,
> {
> assert(size == 1);
> AVRTimer16State *t16 = opaque;
> + trace_avr_timer16_write_imsk(val64);
> if (offset != 0) {
> return;
> }
> diff --git a/hw/timer/trace-events b/hw/timer/trace-events
> index 29fda7870e..5d9f4c93fb 100644
> --- a/hw/timer/trace-events
> +++ b/hw/timer/trace-events
> @@ -74,3 +74,15 @@ nrf51_timer_write(uint64_t addr, uint32_t value, unsigned size) "write addr 0x%"
> bcm2835_systmr_irq(bool enable) "timer irq state %u"
> bcm2835_systmr_read(uint64_t offset, uint64_t data) "timer read: offset 0x%" PRIx64 " data 0x%" PRIx64
> bcm2835_systmr_write(uint64_t offset, uint64_t data) "timer write: offset 0x%" PRIx64 " data 0x%" PRIx64
> +
> +# avr_timer16.c
> +avr_timer16_read(uint8_t addr, uint8_t value) "timer16 read addr:%u value:%u"
> +avr_timer16_read_ifr(uint8_t value) "timer16 read addr:ifr value:%u"
> +avr_timer16_read_imsk(uint8_t value) "timer16 read addr:imsk value:%u"
> +avr_timer16_write(uint8_t addr, uint8_t value) "timer16 write addr:%u value:%u"
> +avr_timer16_write_ifr(uint8_t value) "timer16 write addr:ifr value:%u"
> +avr_timer16_write_imsk(uint8_t value) "timer16 write addr:imsk value:%u"
> +avr_timer16_interrupt_count(uint8_t cnt) "count: %u"
> +avr_timer16_interrupt_overflow(const char *reason) "overflow: %s"
> +avr_timer16_next_alarm(uint64_t delay_ns) "next alarm: %" PRIu64 " ns from now"
> +avr_timer16_clksrc_update(uint64_t freq_hz, uint64_t period_ns, uint64_t delay_s) "timer frequency: %" PRIu64 " Hz, period: %" PRIu64 " ns (%" PRId64 " us)"
--
Alex Bennée
^ permalink raw reply [flat|nested] 70+ messages in thread
* Re: [PATCH 0/2] !fixup target/avr merger-rc4
2020-01-31 1:09 ` [PATCH 0/2] !fixup target/avr merger-rc4 Philippe Mathieu-Daudé
2020-01-31 1:09 ` [PATCH 1/2] !fixup "hw/misc: Add limited support for AVR power device" Philippe Mathieu-Daudé
2020-01-31 1:09 ` [PATCH 2/2] !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral" Philippe Mathieu-Daudé
@ 2020-01-31 1:12 ` Aleksandar Markovic
2 siblings, 0 replies; 70+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 1:12 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Sarah Harris, QEMU Developers, Aleksandar Markovic,
Michael Rolnik, Aleksandar Markovic, Alex Bennée
[-- Attachment #1: Type: text/plain, Size: 1016 bytes --]
On Fri, Jan 31, 2020 at 2:09 AM Philippe Mathieu-Daudé <philmd@redhat.com>
wrote:
>
> Aleksandar, I addressed Alex Bennée comment as fixup, so you
> can squash directly. See:
> https://www.mail-archive.com/qemu-devel@nongnu.org/msg673846.html
>
> - convert DB_PRINT() to trace-events
> - fix style/indentation
>
> Based-on: <1580428993-4767-1-git-send-email-aleksandar.markovic@rt-rk.com>
>
That is great!
I am going to squash it into corresponding patches, and mention that in
commit messages.
Then I guess some r-b (by Alex) can be added.
Cool!
> Philippe Mathieu-Daudé (2):
> !fixup "hw/misc: Add limited support for AVR power device"
> !fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral"
>
> hw/misc/avr_power.c | 17 +++++++++--------
> hw/timer/avr_timer16.c | 25 +++++++++++++++----------
> hw/misc/trace-events | 4 ++++
> hw/timer/trace-events | 12 ++++++++++++
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> --
> 2.21.1
>
[-- Attachment #2: Type: text/html, Size: 1512 bytes --]
^ permalink raw reply [flat|nested] 70+ messages in thread