* [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types
@ 2020-04-21 12:00 Loic Poulain
2020-04-21 12:00 ` [PATCH 2/2] arch: arm64: dts: msm8996: Add CCI node Loic Poulain
2020-05-11 23:54 ` [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Loic Poulain @ 2020-04-21 12:00 UTC (permalink / raw)
To: bjorn.andersson; +Cc: linux-arm-msm, agross, Loic Poulain
Each IRQ_TYPE_NONE interrupt causes a warning at boot.
Fix that by defining an appropriate type.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 951c53a..24a4625 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1001,16 +1001,16 @@
"csi_clk_mux",
"vfe0",
"vfe1";
- interrupts = <GIC_SPI 78 0>,
- <GIC_SPI 79 0>,
- <GIC_SPI 80 0>,
- <GIC_SPI 296 0>,
- <GIC_SPI 297 0>,
- <GIC_SPI 298 0>,
- <GIC_SPI 299 0>,
- <GIC_SPI 309 0>,
- <GIC_SPI 314 0>,
- <GIC_SPI 315 0>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "csiphy0",
"csiphy1",
"csiphy2",
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] arch: arm64: dts: msm8996: Add CCI node
2020-04-21 12:00 [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Loic Poulain
@ 2020-04-21 12:00 ` Loic Poulain
2020-05-11 23:54 ` [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Loic Poulain @ 2020-04-21 12:00 UTC (permalink / raw)
To: bjorn.andersson; +Cc: linux-arm-msm, agross, Loic Poulain
Add CCI controller node, which can be used to communicate with
camera sensors (I2C subset). MSM8996 CCI offers two masters,
i2c-bus@0 and i2c-bus@1.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 37 +++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 24a4625..5bd0d8a0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1105,6 +1105,43 @@
};
};
+ cci: cci@a0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&mmcc CAMSS_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+ assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <37500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
adreno_smmu: iommu@b40000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
reg = <0x00b40000 0x10000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types
2020-04-21 12:00 [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Loic Poulain
2020-04-21 12:00 ` [PATCH 2/2] arch: arm64: dts: msm8996: Add CCI node Loic Poulain
@ 2020-05-11 23:54 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-05-11 23:54 UTC (permalink / raw)
To: Loic Poulain; +Cc: linux-arm-msm, agross
On Tue 21 Apr 05:00 PDT 2020, Loic Poulain wrote:
> Each IRQ_TYPE_NONE interrupt causes a warning at boot.
> Fix that by defining an appropriate type.
>
Dropped "arch: " from $subject, added Fixes and applied both patches.
Thanks,
Bjorn
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 951c53a..24a4625 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1001,16 +1001,16 @@
> "csi_clk_mux",
> "vfe0",
> "vfe1";
> - interrupts = <GIC_SPI 78 0>,
> - <GIC_SPI 79 0>,
> - <GIC_SPI 80 0>,
> - <GIC_SPI 296 0>,
> - <GIC_SPI 297 0>,
> - <GIC_SPI 298 0>,
> - <GIC_SPI 299 0>,
> - <GIC_SPI 309 0>,
> - <GIC_SPI 314 0>,
> - <GIC_SPI 315 0>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "csiphy0",
> "csiphy1",
> "csiphy2",
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-11 23:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-21 12:00 [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Loic Poulain
2020-04-21 12:00 ` [PATCH 2/2] arch: arm64: dts: msm8996: Add CCI node Loic Poulain
2020-05-11 23:54 ` [PATCH 1/2] arch: arm64: dts: msm8996: Fix CSI IRQ types Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.