From: dillon.minfei@gmail.com To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, p.zabel@pengutronix.de, pierre-yves.mordret@st.com, philippe.schenker@toradex.com Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, dillon min <dillon.minfei@gmail.com> Subject: [PATCH v4 3/4] ARM: dts: stm32: enable stmpe811 on stm32429-disco board Date: Tue, 9 Jun 2020 21:26:42 +0800 [thread overview] Message-ID: <1591709203-12106-4-git-send-email-dillon.minfei@gmail.com> (raw) In-Reply-To: <1591709203-12106-1-git-send-email-dillon.minfei@gmail.com> From: dillon min <dillon.minfei@gmail.com> Enable the stmpe811 touch screen on stm32429-disco board. Signed-off-by: dillon min <dillon.minfei@gmail.com> --- arch/arm/boot/dts/stm32f429-disco.dts | 47 +++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 30c0f6717871..fad1ec10efb6 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -49,6 +49,8 @@ #include "stm32f429.dtsi" #include "stm32f429-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32F429i-DISCO board"; @@ -127,3 +129,48 @@ pinctrl-names = "default"; status = "okay"; }; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; + + stmpe811@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioa>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; + }; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, p.zabel@pengutronix.de, pierre-yves.mordret@st.com, philippe.schenker@toradex.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, dillon min <dillon.minfei@gmail.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 3/4] ARM: dts: stm32: enable stmpe811 on stm32429-disco board Date: Tue, 9 Jun 2020 21:26:42 +0800 [thread overview] Message-ID: <1591709203-12106-4-git-send-email-dillon.minfei@gmail.com> (raw) In-Reply-To: <1591709203-12106-1-git-send-email-dillon.minfei@gmail.com> From: dillon min <dillon.minfei@gmail.com> Enable the stmpe811 touch screen on stm32429-disco board. Signed-off-by: dillon min <dillon.minfei@gmail.com> --- arch/arm/boot/dts/stm32f429-disco.dts | 47 +++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 30c0f6717871..fad1ec10efb6 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -49,6 +49,8 @@ #include "stm32f429.dtsi" #include "stm32f429-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32F429i-DISCO board"; @@ -127,3 +129,48 @@ pinctrl-names = "default"; status = "okay"; }; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; + + stmpe811@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioa>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; + }; +}; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-06-09 13:27 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-09 13:26 [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board dillon.minfei 2020-06-09 13:26 ` dillon.minfei 2020-06-09 13:26 ` [PATCH v4 1/4] ARM: dts: stm32: add I2C3 support on STM32F429 SoC dillon.minfei 2020-06-09 13:26 ` dillon.minfei 2020-06-09 13:26 ` [PATCH v4 2/4] ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 dillon.minfei 2020-06-09 13:26 ` dillon.minfei 2020-06-09 13:26 ` dillon.minfei [this message] 2020-06-09 13:26 ` [PATCH v4 3/4] ARM: dts: stm32: enable stmpe811 on stm32429-disco board dillon.minfei 2020-06-09 13:26 ` [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue dillon.minfei 2020-06-09 13:26 ` dillon.minfei 2021-03-15 12:43 ` dillon min 2021-03-15 12:43 ` dillon min 2021-03-15 13:00 ` Wolfram Sang 2021-03-15 13:00 ` Wolfram Sang 2021-05-07 2:54 ` dillon min 2021-05-07 2:54 ` dillon min 2021-05-07 12:29 ` [Linux-stm32] " Patrice CHOTARD 2021-05-07 12:29 ` Patrice CHOTARD 2021-05-07 12:47 ` dillon min 2021-05-07 12:47 ` dillon min 2020-06-15 9:08 ` [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board Alexandre Torgue 2020-06-15 9:08 ` Alexandre Torgue 2020-06-15 10:06 ` dillon min 2020-06-15 10:06 ` dillon min
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1591709203-12106-4-git-send-email-dillon.minfei@gmail.com \ --to=dillon.minfei@gmail.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=p.zabel@pengutronix.de \ --cc=philippe.schenker@toradex.com \ --cc=pierre-yves.mordret@st.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.