[PATCH v4 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180

[PATCH v4 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180

[Taniya Das]

[v4]
 * Fix minor comments in the documentation binding.

[v3]
 * Update the clock-name to iface instead of gcc_lpass_sway.
 * Update the documentation with the reg descriptions and use maxItems.

[v2]
 * Update retention macro name.
 * Update the register description in the documentation.

[v1]
 * Add support for Retention of GDSCR.
 * Add YAML schema for LPASS clocks and clock IDs for LPASS.
 * Add clock driver for LPASS core clocks and GCC LPASS clock.

Taniya Das (4):
  clk: qcom: gdsc: Add support to enable retention of GSDCR
  dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
  clk: qcom: gcc: Add support for GCC LPASS clock for SC7180
  clk: qcom: lpass: Add support for LPASS clock controller for SC7180

 .../bindings/clock/qcom,sc7180-lpasscorecc.yaml    | 103 +++++
 drivers/clk/qcom/Kconfig                           |   9 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/gcc-sc7180.c                      |  14 +
 drivers/clk/qcom/gdsc.c                            |  12 +
 drivers/clk/qcom/gdsc.h                            |   1 +
 drivers/clk/qcom/lpasscorecc-sc7180.c              | 478 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sc7180.h        |   1 +
 .../dt-bindings/clock/qcom,lpasscorecc-sc7180.h    |  29 ++
 9 files changed, 648 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
 create mode 100644 drivers/clk/qcom/lpasscorecc-sc7180.c
 create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v4 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR

[Taniya Das]

Add support for the RETAIN_FF_ENABLE feature which enables the
usage of retention registers. These registers maintain their
state after disabling and re-enabling a GDSC.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gdsc.c | 12 ++++++++++++
 drivers/clk/qcom/gdsc.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 04944f1..2502430 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -29,6 +29,7 @@
 /* CFG_GDSCR */
 #define GDSC_POWER_UP_COMPLETE		BIT(16)
 #define GDSC_POWER_DOWN_COMPLETE	BIT(15)
+#define GDSC_RETAIN_FF_ENABLE		BIT(11)
 #define CFG_GDSCR_OFFSET		0x4
 
 /* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
@@ -216,6 +217,14 @@ static inline void gdsc_assert_reset_aon(struct gdsc *sc)
 	regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
 			   GMEM_RESET_MASK, 0);
 }
+
+static void gdsc_retain_ff_on(struct gdsc *sc)
+{
+	u32 mask = GDSC_RETAIN_FF_ENABLE;
+
+	regmap_update_bits(sc->regmap, sc->gdscr, mask, mask);
+}
+
 static int gdsc_enable(struct generic_pm_domain *domain)
 {
 	struct gdsc *sc = domain_to_gdsc(domain);
@@ -268,6 +277,9 @@ static int gdsc_enable(struct generic_pm_domain *domain)
 		udelay(1);
 	}
 
+	if (sc->flags & RETAIN_FF_ENABLE)
+		gdsc_retain_ff_on(sc);
+
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index c36fc26..a5076fe 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -50,6 +50,7 @@ struct gdsc {
 #define AON_RESET	BIT(4)
 #define POLL_CFG_GDSCR	BIT(5)
 #define ALWAYS_ON	BIT(6)
+#define RETAIN_FF_ENABLE	BIT(7)
 	struct reset_controller_dev	*rcdev;
 	unsigned int			*resets;
 	unsigned int			reset_count;
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

[Taniya Das]

The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Also add clock ids for GCC
LPASS and LPASS Core clock IDs for LPASS client to request for the clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 .../bindings/clock/qcom,sc7180-lpasscorecc.yaml    | 103 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sc7180.h        |   1 +
 .../dt-bindings/clock/qcom,lpasscorecc-sc7180.h    |  29 ++++++
 3 files changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
 create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
new file mode 100644
index 0000000..41d0a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core clock control module which supports the clocks and
+  power domains on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-lpasshm
+      - qcom,sc7180-lpasscorecc
+
+  clocks:
+    items:
+      - description: gcc_lpass_sway clock from GCC
+
+  clock-names:
+    items:
+      - const: iface
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: lpass core cc register
+      - description: lpass audio cc register
+
+  reg-names:
+    items:
+      - const: lpass_core_cc
+      - const: lpass_audio_cc
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,sc7180-lpasshm
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+else:
+  properties:
+    reg:
+      minItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@63000000 {
+      compatible = "qcom,sc7180-lpasshm";
+        reg = <0x63000000 0x28>;
+        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
+        clock-names = "iface";
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+
+  - |
+    clock-controller@62d00000 {
+        compatible = "qcom,sc7180-lpasscorecc";
+        reg = <0x62d00000 0x50000>,
+            <0x62780000 0x30000>;
+        reg-names = "lpass_core_cc", "lpass_audio_cc";
+        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
+        clock-names = "iface";
+        power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
index 992b67b..bdf43adc 100644
--- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
+++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
@@ -138,6 +138,7 @@
 #define GCC_MSS_Q6_MEMNOC_AXI_CLK				128
 #define GCC_MSS_SNOC_AXI_CLK					129
 #define GCC_SEC_CTRL_CLK_SRC					130
+#define GCC_LPASS_CFG_NOC_SWAY_CLK				131
 
 /* GCC resets */
 #define GCC_QUSB2PHY_PRIM_BCR					0
diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
new file mode 100644
index 0000000..a55d01d
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
+
+/* LPASS_CORE_CC clocks */
+#define LPASS_LPAAUDIO_DIG_PLL				0
+#define LPASS_LPAAUDIO_DIG_PLL_OUT_ODD			1
+#define CORE_CLK_SRC					2
+#define EXT_MCLK0_CLK_SRC				3
+#define LPAIF_PRI_CLK_SRC				4
+#define LPAIF_SEC_CLK_SRC				5
+#define LPASS_AUDIO_CORE_CORE_CLK			6
+#define LPASS_AUDIO_CORE_EXT_MCLK0_CLK			7
+#define LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK		8
+#define LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK		9
+#define LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK		10
+
+/* LPASS Core power domains */
+#define LPASS_CORE_HM_GDSCR				0
+
+/* LPASS Audio power domains */
+#define LPASS_AUDIO_HM_GDSCR				0
+#define LPASS_PDC_HM_GDSCR				1
+
+#endif
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Re: [PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

[Rob Herring]

On Wed, 15 Jul 2020 12:06:48 +0530, Taniya Das wrote:
> The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
> properties that are needed in a device tree. Also add clock ids for GCC
> LPASS and LPASS Core clock IDs for LPASS client to request for the clocks.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
>  .../bindings/clock/qcom,sc7180-lpasscorecc.yaml    | 103 +++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-sc7180.h        |   1 +
>  .../dt-bindings/clock/qcom,lpasscorecc-sc7180.h    |  29 ++++++
>  3 files changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

[Stephen Boyd]

Quoting Taniya Das (2020-07-14 23:36:48)
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
> new file mode 100644
> index 0000000..41d0a6d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm LPASS Core Clock Controller Binding for SC7180
> +
> +maintainers:
> +  - Taniya Das <tdas@codeaurora.org>
> +
> +description: |
> +  Qualcomm LPASS core clock control module which supports the clocks and
> +  power domains on SC7180.
> +
> +  See also:
> +  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7180-lpasshm
> +      - qcom,sc7180-lpasscorecc
> +
> +  clocks:
> +    items:
> +      - description: gcc_lpass_sway clock from GCC

Needs bi_tcxo description.

> +
> +  clock-names:
> +    items:
> +      - const: iface

Needs bi_tcxo

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: lpass core cc register
> +      - description: lpass audio cc register
> +
> +  reg-names:
> +    items:
> +      - const: lpass_core_cc
> +      - const: lpass_audio_cc
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: qcom,sc7180-lpasshm
> +then:
> +  properties:
> +    reg:
> +      maxItems: 1
> +
> +else:
> +  properties:
> +    reg:
> +      minItems: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +  - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> +    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
> +    clock-controller@63000000 {
> +      compatible = "qcom,sc7180-lpasshm";
> +        reg = <0x63000000 0x28>;
> +        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> +        clock-names = "iface";
> +        #clock-cells = <1>;
> +        #power-domain-cells = <1>;
> +    };
> +
> +  - |
> +    clock-controller@62d00000 {
> +        compatible = "qcom,sc7180-lpasscorecc";
> +        reg = <0x62d00000 0x50000>,
> +            <0x62780000 0x30000>;

Tabbing looks wrong. Just use spaces?

> +        reg-names = "lpass_core_cc", "lpass_audio_cc";
> +        clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> +        clock-names = "iface";
> +        power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> +        #clock-cells = <1>;
> +        #power-domain-cells = <1>;
> +    };
> +...
> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> index 992b67b..bdf43adc 100644
> --- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> @@ -138,6 +138,7 @@
>  #define GCC_MSS_Q6_MEMNOC_AXI_CLK                              128
>  #define GCC_MSS_SNOC_AXI_CLK                                   129
>  #define GCC_SEC_CTRL_CLK_SRC                                   130
> +#define GCC_LPASS_CFG_NOC_SWAY_CLK                             131
>  
>  /* GCC resets */
>  #define GCC_QUSB2PHY_PRIM_BCR                                  0

This hunk should be in the next patch. Oh but then that patch should come
before this one so the binding can use it. Either way, shouldn't be part
of this patch.

Re: [PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

[Taniya Das]

Hi Stephen,

Thanks for the review.

On 7/21/2020 1:21 PM, Stephen Boyd wrote:

>> +...
>> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> index 992b67b..bdf43adc 100644
>> --- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
>> @@ -138,6 +138,7 @@
>>   #define GCC_MSS_Q6_MEMNOC_AXI_CLK                              128
>>   #define GCC_MSS_SNOC_AXI_CLK                                   129
>>   #define GCC_SEC_CTRL_CLK_SRC                                   130
>> +#define GCC_LPASS_CFG_NOC_SWAY_CLK                             131
>>   
>>   /* GCC resets */
>>   #define GCC_QUSB2PHY_PRIM_BCR                                  0
> 
> This hunk should be in the next patch. Oh but then that patch should come
> before this one so the binding can use it. Either way, shouldn't be part
> of this patch.
> 


We had a problem with the bot complaining about the clock handles being 
used in the example.

https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1582540703-6328-4-git-send-email-tdas@codeaurora.org/

Thus I have kept the GCC bindings in the same patch.

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

Re: [PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180

[Stephen Boyd]

Quoting Taniya Das (2020-07-21 10:26:53)
> Hi Stephen,
> 
> Thanks for the review.
> 
> On 7/21/2020 1:21 PM, Stephen Boyd wrote:
> 
> >> +...
> >> diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> >> index 992b67b..bdf43adc 100644
> >> --- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
> >> +++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
> >> @@ -138,6 +138,7 @@
> >>   #define GCC_MSS_Q6_MEMNOC_AXI_CLK                              128
> >>   #define GCC_MSS_SNOC_AXI_CLK                                   129
> >>   #define GCC_SEC_CTRL_CLK_SRC                                   130
> >> +#define GCC_LPASS_CFG_NOC_SWAY_CLK                             131
> >>   
> >>   /* GCC resets */
> >>   #define GCC_QUSB2PHY_PRIM_BCR                                  0
> > 
> > This hunk should be in the next patch. Oh but then that patch should come
> > before this one so the binding can use it. Either way, shouldn't be part
> > of this patch.
> > 
> 
> 
> We had a problem with the bot complaining about the clock handles being 
> used in the example.
> 
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1582540703-6328-4-git-send-email-tdas@codeaurora.org/
> 
> Thus I have kept the GCC bindings in the same patch.
> 

Ah ok. Well I'll fix it when you resend to fix the comment on patch 4.

[PATCH v4 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180

[Taniya Das]

Add the GCC lpass clock which is required to access the LPASS core
clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index ca4383e..8d3b161 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -2251,6 +2251,19 @@ static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
 	},
 };
 
+static struct clk_branch gcc_lpass_cfg_noc_sway_clk = {
+	.halt_reg = 0x47018,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x47018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_lpass_cfg_noc_sway_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2428,6 +2441,7 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
 	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 	[GCC_SEC_CTRL_CLK_SRC] = &gcc_sec_ctrl_clk_src.clkr,
+	[GCC_LPASS_CFG_NOC_SWAY_CLK] = &gcc_lpass_cfg_noc_sway_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_sc7180_resets[] = {
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v4 4/4] clk: qcom: lpass: Add support for LPASS clock controller for SC7180

[Taniya Das]

The Low Power Audio subsystem clocks are required for Audio client
to be able to request for the clocks and power domains.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig              |   9 +
 drivers/clk/qcom/Makefile             |   1 +
 drivers/clk/qcom/lpasscorecc-sc7180.c | 478 ++++++++++++++++++++++++++++++++++
 3 files changed, 488 insertions(+)
 create mode 100644 drivers/clk/qcom/lpasscorecc-sc7180.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 318c0ad..0bb5261 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -308,6 +308,15 @@ config SC_GCC_7180
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  I2C, USB, UFS, SDCC, etc.
 
+config SC_LPASS_CORECC_7180
+	tristate "SC7180 LPASS Core Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the LPASS(Low Power Audio Subsystem) core clock controller
+	  on SC7180 devices.
+	  Say Y if you want to use LPASS clocks and power domains of the LPASS
+	  core clock controller.
+
 config SC_GPUCC_7180
 	tristate "SC7180 Graphics Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ae0979b..b5a706b 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
 obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c
new file mode 100644
index 0000000..fd8537c
--- /dev/null
+++ b/drivers/clk/qcom/lpasscorecc-sc7180.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD,
+	P_SLEEP_CLK,
+};
+
+static struct pll_vco fabia_vco[] = {
+	{ 249600000, 2000000000, 0 },
+};
+
+static const struct alpha_pll_config lpass_lpaaudio_dig_pll_config = {
+	.l = 0x20,
+	.alpha = 0x0,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002067,
+	.test_ctl_val = 0x40000000,
+	.test_ctl_hi_val = 0x00000000,
+	.user_ctl_val = 0x00005105,
+	.user_ctl_hi_val = 0x00004805,
+};
+
+static const u8 clk_alpha_pll_regs_offset[][PLL_OFF_MAX_REGS] = {
+	[CLK_ALPHA_PLL_TYPE_FABIA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_CAL_L_VAL] = 0x8,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_USER_CTL_U] = 0x10,
+		[PLL_OFF_USER_CTL_U1] = 0x14,
+		[PLL_OFF_CONFIG_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL_U] = 0x1C,
+		[PLL_OFF_CONFIG_CTL_U1] = 0x20,
+		[PLL_OFF_TEST_CTL] = 0x24,
+		[PLL_OFF_TEST_CTL_U] = 0x28,
+		[PLL_OFF_STATUS] = 0x30,
+		[PLL_OFF_OPMODE] = 0x38,
+		[PLL_OFF_FRAC] = 0x40,
+	},
+};
+
+static struct clk_alpha_pll lpass_lpaaudio_dig_pll = {
+	.offset = 0x1000,
+	.vco_table = fabia_vco,
+	.num_vco = ARRAY_SIZE(fabia_vco),
+	.regs = clk_alpha_pll_regs_offset[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_lpaaudio_dig_pll",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+				.name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fabia_ops,
+		},
+	},
+};
+
+static const struct clk_div_table
+			post_div_table_lpass_lpaaudio_dig_pll_out_odd[] = {
+	{ 0x5, 5 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv lpass_lpaaudio_dig_pll_out_odd = {
+	.offset = 0x1000,
+	.post_div_shift = 12,
+	.post_div_table = post_div_table_lpass_lpaaudio_dig_pll_out_odd,
+	.num_post_div =
+		ARRAY_SIZE(post_div_table_lpass_lpaaudio_dig_pll_out_odd),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "lpass_lpaaudio_dig_pll_out_odd",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &lpass_lpaaudio_dig_pll.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_alpha_pll_postdiv_fabia_ops,
+	},
+};
+
+static const struct parent_map lpass_core_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 5 },
+};
+
+static const struct clk_parent_data lpass_core_cc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+	{ .hw = &lpass_lpaaudio_dig_pll_out_odd.clkr.hw },
+};
+
+static const struct parent_map lpass_core_cc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static struct clk_rcg2 core_clk_src = {
+	.cmd_rcgr = 0x1d000,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = lpass_core_cc_parent_map_2,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "core_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.fw_name = "bi_tcxo",
+		},
+		.num_parents = 1,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_ext_mclk0_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static const struct freq_tbl ftbl_ext_lpaif_clk_src[] = {
+	F(256000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 1, 32),
+	F(512000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 1, 16),
+	F(768000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 10, 1, 16),
+	F(1024000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 1, 8),
+	F(1536000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 10, 1, 8),
+	F(2048000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 1, 4),
+	F(3072000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 10, 1, 4),
+	F(4096000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 1, 2),
+	F(6144000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 10, 1, 2),
+	F(8192000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 15, 0, 0),
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(12288000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 10, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(24576000, P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD, 5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 ext_mclk0_clk_src = {
+	.cmd_rcgr = 0x20000,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = lpass_core_cc_parent_map_0,
+	.freq_tbl = ftbl_ext_mclk0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "ext_mclk0_clk_src",
+		.parent_data = lpass_core_cc_parent_data_0,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 lpaif_pri_clk_src = {
+	.cmd_rcgr = 0x10000,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = lpass_core_cc_parent_map_0,
+	.freq_tbl = ftbl_ext_lpaif_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "lpaif_pri_clk_src",
+		.parent_data = lpass_core_cc_parent_data_0,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 lpaif_sec_clk_src = {
+	.cmd_rcgr = 0x11000,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = lpass_core_cc_parent_map_0,
+	.freq_tbl = ftbl_ext_lpaif_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "lpaif_sec_clk_src",
+		.parent_data = lpass_core_cc_parent_data_0,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch lpass_audio_core_ext_mclk0_clk = {
+	.halt_reg = 0x20014,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x20014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x20014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_audio_core_ext_mclk0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &ext_mclk0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_audio_core_lpaif_pri_ibit_clk = {
+	.halt_reg = 0x10018,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x10018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x10018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_audio_core_lpaif_pri_ibit_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &lpaif_pri_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_audio_core_lpaif_sec_ibit_clk = {
+	.halt_reg = 0x11018,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x11018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x11018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_audio_core_lpaif_sec_ibit_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &lpaif_sec_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_audio_core_sysnoc_mport_core_clk = {
+	.halt_reg = 0x23000,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x23000,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x23000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_audio_core_sysnoc_mport_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_regmap *lpass_core_cc_sc7180_clocks[] = {
+	[EXT_MCLK0_CLK_SRC] = &ext_mclk0_clk_src.clkr,
+	[LPAIF_PRI_CLK_SRC] = &lpaif_pri_clk_src.clkr,
+	[LPAIF_SEC_CLK_SRC] = &lpaif_sec_clk_src.clkr,
+	[CORE_CLK_SRC] = &core_clk_src.clkr,
+	[LPASS_AUDIO_CORE_EXT_MCLK0_CLK] = &lpass_audio_core_ext_mclk0_clk.clkr,
+	[LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK] =
+		&lpass_audio_core_lpaif_pri_ibit_clk.clkr,
+	[LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK] =
+		&lpass_audio_core_lpaif_sec_ibit_clk.clkr,
+	[LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK] =
+		&lpass_audio_core_sysnoc_mport_core_clk.clkr,
+	[LPASS_LPAAUDIO_DIG_PLL] = &lpass_lpaaudio_dig_pll.clkr,
+	[LPASS_LPAAUDIO_DIG_PLL_OUT_ODD] = &lpass_lpaaudio_dig_pll_out_odd.clkr,
+};
+
+static struct gdsc lpass_pdc_hm_gdsc = {
+	.gdscr = 0x3090,
+	.pd = {
+		.name = "lpass_pdc_hm_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc lpass_audio_hm_gdsc = {
+	.gdscr = 0x9090,
+	.pd = {
+		.name = "lpass_audio_hm_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc lpass_core_hm_gdsc = {
+	.gdscr = 0x0,
+	.pd = {
+		.name = "lpass_core_hm_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = RETAIN_FF_ENABLE,
+};
+
+static struct gdsc *lpass_core_hm_sc7180_gdscs[] = {
+	[LPASS_CORE_HM_GDSCR] = &lpass_core_hm_gdsc,
+};
+
+static struct gdsc *lpass_audio_hm_sc7180_gdscs[] = {
+	[LPASS_PDC_HM_GDSCR] = &lpass_pdc_hm_gdsc,
+	[LPASS_AUDIO_HM_GDSCR] = &lpass_audio_hm_gdsc,
+};
+
+static struct regmap_config lpass_core_cc_sc7180_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc lpass_core_hm_sc7180_desc = {
+	.config = &lpass_core_cc_sc7180_regmap_config,
+	.gdscs = lpass_core_hm_sc7180_gdscs,
+	.num_gdscs = ARRAY_SIZE(lpass_core_hm_sc7180_gdscs),
+};
+
+static const struct qcom_cc_desc lpass_core_cc_sc7180_desc = {
+	.config = &lpass_core_cc_sc7180_regmap_config,
+	.clks = lpass_core_cc_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(lpass_core_cc_sc7180_clocks),
+};
+
+static const struct qcom_cc_desc lpass_audio_hm_sc7180_desc = {
+	.config = &lpass_core_cc_sc7180_regmap_config,
+	.gdscs = lpass_audio_hm_sc7180_gdscs,
+	.num_gdscs = ARRAY_SIZE(lpass_audio_hm_sc7180_gdscs),
+};
+
+static int lpass_core_cc_sc7180_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc;
+	struct regmap *regmap;
+	int ret;
+
+	lpass_core_cc_sc7180_regmap_config.name = "lpass_audio_cc";
+	desc = &lpass_audio_hm_sc7180_desc;
+	ret = qcom_cc_probe_by_index(pdev, 1, desc);
+	if (ret)
+		return ret;
+
+	lpass_core_cc_sc7180_regmap_config.name = "lpass_core_cc";
+	regmap = qcom_cc_map(pdev, &lpass_core_cc_sc7180_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/*
+	 * Keep the CLK always-ON
+	 * LPASS_AUDIO_CORE_SYSNOC_SWAY_CORE_CLK
+	 */
+	regmap_update_bits(regmap, 0x24000, BIT(0), BIT(0));
+
+	/* PLL settings */
+	regmap_write(regmap, 0x1008, 0x20);
+	regmap_update_bits(regmap, 0x1014, BIT(0), BIT(0));
+
+	clk_fabia_pll_configure(&lpass_lpaaudio_dig_pll, regmap,
+				&lpass_lpaaudio_dig_pll_config);
+
+	return qcom_cc_really_probe(pdev, &lpass_core_cc_sc7180_desc, regmap);
+}
+
+static int lpass_hm_core_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc;
+	int ret;
+
+	lpass_core_cc_sc7180_regmap_config.name = "lpass_hm_core";
+	desc = &lpass_core_hm_sc7180_desc;
+
+	return qcom_cc_probe_by_index(pdev, 0, desc);
+}
+
+static const struct of_device_id lpass_core_cc_sc7180_match_table[] = {
+	{
+		.compatible = "qcom,sc7180-lpasshm",
+		.data = lpass_hm_core_probe,
+	},
+	{
+		.compatible = "qcom,sc7180-lpasscorecc",
+		.data = lpass_core_cc_sc7180_probe,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpass_core_cc_sc7180_match_table);
+
+static int lpass_core_sc7180_probe(struct platform_device *pdev)
+{
+	int (*clk_probe)(struct platform_device *p);
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_add(&pdev->dev, "iface");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto disable_pm_runtime;
+	}
+
+	clk_probe = of_device_get_match_data(&pdev->dev);
+	if (!clk_probe)
+		return -EINVAL;
+
+	ret = clk_probe(pdev);
+	if (ret)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops lpass_core_cc_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static struct platform_driver lpass_core_cc_sc7180_driver = {
+	.probe = lpass_core_sc7180_probe,
+	.driver = {
+		.name = "lpass_core_cc-sc7180",
+		.of_match_table = lpass_core_cc_sc7180_match_table,
+		.pm = &lpass_core_cc_pm_ops,
+	},
+};
+
+static int __init lpass_core_cc_sc7180_init(void)
+{
+	return platform_driver_register(&lpass_core_cc_sc7180_driver);
+}
+subsys_initcall(lpass_core_cc_sc7180_init);
+
+static void __exit lpass_core_cc_sc7180_exit(void)
+{
+	platform_driver_unregister(&lpass_core_cc_sc7180_driver);
+}
+module_exit(lpass_core_cc_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI LPASS_CORE_CC SC7180 Driver");
+MODULE_LICENSE("GPL v2");
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Re: [PATCH v4 4/4] clk: qcom: lpass: Add support for LPASS clock controller for SC7180

[Stephen Boyd]

Quoting Taniya Das (2020-07-14 23:36:50)
> diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c
> new file mode 100644
> index 0000000..fd8537c
> --- /dev/null
> +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c
> @@ -0,0 +1,478 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_clock.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "common.h"
> +#include "gdsc.h"
> +
> +enum {
> +       P_BI_TCXO,
> +       P_LPASS_LPAAUDIO_DIG_PLL_OUT_ODD,
> +       P_SLEEP_CLK,
> +};
> +
> +static struct pll_vco fabia_vco[] = {
> +       { 249600000, 2000000000, 0 },
> +};
> +
> +static const struct alpha_pll_config lpass_lpaaudio_dig_pll_config = {
> +       .l = 0x20,
> +       .alpha = 0x0,
> +       .config_ctl_val = 0x20485699,
> +       .config_ctl_hi_val = 0x00002067,
> +       .test_ctl_val = 0x40000000,
> +       .test_ctl_hi_val = 0x00000000,
> +       .user_ctl_val = 0x00005105,
> +       .user_ctl_hi_val = 0x00004805,
> +};
> +
> +static const u8 clk_alpha_pll_regs_offset[][PLL_OFF_MAX_REGS] = {
> +       [CLK_ALPHA_PLL_TYPE_FABIA] =  {
> +               [PLL_OFF_L_VAL] = 0x04,
> +               [PLL_OFF_CAL_L_VAL] = 0x8,
> +               [PLL_OFF_USER_CTL] = 0x0c,
> +               [PLL_OFF_USER_CTL_U] = 0x10,
> +               [PLL_OFF_USER_CTL_U1] = 0x14,
> +               [PLL_OFF_CONFIG_CTL] = 0x18,
> +               [PLL_OFF_CONFIG_CTL_U] = 0x1C,
> +               [PLL_OFF_CONFIG_CTL_U1] = 0x20,
> +               [PLL_OFF_TEST_CTL] = 0x24,
> +               [PLL_OFF_TEST_CTL_U] = 0x28,
> +               [PLL_OFF_STATUS] = 0x30,
> +               [PLL_OFF_OPMODE] = 0x38,
> +               [PLL_OFF_FRAC] = 0x40,
> +       },
> +};
> +
> +static struct clk_alpha_pll lpass_lpaaudio_dig_pll = {
> +       .offset = 0x1000,
> +       .vco_table = fabia_vco,
> +       .num_vco = ARRAY_SIZE(fabia_vco),
> +       .regs = clk_alpha_pll_regs_offset[CLK_ALPHA_PLL_TYPE_FABIA],
> +       .clkr = {
> +               .hw.init = &(struct clk_init_data){
> +                       .name = "lpass_lpaaudio_dig_pll",
> +                       .parent_data = &(const struct clk_parent_data){
> +                               .fw_name = "bi_tcxo",
> +                               .name = "bi_tcxo",

We don't need .name if we have .fw_name and this is a new binding/device.

> +                       },
> +                       .num_parents = 1,
> +                       .ops = &clk_alpha_pll_fabia_ops,
> +               },
> +       },
> +};
> +

Re: [PATCH v4 4/4] clk: qcom: lpass: Add support for LPASS clock controller for SC7180

[Taniya Das]

Hi Stephen,

Thanks for the review.

On 7/21/2020 1:18 PM, Stephen Boyd wrote:
> Quoting Taniya Das (2020-07-14 23:36:50)
>> diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c

>> +static struct clk_alpha_pll lpass_lpaaudio_dig_pll = {
>> +       .offset = 0x1000,
>> +       .vco_table = fabia_vco,
>> +       .num_vco = ARRAY_SIZE(fabia_vco),
>> +       .regs = clk_alpha_pll_regs_offset[CLK_ALPHA_PLL_TYPE_FABIA],
>> +       .clkr = {
>> +               .hw.init = &(struct clk_init_data){
>> +                       .name = "lpass_lpaaudio_dig_pll",
>> +                       .parent_data = &(const struct clk_parent_data){
>> +                               .fw_name = "bi_tcxo",
>> +                               .name = "bi_tcxo",
> 
> We don't need .name if we have .fw_name and this is a new binding/device.
> 

My bad, will cleanup in the next patch.

>> +                       },
>> +                       .num_parents = 1,
>> +                       .ops = &clk_alpha_pll_fabia_ops,
>> +               },
>> +       },
>> +};
>> +

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--