* [PATCH net 1/8] bnxt_en: Don't query FW when netif_running() is false.
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 2/8] bnxt_en: Check for zero dir entries in NVRAM Michael Chan
` (6 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, Pavan Chebbi
From: Pavan Chebbi <pavan.chebbi@broadcom.com>
In rare conditions like two stage OS installation, the
ethtool's get_channels function may be called when the
device is in D3 state, leading to uncorrectable PCI error.
Check netif_running() first before making any query to FW
which involves writing to BAR.
Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 64da654..3890c1a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -806,7 +806,7 @@ static void bnxt_get_channels(struct net_device *dev,
int max_tx_sch_inputs;
/* Get the most up-to-date max_tx_sch_inputs. */
- if (BNXT_NEW_RM(bp))
+ if (netif_running(dev) && BNXT_NEW_RM(bp))
bnxt_hwrm_func_resc_qcaps(bp, false);
max_tx_sch_inputs = hw_resc->max_tx_sch_inputs;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 2/8] bnxt_en: Check for zero dir entries in NVRAM.
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
2020-08-26 5:08 ` [PATCH net 1/8] bnxt_en: Don't query FW when netif_running() is false Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 3/8] bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled Michael Chan
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, Vasundhara Volam
From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware
command may return zero dir entries. Return error in such case to
avoid zero length dma buffer request.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 3890c1a..5d1a0cd 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2323,6 +2323,9 @@ static int bnxt_get_nvram_directory(struct net_device *dev, u32 len, u8 *data)
if (rc != 0)
return rc;
+ if (!dir_entries || !entry_length)
+ return -EIO;
+
/* Insert 2 bytes of directory info (count and size of entries) */
if (len < 2)
return -EINVAL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 3/8] bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
2020-08-26 5:08 ` [PATCH net 1/8] bnxt_en: Don't query FW when netif_running() is false Michael Chan
2020-08-26 5:08 ` [PATCH net 2/8] bnxt_en: Check for zero dir entries in NVRAM Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 4/8] bnxt_en: Fix PCI AER error recovery flow Michael Chan
` (4 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba
We are returning the wrong count for ETH_SS_STATS in get_sset_count()
when XDP or TCs are enabled. In a recent commit, we got rid of
irrelevant counters when the ring is RX only or TX only, but we
did not make the proper adjustments for the count. As a result,
when we have XDP or TCs enabled, we are returning an excess count
because some of the rings are TX only. This causes ethtool -S to
display extra counters with no counter names.
Fix bnxt_get_num_ring_stats() by not assuming that all rings will
always have RX and TX counters in combined mode.
Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 5d1a0cd..1bc5130 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -472,20 +472,13 @@ static int bnxt_get_num_tpa_ring_stats(struct bnxt *bp)
static int bnxt_get_num_ring_stats(struct bnxt *bp)
{
int rx, tx, cmn;
- bool sh = false;
-
- if (bp->flags & BNXT_FLAG_SHARED_RINGS)
- sh = true;
rx = NUM_RING_RX_HW_STATS + NUM_RING_RX_SW_STATS +
bnxt_get_num_tpa_ring_stats(bp);
tx = NUM_RING_TX_HW_STATS;
cmn = NUM_RING_CMN_SW_STATS;
- if (sh)
- return (rx + tx + cmn) * bp->cp_nr_rings;
- else
- return rx * bp->rx_nr_rings + tx * bp->tx_nr_rings +
- cmn * bp->cp_nr_rings;
+ return rx * bp->rx_nr_rings + tx * bp->tx_nr_rings +
+ cmn * bp->cp_nr_rings;
}
static int bnxt_get_num_stats(struct bnxt *bp)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 4/8] bnxt_en: Fix PCI AER error recovery flow
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
` (2 preceding siblings ...)
2020-08-26 5:08 ` [PATCH net 3/8] bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 5/8] bnxt_en: Fix possible crash in bnxt_fw_reset_task() Michael Chan
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, Vasundhara Volam
From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
When a PCI error is detected the PCI state could be corrupt, save
the PCI state after initialization and restore it after the slot
reset.
Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 31fb5a2..4389a74 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -12339,6 +12339,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
(long)pci_resource_start(pdev, 0), dev->dev_addr);
pcie_print_link_status(pdev);
+ pci_save_state(pdev);
return 0;
init_err_cleanup:
@@ -12536,6 +12537,8 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
"Cannot re-enable PCI device after reset.\n");
} else {
pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
err = bnxt_hwrm_func_reset(bp);
if (!err) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 5/8] bnxt_en: Fix possible crash in bnxt_fw_reset_task().
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
` (3 preceding siblings ...)
2020-08-26 5:08 ` [PATCH net 4/8] bnxt_en: Fix PCI AER error recovery flow Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 6/8] bnxt_en: fix HWRM error when querying VF temperature Michael Chan
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba
bnxt_fw_reset_task() is run from a delayed workqueue. The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.
The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling. This
will guarantee that no rescheduling will be done after it is cancelled.
Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4389a74..d6f3592 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1141,6 +1141,9 @@ static int bnxt_discard_rx(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
static void bnxt_queue_fw_reset_work(struct bnxt *bp, unsigned long delay)
{
+ if (!(test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)))
+ return;
+
if (BNXT_PF(bp))
queue_delayed_work(bnxt_pf_wq, &bp->fw_reset_task, delay);
else
@@ -1157,10 +1160,12 @@ static void bnxt_queue_sp_work(struct bnxt *bp)
static void bnxt_cancel_sp_work(struct bnxt *bp)
{
- if (BNXT_PF(bp))
+ if (BNXT_PF(bp)) {
flush_workqueue(bnxt_pf_wq);
- else
+ } else {
cancel_work_sync(&bp->sp_task);
+ cancel_delayed_work_sync(&bp->fw_reset_task);
+ }
}
static void bnxt_sched_reset(struct bnxt *bp, struct bnxt_rx_ring_info *rxr)
@@ -11761,6 +11766,7 @@ static void bnxt_remove_one(struct pci_dev *pdev)
unregister_netdev(dev);
bnxt_dl_unregister(bp);
bnxt_shutdown_tc(bp);
+ clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state);
bnxt_cancel_sp_work(bp);
bp->sp_event = 0;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 6/8] bnxt_en: fix HWRM error when querying VF temperature
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
` (4 preceding siblings ...)
2020-08-26 5:08 ` [PATCH net 5/8] bnxt_en: Fix possible crash in bnxt_fw_reset_task() Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 7/8] bnxt_en: init RSS table for Minimal-Static VF reservation Michael Chan
2020-08-26 5:08 ` [PATCH net 8/8] bnxt_en: Setup default RSS map in all scenarios Michael Chan
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, Edwin Peer, Marc Smith
From: Edwin Peer <edwin.peer@broadcom.com>
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.
The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.
Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature")
Cc: Marc Smith <msmith626@gmail.com>
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index d6f3592..a23ccb0 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9289,16 +9289,19 @@ static ssize_t bnxt_show_temp(struct device *dev,
struct hwrm_temp_monitor_query_input req = {0};
struct hwrm_temp_monitor_query_output *resp;
struct bnxt *bp = dev_get_drvdata(dev);
- u32 temp = 0;
+ u32 len = 0;
resp = bp->hwrm_cmd_resp_addr;
bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_TEMP_MONITOR_QUERY, -1, -1);
mutex_lock(&bp->hwrm_cmd_lock);
- if (!_hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT))
- temp = resp->temp * 1000; /* display millidegree */
+ if (!_hwrm_send_message_silent(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT))
+ len = sprintf(buf, "%u\n", resp->temp * 1000); /* display millidegree */
mutex_unlock(&bp->hwrm_cmd_lock);
- return sprintf(buf, "%u\n", temp);
+ if (len)
+ return len;
+
+ return sprintf(buf, "unknown\n");
}
static SENSOR_DEVICE_ATTR(temp1_input, 0444, bnxt_show_temp, NULL, 0);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 7/8] bnxt_en: init RSS table for Minimal-Static VF reservation
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
` (5 preceding siblings ...)
2020-08-26 5:08 ` [PATCH net 6/8] bnxt_en: fix HWRM error when querying VF temperature Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
2020-08-26 5:08 ` [PATCH net 8/8] bnxt_en: Setup default RSS map in all scenarios Michael Chan
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, Edwin Peer
From: Edwin Peer <edwin.peer@broadcom.com>
There are no VF rings available during probe when the device is configured
using the Minimal-Static reservation strategy. In this case, the RSS
indirection table can only be initialized later, during bnxt_open_nic().
However, this was not happening because the rings will already have been
reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings()
to return false in bnxt_reserve_rings() and bypass the RSS table init.
Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into
__bnxt_reserve_rings(), which is common to both paths and is called
whenever ring configuration is changed. After doing this, the RSS table
init that must be called from bnxt_init_one() happens implicitly via
bnxt_set_default_rings(), necessitating doing the allocation earlier in
order to avoid a null pointer dereference.
Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index a23ccb0..27df572 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6219,6 +6219,9 @@ static int __bnxt_reserve_rings(struct bnxt *bp)
if (!tx || !rx || !cp || !grp || !vnic || !stat)
return -ENOMEM;
+ if (!netif_is_rxfh_configured(bp->dev))
+ bnxt_set_dflt_rss_indir_tbl(bp);
+
return rc;
}
@@ -8500,9 +8503,6 @@ int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init)
rc = bnxt_init_int_mode(bp);
bnxt_ulp_irq_restart(bp, rc);
}
- if (!netif_is_rxfh_configured(bp->dev))
- bnxt_set_dflt_rss_indir_tbl(bp);
-
if (rc) {
netdev_err(bp->dev, "ring reservation/IRQ init failure rc: %d\n", rc);
return rc;
@@ -12209,6 +12209,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (BNXT_CHIP_P5(bp))
bp->flags |= BNXT_FLAG_CHIP_P5;
+ rc = bnxt_alloc_rss_indir_tbl(bp);
+ if (rc)
+ goto init_err_pci_clean;
+
rc = bnxt_fw_init_one_p2(bp);
if (rc)
goto init_err_pci_clean;
@@ -12313,11 +12317,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
- rc = bnxt_alloc_rss_indir_tbl(bp);
- if (rc)
- goto init_err_pci_clean;
- bnxt_set_dflt_rss_indir_tbl(bp);
-
if (BNXT_PF(bp)) {
if (!bnxt_pf_wq) {
bnxt_pf_wq =
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net 8/8] bnxt_en: Setup default RSS map in all scenarios.
2020-08-26 5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
` (6 preceding siblings ...)
2020-08-26 5:08 ` [PATCH net 7/8] bnxt_en: init RSS table for Minimal-Static VF reservation Michael Chan
@ 2020-08-26 5:08 ` Michael Chan
7 siblings, 0 replies; 11+ messages in thread
From: Michael Chan @ 2020-08-26 5:08 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba
The recent changes to support user-defined RSS map assume that RX
rings are always reserved and the default RSS map is set after the
RX rings are successfully reserved. If the firmware spec is older
than 1.6.1, no ring reservations are required and the default RSS
map is not setup at all. In another scenario where the fw Resource
Manager is older, RX rings are not reserved and we also end up with
no valid RSS map.
Fix both issues in bnxt_need_reserve_rings(). In both scenarios
described above, we don't need to reserve RX rings so we need to
call this new function bnxt_check_rss_map_no_rmgr() to setup the
default RSS map when needed.
Without valid RSS map, the NIC won't receive packets properly.
Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 39 ++++++++++++++++++++++++-------
1 file changed, 30 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 27df572..3162271 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6107,6 +6107,21 @@ static int bnxt_get_func_stat_ctxs(struct bnxt *bp)
return cp + ulp_stat;
}
+/* Check if a default RSS map needs to be setup. This function is only
+ * used on older firmware that does not require reserving RX rings.
+ */
+static void bnxt_check_rss_tbl_no_rmgr(struct bnxt *bp)
+{
+ struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+
+ /* The RSS map is valid for RX rings set to resv_rx_rings */
+ if (hw_resc->resv_rx_rings != bp->rx_nr_rings) {
+ hw_resc->resv_rx_rings = bp->rx_nr_rings;
+ if (!netif_is_rxfh_configured(bp->dev))
+ bnxt_set_dflt_rss_indir_tbl(bp);
+ }
+}
+
static bool bnxt_need_reserve_rings(struct bnxt *bp)
{
struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
@@ -6115,22 +6130,28 @@ static bool bnxt_need_reserve_rings(struct bnxt *bp)
int rx = bp->rx_nr_rings, stat;
int vnic = 1, grp = rx;
- if (bp->hwrm_spec_code < 0x10601)
- return false;
-
- if (hw_resc->resv_tx_rings != bp->tx_nr_rings)
+ if (hw_resc->resv_tx_rings != bp->tx_nr_rings &&
+ bp->hwrm_spec_code >= 0x10601)
return true;
+ /* Old firmware does not need RX ring reservations but we still
+ * need to setup a default RSS map when needed. With new firmware
+ * we go through RX ring reservations first and then set up the
+ * RSS map for the successfully reserved RX rings when needed.
+ */
+ if (!BNXT_NEW_RM(bp)) {
+ bnxt_check_rss_tbl_no_rmgr(bp);
+ return false;
+ }
if ((bp->flags & BNXT_FLAG_RFS) && !(bp->flags & BNXT_FLAG_CHIP_P5))
vnic = rx + 1;
if (bp->flags & BNXT_FLAG_AGG_RINGS)
rx <<= 1;
stat = bnxt_get_func_stat_ctxs(bp);
- if (BNXT_NEW_RM(bp) &&
- (hw_resc->resv_rx_rings != rx || hw_resc->resv_cp_rings != cp ||
- hw_resc->resv_vnics != vnic || hw_resc->resv_stat_ctxs != stat ||
- (hw_resc->resv_hw_ring_grps != grp &&
- !(bp->flags & BNXT_FLAG_CHIP_P5))))
+ if (hw_resc->resv_rx_rings != rx || hw_resc->resv_cp_rings != cp ||
+ hw_resc->resv_vnics != vnic || hw_resc->resv_stat_ctxs != stat ||
+ (hw_resc->resv_hw_ring_grps != grp &&
+ !(bp->flags & BNXT_FLAG_CHIP_P5)))
return true;
if ((bp->flags & BNXT_FLAG_CHIP_P5) && BNXT_PF(bp) &&
hw_resc->resv_irqs != nq)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread