[PATCH v2 04/16] hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board

[Bin Meng <bmeng.cn@gmail.com>]

From: Bin Meng <bin.meng@windriver.com>

This is an initial support for Microchip PolarFire SoC Icicle Kit.
The Icicle Kit board integrates a PolarFire SoC, with one SiFive's
E51 plus four U54 cores and many on-chip peripherals and an FPGA.

For more details about Microchip PolarFire Soc, please see:
https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga

Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000.
The following perepherals are created as an unimplemented device:

- Bus Error Uint 0/1/2/3/4
- L2 cache controller
- SYSREG
- MPUCFG
- IOSCBCFG

More devices will be added later.

The BIOS image used by this machine is hss.bin, aka Hart Software
Services, which can be built from:
https://github.com/polarfire-soc/hart-software-services

To launch this machine:
$ qemu-system-riscv64 -nographic -M microchip-icicle-kit

The memory is set to 1 GiB by default to match the hardware.
A sanity check on ram size is performed in the machine init routine
to prompt user to increase the RAM size to > 1 GiB when less than
1 GiB ram is detected.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v1)

 default-configs/riscv64-softmmu.mak |   1 +
 include/hw/riscv/microchip_pfsoc.h  |  88 ++++++++++
 hw/riscv/microchip_pfsoc.c          | 312 ++++++++++++++++++++++++++++++++++++
 MAINTAINERS                         |   7 +
 hw/riscv/Kconfig                    |   6 +
 hw/riscv/meson.build                |   1 +
 6 files changed, 415 insertions(+)
 create mode 100644 include/hw/riscv/microchip_pfsoc.h
 create mode 100644 hw/riscv/microchip_pfsoc.c

diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
index aaf6d73..76b6195 100644
--- a/default-configs/riscv64-softmmu.mak
+++ b/default-configs/riscv64-softmmu.mak
@@ -10,3 +10,4 @@ CONFIG_SPIKE=y
 CONFIG_SIFIVE_E=y
 CONFIG_SIFIVE_U=y
 CONFIG_RISCV_VIRT=y
+CONFIG_MICROCHIP_PFSOC=y
diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h
new file mode 100644
index 0000000..1953ef1
--- /dev/null
+++ b/include/hw/riscv/microchip_pfsoc.h
@@ -0,0 +1,88 @@
+/*
+ * Microchip PolarFire SoC machine interface
+ *
+ * Copyright (c) 2020 Wind River Systems, Inc.
+ *
+ * Author:
+ *   Bin Meng <bin.meng@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_MICROCHIP_PFSOC_H
+#define HW_MICROCHIP_PFSOC_H
+
+typedef struct MicrochipPFSoCState {
+    /*< private >*/
+    DeviceState parent_obj;
+
+    /*< public >*/
+    CPUClusterState e_cluster;
+    CPUClusterState u_cluster;
+    RISCVHartArrayState e_cpus;
+    RISCVHartArrayState u_cpus;
+    DeviceState *plic;
+} MicrochipPFSoCState;
+
+#define TYPE_MICROCHIP_PFSOC    "microchip.pfsoc"
+#define MICROCHIP_PFSOC(obj) \
+    OBJECT_CHECK(MicrochipPFSoCState, (obj), TYPE_MICROCHIP_PFSOC)
+
+typedef struct MicrochipIcicleKitState {
+    /*< private >*/
+    MachineState parent_obj;
+
+    /*< public >*/
+    MicrochipPFSoCState soc;
+} MicrochipIcicleKitState;
+
+#define TYPE_MICROCHIP_ICICLE_KIT_MACHINE \
+    MACHINE_TYPE_NAME("microchip-icicle-kit")
+#define MICROCHIP_ICICLE_KIT_MACHINE(obj) \
+    OBJECT_CHECK(MicrochipIcicleKitState, (obj), \
+                 TYPE_MICROCHIP_ICICLE_KIT_MACHINE)
+
+enum {
+    MICROCHIP_PFSOC_DEBUG,
+    MICROCHIP_PFSOC_E51_DTIM,
+    MICROCHIP_PFSOC_BUSERR_UNIT0,
+    MICROCHIP_PFSOC_BUSERR_UNIT1,
+    MICROCHIP_PFSOC_BUSERR_UNIT2,
+    MICROCHIP_PFSOC_BUSERR_UNIT3,
+    MICROCHIP_PFSOC_BUSERR_UNIT4,
+    MICROCHIP_PFSOC_CLINT,
+    MICROCHIP_PFSOC_L2CC,
+    MICROCHIP_PFSOC_L2LIM,
+    MICROCHIP_PFSOC_PLIC,
+    MICROCHIP_PFSOC_SYSREG,
+    MICROCHIP_PFSOC_MPUCFG,
+    MICROCHIP_PFSOC_ENVM_CFG,
+    MICROCHIP_PFSOC_ENVM_DATA,
+    MICROCHIP_PFSOC_IOSCB_CFG,
+    MICROCHIP_PFSOC_DRAM,
+};
+
+#define MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT    1
+#define MICROCHIP_PFSOC_COMPUTE_CPU_COUNT       4
+
+#define MICROCHIP_PFSOC_PLIC_HART_CONFIG        "MS"
+#define MICROCHIP_PFSOC_PLIC_NUM_SOURCES        185
+#define MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES     7
+#define MICROCHIP_PFSOC_PLIC_PRIORITY_BASE      0x04
+#define MICROCHIP_PFSOC_PLIC_PENDING_BASE       0x1000
+#define MICROCHIP_PFSOC_PLIC_ENABLE_BASE        0x2000
+#define MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE      0x80
+#define MICROCHIP_PFSOC_PLIC_CONTEXT_BASE       0x200000
+#define MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE     0x1000
+
+#endif /* HW_MICROCHIP_PFSOC_H */
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
new file mode 100644
index 0000000..d946b2a
--- /dev/null
+++ b/hw/riscv/microchip_pfsoc.c
@@ -0,0 +1,312 @@
+/*
+ * QEMU RISC-V Board Compatible with Microchip PolarFire SoC Icicle Kit
+ *
+ * Copyright (c) 2020 Wind River Systems, Inc.
+ *
+ * Author:
+ *   Bin Meng <bin.meng@windriver.com>
+ *
+ * Provides a board compatible with the Microchip PolarFire SoC Icicle Kit
+ *
+ * 0) CLINT (Core Level Interruptor)
+ * 1) PLIC (Platform Level Interrupt Controller)
+ * 2) eNVM (Embedded Non-Volatile Memory)
+ *
+ * This board currently generates devicetree dynamically that indicates at least
+ * two harts and up to five harts.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/units.h"
+#include "qemu/cutils.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "hw/irq.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "hw/cpu/cluster.h"
+#include "target/riscv/cpu.h"
+#include "hw/misc/unimp.h"
+#include "hw/riscv/boot.h"
+#include "hw/riscv/riscv_hart.h"
+#include "hw/riscv/sifive_clint.h"
+#include "hw/riscv/sifive_plic.h"
+#include "hw/riscv/microchip_pfsoc.h"
+
+/*
+ * The BIOS image used by this machine is called Hart Software Services (HSS).
+ * See https://github.com/polarfire-soc/hart-software-services
+ */
+#define BIOS_FILENAME   "hss.bin"
+#define RESET_VECTOR    0x20220000
+
+static const struct MemmapEntry {
+    hwaddr base;
+    hwaddr size;
+} microchip_pfsoc_memmap[] = {
+    [MICROCHIP_PFSOC_DEBUG] =           {        0x0,     0x1000 },
+    [MICROCHIP_PFSOC_E51_DTIM] =        {  0x1000000,     0x2000 },
+    [MICROCHIP_PFSOC_BUSERR_UNIT0] =    {  0x1700000,     0x1000 },
+    [MICROCHIP_PFSOC_BUSERR_UNIT1] =    {  0x1701000,     0x1000 },
+    [MICROCHIP_PFSOC_BUSERR_UNIT2] =    {  0x1702000,     0x1000 },
+    [MICROCHIP_PFSOC_BUSERR_UNIT3] =    {  0x1703000,     0x1000 },
+    [MICROCHIP_PFSOC_BUSERR_UNIT4] =    {  0x1704000,     0x1000 },
+    [MICROCHIP_PFSOC_CLINT] =           {  0x2000000,    0x10000 },
+    [MICROCHIP_PFSOC_L2CC] =            {  0x2010000,     0x1000 },
+    [MICROCHIP_PFSOC_L2LIM] =           {  0x8000000,  0x2000000 },
+    [MICROCHIP_PFSOC_PLIC] =            {  0xc000000,  0x4000000 },
+    [MICROCHIP_PFSOC_SYSREG] =          { 0x20002000,     0x2000 },
+    [MICROCHIP_PFSOC_MPUCFG] =          { 0x20005000,     0x1000 },
+    [MICROCHIP_PFSOC_ENVM_CFG] =        { 0x20200000,     0x1000 },
+    [MICROCHIP_PFSOC_ENVM_DATA] =       { 0x20220000,    0x20000 },
+    [MICROCHIP_PFSOC_IOSCB_CFG] =       { 0x37080000,     0x1000 },
+    [MICROCHIP_PFSOC_DRAM] =            { 0x80000000,        0x0 },
+};
+
+static void microchip_pfsoc_soc_instance_init(Object *obj)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    MicrochipPFSoCState *s = MICROCHIP_PFSOC(obj);
+
+    object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
+    qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
+
+    object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
+                            TYPE_RISCV_HART_ARRAY);
+    qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
+    qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
+    qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type",
+                         TYPE_RISCV_CPU_SIFIVE_E51);
+    qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", RESET_VECTOR);
+
+    object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
+    qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
+
+    object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
+                            TYPE_RISCV_HART_ARRAY);
+    qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
+    qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
+    qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type",
+                         TYPE_RISCV_CPU_SIFIVE_U54);
+    qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR);
+}
+
+static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    MicrochipPFSoCState *s = MICROCHIP_PFSOC(dev);
+    const struct MemmapEntry *memmap = microchip_pfsoc_memmap;
+    MemoryRegion *system_memory = get_system_memory();
+    MemoryRegion *e51_dtim_mem = g_new(MemoryRegion, 1);
+    MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
+    MemoryRegion *envm_data = g_new(MemoryRegion, 1);
+    char *plic_hart_config;
+    size_t plic_hart_config_len;
+    int i;
+
+    sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort);
+    sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort);
+    /*
+     * The cluster must be realized after the RISC-V hart array container,
+     * as the container's CPU object is only created on realize, and the
+     * CPU must exist and have been parented into the cluster before the
+     * cluster is realized.
+     */
+    qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
+    qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
+
+    /* E51 DTIM */
+    memory_region_init_ram(e51_dtim_mem, NULL, "microchip.pfsoc.e51_dtim_mem",
+                           memmap[MICROCHIP_PFSOC_E51_DTIM].size, &error_fatal);
+    memory_region_add_subregion(system_memory,
+                                memmap[MICROCHIP_PFSOC_E51_DTIM].base,
+                                e51_dtim_mem);
+
+    /* Bus Error Units */
+    create_unimplemented_device("microchip.pfsoc.buserr_unit0_mem",
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].base,
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT0].size);
+    create_unimplemented_device("microchip.pfsoc.buserr_unit1_mem",
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].base,
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT1].size);
+    create_unimplemented_device("microchip.pfsoc.buserr_unit2_mem",
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].base,
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT2].size);
+    create_unimplemented_device("microchip.pfsoc.buserr_unit3_mem",
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].base,
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT3].size);
+    create_unimplemented_device("microchip.pfsoc.buserr_unit4_mem",
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].base,
+        memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].size);
+
+    /* CLINT */
+    sifive_clint_create(memmap[MICROCHIP_PFSOC_CLINT].base,
+        memmap[MICROCHIP_PFSOC_CLINT].size, 0, ms->smp.cpus,
+        SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, false);
+
+    /* L2 cache controller */
+    create_unimplemented_device("microchip.pfsoc.l2cc",
+        memmap[MICROCHIP_PFSOC_L2CC].base, memmap[MICROCHIP_PFSOC_L2CC].size);
+
+    /*
+     * Add L2-LIM at reset size.
+     * This should be reduced in size as the L2 Cache Controller WayEnable
+     * register is incremented. Unfortunately I don't see a nice (or any) way
+     * to handle reducing or blocking out the L2 LIM while still allowing it
+     * be re returned to all enabled after a reset. For the time being, just
+     * leave it enabled all the time. This won't break anything, but will be
+     * too generous to misbehaving guests.
+     */
+    memory_region_init_ram(l2lim_mem, NULL, "microchip.pfsoc.l2lim",
+                           memmap[MICROCHIP_PFSOC_L2LIM].size, &error_fatal);
+    memory_region_add_subregion(system_memory,
+                                memmap[MICROCHIP_PFSOC_L2LIM].base,
+                                l2lim_mem);
+
+    /* create PLIC hart topology configuration string */
+    plic_hart_config_len = (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1) *
+                           ms->smp.cpus;
+    plic_hart_config = g_malloc0(plic_hart_config_len);
+    for (i = 0; i < ms->smp.cpus; i++) {
+        if (i != 0) {
+            strncat(plic_hart_config, "," MICROCHIP_PFSOC_PLIC_HART_CONFIG,
+                    plic_hart_config_len);
+        } else {
+            strncat(plic_hart_config, "M", plic_hart_config_len);
+        }
+        plic_hart_config_len -= (strlen(MICROCHIP_PFSOC_PLIC_HART_CONFIG) + 1);
+    }
+
+    /* PLIC */
+    s->plic = sifive_plic_create(memmap[MICROCHIP_PFSOC_PLIC].base,
+        plic_hart_config, 0,
+        MICROCHIP_PFSOC_PLIC_NUM_SOURCES,
+        MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES,
+        MICROCHIP_PFSOC_PLIC_PRIORITY_BASE,
+        MICROCHIP_PFSOC_PLIC_PENDING_BASE,
+        MICROCHIP_PFSOC_PLIC_ENABLE_BASE,
+        MICROCHIP_PFSOC_PLIC_ENABLE_STRIDE,
+        MICROCHIP_PFSOC_PLIC_CONTEXT_BASE,
+        MICROCHIP_PFSOC_PLIC_CONTEXT_STRIDE,
+        memmap[MICROCHIP_PFSOC_PLIC].size);
+    g_free(plic_hart_config);
+
+    /* SYSREG */
+    create_unimplemented_device("microchip.pfsoc.sysreg",
+        memmap[MICROCHIP_PFSOC_SYSREG].base,
+        memmap[MICROCHIP_PFSOC_SYSREG].size);
+
+    /* MPUCFG */
+    create_unimplemented_device("microchip.pfsoc.mpucfg",
+        memmap[MICROCHIP_PFSOC_MPUCFG].base,
+        memmap[MICROCHIP_PFSOC_MPUCFG].size);
+
+    /* eNVM */
+    memory_region_init_rom(envm_data, OBJECT(dev), "microchip.pfsoc.envm.data",
+                           memmap[MICROCHIP_PFSOC_ENVM_DATA].size,
+                           &error_fatal);
+    memory_region_add_subregion(system_memory,
+                                memmap[MICROCHIP_PFSOC_ENVM_DATA].base,
+                                envm_data);
+
+    /* IOSCBCFG */
+    create_unimplemented_device("microchip.pfsoc.ioscb.cfg",
+        memmap[MICROCHIP_PFSOC_IOSCB_CFG].base,
+        memmap[MICROCHIP_PFSOC_IOSCB_CFG].size);
+}
+
+static void microchip_pfsoc_soc_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = microchip_pfsoc_soc_realize;
+    /* Reason: Uses serial_hds in realize function, thus can't be used twice */
+    dc->user_creatable = false;
+}
+
+static const TypeInfo microchip_pfsoc_soc_type_info = {
+    .name = TYPE_MICROCHIP_PFSOC,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(MicrochipPFSoCState),
+    .instance_init = microchip_pfsoc_soc_instance_init,
+    .class_init = microchip_pfsoc_soc_class_init,
+};
+
+static void microchip_pfsoc_soc_register_types(void)
+{
+    type_register_static(&microchip_pfsoc_soc_type_info);
+}
+
+type_init(microchip_pfsoc_soc_register_types)
+
+static void microchip_icicle_kit_machine_init(MachineState *machine)
+{
+    MachineClass *mc = MACHINE_GET_CLASS(machine);
+    const struct MemmapEntry *memmap = microchip_pfsoc_memmap;
+    MicrochipIcicleKitState *s = MICROCHIP_ICICLE_KIT_MACHINE(machine);
+    MemoryRegion *system_memory = get_system_memory();
+    MemoryRegion *main_mem = g_new(MemoryRegion, 1);
+
+    /* Sanity check on RAM size */
+    if (machine->ram_size < mc->default_ram_size) {
+        char *sz = size_to_str(mc->default_ram_size);
+        error_report("Invalid RAM size, should be bigger than %s", sz);
+        g_free(sz);
+        exit(EXIT_FAILURE);
+    }
+
+    /* Initialize SoC */
+    object_initialize_child(OBJECT(machine), "soc", &s->soc,
+                            TYPE_MICROCHIP_PFSOC);
+    qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+
+    /* Register RAM */
+    memory_region_init_ram(main_mem, NULL, "microchip.icicle.kit.ram",
+                           machine->ram_size, &error_fatal);
+    memory_region_add_subregion(system_memory,
+                                memmap[MICROCHIP_PFSOC_DRAM].base, main_mem);
+
+    /* Load the firmware */
+    riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL);
+}
+
+static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->desc = "Microchip PolarFire SoC Icicle Kit";
+    mc->init = microchip_icicle_kit_machine_init;
+    mc->max_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT +
+                   MICROCHIP_PFSOC_COMPUTE_CPU_COUNT;
+    mc->min_cpus = MICROCHIP_PFSOC_MANAGEMENT_CPU_COUNT + 1;
+    mc->default_cpus = mc->min_cpus;
+    mc->default_ram_size = 1 * GiB;
+}
+
+static const TypeInfo microchip_icicle_kit_machine_typeinfo = {
+    .name       = MACHINE_TYPE_NAME("microchip-icicle-kit"),
+    .parent     = TYPE_MACHINE,
+    .class_init = microchip_icicle_kit_machine_class_init,
+    .instance_size = sizeof(MicrochipIcicleKitState),
+};
+
+static void microchip_icicle_kit_machine_init_register_types(void)
+{
+    type_register_static(&microchip_icicle_kit_machine_typeinfo);
+}
+
+type_init(microchip_icicle_kit_machine_init_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a22c8b..5359b39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1315,6 +1315,13 @@ F: include/hw/riscv/opentitan.h
 F: include/hw/char/ibex_uart.h
 F: include/hw/intc/ibex_plic.h
 
+Microchip PolarFire SoC Icicle Kit
+M: Bin Meng <bin.meng@windriver.com>
+L: qemu-riscv@nongnu.org
+S: Supported
+F: hw/riscv/microchip_pfsoc.c
+F: include/hw/riscv/microchip_pfsoc.h
+
 RX Machines
 -----------
 rx-gdbsim
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 28947ef..3292fae 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -48,3 +48,9 @@ config RISCV_VIRT
     select PCI_EXPRESS_GENERIC_BRIDGE
     select PFLASH_CFI01
     select SIFIVE
+
+config MICROCHIP_PFSOC
+    bool
+    select HART
+    select SIFIVE
+    select UNIMP
diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build
index 25af9db..cf1aa99 100644
--- a/hw/riscv/meson.build
+++ b/hw/riscv/meson.build
@@ -16,5 +16,6 @@ riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_otp.c'))
 riscv_ss.add(when: 'CONFIG_SIFIVE_U', if_true: files('sifive_u_prci.c'))
 riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('riscv_htif.c'))
 riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c'))
+riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c'))
 
 hw_arch += {'riscv': riscv_ss}
-- 
2.7.4