All of lore.kernel.org
 help / color / mirror / Atom feed
From: Md Sadre Alam <mdalam@codeaurora.org>
To: miquel.raynal@bootlin.com, mani@kernel.org,
	boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: mdalam@codeaurora.org, sricharan@codeaurora.org
Subject: [PATCH 2/5] mtd: rawnand: qcom: Add helper to check last code word
Date: Wed, 24 Feb 2021 01:08:58 +0530	[thread overview]
Message-ID: <1614109141-7531-2-git-send-email-mdalam@codeaurora.org> (raw)
In-Reply-To: <1614109141-7531-1-git-send-email-mdalam@codeaurora.org>

Add the qcom_nandc_is_last_cw() helper which checks if
the input cw index is the last one or not.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 4898d32..9a890ef 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -662,6 +662,12 @@ static void nandc_set_reg(struct nand_chip *chip, int offset,
 		*reg = cpu_to_le32(val);
 }
 
+/* Helper to check the code word, whether it is last cw or not */
+static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
+{
+	return cw == (ecc->steps - 1);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
@@ -1629,7 +1635,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 	oob_size1 = host->bbm_size;
 
-	if (cw == (ecc->steps - 1)) {
+	if (qcom_nandc_is_last_cw(ecc, cw)) {
 		data_size2 = ecc->size - data_size1 -
 			     ((ecc->steps - 1) * 4);
 		oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1710,7 +1716,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
 	}
 
 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
-		if (cw == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, cw)) {
 			data_size = ecc->size - ((ecc->steps - 1) * 4);
 			oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
 		} else {
@@ -1770,7 +1776,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
 		u32 flash, buffer, erased_cw;
 		int data_len, oob_len;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_len = ecc->size - ((ecc->steps - 1) << 2);
 			oob_len = ecc->steps << 2;
 		} else {
@@ -1869,7 +1875,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2048,7 +2054,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2068,7 +2074,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 		 * itself. For the last codeword, we skip the bbm positions and
 		 * write to the free oob area.
 		 */
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			oob_buf += host->bbm_size;
 
 			write_data_dma(nandc, FLASH_BUF_ACC + data_size,
@@ -2123,7 +2129,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 		data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 		oob_size1 = host->bbm_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size2 = ecc->size - data_size1 -
 				     ((ecc->steps - 1) << 2);
 			oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Md Sadre Alam <mdalam@codeaurora.org>
To: miquel.raynal@bootlin.com, mani@kernel.org,
	boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: mdalam@codeaurora.org, sricharan@codeaurora.org
Subject: [PATCH 2/5] mtd: rawnand: qcom: Add helper to check last code word
Date: Wed, 24 Feb 2021 01:08:58 +0530	[thread overview]
Message-ID: <1614109141-7531-2-git-send-email-mdalam@codeaurora.org> (raw)
In-Reply-To: <1614109141-7531-1-git-send-email-mdalam@codeaurora.org>

Add the qcom_nandc_is_last_cw() helper which checks if
the input cw index is the last one or not.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 4898d32..9a890ef 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -662,6 +662,12 @@ static void nandc_set_reg(struct nand_chip *chip, int offset,
 		*reg = cpu_to_le32(val);
 }
 
+/* Helper to check the code word, whether it is last cw or not */
+static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
+{
+	return cw == (ecc->steps - 1);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
@@ -1629,7 +1635,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 	oob_size1 = host->bbm_size;
 
-	if (cw == (ecc->steps - 1)) {
+	if (qcom_nandc_is_last_cw(ecc, cw)) {
 		data_size2 = ecc->size - data_size1 -
 			     ((ecc->steps - 1) * 4);
 		oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1710,7 +1716,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
 	}
 
 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
-		if (cw == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, cw)) {
 			data_size = ecc->size - ((ecc->steps - 1) * 4);
 			oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
 		} else {
@@ -1770,7 +1776,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
 		u32 flash, buffer, erased_cw;
 		int data_len, oob_len;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_len = ecc->size - ((ecc->steps - 1) << 2);
 			oob_len = ecc->steps << 2;
 		} else {
@@ -1869,7 +1875,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2048,7 +2054,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2068,7 +2074,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 		 * itself. For the last codeword, we skip the bbm positions and
 		 * write to the free oob area.
 		 */
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			oob_buf += host->bbm_size;
 
 			write_data_dma(nandc, FLASH_BUF_ACC + data_size,
@@ -2123,7 +2129,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 		data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 		oob_size1 = host->bbm_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size2 = ecc->size - data_size1 -
 				     ((ecc->steps - 1) << 2);
 			oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-02-23 19:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-23 19:38 [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Md Sadre Alam
2021-02-23 19:38 ` Md Sadre Alam
2021-02-23 19:38 ` Md Sadre Alam [this message]
2021-02-23 19:38   ` [PATCH 2/5] mtd: rawnand: qcom: Add helper to check last code word Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:38 ` [PATCH 3/5] mtd: rawnand: qcom: Rename parameter name in macro Md Sadre Alam
2021-02-23 19:38   ` Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:39 ` [PATCH 4/5] mtd: rawnand: qcom: Add helper to configure location register Md Sadre Alam
2021-02-23 19:39   ` Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:39 ` [PATCH 5/5] mtd: rawnand: qcom: update last code word register Md Sadre Alam
2021-02-23 19:39   ` Md Sadre Alam
2021-03-02 16:32 ` [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Miquel Raynal
2021-03-02 16:32   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1614109141-7531-2-git-send-email-mdalam@codeaurora.org \
    --to=mdalam@codeaurora.org \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.