All of lore.kernel.org
 help / color / mirror / Atom feed
From: Md Sadre Alam <mdalam@codeaurora.org>
To: miquel.raynal@bootlin.com, mani@kernel.org,
	boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: mdalam@codeaurora.org, sricharan@codeaurora.org
Subject: [PATCH 5/5] mtd: rawnand: qcom: update last code word register
Date: Wed, 24 Feb 2021 01:09:01 +0530	[thread overview]
Message-ID: <1614109141-7531-5-git-send-email-mdalam@codeaurora.org> (raw)
In-Reply-To: <1614109141-7531-1-git-send-email-mdalam@codeaurora.org>

From QPIC v2 onwards a new register got added to read last
code word.Add support for this READ_LOCATION_LAST_CW_n
register.

In the case of QPIC v2, codewords 0, 1 and 2 will be accessed
through READ_LOCATION_n, while codeword 3 will be accessed
through READ_LOCATION_LAST_CW_n.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 79 ++++++++++++++++++++++++++++-----------
 1 file changed, 58 insertions(+), 21 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 57d2ad02..754c009 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -48,6 +48,10 @@
 #define	NAND_READ_LOCATION_1		0xf24
 #define	NAND_READ_LOCATION_2		0xf28
 #define	NAND_READ_LOCATION_3		0xf2c
+#define	NAND_READ_LOCATION_LAST_CW_0	0xf40
+#define	NAND_READ_LOCATION_LAST_CW_1	0xf44
+#define	NAND_READ_LOCATION_LAST_CW_2	0xf48
+#define	NAND_READ_LOCATION_LAST_CW_3	0xf4c
 
 /* dummy register offsets, used by write_reg_dma */
 #define	NAND_DEV_CMD1_RESTORE		0xdead
@@ -187,6 +191,11 @@ nandc_set_reg(chip, reg,			\
 	      ((read_size) << READ_LOCATION_SIZE) |			\
 	      ((is_last_read_loc) << READ_LOCATION_LAST))
 
+#define nandc_set_read_loc_last(chip, reg, cw_offset, read_size, is_last_read_loc)	\
+nandc_set_reg(chip, reg,			\
+	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
+	      ((read_size) << READ_LOCATION_SIZE) |			\
+	      ((is_last_read_loc) << READ_LOCATION_LAST))
 /*
  * Returns the actual register address for all NAND_DEV_ registers
  * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
@@ -316,6 +325,10 @@ struct nandc_regs {
 	__le32 read_location1;
 	__le32 read_location2;
 	__le32 read_location3;
+	__le32 read_location_last0;
+	__le32 read_location_last1;
+	__le32 read_location_last2;
+	__le32 read_location_last3;
 
 	__le32 erased_cw_detect_cfg_clr;
 	__le32 erased_cw_detect_cfg_set;
@@ -644,6 +657,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
 		return &regs->read_location2;
 	case NAND_READ_LOCATION_3:
 		return &regs->read_location3;
+	case NAND_READ_LOCATION_LAST_CW_0:
+		return &regs->read_location_last0;
+	case NAND_READ_LOCATION_LAST_CW_1:
+		return &regs->read_location_last1;
+	case NAND_READ_LOCATION_LAST_CW_2:
+		return &regs->read_location_last2;
+	case NAND_READ_LOCATION_LAST_CW_3:
+		return &regs->read_location_last3;
 	default:
 		return NULL;
 	}
@@ -672,12 +693,22 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
 static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
 				int cw_offset, int read_size, int is_last_read_loc)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
 	int reg_base = NAND_READ_LOCATION_0;
 
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg_base = NAND_READ_LOCATION_LAST_CW_0;
+
 	reg_base += reg * 4;
 
-	return nandc_set_read_loc_first(chip, reg_base, cw_offset,
-			read_size, is_last_read_loc);
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		return nandc_set_read_loc_last(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
+	else
+		return nandc_set_read_loc_first(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
 }
 
 /* helper to configure address register values */
@@ -698,8 +729,9 @@ static void set_address(struct qcom_nand_host *host, u16 column, int page)
  *
  * @num_cw:		number of steps for the read/write operation
  * @read:		read or write operation
+ * @cw	:		which code word
  */
-static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, int cw)
 {
 	struct nand_chip *chip = &host->chip;
 	u32 cmd, cfg0, cfg1, ecc_bch_cfg;
@@ -737,7 +769,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1113,13 +1145,18 @@ static void config_nand_page_read(struct nand_chip *chip)
  * before reading each codeword in NAND page.
  */
 static void
-config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
+config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
 {
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	int reg = NAND_READ_LOCATION_0;
+
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg = NAND_READ_LOCATION_LAST_CW_0;
 
 	if (nandc->props->is_bam)
-		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
-			      NAND_BAM_NEXT_SGL);
+		write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
@@ -1139,10 +1176,10 @@ config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
  */
 static void
 config_nand_single_cw_page_read(struct nand_chip *chip,
-				bool use_ecc)
+				bool use_ecc, int cw)
 {
 	config_nand_page_read(chip);
-	config_nand_cw_read(chip, use_ecc);
+	config_nand_cw_read(chip, use_ecc, cw);
 }
 
 /*
@@ -1240,7 +1277,7 @@ static int nandc_param(struct qcom_nand_host *host)
 	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
-	config_nand_single_cw_page_read(chip, false);
+	config_nand_single_cw_page_read(chip, false, 0);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
 		      nandc->buf_count, 0);
@@ -1517,7 +1554,7 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
 
 		host->use_ecc = true;
 		set_address(host, 0, page_addr);
-		update_rw_regs(host, ecc->steps, true);
+		update_rw_regs(host, ecc->steps, true, 0);
 		break;
 
 	case NAND_CMD_SEQIN:
@@ -1641,7 +1678,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 
 	clear_bam_transaction(nandc);
 	set_address(host, host->cw_size * cw, page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, cw);
 	config_nand_page_read(chip);
 
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
@@ -1670,7 +1707,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
-	config_nand_cw_read(chip, false);
+	config_nand_cw_read(chip, false, cw);
 
 	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 	reg_off += data_size1;
@@ -1909,7 +1946,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 			}
 		}
 
-		config_nand_cw_read(chip, true);
+		config_nand_cw_read(chip, true, i);
 
 		if (data_buf)
 			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
@@ -1969,9 +2006,9 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	memset(nandc->data_buffer, 0xff, size);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, ecc->steps - 1);
 
-	config_nand_single_cw_page_read(chip, host->use_ecc);
+	config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - 1);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
 
@@ -2036,7 +2073,7 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 
 	host->use_ecc = true;
 	set_address(host, 0, page);
-	update_rw_regs(host, ecc->steps, true);
+	update_rw_regs(host, ecc->steps, true, 0);
 
 	return read_page_ecc(host, NULL, chip->oob_poi, page);
 }
@@ -2060,7 +2097,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = true;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
 	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
@@ -2131,7 +2168,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = false;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
 	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
@@ -2214,7 +2251,7 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 				    0, mtd->oobavail);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, 0);
 
 	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
@@ -2293,7 +2330,7 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
 	/* prepare write */
 	host->use_ecc = false;
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, ecc->steps - 1);
 
 	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Md Sadre Alam <mdalam@codeaurora.org>
To: miquel.raynal@bootlin.com, mani@kernel.org,
	boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: mdalam@codeaurora.org, sricharan@codeaurora.org
Subject: [PATCH 5/5] mtd: rawnand: qcom: update last code word register
Date: Wed, 24 Feb 2021 01:09:01 +0530	[thread overview]
Message-ID: <1614109141-7531-5-git-send-email-mdalam@codeaurora.org> (raw)
In-Reply-To: <1614109141-7531-1-git-send-email-mdalam@codeaurora.org>

From QPIC v2 onwards a new register got added to read last
code word.Add support for this READ_LOCATION_LAST_CW_n
register.

In the case of QPIC v2, codewords 0, 1 and 2 will be accessed
through READ_LOCATION_n, while codeword 3 will be accessed
through READ_LOCATION_LAST_CW_n.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 79 ++++++++++++++++++++++++++++-----------
 1 file changed, 58 insertions(+), 21 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 57d2ad02..754c009 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -48,6 +48,10 @@
 #define	NAND_READ_LOCATION_1		0xf24
 #define	NAND_READ_LOCATION_2		0xf28
 #define	NAND_READ_LOCATION_3		0xf2c
+#define	NAND_READ_LOCATION_LAST_CW_0	0xf40
+#define	NAND_READ_LOCATION_LAST_CW_1	0xf44
+#define	NAND_READ_LOCATION_LAST_CW_2	0xf48
+#define	NAND_READ_LOCATION_LAST_CW_3	0xf4c
 
 /* dummy register offsets, used by write_reg_dma */
 #define	NAND_DEV_CMD1_RESTORE		0xdead
@@ -187,6 +191,11 @@ nandc_set_reg(chip, reg,			\
 	      ((read_size) << READ_LOCATION_SIZE) |			\
 	      ((is_last_read_loc) << READ_LOCATION_LAST))
 
+#define nandc_set_read_loc_last(chip, reg, cw_offset, read_size, is_last_read_loc)	\
+nandc_set_reg(chip, reg,			\
+	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
+	      ((read_size) << READ_LOCATION_SIZE) |			\
+	      ((is_last_read_loc) << READ_LOCATION_LAST))
 /*
  * Returns the actual register address for all NAND_DEV_ registers
  * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
@@ -316,6 +325,10 @@ struct nandc_regs {
 	__le32 read_location1;
 	__le32 read_location2;
 	__le32 read_location3;
+	__le32 read_location_last0;
+	__le32 read_location_last1;
+	__le32 read_location_last2;
+	__le32 read_location_last3;
 
 	__le32 erased_cw_detect_cfg_clr;
 	__le32 erased_cw_detect_cfg_set;
@@ -644,6 +657,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
 		return &regs->read_location2;
 	case NAND_READ_LOCATION_3:
 		return &regs->read_location3;
+	case NAND_READ_LOCATION_LAST_CW_0:
+		return &regs->read_location_last0;
+	case NAND_READ_LOCATION_LAST_CW_1:
+		return &regs->read_location_last1;
+	case NAND_READ_LOCATION_LAST_CW_2:
+		return &regs->read_location_last2;
+	case NAND_READ_LOCATION_LAST_CW_3:
+		return &regs->read_location_last3;
 	default:
 		return NULL;
 	}
@@ -672,12 +693,22 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
 static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
 				int cw_offset, int read_size, int is_last_read_loc)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
 	int reg_base = NAND_READ_LOCATION_0;
 
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg_base = NAND_READ_LOCATION_LAST_CW_0;
+
 	reg_base += reg * 4;
 
-	return nandc_set_read_loc_first(chip, reg_base, cw_offset,
-			read_size, is_last_read_loc);
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		return nandc_set_read_loc_last(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
+	else
+		return nandc_set_read_loc_first(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
 }
 
 /* helper to configure address register values */
@@ -698,8 +729,9 @@ static void set_address(struct qcom_nand_host *host, u16 column, int page)
  *
  * @num_cw:		number of steps for the read/write operation
  * @read:		read or write operation
+ * @cw	:		which code word
  */
-static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, int cw)
 {
 	struct nand_chip *chip = &host->chip;
 	u32 cmd, cfg0, cfg1, ecc_bch_cfg;
@@ -737,7 +769,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1113,13 +1145,18 @@ static void config_nand_page_read(struct nand_chip *chip)
  * before reading each codeword in NAND page.
  */
 static void
-config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
+config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
 {
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	int reg = NAND_READ_LOCATION_0;
+
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg = NAND_READ_LOCATION_LAST_CW_0;
 
 	if (nandc->props->is_bam)
-		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
-			      NAND_BAM_NEXT_SGL);
+		write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
@@ -1139,10 +1176,10 @@ config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
  */
 static void
 config_nand_single_cw_page_read(struct nand_chip *chip,
-				bool use_ecc)
+				bool use_ecc, int cw)
 {
 	config_nand_page_read(chip);
-	config_nand_cw_read(chip, use_ecc);
+	config_nand_cw_read(chip, use_ecc, cw);
 }
 
 /*
@@ -1240,7 +1277,7 @@ static int nandc_param(struct qcom_nand_host *host)
 	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
-	config_nand_single_cw_page_read(chip, false);
+	config_nand_single_cw_page_read(chip, false, 0);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
 		      nandc->buf_count, 0);
@@ -1517,7 +1554,7 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
 
 		host->use_ecc = true;
 		set_address(host, 0, page_addr);
-		update_rw_regs(host, ecc->steps, true);
+		update_rw_regs(host, ecc->steps, true, 0);
 		break;
 
 	case NAND_CMD_SEQIN:
@@ -1641,7 +1678,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 
 	clear_bam_transaction(nandc);
 	set_address(host, host->cw_size * cw, page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, cw);
 	config_nand_page_read(chip);
 
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
@@ -1670,7 +1707,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
-	config_nand_cw_read(chip, false);
+	config_nand_cw_read(chip, false, cw);
 
 	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 	reg_off += data_size1;
@@ -1909,7 +1946,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 			}
 		}
 
-		config_nand_cw_read(chip, true);
+		config_nand_cw_read(chip, true, i);
 
 		if (data_buf)
 			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
@@ -1969,9 +2006,9 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	memset(nandc->data_buffer, 0xff, size);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, ecc->steps - 1);
 
-	config_nand_single_cw_page_read(chip, host->use_ecc);
+	config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - 1);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
 
@@ -2036,7 +2073,7 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 
 	host->use_ecc = true;
 	set_address(host, 0, page);
-	update_rw_regs(host, ecc->steps, true);
+	update_rw_regs(host, ecc->steps, true, 0);
 
 	return read_page_ecc(host, NULL, chip->oob_poi, page);
 }
@@ -2060,7 +2097,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = true;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
 	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
@@ -2131,7 +2168,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = false;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
 	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
@@ -2214,7 +2251,7 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 				    0, mtd->oobavail);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, 0);
 
 	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
@@ -2293,7 +2330,7 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
 	/* prepare write */
 	host->use_ecc = false;
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, ecc->steps - 1);
 
 	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2021-02-23 19:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-23 19:38 [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Md Sadre Alam
2021-02-23 19:38 ` Md Sadre Alam
2021-02-23 19:38 ` [PATCH 2/5] mtd: rawnand: qcom: Add helper to check last code word Md Sadre Alam
2021-02-23 19:38   ` Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:38 ` [PATCH 3/5] mtd: rawnand: qcom: Rename parameter name in macro Md Sadre Alam
2021-02-23 19:38   ` Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:39 ` [PATCH 4/5] mtd: rawnand: qcom: Add helper to configure location register Md Sadre Alam
2021-02-23 19:39   ` Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-03-02 16:32     ` Miquel Raynal
2021-02-23 19:39 ` Md Sadre Alam [this message]
2021-02-23 19:39   ` [PATCH 5/5] mtd: rawnand: qcom: update last code word register Md Sadre Alam
2021-03-02 16:32 ` [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Miquel Raynal
2021-03-02 16:32   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1614109141-7531-5-git-send-email-mdalam@codeaurora.org \
    --to=mdalam@codeaurora.org \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.