[PATCH v5 0/3] add support for the lmk04832

[PATCH v5 0/3] add support for the lmk04832

[Liam Beguin]

From: Liam Beguin <lvb@xiphos.com>

Hi,

The LMK04832 is an ultra-high performance clock conditioner with JEDEC
JESD204B support and is also pin compatible with the LMK0482x family of
devices.

This driver adds initial support to configure the LMK04832 clocks using
the clock framework.

This has been tested on a system using JESD204B subclass 1.

At the moment, the VCO rate has to be set manually from the devicetree
and a dclk (or sclk) rate change isn't propagated to the VCO
automatically.

Changes since v1:
- add yaml devicetree documentation,
- add links to datasheet,
- use {u8,u16,u32} instead of Uint_ variants,
- drop redundant debugfs code,
- use a pointer to device_info instead of struct copy,
- add of_device_id table,
- add support for SYSREF digital delay and JESD204B subclass 1

Changes since v2:
- fix dt-bindings documentation, apologies for the broken build
- fix property vendor prefixes
- split dt-bindings into a separate patch

Changes since v3:
- add missing properties in dt-bindings

Changes since v3:
- address coccicheck comments
- update dt-bindings


Thanks for your time,
Liam

Liam Beguin (3):
  clk: add support for the lmk04832
  clk: lmk04832: add support for digital delay
  dt-bindings: clock: add ti,lmk04832 bindings

 .../bindings/clock/ti,lmk04832.yaml           |  209 +++
 drivers/clk/Kconfig                           |    7 +
 drivers/clk/Makefile                          |    1 +
 drivers/clk/clk-lmk04832.c                    | 1596 +++++++++++++++++
 4 files changed, 1813 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
 create mode 100644 drivers/clk/clk-lmk04832.c

Range-diff against v4:
1:  cb6a8ea514d8 ! 1:  11461912b3c4 clk: add support for the lmk04832
    @@ drivers/clk/clk-lmk04832.c (new)
     +		if (ret) {
     +			dev_err(lmk->dev, "missing reg property in child: %s\n",
     +				child->full_name);
    ++			of_node_put(child);
     +			goto err_disable_oscin;
     +		}
     +
    @@ drivers/clk/clk-lmk04832.c (new)
     +
     +		lmk->clkout[reg].sysref =
     +			of_property_read_bool(child, "ti,clkout-sysref");
    -+	};
    ++	}
     +
     +	lmk->regmap = devm_regmap_init_spi(spi, &regmap_config);
     +	if (IS_ERR(lmk->regmap)) {
2:  8464eac02aab = 2:  01b64b5af4ed clk: lmk04832: add support for digital delay
3:  a2c4e8d53d1c ! 3:  96b514765de0 dt-bindings: clock: add ti,lmk04832 bindings
    @@ Documentation/devicetree/bindings/clock/ti,lmk04832.yaml (new)
     +    const: 1
     +
     +  spi-max-frequency:
    -+    $ref: /schemas/types.yaml#/definitions/uint32
    -+    description:
    -+      Maximum SPI clocking speed of the device in Hz.
    ++    maximum: 5000000
     +
     +  clocks:
     +    items:
    @@ Documentation/devicetree/bindings/clock/ti,lmk04832.yaml (new)
     +    required:
     +      - reg
     +
    ++    additionalProperties: false
    ++
     +required:
     +  - compatible
     +  - reg

base-commit: f40ddce88593482919761f74910f42f4b84c004b
-- 
2.30.1.489.g328c10930387

[PATCH v5 1/3] clk: add support for the lmk04832

[Liam Beguin]

From: Liam Beguin <lvb@xiphos.com>

The LMK04832 is an ultra-high performance clock conditioner with JEDEC
JESD204B support and is also pin compatible with the LMK0482x family of
devices.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
 drivers/clk/Kconfig        |    7 +
 drivers/clk/Makefile       |    1 +
 drivers/clk/clk-lmk04832.c | 1287 ++++++++++++++++++++++++++++++++++++
 3 files changed, 1295 insertions(+)
 create mode 100644 drivers/clk/clk-lmk04832.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 85856cff506c..1eea7fa8f394 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -55,6 +55,13 @@ config CLK_HSDK
 	  This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
 	  control.
 
+config LMK04832
+	tristate "Ti LMK04832 JESD204B Compliant Clock Jitter Cleaner"
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Texas Instruments' LMK04832 Ultra
+	  Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
+
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77620/77686/77802 MFD"
 	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index dbdc590e7de3..ec2c0437e548 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
+obj-$(CONFIG_LMK04832)			+= clk-lmk04832.o
 obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
diff --git a/drivers/clk/clk-lmk04832.c b/drivers/clk/clk-lmk04832.c
new file mode 100644
index 000000000000..48eb4817112b
--- /dev/null
+++ b/drivers/clk/clk-lmk04832.c
@@ -0,0 +1,1287 @@
+/*
+ * LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner
+ * Pin compatible with the LMK0482x family
+ *
+ * Datasheet: https://www.ti.com/lit/ds/symlink/lmk04832.pdf
+ *
+ * Copyright (c) 2020, Xiphos Systems Corp.
+ *
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/gcd.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+/* 0x000 - 0x00d System Functions */
+#define LMK04832_REG_RST3W		0x000
+#define LMK04832_BIT_RESET			BIT(7)
+#define LMK04832_BIT_SPI_3WIRE_DIS		BIT(4)
+#define LMK04832_REG_POWERDOWN		0x002
+#define LMK04832_REG_ID_DEV_TYPE	0x003
+#define LMK04832_REG_ID_PROD_MSB	0x004
+#define LMK04832_REG_ID_PROD_LSB	0x005
+#define LMK04832_REG_ID_MASKREV		0x006
+#define LMK04832_REG_ID_VNDR_MSB	0x00c
+#define LMK04832_REG_ID_VNDR_LSB	0x00d
+
+/* 0x100 - 0x137 Device Clock and SYSREF Clock Output Control */
+#define LMK04832_REG_CLKOUT_CTRL0(ch)	(0x100 + (ch >> 1) * 8)
+#define LMK04832_BIT_DCLK_DIV_LSB		GENMASK(7, 0)
+#define LMK04832_REG_CLKOUT_CTRL1(ch)	(0x101 + (ch >> 1) * 8)
+#define LMK04832_REG_CLKOUT_CTRL2(ch)	(0x102 + (ch >> 1) * 8)
+#define LMK04832_BIT_CLKOUTX_Y_PD		BIT(7)
+#define LMK04832_BIT_DCLK_DIV_MSB		GENMASK(1, 0)
+#define LMK04832_REG_CLKOUT_SRC_MUX(ch)	(0x103 + (ch % 2) + (ch >> 1) * 8)
+#define LMK04832_BIT_CLKOUT_SRC_MUX		BIT(5)
+#define LMK04832_REG_CLKOUT_CTRL3(ch)	(0x103 + (ch >> 1) * 8)
+#define LMK04832_BIT_DCLKX_Y_PD			BIT(4)
+#define LMK04832_BIT_DCLKX_Y_DCC		BIT(2)
+#define LMK04832_REG_CLKOUT_CTRL4(ch)	(0x104 + (ch >> 1) * 8)
+#define LMK04832_BIT_SCLK_PD			BIT(4)
+#define LMK04832_REG_CLKOUT_FMT(ch)	(0x107 + (ch >> 1) * 8)
+#define LMK04832_BIT_CLKOUT_FMT(ch)		(ch % 2 ? 0xf0 : 0x0f)
+#define LMK04832_VAL_CLKOUT_FMT_POWERDOWN		0x00
+#define LMK04832_VAL_CLKOUT_FMT_LVDS			0x01
+#define LMK04832_VAL_CLKOUT_FMT_HSDS6			0x02
+#define LMK04832_VAL_CLKOUT_FMT_HSDS8			0x03
+#define LMK04832_VAL_CLKOUT_FMT_LVPECL1600		0x04
+#define LMK04832_VAL_CLKOUT_FMT_LVPECL2000		0x05
+#define LMK04832_VAL_CLKOUT_FMT_LCPECL			0x06
+#define LMK04832_VAL_CLKOUT_FMT_CML16			0x07
+#define LMK04832_VAL_CLKOUT_FMT_CML24			0x08
+#define LMK04832_VAL_CLKOUT_FMT_CML32			0x09
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_OFF_INV		0x0a
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_OFF		0x0b
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_INV_INV		0x0c
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_INV_NOR		0x0d
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_INV		0x0e
+#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_NOR		0x0f
+
+/* 0x138 - 0x145 SYSREF, SYNC, and Device Config */
+#define LMK04832_REG_VCO_OSCOUT		0x138
+#define LMK04832_BIT_VCO_MUX			GENMASK(6, 5)
+#define LMK04832_VAL_VCO_MUX_VCO0			0x00
+#define LMK04832_VAL_VCO_MUX_VCO1			0x01
+#define LMK04832_VAL_VCO_MUX_EXT			0x02
+#define LMK04832_REG_SYSREF_OUT		0x139
+#define LMK04832_BIT_SYSREF_MUX			GENMASK(1, 0)
+#define LMK04832_VAL_SYSREF_MUX_CONTINUOUS		0x03
+#define LMK04832_REG_SYSREF_DIV_MSB	0x13a
+#define LMK04832_BIT_SYSREF_DIV_MSB		GENMASK(4, 0)
+#define LMK04832_REG_SYSREF_DIV_LSB	0x13b
+#define LMK04832_REG_FB_CTRL		0x13f
+#define LMK04832_BIT_PLL2_RCLK_MUX		BIT(7)
+#define LMK04832_VAL_PLL2_RCLK_MUX_OSCIN		0x00
+#define LMK04832_VAL_PLL2_RCLK_MUX_CLKIN		0x01
+#define LMK04832_BIT_PLL2_NCLK_MUX		BIT(5)
+#define LMK04832_VAL_PLL2_NCLK_MUX_PLL2_P		0x00
+#define LMK04832_VAL_PLL2_NCLK_MUX_FB_MUX		0x01
+#define LMK04832_BIT_FB_MUX_EN			BIT(0)
+#define LMK04832_REG_MAIN_PD		0x140
+#define LMK04832_BIT_PLL1_PD			BIT(7)
+#define LMK04832_BIT_VCO_LDO_PD			BIT(6)
+#define LMK04832_BIT_VCO_PD			BIT(5)
+#define LMK04832_BIT_OSCIN_PD			BIT(4)
+#define LMK04832_BIT_SYSREF_GBL_PD		BIT(3)
+#define LMK04832_BIT_SYSREF_PD			BIT(2)
+#define LMK04832_BIT_SYSREF_DDLY_PD		BIT(1)
+#define LMK04832_BIT_SYSREF_PLSR_PD		BIT(0)
+#define LMK04832_REG_SYNC		0x143
+#define LMK04832_BIT_SYNC_EN			BIT(4)
+#define LMK04832_REG_SYNC_DIS		0x144
+
+/* 0x146 - 0x14a CLKin Control */
+#define LMK04832_REG_CLKIN_SEL0		0x148
+#define LMK04832_REG_CLKIN_SEL1		0x149
+#define LMK04832_REG_CLKIN_RST		0x14a
+#define LMK04832_BIT_SDIO_RDBK_TYPE		BIT(6)
+#define LMK04832_BIT_CLKIN_SEL_MUX		GENMASK(5, 3)
+#define LMK04832_VAL_CLKIN_SEL_MUX_SPI_RDBK		0x06
+#define LMK04832_BIT_CLKIN_SEL_TYPE		GENMASK(2, 0)
+#define LMK04832_VAL_CLKIN_SEL_TYPE_OUT			0x03
+
+/* 0x14b - 0x152 Holdover */
+
+/* 0x153 - 0x15f PLL1 Configuration */
+
+/* 0x160 - 0x16e PLL2 Configuration */
+#define LMK04832_REG_PLL2_R_MSB		0x160
+#define LMK04832_BIT_PLL2_R_MSB			GENMASK(3, 0)
+#define LMK04832_REG_PLL2_R_LSB		0x161
+#define LMK04832_REG_PLL2_MISC		0x162
+#define LMK04832_BIT_PLL2_MISC_P		GENMASK(7, 5)
+#define LMK04832_BIT_PLL2_MISC_REF_2X_EN	BIT(0)
+#define LMK04832_REG_PLL2_N_CAL_0	0x163
+#define LMK04832_BIT_PLL2_N_CAL_0		GENMASK(1, 0)
+#define LMK04832_REG_PLL2_N_CAL_1	0x164
+#define LMK04832_REG_PLL2_N_CAL_2	0x165
+#define LMK04832_REG_PLL2_N_0		0x166
+#define LMK04832_BIT_PLL2_N_0			GENMASK(1, 0)
+#define LMK04832_REG_PLL2_N_1		0x167
+#define LMK04832_REG_PLL2_N_2		0x168
+#define LMK04832_REG_PLL2_DLD_CNT_LSB	0x16b
+#define LMK04832_REG_PLL2_LD		0x16e
+#define LMK04832_BIT_PLL2_LD_MUX		GENMASK(7, 3)
+#define LMK04832_VAL_PLL2_LD_MUX_PLL2_DLD		0x02
+#define LMK04832_BIT_PLL2_LD_TYPE		GENMASK(2, 0)
+#define LMK04832_VAL_PLL2_LD_TYPE_OUT_PP		0x03
+
+/* 0x16F - 0x555 Misc Registers */
+#define LMK04832_REG_PLL2_PD		0x173
+#define LMK04832_BIT_PLL2_PRE_PD		BIT(6)
+#define LMK04832_BIT_PLL2_PD			BIT(5)
+#define LMK04832_REG_PLL1R_RST		0x177
+#define LMK04832_REG_CLR_PLL_LOST	0x182
+#define LMK04832_REG_RB_PLL_LD		0x183
+#define LMK04832_REG_RB_CLK_DAC_VAL_MSB	0x184
+#define LMK04832_REG_RB_DAC_VAL_LSB	0x185
+#define LMK04832_REG_RB_HOLDOVER	0x188
+#define LMK04832_REG_SPI_LOCK		0x555
+
+enum lmk04832_device_types {
+	LMK04832,
+};
+
+/**
+ * lmk04832_device_info - Holds static device information that is specific to
+ *                        the chip revision
+ *
+ * pid:          Product Identifier
+ * maskrev:      IC version identifier
+ * num_channels: Number of available output channels (clkout count)
+ * vco0_range:   {min, max} of the VCO0 operating range (in MHz)
+ * vco1_range:   {min, max} of the VCO1 operating range (in MHz)
+ */
+struct lmk04832_device_info {
+	u16 pid;
+	u8 maskrev;
+	size_t num_channels;
+	unsigned int vco0_range[2];
+	unsigned int vco1_range[2];
+};
+
+const struct lmk04832_device_info lmk04832_device_info[] = {
+	[LMK04832] = {
+		.pid = 0x63d1, /* WARNING PROD_ID is inverted in the datasheet */
+		.maskrev = 0x70,
+		.num_channels = 14,
+		.vco0_range = { 2440, 2580 },
+		.vco1_range = { 2945, 3255 },
+	},
+};
+
+enum lmk04832_rdbk_type {
+	RDBK_CLKIN_SEL0,
+	RDBK_CLKIN_SEL1,
+	RDBK_RESET,
+};
+
+struct lmk_dclk {
+	struct lmk04832 *lmk;
+	struct clk_hw hw;
+	u8 id;
+};
+
+struct lmk_clkout {
+	struct lmk04832 *lmk;
+	struct clk_hw hw;
+	bool sysref;
+	u32 format;
+	u8 id;
+};
+
+/**
+ * struct lmk04832 - The LMK04832 device structure
+ *
+ * @dev: reference to a struct device, linked to the spi_device
+ * @regmap: struct regmap instance use to access the chip
+ * @oscin: PLL2 input clock
+ * @vco: reference to the internal VCO clock
+ * @sclk: reference to the internal sysref clock (SCLK)
+ * @vco_rate: user provided VCO rate
+ * @reset_gpio: reference to the reset GPIO
+ * @dclk: list of internal device clock references.
+ *        Each pair of clkout clocks share a single device clock (DCLKX_Y)
+ * @clkout: list of output clock references
+ * @clk_data: holds clkout related data like clk_hw* and number of clocks
+ */
+struct lmk04832 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	struct clk *oscin;
+	struct clk_hw vco;
+	struct clk_hw sclk;
+	unsigned int vco_rate;
+
+	struct gpio_desc *reset_gpio;
+
+	struct lmk_dclk *dclk;
+	struct lmk_clkout *clkout;
+	struct clk_hw_onecell_data *clk_data;
+};
+
+static bool lmk04832_regmap_rd_regs(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LMK04832_REG_RST3W ... LMK04832_REG_ID_MASKREV:
+		fallthrough;
+	case LMK04832_REG_ID_VNDR_MSB:
+		fallthrough;
+	case LMK04832_REG_ID_VNDR_LSB:
+		fallthrough;
+	case LMK04832_REG_CLKOUT_CTRL0(0) ... LMK04832_REG_PLL2_DLD_CNT_LSB:
+		fallthrough;
+	case LMK04832_REG_PLL2_LD:
+		fallthrough;
+	case LMK04832_REG_PLL2_PD:
+		fallthrough;
+	case LMK04832_REG_PLL1R_RST:
+		fallthrough;
+	case LMK04832_REG_CLR_PLL_LOST ... LMK04832_REG_RB_DAC_VAL_LSB:
+		fallthrough;
+	case LMK04832_REG_RB_HOLDOVER:
+		fallthrough;
+	case LMK04832_REG_SPI_LOCK:
+		return true;
+	default:
+		return false;
+	};
+};
+
+static bool lmk04832_regmap_wr_regs(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LMK04832_REG_RST3W:
+		fallthrough;
+	case LMK04832_REG_POWERDOWN:
+		return true;
+	case LMK04832_REG_ID_DEV_TYPE ... LMK04832_REG_ID_MASKREV:
+		fallthrough;
+	case LMK04832_REG_ID_VNDR_MSB:
+		fallthrough;
+	case LMK04832_REG_ID_VNDR_LSB:
+		return false;
+	case LMK04832_REG_CLKOUT_CTRL0(0) ... LMK04832_REG_PLL2_DLD_CNT_LSB:
+		fallthrough;
+	case LMK04832_REG_PLL2_LD:
+		fallthrough;
+	case LMK04832_REG_PLL2_PD:
+		fallthrough;
+	case LMK04832_REG_PLL1R_RST:
+		fallthrough;
+	case LMK04832_REG_CLR_PLL_LOST ... LMK04832_REG_RB_DAC_VAL_LSB:
+		fallthrough;
+	case LMK04832_REG_RB_HOLDOVER:
+		fallthrough;
+	case LMK04832_REG_SPI_LOCK:
+		return true;
+	default:
+		return false;
+	};
+};
+
+static const struct regmap_config regmap_config = {
+	.name = "lmk04832",
+	.reg_bits = 16,
+	.val_bits = 8,
+	.use_single_read = 1,
+	.use_single_write = 1,
+	.read_flag_mask = 0x80,
+	.write_flag_mask = 0x00,
+	.readable_reg = lmk04832_regmap_rd_regs,
+	.writeable_reg = lmk04832_regmap_wr_regs,
+	.cache_type = REGCACHE_NONE,
+	.max_register = LMK04832_REG_SPI_LOCK,
+};
+
+static int lmk04832_vco_is_enabled(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+	unsigned int tmp;
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_MAIN_PD, &tmp);
+	if (ret)
+		return ret;
+
+	return !(FIELD_GET(LMK04832_BIT_OSCIN_PD, tmp) |
+		 FIELD_GET(LMK04832_BIT_VCO_PD, tmp) |
+		 FIELD_GET(LMK04832_BIT_VCO_LDO_PD, tmp));
+}
+
+static int lmk04832_vco_prepare(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+	int ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_PD,
+				 LMK04832_BIT_PLL2_PRE_PD |
+				 LMK04832_BIT_PLL2_PD,
+				 0x00);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+				  LMK04832_BIT_VCO_LDO_PD |
+				  LMK04832_BIT_VCO_PD |
+				  LMK04832_BIT_OSCIN_PD, 0x00);
+}
+
+static void lmk04832_vco_unprepare(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+
+	regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_PD,
+			   LMK04832_BIT_PLL2_PRE_PD | LMK04832_BIT_PLL2_PD,
+			   0xff);
+
+	/* Don't set LMK04832_BIT_OSCIN_PD since other clocks depend on it */
+	regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+			   LMK04832_BIT_VCO_LDO_PD | LMK04832_BIT_VCO_PD, 0xff);
+}
+
+static unsigned long lmk04832_vco_recalc_rate(struct clk_hw *hw,
+					      unsigned long prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+	unsigned int pll2_p[] = {8, 2, 2, 3, 4, 5, 6, 7};
+	unsigned int pll2_n, p, pll2_r;
+	unsigned int pll2_misc;
+	unsigned long vco_rate;
+	u8 tmp[3];
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_PLL2_MISC, &pll2_misc);
+	if (ret)
+		return ret;
+
+	p = FIELD_GET(LMK04832_BIT_PLL2_MISC_P, pll2_misc);
+
+	ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_PLL2_N_0, &tmp, 3);
+	if (ret)
+		return ret;
+
+	pll2_n = FIELD_PREP(0x030000, tmp[0]) |
+		 FIELD_PREP(0x00ff00, tmp[1]) |
+		 FIELD_PREP(0x0000ff, tmp[2]);
+
+	ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_PLL2_R_MSB, &tmp, 2);
+	if (ret)
+		return ret;
+
+	pll2_r = FIELD_PREP(0x0f00, tmp[0]) |
+		 FIELD_PREP(0x00ff, tmp[1]);
+
+	vco_rate = (prate << FIELD_GET(LMK04832_BIT_PLL2_MISC_REF_2X_EN,
+				       pll2_misc)) * pll2_n * pll2_p[p] / pll2_r;
+
+	return vco_rate;
+};
+
+/**
+ * lmk04832_check_vco_ranges - Check requested VCO frequency against VCO ranges
+ *
+ * @lmk:   Reference to the lmk device
+ * @rate:  Desired output rate for the VCO
+ *
+ * The LMK04832 has 2 internal VCO, each with independant operating ranges.
+ * Use the device_info structure to determine which VCO to use based on rate.
+ *
+ * Returns VCO_MUX value or negative errno.
+ */
+static int lmk04832_check_vco_ranges(struct lmk04832 *lmk, unsigned long rate)
+{
+	struct spi_device *spi = to_spi_device(lmk->dev);
+	const struct lmk04832_device_info *info;
+	unsigned long mhz = rate / 1000000;
+
+	info = &lmk04832_device_info[spi_get_device_id(spi)->driver_data];
+
+	if (mhz >= info->vco0_range[0] && mhz <= info->vco0_range[1]) {
+		return LMK04832_VAL_VCO_MUX_VCO0;
+	} else if (mhz >= info->vco1_range[0] && mhz <= info->vco1_range[1]) {
+		return LMK04832_VAL_VCO_MUX_VCO1;
+	} else {
+		dev_err(lmk->dev, "%lu Hz is out of VCO ranges\n", rate);
+		return -ERANGE;
+	}
+}
+
+/**
+ * lmk04832_calc_pll2_params - Get PLL2 parameters used to set the VCO frequency
+ *
+ * @prate: parent rate to the PLL2, usually OSCin
+ * @rate:  Desired output rate for the VCO
+ * @n:     reference to PLL2_N
+ * @p:     reference to PLL2_P
+ * @r:     reference to PLL2_R
+ *
+ * This functions assumes LMK04832_BIT_PLL2_MISC_REF_2X_EN is set since it is
+ * recommended in the datasheet because a higher phase detector frequencies
+ * makes the design of wider loop bandwidth filters possible.
+ *
+ * the VCO rate can be calculated using the following expression:
+ *
+ *	VCO = OSCin * 2 * PLL2_N * PLL2_P / PLL2_R
+ *
+ * Returns vco rate or negative errno.
+ */
+static long lmk04832_calc_pll2_params(unsigned long prate, unsigned long rate,
+				      unsigned int *n, unsigned int *p,
+				      unsigned int *r)
+{
+	unsigned int pll2_n, pll2_p, pll2_r;
+	unsigned long num, div;
+
+	/* Set PLL2_P to a fixed value to simplify optimizations */
+	pll2_p = 2;
+
+	div = gcd(rate, prate);
+
+	num = DIV_ROUND_CLOSEST(rate, div);
+	pll2_r = DIV_ROUND_CLOSEST(prate, div);
+
+	if (num > 4) {
+		pll2_n = num >> 2;
+	} else {
+		pll2_r = pll2_r << 2;
+		pll2_n = num;
+	}
+
+	if (pll2_n < 1 || pll2_n > 0x03ffff)
+		return -EINVAL;
+	if (pll2_r < 1 || pll2_r > 0xfff)
+		return -EINVAL;
+
+	*n = pll2_n;
+	*p = pll2_p;
+	*r = pll2_r;
+
+	return DIV_ROUND_CLOSEST(prate * 2 * pll2_p * pll2_n, pll2_r);
+}
+
+static long lmk04832_vco_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+	unsigned int n, p, r;
+	long vco_rate;
+	int ret;
+
+	ret = lmk04832_check_vco_ranges(lmk, rate);
+	if (rate < 0)
+		return ret;
+
+	vco_rate = lmk04832_calc_pll2_params(*prate, rate, &n, &p, &r);
+	if (vco_rate < 0) {
+		dev_err(lmk->dev, "PLL2 parmeters out of range\n");
+		return vco_rate;
+	}
+
+	if (rate != vco_rate)
+		return -EINVAL;
+
+	return vco_rate;
+};
+
+static int lmk04832_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
+	unsigned int n, p, r;
+	long vco_rate;
+	int vco_mux;
+	int ret;
+
+	vco_mux = lmk04832_check_vco_ranges(lmk, rate);
+	if (vco_mux < 0)
+		return vco_mux;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_VCO_OSCOUT,
+				 LMK04832_BIT_VCO_MUX,
+				 FIELD_PREP(LMK04832_BIT_VCO_MUX, vco_mux));
+	if (ret)
+		return ret;
+
+	vco_rate = lmk04832_calc_pll2_params(prate, rate, &n, &p, &r);
+	if (vco_rate < 0) {
+		dev_err(lmk->dev, "failed to determine PLL2 parmeters\n");
+		return vco_rate;
+	}
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_R_MSB,
+				 LMK04832_BIT_PLL2_R_MSB,
+				 FIELD_GET(0x000700, r));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_R_LSB,
+			   FIELD_GET(0x0000ff, r));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_MISC,
+				 LMK04832_BIT_PLL2_MISC_P,
+				 FIELD_PREP(LMK04832_BIT_PLL2_MISC_P, p));
+	if (ret)
+		return ret;
+
+	/*
+	 * PLL2_N registers must be programmed after other PLL2 dividers are
+	 * programed to ensure proper VCO frequency calibration
+	 */
+	ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_0,
+			   FIELD_GET(0x030000, n));
+	if (ret)
+		return ret;
+	ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_1,
+			   FIELD_GET(0x00ff00, n));
+	if (ret)
+		return ret;
+
+	return regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_2,
+			    FIELD_GET(0x0000ff, n));
+};
+
+static const struct clk_ops lmk04832_vco_ops = {
+	.is_enabled = lmk04832_vco_is_enabled,
+	.prepare = lmk04832_vco_prepare,
+	.unprepare = lmk04832_vco_unprepare,
+	.recalc_rate = lmk04832_vco_recalc_rate,
+	.round_rate = lmk04832_vco_round_rate,
+	.set_rate = lmk04832_vco_set_rate,
+};
+
+/*
+ * lmk04832_register_vco - Initialize the internal VCO and clock distribution
+ *                         path in PLL2 single loop mode.
+ */
+static int lmk04832_register_vco(struct lmk04832 *lmk)
+{
+	const char *parent_names[1];
+	struct clk_init_data init;
+	int ret;
+
+	init.name = "lmk-vco";
+	parent_names[0] = __clk_get_name(lmk->oscin);
+	init.parent_names = parent_names;
+
+	init.ops = &lmk04832_vco_ops;
+	init.num_parents = 1;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_VCO_OSCOUT,
+				 LMK04832_BIT_VCO_MUX,
+				 FIELD_PREP(LMK04832_BIT_VCO_MUX,
+					    LMK04832_VAL_VCO_MUX_VCO1));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_FB_CTRL,
+				 LMK04832_BIT_PLL2_RCLK_MUX |
+				 LMK04832_BIT_PLL2_NCLK_MUX,
+				 FIELD_PREP(LMK04832_BIT_PLL2_RCLK_MUX,
+					    LMK04832_VAL_PLL2_RCLK_MUX_OSCIN)|
+				 FIELD_PREP(LMK04832_BIT_PLL2_NCLK_MUX,
+					    LMK04832_VAL_PLL2_NCLK_MUX_PLL2_P));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_MISC,
+				 LMK04832_BIT_PLL2_MISC_REF_2X_EN,
+				 LMK04832_BIT_PLL2_MISC_REF_2X_EN);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_LD,
+			   FIELD_PREP(LMK04832_BIT_PLL2_LD_MUX,
+				      LMK04832_VAL_PLL2_LD_MUX_PLL2_DLD) |
+			   FIELD_PREP(LMK04832_BIT_PLL2_LD_TYPE,
+				      LMK04832_VAL_PLL2_LD_TYPE_OUT_PP));
+	if (ret)
+		return ret;
+
+	lmk->vco.init = &init;
+	return devm_clk_hw_register(lmk->dev, &lmk->vco);
+}
+
+static int lmk04832_sclk_is_enabled(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+	unsigned int tmp;
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_MAIN_PD, &tmp);
+	if (ret)
+		return ret;
+
+	return FIELD_GET(LMK04832_BIT_SYSREF_PD, tmp);
+}
+
+static int lmk04832_sclk_prepare(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+
+	return regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+				  LMK04832_BIT_SYSREF_PD, 0x00);
+}
+
+static void lmk04832_sclk_unprepare(struct clk_hw *hw)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+
+	regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+			   LMK04832_BIT_SYSREF_PD, LMK04832_BIT_SYSREF_PD);
+}
+
+static unsigned long lmk04832_sclk_recalc_rate(struct clk_hw *hw,
+					       unsigned long prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+	unsigned int sysref_div;
+	u8 tmp[2];
+	int ret;
+
+	ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_SYSREF_DIV_MSB, &tmp, 2);
+	if (ret)
+		return ret;
+
+	sysref_div = FIELD_GET(LMK04832_BIT_SYSREF_DIV_MSB, tmp[0]) << 8 |
+		tmp[1];
+
+	return DIV_ROUND_CLOSEST(prate, sysref_div);
+}
+
+static long lmk04832_sclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+	unsigned long sclk_rate;
+	unsigned int sysref_div;
+
+	sysref_div = DIV_ROUND_CLOSEST(*prate, rate);
+	sclk_rate = DIV_ROUND_CLOSEST(*prate, sysref_div);
+
+	if (sysref_div < 0x07 || sysref_div > 0x1fff) {
+		dev_err(lmk->dev, "SYSREF divider out of range\n");
+		return -EINVAL;
+	}
+
+	if (rate != sclk_rate)
+		return -EINVAL;
+
+	return sclk_rate;
+}
+
+static int lmk04832_sclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long prate)
+{
+	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
+	unsigned int sysref_div;
+	int ret;
+
+	sysref_div = DIV_ROUND_CLOSEST(prate, rate);
+
+	if (sysref_div < 0x07 || sysref_div > 0x1fff) {
+		dev_err(lmk->dev, "SYSREF divider out of range\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_MSB,
+			   FIELD_GET(0x1f00, sysref_div));
+	if (ret)
+		return ret;
+
+	return regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_LSB,
+			    FIELD_GET(0x00ff, sysref_div));
+}
+
+static const struct clk_ops lmk04832_sclk_ops = {
+	.is_enabled = lmk04832_sclk_is_enabled,
+	.prepare = lmk04832_sclk_prepare,
+	.unprepare = lmk04832_sclk_unprepare,
+	.recalc_rate = lmk04832_sclk_recalc_rate,
+	.round_rate = lmk04832_sclk_round_rate,
+	.set_rate = lmk04832_sclk_set_rate,
+};
+
+static int lmk04832_register_sclk(struct lmk04832 *lmk)
+{
+	const char *parent_names[1];
+	struct clk_init_data init;
+	int ret;
+
+	init.name = "lmk-sclk";
+	parent_names[0] = clk_hw_get_name(&lmk->vco);
+	init.parent_names = parent_names;
+
+	init.ops = &lmk04832_sclk_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.num_parents = 1;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
+				 LMK04832_BIT_SYSREF_MUX,
+				 FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
+					    LMK04832_VAL_SYSREF_MUX_CONTINUOUS));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+				 LMK04832_BIT_SYSREF_PLSR_PD,
+				 LMK04832_BIT_SYSREF_PLSR_PD);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+				 LMK04832_BIT_SYNC_EN, 0xff);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0xff);
+	if (ret)
+		return ret;
+
+	lmk->sclk.init = &init;
+	return devm_clk_hw_register(lmk->dev, &lmk->sclk);
+}
+
+static int lmk04832_dclk_is_enabled(struct clk_hw *hw)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+	unsigned int tmp;
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL3(dclk->id),
+			  &tmp);
+	if (ret)
+		return ret;
+
+	return !FIELD_GET(LMK04832_BIT_DCLKX_Y_PD, tmp);
+}
+
+static int lmk04832_dclk_prepare(struct clk_hw *hw)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+
+	return regmap_update_bits(lmk->regmap,
+				  LMK04832_REG_CLKOUT_CTRL3(dclk->id),
+				  LMK04832_BIT_DCLKX_Y_PD, 0x00);
+}
+
+static void lmk04832_dclk_unprepare(struct clk_hw *hw)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+
+	regmap_update_bits(lmk->regmap,
+			   LMK04832_REG_CLKOUT_CTRL3(dclk->id),
+			   LMK04832_BIT_DCLKX_Y_PD, 0xff);
+}
+
+static unsigned long lmk04832_dclk_recalc_rate(struct clk_hw *hw,
+					       unsigned long prate)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+	unsigned int dclk_div;
+	unsigned int lsb, msb;
+	unsigned long rate;
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(dclk->id),
+			  &lsb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(dclk->id),
+			  &msb);
+	if (ret)
+		return ret;
+
+	dclk_div = FIELD_GET(LMK04832_BIT_DCLK_DIV_MSB, msb) << 8 | lsb;
+	rate = DIV_ROUND_CLOSEST(prate, dclk_div);
+
+	return rate;
+};
+
+static long lmk04832_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+	unsigned long dclk_rate;
+	unsigned int dclk_div;
+
+	dclk_div = DIV_ROUND_CLOSEST(*prate, rate);
+	dclk_rate = DIV_ROUND_CLOSEST(*prate, dclk_div);
+
+	if (dclk_div < 1 || dclk_div > 0x3ff) {
+		dev_err(lmk->dev, "%s_div out of range\n", clk_hw_get_name(hw));
+		return -EINVAL;
+	}
+
+	if (rate != dclk_rate)
+		return -EINVAL;
+
+	return dclk_rate;
+};
+
+static int lmk04832_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long prate)
+{
+	struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
+	struct lmk04832 *lmk = dclk->lmk;
+	unsigned int dclk_div;
+	int ret;
+
+	dclk_div = DIV_ROUND_CLOSEST(prate, rate);
+
+	if (dclk_div > 0x3ff) {
+		dev_err(lmk->dev, "%s_div out of range\n", clk_hw_get_name(hw));
+		return -EINVAL;
+	}
+
+	/* Enable Duty Cycle Corretion */
+	if (dclk_div == 1) {
+		ret = regmap_update_bits(lmk->regmap,
+					 LMK04832_REG_CLKOUT_CTRL3(dclk->id),
+					 LMK04832_BIT_DCLKX_Y_DCC,
+					 FIELD_PREP(LMK04832_BIT_DCLKX_Y_DCC, 1));
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(dclk->id),
+			   FIELD_GET(0x0ff, dclk_div));
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(lmk->regmap,
+				  LMK04832_REG_CLKOUT_CTRL2(dclk->id),
+				  LMK04832_BIT_DCLK_DIV_MSB,
+				  FIELD_GET(0x300, dclk_div));
+};
+
+static const struct clk_ops lmk04832_dclk_ops = {
+	.is_enabled = lmk04832_dclk_is_enabled,
+	.prepare = lmk04832_dclk_prepare,
+	.unprepare = lmk04832_dclk_unprepare,
+	.recalc_rate = lmk04832_dclk_recalc_rate,
+	.round_rate = lmk04832_dclk_round_rate,
+	.set_rate = lmk04832_dclk_set_rate,
+};
+
+static int lmk04832_clkout_is_enabled(struct clk_hw *hw)
+{
+	struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
+	struct lmk04832 *lmk = clkout->lmk;
+	unsigned int clkoutx_y_pd;
+	unsigned int sclkx_y_pd;
+	unsigned int tmp;
+	u32 enabled;
+	int ret;
+	u8 fmt;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(clkout->id),
+			  &clkoutx_y_pd);
+	if (ret)
+		return ret;
+
+	enabled = !FIELD_GET(LMK04832_BIT_CLKOUTX_Y_PD, clkoutx_y_pd);
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
+			  &tmp);
+	if (ret)
+		return ret;
+
+	if (FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp)) {
+		ret = regmap_read(lmk->regmap,
+				  LMK04832_REG_CLKOUT_CTRL4(clkout->id),
+				  &sclkx_y_pd);
+		if (ret)
+			return ret;
+
+		enabled = enabled && !FIELD_GET(LMK04832_BIT_SCLK_PD, sclkx_y_pd);
+	}
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_FMT(clkout->id),
+			  &tmp);
+	if (ret)
+		return ret;
+
+	if (clkout->id % 2)
+		fmt = FIELD_GET(0xf0, tmp);
+	else
+		fmt = FIELD_GET(0x0f, tmp);
+
+	return enabled && !fmt;
+}
+
+static int lmk04832_clkout_prepare(struct clk_hw *hw)
+{
+	struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
+	struct lmk04832 *lmk = clkout->lmk;
+	unsigned int tmp;
+	int ret;
+
+	if (clkout->format == LMK04832_VAL_CLKOUT_FMT_POWERDOWN)
+		dev_err(lmk->dev, "prepared %s but format is powerdown\n",
+			clk_hw_get_name(hw));
+
+	ret = regmap_update_bits(lmk->regmap,
+				 LMK04832_REG_CLKOUT_CTRL2(clkout->id),
+				 LMK04832_BIT_CLKOUTX_Y_PD, 0x00);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
+			  &tmp);
+	if (ret)
+		return ret;
+
+	if (FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp)) {
+		ret = regmap_update_bits(lmk->regmap,
+					 LMK04832_REG_CLKOUT_CTRL4(clkout->id),
+					 LMK04832_BIT_SCLK_PD, 0x00);
+		if (ret)
+			return ret;
+	}
+
+	return regmap_update_bits(lmk->regmap,
+				  LMK04832_REG_CLKOUT_FMT(clkout->id),
+				  LMK04832_BIT_CLKOUT_FMT(clkout->id),
+				  clkout->format << 4 * (clkout->id % 2));
+}
+
+static void lmk04832_clkout_unprepare(struct clk_hw *hw)
+{
+	struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
+	struct lmk04832 *lmk = clkout->lmk;
+
+	regmap_update_bits(lmk->regmap, LMK04832_REG_CLKOUT_FMT(clkout->id),
+			   LMK04832_BIT_CLKOUT_FMT(clkout->id),
+			   0x00);
+}
+
+static int lmk04832_clkout_set_parent(struct clk_hw *hw, uint8_t index)
+{
+	struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
+	struct lmk04832 *lmk = clkout->lmk;
+
+	return regmap_update_bits(lmk->regmap,
+				  LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
+				  LMK04832_BIT_CLKOUT_SRC_MUX,
+				  FIELD_PREP(LMK04832_BIT_CLKOUT_SRC_MUX,
+					     index));
+}
+
+static uint8_t lmk04832_clkout_get_parent(struct clk_hw *hw)
+{
+	struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
+	struct lmk04832 *lmk = clkout->lmk;
+	unsigned int tmp;
+	int ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
+			  &tmp);
+	if (ret)
+		return ret;
+
+	return FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp);
+}
+
+static const struct clk_ops lmk04832_clkout_ops = {
+	.is_enabled = lmk04832_clkout_is_enabled,
+	.prepare = lmk04832_clkout_prepare,
+	.unprepare = lmk04832_clkout_unprepare,
+	.set_parent = lmk04832_clkout_set_parent,
+	.get_parent = lmk04832_clkout_get_parent,
+};
+
+static int lmk04832_register_clkout(struct lmk04832 *lmk, const int num)
+{
+	char name[] = "lmk-clkoutXX";
+	char dclk_name[] = "lmk-dclkXX_YY";
+	const char *parent_names[2];
+	struct clk_init_data init;
+	int dclk_num = num / 2;
+	int ret;
+
+	if (num % 2 == 0) {
+		sprintf(dclk_name, "lmk-dclk%02d_%02d", num, num + 1);
+		init.name = dclk_name;
+		parent_names[0] = clk_hw_get_name(&lmk->vco);
+		init.ops = &lmk04832_dclk_ops;
+		init.flags = CLK_SET_RATE_PARENT;
+		init.num_parents = 1;
+
+		lmk->dclk[dclk_num].id = num;
+		lmk->dclk[dclk_num].lmk = lmk;
+		lmk->dclk[dclk_num].hw.init = &init;
+
+		ret = devm_clk_hw_register(lmk->dev, &lmk->dclk[dclk_num].hw);
+		if (ret)
+			return ret;
+	} else {
+		sprintf(dclk_name, "lmk-dclk%02d_%02d", num - 1, num);
+	}
+
+	if (of_property_read_string_index(lmk->dev->of_node,
+					  "clock-output-names",
+					  num, &init.name)) {
+		sprintf(name, "lmk-clkout%02d", num);
+		init.name = name;
+	}
+
+	parent_names[0] = dclk_name;
+	parent_names[1] = clk_hw_get_name(&lmk->sclk);
+	init.parent_names = parent_names;
+	init.ops = &lmk04832_clkout_ops;
+	init.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT;
+	init.num_parents = ARRAY_SIZE(parent_names);
+
+	lmk->clkout[num].id = num;
+	lmk->clkout[num].lmk = lmk;
+	lmk->clkout[num].hw.init = &init;
+	lmk->clk_data->hws[num] = &lmk->clkout[num].hw;
+
+	/* Set initial parent */
+	regmap_update_bits(lmk->regmap,
+			   LMK04832_REG_CLKOUT_SRC_MUX(num),
+			   LMK04832_BIT_CLKOUT_SRC_MUX,
+			   FIELD_PREP(LMK04832_BIT_CLKOUT_SRC_MUX,
+				      lmk->clkout[num].sysref));
+
+	return devm_clk_hw_register(lmk->dev, &lmk->clkout[num].hw);
+}
+
+static int lmk04832_set_spi_rdbk(const struct lmk04832 *lmk, const int rdbk_pin)
+{
+	int reg;
+	int ret;
+
+	dev_info(lmk->dev, "setting up 4-wire mode\n");
+	ret = regmap_write(lmk->regmap, LMK04832_REG_RST3W,
+			   LMK04832_BIT_SPI_3WIRE_DIS);
+	if (ret)
+		return ret;
+
+	switch (rdbk_pin) {
+	case RDBK_CLKIN_SEL0:
+		reg = LMK04832_REG_CLKIN_SEL0;
+		break;
+	case RDBK_CLKIN_SEL1:
+		reg = LMK04832_REG_CLKIN_SEL1;
+		break;
+	case RDBK_RESET:
+		reg = LMK04832_REG_CLKIN_RST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_write(lmk->regmap, reg,
+			    FIELD_PREP(LMK04832_BIT_CLKIN_SEL_MUX,
+				       LMK04832_VAL_CLKIN_SEL_MUX_SPI_RDBK) |
+			    FIELD_PREP(LMK04832_BIT_CLKIN_SEL_TYPE,
+				       LMK04832_VAL_CLKIN_SEL_TYPE_OUT));
+}
+
+static int lmk04832_probe(struct spi_device *spi)
+{
+	const struct lmk04832_device_info *info;
+	int rdbk_pin = RDBK_CLKIN_SEL1;
+	struct device_node *child;
+	struct lmk04832 *lmk;
+	u8 tmp[3];
+	int ret;
+	int i;
+
+	info = &lmk04832_device_info[spi_get_device_id(spi)->driver_data];
+
+	lmk = devm_kzalloc(&spi->dev, sizeof(struct lmk04832), GFP_KERNEL);
+	if (!lmk)
+		return -ENOMEM;
+
+	lmk->dev = &spi->dev;
+
+	lmk->oscin = devm_clk_get(lmk->dev, "oscin");
+	if (IS_ERR(lmk->oscin)) {
+		dev_err(lmk->dev, "failed to get oscin clock\n");
+		return PTR_ERR(lmk->oscin);
+	}
+
+	ret = clk_prepare_enable(lmk->oscin);
+	if (ret)
+		return ret;
+
+	lmk->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+						  GPIOD_OUT_LOW);
+
+	lmk->dclk = devm_kcalloc(lmk->dev, info->num_channels >> 1,
+				 sizeof(struct lmk_dclk), GFP_KERNEL);
+	if (IS_ERR(lmk->dclk)) {
+		ret = PTR_ERR(lmk->dclk);
+		goto err_disable_oscin;
+	}
+
+	lmk->clkout = devm_kcalloc(lmk->dev, info->num_channels,
+				   sizeof(*lmk->clkout), GFP_KERNEL);
+	if (IS_ERR(lmk->clkout)) {
+		ret = PTR_ERR(lmk->clkout);
+		goto err_disable_oscin;
+	}
+
+	lmk->clk_data = devm_kzalloc(lmk->dev, struct_size(lmk->clk_data, hws,
+							   info->num_channels),
+				     GFP_KERNEL);
+	if (IS_ERR(lmk->clk_data)) {
+		ret = PTR_ERR(lmk->clk_data);
+		goto err_disable_oscin;
+	}
+
+	device_property_read_u32(lmk->dev, "ti,vco-hz", &lmk->vco_rate);
+
+	for_each_child_of_node(lmk->dev->of_node, child) {
+		int reg;
+
+		ret = of_property_read_u32(child, "reg", &reg);
+		if (ret) {
+			dev_err(lmk->dev, "missing reg property in child: %s\n",
+				child->full_name);
+			of_node_put(child);
+			goto err_disable_oscin;
+		}
+
+		of_property_read_u32(child, "ti,clkout-fmt",
+				     &lmk->clkout[reg].format);
+
+		if (lmk->clkout[reg].format >= 0x0a && reg % 2 == 0
+		    && reg != 8 && reg != 10)
+			dev_err(lmk->dev, "invalid format for clkout%02d\n",
+				reg);
+
+		lmk->clkout[reg].sysref =
+			of_property_read_bool(child, "ti,clkout-sysref");
+	}
+
+	lmk->regmap = devm_regmap_init_spi(spi, &regmap_config);
+	if (IS_ERR(lmk->regmap)) {
+		dev_err(lmk->dev, "%s: regmap allocation failed: %ld\n",
+
+			__func__, PTR_ERR(lmk->regmap));
+		ret = PTR_ERR(lmk->regmap);
+		goto err_disable_oscin;
+	}
+
+	regmap_write(lmk->regmap, LMK04832_REG_RST3W, LMK04832_BIT_RESET);
+
+	if (!(spi->mode & SPI_3WIRE)) {
+		device_property_read_u32(lmk->dev, "ti,spi-4wire-rdbk",
+					 &rdbk_pin);
+		ret = lmk04832_set_spi_rdbk(lmk, rdbk_pin);
+		if (ret)
+			goto err_disable_oscin;
+	}
+
+	regmap_bulk_read(lmk->regmap, LMK04832_REG_ID_PROD_MSB, &tmp, 3);
+	if ((tmp[0] << 8 | tmp[1]) != info->pid || tmp[2] != info->maskrev) {
+		dev_err(lmk->dev, "unsupported device type: pid 0x%04x, maskrev 0x%02x\n",
+			tmp[0] << 8 | tmp[1], tmp[2]);
+		ret = -EINVAL;
+		goto err_disable_oscin;
+	}
+
+	ret = lmk04832_register_vco(lmk);
+	if (ret) {
+		dev_err(lmk->dev, "failed to init device clock path\n");
+		goto err_disable_oscin;
+	}
+
+	if (lmk->vco_rate) {
+		dev_info(lmk->dev, "setting VCO rate to %u Hz\n", lmk->vco_rate);
+		ret = clk_set_rate(lmk->vco.clk, lmk->vco_rate);
+		if (ret) {
+			dev_err(lmk->dev, "failed to set VCO rate\n");
+			goto err_disable_vco;
+		}
+	}
+
+	ret = lmk04832_register_sclk(lmk);
+	if (ret) {
+		dev_err(lmk->dev, "failed to init SYNC/SYSREF clock path\n");
+		goto err_disable_vco;
+	}
+
+	for (i = 0; i < info->num_channels; i++) {
+		ret = lmk04832_register_clkout(lmk, i);
+		if (ret) {
+			dev_err(lmk->dev, "failed to register clk %d\n", i);
+			goto err_disable_vco;
+		}
+	}
+
+	lmk->clk_data->num = info->num_channels;
+	ret = of_clk_add_hw_provider(lmk->dev->of_node, of_clk_hw_onecell_get,
+				     lmk->clk_data);
+	if (ret) {
+		dev_err(lmk->dev, "failed to add provider (%d)\n", ret);
+		goto err_disable_vco;
+	}
+
+	spi_set_drvdata(spi, lmk);
+
+	return 0;
+
+err_disable_vco:
+	clk_disable_unprepare(lmk->vco.clk);
+
+err_disable_oscin:
+	clk_disable_unprepare(lmk->oscin);
+
+	return ret;
+}
+
+static int lmk04832_remove(struct spi_device *spi)
+{
+	struct lmk04832 *lmk = spi_get_drvdata(spi);
+
+	clk_disable_unprepare(lmk->oscin);
+	of_clk_del_provider(spi->dev.of_node);
+
+	return 0;
+}
+static const struct spi_device_id lmk04832_id[] = {
+	{ "lmk04832", LMK04832 },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, lmk04832_id);
+
+static const struct of_device_id lmk04832_of_id[] = {
+	{ .compatible = "ti,lmk04832" },
+	{},
+};
+
+static struct spi_driver lmk04832_driver = {
+	.driver = {
+		.name	= "lmk04832",
+	},
+	.probe		= lmk04832_probe,
+	.remove		= lmk04832_remove,
+	.id_table	= lmk04832_id,
+};
+module_spi_driver(lmk04832_driver);
+
+MODULE_AUTHOR("Liam Beguin <lvb@xiphos.com>");
+MODULE_DESCRIPTION("Texas Instruments LMK04832");
+MODULE_LICENSE("GPL v2");
-- 
2.30.1.489.g328c10930387

Re: [PATCH v5 1/3] clk: add support for the lmk04832

[Stephen Boyd]

Quoting Liam Beguin (2021-04-22 17:40:55)
> From: Liam Beguin <lvb@xiphos.com>
> 
> The LMK04832 is an ultra-high performance clock conditioner with JEDEC
> JESD204B support and is also pin compatible with the LMK0482x family of
> devices.
> 
> Signed-off-by: Liam Beguin <lvb@xiphos.com>
> ---

Applied to clk-next

[PATCH v5 2/3] clk: lmk04832: add support for digital delay

[Liam Beguin]

From: Liam Beguin <lvb@xiphos.com>

The digital delay allows outputs to be delayed from 8 to 1023 VCO
cycles. The delay step can be as small as half the period of the clock
distribution path. For example, a 3.2-GHz VCO frequency results in
156.25-ps steps.  The digital delay value takes effect on the clock
output phase after a SYNC event.

This is required to support JESD204B subclass 1.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
 drivers/clk/clk-lmk04832.c | 321 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 315 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/clk-lmk04832.c b/drivers/clk/clk-lmk04832.c
index 48eb4817112b..0ad61b411923 100644
--- a/drivers/clk/clk-lmk04832.c
+++ b/drivers/clk/clk-lmk04832.c
@@ -36,16 +36,24 @@
 #define LMK04832_REG_CLKOUT_CTRL0(ch)	(0x100 + (ch >> 1) * 8)
 #define LMK04832_BIT_DCLK_DIV_LSB		GENMASK(7, 0)
 #define LMK04832_REG_CLKOUT_CTRL1(ch)	(0x101 + (ch >> 1) * 8)
+#define LMK04832_BIT_DCLKX_Y_DDLY_LSB		GENMASK(7, 0)
 #define LMK04832_REG_CLKOUT_CTRL2(ch)	(0x102 + (ch >> 1) * 8)
 #define LMK04832_BIT_CLKOUTX_Y_PD		BIT(7)
+#define LMK04832_BIT_DCLKX_Y_DDLY_PD		BIT(4)
+#define LMK04832_BIT_DCLKX_Y_DDLY_MSB		GENMASK(3, 2)
 #define LMK04832_BIT_DCLK_DIV_MSB		GENMASK(1, 0)
 #define LMK04832_REG_CLKOUT_SRC_MUX(ch)	(0x103 + (ch % 2) + (ch >> 1) * 8)
 #define LMK04832_BIT_CLKOUT_SRC_MUX		BIT(5)
 #define LMK04832_REG_CLKOUT_CTRL3(ch)	(0x103 + (ch >> 1) * 8)
 #define LMK04832_BIT_DCLKX_Y_PD			BIT(4)
 #define LMK04832_BIT_DCLKX_Y_DCC		BIT(2)
+#define LMK04832_BIT_DCLKX_Y_HS			BIT(0)
 #define LMK04832_REG_CLKOUT_CTRL4(ch)	(0x104 + (ch >> 1) * 8)
 #define LMK04832_BIT_SCLK_PD			BIT(4)
+#define LMK04832_BIT_SCLKX_Y_DIS_MODE		GENMASK(3, 2)
+#define LMK04832_REG_SCLKX_Y_ADLY(ch)	(0x105 + (ch >> 1) * 8)
+#define LMK04832_REG_SCLKX_Y_DDLY(ch)	(0x106 + (ch >> 1) * 8)
+#define LMK04832_BIT_SCLKX_Y_DDLY		GENMASK(3, 0)
 #define LMK04832_REG_CLKOUT_FMT(ch)	(0x107 + (ch >> 1) * 8)
 #define LMK04832_BIT_CLKOUT_FMT(ch)		(ch % 2 ? 0xf0 : 0x0f)
 #define LMK04832_VAL_CLKOUT_FMT_POWERDOWN		0x00
@@ -72,11 +80,19 @@
 #define LMK04832_VAL_VCO_MUX_VCO1			0x01
 #define LMK04832_VAL_VCO_MUX_EXT			0x02
 #define LMK04832_REG_SYSREF_OUT		0x139
+#define LMK04832_BIT_SYSREF_REQ_EN		BIT(6)
 #define LMK04832_BIT_SYSREF_MUX			GENMASK(1, 0)
+#define LMK04832_VAL_SYSREF_MUX_NORMAL_SYNC		0x00
+#define LMK04832_VAL_SYSREF_MUX_RECLK			0x01
+#define LMK04832_VAL_SYSREF_MUX_PULSER			0x02
 #define LMK04832_VAL_SYSREF_MUX_CONTINUOUS		0x03
 #define LMK04832_REG_SYSREF_DIV_MSB	0x13a
 #define LMK04832_BIT_SYSREF_DIV_MSB		GENMASK(4, 0)
 #define LMK04832_REG_SYSREF_DIV_LSB	0x13b
+#define LMK04832_REG_SYSREF_DDLY_MSB	0x13c
+#define LMK04832_BIT_SYSREF_DDLY_MSB		GENMASK(4, 0)
+#define LMK04832_REG_SYSREF_DDLY_LSB	0x13d
+#define LMK04832_REG_SYSREF_PULSE_CNT	0x13e
 #define LMK04832_REG_FB_CTRL		0x13f
 #define LMK04832_BIT_PLL2_RCLK_MUX		BIT(7)
 #define LMK04832_VAL_PLL2_RCLK_MUX_OSCIN		0x00
@@ -95,7 +111,15 @@
 #define LMK04832_BIT_SYSREF_DDLY_PD		BIT(1)
 #define LMK04832_BIT_SYSREF_PLSR_PD		BIT(0)
 #define LMK04832_REG_SYNC		0x143
+#define LMK04832_BIT_SYNC_CLR			BIT(7)
+#define LMK04832_BIT_SYNC_1SHOT_EN		BIT(6)
+#define LMK04832_BIT_SYNC_POL			BIT(5)
 #define LMK04832_BIT_SYNC_EN			BIT(4)
+#define LMK04832_BIT_SYNC_MODE			GENMASK(1, 0)
+#define LMK04832_VAL_SYNC_MODE_OFF			0x00
+#define LMK04832_VAL_SYNC_MODE_ON			0x01
+#define LMK04832_VAL_SYNC_MODE_PULSER_PIN		0x02
+#define LMK04832_VAL_SYNC_MODE_PULSER_SPI		0x03
 #define LMK04832_REG_SYNC_DIS		0x144
 
 /* 0x146 - 0x14a CLKin Control */
@@ -127,6 +151,7 @@
 #define LMK04832_BIT_PLL2_N_0			GENMASK(1, 0)
 #define LMK04832_REG_PLL2_N_1		0x167
 #define LMK04832_REG_PLL2_N_2		0x168
+#define LMK04832_REG_PLL2_DLD_CNT_MSB	0x16a
 #define LMK04832_REG_PLL2_DLD_CNT_LSB	0x16b
 #define LMK04832_REG_PLL2_LD		0x16e
 #define LMK04832_BIT_PLL2_LD_MUX		GENMASK(7, 3)
@@ -203,6 +228,11 @@ struct lmk_clkout {
  *
  * @dev: reference to a struct device, linked to the spi_device
  * @regmap: struct regmap instance use to access the chip
+ * @sync_mode: operational mode for SYNC signal
+ * @sysref_mux: select SYSREF source
+ * @sysref_pulse_cnt: number of SYSREF pulses generated while not in continuous
+ *                    mode.
+ * @sysref_ddly: SYSREF digital delay value
  * @oscin: PLL2 input clock
  * @vco: reference to the internal VCO clock
  * @sclk: reference to the internal sysref clock (SCLK)
@@ -217,6 +247,11 @@ struct lmk04832 {
 	struct device *dev;
 	struct regmap *regmap;
 
+	unsigned int sync_mode;
+	unsigned int sysref_mux;
+	unsigned int sysref_pulse_cnt;
+	unsigned int sysref_ddly;
+
 	struct clk *oscin;
 	struct clk_hw vco;
 	struct clk_hw sclk;
@@ -613,6 +648,212 @@ static int lmk04832_register_vco(struct lmk04832 *lmk)
 	return devm_clk_hw_register(lmk->dev, &lmk->vco);
 }
 
+static int lmk04832_clkout_set_ddly(struct lmk04832 *lmk, int id)
+{
+	int dclk_div_adj[] = {0, 0, -2, -2, 0, 3, -1, 0};
+	unsigned int sclkx_y_ddly = 10;
+	unsigned int dclkx_y_ddly;
+	unsigned int dclkx_y_div;
+	unsigned int sysref_ddly;
+	unsigned int dclkx_y_hs;
+	unsigned int lsb, msb;
+	int ret;
+
+	ret = regmap_update_bits(lmk->regmap,
+				 LMK04832_REG_CLKOUT_CTRL2(id),
+				 LMK04832_BIT_DCLKX_Y_DDLY_PD,
+				 FIELD_PREP(LMK04832_BIT_DCLKX_Y_DDLY_PD, 0));
+	if (ret)
+		return ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_SYSREF_DDLY_LSB, &lsb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_SYSREF_DDLY_MSB, &msb);
+	if (ret)
+		return ret;
+
+	sysref_ddly = FIELD_GET(LMK04832_BIT_SYSREF_DDLY_MSB, msb) << 8 | lsb;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(id), &lsb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(id), &msb);
+	if (ret)
+		return ret;
+
+	dclkx_y_div = FIELD_GET(LMK04832_BIT_DCLK_DIV_MSB, msb) << 8 | lsb;
+
+	ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL3(id), &lsb);
+	if (ret)
+		return ret;
+
+	dclkx_y_hs = FIELD_GET(LMK04832_BIT_DCLKX_Y_HS, lsb);
+
+	dclkx_y_ddly = sysref_ddly + 1 -
+		dclk_div_adj[dclkx_y_div < 6 ?  dclkx_y_div : 7] -
+		dclkx_y_hs + sclkx_y_ddly;
+
+	if (dclkx_y_ddly < 7 || dclkx_y_ddly > 0x3fff) {
+		dev_err(lmk->dev, "DCLKX_Y_DDLY out of range (%d)\n",
+			dclkx_y_ddly);
+		return -EINVAL;
+	}
+
+	ret = regmap_write(lmk->regmap,
+			   LMK04832_REG_SCLKX_Y_DDLY(id),
+			   FIELD_GET(LMK04832_BIT_SCLKX_Y_DDLY, sclkx_y_ddly));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_CLKOUT_CTRL1(id),
+				FIELD_GET(0x00ff, dclkx_y_ddly));
+	if (ret)
+		return ret;
+
+	dev_dbg(lmk->dev, "clkout%02u: sysref_ddly=%u, dclkx_y_ddly=%u, "
+		"dclk_div_adj=%+d, dclkx_y_hs=%u, sclkx_y_ddly=%u\n",
+		id, sysref_ddly, dclkx_y_ddly,
+		dclk_div_adj[dclkx_y_div < 6 ? dclkx_y_div : 7],
+		dclkx_y_hs, sclkx_y_ddly);
+
+	return regmap_update_bits(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(id),
+				  LMK04832_BIT_DCLKX_Y_DDLY_MSB,
+				  FIELD_GET(0x0300, dclkx_y_ddly));
+}
+
+/** lmk04832_sclk_sync - Establish deterministic phase relationship between sclk
+ *                       and dclk
+ *
+ * @lmk: Reference to the lmk device
+ *
+ * The synchronization sequence:
+ * - in the datasheet https://www.ti.com/lit/ds/symlink/lmk04832.pdf, p.31
+ *   (8.3.3.1 How to enable SYSREF)
+ * - Ti forum: https://e2e.ti.com/support/clock-and-timing/f/48/t/970972
+ *
+ * Returns 0 or negative errno.
+ */
+static int lmk04832_sclk_sync_sequence(struct lmk04832 *lmk)
+{
+	int ret;
+	int i;
+
+	/* 1. (optional) mute all sysref_outputs during synchronization */
+	/* 2. Enable and write device clock digital delay to applicable clocks */
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+				 LMK04832_BIT_SYSREF_DDLY_PD,
+				 FIELD_PREP(LMK04832_BIT_SYSREF_DDLY_PD, 0));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < lmk->clk_data->num; i += 2) {
+		ret = lmk04832_clkout_set_ddly(lmk, i);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * 3. Configure SYNC_MODE to SYNC_PIN and SYSREF_MUX to Normal SYNC,
+	 *    and clear SYSREF_REQ_EN (see 6.)
+	 */
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
+				 LMK04832_BIT_SYSREF_REQ_EN |
+				 LMK04832_BIT_SYSREF_MUX,
+				 FIELD_PREP(LMK04832_BIT_SYSREF_REQ_EN, 0) |
+				 FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
+					    LMK04832_VAL_SYSREF_MUX_NORMAL_SYNC));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+				 LMK04832_BIT_SYNC_MODE,
+				 FIELD_PREP(LMK04832_BIT_SYNC_MODE,
+					    LMK04832_VAL_SYNC_MODE_ON));
+	if (ret)
+		return ret;
+
+	/* 4. Clear SYNXC_DISx or applicable clocks and clear SYNC_DISSYSREF */
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0x00);
+	if (ret)
+		return ret;
+
+	/*
+	 * 5. If SCLKX_Y_DDLY != 0, Set SYSREF_CLR=1 for at least 15 clock
+	 *    distribution path cycles (VCO cycles), then back to 0. In
+	 *    PLL2-only use case, this will be complete in less than one SPI
+	 *    transaction. If SYSREF local digital delay is not used, this step
+	 *    can be skipped.
+	 */
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+				 LMK04832_BIT_SYNC_CLR,
+				 FIELD_PREP(LMK04832_BIT_SYNC_CLR, 0x01));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+				 LMK04832_BIT_SYNC_CLR,
+				 FIELD_PREP(LMK04832_BIT_SYNC_CLR, 0x00));
+	if (ret)
+		return ret;
+
+	/*
+	 * 6. Toggle SYNC_POL state between inverted and not inverted.
+	 *    If you use an external signal on the SYNC pin instead of toggling
+	 *    SYNC_POL, make sure that SYSREF_REQ_EN=0 so that the SYSREF_MUX
+	 *    does not shift into continuous SYSREF mode.
+	 */
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+			   LMK04832_BIT_SYNC_POL,
+			   FIELD_PREP(LMK04832_BIT_SYNC_POL, 0x01));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+			   LMK04832_BIT_SYNC_POL,
+			   FIELD_PREP(LMK04832_BIT_SYNC_POL, 0x00));
+	if (ret)
+		return ret;
+
+	/* 7. Set all SYNC_DISx=1, including SYNC_DISSYSREF */
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0xff);
+	if (ret)
+		return ret;
+
+	/* 8. Restore state of SYNC_MODE and SYSREF_MUX to desired values */
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
+				 LMK04832_BIT_SYSREF_MUX,
+				 FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
+					    lmk->sysref_mux));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
+				 LMK04832_BIT_SYNC_MODE,
+				 FIELD_PREP(LMK04832_BIT_SYNC_MODE,
+					    lmk->sync_mode));
+	if (ret)
+		return ret;
+
+	/*
+	 * 9. (optional) if SCLKx_y_DIS_MODE was used to mute SYSREF outputs
+	 *    during the SYNC event, restore SCLKx_y_DIS_MODE=0 for active state,
+	 *    or set SYSREF_GBL_PD=0 if SCLKx_y_DIS_MODE is set to a conditional
+	 *    option.
+	 */
+
+	/*
+	 * 10. (optional) To reduce power consumption, after the synchronization
+	 *     event is complete, DCLKx_y_DDLY_PD=1 and SYSREF_DDLY_PD=1 disable the
+	 *     digital delay counters (which are only used immediately after the
+	 *     SYNC pulse to delay the output by some number of VCO counts).
+	 */
+
+	return ret;
+}
+
 static int lmk04832_sclk_is_enabled(struct clk_hw *hw)
 {
 	struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
@@ -700,8 +941,16 @@ static int lmk04832_sclk_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (ret)
 		return ret;
 
-	return regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_LSB,
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_LSB,
 			    FIELD_GET(0x00ff, sysref_div));
+	if (ret)
+		return ret;
+
+	ret = lmk04832_sclk_sync_sequence(lmk);
+	if (ret)
+		dev_err(lmk->dev, "SYNC sequence failed\n");
+
+	return ret;
 }
 
 static const struct clk_ops lmk04832_sclk_ops = {
@@ -730,18 +979,37 @@ static int lmk04832_register_sclk(struct lmk04832 *lmk)
 	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
 				 LMK04832_BIT_SYSREF_MUX,
 				 FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
-					    LMK04832_VAL_SYSREF_MUX_CONTINUOUS));
+					    lmk->sysref_mux));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DDLY_LSB,
+			   FIELD_GET(0x00ff, lmk->sysref_ddly));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DDLY_MSB,
+			   FIELD_GET(0x1f00, lmk->sysref_ddly));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_PULSE_CNT,
+			   ilog2(lmk->sysref_pulse_cnt));
 	if (ret)
 		return ret;
 
 	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
+				 LMK04832_BIT_SYSREF_DDLY_PD |
 				 LMK04832_BIT_SYSREF_PLSR_PD,
-				 LMK04832_BIT_SYSREF_PLSR_PD);
+				 FIELD_PREP(LMK04832_BIT_SYSREF_DDLY_PD, 0) |
+				 FIELD_PREP(LMK04832_BIT_SYSREF_PLSR_PD, 0));
 	if (ret)
 		return ret;
 
-	ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
-				 LMK04832_BIT_SYNC_EN, 0xff);
+	ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC,
+			   FIELD_PREP(LMK04832_BIT_SYNC_POL, 0) |
+			   FIELD_PREP(LMK04832_BIT_SYNC_EN, 1) |
+			   FIELD_PREP(LMK04832_BIT_SYNC_MODE, lmk->sync_mode));
 	if (ret)
 		return ret;
 
@@ -861,15 +1129,41 @@ static int lmk04832_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
 			return ret;
 	}
 
+	/*
+	 * While using Divide-by-2 or Divide-by-3 for DCLK_X_Y_DIV, SYNC
+	 * procedure requires to first program Divide-by-4 and then back to
+	 * Divide-by-2 or Divide-by-3 before doing SYNC.
+	 */
+	if (dclk_div == 2 || dclk_div == 3) {
+		ret = regmap_update_bits(lmk->regmap,
+					 LMK04832_REG_CLKOUT_CTRL2(dclk->id),
+					 LMK04832_BIT_DCLK_DIV_MSB, 0x00);
+		if (ret)
+			return ret;
+
+		ret = regmap_write(lmk->regmap,
+				   LMK04832_REG_CLKOUT_CTRL0(dclk->id), 0x04);
+		if (ret)
+			return ret;
+	}
+
 	ret = regmap_write(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(dclk->id),
 			   FIELD_GET(0x0ff, dclk_div));
 	if (ret)
 		return ret;
 
-	return regmap_update_bits(lmk->regmap,
+	ret = regmap_update_bits(lmk->regmap,
 				  LMK04832_REG_CLKOUT_CTRL2(dclk->id),
 				  LMK04832_BIT_DCLK_DIV_MSB,
 				  FIELD_GET(0x300, dclk_div));
+	if (ret)
+		return ret;
+
+	ret = lmk04832_sclk_sync_sequence(lmk);
+	if (ret)
+		dev_err(lmk->dev, "SYNC sequence failed\n");
+
+	return ret;
 };
 
 static const struct clk_ops lmk04832_dclk_ops = {
@@ -1152,6 +1446,21 @@ static int lmk04832_probe(struct spi_device *spi)
 
 	device_property_read_u32(lmk->dev, "ti,vco-hz", &lmk->vco_rate);
 
+	lmk->sysref_ddly = 8;
+	device_property_read_u32(lmk->dev, "ti,sysref-ddly", &lmk->sysref_ddly);
+
+	lmk->sysref_mux = LMK04832_VAL_SYSREF_MUX_CONTINUOUS;
+	device_property_read_u32(lmk->dev, "ti,sysref-mux",
+				 &lmk->sysref_mux);
+
+	lmk->sync_mode = LMK04832_VAL_SYNC_MODE_OFF;
+	device_property_read_u32(lmk->dev, "ti,sync-mode",
+				 &lmk->sync_mode);
+
+	lmk->sysref_pulse_cnt = 4;
+	device_property_read_u32(lmk->dev, "ti,sysref-pulse-count",
+				 &lmk->sysref_pulse_cnt);
+
 	for_each_child_of_node(lmk->dev->of_node, child) {
 		int reg;
 
-- 
2.30.1.489.g328c10930387

Re: [PATCH v5 2/3] clk: lmk04832: add support for digital delay

[Stephen Boyd]

Quoting Liam Beguin (2021-04-22 17:40:56)
> From: Liam Beguin <lvb@xiphos.com>
> 
> The digital delay allows outputs to be delayed from 8 to 1023 VCO
> cycles. The delay step can be as small as half the period of the clock
> distribution path. For example, a 3.2-GHz VCO frequency results in
> 156.25-ps steps.  The digital delay value takes effect on the clock
> output phase after a SYNC event.
> 
> This is required to support JESD204B subclass 1.
> 
> Signed-off-by: Liam Beguin <lvb@xiphos.com>
> ---

Applied to clk-next

[PATCH v5 3/3] dt-bindings: clock: add ti,lmk04832 bindings

[Liam Beguin]

From: Liam Beguin <lvb@xiphos.com>

Document devicetree bindings for Texas Instruments' LMK04832.
The LMK04208 is a high performance clock conditioner with superior clock
jitter cleaning, generation, and distribution with JEDEC JESD204B
support.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
 .../bindings/clock/ti,lmk04832.yaml           | 209 ++++++++++++++++++
 1 file changed, 209 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,lmk04832.yaml

diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
new file mode 100644
index 000000000000..bd8173848253
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for the Texas Instruments LMK04832
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B
+  support. The LMK04832 is pin compatible with the LMK0482x family.
+
+  Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmk04832
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  clocks:
+    items:
+      - description: PLL2 reference clock.
+
+  clock-names:
+    items:
+      - const: oscin
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,spi-4wire-rdbk:
+    description: |
+      Select SPI 4wire readback pin configuration.
+      Available readback pins are,
+        CLKin_SEL0 0
+        CLKin_SEL1 1
+        RESET 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,vco-hz:
+    description: Optional to set VCO frequency of the PLL in Hertz.
+
+  ti,sysref-ddly:
+    description: SYSREF digital delay value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 8191
+    default: 8
+
+  ti,sysref-mux:
+    description: |
+      SYSREF Mux configuration.
+      Available options are,
+        Normal SYNC 0
+        Re-clocked 1
+        SYSREF Pulser 2
+        SYSREF Continuous 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 3
+
+  ti,sync-mode:
+    description: SYNC pin configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,sysref-pulse-count:
+    description:
+      Number of SYSREF pulses to send when SYSREF is not in continuous mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+    default: 4
+
+patternProperties:
+  "@[0-9a-d]+$":
+    type: object
+    description:
+      Child nodes used to configure output clocks.
+
+    properties:
+      reg:
+        description:
+          clock output identifier.
+        minimum: 0
+        maximum: 13
+
+      ti,clkout-fmt:
+        description:
+          Clock output format.
+          Available options are,
+            Powerdown 0x00
+            LVDS 0x01
+            HSDS 6 mA 0x02
+            HSDS 8 mA 0x03
+            LVPECL 1600 mV 0x04
+            LVPECL 2000 mV 0x05
+            LCPECL 0x06
+            CML 16 mA 0x07
+            CML 24 mA 0x08
+            CML 32 mA 0x09
+            CMOS (Off/Inverted) 0x0a
+            CMOS (Normal/Off) 0x0b
+            CMOS (Inverted/Inverted) 0x0c
+            CMOS (Inverted/Normal) 0x0d
+            CMOS (Normal/Inverted) 0x0e
+            CMOS (Normal/Normal) 0x0f
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      ti,clkout-sysref:
+        description:
+          Select SYSREF clock path for output clock.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clocks {
+        lmk04832_oscin: oscin {
+            compatible = "fixed-clock";
+
+            #clock-cells = <0>;
+            clock-frequency = <122880000>;
+            clock-output-names = "lmk04832-oscin";
+        };
+    };
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lmk04832: clock-controller@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+
+            compatible = "ti,lmk04832";
+            spi-max-frequency = <781250>;
+
+            reset-gpios = <&gpio_lmk 0 0 0>;
+
+            #clock-cells = <1>;
+            clocks = <&lmk04832_oscin>;
+            clock-names = "oscin";
+
+            ti,spi-4wire-rdbk = <0>;
+            ti,vco-hz = <2457600000>;
+
+            assigned-clocks =
+                <&lmk04832 0>, <&lmk04832 1>,
+                <&lmk04832 2>, <&lmk04832 3>,
+                <&lmk04832 4>,
+                <&lmk04832 6>, <&lmk04832 7>,
+                <&lmk04832 10>, <&lmk04832 11>;
+            assigned-clock-rates =
+                <122880000>, <384000>,
+                <122880000>, <384000>,
+                <122880000>,
+                <153600000>, <384000>,
+                <614400000>, <384000>;
+
+            clkout0@0 {
+                reg = <0>;
+                ti,clkout-fmt = <0x01>; // LVDS
+            };
+
+            clkout1@1 {
+                reg = <1>;
+                ti,clkout-fmt = <0x01>; // LVDS
+                ti,clkout-sysref;
+            };
+        };
+    };
-- 
2.30.1.489.g328c10930387

Re: [PATCH v5 3/3] dt-bindings: clock: add ti,lmk04832 bindings

[Rob Herring]

On Thu, 22 Apr 2021 20:40:57 -0400, Liam Beguin wrote:
> From: Liam Beguin <lvb@xiphos.com>
> 
> Document devicetree bindings for Texas Instruments' LMK04832.
> The LMK04208 is a high performance clock conditioner with superior clock
> jitter cleaning, generation, and distribution with JEDEC JESD204B
> support.
> 
> Signed-off-by: Liam Beguin <lvb@xiphos.com>
> ---
>  .../bindings/clock/ti,lmk04832.yaml           | 209 ++++++++++++++++++
>  1 file changed, 209 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v5 3/3] dt-bindings: clock: add ti,lmk04832 bindings

[Stephen Boyd]

Quoting Liam Beguin (2021-04-22 17:40:57)
> From: Liam Beguin <lvb@xiphos.com>
> 
> Document devicetree bindings for Texas Instruments' LMK04832.
> The LMK04208 is a high performance clock conditioner with superior clock
> jitter cleaning, generation, and distribution with JEDEC JESD204B
> support.
> 
> Signed-off-by: Liam Beguin <lvb@xiphos.com>
> ---

Applied to clk-next

Re: [PATCH v5 0/3] add support for the lmk04832

[Liam Beguin]

On Thu Apr 22, 2021 at 8:40 PM EDT, Liam Beguin wrote:
> From: Liam Beguin <lvb@xiphos.com>
>
> Hi,
>
> The LMK04832 is an ultra-high performance clock conditioner with JEDEC
> JESD204B support and is also pin compatible with the LMK0482x family of
> devices.
>
> This driver adds initial support to configure the LMK04832 clocks using
> the clock framework.
>
> This has been tested on a system using JESD204B subclass 1.
>
> At the moment, the VCO rate has to be set manually from the devicetree
> and a dclk (or sclk) rate change isn't propagated to the VCO
> automatically.
>
> Changes since v1:
> - add yaml devicetree documentation,
> - add links to datasheet,
> - use {u8,u16,u32} instead of Uint_ variants,
> - drop redundant debugfs code,
> - use a pointer to device_info instead of struct copy,
> - add of_device_id table,
> - add support for SYSREF digital delay and JESD204B subclass 1
>
> Changes since v2:
> - fix dt-bindings documentation, apologies for the broken build
> - fix property vendor prefixes
> - split dt-bindings into a separate patch
>
> Changes since v3:
> - add missing properties in dt-bindings
>
> Changes since v3:
> - address coccicheck comments
> - update dt-bindings
>

Hi Stephen,

Did you get a chance to have another look at this?

Thanks,
Liam

>
> Thanks for your time,
> Liam
>
> Liam Beguin (3):
> clk: add support for the lmk04832
> clk: lmk04832: add support for digital delay
> dt-bindings: clock: add ti,lmk04832 bindings
>
> .../bindings/clock/ti,lmk04832.yaml | 209 +++
> drivers/clk/Kconfig | 7 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-lmk04832.c | 1596 +++++++++++++++++
> 4 files changed, 1813 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
> create mode 100644 drivers/clk/clk-lmk04832.c
>
> Range-diff against v4:
> 1: cb6a8ea514d8 ! 1: 11461912b3c4 clk: add support for the lmk04832
> @@ drivers/clk/clk-lmk04832.c (new)
> + if (ret) {
> + dev_err(lmk->dev, "missing reg property in child: %s\n",
> + child->full_name);
> ++ of_node_put(child);
> + goto err_disable_oscin;
> + }
> +
> @@ drivers/clk/clk-lmk04832.c (new)
> +
> + lmk->clkout[reg].sysref =
> + of_property_read_bool(child, "ti,clkout-sysref");
> -+ };
> ++ }
> +
> + lmk->regmap = devm_regmap_init_spi(spi, &regmap_config);
> + if (IS_ERR(lmk->regmap)) {
> 2: 8464eac02aab = 2: 01b64b5af4ed clk: lmk04832: add support for digital
> delay
> 3: a2c4e8d53d1c ! 3: 96b514765de0 dt-bindings: clock: add ti,lmk04832
> bindings
> @@ Documentation/devicetree/bindings/clock/ti,lmk04832.yaml (new)
> + const: 1
> +
> + spi-max-frequency:
> -+ $ref: /schemas/types.yaml#/definitions/uint32
> -+ description:
> -+ Maximum SPI clocking speed of the device in Hz.
> ++ maximum: 5000000
> +
> + clocks:
> + items:
> @@ Documentation/devicetree/bindings/clock/ti,lmk04832.yaml (new)
> + required:
> + - reg
> +
> ++ additionalProperties: false
> ++
> +required:
> + - compatible
> + - reg
>
> base-commit: f40ddce88593482919761f74910f42f4b84c004b
> --
> 2.30.1.489.g328c10930387