From: Anshuman Khandual <anshuman.khandual@arm.com> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mm@kvack.org Cc: akpm@linux-foundation.org, suzuki.poulose@arm.com, mark.rutland@arm.com, will@kernel.org, catalin.marinas@arm.com, maz@kernel.org, james.morse@arm.com, steven.price@arm.com, Anshuman Khandual <anshuman.khandual@arm.com> Subject: [RFC V2 06/10] arm64/mm: Add FEAT_LPA2 specific encoding Date: Mon, 26 Jul 2021 12:07:21 +0530 [thread overview] Message-ID: <1627281445-12445-7-git-send-email-anshuman.khandual@arm.com> (raw) In-Reply-To: <1627281445-12445-1-git-send-email-anshuman.khandual@arm.com> FEAT_LPA2 requires different PTE representation formats for both 4K and 16K page size config. This adds FEAT_LPA2 specific new PTE encodings as per ARM ARM (0487G.A) which updates [pte|phys]_to_[phys|pte](). The updated helpers would be used when FEAT_LPA2 gets enabled via CONFIG_ARM64_PA_BITS_52 on 4K and 16K page size. Although TTBR encoding and phys_to_ttbr() helper remains the same as FEAT_LPA for FEAT_LPA2 as well. It updates 'phys_to_pte' helper to accept a temporary variable and changes impacted call sites. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> --- arch/arm64/include/asm/assembler.h | 14 +++++++++++--- arch/arm64/include/asm/pgtable-hwdef.h | 4 ++++ arch/arm64/include/asm/pgtable.h | 4 ++++ 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index fedc202..d7ce4cf 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -614,6 +614,10 @@ alternative_endif */ orr \pte, \phys, \phys, lsr #36 and \pte, \pte, #PTE_ADDR_MASK +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) + orr \pte, \phys, \phys, lsr #42 + and \pte, \pte, #PTE_ADDR_MASK | GENMASK(PAGE_SHIFT - 1, 10) + and \pte, \pte, #~GENMASK(PAGE_SHIFT - 1, 10) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ mov \pte, \phys #endif /* CONFIG_ARM64_PA_BITS_52_LPA */ @@ -621,9 +625,13 @@ alternative_endif .macro pte_to_phys, phys, pte #ifdef CONFIG_ARM64_PA_BITS_52_LPA - ubfiz \phys, \pte, #(48 - 16 - 12), #16 - bfxil \phys, \pte, #16, #32 - lsl \phys, \phys, #16 + ubfiz \phys, \pte, #(48 - PAGE_SHIFT - 12), #16 + bfxil \phys, \pte, #PAGE_SHIFT, #(48 - PAGE_SHIFT) + lsl \phys, \phys, #PAGE_SHIFT +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) + ubfiz \phys, \pte, #(52 - PAGE_SHIFT - 10), #10 + bfxil \phys, \pte, #PAGE_SHIFT, #(50 - PAGE_SHIFT) + lsl \phys, \phys, #PAGE_SHIFT #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ and \phys, \pte, #PTE_ADDR_MASK #endif /* CONFIG_ARM64_PA_BITS_52_LPA */ diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index f375bcf..c815a85 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -159,6 +159,10 @@ #define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) #define PTE_ADDR_HIGH (_AT(pteval_t, 0xf) << 12) #define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH) +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) +#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (50 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) +#define PTE_ADDR_HIGH (_AT(pteval_t, 0x3) << 8) +#define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ #define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) #define PTE_ADDR_MASK PTE_ADDR_LOW diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 3c57fb2..5e7e402 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -70,6 +70,10 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define __pte_to_phys(pte) \ ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36)) #define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK) +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) +#define __pte_to_phys(pte) \ + ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 42)) +#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 42)) & PTE_ADDR_MASK) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ #define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK) #define __phys_to_pte_val(phys) (phys) -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anshuman Khandual <anshuman.khandual@arm.com> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mm@kvack.org Cc: akpm@linux-foundation.org, suzuki.poulose@arm.com, mark.rutland@arm.com, will@kernel.org, catalin.marinas@arm.com, maz@kernel.org, james.morse@arm.com, steven.price@arm.com, Anshuman Khandual <anshuman.khandual@arm.com> Subject: [RFC V2 06/10] arm64/mm: Add FEAT_LPA2 specific encoding Date: Mon, 26 Jul 2021 12:07:21 +0530 [thread overview] Message-ID: <1627281445-12445-7-git-send-email-anshuman.khandual@arm.com> (raw) In-Reply-To: <1627281445-12445-1-git-send-email-anshuman.khandual@arm.com> FEAT_LPA2 requires different PTE representation formats for both 4K and 16K page size config. This adds FEAT_LPA2 specific new PTE encodings as per ARM ARM (0487G.A) which updates [pte|phys]_to_[phys|pte](). The updated helpers would be used when FEAT_LPA2 gets enabled via CONFIG_ARM64_PA_BITS_52 on 4K and 16K page size. Although TTBR encoding and phys_to_ttbr() helper remains the same as FEAT_LPA for FEAT_LPA2 as well. It updates 'phys_to_pte' helper to accept a temporary variable and changes impacted call sites. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> --- arch/arm64/include/asm/assembler.h | 14 +++++++++++--- arch/arm64/include/asm/pgtable-hwdef.h | 4 ++++ arch/arm64/include/asm/pgtable.h | 4 ++++ 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index fedc202..d7ce4cf 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -614,6 +614,10 @@ alternative_endif */ orr \pte, \phys, \phys, lsr #36 and \pte, \pte, #PTE_ADDR_MASK +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) + orr \pte, \phys, \phys, lsr #42 + and \pte, \pte, #PTE_ADDR_MASK | GENMASK(PAGE_SHIFT - 1, 10) + and \pte, \pte, #~GENMASK(PAGE_SHIFT - 1, 10) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ mov \pte, \phys #endif /* CONFIG_ARM64_PA_BITS_52_LPA */ @@ -621,9 +625,13 @@ alternative_endif .macro pte_to_phys, phys, pte #ifdef CONFIG_ARM64_PA_BITS_52_LPA - ubfiz \phys, \pte, #(48 - 16 - 12), #16 - bfxil \phys, \pte, #16, #32 - lsl \phys, \phys, #16 + ubfiz \phys, \pte, #(48 - PAGE_SHIFT - 12), #16 + bfxil \phys, \pte, #PAGE_SHIFT, #(48 - PAGE_SHIFT) + lsl \phys, \phys, #PAGE_SHIFT +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) + ubfiz \phys, \pte, #(52 - PAGE_SHIFT - 10), #10 + bfxil \phys, \pte, #PAGE_SHIFT, #(50 - PAGE_SHIFT) + lsl \phys, \phys, #PAGE_SHIFT #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ and \phys, \pte, #PTE_ADDR_MASK #endif /* CONFIG_ARM64_PA_BITS_52_LPA */ diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index f375bcf..c815a85 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -159,6 +159,10 @@ #define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) #define PTE_ADDR_HIGH (_AT(pteval_t, 0xf) << 12) #define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH) +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) +#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (50 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) +#define PTE_ADDR_HIGH (_AT(pteval_t, 0x3) << 8) +#define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ #define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT) #define PTE_ADDR_MASK PTE_ADDR_LOW diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 3c57fb2..5e7e402 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -70,6 +70,10 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define __pte_to_phys(pte) \ ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36)) #define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK) +#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2) +#define __pte_to_phys(pte) \ + ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 42)) +#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 42)) & PTE_ADDR_MASK) #else /* !CONFIG_ARM64_PA_BITS_52_LPA */ #define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK) #define __phys_to_pte_val(phys) (phys) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-26 6:37 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-26 6:37 [RFC V2 00/10] arm64/mm: Enable FEAT_LPA2 (52 bits PA support on 4K|16K pages) Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 01/10] mm/mmap: Dynamically initialize protection_map[] Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:03 ` Catalin Marinas 2021-08-05 17:03 ` Catalin Marinas 2021-08-12 9:15 ` Anshuman Khandual 2021-08-12 9:15 ` Anshuman Khandual 2021-08-13 7:16 ` Anshuman Khandual 2021-08-13 7:16 ` Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 02/10] arm64/mm: Consolidate TCR_EL1 fields Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:05 ` Catalin Marinas 2021-08-05 17:05 ` Catalin Marinas 2021-07-26 6:37 ` [RFC V2 03/10] arm64/mm: Add FEAT_LPA2 specific TCR_EL1.DS field Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:06 ` Catalin Marinas 2021-08-05 17:06 ` Catalin Marinas 2021-07-26 6:37 ` [RFC V2 04/10] arm64/mm: Add FEAT_LPA2 specific ID_AA64MMFR0.TGRAN[2] Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:06 ` Catalin Marinas 2021-08-05 17:06 ` Catalin Marinas 2021-07-26 6:37 ` [RFC V2 05/10] arm64/mm: Add CONFIG_ARM64_PA_BITS_52_[LPA|LPA2] Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:25 ` Catalin Marinas 2021-08-05 17:25 ` Catalin Marinas 2021-08-12 10:09 ` Anshuman Khandual 2021-08-12 10:09 ` Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual [this message] 2021-07-26 6:37 ` [RFC V2 06/10] arm64/mm: Add FEAT_LPA2 specific encoding Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 07/10] arm64/mm: Detect and enable FEAT_LPA2 Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 08/10] arm64/mm: Add FEAT_LPA2 specific PTE_SHARED and PMD_SECT_S Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 09/10] arm64/mm: Add FEAT_LPA2 specific fallback (48 bits PA) when not implemented Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-07-26 6:37 ` [RFC V2 10/10] arm64/mm: Enable CONFIG_ARM64_PA_BITS_52 on CONFIG_ARM64_[4K|16K]_PAGES Anshuman Khandual 2021-07-26 6:37 ` Anshuman Khandual 2021-08-05 17:23 ` Catalin Marinas 2021-08-05 17:23 ` Catalin Marinas 2021-08-12 9:13 ` Anshuman Khandual 2021-08-12 9:13 ` Anshuman Khandual
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1627281445-12445-7-git-send-email-anshuman.khandual@arm.com \ --to=anshuman.khandual@arm.com \ --cc=akpm@linux-foundation.org \ --cc=catalin.marinas@arm.com \ --cc=james.morse@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=mark.rutland@arm.com \ --cc=maz@kernel.org \ --cc=steven.price@arm.com \ --cc=suzuki.poulose@arm.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.