* [PATCH v2 0/5] clk: uniphier: Introduce some clock features and NX1 support @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi This series includes the patches to add audio/video clock control for PXs3, SoC-glue clock source selector for Pro4, and basic clock controls for new UniPhier NX1 SoC. NX1 SoC also has the same kinds of clock controls as the other UniPhier SoCs. --- Changes since v1: - Fix dt-bindings to replace spaces from "\t" Kunihiko Hayashi (5): clk: uniphier: Add audio system and video input clock control for PXs3 dt-bindings: clock: uniphier: Add NX1 clock binding clk: uniphier: Add NX1 clock support dt-bindings: clock: uniphier: Add clock binding for SoC-glue clk: uniphier: Add SoC-glue clock source selector support for Pro4 .../bindings/clock/socionext,uniphier-clock.yaml | 19 +++++++++ drivers/clk/uniphier/clk-uniphier-core.c | 17 ++++++++ drivers/clk/uniphier/clk-uniphier-sys.c | 47 ++++++++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 6 +++ 4 files changed, 89 insertions(+) -- 2.7.4 ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v2 0/5] clk: uniphier: Introduce some clock features and NX1 support @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi This series includes the patches to add audio/video clock control for PXs3, SoC-glue clock source selector for Pro4, and basic clock controls for new UniPhier NX1 SoC. NX1 SoC also has the same kinds of clock controls as the other UniPhier SoCs. --- Changes since v1: - Fix dt-bindings to replace spaces from "\t" Kunihiko Hayashi (5): clk: uniphier: Add audio system and video input clock control for PXs3 dt-bindings: clock: uniphier: Add NX1 clock binding clk: uniphier: Add NX1 clock support dt-bindings: clock: uniphier: Add clock binding for SoC-glue clk: uniphier: Add SoC-glue clock source selector support for Pro4 .../bindings/clock/socionext,uniphier-clock.yaml | 19 +++++++++ drivers/clk/uniphier/clk-uniphier-core.c | 17 ++++++++ drivers/clk/uniphier/clk-uniphier-sys.c | 47 ++++++++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 6 +++ 4 files changed, 89 insertions(+) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v2 1/5] clk: uniphier: Add audio system and video input clock control for PXs3 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 11:09 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add clocks for audio subsystem (AIO) and video input subsystem (EXIV) on UniPhier PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-sys.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index 32b301724183..0ec28ebc39c2 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -288,6 +288,8 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7), UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8), UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21), + UNIPHIER_LD11_SYS_CLK_AIO(40), + UNIPHIER_LD11_SYS_CLK_EXIV(42), /* CPU gears */ UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8), UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8), -- 2.7.4 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 1/5] clk: uniphier: Add audio system and video input clock control for PXs3 @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add clocks for audio subsystem (AIO) and video input subsystem (EXIV) on UniPhier PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-sys.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index 32b301724183..0ec28ebc39c2 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -288,6 +288,8 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7), UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8), UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21), + UNIPHIER_LD11_SYS_CLK_AIO(40), + UNIPHIER_LD11_SYS_CLK_EXIV(42), /* CPU gears */ UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8), UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8), -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 2/5] dt-bindings: clock: uniphier: Add NX1 clock binding 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 11:09 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Update clock binding document for UniPhier NX1 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml index c3930edc410f..ee8d16a8019e 100644 --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -23,6 +23,7 @@ properties: - socionext,uniphier-ld11-clock - socionext,uniphier-ld20-clock - socionext,uniphier-pxs3-clock + - socionext,uniphier-nx1-clock - description: Media I/O (MIO) clock, SD clock enum: - socionext,uniphier-ld4-mio-clock @@ -33,6 +34,7 @@ properties: - socionext,uniphier-ld11-mio-clock - socionext,uniphier-ld20-sd-clock - socionext,uniphier-pxs3-sd-clock + - socionext,uniphier-nx1-sd-clock - description: Peripheral clock enum: - socionext,uniphier-ld4-peri-clock @@ -43,6 +45,7 @@ properties: - socionext,uniphier-ld11-peri-clock - socionext,uniphier-ld20-peri-clock - socionext,uniphier-pxs3-peri-clock + - socionext,uniphier-nx1-peri-clock "#clock-cells": const: 1 -- 2.7.4 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 2/5] dt-bindings: clock: uniphier: Add NX1 clock binding @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Update clock binding document for UniPhier NX1 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml index c3930edc410f..ee8d16a8019e 100644 --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -23,6 +23,7 @@ properties: - socionext,uniphier-ld11-clock - socionext,uniphier-ld20-clock - socionext,uniphier-pxs3-clock + - socionext,uniphier-nx1-clock - description: Media I/O (MIO) clock, SD clock enum: - socionext,uniphier-ld4-mio-clock @@ -33,6 +34,7 @@ properties: - socionext,uniphier-ld11-mio-clock - socionext,uniphier-ld20-sd-clock - socionext,uniphier-pxs3-sd-clock + - socionext,uniphier-nx1-sd-clock - description: Peripheral clock enum: - socionext,uniphier-ld4-peri-clock @@ -43,6 +45,7 @@ properties: - socionext,uniphier-ld11-peri-clock - socionext,uniphier-ld20-peri-clock - socionext,uniphier-pxs3-peri-clock + - socionext,uniphier-nx1-peri-clock "#clock-cells": const: 1 -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 3/5] clk: uniphier: Add NX1 clock support 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 11:09 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add basic clock data for UniPhier NX1 SoC. This includes PLL and clock division data for cpufreq support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-core.c | 12 ++++++++++++ drivers/clk/uniphier/clk-uniphier-sys.c | 28 ++++++++++++++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 5 +++++ 3 files changed, 45 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c index 12380236d7ab..0a947e757d13 100644 --- a/drivers/clk/uniphier/clk-uniphier-core.c +++ b/drivers/clk/uniphier/clk-uniphier-core.c @@ -132,6 +132,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-clock", .data = uniphier_pxs3_sys_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-clock", + .data = uniphier_nx1_sys_clk_data, + }, /* Media I/O clock, SD clock */ { .compatible = "socionext,uniphier-ld4-mio-clock", @@ -165,6 +169,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-sd-clock", .data = uniphier_pro5_sd_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-sd-clock", + .data = uniphier_pro5_sd_clk_data, + }, /* Peripheral clock */ { .compatible = "socionext,uniphier-ld4-peri-clock", @@ -198,6 +206,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-peri-clock", .data = uniphier_pro4_peri_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-peri-clock", + .data = uniphier_pro4_peri_clk_data, + }, { /* sentinel */ } }; diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index 0ec28ebc39c2..e8bf85cd2d30 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -20,6 +20,10 @@ UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \ UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15) +#define UNIPHIER_NX1_SYS_CLK_SD \ + UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4), \ + UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6) + #define UNIPHIER_LD4_SYS_CLK_NAND(idx) \ UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32), \ UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2) @@ -302,3 +306,27 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { "spll/4", "spll/8", "s2pll/4", "s2pll/8"), { /* sentinel */ } }; + +const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = { + UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1), /* ARM: 2500 MHz */ + UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1), /* 800 MHz */ + UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6), + UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16), + UNIPHIER_NX1_SYS_CLK_SD, + UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8), + UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0), + UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16), /* =GIO */ + UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20), /* =GIO1P */ + UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24), + UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25), + UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26), + UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8), + UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0), + UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8), + /* CPU gears */ + UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32), + UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5, + "cpll/2", "cpll/4", "cpll/8", "cpll/16", + "cpll/32"), + { /* sentinel */ } +}; diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h index 9e30362e55e1..c54fb7895889 100644 --- a/drivers/clk/uniphier/clk-uniphier.h +++ b/drivers/clk/uniphier/clk-uniphier.h @@ -119,6 +119,10 @@ struct uniphier_clk_data { UNIPHIER_CLK_DIV2(parent, div0, div1), \ UNIPHIER_CLK_DIV2(parent, div2, div3) +#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4) \ + UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3), \ + UNIPHIER_CLK_DIV(parent, div4) + struct clk_hw *uniphier_clk_register_cpugear(struct device *dev, struct regmap *regmap, const char *name, @@ -146,6 +150,7 @@ extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[]; +extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[]; extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[]; -- 2.7.4 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 3/5] clk: uniphier: Add NX1 clock support @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add basic clock data for UniPhier NX1 SoC. This includes PLL and clock division data for cpufreq support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-core.c | 12 ++++++++++++ drivers/clk/uniphier/clk-uniphier-sys.c | 28 ++++++++++++++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 5 +++++ 3 files changed, 45 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c index 12380236d7ab..0a947e757d13 100644 --- a/drivers/clk/uniphier/clk-uniphier-core.c +++ b/drivers/clk/uniphier/clk-uniphier-core.c @@ -132,6 +132,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-clock", .data = uniphier_pxs3_sys_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-clock", + .data = uniphier_nx1_sys_clk_data, + }, /* Media I/O clock, SD clock */ { .compatible = "socionext,uniphier-ld4-mio-clock", @@ -165,6 +169,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-sd-clock", .data = uniphier_pro5_sd_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-sd-clock", + .data = uniphier_pro5_sd_clk_data, + }, /* Peripheral clock */ { .compatible = "socionext,uniphier-ld4-peri-clock", @@ -198,6 +206,10 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-pxs3-peri-clock", .data = uniphier_pro4_peri_clk_data, }, + { + .compatible = "socionext,uniphier-nx1-peri-clock", + .data = uniphier_pro4_peri_clk_data, + }, { /* sentinel */ } }; diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index 0ec28ebc39c2..e8bf85cd2d30 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -20,6 +20,10 @@ UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \ UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15) +#define UNIPHIER_NX1_SYS_CLK_SD \ + UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4), \ + UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6) + #define UNIPHIER_LD4_SYS_CLK_NAND(idx) \ UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32), \ UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2) @@ -302,3 +306,27 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { "spll/4", "spll/8", "s2pll/4", "s2pll/8"), { /* sentinel */ } }; + +const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = { + UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1), /* ARM: 2500 MHz */ + UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1), /* 800 MHz */ + UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6), + UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16), + UNIPHIER_NX1_SYS_CLK_SD, + UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8), + UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0), + UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16), /* =GIO */ + UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20), /* =GIO1P */ + UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24), + UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25), + UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26), + UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8), + UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0), + UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8), + /* CPU gears */ + UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32), + UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5, + "cpll/2", "cpll/4", "cpll/8", "cpll/16", + "cpll/32"), + { /* sentinel */ } +}; diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h index 9e30362e55e1..c54fb7895889 100644 --- a/drivers/clk/uniphier/clk-uniphier.h +++ b/drivers/clk/uniphier/clk-uniphier.h @@ -119,6 +119,10 @@ struct uniphier_clk_data { UNIPHIER_CLK_DIV2(parent, div0, div1), \ UNIPHIER_CLK_DIV2(parent, div2, div3) +#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4) \ + UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3), \ + UNIPHIER_CLK_DIV(parent, div4) + struct clk_hw *uniphier_clk_register_cpugear(struct device *dev, struct regmap *regmap, const char *name, @@ -146,6 +150,7 @@ extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[]; +extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[]; extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[]; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 11:09 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Update binding document for clocks implemented in SoC-glue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml index ee8d16a8019e..05a9d1f89756 100644 --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -46,6 +46,9 @@ properties: - socionext,uniphier-ld20-peri-clock - socionext,uniphier-pxs3-peri-clock - socionext,uniphier-nx1-peri-clock + - description: SoC-glue clock + enum: + - socionext,uniphier-pro4-sg-clock "#clock-cells": const: 1 @@ -95,3 +98,16 @@ examples: // other nodes ... }; + + - | + soc-glue@5f800000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + clock { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Update binding document for clocks implemented in SoC-glue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml index ee8d16a8019e..05a9d1f89756 100644 --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -46,6 +46,9 @@ properties: - socionext,uniphier-ld20-peri-clock - socionext,uniphier-pxs3-peri-clock - socionext,uniphier-nx1-peri-clock + - description: SoC-glue clock + enum: + - socionext,uniphier-pro4-sg-clock "#clock-cells": const: 1 @@ -95,3 +98,16 @@ examples: // other nodes ... }; + + - | + soc-glue@5f800000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + clock { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 19:08 ` Rob Herring -1 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-06 19:08 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Rob Herring, linux-clk, Michael Turquette, linux-kernel, Masami Hiramatsu, devicetree, Stephen Boyd, linux-arm-kernel On Wed, 06 Oct 2021 20:09:14 +0900, Kunihiko Hayashi wrote: > Update binding document for clocks implemented in SoC-glue. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/clock/socionext,uniphier-clock.example.dt.yaml:0:0: /example-3/soc-glue@5f800000: failed to match any schema with compatible: ['socionext,uniphier-sysctrl', 'simple-mfd', 'syscon'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1537058 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-06 19:08 ` Rob Herring 0 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-06 19:08 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Rob Herring, linux-clk, Michael Turquette, linux-kernel, Masami Hiramatsu, devicetree, Stephen Boyd, linux-arm-kernel On Wed, 06 Oct 2021 20:09:14 +0900, Kunihiko Hayashi wrote: > Update binding document for clocks implemented in SoC-glue. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/clock/socionext,uniphier-clock.example.dt.yaml:0:0: /example-3/soc-glue@5f800000: failed to match any schema with compatible: ['socionext,uniphier-sysctrl', 'simple-mfd', 'syscon'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1537058 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 19:49 ` Rob Herring -1 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-06 19:49 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: > Update binding document for clocks implemented in SoC-glue. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > index ee8d16a8019e..05a9d1f89756 100644 > --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > @@ -46,6 +46,9 @@ properties: > - socionext,uniphier-ld20-peri-clock > - socionext,uniphier-pxs3-peri-clock > - socionext,uniphier-nx1-peri-clock > + - description: SoC-glue clock > + enum: > + - socionext,uniphier-pro4-sg-clock > > "#clock-cells": > const: 1 > @@ -95,3 +98,16 @@ examples: > > // other nodes ... > }; > + > + - | > + soc-glue@5f800000 { > + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; > + reg = <0x5f800000 0x2000>; > + > + clock { > + compatible = "socionext,uniphier-pro4-sg-clock"; > + #clock-cells = <1>; > + }; > + > + // other nodes ... > + }; What's the value of this 2nd example? It's just a different compatible string. > -- > 2.7.4 > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-06 19:49 ` Rob Herring 0 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-06 19:49 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: > Update binding document for clocks implemented in SoC-glue. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/clock/socionext,uniphier-clock.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > index ee8d16a8019e..05a9d1f89756 100644 > --- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > @@ -46,6 +46,9 @@ properties: > - socionext,uniphier-ld20-peri-clock > - socionext,uniphier-pxs3-peri-clock > - socionext,uniphier-nx1-peri-clock > + - description: SoC-glue clock > + enum: > + - socionext,uniphier-pro4-sg-clock > > "#clock-cells": > const: 1 > @@ -95,3 +98,16 @@ examples: > > // other nodes ... > }; > + > + - | > + soc-glue@5f800000 { > + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; > + reg = <0x5f800000 0x2000>; > + > + clock { > + compatible = "socionext,uniphier-pro4-sg-clock"; > + #clock-cells = <1>; > + }; > + > + // other nodes ... > + }; What's the value of this 2nd example? It's just a different compatible string. > -- > 2.7.4 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-06 19:49 ` Rob Herring @ 2021-10-07 8:50 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-07 8:50 UTC (permalink / raw) To: Rob Herring Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel Hi Rob, On 2021/10/07 4:49, Rob Herring wrote: > On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: >> Update binding document for clocks implemented in SoC-glue. >> >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >> --- >> .../bindings/clock/socionext,uniphier-clock.yaml | 16 > ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> index ee8d16a8019e..05a9d1f89756 100644 >> --- > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> +++ > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> @@ -46,6 +46,9 @@ properties: >> - socionext,uniphier-ld20-peri-clock >> - socionext,uniphier-pxs3-peri-clock >> - socionext,uniphier-nx1-peri-clock >> + - description: SoC-glue clock >> + enum: >> + - socionext,uniphier-pro4-sg-clock >> >> "#clock-cells": >> const: 1 >> @@ -95,3 +98,16 @@ examples: >> >> // other nodes ... >> }; >> + >> + - | >> + soc-glue@5f800000 { >> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", > "syscon"; >> + reg = <0x5f800000 0x2000>; >> + >> + clock { >> + compatible = "socionext,uniphier-pro4-sg-clock"; >> + #clock-cells = <1>; >> + }; >> + >> + // other nodes ... >> + }; > > What's the value of this 2nd example? It's just a different compatible > string. Following the previous three examples in the document, it describes the difference between the parent nodes that place the clock. They are common to be child nodes of "syscon", and the definition of the parent node is not in this document. Should I put them together in a common example? Thank you, --- Best Regards Kunihiko Hayashi ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-07 8:50 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-07 8:50 UTC (permalink / raw) To: Rob Herring Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel Hi Rob, On 2021/10/07 4:49, Rob Herring wrote: > On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: >> Update binding document for clocks implemented in SoC-glue. >> >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >> --- >> .../bindings/clock/socionext,uniphier-clock.yaml | 16 > ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> index ee8d16a8019e..05a9d1f89756 100644 >> --- > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> +++ > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >> @@ -46,6 +46,9 @@ properties: >> - socionext,uniphier-ld20-peri-clock >> - socionext,uniphier-pxs3-peri-clock >> - socionext,uniphier-nx1-peri-clock >> + - description: SoC-glue clock >> + enum: >> + - socionext,uniphier-pro4-sg-clock >> >> "#clock-cells": >> const: 1 >> @@ -95,3 +98,16 @@ examples: >> >> // other nodes ... >> }; >> + >> + - | >> + soc-glue@5f800000 { >> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", > "syscon"; >> + reg = <0x5f800000 0x2000>; >> + >> + clock { >> + compatible = "socionext,uniphier-pro4-sg-clock"; >> + #clock-cells = <1>; >> + }; >> + >> + // other nodes ... >> + }; > > What's the value of this 2nd example? It's just a different compatible > string. Following the previous three examples in the document, it describes the difference between the parent nodes that place the clock. They are common to be child nodes of "syscon", and the definition of the parent node is not in this document. Should I put them together in a common example? Thank you, --- Best Regards Kunihiko Hayashi _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-07 8:50 ` Kunihiko Hayashi @ 2021-10-08 19:20 ` Rob Herring -1 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-08 19:20 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On Thu, Oct 7, 2021 at 3:50 AM Kunihiko Hayashi <hayashi.kunihiko@socionext.com> wrote: > > Hi Rob, > > On 2021/10/07 4:49, Rob Herring wrote: > > On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: > >> Update binding document for clocks implemented in SoC-glue. > >> > >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > >> --- > >> .../bindings/clock/socionext,uniphier-clock.yaml | 16 > > ++++++++++++++++ > >> 1 file changed, 16 insertions(+) > >> > >> diff --git > > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> index ee8d16a8019e..05a9d1f89756 100644 > >> --- > > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> +++ > > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> @@ -46,6 +46,9 @@ properties: > >> - socionext,uniphier-ld20-peri-clock > >> - socionext,uniphier-pxs3-peri-clock > >> - socionext,uniphier-nx1-peri-clock > >> + - description: SoC-glue clock > >> + enum: > >> + - socionext,uniphier-pro4-sg-clock > >> > >> "#clock-cells": > >> const: 1 > >> @@ -95,3 +98,16 @@ examples: > >> > >> // other nodes ... > >> }; > >> + > >> + - | > >> + soc-glue@5f800000 { > >> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", > > "syscon"; > >> + reg = <0x5f800000 0x2000>; > >> + > >> + clock { > >> + compatible = "socionext,uniphier-pro4-sg-clock"; > >> + #clock-cells = <1>; > >> + }; > >> + > >> + // other nodes ... > >> + }; > > > > What's the value of this 2nd example? It's just a different compatible > > string. > Following the previous three examples in the document, it describes the > difference between the parent nodes that place the clock. > > They are common to be child nodes of "syscon", and the definition of the > parent node is not in this document. > Should I put them together in a common example? I'd just drop the example. Rob ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-08 19:20 ` Rob Herring 0 siblings, 0 replies; 22+ messages in thread From: Rob Herring @ 2021-10-08 19:20 UTC (permalink / raw) To: Kunihiko Hayashi Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On Thu, Oct 7, 2021 at 3:50 AM Kunihiko Hayashi <hayashi.kunihiko@socionext.com> wrote: > > Hi Rob, > > On 2021/10/07 4:49, Rob Herring wrote: > > On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: > >> Update binding document for clocks implemented in SoC-glue. > >> > >> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > >> --- > >> .../bindings/clock/socionext,uniphier-clock.yaml | 16 > > ++++++++++++++++ > >> 1 file changed, 16 insertions(+) > >> > >> diff --git > > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> index ee8d16a8019e..05a9d1f89756 100644 > >> --- > > a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> +++ > > b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml > >> @@ -46,6 +46,9 @@ properties: > >> - socionext,uniphier-ld20-peri-clock > >> - socionext,uniphier-pxs3-peri-clock > >> - socionext,uniphier-nx1-peri-clock > >> + - description: SoC-glue clock > >> + enum: > >> + - socionext,uniphier-pro4-sg-clock > >> > >> "#clock-cells": > >> const: 1 > >> @@ -95,3 +98,16 @@ examples: > >> > >> // other nodes ... > >> }; > >> + > >> + - | > >> + soc-glue@5f800000 { > >> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", > > "syscon"; > >> + reg = <0x5f800000 0x2000>; > >> + > >> + clock { > >> + compatible = "socionext,uniphier-pro4-sg-clock"; > >> + #clock-cells = <1>; > >> + }; > >> + > >> + // other nodes ... > >> + }; > > > > What's the value of this 2nd example? It's just a different compatible > > string. > Following the previous three examples in the document, it describes the > difference between the parent nodes that place the clock. > > They are common to be child nodes of "syscon", and the definition of the > parent node is not in this document. > Should I put them together in a common example? I'd just drop the example. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue 2021-10-08 19:20 ` Rob Herring @ 2021-10-10 23:55 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-10 23:55 UTC (permalink / raw) To: Rob Herring Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On 2021/10/09 4:20, Rob Herring wrote: > On Thu, Oct 7, 2021 at 3:50 AM Kunihiko Hayashi > <hayashi.kunihiko@socionext.com> wrote: >> >> Hi Rob, >> >> On 2021/10/07 4:49, Rob Herring wrote: >>> On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: >>>> Update binding document for clocks implemented in SoC-glue. >>>> >>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >>>> --- >>>> .../bindings/clock/socionext,uniphier-clock.yaml | 16 >>> ++++++++++++++++ >>>> 1 file changed, 16 insertions(+) >>>> >>>> diff --git >>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> index ee8d16a8019e..05a9d1f89756 100644 >>>> --- >>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> +++ >>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> @@ -46,6 +46,9 @@ properties: >>>> - socionext,uniphier-ld20-peri-clock >>>> - socionext,uniphier-pxs3-peri-clock >>>> - socionext,uniphier-nx1-peri-clock >>>> + - description: SoC-glue clock >>>> + enum: >>>> + - socionext,uniphier-pro4-sg-clock >>>> >>>> "#clock-cells": >>>> const: 1 >>>> @@ -95,3 +98,16 @@ examples: >>>> >>>> // other nodes ... >>>> }; >>>> + >>>> + - | >>>> + soc-glue@5f800000 { >>>> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", >>> "syscon"; >>>> + reg = <0x5f800000 0x2000>; >>>> + >>>> + clock { >>>> + compatible = "socionext,uniphier-pro4-sg-clock"; >>>> + #clock-cells = <1>; >>>> + }; >>>> + >>>> + // other nodes ... >>>> + }; >>> >>> What's the value of this 2nd example? It's just a different compatible >>> string. >> Following the previous three examples in the document, it describes the >> difference between the parent nodes that place the clock. >> >> They are common to be child nodes of "syscon", and the definition of the >> parent node is not in this document. >> Should I put them together in a common example? > > I'd just drop the example. I see. I'd drop the example in next. Thank you, --- Best Regards Kunihiko Hayashi ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue @ 2021-10-10 23:55 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-10 23:55 UTC (permalink / raw) To: Rob Herring Cc: Michael Turquette, Stephen Boyd, Masami Hiramatsu, linux-clk, devicetree, linux-arm-kernel, linux-kernel On 2021/10/09 4:20, Rob Herring wrote: > On Thu, Oct 7, 2021 at 3:50 AM Kunihiko Hayashi > <hayashi.kunihiko@socionext.com> wrote: >> >> Hi Rob, >> >> On 2021/10/07 4:49, Rob Herring wrote: >>> On Wed, Oct 06, 2021 at 08:09:14PM +0900, Kunihiko Hayashi wrote: >>>> Update binding document for clocks implemented in SoC-glue. >>>> >>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> >>>> --- >>>> .../bindings/clock/socionext,uniphier-clock.yaml | 16 >>> ++++++++++++++++ >>>> 1 file changed, 16 insertions(+) >>>> >>>> diff --git >>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> index ee8d16a8019e..05a9d1f89756 100644 >>>> --- >>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> +++ >>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml >>>> @@ -46,6 +46,9 @@ properties: >>>> - socionext,uniphier-ld20-peri-clock >>>> - socionext,uniphier-pxs3-peri-clock >>>> - socionext,uniphier-nx1-peri-clock >>>> + - description: SoC-glue clock >>>> + enum: >>>> + - socionext,uniphier-pro4-sg-clock >>>> >>>> "#clock-cells": >>>> const: 1 >>>> @@ -95,3 +98,16 @@ examples: >>>> >>>> // other nodes ... >>>> }; >>>> + >>>> + - | >>>> + soc-glue@5f800000 { >>>> + compatible = "socionext,uniphier-sysctrl", "simple-mfd", >>> "syscon"; >>>> + reg = <0x5f800000 0x2000>; >>>> + >>>> + clock { >>>> + compatible = "socionext,uniphier-pro4-sg-clock"; >>>> + #clock-cells = <1>; >>>> + }; >>>> + >>>> + // other nodes ... >>>> + }; >>> >>> What's the value of this 2nd example? It's just a different compatible >>> string. >> Following the previous three examples in the document, it describes the >> difference between the parent nodes that place the clock. >> >> They are common to be child nodes of "syscon", and the definition of the >> parent node is not in this document. >> Should I put them together in a common example? > > I'd just drop the example. I see. I'd drop the example in next. Thank you, --- Best Regards Kunihiko Hayashi _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v2 5/5] clk: uniphier: Add SoC-glue clock source selector support for Pro4 2021-10-06 11:09 ` Kunihiko Hayashi @ 2021-10-06 11:09 ` Kunihiko Hayashi -1 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add SoC-glue clock source selector for ahci controller on UniPhier SoCs. Currently this supports Pro4 only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-core.c | 5 +++++ drivers/clk/uniphier/clk-uniphier-sys.c | 17 +++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 1 + 3 files changed, 23 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c index 0a947e757d13..46c66fac48e6 100644 --- a/drivers/clk/uniphier/clk-uniphier-core.c +++ b/drivers/clk/uniphier/clk-uniphier-core.c @@ -210,6 +210,11 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-nx1-peri-clock", .data = uniphier_pro4_peri_clk_data, }, + /* SoC-glue clock */ + { + .compatible = "socionext,uniphier-pro4-sg-clock", + .data = uniphier_pro4_sg_clk_data, + }, { /* sentinel */ } }; diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index e8bf85cd2d30..0180470b24db 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -330,3 +330,20 @@ const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = { "cpll/32"), { /* sentinel */ } }; + +const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = { + UNIPHIER_CLK_DIV("gpll", 4), + { + .name = "sata-ref", + .type = UNIPHIER_CLK_TYPE_MUX, + .idx = 0, + .data.mux = { + .parent_names = { "gpll/4", "ref", }, + .num_parents = 2, + .reg = 0x1a28, + .masks = { 0x1, 0x1, }, + .vals = { 0x0, 0x1, }, + }, + }, + { /* sentinel */ } +}; diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h index c54fb7895889..dea0c7829aee 100644 --- a/drivers/clk/uniphier/clk-uniphier.h +++ b/drivers/clk/uniphier/clk-uniphier.h @@ -155,5 +155,6 @@ extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[]; extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[]; extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[]; +extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[]; #endif /* __CLK_UNIPHIER_H__ */ -- 2.7.4 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v2 5/5] clk: uniphier: Add SoC-glue clock source selector support for Pro4 @ 2021-10-06 11:09 ` Kunihiko Hayashi 0 siblings, 0 replies; 22+ messages in thread From: Kunihiko Hayashi @ 2021-10-06 11:09 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Masami Hiramatsu Cc: linux-clk, devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Add SoC-glue clock source selector for ahci controller on UniPhier SoCs. Currently this supports Pro4 only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/clk/uniphier/clk-uniphier-core.c | 5 +++++ drivers/clk/uniphier/clk-uniphier-sys.c | 17 +++++++++++++++++ drivers/clk/uniphier/clk-uniphier.h | 1 + 3 files changed, 23 insertions(+) diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c index 0a947e757d13..46c66fac48e6 100644 --- a/drivers/clk/uniphier/clk-uniphier-core.c +++ b/drivers/clk/uniphier/clk-uniphier-core.c @@ -210,6 +210,11 @@ static const struct of_device_id uniphier_clk_match[] = { .compatible = "socionext,uniphier-nx1-peri-clock", .data = uniphier_pro4_peri_clk_data, }, + /* SoC-glue clock */ + { + .compatible = "socionext,uniphier-pro4-sg-clock", + .data = uniphier_pro4_sg_clk_data, + }, { /* sentinel */ } }; diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index e8bf85cd2d30..0180470b24db 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -330,3 +330,20 @@ const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = { "cpll/32"), { /* sentinel */ } }; + +const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = { + UNIPHIER_CLK_DIV("gpll", 4), + { + .name = "sata-ref", + .type = UNIPHIER_CLK_TYPE_MUX, + .idx = 0, + .data.mux = { + .parent_names = { "gpll/4", "ref", }, + .num_parents = 2, + .reg = 0x1a28, + .masks = { 0x1, 0x1, }, + .vals = { 0x0, 0x1, }, + }, + }, + { /* sentinel */ } +}; diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h index c54fb7895889..dea0c7829aee 100644 --- a/drivers/clk/uniphier/clk-uniphier.h +++ b/drivers/clk/uniphier/clk-uniphier.h @@ -155,5 +155,6 @@ extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[]; extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[]; extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[]; extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[]; +extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[]; #endif /* __CLK_UNIPHIER_H__ */ -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 22+ messages in thread
end of thread, other threads:[~2021-10-10 23:58 UTC | newest] Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-10-06 11:09 [PATCH v2 0/5] clk: uniphier: Introduce some clock features and NX1 support Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi 2021-10-06 11:09 ` [PATCH v2 1/5] clk: uniphier: Add audio system and video input clock control for PXs3 Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi 2021-10-06 11:09 ` [PATCH v2 2/5] dt-bindings: clock: uniphier: Add NX1 clock binding Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi 2021-10-06 11:09 ` [PATCH v2 3/5] clk: uniphier: Add NX1 clock support Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi 2021-10-06 11:09 ` [PATCH v2 4/5] dt-bindings: clock: uniphier: Add clock binding for SoC-glue Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi 2021-10-06 19:08 ` Rob Herring 2021-10-06 19:08 ` Rob Herring 2021-10-06 19:49 ` Rob Herring 2021-10-06 19:49 ` Rob Herring 2021-10-07 8:50 ` Kunihiko Hayashi 2021-10-07 8:50 ` Kunihiko Hayashi 2021-10-08 19:20 ` Rob Herring 2021-10-08 19:20 ` Rob Herring 2021-10-10 23:55 ` Kunihiko Hayashi 2021-10-10 23:55 ` Kunihiko Hayashi 2021-10-06 11:09 ` [PATCH v2 5/5] clk: uniphier: Add SoC-glue clock source selector support for Pro4 Kunihiko Hayashi 2021-10-06 11:09 ` Kunihiko Hayashi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.