From: dillon.minfei@gmail.com To: mchehab@kernel.org, mchehab+huawei@kernel.org, hverkuil-cisco@xs4all.nl, ezequiel@collabora.com, gnurou@gmail.com, pihsun@chromium.org, mcoquelin.stm32@gmail.com, alexandre.torgue@foss.st.com, mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, gabriel.fernandez@st.com, gabriel.fernandez@foss.st.com Cc: patrice.chotard@foss.st.com, hugues.fruchet@foss.st.com, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, Dillon Min <dillon.minfei@gmail.com> Subject: [PATCH v5 06/10] media: videobuf2: Fix the size printk format Date: Mon, 18 Oct 2021 13:04:44 +0800 [thread overview] Message-ID: <1634533488-25334-7-git-send-email-dillon.minfei@gmail.com> (raw) In-Reply-To: <1634533488-25334-1-git-send-email-dillon.minfei@gmail.com> From: Dillon Min <dillon.minfei@gmail.com> Since the type of parameter size is unsigned long, it should printk by %lu, instead of %ld, fix it. Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf") Signed-off-by: Dillon Min <dillon.minfei@gmail.com> --- drivers/media/common/videobuf2/videobuf2-dma-contig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c index b052a4e36961..28b917e03929 100644 --- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c @@ -257,7 +257,7 @@ static void *vb2_dc_alloc(struct vb2_buffer *vb, ret = vb2_dc_alloc_coherent(buf); if (ret) { - dev_err(dev, "dma alloc of size %ld failed\n", size); + dev_err(dev, "dma alloc of size %lu failed\n", size); kfree(buf); return ERR_PTR(-ENOMEM); } @@ -298,7 +298,7 @@ static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma) vma->vm_ops->open(vma); - pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n", + pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %lu\n", __func__, (unsigned long)buf->dma_addr, vma->vm_start, buf->size); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com To: mchehab@kernel.org, mchehab+huawei@kernel.org, hverkuil-cisco@xs4all.nl, ezequiel@collabora.com, gnurou@gmail.com, pihsun@chromium.org, mcoquelin.stm32@gmail.com, alexandre.torgue@foss.st.com, mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, gabriel.fernandez@st.com, gabriel.fernandez@foss.st.com Cc: patrice.chotard@foss.st.com, hugues.fruchet@foss.st.com, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, Dillon Min <dillon.minfei@gmail.com> Subject: [PATCH v5 06/10] media: videobuf2: Fix the size printk format Date: Mon, 18 Oct 2021 13:04:44 +0800 [thread overview] Message-ID: <1634533488-25334-7-git-send-email-dillon.minfei@gmail.com> (raw) In-Reply-To: <1634533488-25334-1-git-send-email-dillon.minfei@gmail.com> From: Dillon Min <dillon.minfei@gmail.com> Since the type of parameter size is unsigned long, it should printk by %lu, instead of %ld, fix it. Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf") Signed-off-by: Dillon Min <dillon.minfei@gmail.com> --- drivers/media/common/videobuf2/videobuf2-dma-contig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c index b052a4e36961..28b917e03929 100644 --- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c @@ -257,7 +257,7 @@ static void *vb2_dc_alloc(struct vb2_buffer *vb, ret = vb2_dc_alloc_coherent(buf); if (ret) { - dev_err(dev, "dma alloc of size %ld failed\n", size); + dev_err(dev, "dma alloc of size %lu failed\n", size); kfree(buf); return ERR_PTR(-ENOMEM); } @@ -298,7 +298,7 @@ static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma) vma->vm_ops->open(vma); - pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n", + pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %lu\n", __func__, (unsigned long)buf->dma_addr, vma->vm_start, buf->size); -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-18 5:06 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-18 5:04 [PATCH v5 00/10] Add support for DMA2D of STMicroelectronics STM32 Soc series dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 01/10] media: admin-guide: add stm32-dma2d description dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 02/10] media: dt-bindings: media: add document for STM32 DMA2d bindings dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 03/10] ARM: dts: stm32: Add DMA2D support for STM32F429 series soc dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 04/10] ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 05/10] media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` dillon.minfei [this message] 2021-10-18 5:04 ` [PATCH v5 06/10] media: videobuf2: Fix the size printk format dillon.minfei 2021-10-18 5:04 ` [PATCH v5 07/10] media: v4l2-ctrls: Add V4L2_CID_COLORFX_CBCR max setting dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 08/10] media: v4l2-ctrls: Add RGB color effects control dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 5:04 ` [PATCH v5 09/10] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 9:37 ` Hans Verkuil 2021-10-18 9:37 ` Hans Verkuil 2021-10-18 9:58 ` Dillon Min 2021-10-18 9:58 ` Dillon Min 2021-10-18 5:04 ` [PATCH v5 10/10] media: stm32-dma2d: STM32 DMA2D driver dillon.minfei 2021-10-18 5:04 ` dillon.minfei 2021-10-18 9:30 ` Hans Verkuil 2021-10-18 9:30 ` Hans Verkuil 2021-10-18 10:25 ` Dillon Min 2021-10-18 10:25 ` Dillon Min 2021-10-19 2:30 ` Dillon Min 2021-10-19 2:30 ` Dillon Min 2021-10-19 7:20 ` Hans Verkuil 2021-10-19 7:20 ` Hans Verkuil 2021-10-25 19:37 ` [PATCH v5 00/10] Add support for DMA2D of STMicroelectronics STM32 Soc series Nicolas Dufresne 2021-10-25 19:37 ` Nicolas Dufresne 2021-10-25 22:20 ` Dillon Min 2021-10-25 22:20 ` Dillon Min
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1634533488-25334-7-git-send-email-dillon.minfei@gmail.com \ --to=dillon.minfei@gmail.com \ --cc=alexandre.torgue@foss.st.com \ --cc=devicetree@vger.kernel.org \ --cc=ezequiel@collabora.com \ --cc=gabriel.fernandez@foss.st.com \ --cc=gabriel.fernandez@st.com \ --cc=gnurou@gmail.com \ --cc=hugues.fruchet@foss.st.com \ --cc=hverkuil-cisco@xs4all.nl \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mchehab+huawei@kernel.org \ --cc=mchehab@kernel.org \ --cc=mcoquelin.stm32@gmail.com \ --cc=mturquette@baylibre.com \ --cc=patrice.chotard@foss.st.com \ --cc=pihsun@chromium.org \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.