From: Abel Vesa <abel.vesa@nxp.com> To: Rob Herring <robh@kernel.org>, Dong Aisheng <aisheng.dong@nxp.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Fabio Estevam <festevam@gmail.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>, linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Abel Vesa <abel.vesa@nxp.com> Subject: [RESEND v4 00/10] arm64: dts: Add i.MX8DXL initial support Date: Thu, 16 Dec 2021 20:48:04 +0200 [thread overview] Message-ID: <1639680494-23183-1-git-send-email-abel.vesa@nxp.com> (raw) Here is the v4: https://lore.kernel.org/linux-arm-kernel/1636566415-22750-1-git-send-email-abel.vesa@nxp.com/ No changes since v4. The following patches have been applied since v4 was sent: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match Abel Vesa (5): dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching arm64: dts: imx8-ss-lsio: Add mu5a mailbox arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible Jacky Bai (5): arm64: dts: freescale: Add the top level dtsi support for imx8dxl arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl arm64: dts: imx8dxl: Add i.MX8DXL evk board support .../bindings/arm/freescale/fsl,scu.txt | 3 +- .../bindings/serial/fsl-lpuart.yaml | 7 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8-ss-lsio.dtsi | 7 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 ++++ .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 +++++++++ .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 ++++++++++++++++ 10 files changed, 832 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@nxp.com> To: Rob Herring <robh@kernel.org>, Dong Aisheng <aisheng.dong@nxp.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Fabio Estevam <festevam@gmail.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>, linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Abel Vesa <abel.vesa@nxp.com> Subject: [RESEND v4 00/10] arm64: dts: Add i.MX8DXL initial support Date: Thu, 16 Dec 2021 20:48:04 +0200 [thread overview] Message-ID: <1639680494-23183-1-git-send-email-abel.vesa@nxp.com> (raw) Here is the v4: https://lore.kernel.org/linux-arm-kernel/1636566415-22750-1-git-send-email-abel.vesa@nxp.com/ No changes since v4. The following patches have been applied since v4 was sent: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match Abel Vesa (5): dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching arm64: dts: imx8-ss-lsio: Add mu5a mailbox arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible Jacky Bai (5): arm64: dts: freescale: Add the top level dtsi support for imx8dxl arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl arm64: dts: imx8dxl: Add i.MX8DXL evk board support .../bindings/arm/freescale/fsl,scu.txt | 3 +- .../bindings/serial/fsl-lpuart.yaml | 7 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8-ss-lsio.dtsi | 7 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 ++++ .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 +++++++++ .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 ++++++++++++++++ 10 files changed, 832 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-12-16 18:49 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-16 18:48 Abel Vesa [this message] 2021-12-16 18:48 ` [RESEND v4 00/10] arm64: dts: Add i.MX8DXL initial support Abel Vesa 2021-12-16 18:48 ` [RESEND v4 01/10] dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2022-01-26 12:27 ` Shawn Guo 2022-01-26 12:27 ` Shawn Guo 2022-02-10 21:49 ` Abel Vesa 2022-02-10 21:49 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 03/10] arm64: dts: imx8-ss-lsio: Add mu5a mailbox Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2022-01-26 12:36 ` Shawn Guo 2022-01-26 12:36 ` Shawn Guo 2021-12-16 18:48 ` [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2022-01-26 12:47 ` Shawn Guo 2022-01-26 12:47 ` Shawn Guo 2022-02-10 21:33 ` Abel Vesa 2022-02-10 21:33 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 06/10] arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 07/10] arm64: dts: freescale: Add lsio " Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2022-01-26 12:53 ` Shawn Guo 2022-01-26 12:53 ` Shawn Guo 2022-02-10 21:27 ` Abel Vesa 2022-02-10 21:27 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 09/10] dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-16 18:48 ` [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible Abel Vesa 2021-12-16 18:48 ` Abel Vesa 2021-12-17 16:59 ` Greg Kroah-Hartman 2021-12-17 16:59 ` Greg Kroah-Hartman 2021-12-18 21:58 ` Abel Vesa 2021-12-18 21:58 ` Abel Vesa 2021-12-20 15:35 ` Greg Kroah-Hartman 2021-12-20 15:35 ` Greg Kroah-Hartman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1639680494-23183-1-git-send-email-abel.vesa@nxp.com \ --to=abel.vesa@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.