[PATCH v7 0/5] Update mdp clk to max supported value to support higher refresh rates

[PATCH v7 0/5] Update mdp clk to max supported value to support higher refresh rates

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock to
max frequency during bind/probe sequence.

Changes in v2:
- Remove assigned-clock-rate property and set mdp clk during
resume sequence.
- Add fixes tag.

Changes in v3:
- Remove extra line after fixes tag.(Stephen Boyd)
- Add similar changes for sc7180, sdm845 which uses opp table for
voting mdp clk.(Stephen Boyd)
- Drop patch: "drm/msm/disp/dpu1: set mdp clk to the maximum
frequency in opp table"

Changes in v4:
- Add similar change for sm8250.(Dmitry)

Changes in v5:
- Add change to set mdp clk to max frequency in opp table
during mdp probe/bind.

Changes in v6:
- Remove change log in dt patch.
- Fix the leak reference for opp by adding dev_pm_opp_put. (Dmitry)

Changes in v7:
- Update commit message and fix tag. (Stephen/Doug)

Vinod Polimera (5):
  drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table
    during probe
  arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp
    clk

 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sdm845.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sm8250.dtsi    | 9 ++-------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
 5 files changed, 16 insertions(+), 28 deletions(-)

-- 
2.7.4

[PATCH v7 0/5] Update mdp clk to max supported value to support higher refresh rates

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock to
max frequency during bind/probe sequence.

Changes in v2:
- Remove assigned-clock-rate property and set mdp clk during
resume sequence.
- Add fixes tag.

Changes in v3:
- Remove extra line after fixes tag.(Stephen Boyd)
- Add similar changes for sc7180, sdm845 which uses opp table for
voting mdp clk.(Stephen Boyd)
- Drop patch: "drm/msm/disp/dpu1: set mdp clk to the maximum
frequency in opp table"

Changes in v4:
- Add similar change for sm8250.(Dmitry)

Changes in v5:
- Add change to set mdp clk to max frequency in opp table
during mdp probe/bind.

Changes in v6:
- Remove change log in dt patch.
- Fix the leak reference for opp by adding dev_pm_opp_put. (Dmitry)

Changes in v7:
- Update commit message and fix tag. (Stephen/Doug)

Vinod Polimera (5):
  drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table
    during probe
  arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp
    clk
  arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp
    clk

 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sdm845.dtsi    | 9 ++-------
 arch/arm64/boot/dts/qcom/sm8250.dtsi    | 9 ++-------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
 5 files changed, 16 insertions(+), 28 deletions(-)

-- 
2.7.4

[PATCH v7 1/5] drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table during probe

[Vinod Polimera]

Set mdp clock to max clock rate during probe/bind sequence from the
opp table so that rails are not at undetermined state. Since we do not
know what will be the rate set in boot loader, it would be ideal to
vote at max frequency. There could be a firmware display programmed
in bootloader and we want to transition it to kernel without underflowing.
The clock will be scaled down later when framework sends an update.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index e29796c..9c346ce 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1202,7 +1202,9 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *ddev = priv->dev;
 	struct dpu_kms *dpu_kms;
+	struct dev_pm_opp *opp;
 	int ret = 0;
+	unsigned long max_freq = ULONG_MAX;
 
 	dpu_kms = devm_kzalloc(&pdev->dev, sizeof(*dpu_kms), GFP_KERNEL);
 	if (!dpu_kms)
@@ -1225,6 +1227,12 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	}
 	dpu_kms->num_clocks = ret;
 
+	opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+	if (!IS_ERR(opp))
+		dev_pm_opp_put(opp);
+
+	dev_pm_opp_set_rate(dev, max_freq);
+
 	platform_set_drvdata(pdev, dpu_kms);
 
 	ret = msm_kms_init(&dpu_kms->base, &kms_funcs);
-- 
2.7.4

[PATCH v7 1/5] drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table during probe

[Vinod Polimera]

Set mdp clock to max clock rate during probe/bind sequence from the
opp table so that rails are not at undetermined state. Since we do not
know what will be the rate set in boot loader, it would be ideal to
vote at max frequency. There could be a firmware display programmed
in bootloader and we want to transition it to kernel without underflowing.
The clock will be scaled down later when framework sends an update.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index e29796c..9c346ce 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1202,7 +1202,9 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *ddev = priv->dev;
 	struct dpu_kms *dpu_kms;
+	struct dev_pm_opp *opp;
 	int ret = 0;
+	unsigned long max_freq = ULONG_MAX;
 
 	dpu_kms = devm_kzalloc(&pdev->dev, sizeof(*dpu_kms), GFP_KERNEL);
 	if (!dpu_kms)
@@ -1225,6 +1227,12 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	}
 	dpu_kms->num_clocks = ret;
 
+	opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+	if (!IS_ERR(opp))
+		dev_pm_opp_put(opp);
+
+	dev_pm_opp_set_rate(dev, max_freq);
+
 	platform_set_drvdata(pdev, dpu_kms);
 
 	ret = msm_kms_init(&dpu_kms->base, &kms_funcs);
-- 
2.7.4

Re: [PATCH v7 1/5] drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table during probe

[Doug Anderson]

Hi,

On Mon, Mar 21, 2022 at 8:27 PM Vinod Polimera
<quic_vpolimer@quicinc.com> wrote:
>
> Set mdp clock to max clock rate during probe/bind sequence from the
> opp table so that rails are not at undetermined state. Since we do not
> know what will be the rate set in boot loader, it would be ideal to
> vote at max frequency. There could be a firmware display programmed
> in bootloader and we want to transition it to kernel without underflowing.
> The clock will be scaled down later when framework sends an update.
>
> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
>  1 file changed, 8 insertions(+)

Just wanted to confirm that this patch will be queued up somewhat
soon. I think it's good to go but I don't see it in any trees yet. ;-)

FWIW, I can also say that I've tested this patch and it fixes the
underrun issues on sc7280-herobrine-rev1.

Tested-by: Douglas Anderson <dianders@chromium.org>

-Doug

Re: [PATCH v7 1/5] drm/msm/disp/dpu1: set mdp clk to the maximum frequency in opp table during probe

[Doug Anderson]

Hi,

On Mon, Mar 21, 2022 at 8:27 PM Vinod Polimera
<quic_vpolimer@quicinc.com> wrote:
>
> Set mdp clock to max clock rate during probe/bind sequence from the
> opp table so that rails are not at undetermined state. Since we do not
> know what will be the rate set in boot loader, it would be ideal to
> vote at max frequency. There could be a firmware display programmed
> in bootloader and we want to transition it to kernel without underflowing.
> The clock will be scaled down later when framework sends an update.
>
> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
>  1 file changed, 8 insertions(+)

Just wanted to confirm that this patch will be queued up somewhat
soon. I think it's good to go but I don't see it in any trees yet. ;-)

FWIW, I can also say that I've tested this patch and it fixes the
underrun issues on sc7280-herobrine-rev1.

Tested-by: Douglas Anderson <dianders@chromium.org>

-Doug

[PATCH v7 2/5] arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index c07765d..a3c768c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3086,9 +3086,6 @@
 				      "ahb",
 				      "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -3122,11 +3119,9 @@
 					      "lut",
 					      "core",
 					      "vsync";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
 						<&dispcc DISP_CC_MDSS_AHB_CLK>;
-				assigned-clock-rates = <300000000>,
-							<19200000>,
+				assigned-clock-rates = <19200000>,
 							<19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
-- 
2.7.4

[PATCH v7 2/5] arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index c07765d..a3c768c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3086,9 +3086,6 @@
 				      "ahb",
 				      "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -3122,11 +3119,9 @@
 					      "lut",
 					      "core",
 					      "vsync";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
 						<&dispcc DISP_CC_MDSS_AHB_CLK>;
-				assigned-clock-rates = <300000000>,
-							<19200000>,
+				assigned-clock-rates = <19200000>,
 							<19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
-- 
2.7.4

[PATCH v7 3/5] arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e1c46b8..eaab746 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2900,9 +2900,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "ahb", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -2932,12 +2929,10 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "bus", "iface", "rot", "lut", "core",
 					      "vsync";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
 						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
 						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
-				assigned-clock-rates = <300000000>,
-						       <19200000>,
+				assigned-clock-rates = <19200000>,
 						       <19200000>,
 						       <19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
-- 
2.7.4

[PATCH v7 3/5] arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e1c46b8..eaab746 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2900,9 +2900,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "ahb", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -2932,12 +2929,10 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "bus", "iface", "rot", "lut", "core",
 					      "vsync";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
 						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
 						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
-				assigned-clock-rates = <300000000>,
-						       <19200000>,
+				assigned-clock-rates = <19200000>,
 						       <19200000>,
 						       <19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
-- 
2.7.4

[PATCH v7 4/5] arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 41f4e46..c0771d2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4240,9 +4240,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -4273,10 +4270,8 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <300000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
-- 
2.7.4

[PATCH v7 4/5] arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 41f4e46..c0771d2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4240,9 +4240,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -4273,10 +4270,8 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <300000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
-- 
2.7.4

[PATCH v7 5/5] arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303..2105eb7 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3164,9 +3164,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "bus", "nrt_bus", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <460000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -3191,10 +3188,8 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "iface", "bus", "core", "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
-- 
2.7.4

[PATCH v7 5/5] arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp clk

[Vinod Polimera]

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

This patch is dependent on the patch ("drm/msm/disp/dpu1: set mdp clk
to the maximum frequency in opp table during probe") [1].

[1] https://lore.kernel.org/r/1647269217-14064-2-git-send-email-quic_vpolimer@quicinc.com/

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303..2105eb7 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3164,9 +3164,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "bus", "nrt_bus", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <460000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -3191,10 +3188,8 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "iface", "bus", "core", "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
-- 
2.7.4

Re: (subset) [PATCH v7 0/5] Update mdp clk to max supported value to support higher refresh rates

[Bjorn Andersson]

On Tue, 22 Mar 2022 08:57:06 +0530, Vinod Polimera wrote:
> Drop the assigned clock rate property and vote on the mdp clock to
> max frequency during bind/probe sequence.
> 
> Changes in v2:
> - Remove assigned-clock-rate property and set mdp clk during
> resume sequence.
> - Add fixes tag.
> 
> [...]

Applied, thanks!

[2/5] arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp clk
      commit: 5241fd7fee9bee0cffa33f6d074194e94831e467
[3/5] arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp clk
      commit: aa4ae511a760e66f22641d9b9b6052b469df3c10
[4/5] arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp clk
      commit: 0b24829fd74cf954b3a02e9e4c4da3c098c69fbc
[5/5] arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp clk
      commit: 6edb323837909462d493f22c07a38a23ef44f944

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH v7 0/5] Update mdp clk to max supported value to support higher refresh rates

[Bjorn Andersson]

On Tue, 22 Mar 2022 08:57:06 +0530, Vinod Polimera wrote:
> Drop the assigned clock rate property and vote on the mdp clock to
> max frequency during bind/probe sequence.
> 
> Changes in v2:
> - Remove assigned-clock-rate property and set mdp clk during
> resume sequence.
> - Add fixes tag.
> 
> [...]

Applied, thanks!

[2/5] arm64: dts: qcom: sm7280: remove assigned-clock-rate property for mdp clk
      commit: 5241fd7fee9bee0cffa33f6d074194e94831e467
[3/5] arm64: dts: qcom: sm7180: remove assigned-clock-rate property for mdp clk
      commit: aa4ae511a760e66f22641d9b9b6052b469df3c10
[4/5] arm64: dts: qcom: sdm845: remove assigned-clock-rate property for mdp clk
      commit: 0b24829fd74cf954b3a02e9e4c4da3c098c69fbc
[5/5] arm64: dts: qcom: sm8250: remove assigned-clock-rate property for mdp clk
      commit: 6edb323837909462d493f22c07a38a23ef44f944

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>