* [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
` (12 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
external codecs using soundwire masters. Add these nodes for sc7280 based
platforms audio use case.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 128 +++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 40e700c..1065742 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2176,6 +2176,114 @@
#clock-cells = <1>;
};
+ lpass_rx_macro: codec@3200000 {
+ compatible = "qcom,sc7280-lpass-rx-macro";
+ reg = <0 0x03200000 0 0x1000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&lpass_va_macro>;
+ clock-names = "mclk", "npl", "fsgen";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names = "macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
+ swr0: soundwire@3210000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0 0x03210000 0 0x2000>;
+
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_rx_macro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <5>;
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ lpass_tx_macro: codec@3220000 {
+ compatible = "qcom,sc7280-lpass-tx-macro";
+ reg = <0 0x03220000 0 0x1000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&lpass_va_macro>;
+ clock-names = "mclk", "npl", "fsgen";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names = "macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
+ swr1: soundwire@3230000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0 0x03230000 0 0x2000>;
+
+ interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_tx_macro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <3>;
+ qcom,dout-ports = <0>;
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>;
+ qcom,port-offset = <1>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
lpass_audiocc: clock-controller@3300000 {
compatible = "qcom,sc7280-lpassaudiocc";
reg = <0 0x03300000 0 0x30000>;
@@ -2187,6 +2295,26 @@
#power-domain-cells = <1>;
};
+ lpass_va_macro: codec@3370000 {
+ compatible = "qcom,sc7280-lpass-va-macro";
+ reg = <0 0x03370000 0 0x1000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
+ clock-names = "mclk";
+
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+ <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ power-domain-names = "macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
lpass_aon: clock-controller@3380000 {
compatible = "qcom,sc7280-lpassaoncc";
reg = <0 0x03380000 0 0x30000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
` (11 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Enable rx, tx and va macro codecs and soundwire nodes on revision 3,
4 (aka CRD 1.0 and 2.0) and IDP boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index a74e0b7..3e87cd4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -246,6 +246,19 @@
modem-init;
};
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+ vdd-micb-supply = <&vreg_bob>;
+};
+
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
@@ -306,6 +319,28 @@
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&swr0 {
+ status = "okay";
+
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
&uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
` (10 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 22 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 22 ++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 859faaa..1c0bb7c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,28 @@
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+};
+
+&swr0 {
+ status = "okay";
+};
+
+&swr1 {
+ status = "okay";
+};
+
/* PINCTRL */
&lpass_dmic01_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4c25ffc..ee7d52a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -309,6 +309,10 @@
modem-init;
};
+&lpass_va_macro {
+ vdd-micb-supply = <&vreg_bob>;
+};
+
/* NOTE: Not all Qcards have eDP connector stuffed */
&mdss_edp {
vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
@@ -381,6 +385,24 @@
no-sdio;
};
+&swr0 {
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
uart_dbg: &uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (2 preceding siblings ...)
2022-07-07 13:22 ` [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
` (9 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add wcd9385 codec node for audio use case on sc7280 based platforms
of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards.
Add tlmm gpio property for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 14 ++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 41 ++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 344338a..9c21207 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,13 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
+&wcd9385 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+ pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+ us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
&tlmm {
tp_int_odl: tp-int-odl {
pins = "gpio7";
@@ -105,4 +112,11 @@ ap_ts_pen_1v8: &i2c13 {
function = "gpio";
bias-disable;
};
+
+ us_euro_hs_sel: us-euro-hs-sel {
+ pins = "gpio81";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 3e87cd4..1fbcb43 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -20,6 +20,34 @@
serial1 = &uart7;
};
+ wcd9385: audio-codec-1 {
+ compatible = "qcom,wcd9385-codec";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>;
+ pinctrl-1 = <&wcd_reset_n_sleep>;
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+ 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ #sound-dai-cells = <1>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -670,4 +698,17 @@
function = "gpio";
bias-pull-down;
};
+
+ wcd_reset_n: wcd-reset-n {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ };
+
+ wcd_reset_n_sleep: wcd-reset-n-sleep {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
};
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (3 preceding siblings ...)
2022-07-07 13:22 ` [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
` (8 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add wcd9385 codec node for audio use case on CRD rev5+ (aka CRD 3.0/3.1)
boards. Add tlmm gpio property for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 4 ++
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 51 ++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 1c0bb7c..6dfd497 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -27,6 +27,10 @@
status = "okay";
};
+&wcd9385 {
+ status = "okay";
+};
+
/* PINCTRL */
&lpass_dmic01_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index ee7d52a..7af8133 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -30,6 +30,37 @@
serial1 = &uart7;
};
+ wcd9385: audio-codec-1 {
+ compatible = "qcom,wcd9385-codec";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+ pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+ us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+ 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
pm8350c_pwm_backlight: backlight {
compatible = "pwm-backlight";
status = "disabled";
@@ -634,4 +665,24 @@ mos_bt_uart: &uart7 {
function = "gpio";
drive-strength = <2>;
};
+
+ us_euro_hs_sel: us-euro-hs-sel {
+ pins = "gpio81";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ wcd_reset_n: wcd-reset-n {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ };
+
+ wcd_reset_n_sleep: wcd-reset-n-sleep {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
};
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (4 preceding siblings ...)
2022-07-07 13:22 ` [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
` (7 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add max98360a codec node for audio use case on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards.
Add amp_en node for max98360a codec pin control.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 1fbcb43..e15d78e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -20,6 +20,14 @@
serial1 = &uart7;
};
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
wcd9385: audio-codec-1 {
compatible = "qcom,wcd9385-codec";
pinctrl-names = "default", "sleep";
@@ -613,6 +621,12 @@
};
&tlmm {
+ amp_en: amp-en {
+ pins = "gpio63";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
bt_en: bt-en {
pins = "gpio85";
function = "gpio";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (5 preceding siblings ...)
2022-07-07 13:22 ` [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
@ 2022-07-07 13:22 ` Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
` (6 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:22 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add max98360a codec node for audio use case on all herobrine boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index ed80081..c1ca791 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -296,6 +296,14 @@
/* BOARD-SPECIFIC TOP LEVEL NODES */
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
pwmleds: pwmleds {
compatible = "pwm-leds";
status = "disabled";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (6 preceding siblings ...)
2022-07-07 13:22 ` [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
@ 2022-07-07 13:23 ` Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
` (5 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:23 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add lpass cpu node for audio on sc7280 based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 62 ++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 1065742..14e6c4e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -22,6 +22,7 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -2336,6 +2337,67 @@
#power-domain-cells = <1>;
};
+ lpass_cpu: audio@3987000 {
+ compatible = "qcom,sc7280-lpass-cpu";
+
+ reg = <0 0x03987000 0 0x68000>,
+ <0 0x03b00000 0 0x29000>,
+ <0 0x03260000 0 0xc000>,
+ <0 0x03280000 0 0x29000>,
+ <0 0x03340000 0 0x29000>,
+ <0 0x0336c000 0 0x3000>;
+ reg-names = "lpass-hdmiif",
+ "lpass-lpaif",
+ "lpass-rxtx-cdc-dma-lpm",
+ "lpass-rxtx-lpaif",
+ "lpass-va-lpaif",
+ "lpass-va-cdc-dma-lpm";
+
+ iommus = <&apps_smmu 0x1820 0>,
+ <&apps_smmu 0x1821 0>,
+ <&apps_smmu 0x1832 0>;
+
+ power-domains = <&rpmhpd SC7280_LCX>;
+ power-domain-names = "lcx";
+ required-opps = <&rpmhpd_opp_nom>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+ <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
+ <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+ <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+ <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+ <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+ clock-names = "aon_cc_audio_hm_h",
+ "audio_cc_ext_mclk0",
+ "core_cc_sysnoc_mport_core",
+ "core_cc_ext_if0_ibit",
+ "core_cc_ext_if1_ibit",
+ "audio_cc_codec_mem",
+ "audio_cc_codec_mem0",
+ "audio_cc_codec_mem1",
+ "audio_cc_codec_mem2",
+ "aon_cc_va_mem0";
+
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif",
+ "lpass-irq-hdmi",
+ "lpass-irq-vaif",
+ "lpass-irq-rxtxif";
+
+ status = "disabled";
+ };
+
lpass_hm: clock-controller@3c00000 {
compatible = "qcom,sc7280-lpasshm";
reg = <0 0x3c00000 0 0x28>;
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards.
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (7 preceding siblings ...)
2022-07-07 13:23 ` [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
@ 2022-07-07 13:23 ` Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
` (4 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:23 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Enable lpass cpu node and add pin control and dai-links for audio on sc7280
based platforms of revision 3, 4 (aka CRD 1.0 and 2.0) and IDP boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index e15d78e..b8405d5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -282,6 +282,34 @@
modem-init;
};
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
&lpass_rx_macro {
status = "okay";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (8 preceding siblings ...)
2022-07-07 13:23 ` [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
@ 2022-07-07 13:23 ` Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
` (3 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:23 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Enable lpass cpu node and add pin control and dai-links for audio on
sc7280 based platforms of rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 6dfd497..989a895 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -7,6 +7,34 @@
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
&lpass_rx_macro {
status = "okay";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (9 preceding siblings ...)
2022-07-07 13:23 ` [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
@ 2022-07-07 13:23 ` Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
` (2 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:23 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add dt nodes for sound card support on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards, which is using WCD9385 headset
playback, capture, I2S speaker playback and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 +++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 98 ++++++++++++++++++++++++++++++
2 files changed, 121 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 9c21207..dddb505 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
+&sound {
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
&wcd9385 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index b8405d5..b3a5a2d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -85,6 +85,104 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
+
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
};
&apps_rsc {
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (10 preceding siblings ...)
2022-07-07 13:23 ` [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
@ 2022-07-07 13:23 ` Srinivasa Rao Mandadapu
2022-07-07 15:28 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Bjorn Andersson
2022-09-13 15:04 ` Bjorn Andersson
13 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-07 13:23 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao
Cc: Srinivasa Rao Mandadapu, Venkata Prasad Potturu
Add dt nodes for sound card support on rev5+ (aka CRD 3.0/3.1) boards,
which is using WCD9385 headset playback, capture, I2S speaker playback
and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 989a895..c72e53a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,107 @@
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
+/ {
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
+};
+
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
&lpass_cpu {
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v14 00/12] Add soundcard support for sc7280 based platforms.
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (11 preceding siblings ...)
2022-07-07 13:23 ` [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
@ 2022-07-07 15:28 ` Bjorn Andersson
2022-07-08 4:03 ` Srinivasa Rao Mandadapu
2022-09-13 15:04 ` Bjorn Andersson
13 siblings, 1 reply; 16+ messages in thread
From: Bjorn Andersson @ 2022-07-07 15:28 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu
Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao
On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote:
> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
> for audio on sc7280 based platforms.
>
> This patch set depends on:
> [LPASS DTS: wcd related pinmux reorg]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
> [Clock DTS: reset control changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
> [Clock: External MCLK and reset control driver changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
As far as I understand I can't apply this series until Taniya's clock
patches has been picked up?
> [Clock DTS: lpasscc node disable and lpasscore node name changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
You're the author of these 3 other patch sets, so why are you asking me
to stitch them together, instead of just sending me one series that I
can easily apply.
If you want your patches merged, make it easy for the maintainer to
merge them!
Regards,
Bjorn
>
> Changes Since V13:
> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
> -- Remove redundant output high setting in wcd reset node.
> -- Revert external mclk name.
> -- Update dependency list.
> -- Rebase as per latest kernel repository.
> Changes Since V12:
> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
> -- Update external mclk0 name and it's source node.
> -- Move sound node to separate wcd specific dtsi file.
> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
> -- Update dependency list.
> Changes Since V11:
> -- Remove output-low pinconf setting in wcd-reset-n-sleep node.
> -- Update dependency list.
> Changes Since V10:
> -- Modify digital macro codecs pin control labels.
> -- Updated dependency list.
> Changes Since V9:
> -- Move wcd codec and digital codec nodes to sc7280-qcard file.
> -- Modify the reg property as per link number in sound node.
> -- Fix the us-euro pin control usage in wcd codec node.
> -- Move wcd pin control nodes to specific crd board files.
> -- Sort max98360a codec node in alphabetical order.
> -- Modify the commit messages.
> Changes Since V8:
> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
> -- Add corresponding dt nodes for herobrine crd boards.
> -- Update dai-link node names as per dt-bindings in sound node.
> -- Add reg property in sound node as per dt-bindings which was removed in previous series.
> -- Fix typo errors.
> -- Update wcd codec pin control properties in board specific files.
> Changes Since V7:
> -- Remove redundant interrupt names in soundwire node.
> -- Fix typo errors.
> -- Remove redundant reg property in sound node.
> -- Rebased on top of latest kernel tip.
> Changes Since V6:
> -- Modify link-names and audio routing in a sound node.
> -- Move amp_en pin control node to appropriate consumer patch.
> -- Split patches as per digital macro codecs and board specific codecs and sort it.
> -- Modify label and node names to lpass specific.
> Changes Since V5:
> -- Move soc specific bolero digital codec nodes to soc specific file.
> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
> -- Change node name and remove redundant status property in sound node.
> Changes Since V4:
> -- Update nodes in sorting order.
> -- Update DTS node names as per dt-bindings.
> -- Update Node properties in proper order.
> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
> -- Remove redundant labels.
> -- Remove unused size cells and address cells in tx macro node.
> -- Keep all same nodes at one place, which are defined in same file.
> -- Add max98360a codec node to herobrine board specific targets.
> Changes Since V3:
> -- Move digital codec macro nodes to board specific dtsi file.
> -- Update pin controls in lpass cpu node.
> -- Update dependency patch list.
> -- Create patches on latest kernel.
> Changes Since V2:
> -- Add power domains to digital codec macro nodes.
> -- Change clock node usage in lpass cpu node.
> -- Add codec mem clock to lpass cpu node.
> -- Modify the node names to be generic.
> -- Move sound and codec nodes to root node.
> -- sort dai links as per reg.
> -- Fix typo errors.
> Changes Since V1:
> -- Update the commit message of cpu node patch.
> -- Add gpio control property to support Euro headset in wcd938x node.
> -- Fix clock properties in lpass cpu and digital codec macro node.
>
> Srinivasa Rao Mandadapu (12):
> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
> macro codecs
> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
> 1.0/2.0 and IDP boards
> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
> 3.0/3.1
> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
> IDP boards
> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
> boards
> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
> arm64: dts: qcom: sc7280: Add lpass cpu node
> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
> IDP boards.
> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
> boards
> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
>
> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
> 6 files changed, 679 insertions(+)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v14 00/12] Add soundcard support for sc7280 based platforms.
2022-07-07 15:28 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Bjorn Andersson
@ 2022-07-08 4:03 ` Srinivasa Rao Mandadapu
0 siblings, 0 replies; 16+ messages in thread
From: Srinivasa Rao Mandadapu @ 2022-07-08 4:03 UTC (permalink / raw)
To: Bjorn Andersson
Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao
On 7/7/2022 8:58 PM, Bjorn Andersson wrote:
Thanks for your time Bjorn!!!
> On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote:
>
>> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
>> for audio on sc7280 based platforms.
>>
>> This patch set depends on:
>> [LPASS DTS: wcd related pinmux reorg]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
>> [Clock DTS: reset control changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
>> [Clock: External MCLK and reset control driver changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
> As far as I understand I can't apply this series until Taniya's clock
> patches has been picked up?
Okay. It seems Taniya's patches also in final stage of review.
>
>> [Clock DTS: lpasscc node disable and lpasscore node name changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
> You're the author of these 3 other patch sets, so why are you asking me
> to stitch them together, instead of just sending me one series that I
> can easily apply.
Here 3 dependent patch series are of Clock Teams patches. only patch
from me is [
LPASS DTS: wcd related pinmux reorg] patch. Which is not dependent on any
other patch and can be applied directly as it's reviewed by. Will take care next
time and will combine patches wherever is possible.
>
> If you want your patches merged, make it easy for the maintainer to
> merge them!
Sure. Will take care next time. For Now will keep it as it is, as it's
independent patch and only one.
>
> Regards,
> Bjorn
>
>> Changes Since V13:
>> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
>> -- Remove redundant output high setting in wcd reset node.
>> -- Revert external mclk name.
>> -- Update dependency list.
>> -- Rebase as per latest kernel repository.
>> Changes Since V12:
>> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
>> -- Update external mclk0 name and it's source node.
>> -- Move sound node to separate wcd specific dtsi file.
>> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
>> -- Update dependency list.
>> Changes Since V11:
>> -- Remove output-low pinconf setting in wcd-reset-n-sleep node.
>> -- Update dependency list.
>> Changes Since V10:
>> -- Modify digital macro codecs pin control labels.
>> -- Updated dependency list.
>> Changes Since V9:
>> -- Move wcd codec and digital codec nodes to sc7280-qcard file.
>> -- Modify the reg property as per link number in sound node.
>> -- Fix the us-euro pin control usage in wcd codec node.
>> -- Move wcd pin control nodes to specific crd board files.
>> -- Sort max98360a codec node in alphabetical order.
>> -- Modify the commit messages.
>> Changes Since V8:
>> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
>> -- Add corresponding dt nodes for herobrine crd boards.
>> -- Update dai-link node names as per dt-bindings in sound node.
>> -- Add reg property in sound node as per dt-bindings which was removed in previous series.
>> -- Fix typo errors.
>> -- Update wcd codec pin control properties in board specific files.
>> Changes Since V7:
>> -- Remove redundant interrupt names in soundwire node.
>> -- Fix typo errors.
>> -- Remove redundant reg property in sound node.
>> -- Rebased on top of latest kernel tip.
>> Changes Since V6:
>> -- Modify link-names and audio routing in a sound node.
>> -- Move amp_en pin control node to appropriate consumer patch.
>> -- Split patches as per digital macro codecs and board specific codecs and sort it.
>> -- Modify label and node names to lpass specific.
>> Changes Since V5:
>> -- Move soc specific bolero digital codec nodes to soc specific file.
>> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
>> -- Change node name and remove redundant status property in sound node.
>> Changes Since V4:
>> -- Update nodes in sorting order.
>> -- Update DTS node names as per dt-bindings.
>> -- Update Node properties in proper order.
>> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
>> -- Remove redundant labels.
>> -- Remove unused size cells and address cells in tx macro node.
>> -- Keep all same nodes at one place, which are defined in same file.
>> -- Add max98360a codec node to herobrine board specific targets.
>> Changes Since V3:
>> -- Move digital codec macro nodes to board specific dtsi file.
>> -- Update pin controls in lpass cpu node.
>> -- Update dependency patch list.
>> -- Create patches on latest kernel.
>> Changes Since V2:
>> -- Add power domains to digital codec macro nodes.
>> -- Change clock node usage in lpass cpu node.
>> -- Add codec mem clock to lpass cpu node.
>> -- Modify the node names to be generic.
>> -- Move sound and codec nodes to root node.
>> -- sort dai links as per reg.
>> -- Fix typo errors.
>> Changes Since V1:
>> -- Update the commit message of cpu node patch.
>> -- Add gpio control property to support Euro headset in wcd938x node.
>> -- Fix clock properties in lpass cpu and digital codec macro node.
>>
>> Srinivasa Rao Mandadapu (12):
>> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
>> macro codecs
>> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
>> 1.0/2.0 and IDP boards
>> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
>> 3.0/3.1
>> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
>> IDP boards
>> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
>> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
>> boards
>> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
>> arm64: dts: qcom: sc7280: Add lpass cpu node
>> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
>> IDP boards.
>> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
>> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
>> boards
>> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
>>
>> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
>> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
>> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
>> 6 files changed, 679 insertions(+)
>>
>> --
>> 2.7.4
>>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v14 00/12] Add soundcard support for sc7280 based platforms.
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
` (12 preceding siblings ...)
2022-07-07 15:28 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Bjorn Andersson
@ 2022-09-13 15:04 ` Bjorn Andersson
13 siblings, 0 replies; 16+ messages in thread
From: Bjorn Andersson @ 2022-09-13 15:04 UTC (permalink / raw)
To: quic_srivasam, linux-arm-msm, agross, linux-kernel,
srinivas.kandagatla, swboyd, judyhsiao, robh+dt, dianders,
Bjorn Andersson, devicetree, quic_rohkumar
On Thu, 7 Jul 2022 18:52:52 +0530, Srinivasa Rao Mandadapu wrote:
> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
> for audio on sc7280 based platforms.
>
> This patch set depends on:
> [LPASS DTS: wcd related pinmux reorg]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
> [Clock DTS: reset control changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
> [Clock: External MCLK and reset control driver changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
> [Clock DTS: lpasscc node disable and lpasscore node name changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
>
> [...]
Applied, thanks!
[01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs
commit: 12ef689f09abb50f0862c8e08138dd45cbf27233
[02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards
commit: d3219de8bcebe4057696a2f99ce90c8812114c78
[03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1
commit: d5a959f96be1b27c81d6197d66624cd6cc146fe6
[04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards
commit: f8b4eb64f2003e0a1fa5011009955d46f90af285
[05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
commit: 0a3a56a93fd96cb3e3d42778f275e91750c242a7
[06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards
commit: d6c006f510d9f29ff78761bb3ef50f14ebc05b7b
[07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
commit: 14afeaf917375967bb84b4347cd8e4156b84c470
[08/12] arm64: dts: qcom: sc7280: Add lpass cpu node
commit: aee6873edb93a3919706f70884e55880d8c727a5
[09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards.
commit: 8cf4133bc1fbb6fbc695e4398b940caf3ec59ba5
[10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
commit: f10c73ac6e90ca2343fc4f06b61ce8c1824c9bfd
[11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards
commit: ece7d81f2447f4fd4f5d5345e921036871babf2b
[12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
commit: 29e0b604f040ef794cd36d43b97bd9c040ed99e6
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread