* [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
This introduces support for the SC8280XP platform in the MDSS, DPU and
DP driver. It reworks the HDP handling in the DP driver to support
external HPD sources - such as the dp-connector, or USB Type-C altmode.
It then introduces the display clock controllers, mdss, dpu and
displayport controllers and link everything together, for both the MDSS
instances on the platform, and lastly enables EDP on the compute
reference device and 6 of the MiniDP outputs on the automotive
development platform.
The patches was previously sent separately, but submitting them together
here as they (except dts addition) goes in the same tree.
Bjorn Andersson (12):
dt-bindings: display/msm: Add binding for SC8280XP MDSS
drm/msm/dpu: Introduce SC8280XP
drm/msm: Introduce SC8280XP MDSS
dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
drm/msm/dp: Stop using DP id as index in desc
drm/msm/dp: Add DP and EDP compatibles for SC8280XP
drm/msm/dp: Add SDM845 DisplayPort instance
drm/msm/dp: Rely on hpd_enable/disable callbacks
drm/msm/dp: Implement hpd_notify()
arm64: dts: qcom: sc8280xp: Define some of the display blocks
arm64: dts: qcom: sc8280xp-crd: Enable EDP
arm64: dts: qcom: sa8295-adp: Enable DP instances
.../bindings/display/msm/dp-controller.yaml | 3 +
.../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++
.../display/msm/qcom,sc8280xp-mdss.yaml | 143 +++
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++-
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 +++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 151 ++--
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
drivers/gpu/drm/msm/dp/dp_drm.c | 3 +
drivers/gpu/drm/msm/dp/dp_drm.h | 4 +
drivers/gpu/drm/msm/msm_drv.h | 1 +
drivers/gpu/drm/msm/msm_mdss.c | 4 +
18 files changed, 1770 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
--
2.37.3
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
This introduces support for the SC8280XP platform in the MDSS, DPU and
DP driver. It reworks the HDP handling in the DP driver to support
external HPD sources - such as the dp-connector, or USB Type-C altmode.
It then introduces the display clock controllers, mdss, dpu and
displayport controllers and link everything together, for both the MDSS
instances on the platform, and lastly enables EDP on the compute
reference device and 6 of the MiniDP outputs on the automotive
development platform.
The patches was previously sent separately, but submitting them together
here as they (except dts addition) goes in the same tree.
Bjorn Andersson (12):
dt-bindings: display/msm: Add binding for SC8280XP MDSS
drm/msm/dpu: Introduce SC8280XP
drm/msm: Introduce SC8280XP MDSS
dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
drm/msm/dp: Stop using DP id as index in desc
drm/msm/dp: Add DP and EDP compatibles for SC8280XP
drm/msm/dp: Add SDM845 DisplayPort instance
drm/msm/dp: Rely on hpd_enable/disable callbacks
drm/msm/dp: Implement hpd_notify()
arm64: dts: qcom: sc8280xp: Define some of the display blocks
arm64: dts: qcom: sc8280xp-crd: Enable EDP
arm64: dts: qcom: sa8295-adp: Enable DP instances
.../bindings/display/msm/dp-controller.yaml | 3 +
.../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++
.../display/msm/qcom,sc8280xp-mdss.yaml | 143 +++
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++-
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 +++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 151 ++--
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
drivers/gpu/drm/msm/dp/dp_drm.c | 3 +
drivers/gpu/drm/msm/dp/dp_drm.h | 4 +
drivers/gpu/drm/msm/msm_drv.h | 1 +
drivers/gpu/drm/msm/msm_mdss.c | 4 +
18 files changed, 1770 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
--
2.37.3
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v5 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add binding for the display subsystem and display processing unit in the
Qualcomm SC8280XP platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v4:
- None
.../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++++++++++++++
.../display/msm/qcom,sc8280xp-mdss.yaml | 143 ++++++++++++++++++
2 files changed, 265 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 000000000000..f2c8e16cf067
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 000000000000..b67e7874ed56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add binding for the display subsystem and display processing unit in the
Qualcomm SC8280XP platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v4:
- None
.../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++++++++++++++
.../display/msm/qcom,sc8280xp-mdss.yaml | 143 ++++++++++++++++++
2 files changed, 265 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 000000000000..f2c8e16cf067
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 000000000000..b67e7874ed56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
necessary definitions and describe the DPU in the SC8280XP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- Fix highest_bank_bit, based on downstream
- Add ubwc_swizzle
- Use CTL_SC7280_MASK instead of listing the bits directly
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/msm_drv.h | 1 +
7 files changed, 243 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 2196e205efa5..0315fe68af2f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -124,6 +124,19 @@
BIT(MDP_AD4_0_INTR) | \
BIT(MDP_AD4_1_INTR))
+#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_7xxx_INTR) | \
+ BIT(MDP_INTF1_7xxx_INTR) | \
+ BIT(MDP_INTF2_7xxx_INTR) | \
+ BIT(MDP_INTF3_7xxx_INTR) | \
+ BIT(MDP_INTF4_7xxx_INTR) | \
+ BIT(MDP_INTF5_7xxx_INTR) | \
+ BIT(MDP_INTF6_7xxx_INTR) | \
+ BIT(MDP_INTF7_7xxx_INTR) | \
+ BIT(MDP_INTF8_7xxx_INTR))
+
#define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
BIT(DPU_WB_UBWC) | \
BIT(DPU_WB_YUV_CONFIG) | \
@@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
.max_vdeci_exp = MAX_VERT_DECIMATION,
};
+static const struct dpu_caps sc8280xp_dpu_caps = {
+ .max_mixer_width = 2560,
+ .max_mixer_blendstages = 11,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 5120,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_caps sm8250_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
@@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .highest_bank_bit = 2,
+ .ubwc_swizzle = 6,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
+ },
+};
+
static const struct dpu_mdp_cfg qcm2290_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
},
};
+static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+ {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ },
+ {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
static const struct dpu_ctl_cfg sm8150_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
@@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
+ _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
+ _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
+ _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
+ _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
+
+static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
+ SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
+ SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+ SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+};
#define _VIG_SBLK_NOSCALE(num, sdma_pri) \
{ \
@@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
&sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
};
+/* SC8280XP */
+
+static const struct dpu_lm_cfg sc8280xp_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
+ LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
+ LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
+ LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
+ LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
+};
+
/* SM8150 */
static const struct dpu_lm_cfg sm8150_lm[] = {
@@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
};
+static struct dpu_pingpong_cfg sc8280xp_pp[] = {
+ PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
+ PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
+ PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
+ PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
+ PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
+ PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
+};
+
static const struct dpu_pingpong_cfg sm8150_pp[] = {
PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
};
+static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
+ MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+ MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+ MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+};
+
/*************************************************************
* DSC sub blocks config
*************************************************************/
@@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
};
+/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
+static const struct dpu_intf_cfg sc8280xp_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+ INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+ INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+ INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
+ INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
+ INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
+ INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
+ INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
+};
+
static const struct dpu_intf_cfg qcm2290_intf[] = {
INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
},
};
+static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
+ .base = 0x0,
+ .version = 0x00020000,
+ .trigger_sel_off = 0x119c,
+ .xin_id = 7,
+ .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
+};
+
static const struct dpu_reg_dma_cfg sdm845_regdma = {
.base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
};
@@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
.min_llcc_ib = 800000,
.min_dram_ib = 800000,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_perf_cfg sc8280xp_perf_data = {
+ .max_bw_low = 13600000,
+ .max_bw_high = 18200000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 800000,
+ .danger_lut_tbl = {0xf, 0xffff, 0x0},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
.entries = sc8180x_qos_linear
@@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
.mdss_irqs = IRQ_SC8180X_MASK,
};
+static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
+ .caps = &sc8280xp_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
+ .mdp = sc8280xp_mdp,
+ .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
+ .ctl = sc8280xp_ctl,
+ .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
+ .sspp = sc8280xp_sspp,
+ .mixer_count = ARRAY_SIZE(sc8280xp_lm),
+ .mixer = sc8280xp_lm,
+ .dspp_count = ARRAY_SIZE(sm8150_dspp),
+ .dspp = sm8150_dspp,
+ .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
+ .pingpong = sc8280xp_pp,
+ .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
+ .merge_3d = sc8280xp_merge_3d,
+ .intf_count = ARRAY_SIZE(sc8280xp_intf),
+ .intf = sc8280xp_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sc8280xp_perf_data,
+ .mdss_irqs = IRQ_SC8280XP_MASK,
+};
+
static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
.caps = &sm8250_dpu_caps,
.mdp_count = ARRAY_SIZE(sm8250_mdp),
@@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
};
const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 3b645d5aa9aa..6897b35c18fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -47,6 +47,7 @@
#define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
+#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
#define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index cf1b6d84c18a..27d74c4d8a98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -35,6 +35,9 @@
#define MDP_INTF_3_OFF_REV_7xxx 0x37000
#define MDP_INTF_4_OFF_REV_7xxx 0x38000
#define MDP_INTF_5_OFF_REV_7xxx 0x39000
+#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
+#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
+#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
/**
* struct dpu_intr_reg - array of DPU register sets
@@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
},
+ [MDP_INTF6_7xxx_INTR] = {
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
+ [MDP_INTF7_7xxx_INTR] = {
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
+ [MDP_INTF8_7xxx_INTR] = {
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
};
#define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 46443955443c..425465011c80 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
MDP_INTF3_7xxx_INTR,
MDP_INTF4_7xxx_INTR,
MDP_INTF5_7xxx_INTR,
+ MDP_INTF6_7xxx_INTR,
+ MDP_INTF7_7xxx_INTR,
+ MDP_INTF8_7xxx_INTR,
MDP_INTR_MAX,
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index d3b0ed0a9c6c..d595096a4b1f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -214,6 +214,8 @@ enum dpu_intf {
INTF_4,
INTF_5,
INTF_6,
+ INTF_7,
+ INTF_8,
INTF_MAX
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index b71199511a52..30f894864cca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc7180-dpu", },
{ .compatible = "qcom,sc7280-dpu", },
{ .compatible = "qcom,sc8180x-dpu", },
+ { .compatible = "qcom,sc8280xp-dpu", },
{ .compatible = "qcom,sm6115-dpu", },
{ .compatible = "qcom,sm8150-dpu", },
{ .compatible = "qcom,sm8250-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index d4e0ef608950..b2789efd59e8 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -61,6 +61,7 @@ enum msm_dp_controller {
MSM_DP_CONTROLLER_0,
MSM_DP_CONTROLLER_1,
MSM_DP_CONTROLLER_2,
+ MSM_DP_CONTROLLER_3,
MSM_DP_CONTROLLER_COUNT,
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
necessary definitions and describe the DPU in the SC8280XP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- Fix highest_bank_bit, based on downstream
- Add ubwc_swizzle
- Use CTL_SC7280_MASK instead of listing the bits directly
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
.../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/msm_drv.h | 1 +
7 files changed, 243 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 2196e205efa5..0315fe68af2f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -124,6 +124,19 @@
BIT(MDP_AD4_0_INTR) | \
BIT(MDP_AD4_1_INTR))
+#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_7xxx_INTR) | \
+ BIT(MDP_INTF1_7xxx_INTR) | \
+ BIT(MDP_INTF2_7xxx_INTR) | \
+ BIT(MDP_INTF3_7xxx_INTR) | \
+ BIT(MDP_INTF4_7xxx_INTR) | \
+ BIT(MDP_INTF5_7xxx_INTR) | \
+ BIT(MDP_INTF6_7xxx_INTR) | \
+ BIT(MDP_INTF7_7xxx_INTR) | \
+ BIT(MDP_INTF8_7xxx_INTR))
+
#define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
BIT(DPU_WB_UBWC) | \
BIT(DPU_WB_YUV_CONFIG) | \
@@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
.max_vdeci_exp = MAX_VERT_DECIMATION,
};
+static const struct dpu_caps sc8280xp_dpu_caps = {
+ .max_mixer_width = 2560,
+ .max_mixer_blendstages = 11,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 5120,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_caps sm8250_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
@@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .highest_bank_bit = 2,
+ .ubwc_swizzle = 6,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
+ },
+};
+
static const struct dpu_mdp_cfg qcm2290_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
},
};
+static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+ {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ },
+ {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x204,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
static const struct dpu_ctl_cfg sm8150_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
@@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
+ _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
+ _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
+ _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
+ _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
+
+static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
+ SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
+ SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
+ sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+ SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+};
#define _VIG_SBLK_NOSCALE(num, sdma_pri) \
{ \
@@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
&sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
};
+/* SC8280XP */
+
+static const struct dpu_lm_cfg sc8280xp_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
+ LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
+ LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
+ LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
+ LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
+};
+
/* SM8150 */
static const struct dpu_lm_cfg sm8150_lm[] = {
@@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
};
+static struct dpu_pingpong_cfg sc8280xp_pp[] = {
+ PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
+ PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
+ PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
+ PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
+ PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
+ PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
+};
+
static const struct dpu_pingpong_cfg sm8150_pp[] = {
PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
};
+static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
+ MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+ MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+ MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+};
+
/*************************************************************
* DSC sub blocks config
*************************************************************/
@@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
};
+/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
+static const struct dpu_intf_cfg sc8280xp_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+ INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+ INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+ INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
+ INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
+ INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
+ INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
+ INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
+};
+
static const struct dpu_intf_cfg qcm2290_intf[] = {
INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
},
};
+static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
+ .base = 0x0,
+ .version = 0x00020000,
+ .trigger_sel_off = 0x119c,
+ .xin_id = 7,
+ .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
+};
+
static const struct dpu_reg_dma_cfg sdm845_regdma = {
.base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
};
@@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
.min_llcc_ib = 800000,
.min_dram_ib = 800000,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_perf_cfg sc8280xp_perf_data = {
+ .max_bw_low = 13600000,
+ .max_bw_high = 18200000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 800000,
+ .danger_lut_tbl = {0xf, 0xffff, 0x0},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
.entries = sc8180x_qos_linear
@@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
.mdss_irqs = IRQ_SC8180X_MASK,
};
+static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
+ .caps = &sc8280xp_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
+ .mdp = sc8280xp_mdp,
+ .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
+ .ctl = sc8280xp_ctl,
+ .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
+ .sspp = sc8280xp_sspp,
+ .mixer_count = ARRAY_SIZE(sc8280xp_lm),
+ .mixer = sc8280xp_lm,
+ .dspp_count = ARRAY_SIZE(sm8150_dspp),
+ .dspp = sm8150_dspp,
+ .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
+ .pingpong = sc8280xp_pp,
+ .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
+ .merge_3d = sc8280xp_merge_3d,
+ .intf_count = ARRAY_SIZE(sc8280xp_intf),
+ .intf = sc8280xp_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sc8280xp_perf_data,
+ .mdss_irqs = IRQ_SC8280XP_MASK,
+};
+
static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
.caps = &sm8250_dpu_caps,
.mdp_count = ARRAY_SIZE(sm8250_mdp),
@@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
};
const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 3b645d5aa9aa..6897b35c18fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -47,6 +47,7 @@
#define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
+#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
#define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index cf1b6d84c18a..27d74c4d8a98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -35,6 +35,9 @@
#define MDP_INTF_3_OFF_REV_7xxx 0x37000
#define MDP_INTF_4_OFF_REV_7xxx 0x38000
#define MDP_INTF_5_OFF_REV_7xxx 0x39000
+#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
+#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
+#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
/**
* struct dpu_intr_reg - array of DPU register sets
@@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
},
+ [MDP_INTF6_7xxx_INTR] = {
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
+ [MDP_INTF7_7xxx_INTR] = {
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
+ [MDP_INTF8_7xxx_INTR] = {
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
+ MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
+ },
};
#define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 46443955443c..425465011c80 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
MDP_INTF3_7xxx_INTR,
MDP_INTF4_7xxx_INTR,
MDP_INTF5_7xxx_INTR,
+ MDP_INTF6_7xxx_INTR,
+ MDP_INTF7_7xxx_INTR,
+ MDP_INTF8_7xxx_INTR,
MDP_INTR_MAX,
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index d3b0ed0a9c6c..d595096a4b1f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -214,6 +214,8 @@ enum dpu_intf {
INTF_4,
INTF_5,
INTF_6,
+ INTF_7,
+ INTF_8,
INTF_MAX
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index b71199511a52..30f894864cca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc7180-dpu", },
{ .compatible = "qcom,sc7280-dpu", },
{ .compatible = "qcom,sc8180x-dpu", },
+ { .compatible = "qcom,sc8280xp-dpu", },
{ .compatible = "qcom,sm6115-dpu", },
{ .compatible = "qcom,sm8150-dpu", },
{ .compatible = "qcom,sm8250-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index d4e0ef608950..b2789efd59e8 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -61,6 +61,7 @@ enum msm_dp_controller {
MSM_DP_CONTROLLER_0,
MSM_DP_CONTROLLER_1,
MSM_DP_CONTROLLER_2,
+ MSM_DP_CONTROLLER_3,
MSM_DP_CONTROLLER_COUNT,
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 03/12] drm/msm: Introduce SC8280XP MDSS
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatible for the SC8280XP Mobile Display Subsystem and
initialization for version 8.0.0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- None
drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 86b28add1fff..8677e74868cf 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -287,6 +287,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
case DPU_HW_VER_720:
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
break;
+ case DPU_HW_VER_800:
+ msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
+ break;
}
return ret;
@@ -513,6 +516,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sc7180-mdss" },
{ .compatible = "qcom,sc7280-mdss" },
{ .compatible = "qcom,sc8180x-mdss" },
+ { .compatible = "qcom,sc8280xp-mdss" },
{ .compatible = "qcom,sm6115-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
{ .compatible = "qcom,sm8250-mdss" },
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 03/12] drm/msm: Introduce SC8280XP MDSS
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatible for the SC8280XP Mobile Display Subsystem and
initialization for version 8.0.0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- None
drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 86b28add1fff..8677e74868cf 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -287,6 +287,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
case DPU_HW_VER_720:
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
break;
+ case DPU_HW_VER_800:
+ msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
+ break;
}
return ret;
@@ -513,6 +516,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sc7180-mdss" },
{ .compatible = "qcom,sc7280-mdss" },
{ .compatible = "qcom,sc8180x-mdss" },
+ { .compatible = "qcom,sc8280xp-mdss" },
{ .compatible = "qcom,sm6115-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
{ .compatible = "qcom,sm8250-mdss" },
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
Qualcomm SDM845 and SC8280XP platforms.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v4:
- None
.../devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af8256f..a1dc3a13e1cf 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -21,6 +21,9 @@ properties:
- qcom,sc7280-edp
- qcom,sc8180x-dp
- qcom,sc8180x-edp
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+ - qcom,sdm845-dp
- qcom,sm8350-dp
reg:
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
Qualcomm SDM845 and SC8280XP platforms.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v4:
- None
.../devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af8256f..a1dc3a13e1cf 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -21,6 +21,9 @@ properties:
- qcom,sc7280-edp
- qcom,sc8180x-dp
- qcom,sc8180x-edp
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+ - qcom,sdm845-dp
- qcom,sm8350-dp
reg:
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 05/12] drm/msm/dp: Stop using DP id as index in desc
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.
By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.
While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
1 file changed, 25 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 7ff60e5ff325..eeb292f1ad1b 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -122,61 +122,41 @@ struct dp_display_private {
struct msm_dp_desc {
phys_addr_t io_start;
+ unsigned int id;
unsigned int connector_type;
bool wide_bus_en;
};
-struct msm_dp_config {
- const struct msm_dp_desc *descs;
- size_t num_descs;
-};
-
static const struct msm_dp_desc sc7180_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sc7180_dp_cfg = {
- .descs = sc7180_dp_descs,
- .num_descs = ARRAY_SIZE(sc7180_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct msm_dp_desc sc7280_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
-};
-
-static const struct msm_dp_config sc7280_dp_cfg = {
- .descs = sc7280_dp_descs,
- .num_descs = ARRAY_SIZE(sc7280_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ {}
};
static const struct msm_dp_desc sc8180x_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
-};
-
-static const struct msm_dp_config sc8180x_dp_cfg = {
- .descs = sc8180x_dp_descs,
- .num_descs = ARRAY_SIZE(sc8180x_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
+ {}
};
static const struct msm_dp_desc sm8350_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sm8350_dp_cfg = {
- .descs = sm8350_dp_descs,
- .num_descs = ARRAY_SIZE(sm8350_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct of_device_id dp_dt_match[] = {
- { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
- { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
+ { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
+ { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
@@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
return 0;
}
-static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
- unsigned int *id)
+static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
{
- const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
+ const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
struct resource *res;
int i;
@@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
if (!res)
return NULL;
- for (i = 0; i < cfg->num_descs; i++) {
- if (cfg->descs[i].io_start == res->start) {
- *id = i;
- return &cfg->descs[i];
- }
+ for (i = 0; i < descs[i].io_start; i++) {
+ if (descs[i].io_start == res->start)
+ return &descs[i];
}
dev_err(&pdev->dev, "unknown displayport instance\n");
@@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
if (!dp)
return -ENOMEM;
- desc = dp_display_get_desc(pdev, &dp->id);
+ desc = dp_display_get_desc(pdev);
if (!desc)
return -EINVAL;
dp->pdev = pdev;
dp->name = "drm_dp";
+ dp->id = desc->id;
dp->dp_display.connector_type = desc->connector_type;
dp->wide_bus_en = desc->wide_bus_en;
dp->dp_display.is_edp =
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 05/12] drm/msm/dp: Stop using DP id as index in desc
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.
By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.
While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
1 file changed, 25 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 7ff60e5ff325..eeb292f1ad1b 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -122,61 +122,41 @@ struct dp_display_private {
struct msm_dp_desc {
phys_addr_t io_start;
+ unsigned int id;
unsigned int connector_type;
bool wide_bus_en;
};
-struct msm_dp_config {
- const struct msm_dp_desc *descs;
- size_t num_descs;
-};
-
static const struct msm_dp_desc sc7180_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sc7180_dp_cfg = {
- .descs = sc7180_dp_descs,
- .num_descs = ARRAY_SIZE(sc7180_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct msm_dp_desc sc7280_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
-};
-
-static const struct msm_dp_config sc7280_dp_cfg = {
- .descs = sc7280_dp_descs,
- .num_descs = ARRAY_SIZE(sc7280_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ {}
};
static const struct msm_dp_desc sc8180x_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- [MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
-};
-
-static const struct msm_dp_config sc8180x_dp_cfg = {
- .descs = sc8180x_dp_descs,
- .num_descs = ARRAY_SIZE(sc8180x_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
+ {}
};
static const struct msm_dp_desc sm8350_dp_descs[] = {
- [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sm8350_dp_cfg = {
- .descs = sm8350_dp_descs,
- .num_descs = ARRAY_SIZE(sm8350_dp_descs),
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ {}
};
static const struct of_device_id dp_dt_match[] = {
- { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
- { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
- { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
- { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
+ { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
+ { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
+ { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
@@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
return 0;
}
-static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
- unsigned int *id)
+static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
{
- const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
+ const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
struct resource *res;
int i;
@@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
if (!res)
return NULL;
- for (i = 0; i < cfg->num_descs; i++) {
- if (cfg->descs[i].io_start == res->start) {
- *id = i;
- return &cfg->descs[i];
- }
+ for (i = 0; i < descs[i].io_start; i++) {
+ if (descs[i].io_start == res->start)
+ return &descs[i];
}
dev_err(&pdev->dev, "unknown displayport instance\n");
@@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
if (!dp)
return -ENOMEM;
- desc = dp_display_get_desc(pdev, &dp->id);
+ desc = dp_display_get_desc(pdev);
if (!desc)
return -EINVAL;
dp->pdev = pdev;
dp->name = "drm_dp";
+ dp->id = desc->id;
dp->dp_display.connector_type = desc->connector_type;
dp->wide_bus_en = desc->wide_bus_en;
dp->dp_display.is_edp =
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.
The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index eeb292f1ad1b..5b7f1f885b2f 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -145,6 +145,26 @@ static const struct msm_dp_desc sc8180x_dp_descs[] = {
{}
};
+static const struct msm_dp_desc sc8280xp_dp_descs[] = {
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ {}
+};
+
+static const struct msm_dp_desc sc8280xp_edp_descs[] = {
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ {}
+};
+
static const struct msm_dp_desc sm8350_dp_descs[] = {
{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
{}
@@ -156,6 +176,8 @@ static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
+ { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.
The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index eeb292f1ad1b..5b7f1f885b2f 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -145,6 +145,26 @@ static const struct msm_dp_desc sc8180x_dp_descs[] = {
{}
};
+static const struct msm_dp_desc sc8280xp_dp_descs[] = {
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+ {}
+};
+
+static const struct msm_dp_desc sc8280xp_edp_descs[] = {
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+ {}
+};
+
static const struct msm_dp_desc sm8350_dp_descs[] = {
{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
{}
@@ -156,6 +176,8 @@ static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+ { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
+ { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 07/12] drm/msm/dp: Add SDM845 DisplayPort instance
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5b7f1f885b2f..666b45c8ab80 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -178,6 +178,7 @@ static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
+ { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 07/12] drm/msm/dp: Add SDM845 DisplayPort instance
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 5b7f1f885b2f..666b45c8ab80 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -178,6 +178,7 @@ static const struct of_device_id dp_dt_match[] = {
{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
+ { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
{}
};
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller. In other configurations the HPD notification
might be delivered by the DRM framework from an associated bridge.
This difference is not appropriately represented by the "is_edp"
boolean, but is properly represented by the frameworks invocation of the
hpd_enable() and hpd_disable() callbacks. Switch the current condition
to rely on these callbacks instead.
This ensures appropriate handling of the three cases; no bridge
connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
DRM_BRIDGE_OP_HPD.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- Reordered the hpd_enable/disable patch earlier
- Squashed in internal_hpd conditional changes into the same patch
drivers/gpu/drm/msm/dp/dp_display.c | 40 +++++++++++++++++++++--------
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
drivers/gpu/drm/msm/dp/dp_drm.c | 2 ++
drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
4 files changed, 35 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 666b45c8ab80..095adf528e43 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
}
/* enable HDP irq_hpd/replug interrupt */
- dp_catalog_hpd_config_intr(dp->catalog,
- DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog,
+ DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+ true);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
dp->dp_display.connector_type, state);
@@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp->dp_display.connector_type, state);
/* disable irq_hpd/replug interrupts */
- dp_catalog_hpd_config_intr(dp->catalog,
- DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog,
+ DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+ false);
/* unplugged, no more irq_hpd handle */
dp_del_event(dp, EV_IRQ_HPD_INT);
@@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
}
/* disable HPD plug interrupts */
- dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
/*
* We don't need separate work for disconnect as
@@ -696,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp_display_handle_plugged_change(&dp->dp_display, false);
/* enable HDP plug interrupt to prepare for next plugin */
- if (!dp->dp_display.is_edp)
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
@@ -1081,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
dp_display_host_init(dp);
dp_catalog_ctrl_hpd_config(dp->catalog);
- /* Enable plug and unplug interrupts only for external DisplayPort */
- if (!dp->dp_display.is_edp)
+ /* Enable plug and unplug interrupts only if requested */
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1374,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
dp_catalog_ctrl_hpd_config(dp->catalog);
-
- if (!dp->dp_display.is_edp)
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1772,3 +1776,19 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
dp_display->dp_mode.h_active_low =
!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
}
+
+void dp_bridge_hpd_enable(struct drm_bridge *bridge)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+
+ dp_display->internal_hpd = true;
+}
+
+void dp_bridge_hpd_disable(struct drm_bridge *bridge)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+
+ dp_display->internal_hpd = false;
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index dcedf021f7fe..371337d0fae2 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -21,6 +21,7 @@ struct msm_dp {
bool power_on;
unsigned int connector_type;
bool is_edp;
+ bool internal_hpd;
hdmi_codec_plugged_cb plugged_cb;
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index 6db82f9b03af..9d03b6ee3c41 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -102,6 +102,8 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
.get_modes = dp_bridge_get_modes,
.detect = dp_bridge_detect,
.atomic_check = dp_bridge_atomic_check,
+ .hpd_enable = dp_bridge_hpd_enable,
+ .hpd_disable = dp_bridge_hpd_disable,
};
struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
index 82035dbb0578..1f871b555006 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.h
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -32,5 +32,7 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode);
+void dp_bridge_hpd_enable(struct drm_bridge *bridge);
+void dp_bridge_hpd_disable(struct drm_bridge *bridge);
#endif /* _DP_DRM_H_ */
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller. In other configurations the HPD notification
might be delivered by the DRM framework from an associated bridge.
This difference is not appropriately represented by the "is_edp"
boolean, but is properly represented by the frameworks invocation of the
hpd_enable() and hpd_disable() callbacks. Switch the current condition
to rely on these callbacks instead.
This ensures appropriate handling of the three cases; no bridge
connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
DRM_BRIDGE_OP_HPD.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- Reordered the hpd_enable/disable patch earlier
- Squashed in internal_hpd conditional changes into the same patch
drivers/gpu/drm/msm/dp/dp_display.c | 40 +++++++++++++++++++++--------
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
drivers/gpu/drm/msm/dp/dp_drm.c | 2 ++
drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
4 files changed, 35 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 666b45c8ab80..095adf528e43 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
}
/* enable HDP irq_hpd/replug interrupt */
- dp_catalog_hpd_config_intr(dp->catalog,
- DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog,
+ DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+ true);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
dp->dp_display.connector_type, state);
@@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp->dp_display.connector_type, state);
/* disable irq_hpd/replug interrupts */
- dp_catalog_hpd_config_intr(dp->catalog,
- DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog,
+ DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+ false);
/* unplugged, no more irq_hpd handle */
dp_del_event(dp, EV_IRQ_HPD_INT);
@@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
}
/* disable HPD plug interrupts */
- dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
+ if (dp->dp_display.internal_hpd)
+ dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
/*
* We don't need separate work for disconnect as
@@ -696,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp_display_handle_plugged_change(&dp->dp_display, false);
/* enable HDP plug interrupt to prepare for next plugin */
- if (!dp->dp_display.is_edp)
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
@@ -1081,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
dp_display_host_init(dp);
dp_catalog_ctrl_hpd_config(dp->catalog);
- /* Enable plug and unplug interrupts only for external DisplayPort */
- if (!dp->dp_display.is_edp)
+ /* Enable plug and unplug interrupts only if requested */
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1374,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
dp_catalog_ctrl_hpd_config(dp->catalog);
-
- if (!dp->dp_display.is_edp)
+ if (dp->dp_display.internal_hpd)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1772,3 +1776,19 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
dp_display->dp_mode.h_active_low =
!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
}
+
+void dp_bridge_hpd_enable(struct drm_bridge *bridge)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+
+ dp_display->internal_hpd = true;
+}
+
+void dp_bridge_hpd_disable(struct drm_bridge *bridge)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+
+ dp_display->internal_hpd = false;
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index dcedf021f7fe..371337d0fae2 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -21,6 +21,7 @@ struct msm_dp {
bool power_on;
unsigned int connector_type;
bool is_edp;
+ bool internal_hpd;
hdmi_codec_plugged_cb plugged_cb;
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index 6db82f9b03af..9d03b6ee3c41 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -102,6 +102,8 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
.get_modes = dp_bridge_get_modes,
.detect = dp_bridge_detect,
.atomic_check = dp_bridge_atomic_check,
+ .hpd_enable = dp_bridge_hpd_enable,
+ .hpd_disable = dp_bridge_hpd_disable,
};
struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
index 82035dbb0578..1f871b555006 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.h
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -32,5 +32,7 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode);
+void dp_bridge_hpd_enable(struct drm_bridge *bridge);
+void dp_bridge_hpd_disable(struct drm_bridge *bridge);
#endif /* _DP_DRM_H_ */
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 09/12] drm/msm/dp: Implement hpd_notify()
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.
For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.
This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- Look at internal_hpd now that it's introduced before this patch.
drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
drivers/gpu/drm/msm/dp/dp_drm.c | 1 +
drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
3 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 095adf528e43..0bee412603fe 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1792,3 +1792,25 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
dp_display->internal_hpd = false;
}
+
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+ enum drm_connector_status status)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+ struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+ /* Without next_bridge interrupts are handled by the DP core directly */
+ if (dp_display->internal_hpd)
+ return;
+
+ if (!dp->core_initialized) {
+ drm_dbg_dp(dp->drm_dev, "not initialized\n");
+ return;
+ }
+
+ if (!dp_display->is_connected && status == connector_status_connected)
+ dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
+ else if (dp_display->is_connected && status == connector_status_disconnected)
+ dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index 9d03b6ee3c41..275370f21115 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -104,6 +104,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
.atomic_check = dp_bridge_atomic_check,
.hpd_enable = dp_bridge_hpd_enable,
.hpd_disable = dp_bridge_hpd_disable,
+ .hpd_notify = dp_bridge_hpd_notify,
};
struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
index 1f871b555006..250f7c66201f 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.h
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -34,5 +34,7 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
const struct drm_display_mode *adjusted_mode);
void dp_bridge_hpd_enable(struct drm_bridge *bridge);
void dp_bridge_hpd_disable(struct drm_bridge *bridge);
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+ enum drm_connector_status status);
#endif /* _DP_DRM_H_ */
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 09/12] drm/msm/dp: Implement hpd_notify()
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.
For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.
This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
- Look at internal_hpd now that it's introduced before this patch.
drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
drivers/gpu/drm/msm/dp/dp_drm.c | 1 +
drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
3 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 095adf528e43..0bee412603fe 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1792,3 +1792,25 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
dp_display->internal_hpd = false;
}
+
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+ enum drm_connector_status status)
+{
+ struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+ struct msm_dp *dp_display = dp_bridge->dp_display;
+ struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+ /* Without next_bridge interrupts are handled by the DP core directly */
+ if (dp_display->internal_hpd)
+ return;
+
+ if (!dp->core_initialized) {
+ drm_dbg_dp(dp->drm_dev, "not initialized\n");
+ return;
+ }
+
+ if (!dp_display->is_connected && status == connector_status_connected)
+ dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
+ else if (dp_display->is_connected && status == connector_status_disconnected)
+ dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index 9d03b6ee3c41..275370f21115 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -104,6 +104,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
.atomic_check = dp_bridge_atomic_check,
.hpd_enable = dp_bridge_hpd_enable,
.hpd_disable = dp_bridge_hpd_disable,
+ .hpd_notify = dp_bridge_hpd_notify,
};
struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
index 1f871b555006..250f7c66201f 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.h
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -34,5 +34,7 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
const struct drm_display_mode *adjusted_mode);
void dp_bridge_hpd_enable(struct drm_bridge *bridge);
void dp_bridge_hpd_disable(struct drm_bridge *bridge);
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+ enum drm_connector_status status);
#endif /* _DP_DRM_H_ */
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
1 file changed, 838 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 9f3132ac2857..c2f186495506 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4,6 +4,7 @@
* Copyright (c) 2022, Linaro Limited
*/
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
status = "disabled";
};
+ mdss1_dp0_phy: phy@8909a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x08909a00 0 0x19c>,
+ <0 0x08909200 0 0xec>,
+ <0 0x08909600 0 0xec>,
+ <0 0x08909000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss1_dp1_phy: phy@890ca00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0890ca00 0 0x19c>,
+ <0 0x0890c200 0 0xec>,
+ <0 0x0890c600 0 0xec>,
+ <0 0x0890c000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
system-cache-controller@9200000 {
compatible = "qcom,sc8280xp-llcc";
reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
@@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
};
};
+ mdss0: display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss0_mdp: display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@5 {
+ reg = <5>;
+ mdss0_intf5_out: endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ mdss0_intf6_out: endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss0_dp2: displayport-controller@ae9a000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0xae9a000 0 0x200>,
+ <0 0xae9a200 0 0x200>,
+ <0 0xae9a400 0 0x600>,
+ <0 0xae9b000 0 0x400>;
+ interrupt-parent = <&mdss0>;
+ interrupts = <14>;
+ clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+
+ phys = <&mdss0_dp2_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss0_dp2_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp2_in: endpoint {
+ remote-endpoint = <&mdss0_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss0_dp2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss0_dp3: displayport-controller@aea0000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0xaea0000 0 0x200>,
+ <0 0xaea0200 0 0x200>,
+ <0 0xaea0400 0 0x600>,
+ <0 0xaea1000 0 0x400>;
+ interrupt-parent = <&mdss0>;
+ interrupts = <15>;
+ clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+
+ phys = <&mdss0_dp3_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss0_dp3_opp_table>;
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp3_in: endpoint {
+ remote-endpoint = <&mdss0_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss0_dp3_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
+ mdss0_dp2_phy: phy@aec2a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0aec2a00 0 0x19c>,
+ <0 0x0aec2200 0 0xec>,
+ <0 0x0aec2600 0 0xec>,
+ <0 0x0aec2000 0 0x1c8>;
+
+ clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss0_dp3_phy: phy@aec5a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0aec5a00 0 0x19c>,
+ <0 0x0aec5200 0 0xec>,
+ <0 0x0aec5600 0 0xec>,
+ <0 0x0aec5000 0 0x1c8>;
+
+ clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ dispcc0: clock-controller@af00000 {
+ compatible = "qcom,sc8280xp-dispcc0";
+ reg = <0 0x0af00000 0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&mdss0_dp2_phy 0>,
+ <&mdss0_dp2_phy 1>,
+ <&mdss0_dp3_phy 0>,
+ <&mdss0_dp3_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+ required-opps = <&rpmhpd_opp_nom>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2425,6 +2784,485 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
qcom,remote-pid = <12>;
};
};
+
+ mdss1: display-subsystem@22000000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0 0x22000000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc1 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1800 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss1_mdp: display-controller@22001000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0 0x22001000 0 0x8f000>,
+ <0 0x220b0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdss1_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss1>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_intf0_out: endpoint {
+ remote-endpoint = <&mdss1_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ mdss1_intf4_out: endpoint {
+ remote-endpoint = <&mdss1_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ mdss1_intf5_out: endpoint {
+ remote-endpoint = <&mdss1_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ mdss1_intf6_out: endpoint {
+ remote-endpoint = <&mdss1_dp2_in>;
+ };
+ };
+ };
+
+ mdss1_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss1_dp0: displayport-controller@22090000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x22090000 0 0x200>,
+ <0 0x22090200 0 0x200>,
+ <0 0x22090400 0 0x600>,
+ <0 0x22091000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <12>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+
+ phys = <&mdss1_dp0_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp0_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp0_in: endpoint {
+ remote-endpoint = <&mdss1_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ };
+
+ mdss1_dp1: displayport-controller@22098000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x22098000 0 0x200>,
+ <0 0x22098200 0 0x200>,
+ <0 0x22098400 0 0x600>,
+ <0 0x22099000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <13>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+
+ phys = <&mdss1_dp1_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp1_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp1_in: endpoint {
+ remote-endpoint = <&mdss1_intf4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss1_dp2: displayport-controller@2209a000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x2209a000 0 0x200>,
+ <0 0x2209a200 0 0x200>,
+ <0 0x2209a400 0 0x600>,
+ <0 0x2209b000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <14>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+
+ phys = <&mdss1_dp2_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp2_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp2_in: endpoint {
+ remote-endpoint = <&mdss1_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss1_dp3: displayport-controller@220a0000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x220a0000 0 0x200>,
+ <0 0x220a0200 0 0x200>,
+ <0 0x220a0400 0 0x600>,
+ <0 0x220a1000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <15>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+
+ phys = <&mdss1_dp3_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp3_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp3_in: endpoint {
+ remote-endpoint = <&mdss1_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp3_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
+ mdss1_dp2_phy: phy@220c2a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x220c2a00 0 0x19c>,
+ <0 0x220c2200 0 0xec>,
+ <0 0x220c2600 0 0xec>,
+ <0 0x220c2000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss1_dp3_phy: phy@220c5a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x220c5a00 0 0x19c>,
+ <0 0x220c5200 0 0xec>,
+ <0 0x220c5600 0 0xec>,
+ <0 0x220c5000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ dispcc1: clock-controller@22100000 {
+ compatible = "qcom,sc8280xp-dispcc1";
+ reg = <0 0x22100000 0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <0>,
+ <&mdss1_dp0_phy 0>,
+ <&mdss1_dp0_phy 1>,
+ <&mdss1_dp1_phy 0>,
+ <&mdss1_dp1_phy 1>,
+ <&mdss1_dp2_phy 0>,
+ <&mdss1_dp2_phy 1>,
+ <&mdss1_dp3_phy 0>,
+ <&mdss1_dp3_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+ required-opps = <&rpmhpd_opp_nom>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
};
thermal-zones {
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
1 file changed, 838 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 9f3132ac2857..c2f186495506 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4,6 +4,7 @@
* Copyright (c) 2022, Linaro Limited
*/
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
status = "disabled";
};
+ mdss1_dp0_phy: phy@8909a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x08909a00 0 0x19c>,
+ <0 0x08909200 0 0xec>,
+ <0 0x08909600 0 0xec>,
+ <0 0x08909000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss1_dp1_phy: phy@890ca00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0890ca00 0 0x19c>,
+ <0 0x0890c200 0 0xec>,
+ <0 0x0890c600 0 0xec>,
+ <0 0x0890c000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
system-cache-controller@9200000 {
compatible = "qcom,sc8280xp-llcc";
reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
@@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
};
};
+ mdss0: display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss0_mdp: display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@5 {
+ reg = <5>;
+ mdss0_intf5_out: endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ mdss0_intf6_out: endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss0_dp2: displayport-controller@ae9a000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0xae9a000 0 0x200>,
+ <0 0xae9a200 0 0x200>,
+ <0 0xae9a400 0 0x600>,
+ <0 0xae9b000 0 0x400>;
+ interrupt-parent = <&mdss0>;
+ interrupts = <14>;
+ clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+
+ phys = <&mdss0_dp2_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss0_dp2_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp2_in: endpoint {
+ remote-endpoint = <&mdss0_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss0_dp2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss0_dp3: displayport-controller@aea0000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0xaea0000 0 0x200>,
+ <0 0xaea0200 0 0x200>,
+ <0 0xaea0400 0 0x600>,
+ <0 0xaea1000 0 0x400>;
+ interrupt-parent = <&mdss0>;
+ interrupts = <15>;
+ clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+
+ phys = <&mdss0_dp3_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss0_dp3_opp_table>;
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp3_in: endpoint {
+ remote-endpoint = <&mdss0_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss0_dp3_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
+ mdss0_dp2_phy: phy@aec2a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0aec2a00 0 0x19c>,
+ <0 0x0aec2200 0 0xec>,
+ <0 0x0aec2600 0 0xec>,
+ <0 0x0aec2000 0 0x1c8>;
+
+ clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss0_dp3_phy: phy@aec5a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x0aec5a00 0 0x19c>,
+ <0 0x0aec5200 0 0xec>,
+ <0 0x0aec5600 0 0xec>,
+ <0 0x0aec5000 0 0x1c8>;
+
+ clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ dispcc0: clock-controller@af00000 {
+ compatible = "qcom,sc8280xp-dispcc0";
+ reg = <0 0x0af00000 0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&mdss0_dp2_phy 0>,
+ <&mdss0_dp2_phy 1>,
+ <&mdss0_dp3_phy 0>,
+ <&mdss0_dp3_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+ required-opps = <&rpmhpd_opp_nom>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2425,6 +2784,485 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
qcom,remote-pid = <12>;
};
};
+
+ mdss1: display-subsystem@22000000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0 0x22000000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc1 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1800 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss1_mdp: display-controller@22001000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0 0x22001000 0 0x8f000>,
+ <0 0x220b0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdss1_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss1>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_intf0_out: endpoint {
+ remote-endpoint = <&mdss1_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ mdss1_intf4_out: endpoint {
+ remote-endpoint = <&mdss1_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ mdss1_intf5_out: endpoint {
+ remote-endpoint = <&mdss1_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ mdss1_intf6_out: endpoint {
+ remote-endpoint = <&mdss1_dp2_in>;
+ };
+ };
+ };
+
+ mdss1_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss1_dp0: displayport-controller@22090000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x22090000 0 0x200>,
+ <0 0x22090200 0 0x200>,
+ <0 0x22090400 0 0x600>,
+ <0 0x22091000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <12>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+
+ phys = <&mdss1_dp0_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp0_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp0_in: endpoint {
+ remote-endpoint = <&mdss1_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ };
+
+ mdss1_dp1: displayport-controller@22098000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x22098000 0 0x200>,
+ <0 0x22098200 0 0x200>,
+ <0 0x22098400 0 0x600>,
+ <0 0x22099000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <13>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+
+ phys = <&mdss1_dp1_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp1_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp1_in: endpoint {
+ remote-endpoint = <&mdss1_intf4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss1_dp2: displayport-controller@2209a000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x2209a000 0 0x200>,
+ <0 0x2209a200 0 0x200>,
+ <0 0x2209a400 0 0x600>,
+ <0 0x2209b000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <14>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+
+ phys = <&mdss1_dp2_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp2_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp2_in: endpoint {
+ remote-endpoint = <&mdss1_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss1_dp3: displayport-controller@220a0000 {
+ compatible = "qcom,sc8280xp-dp";
+ reg = <0 0x220a0000 0 0x200>,
+ <0 0x220a0200 0 0x200>,
+ <0 0x220a0400 0 0x600>,
+ <0 0x220a1000 0 0x400>;
+ interrupt-parent = <&mdss1>;
+ interrupts = <15>;
+ clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+
+ phys = <&mdss1_dp3_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss1_dp3_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss1_dp3_in: endpoint {
+ remote-endpoint = <&mdss1_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss1_dp3_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
+ mdss1_dp2_phy: phy@220c2a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x220c2a00 0 0x19c>,
+ <0 0x220c2200 0 0xec>,
+ <0 0x220c2600 0 0xec>,
+ <0 0x220c2000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss1_dp3_phy: phy@220c5a00 {
+ compatible = "qcom,sc8280xp-dp-phy";
+ reg = <0 0x220c5a00 0 0x19c>,
+ <0 0x220c5200 0 0xec>,
+ <0 0x220c5600 0 0xec>,
+ <0 0x220c5000 0 0x1c8>;
+
+ clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ power-domains = <&rpmhpd SC8280XP_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ dispcc1: clock-controller@22100000 {
+ compatible = "qcom,sc8280xp-dispcc1";
+ reg = <0 0x22100000 0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <0>,
+ <&mdss1_dp0_phy 0>,
+ <&mdss1_dp0_phy 1>,
+ <&mdss1_dp1_phy 0>,
+ <&mdss1_dp1_phy 1>,
+ <&mdss1_dp2_phy 0>,
+ <&mdss1_dp2_phy 1>,
+ <&mdss1_dp3_phy 0>,
+ <&mdss1_dp3_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+ required-opps = <&rpmhpd_opp_nom>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
};
thermal-zones {
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index f09810e3d956..a7d2384cbbe8 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -20,7 +20,7 @@ aliases {
serial0 = &qup2_uart17;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pmc8280c_lpg 3 1000000>;
enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
@@ -34,6 +34,22 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_reg_en>;
+
+ regulator-boot-on;
+ };
+
vreg_edp_bl: regulator-edp-bl {
compatible = "regulator-fixed";
@@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp3 {
+ compatible = "qcom,sc8280xp-edp";
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ backlight = <&backlight>;
+
+ ports {
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_out>;
+ };
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_out: endpoint {
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l6b>;
+ vdda-pll-supply = <&vreg_l3b>;
+};
+
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
@@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
&tlmm {
gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio25";
+ function = "gpio";
+ output-enable;
+ };
+
kybd_default: kybd-default-state {
disable-pins {
pins = "gpio102";
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index f09810e3d956..a7d2384cbbe8 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -20,7 +20,7 @@ aliases {
serial0 = &qup2_uart17;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pmc8280c_lpg 3 1000000>;
enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
@@ -34,6 +34,22 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_reg_en>;
+
+ regulator-boot-on;
+ };
+
vreg_edp_bl: regulator-edp-bl {
compatible = "regulator-fixed";
@@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp3 {
+ compatible = "qcom,sc8280xp-edp";
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ backlight = <&backlight>;
+
+ ports {
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_out>;
+ };
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_out: endpoint {
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l6b>;
+ vdda-pll-supply = <&vreg_l3b>;
+};
+
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
@@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
&tlmm {
gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio25";
+ function = "gpio";
+ output-enable;
+ };
+
kybd_default: kybd-default-state {
disable-pins {
pins = "gpio102";
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 22:00 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
1 file changed, 241 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 6c29d7d757e0..d55c8c5304cc 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_phy_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_phy_out>;
+ };
+ };
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_phy_out>;
+ };
+ };
+ };
+
+ edp2-connector {
+ compatible = "dp-connector";
+ label = "EDP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp3-connector {
+ compatible = "dp-connector";
+ label = "EDP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp3_phy_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -163,13 +247,168 @@ vreg_l7g: ldo7 {
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11g: ldo11 {
+ regulator-name = "vreg_l11g";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&dispcc1 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp0_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp0_phy_out: endpoint {
+ remote-endpoint = <&dp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp1_phy_out: endpoint {
+ remote-endpoint = <&dp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v5 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
@ 2022-12-07 22:00 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-07 22:00 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v4:
- None
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
1 file changed, 241 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 6c29d7d757e0..d55c8c5304cc 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_phy_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_phy_out>;
+ };
+ };
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_phy_out>;
+ };
+ };
+ };
+
+ edp2-connector {
+ compatible = "dp-connector";
+ label = "EDP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp3-connector {
+ compatible = "dp-connector";
+ label = "EDP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp3_phy_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -163,13 +247,168 @@ vreg_l7g: ldo7 {
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11g: ldo11 {
+ regulator-name = "vreg_l11g";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&dispcc1 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp0_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp0_phy_out: endpoint {
+ remote-endpoint = <&dp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp1_phy_out: endpoint {
+ remote-endpoint = <&dp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
&pcie2a {
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
--
2.37.3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-07 23:30 ` Dmitry Baryshkov
-1 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-07 23:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
> necessary definitions and describe the DPU in the SC8280XP.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - Fix highest_bank_bit, based on downstream
> - Add ubwc_swizzle
> - Use CTL_SC7280_MASK instead of listing the bits directly
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
@ 2022-12-07 23:30 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-07 23:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
> necessary definitions and describe the DPU in the SC8280XP.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - Fix highest_bank_bit, based on downstream
> - Add ubwc_swizzle
> - Use CTL_SC7280_MASK instead of listing the bits directly
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 05/12] drm/msm/dp: Stop using DP id as index in desc
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:12 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:12 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> In the SC8280XP platform there are two identical MDSS instances, each
> with the same set of DisplayPort instances, at different addresses.
>
> By not relying on the index to define the instance id it's possible to
> describe them both in the same table and hence have a single compatible.
>
> While at it, flatten the cfg/desc structure so that the match data is
> just an array of descs.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
> 1 file changed, 25 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 7ff60e5ff325..eeb292f1ad1b 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -122,61 +122,41 @@ struct dp_display_private {
>
> struct msm_dp_desc {
> phys_addr_t io_start;
> + unsigned int id;
> unsigned int connector_type;
> bool wide_bus_en;
> };
>
> -struct msm_dp_config {
> - const struct msm_dp_desc *descs;
> - size_t num_descs;
> -};
> -
> static const struct msm_dp_desc sc7180_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> -};
> -
> -static const struct msm_dp_config sc7180_dp_cfg = {
> - .descs = sc7180_dp_descs,
> - .num_descs = ARRAY_SIZE(sc7180_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + {}
> };
>
> static const struct msm_dp_desc sc7280_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> - [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> -};
> -
> -static const struct msm_dp_config sc7280_dp_cfg = {
> - .descs = sc7280_dp_descs,
> - .num_descs = ARRAY_SIZE(sc7280_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + {}
> };
>
> static const struct msm_dp_desc sc8180x_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> - [MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> - [MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
> -};
> -
> -static const struct msm_dp_config sc8180x_dp_cfg = {
> - .descs = sc8180x_dp_descs,
> - .num_descs = ARRAY_SIZE(sc8180x_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
> + {}
> };
>
> static const struct msm_dp_desc sm8350_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> -};
> -
> -static const struct msm_dp_config sm8350_dp_cfg = {
> - .descs = sm8350_dp_descs,
> - .num_descs = ARRAY_SIZE(sm8350_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + {}
> };
>
> static const struct of_device_id dp_dt_match[] = {
> - { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
> - { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
> - { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
> - { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
> - { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
> - { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
> + { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
> + { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
> + { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
> + { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
>
> @@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
> return 0;
> }
>
> -static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
> - unsigned int *id)
> +static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
> {
> - const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
> + const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
> struct resource *res;
> int i;
>
> @@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
> if (!res)
> return NULL;
>
> - for (i = 0; i < cfg->num_descs; i++) {
> - if (cfg->descs[i].io_start == res->start) {
> - *id = i;
> - return &cfg->descs[i];
> - }
> + for (i = 0; i < descs[i].io_start; i++) {
> + if (descs[i].io_start == res->start)
> + return &descs[i];
> }
>
> dev_err(&pdev->dev, "unknown displayport instance\n");
> @@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
> if (!dp)
> return -ENOMEM;
>
> - desc = dp_display_get_desc(pdev, &dp->id);
> + desc = dp_display_get_desc(pdev);
> if (!desc)
> return -EINVAL;
>
> dp->pdev = pdev;
> dp->name = "drm_dp";
> + dp->id = desc->id;
> dp->dp_display.connector_type = desc->connector_type;
> dp->wide_bus_en = desc->wide_bus_en;
> dp->dp_display.is_edp =
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 05/12] drm/msm/dp: Stop using DP id as index in desc
@ 2022-12-08 23:12 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:12 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> In the SC8280XP platform there are two identical MDSS instances, each
> with the same set of DisplayPort instances, at different addresses.
>
> By not relying on the index to define the instance id it's possible to
> describe them both in the same table and hence have a single compatible.
>
> While at it, flatten the cfg/desc structure so that the match data is
> just an array of descs.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
> 1 file changed, 25 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 7ff60e5ff325..eeb292f1ad1b 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -122,61 +122,41 @@ struct dp_display_private {
>
> struct msm_dp_desc {
> phys_addr_t io_start;
> + unsigned int id;
> unsigned int connector_type;
> bool wide_bus_en;
> };
>
> -struct msm_dp_config {
> - const struct msm_dp_desc *descs;
> - size_t num_descs;
> -};
> -
> static const struct msm_dp_desc sc7180_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> -};
> -
> -static const struct msm_dp_config sc7180_dp_cfg = {
> - .descs = sc7180_dp_descs,
> - .num_descs = ARRAY_SIZE(sc7180_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + {}
> };
>
> static const struct msm_dp_desc sc7280_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> - [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> -};
> -
> -static const struct msm_dp_config sc7280_dp_cfg = {
> - .descs = sc7280_dp_descs,
> - .num_descs = ARRAY_SIZE(sc7280_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + {}
> };
>
> static const struct msm_dp_desc sc8180x_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> - [MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> - [MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
> -};
> -
> -static const struct msm_dp_config sc8180x_dp_cfg = {
> - .descs = sc8180x_dp_descs,
> - .num_descs = ARRAY_SIZE(sc8180x_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
> + {}
> };
>
> static const struct msm_dp_desc sm8350_dp_descs[] = {
> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> -};
> -
> -static const struct msm_dp_config sm8350_dp_cfg = {
> - .descs = sm8350_dp_descs,
> - .num_descs = ARRAY_SIZE(sm8350_dp_descs),
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> + {}
> };
>
> static const struct of_device_id dp_dt_match[] = {
> - { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
> - { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
> - { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
> - { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
> - { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
> - { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
> + { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
> + { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
> + { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
> + { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
>
> @@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
> return 0;
> }
>
> -static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
> - unsigned int *id)
> +static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
> {
> - const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
> + const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
> struct resource *res;
> int i;
>
> @@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
> if (!res)
> return NULL;
>
> - for (i = 0; i < cfg->num_descs; i++) {
> - if (cfg->descs[i].io_start == res->start) {
> - *id = i;
> - return &cfg->descs[i];
> - }
> + for (i = 0; i < descs[i].io_start; i++) {
> + if (descs[i].io_start == res->start)
> + return &descs[i];
> }
>
> dev_err(&pdev->dev, "unknown displayport instance\n");
> @@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
> if (!dp)
> return -ENOMEM;
>
> - desc = dp_display_get_desc(pdev, &dp->id);
> + desc = dp_display_get_desc(pdev);
> if (!desc)
> return -EINVAL;
>
> dp->pdev = pdev;
> dp->name = "drm_dp";
> + dp->id = desc->id;
> dp->dp_display.connector_type = desc->connector_type;
> dp->wide_bus_en = desc->wide_bus_en;
> dp->dp_display.is_edp =
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:13 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:13 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP platform has four DisplayPort controllers, per MDSS
> instance, all with widebus support.
>
> The first two are defined to be DisplayPort only, while the latter pair
> (of each instance) can be either DisplayPort or Embedded DisplayPort.
> The two sets are tied to the possible compatibels.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index eeb292f1ad1b..5b7f1f885b2f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -145,6 +145,26 @@ static const struct msm_dp_desc sc8180x_dp_descs[] = {
> {}
> };
>
> +static const struct msm_dp_desc sc8280xp_dp_descs[] = {
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + {}
> +};
> +
> +static const struct msm_dp_desc sc8280xp_edp_descs[] = {
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + {}
> +};
> +
> static const struct msm_dp_desc sm8350_dp_descs[] = {
> { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> {}
> @@ -156,6 +176,8 @@ static const struct of_device_id dp_dt_match[] = {
> { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
> { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
> { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
> + { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
> { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
@ 2022-12-08 23:13 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:13 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP platform has four DisplayPort controllers, per MDSS
> instance, all with widebus support.
>
> The first two are defined to be DisplayPort only, while the latter pair
> (of each instance) can be either DisplayPort or Embedded DisplayPort.
> The two sets are tied to the possible compatibels.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index eeb292f1ad1b..5b7f1f885b2f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -145,6 +145,26 @@ static const struct msm_dp_desc sc8180x_dp_descs[] = {
> {}
> };
>
> +static const struct msm_dp_desc sc8280xp_dp_descs[] = {
> + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
> + {}
> +};
> +
> +static const struct msm_dp_desc sc8280xp_edp_descs[] = {
> + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
> + {}
> +};
> +
> static const struct msm_dp_desc sm8350_dp_descs[] = {
> { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
> {}
> @@ -156,6 +176,8 @@ static const struct of_device_id dp_dt_match[] = {
> { .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
> { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
> { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> + { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
> + { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
> { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 07/12] drm/msm/dp: Add SDM845 DisplayPort instance
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:14 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:14 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SDM845 platform has a single DisplayPort controller, with
> the same design as SC7180, so add support for this by reusing the SC7180
> definition.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 5b7f1f885b2f..666b45c8ab80 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -178,6 +178,7 @@ static const struct of_device_id dp_dt_match[] = {
> { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
> { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
> + { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
> { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 07/12] drm/msm/dp: Add SDM845 DisplayPort instance
@ 2022-12-08 23:14 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:14 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SDM845 platform has a single DisplayPort controller, with
> the same design as SC7180, so add support for this by reusing the SC7180
> definition.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/dp/dp_display.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 5b7f1f885b2f..666b45c8ab80 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -178,6 +178,7 @@ static const struct of_device_id dp_dt_match[] = {
> { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
> { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
> { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
> + { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
> { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
> {}
> };
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:14 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:14 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The DisplayPort controller's internal HPD interrupt handling is used for
> cases where the HPD signal is connected to a GPIO which is pinmuxed into
> the DisplayPort controller. In other configurations the HPD notification
> might be delivered by the DRM framework from an associated bridge.
>
> This difference is not appropriately represented by the "is_edp"
> boolean, but is properly represented by the frameworks invocation of the
> hpd_enable() and hpd_disable() callbacks. Switch the current condition
> to rely on these callbacks instead.
>
> This ensures appropriate handling of the three cases; no bridge
> connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
> DRM_BRIDGE_OP_HPD.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Reordered the hpd_enable/disable patch earlier
> - Squashed in internal_hpd conditional changes into the same patch
>
> drivers/gpu/drm/msm/dp/dp_display.c | 40 +++++++++++++++++++++--------
> drivers/gpu/drm/msm/dp/dp_display.h | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.c | 2 ++
> drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
> 4 files changed, 35 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 666b45c8ab80..095adf528e43 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> }
>
> /* enable HDP irq_hpd/replug interrupt */
> - dp_catalog_hpd_config_intr(dp->catalog,
> - DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog,
> + DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
> + true);
>
> drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
> dp->dp_display.connector_type, state);
> @@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> dp->dp_display.connector_type, state);
>
> /* disable irq_hpd/replug interrupts */
> - dp_catalog_hpd_config_intr(dp->catalog,
> - DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog,
> + DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
> + false);
>
> /* unplugged, no more irq_hpd handle */
> dp_del_event(dp, EV_IRQ_HPD_INT);
> @@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> }
>
> /* disable HPD plug interrupts */
> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
>
> /*
> * We don't need separate work for disconnect as
> @@ -696,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> dp_display_handle_plugged_change(&dp->dp_display, false);
>
> /* enable HDP plug interrupt to prepare for next plugin */
> - if (!dp->dp_display.is_edp)
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
>
> drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
> @@ -1081,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
> dp_display_host_init(dp);
> dp_catalog_ctrl_hpd_config(dp->catalog);
>
> - /* Enable plug and unplug interrupts only for external DisplayPort */
> - if (!dp->dp_display.is_edp)
> + /* Enable plug and unplug interrupts only if requested */
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog,
> DP_DP_HPD_PLUG_INT_MASK |
> DP_DP_HPD_UNPLUG_INT_MASK,
> @@ -1374,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
>
> dp_catalog_ctrl_hpd_config(dp->catalog);
>
> -
> - if (!dp->dp_display.is_edp)
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog,
> DP_DP_HPD_PLUG_INT_MASK |
> DP_DP_HPD_UNPLUG_INT_MASK,
> @@ -1772,3 +1776,19 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> dp_display->dp_mode.h_active_low =
> !!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
> }
> +
> +void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> +
> + dp_display->internal_hpd = true;
> +}
> +
> +void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> +
> + dp_display->internal_hpd = false;
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> index dcedf021f7fe..371337d0fae2 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -21,6 +21,7 @@ struct msm_dp {
> bool power_on;
> unsigned int connector_type;
> bool is_edp;
> + bool internal_hpd;
>
> hdmi_codec_plugged_cb plugged_cb;
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> index 6db82f9b03af..9d03b6ee3c41 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -102,6 +102,8 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
> .get_modes = dp_bridge_get_modes,
> .detect = dp_bridge_detect,
> .atomic_check = dp_bridge_atomic_check,
> + .hpd_enable = dp_bridge_hpd_enable,
> + .hpd_disable = dp_bridge_hpd_disable,
> };
>
> struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> index 82035dbb0578..1f871b555006 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.h
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -32,5 +32,7 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
> void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> const struct drm_display_mode *mode,
> const struct drm_display_mode *adjusted_mode);
> +void dp_bridge_hpd_enable(struct drm_bridge *bridge);
> +void dp_bridge_hpd_disable(struct drm_bridge *bridge);
>
> #endif /* _DP_DRM_H_ */
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
@ 2022-12-08 23:14 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:14 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The DisplayPort controller's internal HPD interrupt handling is used for
> cases where the HPD signal is connected to a GPIO which is pinmuxed into
> the DisplayPort controller. In other configurations the HPD notification
> might be delivered by the DRM framework from an associated bridge.
>
> This difference is not appropriately represented by the "is_edp"
> boolean, but is properly represented by the frameworks invocation of the
> hpd_enable() and hpd_disable() callbacks. Switch the current condition
> to rely on these callbacks instead.
>
> This ensures appropriate handling of the three cases; no bridge
> connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
> DRM_BRIDGE_OP_HPD.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Reordered the hpd_enable/disable patch earlier
> - Squashed in internal_hpd conditional changes into the same patch
>
> drivers/gpu/drm/msm/dp/dp_display.c | 40 +++++++++++++++++++++--------
> drivers/gpu/drm/msm/dp/dp_display.h | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.c | 2 ++
> drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
> 4 files changed, 35 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 666b45c8ab80..095adf528e43 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> }
>
> /* enable HDP irq_hpd/replug interrupt */
> - dp_catalog_hpd_config_intr(dp->catalog,
> - DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog,
> + DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
> + true);
>
> drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
> dp->dp_display.connector_type, state);
> @@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> dp->dp_display.connector_type, state);
>
> /* disable irq_hpd/replug interrupts */
> - dp_catalog_hpd_config_intr(dp->catalog,
> - DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog,
> + DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
> + false);
>
> /* unplugged, no more irq_hpd handle */
> dp_del_event(dp, EV_IRQ_HPD_INT);
> @@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> }
>
> /* disable HPD plug interrupts */
> - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
> + if (dp->dp_display.internal_hpd)
> + dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
>
> /*
> * We don't need separate work for disconnect as
> @@ -696,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> dp_display_handle_plugged_change(&dp->dp_display, false);
>
> /* enable HDP plug interrupt to prepare for next plugin */
> - if (!dp->dp_display.is_edp)
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
>
> drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
> @@ -1081,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
> dp_display_host_init(dp);
> dp_catalog_ctrl_hpd_config(dp->catalog);
>
> - /* Enable plug and unplug interrupts only for external DisplayPort */
> - if (!dp->dp_display.is_edp)
> + /* Enable plug and unplug interrupts only if requested */
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog,
> DP_DP_HPD_PLUG_INT_MASK |
> DP_DP_HPD_UNPLUG_INT_MASK,
> @@ -1374,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
>
> dp_catalog_ctrl_hpd_config(dp->catalog);
>
> -
> - if (!dp->dp_display.is_edp)
> + if (dp->dp_display.internal_hpd)
> dp_catalog_hpd_config_intr(dp->catalog,
> DP_DP_HPD_PLUG_INT_MASK |
> DP_DP_HPD_UNPLUG_INT_MASK,
> @@ -1772,3 +1776,19 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> dp_display->dp_mode.h_active_low =
> !!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
> }
> +
> +void dp_bridge_hpd_enable(struct drm_bridge *bridge)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> +
> + dp_display->internal_hpd = true;
> +}
> +
> +void dp_bridge_hpd_disable(struct drm_bridge *bridge)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> +
> + dp_display->internal_hpd = false;
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> index dcedf021f7fe..371337d0fae2 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -21,6 +21,7 @@ struct msm_dp {
> bool power_on;
> unsigned int connector_type;
> bool is_edp;
> + bool internal_hpd;
>
> hdmi_codec_plugged_cb plugged_cb;
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> index 6db82f9b03af..9d03b6ee3c41 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -102,6 +102,8 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
> .get_modes = dp_bridge_get_modes,
> .detect = dp_bridge_detect,
> .atomic_check = dp_bridge_atomic_check,
> + .hpd_enable = dp_bridge_hpd_enable,
> + .hpd_disable = dp_bridge_hpd_disable,
> };
>
> struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> index 82035dbb0578..1f871b555006 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.h
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -32,5 +32,7 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
> void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> const struct drm_display_mode *mode,
> const struct drm_display_mode *adjusted_mode);
> +void dp_bridge_hpd_enable(struct drm_bridge *bridge);
> +void dp_bridge_hpd_disable(struct drm_bridge *bridge);
>
> #endif /* _DP_DRM_H_ */
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:15 ` Dmitry Baryshkov
-1 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 23:15 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
> Qualcomm SDM845 and SC8280XP platforms.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>
> Changes since v4:
> - None
>
> .../devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index f2515af8256f..a1dc3a13e1cf 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -21,6 +21,9 @@ properties:
> - qcom,sc7280-edp
> - qcom,sc8180x-dp
> - qcom,sc8180x-edp
> + - qcom,sc8280xp-dp
> + - qcom,sc8280xp-edp
This also should be added to the eDP conditional, to allow the aux-bus
child node (and disallow #sound-dai-cells).
> + - qcom,sdm845-dp
> - qcom,sm8350-dp
>
> reg:
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
@ 2022-12-08 23:15 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-08 23:15 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
> Qualcomm SDM845 and SC8280XP platforms.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>
> Changes since v4:
> - None
>
> .../devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index f2515af8256f..a1dc3a13e1cf 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -21,6 +21,9 @@ properties:
> - qcom,sc7280-edp
> - qcom,sc8180x-dp
> - qcom,sc8180x-edp
> + - qcom,sc8280xp-dp
> + - qcom,sc8280xp-edp
This also should be added to the eDP conditional, to allow the aux-bus
child node (and disallow #sound-dai-cells).
> + - qcom,sdm845-dp
> - qcom,sm8350-dp
>
> reg:
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 09/12] drm/msm/dp: Implement hpd_notify()
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:15 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:15 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
> physical signal on a GPIO pin into the controller. This is not always
> possible, either because there aren't dedicated GPIOs available or
> because the hot-plug signal is a virtual notification, in cases such as
> USB Type-C.
>
> For these cases, by implementing the hpd_notify() callback for the
> DisplayPort controller's drm_bridge, a downstream drm_bridge
> (next_bridge) can be used to track and signal the connection status
> changes.
>
> This makes it possible to use downstream drm_bridges such as
> display-connector or any virtual mechanism, as long as they are
> implemented as a drm_bridge.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> [bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Look at internal_hpd now that it's introduced before this patch.
>
> drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
> drivers/gpu/drm/msm/dp/dp_drm.c | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
> 3 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 095adf528e43..0bee412603fe 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1792,3 +1792,25 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
>
> dp_display->internal_hpd = false;
> }
> +
> +void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> + enum drm_connector_status status)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> + struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> + /* Without next_bridge interrupts are handled by the DP core directly */
> + if (dp_display->internal_hpd)
> + return;
> +
> + if (!dp->core_initialized) {
> + drm_dbg_dp(dp->drm_dev, "not initialized\n");
> + return;
> + }
> +
> + if (!dp_display->is_connected && status == connector_status_connected)
> + dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> + else if (dp_display->is_connected && status == connector_status_disconnected)
> + dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> index 9d03b6ee3c41..275370f21115 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -104,6 +104,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
> .atomic_check = dp_bridge_atomic_check,
> .hpd_enable = dp_bridge_hpd_enable,
> .hpd_disable = dp_bridge_hpd_disable,
> + .hpd_notify = dp_bridge_hpd_notify,
> };
>
> struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> index 1f871b555006..250f7c66201f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.h
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -34,5 +34,7 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> const struct drm_display_mode *adjusted_mode);
> void dp_bridge_hpd_enable(struct drm_bridge *bridge);
> void dp_bridge_hpd_disable(struct drm_bridge *bridge);
> +void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> + enum drm_connector_status status);
>
> #endif /* _DP_DRM_H_ */
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 09/12] drm/msm/dp: Implement hpd_notify()
@ 2022-12-08 23:15 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:15 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
> physical signal on a GPIO pin into the controller. This is not always
> possible, either because there aren't dedicated GPIOs available or
> because the hot-plug signal is a virtual notification, in cases such as
> USB Type-C.
>
> For these cases, by implementing the hpd_notify() callback for the
> DisplayPort controller's drm_bridge, a downstream drm_bridge
> (next_bridge) can be used to track and signal the connection status
> changes.
>
> This makes it possible to use downstream drm_bridges such as
> display-connector or any virtual mechanism, as long as they are
> implemented as a drm_bridge.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> [bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Look at internal_hpd now that it's introduced before this patch.
>
> drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
> drivers/gpu/drm/msm/dp/dp_drm.c | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.h | 2 ++
> 3 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 095adf528e43..0bee412603fe 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1792,3 +1792,25 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
>
> dp_display->internal_hpd = false;
> }
> +
> +void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> + enum drm_connector_status status)
> +{
> + struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
> + struct msm_dp *dp_display = dp_bridge->dp_display;
> + struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
> +
> + /* Without next_bridge interrupts are handled by the DP core directly */
> + if (dp_display->internal_hpd)
> + return;
> +
> + if (!dp->core_initialized) {
> + drm_dbg_dp(dp->drm_dev, "not initialized\n");
> + return;
> + }
> +
> + if (!dp_display->is_connected && status == connector_status_connected)
> + dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> + else if (dp_display->is_connected && status == connector_status_disconnected)
> + dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> +}
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
> index 9d03b6ee3c41..275370f21115 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
> @@ -104,6 +104,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
> .atomic_check = dp_bridge_atomic_check,
> .hpd_enable = dp_bridge_hpd_enable,
> .hpd_disable = dp_bridge_hpd_disable,
> + .hpd_notify = dp_bridge_hpd_notify,
> };
>
> struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
> index 1f871b555006..250f7c66201f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_drm.h
> +++ b/drivers/gpu/drm/msm/dp/dp_drm.h
> @@ -34,5 +34,7 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
> const struct drm_display_mode *adjusted_mode);
> void dp_bridge_hpd_enable(struct drm_bridge *bridge);
> void dp_bridge_hpd_disable(struct drm_bridge *bridge);
> +void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> + enum drm_connector_status status);
>
> #endif /* _DP_DRM_H_ */
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:31 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:31 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
> necessary definitions and describe the DPU in the SC8280XP.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Fix highest_bank_bit, based on downstream
> - Add ubwc_swizzle
> - Use CTL_SC7280_MASK instead of listing the bits directly
>
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/msm_drv.h | 1 +
> 7 files changed, 243 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 2196e205efa5..0315fe68af2f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -124,6 +124,19 @@
> BIT(MDP_AD4_0_INTR) | \
> BIT(MDP_AD4_1_INTR))
>
> +#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> + BIT(MDP_SSPP_TOP0_INTR2) | \
> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> + BIT(MDP_INTF0_7xxx_INTR) | \
> + BIT(MDP_INTF1_7xxx_INTR) | \
> + BIT(MDP_INTF2_7xxx_INTR) | \
> + BIT(MDP_INTF3_7xxx_INTR) | \
> + BIT(MDP_INTF4_7xxx_INTR) | \
> + BIT(MDP_INTF5_7xxx_INTR) | \
> + BIT(MDP_INTF6_7xxx_INTR) | \
> + BIT(MDP_INTF7_7xxx_INTR) | \
> + BIT(MDP_INTF8_7xxx_INTR))
> +
> #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
> BIT(DPU_WB_UBWC) | \
> BIT(DPU_WB_YUV_CONFIG) | \
> @@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
> .max_vdeci_exp = MAX_VERT_DECIMATION,
> };
>
> +static const struct dpu_caps sc8280xp_dpu_caps = {
> + .max_mixer_width = 2560,
> + .max_mixer_blendstages = 11,
> + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> + .ubwc_version = DPU_HW_UBWC_VER_40,
> + .has_src_split = true,
> + .has_dim_layer = true,
> + .has_idle_pc = true,
> + .has_3d_merge = true,
> + .max_linewidth = 5120,
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +};
> +
> static const struct dpu_caps sm8250_dpu_caps = {
> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> .max_mixer_blendstages = 0xb,
> @@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
> },
> };
>
> +static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
> + {
> + .name = "top_0", .id = MDP_TOP,
> + .base = 0x0, .len = 0x494,
> + .features = 0,
> + .highest_bank_bit = 2,
> + .ubwc_swizzle = 6,
> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
> + },
> +};
> +
> static const struct dpu_mdp_cfg qcm2290_mdp[] = {
> {
> .name = "top_0", .id = MDP_TOP,
> @@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
> },
> };
>
> +static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
> + {
> + .name = "ctl_0", .id = CTL_0,
> + .base = 0x15000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> + },
> + {
> + .name = "ctl_1", .id = CTL_1,
> + .base = 0x16000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> + },
> + {
> + .name = "ctl_2", .id = CTL_2,
> + .base = 0x17000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> + },
> + {
> + .name = "ctl_3", .id = CTL_3,
> + .base = 0x18000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> + },
> + {
> + .name = "ctl_4", .id = CTL_4,
> + .base = 0x19000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> + },
> + {
> + .name = "ctl_5", .id = CTL_5,
> + .base = 0x1a000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> + },
> +};
> +
> static const struct dpu_ctl_cfg sm8150_ctl[] = {
> {
> .name = "ctl_0", .id = CTL_0,
> @@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
> sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> };
>
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
> + _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
> + _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
> + _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
> + _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
> +
> +static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
> + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
> + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
> + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
> + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
> + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
> + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
> + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
> + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> +};
>
> #define _VIG_SBLK_NOSCALE(num, sdma_pri) \
> { \
> @@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
> &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
> };
>
> +/* SC8280XP */
> +
> +static const struct dpu_lm_cfg sc8280xp_lm[] = {
> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
> + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
> + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
> + LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
> + LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
> + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
> +};
> +
> /* SM8150 */
>
> static const struct dpu_lm_cfg sm8150_lm[] = {
> @@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
> PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
> };
>
> +static struct dpu_pingpong_cfg sc8280xp_pp[] = {
> + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
> + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
> + PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
> + PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
> + PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
> + PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
> +};
> +
> static const struct dpu_pingpong_cfg sm8150_pp[] = {
> PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
> };
>
> +static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
> + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> +};
> +
> /*************************************************************
> * DSC sub blocks config
> *************************************************************/
> @@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
> INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> };
>
> +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
> +static const struct dpu_intf_cfg sc8280xp_intf[] = {
> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> + INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> + INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
> + INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
> + INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
> +};
> +
> static const struct dpu_intf_cfg qcm2290_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
> INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> @@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
> },
> };
>
> +static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
> + .base = 0x0,
> + .version = 0x00020000,
> + .trigger_sel_off = 0x119c,
> + .xin_id = 7,
> + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> +};
> +
> static const struct dpu_reg_dma_cfg sdm845_regdma = {
> .base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
> };
> @@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
> .min_llcc_ib = 800000,
> .min_dram_ib = 800000,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .qos_lut_tbl = {
> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> + .entries = sc7180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> + .entries = sc7180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = {
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> + .clk_inefficiency_factor = 105,
> + .bw_inefficiency_factor = 120,
> +};
> +
> +static const struct dpu_perf_cfg sc8280xp_perf_data = {
> + .max_bw_low = 13600000,
> + .max_bw_high = 18200000,
> + .min_core_ib = 2500000,
> + .min_llcc_ib = 0,
> + .min_dram_ib = 800000,
> + .danger_lut_tbl = {0xf, 0xffff, 0x0},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc8180x_qos_linear),
> .entries = sc8180x_qos_linear
> @@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
> .mdss_irqs = IRQ_SC8180X_MASK,
> };
>
> +static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
> + .caps = &sc8280xp_dpu_caps,
> + .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
> + .mdp = sc8280xp_mdp,
> + .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
> + .ctl = sc8280xp_ctl,
> + .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
> + .sspp = sc8280xp_sspp,
> + .mixer_count = ARRAY_SIZE(sc8280xp_lm),
> + .mixer = sc8280xp_lm,
> + .dspp_count = ARRAY_SIZE(sm8150_dspp),
> + .dspp = sm8150_dspp,
> + .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
> + .pingpong = sc8280xp_pp,
> + .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
> + .merge_3d = sc8280xp_merge_3d,
> + .intf_count = ARRAY_SIZE(sc8280xp_intf),
> + .intf = sc8280xp_intf,
> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> + .vbif = sdm845_vbif,
> + .perf = &sc8280xp_perf_data,
> + .mdss_irqs = IRQ_SC8280XP_MASK,
> +};
> +
> static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
> .caps = &sm8250_dpu_caps,
> .mdp_count = ARRAY_SIZE(sm8250_mdp),
> @@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> { .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
> { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
> { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> + { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
> };
>
> const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 3b645d5aa9aa..6897b35c18fa 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -47,6 +47,7 @@
> #define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
> #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> +#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
>
> #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
> #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index cf1b6d84c18a..27d74c4d8a98 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -35,6 +35,9 @@
> #define MDP_INTF_3_OFF_REV_7xxx 0x37000
> #define MDP_INTF_4_OFF_REV_7xxx 0x38000
> #define MDP_INTF_5_OFF_REV_7xxx 0x39000
> +#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
> +#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
> +#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
>
> /**
> * struct dpu_intr_reg - array of DPU register sets
> @@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
> },
> + [MDP_INTF6_7xxx_INTR] = {
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> + [MDP_INTF7_7xxx_INTR] = {
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> + [MDP_INTF8_7xxx_INTR] = {
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> };
>
> #define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 46443955443c..425465011c80 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
> MDP_INTF3_7xxx_INTR,
> MDP_INTF4_7xxx_INTR,
> MDP_INTF5_7xxx_INTR,
> + MDP_INTF6_7xxx_INTR,
> + MDP_INTF7_7xxx_INTR,
> + MDP_INTF8_7xxx_INTR,
> MDP_INTR_MAX,
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d3b0ed0a9c6c..d595096a4b1f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -214,6 +214,8 @@ enum dpu_intf {
> INTF_4,
> INTF_5,
> INTF_6,
> + INTF_7,
> + INTF_8,
> INTF_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index b71199511a52..30f894864cca 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
> { .compatible = "qcom,sc7180-dpu", },
> { .compatible = "qcom,sc7280-dpu", },
> { .compatible = "qcom,sc8180x-dpu", },
> + { .compatible = "qcom,sc8280xp-dpu", },
> { .compatible = "qcom,sm6115-dpu", },
> { .compatible = "qcom,sm8150-dpu", },
> { .compatible = "qcom,sm8250-dpu", },
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index d4e0ef608950..b2789efd59e8 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -61,6 +61,7 @@ enum msm_dp_controller {
> MSM_DP_CONTROLLER_0,
> MSM_DP_CONTROLLER_1,
> MSM_DP_CONTROLLER_2,
> + MSM_DP_CONTROLLER_3,
> MSM_DP_CONTROLLER_COUNT,
> };
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
@ 2022-12-08 23:31 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:31 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
> necessary definitions and describe the DPU in the SC8280XP.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - Fix highest_bank_bit, based on downstream
> - Add ubwc_swizzle
> - Use CTL_SC7280_MASK instead of listing the bits directly
>
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/msm_drv.h | 1 +
> 7 files changed, 243 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 2196e205efa5..0315fe68af2f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -124,6 +124,19 @@
> BIT(MDP_AD4_0_INTR) | \
> BIT(MDP_AD4_1_INTR))
>
> +#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> + BIT(MDP_SSPP_TOP0_INTR2) | \
> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> + BIT(MDP_INTF0_7xxx_INTR) | \
> + BIT(MDP_INTF1_7xxx_INTR) | \
> + BIT(MDP_INTF2_7xxx_INTR) | \
> + BIT(MDP_INTF3_7xxx_INTR) | \
> + BIT(MDP_INTF4_7xxx_INTR) | \
> + BIT(MDP_INTF5_7xxx_INTR) | \
> + BIT(MDP_INTF6_7xxx_INTR) | \
> + BIT(MDP_INTF7_7xxx_INTR) | \
> + BIT(MDP_INTF8_7xxx_INTR))
> +
> #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
> BIT(DPU_WB_UBWC) | \
> BIT(DPU_WB_YUV_CONFIG) | \
> @@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
> .max_vdeci_exp = MAX_VERT_DECIMATION,
> };
>
> +static const struct dpu_caps sc8280xp_dpu_caps = {
> + .max_mixer_width = 2560,
> + .max_mixer_blendstages = 11,
> + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> + .ubwc_version = DPU_HW_UBWC_VER_40,
> + .has_src_split = true,
> + .has_dim_layer = true,
> + .has_idle_pc = true,
> + .has_3d_merge = true,
> + .max_linewidth = 5120,
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +};
> +
> static const struct dpu_caps sm8250_dpu_caps = {
> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> .max_mixer_blendstages = 0xb,
> @@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
> },
> };
>
> +static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
> + {
> + .name = "top_0", .id = MDP_TOP,
> + .base = 0x0, .len = 0x494,
> + .features = 0,
> + .highest_bank_bit = 2,
> + .ubwc_swizzle = 6,
> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
> + },
> +};
> +
> static const struct dpu_mdp_cfg qcm2290_mdp[] = {
> {
> .name = "top_0", .id = MDP_TOP,
> @@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
> },
> };
>
> +static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
> + {
> + .name = "ctl_0", .id = CTL_0,
> + .base = 0x15000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> + },
> + {
> + .name = "ctl_1", .id = CTL_1,
> + .base = 0x16000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> + },
> + {
> + .name = "ctl_2", .id = CTL_2,
> + .base = 0x17000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> + },
> + {
> + .name = "ctl_3", .id = CTL_3,
> + .base = 0x18000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> + },
> + {
> + .name = "ctl_4", .id = CTL_4,
> + .base = 0x19000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> + },
> + {
> + .name = "ctl_5", .id = CTL_5,
> + .base = 0x1a000, .len = 0x204,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> + },
> +};
> +
> static const struct dpu_ctl_cfg sm8150_ctl[] = {
> {
> .name = "ctl_0", .id = CTL_0,
> @@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
> sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> };
>
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
> + _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
> + _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
> + _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
> + _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
> +
> +static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
> + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
> + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
> + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
> + sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
> + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
> + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
> + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
> + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
> + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> +};
>
> #define _VIG_SBLK_NOSCALE(num, sdma_pri) \
> { \
> @@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
> &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
> };
>
> +/* SC8280XP */
> +
> +static const struct dpu_lm_cfg sc8280xp_lm[] = {
> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
> + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
> + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
> + LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
> + LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
> + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
> +};
> +
> /* SM8150 */
>
> static const struct dpu_lm_cfg sm8150_lm[] = {
> @@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
> PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
> };
>
> +static struct dpu_pingpong_cfg sc8280xp_pp[] = {
> + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
> + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
> + PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
> + PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
> + PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
> + PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
> +};
> +
> static const struct dpu_pingpong_cfg sm8150_pp[] = {
> PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
> };
>
> +static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
> + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> +};
> +
> /*************************************************************
> * DSC sub blocks config
> *************************************************************/
> @@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
> INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> };
>
> +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
> +static const struct dpu_intf_cfg sc8280xp_intf[] = {
> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> + INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> + INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
> + INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
> + INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
> +};
> +
> static const struct dpu_intf_cfg qcm2290_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
> INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> @@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
> },
> };
>
> +static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
> + .base = 0x0,
> + .version = 0x00020000,
> + .trigger_sel_off = 0x119c,
> + .xin_id = 7,
> + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> +};
> +
> static const struct dpu_reg_dma_cfg sdm845_regdma = {
> .base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
> };
> @@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
> .min_llcc_ib = 800000,
> .min_dram_ib = 800000,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .qos_lut_tbl = {
> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> + .entries = sc7180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> + .entries = sc7180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = {
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> + .clk_inefficiency_factor = 105,
> + .bw_inefficiency_factor = 120,
> +};
> +
> +static const struct dpu_perf_cfg sc8280xp_perf_data = {
> + .max_bw_low = 13600000,
> + .max_bw_high = 18200000,
> + .min_core_ib = 2500000,
> + .min_llcc_ib = 0,
> + .min_dram_ib = 800000,
> + .danger_lut_tbl = {0xf, 0xffff, 0x0},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc8180x_qos_linear),
> .entries = sc8180x_qos_linear
> @@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
> .mdss_irqs = IRQ_SC8180X_MASK,
> };
>
> +static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
> + .caps = &sc8280xp_dpu_caps,
> + .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
> + .mdp = sc8280xp_mdp,
> + .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
> + .ctl = sc8280xp_ctl,
> + .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
> + .sspp = sc8280xp_sspp,
> + .mixer_count = ARRAY_SIZE(sc8280xp_lm),
> + .mixer = sc8280xp_lm,
> + .dspp_count = ARRAY_SIZE(sm8150_dspp),
> + .dspp = sm8150_dspp,
> + .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
> + .pingpong = sc8280xp_pp,
> + .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
> + .merge_3d = sc8280xp_merge_3d,
> + .intf_count = ARRAY_SIZE(sc8280xp_intf),
> + .intf = sc8280xp_intf,
> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> + .vbif = sdm845_vbif,
> + .perf = &sc8280xp_perf_data,
> + .mdss_irqs = IRQ_SC8280XP_MASK,
> +};
> +
> static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
> .caps = &sm8250_dpu_caps,
> .mdp_count = ARRAY_SIZE(sm8250_mdp),
> @@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> { .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
> { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
> { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> + { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
> };
>
> const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 3b645d5aa9aa..6897b35c18fa 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -47,6 +47,7 @@
> #define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
> #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> +#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
>
> #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
> #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index cf1b6d84c18a..27d74c4d8a98 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -35,6 +35,9 @@
> #define MDP_INTF_3_OFF_REV_7xxx 0x37000
> #define MDP_INTF_4_OFF_REV_7xxx 0x38000
> #define MDP_INTF_5_OFF_REV_7xxx 0x39000
> +#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
> +#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
> +#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
>
> /**
> * struct dpu_intr_reg - array of DPU register sets
> @@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
> },
> + [MDP_INTF6_7xxx_INTR] = {
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> + [MDP_INTF7_7xxx_INTR] = {
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> + [MDP_INTF8_7xxx_INTR] = {
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
> + },
> };
>
> #define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 46443955443c..425465011c80 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
> MDP_INTF3_7xxx_INTR,
> MDP_INTF4_7xxx_INTR,
> MDP_INTF5_7xxx_INTR,
> + MDP_INTF6_7xxx_INTR,
> + MDP_INTF7_7xxx_INTR,
> + MDP_INTF8_7xxx_INTR,
> MDP_INTR_MAX,
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d3b0ed0a9c6c..d595096a4b1f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -214,6 +214,8 @@ enum dpu_intf {
> INTF_4,
> INTF_5,
> INTF_6,
> + INTF_7,
> + INTF_8,
> INTF_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index b71199511a52..30f894864cca 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
> { .compatible = "qcom,sc7180-dpu", },
> { .compatible = "qcom,sc7280-dpu", },
> { .compatible = "qcom,sc8180x-dpu", },
> + { .compatible = "qcom,sc8280xp-dpu", },
> { .compatible = "qcom,sm6115-dpu", },
> { .compatible = "qcom,sm8150-dpu", },
> { .compatible = "qcom,sm8250-dpu", },
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index d4e0ef608950..b2789efd59e8 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -61,6 +61,7 @@ enum msm_dp_controller {
> MSM_DP_CONTROLLER_0,
> MSM_DP_CONTROLLER_1,
> MSM_DP_CONTROLLER_2,
> + MSM_DP_CONTROLLER_3,
> MSM_DP_CONTROLLER_COUNT,
> };
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 03/12] drm/msm: Introduce SC8280XP MDSS
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-08 23:32 ` Kuogee Hsieh
-1 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:32 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Add compatible for the SC8280XP Mobile Display Subsystem and
> initialization for version 8.0.0.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> index 86b28add1fff..8677e74868cf 100644
> --- a/drivers/gpu/drm/msm/msm_mdss.c
> +++ b/drivers/gpu/drm/msm/msm_mdss.c
> @@ -287,6 +287,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> case DPU_HW_VER_720:
> msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
> break;
> + case DPU_HW_VER_800:
> + msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
> + break;
> }
>
> return ret;
> @@ -513,6 +516,7 @@ static const struct of_device_id mdss_dt_match[] = {
> { .compatible = "qcom,sc7180-mdss" },
> { .compatible = "qcom,sc7280-mdss" },
> { .compatible = "qcom,sc8180x-mdss" },
> + { .compatible = "qcom,sc8280xp-mdss" },
> { .compatible = "qcom,sm6115-mdss" },
> { .compatible = "qcom,sm8150-mdss" },
> { .compatible = "qcom,sm8250-mdss" },
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 03/12] drm/msm: Introduce SC8280XP MDSS
@ 2022-12-08 23:32 ` Kuogee Hsieh
0 siblings, 0 replies; 68+ messages in thread
From: Kuogee Hsieh @ 2022-12-08 23:32 UTC (permalink / raw)
To: Bjorn Andersson, Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Add compatible for the SC8280XP Mobile Display Subsystem and
> initialization for version 8.0.0.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> index 86b28add1fff..8677e74868cf 100644
> --- a/drivers/gpu/drm/msm/msm_mdss.c
> +++ b/drivers/gpu/drm/msm/msm_mdss.c
> @@ -287,6 +287,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> case DPU_HW_VER_720:
> msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
> break;
> + case DPU_HW_VER_800:
> + msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
> + break;
> }
>
> return ret;
> @@ -513,6 +516,7 @@ static const struct of_device_id mdss_dt_match[] = {
> { .compatible = "qcom,sc7180-mdss" },
> { .compatible = "qcom,sc7280-mdss" },
> { .compatible = "qcom,sc8180x-mdss" },
> + { .compatible = "qcom,sc8280xp-mdss" },
> { .compatible = "qcom,sm6115-mdss" },
> { .compatible = "qcom,sm8150-mdss" },
> { .compatible = "qcom,sm8250-mdss" },
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-09 2:49 ` Steev Klimaszewski
-1 siblings, 0 replies; 68+ messages in thread
From: Steev Klimaszewski @ 2022-12-09 2:49 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Wed, Dec 7, 2022 at 4:00 PM Bjorn Andersson
<quic_bjorande@quicinc.com> wrote:
>
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
>
> The patches was previously sent separately, but submitting them together
> here as they (except dts addition) goes in the same tree.
>
> Bjorn Andersson (12):
> dt-bindings: display/msm: Add binding for SC8280XP MDSS
> drm/msm/dpu: Introduce SC8280XP
> drm/msm: Introduce SC8280XP MDSS
> dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
> drm/msm/dp: Stop using DP id as index in desc
> drm/msm/dp: Add DP and EDP compatibles for SC8280XP
> drm/msm/dp: Add SDM845 DisplayPort instance
> drm/msm/dp: Rely on hpd_enable/disable callbacks
> drm/msm/dp: Implement hpd_notify()
> arm64: dts: qcom: sc8280xp: Define some of the display blocks
> arm64: dts: qcom: sc8280xp-crd: Enable EDP
> arm64: dts: qcom: sa8295-adp: Enable DP instances
>
> .../bindings/display/msm/dp-controller.yaml | 3 +
> .../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++
> .../display/msm/qcom,sc8280xp-mdss.yaml | 143 +++
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++-
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 +-
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 +++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/dp/dp_display.c | 151 ++--
> drivers/gpu/drm/msm/dp/dp_display.h | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.c | 3 +
> drivers/gpu/drm/msm/dp/dp_drm.h | 4 +
> drivers/gpu/drm/msm/msm_drv.h | 1 +
> drivers/gpu/drm/msm/msm_mdss.c | 4 +
> 18 files changed, 1770 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
>
> --
> 2.37.3
>
Tested on Lenovo Thinkpad X13s
Tested-by: Steev Klimaszewski <steev@kali.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2022-12-09 2:49 ` Steev Klimaszewski
0 siblings, 0 replies; 68+ messages in thread
From: Steev Klimaszewski @ 2022-12-09 2:49 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Wed, Dec 7, 2022 at 4:00 PM Bjorn Andersson
<quic_bjorande@quicinc.com> wrote:
>
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
>
> The patches was previously sent separately, but submitting them together
> here as they (except dts addition) goes in the same tree.
>
> Bjorn Andersson (12):
> dt-bindings: display/msm: Add binding for SC8280XP MDSS
> drm/msm/dpu: Introduce SC8280XP
> drm/msm: Introduce SC8280XP MDSS
> dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
> drm/msm/dp: Stop using DP id as index in desc
> drm/msm/dp: Add DP and EDP compatibles for SC8280XP
> drm/msm/dp: Add SDM845 DisplayPort instance
> drm/msm/dp: Rely on hpd_enable/disable callbacks
> drm/msm/dp: Implement hpd_notify()
> arm64: dts: qcom: sc8280xp: Define some of the display blocks
> arm64: dts: qcom: sc8280xp-crd: Enable EDP
> arm64: dts: qcom: sa8295-adp: Enable DP instances
>
> .../bindings/display/msm/dp-controller.yaml | 3 +
> .../display/msm/qcom,sc8280xp-dpu.yaml | 122 +++
> .../display/msm/qcom,sc8280xp-mdss.yaml | 143 +++
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++-
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 +-
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 +++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/dp/dp_display.c | 151 ++--
> drivers/gpu/drm/msm/dp/dp_display.h | 1 +
> drivers/gpu/drm/msm/dp/dp_drm.c | 3 +
> drivers/gpu/drm/msm/dp/dp_drm.h | 4 +
> drivers/gpu/drm/msm/msm_drv.h | 1 +
> drivers/gpu/drm/msm/msm_mdss.c | 4 +
> 18 files changed, 1770 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
>
> --
> 2.37.3
>
Tested on Lenovo Thinkpad X13s
Tested-by: Steev Klimaszewski <steev@kali.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-09 10:35 ` Johan Hovold
-1 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:35 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Wed, Dec 07, 2022 at 02:00:11PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> and link it together with the backlight control.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index f09810e3d956..a7d2384cbbe8 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -20,7 +20,7 @@ aliases {
> serial0 = &qup2_uart17;
> };
>
> - backlight {
> + backlight: backlight {
> compatible = "pwm-backlight";
> pwms = <&pmc8280c_lpg 3 1000000>;
> enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> @@ -34,6 +34,22 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + vreg_edp_3p3: regulator-edp-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_EDP_3P3";
Please use the net name from the schematics here (i.e. "VCC3LCD").
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_reg_en>;
> +
> + regulator-boot-on;
> + };
> +
> vreg_edp_bl: regulator-edp-bl {
> compatible = "regulator-fixed";
>
> @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&dispcc0 {
> + status = "okay";
> +};
> +
> +&mdss0 {
> + status = "okay";
> +};
> +
> +&mdss0_dp3 {
> + compatible = "qcom,sc8280xp-edp";
> + status = "okay";
Please move the status property last (i.e. after data-lanes).
> +
> + data-lanes = <0 1 2 3>;
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&vreg_edp_3p3>;
> +
> + backlight = <&backlight>;
> +
> + ports {
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss0_dp3_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_out: endpoint {
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
Same here.
> +
> + vdda-phy-supply = <&vreg_l6b>;
> + vdda-pll-supply = <&vreg_l3b>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio25";
> + function = "gpio";
> + output-enable;
'output-enable' is not valid for tlmm and causes the settings to be
rejected:
sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
@ 2022-12-09 10:35 ` Johan Hovold
0 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:35 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Wed, Dec 07, 2022 at 02:00:11PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> and link it together with the backlight control.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index f09810e3d956..a7d2384cbbe8 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -20,7 +20,7 @@ aliases {
> serial0 = &qup2_uart17;
> };
>
> - backlight {
> + backlight: backlight {
> compatible = "pwm-backlight";
> pwms = <&pmc8280c_lpg 3 1000000>;
> enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> @@ -34,6 +34,22 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + vreg_edp_3p3: regulator-edp-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_EDP_3P3";
Please use the net name from the schematics here (i.e. "VCC3LCD").
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_reg_en>;
> +
> + regulator-boot-on;
> + };
> +
> vreg_edp_bl: regulator-edp-bl {
> compatible = "regulator-fixed";
>
> @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&dispcc0 {
> + status = "okay";
> +};
> +
> +&mdss0 {
> + status = "okay";
> +};
> +
> +&mdss0_dp3 {
> + compatible = "qcom,sc8280xp-edp";
> + status = "okay";
Please move the status property last (i.e. after data-lanes).
> +
> + data-lanes = <0 1 2 3>;
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&vreg_edp_3p3>;
> +
> + backlight = <&backlight>;
> +
> + ports {
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss0_dp3_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_out: endpoint {
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
Same here.
> +
> + vdda-phy-supply = <&vreg_l6b>;
> + vdda-pll-supply = <&vreg_l3b>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio25";
> + function = "gpio";
> + output-enable;
'output-enable' is not valid for tlmm and causes the settings to be
rejected:
sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-09 10:44 ` Johan Hovold
-1 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:44 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Wed, Dec 07, 2022 at 02:00:12PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
>
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
> 1 file changed, 241 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 6c29d7d757e0..d55c8c5304cc 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +&mdss0_dp2 {
> + status = "okay";
Please move 'status' last.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp0_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp2_phy {
> + status = "okay";
Same here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss0_dp3 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp1_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
And here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1 {
> + status = "okay";
> +};
> +
> +&mdss1_dp0 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp0_phy_out: endpoint {
> + remote-endpoint = <&dp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp0_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp1 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp1_phy_out: endpoint {
> + remote-endpoint = <&dp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp1_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp2 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp2_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp3 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp3_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
@ 2022-12-09 10:44 ` Johan Hovold
0 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:44 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Wed, Dec 07, 2022 at 02:00:12PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
>
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
> 1 file changed, 241 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 6c29d7d757e0..d55c8c5304cc 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +&mdss0_dp2 {
> + status = "okay";
Please move 'status' last.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp0_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp2_phy {
> + status = "okay";
Same here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss0_dp3 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp1_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
And here.
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1 {
> + status = "okay";
> +};
> +
> +&mdss1_dp0 {
> + status = "okay";
And here.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp0_phy_out: endpoint {
> + remote-endpoint = <&dp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp0_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp1 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp1_phy_out: endpoint {
> + remote-endpoint = <&dp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp1_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp2 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp2_phy_out: endpoint {
> + remote-endpoint = <&edp2_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp2_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp3 {
> + status = "okay";
Ditto.
> +
> + data-lanes = <0 1 2 3>;
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss1_dp3_phy_out: endpoint {
> + remote-endpoint = <&edp3_connector_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss1_dp3_phy {
> + status = "okay";
Ditto.
> +
> + vdda-phy-supply = <&vreg_l11g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-09 10:52 ` Johan Hovold
-1 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:52 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Wed, Dec 07, 2022 at 02:00:10PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> 1 file changed, 838 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> + mdss0: display-subsystem@ae00000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc0 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1000 0x402>;
> +
> + status = "disabled";
Please move status last.
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss0_mdp: display-controller@ae01000 {
[...]
> + mdss1: display-subsystem@22000000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x22000000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc1 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1800 0x402>;
> +
> + status = "disabled";
Same here.
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss1_mdp: display-controller@22001000 {
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
@ 2022-12-09 10:52 ` Johan Hovold
0 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-09 10:52 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Wed, Dec 07, 2022 at 02:00:10PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> 1 file changed, 838 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> + mdss0: display-subsystem@ae00000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc0 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1000 0x402>;
> +
> + status = "disabled";
Please move status last.
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss0_mdp: display-controller@ae01000 {
[...]
> + mdss1: display-subsystem@22000000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x22000000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc1 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1800 0x402>;
> +
> + status = "disabled";
Same here.
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss1_mdp: display-controller@22001000 {
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
2022-12-07 22:00 ` Bjorn Andersson
@ 2022-12-09 11:30 ` Dmitry Baryshkov
-1 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-09 11:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On Thu, 8 Dec 2022 at 00:00, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
>
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> and link it together with the backlight control.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index f09810e3d956..a7d2384cbbe8 100644
[skipped]
> @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&dispcc0 {
> + status = "okay";
> +};
> +
> +&mdss0 {
> + status = "okay";
> +};
> +
> +&mdss0_dp3 {
> + compatible = "qcom,sc8280xp-edp";
> + status = "okay";
> +
> + data-lanes = <0 1 2 3>;
I hope to land Kuogee patches that move data-lanes to the endpoint
node, where they belong. Do we have any good way to proceed here?
Or would it be easier to land this patch as is and then, maybe next
cycle, move the property?
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&vreg_edp_3p3>;
> +
> + backlight = <&backlight>;
> +
> + ports {
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss0_dp3_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_out: endpoint {
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l6b>;
> + vdda-pll-supply = <&vreg_l3b>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio25";
> + function = "gpio";
> + output-enable;
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
> --
> 2.37.3
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
@ 2022-12-09 11:30 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2022-12-09 11:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On Thu, 8 Dec 2022 at 00:00, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
>
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> and link it together with the backlight control.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index f09810e3d956..a7d2384cbbe8 100644
[skipped]
> @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> };
> };
>
> +&dispcc0 {
> + status = "okay";
> +};
> +
> +&mdss0 {
> + status = "okay";
> +};
> +
> +&mdss0_dp3 {
> + compatible = "qcom,sc8280xp-edp";
> + status = "okay";
> +
> + data-lanes = <0 1 2 3>;
I hope to land Kuogee patches that move data-lanes to the endpoint
node, where they belong. Do we have any good way to proceed here?
Or would it be easier to land this patch as is and then, maybe next
cycle, move the property?
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&vreg_edp_3p3>;
> +
> + backlight = <&backlight>;
> +
> + ports {
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss0_dp3_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss0_dp3_out: endpoint {
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss0_dp3_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l6b>;
> + vdda-pll-supply = <&vreg_l3b>;
> +};
> +
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio25";
> + function = "gpio";
> + output-enable;
> + };
> +
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
> --
> 2.37.3
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
2022-12-09 10:35 ` Johan Hovold
@ 2022-12-13 15:10 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-13 15:10 UTC (permalink / raw)
To: Johan Hovold
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Fri, Dec 09, 2022 at 11:35:23AM +0100, Johan Hovold wrote:
> On Wed, Dec 07, 2022 at 02:00:11PM -0800, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >
> > The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> > and link it together with the backlight control.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >
> > Changes since v4:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> > 1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > index f09810e3d956..a7d2384cbbe8 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > @@ -20,7 +20,7 @@ aliases {
> > serial0 = &qup2_uart17;
> > };
> >
> > - backlight {
> > + backlight: backlight {
> > compatible = "pwm-backlight";
> > pwms = <&pmc8280c_lpg 3 1000000>;
> > enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> > @@ -34,6 +34,22 @@ chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> > + vreg_edp_3p3: regulator-edp-3p3 {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_EDP_3P3";
>
> Please use the net name from the schematics here (i.e. "VCC3LCD").
>
This is the name used in the CRD schematics.
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&edp_reg_en>;
> > +
> > + regulator-boot-on;
> > + };
> > +
> > vreg_edp_bl: regulator-edp-bl {
> > compatible = "regulator-fixed";
> >
> > @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> > };
> > };
> >
> > +&dispcc0 {
> > + status = "okay";
> > +};
> > +
> > +&mdss0 {
> > + status = "okay";
> > +};
> > +
> > +&mdss0_dp3 {
> > + compatible = "qcom,sc8280xp-edp";
> > + status = "okay";
>
> Please move the status property last (i.e. after data-lanes).
>
Sorry for missing that.
> > +
> > + data-lanes = <0 1 2 3>;
> > +
> > + aux-bus {
> > + panel {
> > + compatible = "edp-panel";
> > + power-supply = <&vreg_edp_3p3>;
> > +
> > + backlight = <&backlight>;
> > +
> > + ports {
> > + port {
> > + edp_panel_in: endpoint {
> > + remote-endpoint = <&mdss0_dp3_out>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > + ports {
> > + port@1 {
> > + reg = <1>;
> > + mdss0_dp3_out: endpoint {
> > + remote-endpoint = <&edp_panel_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&mdss0_dp3_phy {
> > + status = "okay";
>
> Same here.
>
Ditto.
> > +
> > + vdda-phy-supply = <&vreg_l6b>;
> > + vdda-pll-supply = <&vreg_l3b>;
> > +};
> > +
> > &pcie2a {
> > perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> > wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> > @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> > &tlmm {
> > gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
> >
> > + edp_reg_en: edp-reg-en-state {
> > + pins = "gpio25";
> > + function = "gpio";
> > + output-enable;
>
> 'output-enable' is not valid for tlmm and causes the settings to be
> rejected:
>
> sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
> reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
>
Thanks for spotting that, it doesn't seem to be needed for the gpio-regulator
driver anyways...
Regards,
Bjorn
> > + };
> > +
> > kybd_default: kybd-default-state {
> > disable-pins {
> > pins = "gpio102";
>
> Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
@ 2022-12-13 15:10 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2022-12-13 15:10 UTC (permalink / raw)
To: Johan Hovold
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Fri, Dec 09, 2022 at 11:35:23AM +0100, Johan Hovold wrote:
> On Wed, Dec 07, 2022 at 02:00:11PM -0800, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >
> > The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
> > and link it together with the backlight control.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >
> > Changes since v4:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> > 1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > index f09810e3d956..a7d2384cbbe8 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > @@ -20,7 +20,7 @@ aliases {
> > serial0 = &qup2_uart17;
> > };
> >
> > - backlight {
> > + backlight: backlight {
> > compatible = "pwm-backlight";
> > pwms = <&pmc8280c_lpg 3 1000000>;
> > enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> > @@ -34,6 +34,22 @@ chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> > + vreg_edp_3p3: regulator-edp-3p3 {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_EDP_3P3";
>
> Please use the net name from the schematics here (i.e. "VCC3LCD").
>
This is the name used in the CRD schematics.
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&edp_reg_en>;
> > +
> > + regulator-boot-on;
> > + };
> > +
> > vreg_edp_bl: regulator-edp-bl {
> > compatible = "regulator-fixed";
> >
> > @@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> > };
> > };
> >
> > +&dispcc0 {
> > + status = "okay";
> > +};
> > +
> > +&mdss0 {
> > + status = "okay";
> > +};
> > +
> > +&mdss0_dp3 {
> > + compatible = "qcom,sc8280xp-edp";
> > + status = "okay";
>
> Please move the status property last (i.e. after data-lanes).
>
Sorry for missing that.
> > +
> > + data-lanes = <0 1 2 3>;
> > +
> > + aux-bus {
> > + panel {
> > + compatible = "edp-panel";
> > + power-supply = <&vreg_edp_3p3>;
> > +
> > + backlight = <&backlight>;
> > +
> > + ports {
> > + port {
> > + edp_panel_in: endpoint {
> > + remote-endpoint = <&mdss0_dp3_out>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > + ports {
> > + port@1 {
> > + reg = <1>;
> > + mdss0_dp3_out: endpoint {
> > + remote-endpoint = <&edp_panel_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&mdss0_dp3_phy {
> > + status = "okay";
>
> Same here.
>
Ditto.
> > +
> > + vdda-phy-supply = <&vreg_l6b>;
> > + vdda-pll-supply = <&vreg_l3b>;
> > +};
> > +
> > &pcie2a {
> > perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> > wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> > @@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> > &tlmm {
> > gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
> >
> > + edp_reg_en: edp-reg-en-state {
> > + pins = "gpio25";
> > + function = "gpio";
> > + output-enable;
>
> 'output-enable' is not valid for tlmm and causes the settings to be
> rejected:
>
> sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
> reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
>
Thanks for spotting that, it doesn't seem to be needed for the gpio-regulator
driver anyways...
Regards,
Bjorn
> > + };
> > +
> > kybd_default: kybd-default-state {
> > disable-pins {
> > pins = "gpio102";
>
> Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
2022-12-13 15:10 ` Bjorn Andersson
@ 2022-12-13 16:26 ` Johan Hovold
-1 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-13 16:26 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Baryshkov, Rob Clark, Abhinav Kumar, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Kalyan Thota, Jessica Zhang,
Kuogee Hsieh, Johan Hovold, Sankeerth Billakanti, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel
On Tue, Dec 13, 2022 at 07:10:14AM -0800, Bjorn Andersson wrote:
> On Fri, Dec 09, 2022 at 11:35:23AM +0100, Johan Hovold wrote:
> > > + edp_reg_en: edp-reg-en-state {
> > > + pins = "gpio25";
> > > + function = "gpio";
> > > + output-enable;
> >
> > 'output-enable' is not valid for tlmm and causes the settings to be
> > rejected:
> >
> > sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
> > reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
> >
>
> Thanks for spotting that, it doesn't seem to be needed for the gpio-regulator
> driver anyways...
I noticed that the firmware on both CRD and X13s sets the drive strength
to 16 here. Should we specify that too (and disable the pull up)
instead of relying on the firmware configuration?
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP
@ 2022-12-13 16:26 ` Johan Hovold
0 siblings, 0 replies; 68+ messages in thread
From: Johan Hovold @ 2022-12-13 16:26 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Dmitry Baryshkov, Jessica Zhang,
Johan Hovold
On Tue, Dec 13, 2022 at 07:10:14AM -0800, Bjorn Andersson wrote:
> On Fri, Dec 09, 2022 at 11:35:23AM +0100, Johan Hovold wrote:
> > > + edp_reg_en: edp-reg-en-state {
> > > + pins = "gpio25";
> > > + function = "gpio";
> > > + output-enable;
> >
> > 'output-enable' is not valid for tlmm and causes the settings to be
> > rejected:
> >
> > sc8280xp-tlmm f100000.pinctrl: pin_config_group_set op failed for group 25
> > reg-fixed-voltage regulator-edp-3p3: Error applying setting, reverse things back
> >
>
> Thanks for spotting that, it doesn't seem to be needed for the gpio-regulator
> driver anyways...
I noticed that the firmware on both CRD and X13s sets the drive strength
to 16 here. Should we specify that too (and disable the pull up)
instead of relying on the firmware configuration?
Johan
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
2022-12-08 23:31 ` Kuogee Hsieh
@ 2023-01-08 21:47 ` Dmitry Baryshkov
-1 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-08 21:47 UTC (permalink / raw)
To: Kuogee Hsieh, Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Johan Hovold, Sankeerth Billakanti,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel
On 09/12/2022 01:31, Kuogee Hsieh wrote:
>
> On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>>
>> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
>> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
>> necessary definitions and describe the DPU in the SC8280XP.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>
>> Changes since v4:
>> - Fix highest_bank_bit, based on downstream
>> - Add ubwc_swizzle
>> - Use CTL_SC7280_MASK instead of listing the bits directly
>>
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>> drivers/gpu/drm/msm/msm_drv.h | 1 +
>> 7 files changed, 243 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 2196e205efa5..0315fe68af2f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -124,6 +124,19 @@
>> BIT(MDP_AD4_0_INTR) | \
>> BIT(MDP_AD4_1_INTR))
>> +#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
>> + BIT(MDP_SSPP_TOP0_INTR2) | \
>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
>> + BIT(MDP_INTF0_7xxx_INTR) | \
>> + BIT(MDP_INTF1_7xxx_INTR) | \
>> + BIT(MDP_INTF2_7xxx_INTR) | \
>> + BIT(MDP_INTF3_7xxx_INTR) | \
>> + BIT(MDP_INTF4_7xxx_INTR) | \
>> + BIT(MDP_INTF5_7xxx_INTR) | \
>> + BIT(MDP_INTF6_7xxx_INTR) | \
>> + BIT(MDP_INTF7_7xxx_INTR) | \
>> + BIT(MDP_INTF8_7xxx_INTR))
>> +
>> #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
>> BIT(DPU_WB_UBWC) | \
>> BIT(DPU_WB_YUV_CONFIG) | \
>> @@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
>> .max_vdeci_exp = MAX_VERT_DECIMATION,
>> };
>> +static const struct dpu_caps sc8280xp_dpu_caps = {
>> + .max_mixer_width = 2560,
>> + .max_mixer_blendstages = 11,
>> + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
>> + .ubwc_version = DPU_HW_UBWC_VER_40,
>> + .has_src_split = true,
>> + .has_dim_layer = true,
>> + .has_idle_pc = true,
>> + .has_3d_merge = true,
>> + .max_linewidth = 5120,
>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>> +};
>> +
>> static const struct dpu_caps sm8250_dpu_caps = {
>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>> .max_mixer_blendstages = 0xb,
>> @@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
>> },
>> };
>> +static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
>> + {
>> + .name = "top_0", .id = MDP_TOP,
>> + .base = 0x0, .len = 0x494,
>> + .features = 0,
>> + .highest_bank_bit = 2,
>> + .ubwc_swizzle = 6,
>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off =
>> 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off =
>> 8},
>> + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off =
>> 20},
>> + },
>> +};
>> +
>> static const struct dpu_mdp_cfg qcm2290_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> @@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
>> },
>> };
>> +static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
>> + {
>> + .name = "ctl_0", .id = CTL_0,
>> + .base = 0x15000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
>> + },
>> + {
>> + .name = "ctl_1", .id = CTL_1,
>> + .base = 0x16000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
>> + },
>> + {
>> + .name = "ctl_2", .id = CTL_2,
>> + .base = 0x17000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
>> + },
>> + {
>> + .name = "ctl_3", .id = CTL_3,
>> + .base = 0x18000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
>> + },
>> + {
>> + .name = "ctl_4", .id = CTL_4,
>> + .base = 0x19000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
>> + },
>> + {
>> + .name = "ctl_5", .id = CTL_5,
>> + .base = 0x1a000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
>> + },
>> +};
>> +
>> static const struct dpu_ctl_cfg sm8150_ctl[] = {
>> {
>> .name = "ctl_0", .id = CTL_0,
>> @@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
>> sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>> };
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
>> + _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
>> + _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
>> + _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
>> + _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
>> +
>> +static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
>> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
>> + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
>> + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
>> + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
>> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
>> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>> + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
>> + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
>> + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
>> + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
>> + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
>> + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>> +};
>> #define _VIG_SBLK_NOSCALE(num, sdma_pri) \
>> { \
>> @@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
>> &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
>> };
>> +/* SC8280XP */
>> +
>> +static const struct dpu_lm_cfg sc8280xp_lm[] = {
>> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_0, LM_1, DSPP_0),
>> + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_1, LM_0, DSPP_1),
>> + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_2, LM_3, DSPP_2),
>> + LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_3, LM_2, DSPP_3),
>> + LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_4, LM_5, 0),
>> + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_5, LM_4, 0),
>> +};
>> +
>> /* SM8150 */
>> static const struct dpu_lm_cfg sm8150_lm[] = {
>> @@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
>> PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0,
>> sdm845_pp_sblk_te, -1, -1),
>> };
>> +static struct dpu_pingpong_cfg sc8280xp_pp[] = {
>> + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
>> + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
>> + PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
>> + PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
>> + PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
>> + PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
>> +};
>> +
>> static const struct dpu_pingpong_cfg sm8150_pp[] = {
>> PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
>> @@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg
>> sm8150_merge_3d[] = {
>> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
>> };
>> +static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
>> + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
>> + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
>> + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
>> +};
>> +
>> /*************************************************************
>> * DSC sub blocks config
>> *************************************************************/
>> @@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[]
>> = {
>> INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP,
>> MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>> };
>> +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for
>> now */
>> +static const struct dpu_intf_cfg sc8280xp_intf[] = {
>> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
>> + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24,
>> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
>> + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24,
>> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
>> + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE,
>> MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
>> + INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
>> + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>> + INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
>> + INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE,
>> MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
>> + INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE,
>> MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
>> +};
>> +
>> static const struct dpu_intf_cfg qcm2290_intf[] = {
>> INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
>> INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24,
>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
>> @@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
>> },
>> };
>> +static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
>> + .base = 0x0,
>> + .version = 0x00020000,
>> + .trigger_sel_off = 0x119c,
>> + .xin_id = 7,
>> + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
>> +};
>> +
>> static const struct dpu_reg_dma_cfg sdm845_regdma = {
>> .base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
>> };
>> @@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg
>> sc8180x_perf_data = {
>> .min_llcc_ib = 800000,
>> .min_dram_ib = 800000,
>> .danger_lut_tbl = {0xf, 0xffff, 0x0},
>> + .qos_lut_tbl = {
>> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
>> + .entries = sc7180_qos_linear
>> + },
>> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
>> + .entries = sc7180_qos_macrotile
>> + },
>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
>> + .entries = sc7180_qos_nrt
>> + },
>> + /* TODO: macrotile-qseed is different from macrotile */
>> + },
>> + .cdp_cfg = {
>> + {.rd_enable = 1, .wr_enable = 1},
>> + {.rd_enable = 1, .wr_enable = 0}
>> + },
>> + .clk_inefficiency_factor = 105,
>> + .bw_inefficiency_factor = 120,
>> +};
>> +
>> +static const struct dpu_perf_cfg sc8280xp_perf_data = {
>> + .max_bw_low = 13600000,
>> + .max_bw_high = 18200000,
>> + .min_core_ib = 2500000,
>> + .min_llcc_ib = 0,
>> + .min_dram_ib = 800000,
>> + .danger_lut_tbl = {0xf, 0xffff, 0x0},
>> .qos_lut_tbl = {
>> {.nentry = ARRAY_SIZE(sc8180x_qos_linear),
>> .entries = sc8180x_qos_linear
It seems this chunk got wrong somehow during rebases. It changes sc8180x
to use sc7280 QoS settings. I'll update it to keep the sc8180x data
intact while applying.
>> @@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg
>> sc8180x_dpu_cfg = {
>> .mdss_irqs = IRQ_SC8180X_MASK,
>> };
>> +static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
>> + .caps = &sc8280xp_dpu_caps,
>> + .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
>> + .mdp = sc8280xp_mdp,
>> + .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
>> + .ctl = sc8280xp_ctl,
>> + .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
>> + .sspp = sc8280xp_sspp,
>> + .mixer_count = ARRAY_SIZE(sc8280xp_lm),
>> + .mixer = sc8280xp_lm,
>> + .dspp_count = ARRAY_SIZE(sm8150_dspp),
>> + .dspp = sm8150_dspp,
>> + .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
>> + .pingpong = sc8280xp_pp,
>> + .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
>> + .merge_3d = sc8280xp_merge_3d,
>> + .intf_count = ARRAY_SIZE(sc8280xp_intf),
>> + .intf = sc8280xp_intf,
>> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
>> + .vbif = sdm845_vbif,
>> + .perf = &sc8280xp_perf_data,
>> + .mdss_irqs = IRQ_SC8280XP_MASK,
>> +};
>> +
>> static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
>> .caps = &sm8250_dpu_caps,
>> .mdp_count = ARRAY_SIZE(sm8250_mdp),
>> @@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler
>> cfg_handler[] = {
>> { .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
>> { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
>> { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
>> + { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
>> };
>> const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 3b645d5aa9aa..6897b35c18fa 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -47,6 +47,7 @@
>> #define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
>> #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
>> +#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
>> #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev),
>> DPU_HW_VER_170)
>> #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev),
>> DPU_HW_VER_300)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> index cf1b6d84c18a..27d74c4d8a98 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> @@ -35,6 +35,9 @@
>> #define MDP_INTF_3_OFF_REV_7xxx 0x37000
>> #define MDP_INTF_4_OFF_REV_7xxx 0x38000
>> #define MDP_INTF_5_OFF_REV_7xxx 0x39000
>> +#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
>> +#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
>> +#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
>> /**
>> * struct dpu_intr_reg - array of DPU register sets
>> @@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
>> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
>> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
>> },
>> + [MDP_INTF6_7xxx_INTR] = {
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> + [MDP_INTF7_7xxx_INTR] = {
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> + [MDP_INTF8_7xxx_INTR] = {
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> };
>> #define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> index 46443955443c..425465011c80 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> @@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
>> MDP_INTF3_7xxx_INTR,
>> MDP_INTF4_7xxx_INTR,
>> MDP_INTF5_7xxx_INTR,
>> + MDP_INTF6_7xxx_INTR,
>> + MDP_INTF7_7xxx_INTR,
>> + MDP_INTF8_7xxx_INTR,
>> MDP_INTR_MAX,
>> };
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> index d3b0ed0a9c6c..d595096a4b1f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> @@ -214,6 +214,8 @@ enum dpu_intf {
>> INTF_4,
>> INTF_5,
>> INTF_6,
>> + INTF_7,
>> + INTF_8,
>> INTF_MAX
>> };
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index b71199511a52..30f894864cca 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
>> { .compatible = "qcom,sc7180-dpu", },
>> { .compatible = "qcom,sc7280-dpu", },
>> { .compatible = "qcom,sc8180x-dpu", },
>> + { .compatible = "qcom,sc8280xp-dpu", },
>> { .compatible = "qcom,sm6115-dpu", },
>> { .compatible = "qcom,sm8150-dpu", },
>> { .compatible = "qcom,sm8250-dpu", },
>> diff --git a/drivers/gpu/drm/msm/msm_drv.h
>> b/drivers/gpu/drm/msm/msm_drv.h
>> index d4e0ef608950..b2789efd59e8 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.h
>> +++ b/drivers/gpu/drm/msm/msm_drv.h
>> @@ -61,6 +61,7 @@ enum msm_dp_controller {
>> MSM_DP_CONTROLLER_0,
>> MSM_DP_CONTROLLER_1,
>> MSM_DP_CONTROLLER_2,
>> + MSM_DP_CONTROLLER_3,
>> MSM_DP_CONTROLLER_COUNT,
>> };
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP
@ 2023-01-08 21:47 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-08 21:47 UTC (permalink / raw)
To: Kuogee Hsieh, Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, linux-kernel, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 09/12/2022 01:31, Kuogee Hsieh wrote:
>
> On 12/7/2022 2:00 PM, Bjorn Andersson wrote:
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>>
>> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
>> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
>> necessary definitions and describe the DPU in the SC8280XP.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>
>> Changes since v4:
>> - Fix highest_bank_bit, based on downstream
>> - Add ubwc_swizzle
>> - Use CTL_SC7280_MASK instead of listing the bits directly
>>
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 217 ++++++++++++++++++
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 ++
>> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 3 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>> drivers/gpu/drm/msm/msm_drv.h | 1 +
>> 7 files changed, 243 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 2196e205efa5..0315fe68af2f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -124,6 +124,19 @@
>> BIT(MDP_AD4_0_INTR) | \
>> BIT(MDP_AD4_1_INTR))
>> +#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
>> + BIT(MDP_SSPP_TOP0_INTR2) | \
>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
>> + BIT(MDP_INTF0_7xxx_INTR) | \
>> + BIT(MDP_INTF1_7xxx_INTR) | \
>> + BIT(MDP_INTF2_7xxx_INTR) | \
>> + BIT(MDP_INTF3_7xxx_INTR) | \
>> + BIT(MDP_INTF4_7xxx_INTR) | \
>> + BIT(MDP_INTF5_7xxx_INTR) | \
>> + BIT(MDP_INTF6_7xxx_INTR) | \
>> + BIT(MDP_INTF7_7xxx_INTR) | \
>> + BIT(MDP_INTF8_7xxx_INTR))
>> +
>> #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
>> BIT(DPU_WB_UBWC) | \
>> BIT(DPU_WB_YUV_CONFIG) | \
>> @@ -365,6 +378,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
>> .max_vdeci_exp = MAX_VERT_DECIMATION,
>> };
>> +static const struct dpu_caps sc8280xp_dpu_caps = {
>> + .max_mixer_width = 2560,
>> + .max_mixer_blendstages = 11,
>> + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
>> + .ubwc_version = DPU_HW_UBWC_VER_40,
>> + .has_src_split = true,
>> + .has_dim_layer = true,
>> + .has_idle_pc = true,
>> + .has_3d_merge = true,
>> + .max_linewidth = 5120,
>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>> +};
>> +
>> static const struct dpu_caps sm8250_dpu_caps = {
>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>> .max_mixer_blendstages = 0xb,
>> @@ -545,6 +572,25 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
>> },
>> };
>> +static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
>> + {
>> + .name = "top_0", .id = MDP_TOP,
>> + .base = 0x0, .len = 0x494,
>> + .features = 0,
>> + .highest_bank_bit = 2,
>> + .ubwc_swizzle = 6,
>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off =
>> 8},
>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off =
>> 8},
>> + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off =
>> 20},
>> + },
>> +};
>> +
>> static const struct dpu_mdp_cfg qcm2290_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> @@ -648,6 +694,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
>> },
>> };
>> +static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
>> + {
>> + .name = "ctl_0", .id = CTL_0,
>> + .base = 0x15000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
>> + },
>> + {
>> + .name = "ctl_1", .id = CTL_1,
>> + .base = 0x16000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
>> + },
>> + {
>> + .name = "ctl_2", .id = CTL_2,
>> + .base = 0x17000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
>> + },
>> + {
>> + .name = "ctl_3", .id = CTL_3,
>> + .base = 0x18000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
>> + },
>> + {
>> + .name = "ctl_4", .id = CTL_4,
>> + .base = 0x19000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
>> + },
>> + {
>> + .name = "ctl_5", .id = CTL_5,
>> + .base = 0x1a000, .len = 0x204,
>> + .features = CTL_SC7280_MASK,
>> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
>> + },
>> +};
>> +
>> static const struct dpu_ctl_cfg sm8150_ctl[] = {
>> {
>> .name = "ctl_0", .id = CTL_0,
>> @@ -926,6 +1011,33 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
>> sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>> };
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
>> + _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
>> + _VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
>> + _VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
>> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
>> + _VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
>> +
>> +static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
>> + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
>> + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
>> + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
>> + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
>> + sc8280xp_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
>> + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
>> + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>> + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
>> + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
>> + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
>> + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
>> + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
>> + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>> +};
>> #define _VIG_SBLK_NOSCALE(num, sdma_pri) \
>> { \
>> @@ -1034,6 +1146,17 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
>> &sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
>> };
>> +/* SC8280XP */
>> +
>> +static const struct dpu_lm_cfg sc8280xp_lm[] = {
>> + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_0, LM_1, DSPP_0),
>> + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_1, LM_0, DSPP_1),
>> + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_2, LM_3, DSPP_2),
>> + LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_3, LM_2, DSPP_3),
>> + LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_4, LM_5, 0),
>> + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, &sdm845_lm_sblk,
>> PINGPONG_5, LM_4, 0),
>> +};
>> +
>> /* SM8150 */
>> static const struct dpu_lm_cfg sm8150_lm[] = {
>> @@ -1192,6 +1315,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
>> PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0,
>> sdm845_pp_sblk_te, -1, -1),
>> };
>> +static struct dpu_pingpong_cfg sc8280xp_pp[] = {
>> + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
>> + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
>> + PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
>> + PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
>> + PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
>> + PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2,
>> sdm845_pp_sblk_te,
>> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
>> +};
>> +
>> static const struct dpu_pingpong_cfg sm8150_pp[] = {
>> PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0,
>> sdm845_pp_sblk_te,
>> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
>> @@ -1243,6 +1381,12 @@ static const struct dpu_merge_3d_cfg
>> sm8150_merge_3d[] = {
>> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
>> };
>> +static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
>> + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
>> + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
>> + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
>> +};
>> +
>> /*************************************************************
>> * DSC sub blocks config
>> *************************************************************/
>> @@ -1317,6 +1461,19 @@ static const struct dpu_intf_cfg sc8180x_intf[]
>> = {
>> INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP,
>> MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>> };
>> +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for
>> now */
>> +static const struct dpu_intf_cfg sc8280xp_intf[] = {
>> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
>> + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24,
>> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
>> + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24,
>> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
>> + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE,
>> MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
>> + INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
>> + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>> + INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2,
>> 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
>> + INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE,
>> MSM_DP_CONTROLLER_2, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
>> + INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE,
>> MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
>> +};
>> +
>> static const struct dpu_intf_cfg qcm2290_intf[] = {
>> INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
>> INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24,
>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
>> @@ -1419,6 +1576,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
>> },
>> };
>> +static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
>> + .base = 0x0,
>> + .version = 0x00020000,
>> + .trigger_sel_off = 0x119c,
>> + .xin_id = 7,
>> + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
>> +};
>> +
>> static const struct dpu_reg_dma_cfg sdm845_regdma = {
>> .base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
>> };
>> @@ -1690,6 +1855,33 @@ static const struct dpu_perf_cfg
>> sc8180x_perf_data = {
>> .min_llcc_ib = 800000,
>> .min_dram_ib = 800000,
>> .danger_lut_tbl = {0xf, 0xffff, 0x0},
>> + .qos_lut_tbl = {
>> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
>> + .entries = sc7180_qos_linear
>> + },
>> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
>> + .entries = sc7180_qos_macrotile
>> + },
>> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
>> + .entries = sc7180_qos_nrt
>> + },
>> + /* TODO: macrotile-qseed is different from macrotile */
>> + },
>> + .cdp_cfg = {
>> + {.rd_enable = 1, .wr_enable = 1},
>> + {.rd_enable = 1, .wr_enable = 0}
>> + },
>> + .clk_inefficiency_factor = 105,
>> + .bw_inefficiency_factor = 120,
>> +};
>> +
>> +static const struct dpu_perf_cfg sc8280xp_perf_data = {
>> + .max_bw_low = 13600000,
>> + .max_bw_high = 18200000,
>> + .min_core_ib = 2500000,
>> + .min_llcc_ib = 0,
>> + .min_dram_ib = 800000,
>> + .danger_lut_tbl = {0xf, 0xffff, 0x0},
>> .qos_lut_tbl = {
>> {.nentry = ARRAY_SIZE(sc8180x_qos_linear),
>> .entries = sc8180x_qos_linear
It seems this chunk got wrong somehow during rebases. It changes sc8180x
to use sc7280 QoS settings. I'll update it to keep the sc8180x data
intact while applying.
>> @@ -1937,6 +2129,30 @@ static const struct dpu_mdss_cfg
>> sc8180x_dpu_cfg = {
>> .mdss_irqs = IRQ_SC8180X_MASK,
>> };
>> +static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
>> + .caps = &sc8280xp_dpu_caps,
>> + .mdp_count = ARRAY_SIZE(sc8280xp_mdp),
>> + .mdp = sc8280xp_mdp,
>> + .ctl_count = ARRAY_SIZE(sc8280xp_ctl),
>> + .ctl = sc8280xp_ctl,
>> + .sspp_count = ARRAY_SIZE(sc8280xp_sspp),
>> + .sspp = sc8280xp_sspp,
>> + .mixer_count = ARRAY_SIZE(sc8280xp_lm),
>> + .mixer = sc8280xp_lm,
>> + .dspp_count = ARRAY_SIZE(sm8150_dspp),
>> + .dspp = sm8150_dspp,
>> + .pingpong_count = ARRAY_SIZE(sc8280xp_pp),
>> + .pingpong = sc8280xp_pp,
>> + .merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
>> + .merge_3d = sc8280xp_merge_3d,
>> + .intf_count = ARRAY_SIZE(sc8280xp_intf),
>> + .intf = sc8280xp_intf,
>> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
>> + .vbif = sdm845_vbif,
>> + .perf = &sc8280xp_perf_data,
>> + .mdss_irqs = IRQ_SC8280XP_MASK,
>> +};
>> +
>> static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
>> .caps = &sm8250_dpu_caps,
>> .mdp_count = ARRAY_SIZE(sm8250_mdp),
>> @@ -2024,6 +2240,7 @@ static const struct dpu_mdss_hw_cfg_handler
>> cfg_handler[] = {
>> { .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
>> { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
>> { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
>> + { .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
>> };
>> const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 3b645d5aa9aa..6897b35c18fa 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -47,6 +47,7 @@
>> #define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
>> #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
>> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
>> +#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
>> #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev),
>> DPU_HW_VER_170)
>> #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev),
>> DPU_HW_VER_300)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> index cf1b6d84c18a..27d74c4d8a98 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
>> @@ -35,6 +35,9 @@
>> #define MDP_INTF_3_OFF_REV_7xxx 0x37000
>> #define MDP_INTF_4_OFF_REV_7xxx 0x38000
>> #define MDP_INTF_5_OFF_REV_7xxx 0x39000
>> +#define MDP_INTF_6_OFF_REV_7xxx 0x3a000
>> +#define MDP_INTF_7_OFF_REV_7xxx 0x3b000
>> +#define MDP_INTF_8_OFF_REV_7xxx 0x3c000
>> /**
>> * struct dpu_intr_reg - array of DPU register sets
>> @@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
>> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
>> MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
>> },
>> + [MDP_INTF6_7xxx_INTR] = {
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> + [MDP_INTF7_7xxx_INTR] = {
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> + [MDP_INTF8_7xxx_INTR] = {
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
>> + MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
>> + },
>> };
>> #define DPU_IRQ_REG(irq_idx) (irq_idx / 32)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> index 46443955443c..425465011c80 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
>> @@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
>> MDP_INTF3_7xxx_INTR,
>> MDP_INTF4_7xxx_INTR,
>> MDP_INTF5_7xxx_INTR,
>> + MDP_INTF6_7xxx_INTR,
>> + MDP_INTF7_7xxx_INTR,
>> + MDP_INTF8_7xxx_INTR,
>> MDP_INTR_MAX,
>> };
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> index d3b0ed0a9c6c..d595096a4b1f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> @@ -214,6 +214,8 @@ enum dpu_intf {
>> INTF_4,
>> INTF_5,
>> INTF_6,
>> + INTF_7,
>> + INTF_8,
>> INTF_MAX
>> };
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index b71199511a52..30f894864cca 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1292,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
>> { .compatible = "qcom,sc7180-dpu", },
>> { .compatible = "qcom,sc7280-dpu", },
>> { .compatible = "qcom,sc8180x-dpu", },
>> + { .compatible = "qcom,sc8280xp-dpu", },
>> { .compatible = "qcom,sm6115-dpu", },
>> { .compatible = "qcom,sm8150-dpu", },
>> { .compatible = "qcom,sm8250-dpu", },
>> diff --git a/drivers/gpu/drm/msm/msm_drv.h
>> b/drivers/gpu/drm/msm/msm_drv.h
>> index d4e0ef608950..b2789efd59e8 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.h
>> +++ b/drivers/gpu/drm/msm/msm_drv.h
>> @@ -61,6 +61,7 @@ enum msm_dp_controller {
>> MSM_DP_CONTROLLER_0,
>> MSM_DP_CONTROLLER_1,
>> MSM_DP_CONTROLLER_2,
>> + MSM_DP_CONTROLLER_3,
>> MSM_DP_CONTROLLER_COUNT,
>> };
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 22:41 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On Wed, 07 Dec 2022 14:00:00 -0800, Bjorn Andersson wrote:
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
> [...]
Applied, thanks!
[01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/9ae2a57bdf9a
[02/12] drm/msm/dpu: Introduce SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/f0a1bdf64dd7
[03/12] drm/msm: Introduce SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/39bcdb416fb6
[04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
https://gitlab.freedesktop.org/lumag/msm/-/commit/b6f8c4debc00
[05/12] drm/msm/dp: Stop using DP id as index in desc
https://gitlab.freedesktop.org/lumag/msm/-/commit/5d417b401146
[06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/5bd69fd16198
[07/12] drm/msm/dp: Add SDM845 DisplayPort instance
https://gitlab.freedesktop.org/lumag/msm/-/commit/fa33f2aa9674
[08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
https://gitlab.freedesktop.org/lumag/msm/-/commit/cd198caddea7
[09/12] drm/msm/dp: Implement hpd_notify()
https://gitlab.freedesktop.org/lumag/msm/-/commit/542b37efc20e
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 22:41 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On Wed, 07 Dec 2022 14:00:00 -0800, Bjorn Andersson wrote:
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
> [...]
Applied, thanks!
[01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/9ae2a57bdf9a
[02/12] drm/msm/dpu: Introduce SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/f0a1bdf64dd7
[03/12] drm/msm: Introduce SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/39bcdb416fb6
[04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
https://gitlab.freedesktop.org/lumag/msm/-/commit/b6f8c4debc00
[05/12] drm/msm/dp: Stop using DP id as index in desc
https://gitlab.freedesktop.org/lumag/msm/-/commit/5d417b401146
[06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/5bd69fd16198
[07/12] drm/msm/dp: Add SDM845 DisplayPort instance
https://gitlab.freedesktop.org/lumag/msm/-/commit/fa33f2aa9674
[08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
https://gitlab.freedesktop.org/lumag/msm/-/commit/cd198caddea7
[09/12] drm/msm/dp: Implement hpd_notify()
https://gitlab.freedesktop.org/lumag/msm/-/commit/542b37efc20e
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 23:43 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On Wed, 07 Dec 2022 14:00:00 -0800, Bjorn Andersson wrote:
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
> [...]
Applied, thanks!
[01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/9ae2a57bdf9a
[02/12] drm/msm/dpu: Introduce SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/f0a1bdf64dd7
[03/12] drm/msm: Introduce SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/39bcdb416fb6
[04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
https://gitlab.freedesktop.org/lumag/msm/-/commit/b6f8c4debc00
[05/12] drm/msm/dp: Stop using DP id as index in desc
https://gitlab.freedesktop.org/lumag/msm/-/commit/5d417b401146
[06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/5bd69fd16198
[07/12] drm/msm/dp: Add SDM845 DisplayPort instance
https://gitlab.freedesktop.org/lumag/msm/-/commit/fa33f2aa9674
[08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
https://gitlab.freedesktop.org/lumag/msm/-/commit/cd198caddea7
[09/12] drm/msm/dp: Implement hpd_notify()
https://gitlab.freedesktop.org/lumag/msm/-/commit/542b37efc20e
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 00/12] drm/msm: Add SC8280XP support
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 23:43 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On Wed, 07 Dec 2022 14:00:00 -0800, Bjorn Andersson wrote:
> This introduces support for the SC8280XP platform in the MDSS, DPU and
> DP driver. It reworks the HDP handling in the DP driver to support
> external HPD sources - such as the dp-connector, or USB Type-C altmode.
>
> It then introduces the display clock controllers, mdss, dpu and
> displayport controllers and link everything together, for both the MDSS
> instances on the platform, and lastly enables EDP on the compute
> reference device and 6 of the MiniDP outputs on the automotive
> development platform.
>
> [...]
Applied, thanks!
[01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/9ae2a57bdf9a
[02/12] drm/msm/dpu: Introduce SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/f0a1bdf64dd7
[03/12] drm/msm: Introduce SC8280XP MDSS
https://gitlab.freedesktop.org/lumag/msm/-/commit/39bcdb416fb6
[04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
https://gitlab.freedesktop.org/lumag/msm/-/commit/b6f8c4debc00
[05/12] drm/msm/dp: Stop using DP id as index in desc
https://gitlab.freedesktop.org/lumag/msm/-/commit/5d417b401146
[06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP
https://gitlab.freedesktop.org/lumag/msm/-/commit/5bd69fd16198
[07/12] drm/msm/dp: Add SDM845 DisplayPort instance
https://gitlab.freedesktop.org/lumag/msm/-/commit/fa33f2aa9674
[08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks
https://gitlab.freedesktop.org/lumag/msm/-/commit/cd198caddea7
[09/12] drm/msm/dp: Implement hpd_notify()
https://gitlab.freedesktop.org/lumag/msm/-/commit/542b37efc20e
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
2022-12-07 22:00 ` Bjorn Andersson
@ 2023-01-18 2:58 ` Dmitry Baryshkov
-1 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-18 2:58 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> 1 file changed, 838 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Limited
> */
>
> +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> @@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
> status = "disabled";
> };
>
> + mdss1_dp0_phy: phy@8909a00 {
> + compatible = "qcom,sc8280xp-dp-phy";
> + reg = <0 0x08909a00 0 0x19c>,
> + <0 0x08909200 0 0xec>,
> + <0 0x08909600 0 0xec>,
> + <0 0x08909000 0 0x1c8>;
> +
> + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> + clock-names = "aux", "cfg_ahb";
> +
> + power-domains = <&rpmhpd SC8280XP_MX>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + mdss1_dp1_phy: phy@890ca00 {
> + compatible = "qcom,sc8280xp-dp-phy";
> + reg = <0 0x0890ca00 0 0x19c>,
> + <0 0x0890c200 0 0xec>,
> + <0 0x0890c600 0 0xec>,
> + <0 0x0890c000 0 0x1c8>;
> +
> + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> + clock-names = "aux", "cfg_ahb";
> +
> + power-domains = <&rpmhpd SC8280XP_MX>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> system-cache-controller@9200000 {
> compatible = "qcom,sc8280xp-llcc";
> reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> @@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
> };
> };
>
> + mdss0: display-subsystem@ae00000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc0 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1000 0x402>;
> +
> + status = "disabled";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss0_mdp: display-controller@ae01000 {
> + compatible = "qcom,sc8280xp-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus",
> + "nrt_bus",
> + "iface",
> + "lut",
> + "core",
> + "vsync";
> +
> + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <460000000>,
> + <19200000>;
> +
> + operating-points-v2 = <&mdss0_mdp_opp_table>;
> + power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> + interrupt-parent = <&mdss0>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@5 {
> + reg = <5>;
> + mdss0_intf5_out: endpoint {
> + remote-endpoint = <&mdss0_dp3_in>;
> + };
> + };
> +
> + port@6 {
> + reg = <6>;
> + mdss0_intf6_out: endpoint {
> + remote-endpoint = <&mdss0_dp2_in>;
> + };
> + };
> + };
This now fails with:
arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
ports: 'port@0' is a required property
From schema:
Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
Unevaluated properties are not allowed ('ports' was unexpected)
From schema:
Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
We do not map reg ids to INTF indices. So, unless you plan to change
that, could you please change these to port@0 / port@1 ?
[skipped the rest]
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
@ 2023-01-18 2:58 ` Dmitry Baryshkov
0 siblings, 0 replies; 68+ messages in thread
From: Dmitry Baryshkov @ 2023-01-18 2:58 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On 08/12/2022 00:00, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v4:
> - None
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> 1 file changed, 838 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Limited
> */
>
> +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> @@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
> status = "disabled";
> };
>
> + mdss1_dp0_phy: phy@8909a00 {
> + compatible = "qcom,sc8280xp-dp-phy";
> + reg = <0 0x08909a00 0 0x19c>,
> + <0 0x08909200 0 0xec>,
> + <0 0x08909600 0 0xec>,
> + <0 0x08909000 0 0x1c8>;
> +
> + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> + clock-names = "aux", "cfg_ahb";
> +
> + power-domains = <&rpmhpd SC8280XP_MX>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + mdss1_dp1_phy: phy@890ca00 {
> + compatible = "qcom,sc8280xp-dp-phy";
> + reg = <0 0x0890ca00 0 0x19c>,
> + <0 0x0890c200 0 0xec>,
> + <0 0x0890c600 0 0xec>,
> + <0 0x0890c000 0 0x1c8>;
> +
> + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> + clock-names = "aux", "cfg_ahb";
> +
> + power-domains = <&rpmhpd SC8280XP_MX>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> system-cache-controller@9200000 {
> compatible = "qcom,sc8280xp-llcc";
> reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> @@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
> };
> };
>
> + mdss0: display-subsystem@ae00000 {
> + compatible = "qcom,sc8280xp-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc0 MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "ahb",
> + "core";
> +
> + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + iommus = <&apps_smmu 0x1000 0x402>;
> +
> + status = "disabled";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss0_mdp: display-controller@ae01000 {
> + compatible = "qcom,sc8280xp-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>,
> + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus",
> + "nrt_bus",
> + "iface",
> + "lut",
> + "core",
> + "vsync";
> +
> + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <460000000>,
> + <19200000>;
> +
> + operating-points-v2 = <&mdss0_mdp_opp_table>;
> + power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> + interrupt-parent = <&mdss0>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@5 {
> + reg = <5>;
> + mdss0_intf5_out: endpoint {
> + remote-endpoint = <&mdss0_dp3_in>;
> + };
> + };
> +
> + port@6 {
> + reg = <6>;
> + mdss0_intf6_out: endpoint {
> + remote-endpoint = <&mdss0_dp2_in>;
> + };
> + };
> + };
This now fails with:
arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
ports: 'port@0' is a required property
From schema:
Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
Unevaluated properties are not allowed ('ports' was unexpected)
From schema:
Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
We do not map reg ids to INTF indices. So, unless you plan to change
that, could you please change these to port@0 / port@1 ?
[skipped the rest]
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
2023-01-18 2:58 ` Dmitry Baryshkov
@ 2023-01-19 18:12 ` Bjorn Andersson
-1 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2023-01-19 18:12 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio,
Kalyan Thota, Jessica Zhang, Kuogee Hsieh, Johan Hovold,
Sankeerth Billakanti, linux-arm-msm, dri-devel, freedreno,
devicetree, linux-kernel
On Wed, Jan 18, 2023 at 04:58:26AM +0200, Dmitry Baryshkov wrote:
> On 08/12/2022 00:00, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >
> > Define the display clock controllers, the MDSS instances, the DP phys
> > and connect these together.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >
> > Changes since v4:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> > 1 file changed, 838 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index 9f3132ac2857..c2f186495506 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -4,6 +4,7 @@
> > * Copyright (c) 2022, Linaro Limited
> > */
> > +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,rpmh.h>
> > #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> > @@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
> > status = "disabled";
> > };
> > + mdss1_dp0_phy: phy@8909a00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x08909a00 0 0x19c>,
> > + <0 0x08909200 0 0xec>,
> > + <0 0x08909600 0 0xec>,
> > + <0 0x08909000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + mdss1_dp1_phy: phy@890ca00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x0890ca00 0 0x19c>,
> > + <0 0x0890c200 0 0xec>,
> > + <0 0x0890c600 0 0xec>,
> > + <0 0x0890c000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > system-cache-controller@9200000 {
> > compatible = "qcom,sc8280xp-llcc";
> > reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> > @@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
> > };
> > };
> > + mdss0: display-subsystem@ae00000 {
> > + compatible = "qcom,sc8280xp-mdss";
> > + reg = <0 0x0ae00000 0 0x1000>;
> > + reg-names = "mdss";
> > +
> > + power-domains = <&dispcc0 MDSS_GDSC>;
> > +
> > + clocks = <&gcc GCC_DISP_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> > + clock-names = "iface",
> > + "ahb",
> > + "core";
> > +
> > + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> > +
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + iommus = <&apps_smmu 0x1000 0x402>;
> > +
> > + status = "disabled";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mdss0_mdp: display-controller@ae01000 {
> > + compatible = "qcom,sc8280xp-dpu";
> > + reg = <0 0x0ae01000 0 0x8f000>,
> > + <0 0x0aeb0000 0 0x2008>;
> > + reg-names = "mdp", "vbif";
> > +
> > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + clock-names = "bus",
> > + "nrt_bus",
> > + "iface",
> > + "lut",
> > + "core",
> > + "vsync";
> > +
> > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + assigned-clock-rates = <460000000>,
> > + <19200000>;
> > +
> > + operating-points-v2 = <&mdss0_mdp_opp_table>;
> > + power-domains = <&rpmhpd SC8280XP_MMCX>;
> > +
> > + interrupt-parent = <&mdss0>;
> > + interrupts = <0>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@5 {
> > + reg = <5>;
> > + mdss0_intf5_out: endpoint {
> > + remote-endpoint = <&mdss0_dp3_in>;
> > + };
> > + };
> > +
> > + port@6 {
> > + reg = <6>;
> > + mdss0_intf6_out: endpoint {
> > + remote-endpoint = <&mdss0_dp2_in>;
> > + };
> > + };
> > + };
>
> This now fails with:
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> ports: 'port@0' is a required property
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> Unevaluated properties are not allowed ('ports' was unexpected)
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
>
> We do not map reg ids to INTF indices. So, unless you plan to change that,
> could you please change these to port@0 / port@1 ?
>
Too bad, I liked the fact that I gave these numbers any form of meaning.
I guess we can change it to just be an arbitrary index, and keep the
intf-information in the label...
Regards,
Bjorn
> [skipped the rest]
>
> --
> With best wishes
> Dmitry
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks
@ 2023-01-19 18:12 ` Bjorn Andersson
0 siblings, 0 replies; 68+ messages in thread
From: Bjorn Andersson @ 2023-01-19 18:12 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Kalyan Thota, freedreno, Sankeerth Billakanti, linux-kernel,
Krzysztof Kozlowski, devicetree, Sean Paul, Bjorn Andersson,
Abhinav Kumar, dri-devel, Kuogee Hsieh, Konrad Dybcio,
Rob Herring, linux-arm-msm, Jessica Zhang, Johan Hovold
On Wed, Jan 18, 2023 at 04:58:26AM +0200, Dmitry Baryshkov wrote:
> On 08/12/2022 00:00, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >
> > Define the display clock controllers, the MDSS instances, the DP phys
> > and connect these together.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >
> > Changes since v4:
> > - None
> >
> > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
> > 1 file changed, 838 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index 9f3132ac2857..c2f186495506 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -4,6 +4,7 @@
> > * Copyright (c) 2022, Linaro Limited
> > */
> > +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> > #include <dt-bindings/clock/qcom,rpmh.h>
> > #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> > @@ -1698,6 +1699,44 @@ usb_1_qmpphy: phy@8903000 {
> > status = "disabled";
> > };
> > + mdss1_dp0_phy: phy@8909a00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x08909a00 0 0x19c>,
> > + <0 0x08909200 0 0xec>,
> > + <0 0x08909600 0 0xec>,
> > + <0 0x08909000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + mdss1_dp1_phy: phy@890ca00 {
> > + compatible = "qcom,sc8280xp-dp-phy";
> > + reg = <0 0x0890ca00 0 0x19c>,
> > + <0 0x0890c200 0 0xec>,
> > + <0 0x0890c600 0 0xec>,
> > + <0 0x0890c000 0 0x1c8>;
> > +
> > + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> > + <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + power-domains = <&rpmhpd SC8280XP_MX>;
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > system-cache-controller@9200000 {
> > compatible = "qcom,sc8280xp-llcc";
> > reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> > @@ -1813,6 +1852,326 @@ usb_1_dwc3: usb@a800000 {
> > };
> > };
> > + mdss0: display-subsystem@ae00000 {
> > + compatible = "qcom,sc8280xp-mdss";
> > + reg = <0 0x0ae00000 0 0x1000>;
> > + reg-names = "mdss";
> > +
> > + power-domains = <&dispcc0 MDSS_GDSC>;
> > +
> > + clocks = <&gcc GCC_DISP_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> > + clock-names = "iface",
> > + "ahb",
> > + "core";
> > +
> > + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> > +
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + iommus = <&apps_smmu 0x1000 0x402>;
> > +
> > + status = "disabled";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mdss0_mdp: display-controller@ae01000 {
> > + compatible = "qcom,sc8280xp-dpu";
> > + reg = <0 0x0ae01000 0 0x8f000>,
> > + <0 0x0aeb0000 0 0x2008>;
> > + reg-names = "mdp", "vbif";
> > +
> > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + clock-names = "bus",
> > + "nrt_bus",
> > + "iface",
> > + "lut",
> > + "core",
> > + "vsync";
> > +
> > + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> > + assigned-clock-rates = <460000000>,
> > + <19200000>;
> > +
> > + operating-points-v2 = <&mdss0_mdp_opp_table>;
> > + power-domains = <&rpmhpd SC8280XP_MMCX>;
> > +
> > + interrupt-parent = <&mdss0>;
> > + interrupts = <0>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@5 {
> > + reg = <5>;
> > + mdss0_intf5_out: endpoint {
> > + remote-endpoint = <&mdss0_dp3_in>;
> > + };
> > + };
> > +
> > + port@6 {
> > + reg = <6>;
> > + mdss0_intf6_out: endpoint {
> > + remote-endpoint = <&mdss0_dp2_in>;
> > + };
> > + };
> > + };
>
> This now fails with:
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> ports: 'port@0' is a required property
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: display-controller@ae01000:
> Unevaluated properties are not allowed ('ports' was unexpected)
> From schema:
> Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
>
> We do not map reg ids to INTF indices. So, unless you plan to change that,
> could you please change these to port@0 / port@1 ?
>
Too bad, I liked the fact that I gave these numbers any form of meaning.
I guess we can change it to just be an arbitrary index, and keep the
intf-information in the label...
Regards,
Bjorn
> [skipped the rest]
>
> --
> With best wishes
> Dmitry
>
^ permalink raw reply [flat|nested] 68+ messages in thread
end of thread, other threads:[~2023-01-19 18:12 UTC | newest]
Thread overview: 68+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-07 22:00 [PATCH v5 00/12] drm/msm: Add SC8280XP support Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-07 22:00 ` [PATCH v5 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-07 22:00 ` [PATCH v5 02/12] drm/msm/dpu: Introduce SC8280XP Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-07 23:30 ` Dmitry Baryshkov
2022-12-07 23:30 ` Dmitry Baryshkov
2022-12-08 23:31 ` Kuogee Hsieh
2022-12-08 23:31 ` Kuogee Hsieh
2023-01-08 21:47 ` Dmitry Baryshkov
2023-01-08 21:47 ` Dmitry Baryshkov
2022-12-07 22:00 ` [PATCH v5 03/12] drm/msm: Introduce SC8280XP MDSS Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:32 ` Kuogee Hsieh
2022-12-08 23:32 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 04/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:15 ` Dmitry Baryshkov
2022-12-08 23:15 ` Dmitry Baryshkov
2022-12-07 22:00 ` [PATCH v5 05/12] drm/msm/dp: Stop using DP id as index in desc Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:12 ` Kuogee Hsieh
2022-12-08 23:12 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 06/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:13 ` Kuogee Hsieh
2022-12-08 23:13 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 07/12] drm/msm/dp: Add SDM845 DisplayPort instance Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:14 ` Kuogee Hsieh
2022-12-08 23:14 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 08/12] drm/msm/dp: Rely on hpd_enable/disable callbacks Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:14 ` Kuogee Hsieh
2022-12-08 23:14 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 09/12] drm/msm/dp: Implement hpd_notify() Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-08 23:15 ` Kuogee Hsieh
2022-12-08 23:15 ` Kuogee Hsieh
2022-12-07 22:00 ` [PATCH v5 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-09 10:52 ` Johan Hovold
2022-12-09 10:52 ` Johan Hovold
2023-01-18 2:58 ` Dmitry Baryshkov
2023-01-18 2:58 ` Dmitry Baryshkov
2023-01-19 18:12 ` Bjorn Andersson
2023-01-19 18:12 ` Bjorn Andersson
2022-12-07 22:00 ` [PATCH v5 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-09 10:35 ` Johan Hovold
2022-12-09 10:35 ` Johan Hovold
2022-12-13 15:10 ` Bjorn Andersson
2022-12-13 15:10 ` Bjorn Andersson
2022-12-13 16:26 ` Johan Hovold
2022-12-13 16:26 ` Johan Hovold
2022-12-09 11:30 ` Dmitry Baryshkov
2022-12-09 11:30 ` Dmitry Baryshkov
2022-12-07 22:00 ` [PATCH v5 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances Bjorn Andersson
2022-12-07 22:00 ` Bjorn Andersson
2022-12-09 10:44 ` Johan Hovold
2022-12-09 10:44 ` Johan Hovold
2022-12-09 2:49 ` [PATCH v5 00/12] drm/msm: Add SC8280XP support Steev Klimaszewski
2022-12-09 2:49 ` Steev Klimaszewski
2023-01-09 22:41 ` Dmitry Baryshkov
2023-01-09 23:43 ` Dmitry Baryshkov
2023-01-09 23:43 ` Dmitry Baryshkov
2023-01-09 22:41 ` Dmitry Baryshkov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.