* [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board
@ 2023-02-06 14:56 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:56 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Add A660 device to the Qualcomm SM8350 platform and enable it for the
sm8350-hdk board. Unfortunately while adding the GPU & related devices I
noticed that DT nodes on SM8350 are greatly out of the preagreed order,
so patches 4-6 reorder DT nodes to follow the agreement.
Changes since v1:
- Fixed the subject and commit message for patch 1
- Fixed GMU's clocks to follow the vendor kernel
- Marked Adreno SMMU as dma-coherent
- Dropped comments targeting sm8350 v1, we do not support that chip
revision.
Dmitry Baryshkov (8):
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
dt-bindings: display/msm/gmu: add Adreno 660 support
arm64: dts: qcom: sm8350: reorder device nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350-hdk: enable GPU
.../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -
.../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
.../devicetree/bindings/display/msm/gmu.yaml | 1 +
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 +
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2512 +++++++++--------
include/dt-bindings/power/qcom-rpmpd.h | 1 +
6 files changed, 1357 insertions(+), 1238 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
--
2.39.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board
@ 2023-02-06 14:56 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:56 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Add A660 device to the Qualcomm SM8350 platform and enable it for the
sm8350-hdk board. Unfortunately while adding the GPU & related devices I
noticed that DT nodes on SM8350 are greatly out of the preagreed order,
so patches 4-6 reorder DT nodes to follow the agreement.
Changes since v1:
- Fixed the subject and commit message for patch 1
- Fixed GMU's clocks to follow the vendor kernel
- Marked Adreno SMMU as dma-coherent
- Dropped comments targeting sm8350 v1, we do not support that chip
revision.
Dmitry Baryshkov (8):
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
dt-bindings: display/msm/gmu: add Adreno 660 support
arm64: dts: qcom: sm8350: reorder device nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350-hdk: enable GPU
.../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -
.../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
.../devicetree/bindings/display/msm/gmu.yaml | 1 +
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 +
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2512 +++++++++--------
include/dt-bindings/power/qcom-rpmpd.h | 1 +
6 files changed, 1357 insertions(+), 1238 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
--
2.39.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
The GPU clock controller bindings for the Qualcomm sm8350 platform are
not correct. The driver uses .fw_name instead of using indices to bind
parent clocks, thus demanding the clock-names usage. With the proper
clock-names in place, the bindings becomes equal to the bindings defined
by qcom,gpucc.yaml, so it is impractical to keep them in a separate
file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -------------------
.../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
2 files changed, 2 insertions(+), 71 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
deleted file mode 100644
index fb7ae3d18503..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller on SM8350
-
-maintainers:
- - Robert Foss <robert.foss@linaro.org>
-
-description: |
- Qualcomm graphics clock control module provides the clocks, resets and power
- domains on Qualcomm SoCs.
-
- See also:: include/dt-bindings/clock/qcom,gpucc-sm8350.h
-
-properties:
- compatible:
- enum:
- - qcom,sm8350-gpucc
-
- clocks:
- items:
- - description: Board XO source
- - description: GPLL0 main branch source
- - description: GPLL0 div branch source
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
- - clocks
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,gcc-sm8350.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- clock-controller@3d90000 {
- compatible = "qcom,sm8350-gpucc";
- reg = <0 0x03d90000 0 0x9000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 7256c438a4cf..db53eb288995 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -21,6 +21,7 @@ description: |
include/dt-bindings/clock/qcom,gpucc-sm6350.h
include/dt-bindings/clock/qcom,gpucc-sm8150.h
include/dt-bindings/clock/qcom,gpucc-sm8250.h
+ include/dt-bindings/clock/qcom,gpucc-sm8350.h
properties:
compatible:
@@ -33,6 +34,7 @@ properties:
- qcom,sm6350-gpucc
- qcom,sm8150-gpucc
- qcom,sm8250-gpucc
+ - qcom,sm8350-gpucc
clocks:
items:
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 1/8] dt-bindings: clock: Merge qcom, gpucc-sm8350 into qcom, gpucc.yaml
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
The GPU clock controller bindings for the Qualcomm sm8350 platform are
not correct. The driver uses .fw_name instead of using indices to bind
parent clocks, thus demanding the clock-names usage. With the proper
clock-names in place, the bindings becomes equal to the bindings defined
by qcom,gpucc.yaml, so it is impractical to keep them in a separate
file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -------------------
.../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
2 files changed, 2 insertions(+), 71 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
deleted file mode 100644
index fb7ae3d18503..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller on SM8350
-
-maintainers:
- - Robert Foss <robert.foss@linaro.org>
-
-description: |
- Qualcomm graphics clock control module provides the clocks, resets and power
- domains on Qualcomm SoCs.
-
- See also:: include/dt-bindings/clock/qcom,gpucc-sm8350.h
-
-properties:
- compatible:
- enum:
- - qcom,sm8350-gpucc
-
- clocks:
- items:
- - description: Board XO source
- - description: GPLL0 main branch source
- - description: GPLL0 div branch source
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
- - clocks
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,gcc-sm8350.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- clock-controller@3d90000 {
- compatible = "qcom,sm8350-gpucc";
- reg = <0 0x03d90000 0 0x9000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 7256c438a4cf..db53eb288995 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -21,6 +21,7 @@ description: |
include/dt-bindings/clock/qcom,gpucc-sm6350.h
include/dt-bindings/clock/qcom,gpucc-sm8150.h
include/dt-bindings/clock/qcom,gpucc-sm8250.h
+ include/dt-bindings/clock/qcom,gpucc-sm8350.h
properties:
compatible:
@@ -33,6 +34,7 @@ properties:
- qcom,sm6350-gpucc
- qcom,sm8150-gpucc
- qcom,sm8250-gpucc
+ - qcom,sm8350-gpucc
clocks:
items:
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Add define for another power saving state used on SM8350 for the GPU.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
include/dt-bindings/power/qcom-rpmpd.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 4a30d10e6b7d..1bf8e87ecd7e 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -211,6 +211,7 @@
#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
#define RPMH_REGULATOR_LEVEL_LOW_SVS 64
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
#define RPMH_REGULATOR_LEVEL_SVS 128
#define RPMH_REGULATOR_LEVEL_SVS_L0 144
#define RPMH_REGULATOR_LEVEL_SVS_L1 192
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 2/8] dt-bindings: power: qcom, rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Add define for another power saving state used on SM8350 for the GPU.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
include/dt-bindings/power/qcom-rpmpd.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 4a30d10e6b7d..1bf8e87ecd7e 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -211,6 +211,7 @@
#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
#define RPMH_REGULATOR_LEVEL_LOW_SVS 64
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
#define RPMH_REGULATOR_LEVEL_SVS 128
#define RPMH_REGULATOR_LEVEL_SVS_L0 144
#define RPMH_REGULATOR_LEVEL_SVS_L1 192
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Add Adreno A660 to the A635 clause to define all version-specific
properties. There is no need to add it to the top-level clause, since
top-level compatible uses pattern to define compatible strings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Documentation/devicetree/bindings/display/msm/gmu.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index ab14e81cb050..d5ce0dff4220 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -122,6 +122,7 @@ allOf:
contains:
enum:
- qcom,adreno-gmu-635.0
+ - qcom,adreno-gmu-660.1
then:
properties:
reg:
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Add Adreno A660 to the A635 clause to define all version-specific
properties. There is no need to add it to the top-level clause, since
top-level compatible uses pattern to define compatible strings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Documentation/devicetree/bindings/display/msm/gmu.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index ab14e81cb050..d5ce0dff4220 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -122,6 +122,7 @@ allOf:
contains:
enum:
- qcom,adreno-gmu-635.0
+ - qcom,adreno-gmu-660.1
then:
properties:
reg:
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
position at the end of /soc/.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
1 file changed, 614 insertions(+), 614 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0de42a333d32..061aa3fec1c4 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
};
};
- apps_smmu: iommu@15000000 {
- compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
- reg = <0 0x15000000 0 0x100000>;
- #iommu-cells = <2>;
- #global-interrupts = <2>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
- };
-
config_noc: interconnect@1500000 {
compatible = "qcom,sm8350-config-noc";
reg = <0 0x01500000 0 0xa580>;
@@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
clock-names = "core";
};
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0 0x20000>;
- reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
- <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
- timer@17c20000 {
- compatible = "arm,armv7-timer-mem";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- reg = <0x0 0x17c20000 0x0 0x1000>;
- clock-frequency = <19200000>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
- frame@17c21000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c21000 0x1000>,
- <0x17c22000 0x1000>;
- };
+ iommus = <&apps_smmu 0xe0 0x0>;
- frame@17c23000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c23000 0x1000>;
- status = "disabled";
- };
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
- frame@17c25000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c25000 0x1000>;
- status = "disabled";
- };
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
- frame@17c27000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c27000 0x1000>;
- status = "disabled";
- };
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
- frame@17c29000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c29000 0x1000>;
- status = "disabled";
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x188>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x188>,
+ <0 0x01d87a00 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
};
+ };
- frame@17c2b000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c2b000 0x1000>;
- status = "disabled";
- };
+ slpi: remoteproc@5c00000 {
+ compatible = "qcom,sm8350-slpi-pas";
+ reg = <0 0x05c00000 0 0x4000>;
- frame@17c2d000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c2d000 0x1000>;
- status = "disabled";
- };
- };
+ interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
- apps_rsc: rsc@18200000 {
- label = "apps_rsc";
- compatible = "qcom,rpmh-rsc";
- reg = <0x0 0x18200000 0x0 0x10000>,
- <0x0 0x18210000 0x0 0x10000>,
- <0x0 0x18220000 0x0 0x10000>;
- reg-names = "drv-0", "drv-1", "drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- qcom,tcs-offset = <0xd00>;
- qcom,drv-id = <2>;
- qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
- <WAKE_TCS 3>, <CONTROL_TCS 0>;
- power-domains = <&CLUSTER_PD>;
-
- rpmhcc: clock-controller {
- compatible = "qcom,sm8350-rpmh-clk";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board>;
- };
-
- rpmhpd: power-controller {
- compatible = "qcom,sm8350-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp1 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp5 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp8 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
-
- apps_bcm_voter: bcm-voter {
- compatible = "qcom,bcm-voter";
- };
- };
-
- cpufreq_hw: cpufreq@18591000 {
- compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
- reg = <0 0x18591000 0 0x1000>,
- <0 0x18592000 0 0x1000>,
- <0 0x18593000 0 0x1000>;
- reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
- clock-names = "xo", "alternate";
-
- #freq-domain-cells = <1>;
- };
-
- ufs_mem_hc: ufshc@1d84000 {
- compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x3000>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
- phy-names = "ufsphy";
- lanes-per-direction = <2>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
-
- power-domains = <&gcc UFS_PHY_GDSC>;
-
- iommus = <&apps_smmu 0xe0 0x0>;
-
- clock-names =
- "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
- clocks =
- <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sm8350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
-
- slpi: remoteproc@5c00000 {
- compatible = "qcom,sm8350-slpi-pas";
- reg = <0 0x05c00000 0 0x4000>;
-
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
power-domains = <&rpmhpd SM8350_LCX>,
<&rpmhpd SM8350_LMX>;
@@ -2427,176 +2161,67 @@ compute-cb@3 {
};
};
- cdsp: remoteproc@98900000 {
- compatible = "qcom,sm8350-cdsp-pas";
- reg = <0 0x98900000 0 0x1400000>;
-
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
+ sdhc_2: mmc@8804000 {
+ compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
- power-domains = <&rpmhpd SM8350_CX>,
- <&rpmhpd SM8350_MXC>;
- power-domain-names = "cx", "mxc";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC2_BCR>;
+ interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
+ iommus = <&apps_smmu 0x4a0 0x0>;
+ power-domains = <&rpmhpd SM8350_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+ bus-width = <4>;
+ dma-coherent;
- interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+ status = "disabled";
- memory-region = <&pil_cdsp_mem>;
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
- qcom,qmp = <&aoss_qmp>;
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
- qcom,smem-states = <&smp2p_cdsp_out 0>;
- qcom,smem-state-names = "stop";
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8350-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e3000 0 0x400>;
status = "disabled";
+ #phy-cells = <0>;
- glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_CDSP
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
- label = "cdsp";
- qcom,remote-pid = <5>;
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ };
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "cdsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
+ usb_2_hsphy: phy@88e4000 {
+ compatible = "qcom,sm8250-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
- compute-cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- iommus = <&apps_smmu 0x2161 0x0400>,
- <&apps_smmu 0x1181 0x0420>;
- };
-
- compute-cb@2 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
- iommus = <&apps_smmu 0x2162 0x0400>,
- <&apps_smmu 0x1182 0x0420>;
- };
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x2163 0x0400>,
- <&apps_smmu 0x1183 0x0420>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x2164 0x0400>,
- <&apps_smmu 0x1184 0x0420>;
- };
-
- compute-cb@5 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
- iommus = <&apps_smmu 0x2165 0x0400>,
- <&apps_smmu 0x1185 0x0420>;
- };
-
- compute-cb@6 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <6>;
- iommus = <&apps_smmu 0x2166 0x0400>,
- <&apps_smmu 0x1186 0x0420>;
- };
-
- compute-cb@7 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <7>;
- iommus = <&apps_smmu 0x2167 0x0400>,
- <&apps_smmu 0x1187 0x0420>;
- };
-
- compute-cb@8 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <8>;
- iommus = <&apps_smmu 0x2168 0x0400>,
- <&apps_smmu 0x1188 0x0420>;
- };
-
- /* note: secure cb9 in downstream */
- };
- };
- };
-
- sdhc_2: mmc@8804000 {
- compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
- reg = <0 0x08804000 0 0x1000>;
-
- interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "core", "xo";
- resets = <&gcc GCC_SDCC2_BCR>;
- interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
- interconnect-names = "sdhc-ddr","cpu-sdhc";
- iommus = <&apps_smmu 0x4a0 0x0>;
- power-domains = <&rpmhpd SM8350_CX>;
- operating-points-v2 = <&sdhc2_opp_table>;
- bus-width = <4>;
- dma-coherent;
-
- status = "disabled";
-
- sdhc2_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-202000000 {
- opp-hz = /bits/ 64 <202000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
- };
-
- usb_1_hsphy: phy@88e3000 {
- compatible = "qcom,sm8350-usb-hs-phy",
- "qcom,usb-snps-hs-7nm-phy";
- reg = <0 0x088e3000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- };
-
- usb_2_hsphy: phy@88e4000 {
- compatible = "qcom,sm8250-usb-hs-phy",
- "qcom,usb-snps-hs-7nm-phy";
- reg = <0 0x088e4000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ref";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
@@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
status = "disabled";
};
- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-187500000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ adsp: remoteproc@17300000 {
+ compatible = "qcom,sm8350-adsp-pas";
+ reg = <0 0x17300000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x20000>;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c23000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c25000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c27000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c29000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2b000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2d000 0x1000>;
+ status = "disabled";
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <5>;
+ apps_rsc: rsc@18200000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8350-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ rpmhpd: power-controller {
+ compatible = "qcom,sm8350-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
- operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
- phys = <&mdss_dsi1_phy>;
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
- status = "disabled";
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
- dsi1_opp_table: opp-table {
- compatible = "operating-points-v2";
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
- /* TODO: opp-187500000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-187500000 {
- opp-hz = /bits/ 64 <187500000>;
- required-opps = <&rpmhpd_opp_svs>;
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
- };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
};
};
- dispcc: clock-controller@af00000 {
- compatible = "qcom,sm8350-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
- <0>,
- <0>;
- clock-names = "bi_tcxo",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_phy_pll_link_clk",
- "dp_phy_pll_vco_div_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
- power-domains = <&rpmhpd SM8350_MMCX>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
};
- adsp: remoteproc@17300000 {
- compatible = "qcom,sm8350-adsp-pas";
- reg = <0 0x17300000 0 0x100>;
+ cdsp: remoteproc@98900000 {
+ compatible = "qcom,sm8350-cdsp-pas";
+ reg = <0 0x98900000 0 0x1400000>;
- interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
- power-domain-names = "lcx", "lmx";
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MXC>;
+ power-domain-names = "cx", "mxc";
- memory-region = <&pil_adsp_mem>;
+ interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp_mem>;
qcom,qmp = <&aoss_qmp>;
- qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_LPASS
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
- label = "lpass";
- qcom,remote-pid = <2>;
+ label = "cdsp";
+ qcom,remote-pid = <5>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "adsp";
+ label = "cdsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2161 0x0400>,
+ <&apps_smmu 0x1181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2162 0x0400>,
+ <&apps_smmu 0x1182 0x0420>;
+ };
+
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
- iommus = <&apps_smmu 0x1803 0x0>;
+ iommus = <&apps_smmu 0x2163 0x0400>,
+ <&apps_smmu 0x1183 0x0420>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
- iommus = <&apps_smmu 0x1804 0x0>;
+ iommus = <&apps_smmu 0x2164 0x0400>,
+ <&apps_smmu 0x1184 0x0420>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
- iommus = <&apps_smmu 0x1805 0x0>;
+ iommus = <&apps_smmu 0x2165 0x0400>,
+ <&apps_smmu 0x1185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2166 0x0400>,
+ <&apps_smmu 0x1186 0x0420>;
};
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2167 0x0400>,
+ <&apps_smmu 0x1187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2168 0x0400>,
+ <&apps_smmu 0x1188 0x0420>;
+ };
+
+ /* note: secure cb9 in downstream */
};
};
};
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
position at the end of /soc/.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
1 file changed, 614 insertions(+), 614 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0de42a333d32..061aa3fec1c4 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
};
};
- apps_smmu: iommu@15000000 {
- compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
- reg = <0 0x15000000 0 0x100000>;
- #iommu-cells = <2>;
- #global-interrupts = <2>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
- };
-
config_noc: interconnect@1500000 {
compatible = "qcom,sm8350-config-noc";
reg = <0 0x01500000 0 0xa580>;
@@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
clock-names = "core";
};
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0 0x20000>;
- reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
- <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
- timer@17c20000 {
- compatible = "arm,armv7-timer-mem";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- reg = <0x0 0x17c20000 0x0 0x1000>;
- clock-frequency = <19200000>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
- frame@17c21000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c21000 0x1000>,
- <0x17c22000 0x1000>;
- };
+ iommus = <&apps_smmu 0xe0 0x0>;
- frame@17c23000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c23000 0x1000>;
- status = "disabled";
- };
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
- frame@17c25000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c25000 0x1000>;
- status = "disabled";
- };
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
- frame@17c27000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c27000 0x1000>;
- status = "disabled";
- };
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
- frame@17c29000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c29000 0x1000>;
- status = "disabled";
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x188>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x188>,
+ <0 0x01d87a00 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
};
+ };
- frame@17c2b000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c2b000 0x1000>;
- status = "disabled";
- };
+ slpi: remoteproc@5c00000 {
+ compatible = "qcom,sm8350-slpi-pas";
+ reg = <0 0x05c00000 0 0x4000>;
- frame@17c2d000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c2d000 0x1000>;
- status = "disabled";
- };
- };
+ interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
- apps_rsc: rsc@18200000 {
- label = "apps_rsc";
- compatible = "qcom,rpmh-rsc";
- reg = <0x0 0x18200000 0x0 0x10000>,
- <0x0 0x18210000 0x0 0x10000>,
- <0x0 0x18220000 0x0 0x10000>;
- reg-names = "drv-0", "drv-1", "drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- qcom,tcs-offset = <0xd00>;
- qcom,drv-id = <2>;
- qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
- <WAKE_TCS 3>, <CONTROL_TCS 0>;
- power-domains = <&CLUSTER_PD>;
-
- rpmhcc: clock-controller {
- compatible = "qcom,sm8350-rpmh-clk";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board>;
- };
-
- rpmhpd: power-controller {
- compatible = "qcom,sm8350-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp1 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp5 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp8 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
-
- apps_bcm_voter: bcm-voter {
- compatible = "qcom,bcm-voter";
- };
- };
-
- cpufreq_hw: cpufreq@18591000 {
- compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
- reg = <0 0x18591000 0 0x1000>,
- <0 0x18592000 0 0x1000>,
- <0 0x18593000 0 0x1000>;
- reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
- clock-names = "xo", "alternate";
-
- #freq-domain-cells = <1>;
- };
-
- ufs_mem_hc: ufshc@1d84000 {
- compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x3000>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
- phy-names = "ufsphy";
- lanes-per-direction = <2>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
-
- power-domains = <&gcc UFS_PHY_GDSC>;
-
- iommus = <&apps_smmu 0xe0 0x0>;
-
- clock-names =
- "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
- clocks =
- <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sm8350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
-
- slpi: remoteproc@5c00000 {
- compatible = "qcom,sm8350-slpi-pas";
- reg = <0 0x05c00000 0 0x4000>;
-
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
power-domains = <&rpmhpd SM8350_LCX>,
<&rpmhpd SM8350_LMX>;
@@ -2427,176 +2161,67 @@ compute-cb@3 {
};
};
- cdsp: remoteproc@98900000 {
- compatible = "qcom,sm8350-cdsp-pas";
- reg = <0 0x98900000 0 0x1400000>;
-
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
+ sdhc_2: mmc@8804000 {
+ compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
- power-domains = <&rpmhpd SM8350_CX>,
- <&rpmhpd SM8350_MXC>;
- power-domain-names = "cx", "mxc";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC2_BCR>;
+ interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
+ iommus = <&apps_smmu 0x4a0 0x0>;
+ power-domains = <&rpmhpd SM8350_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+ bus-width = <4>;
+ dma-coherent;
- interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+ status = "disabled";
- memory-region = <&pil_cdsp_mem>;
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
- qcom,qmp = <&aoss_qmp>;
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
- qcom,smem-states = <&smp2p_cdsp_out 0>;
- qcom,smem-state-names = "stop";
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8350-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e3000 0 0x400>;
status = "disabled";
+ #phy-cells = <0>;
- glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_CDSP
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
- label = "cdsp";
- qcom,remote-pid = <5>;
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ };
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "cdsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
+ usb_2_hsphy: phy@88e4000 {
+ compatible = "qcom,sm8250-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
- compute-cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- iommus = <&apps_smmu 0x2161 0x0400>,
- <&apps_smmu 0x1181 0x0420>;
- };
-
- compute-cb@2 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
- iommus = <&apps_smmu 0x2162 0x0400>,
- <&apps_smmu 0x1182 0x0420>;
- };
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x2163 0x0400>,
- <&apps_smmu 0x1183 0x0420>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x2164 0x0400>,
- <&apps_smmu 0x1184 0x0420>;
- };
-
- compute-cb@5 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
- iommus = <&apps_smmu 0x2165 0x0400>,
- <&apps_smmu 0x1185 0x0420>;
- };
-
- compute-cb@6 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <6>;
- iommus = <&apps_smmu 0x2166 0x0400>,
- <&apps_smmu 0x1186 0x0420>;
- };
-
- compute-cb@7 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <7>;
- iommus = <&apps_smmu 0x2167 0x0400>,
- <&apps_smmu 0x1187 0x0420>;
- };
-
- compute-cb@8 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <8>;
- iommus = <&apps_smmu 0x2168 0x0400>,
- <&apps_smmu 0x1188 0x0420>;
- };
-
- /* note: secure cb9 in downstream */
- };
- };
- };
-
- sdhc_2: mmc@8804000 {
- compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
- reg = <0 0x08804000 0 0x1000>;
-
- interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "core", "xo";
- resets = <&gcc GCC_SDCC2_BCR>;
- interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
- interconnect-names = "sdhc-ddr","cpu-sdhc";
- iommus = <&apps_smmu 0x4a0 0x0>;
- power-domains = <&rpmhpd SM8350_CX>;
- operating-points-v2 = <&sdhc2_opp_table>;
- bus-width = <4>;
- dma-coherent;
-
- status = "disabled";
-
- sdhc2_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-202000000 {
- opp-hz = /bits/ 64 <202000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
- };
-
- usb_1_hsphy: phy@88e3000 {
- compatible = "qcom,sm8350-usb-hs-phy",
- "qcom,usb-snps-hs-7nm-phy";
- reg = <0 0x088e3000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- };
-
- usb_2_hsphy: phy@88e4000 {
- compatible = "qcom,sm8250-usb-hs-phy",
- "qcom,usb-snps-hs-7nm-phy";
- reg = <0 0x088e4000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ref";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
@@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
status = "disabled";
};
- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-187500000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ adsp: remoteproc@17300000 {
+ compatible = "qcom,sm8350-adsp-pas";
+ reg = <0 0x17300000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x20000>;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c23000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c25000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c27000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c29000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2b000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17c2d000 0x1000>;
+ status = "disabled";
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <5>;
+ apps_rsc: rsc@18200000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8350-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ rpmhpd: power-controller {
+ compatible = "qcom,sm8350-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
- operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
- phys = <&mdss_dsi1_phy>;
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
- status = "disabled";
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
- dsi1_opp_table: opp-table {
- compatible = "operating-points-v2";
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
- /* TODO: opp-187500000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-187500000 {
- opp-hz = /bits/ 64 <187500000>;
- required-opps = <&rpmhpd_opp_svs>;
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
- };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
};
};
- dispcc: clock-controller@af00000 {
- compatible = "qcom,sm8350-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
- <0>,
- <0>;
- clock-names = "bi_tcxo",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_phy_pll_link_clk",
- "dp_phy_pll_vco_div_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
- power-domains = <&rpmhpd SM8350_MMCX>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
};
- adsp: remoteproc@17300000 {
- compatible = "qcom,sm8350-adsp-pas";
- reg = <0 0x17300000 0 0x100>;
+ cdsp: remoteproc@98900000 {
+ compatible = "qcom,sm8350-cdsp-pas";
+ reg = <0 0x98900000 0 0x1400000>;
- interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
- power-domain-names = "lcx", "lmx";
+ power-domains = <&rpmhpd SM8350_CX>,
+ <&rpmhpd SM8350_MXC>;
+ power-domain-names = "cx", "mxc";
- memory-region = <&pil_adsp_mem>;
+ interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp_mem>;
qcom,qmp = <&aoss_qmp>;
- qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_LPASS
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
- label = "lpass";
- qcom,remote-pid = <2>;
+ label = "cdsp";
+ qcom,remote-pid = <5>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "adsp";
+ label = "cdsp";
qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2161 0x0400>,
+ <&apps_smmu 0x1181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2162 0x0400>,
+ <&apps_smmu 0x1182 0x0420>;
+ };
+
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
- iommus = <&apps_smmu 0x1803 0x0>;
+ iommus = <&apps_smmu 0x2163 0x0400>,
+ <&apps_smmu 0x1183 0x0420>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
- iommus = <&apps_smmu 0x1804 0x0>;
+ iommus = <&apps_smmu 0x2164 0x0400>,
+ <&apps_smmu 0x1184 0x0420>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
- iommus = <&apps_smmu 0x1805 0x0>;
+ iommus = <&apps_smmu 0x2165 0x0400>,
+ <&apps_smmu 0x1185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2166 0x0400>,
+ <&apps_smmu 0x1186 0x0420>;
};
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2167 0x0400>,
+ <&apps_smmu 0x1187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2168 0x0400>,
+ <&apps_smmu 0x1188 0x0420>;
+ };
+
+ /* note: secure cb9 in downstream */
};
};
};
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Continue ordering DT nodes. Move RNG, UFS, system NoC and SLPI nodes
to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++--------------
1 file changed, 157 insertions(+), 157 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 061aa3fec1c4..c327dc925793 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1423,6 +1423,13 @@ spi13: spi@a94000 {
};
};
+ rng: rng@10d3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0 0x010d3000 0 0x1000>;
+ clocks = <&rpmhcc RPMH_HWKM_CLK>;
+ clock-names = "core";
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sm8350-config-noc";
reg = <0 0x01500000 0 0xa580>;
@@ -1643,18 +1650,76 @@ pcie1_phy: phy@1c0f000 {
status = "disabled";
};
- lpass_ag_noc: interconnect@3c40000 {
- compatible = "qcom,sm8350-lpass-ag-noc";
- reg = <0 0x03c40000 0 0xf080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
};
- compute_noc: interconnect@a0c0000 {
- compatible = "qcom,sm8350-compute-noc";
- reg = <0 0x0a0c0000 0 0xa180>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x188>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x188>,
+ <0 0x01d87a00 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
};
ipa: ipa@1e40000 {
@@ -1702,6 +1767,13 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,sm8350-lpass-ag-noc";
+ reg = <0 0x03c40000 0 0xf080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
mpss: remoteproc@4080000 {
compatible = "qcom,sm8350-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
@@ -1744,6 +1816,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ slpi: remoteproc@5c00000 {
+ compatible = "qcom,sm8350-slpi-pas";
+ reg = <0 0x05c00000 0 0x4000>;
+
+ interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_slpi_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_slpi_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_SLPI
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "slpi";
+ qcom,remote-pid = <3>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "sdsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x0541 0x0>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x0542 0x0>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x0543 0x0>;
+ /* note: shared-cb = <4> in downstream */
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8350-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2014,153 +2154,6 @@ qup_i2c19_default: qup-i2c19-default-state {
};
};
- rng: rng@10d3000 {
- compatible = "qcom,prng-ee";
- reg = <0 0x010d3000 0 0x1000>;
- clocks = <&rpmhcc RPMH_HWKM_CLK>;
- clock-names = "core";
- };
-
- ufs_mem_hc: ufshc@1d84000 {
- compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x3000>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
- phy-names = "ufsphy";
- lanes-per-direction = <2>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
-
- power-domains = <&gcc UFS_PHY_GDSC>;
-
- iommus = <&apps_smmu 0xe0 0x0>;
-
- clock-names =
- "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
- clocks =
- <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sm8350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
-
- slpi: remoteproc@5c00000 {
- compatible = "qcom,sm8350-slpi-pas";
- reg = <0 0x05c00000 0 0x4000>;
-
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
- power-domain-names = "lcx", "lmx";
-
- memory-region = <&pil_slpi_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&smp2p_slpi_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_SLPI
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- label = "slpi";
- qcom,remote-pid = <3>;
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "sdsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- iommus = <&apps_smmu 0x0541 0x0>;
- };
-
- compute-cb@2 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
- iommus = <&apps_smmu 0x0542 0x0>;
- };
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x0543 0x0>;
- /* note: shared-cb = <4> in downstream */
- };
- };
- };
- };
-
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@@ -2309,6 +2302,13 @@ system-cache-controller@9200000 {
reg-names = "llcc_base", "llcc_broadcast_base";
};
+ compute_noc: interconnect@a0c0000 {
+ compatible = "qcom,sm8350-compute-noc";
+ reg = <0 0x0a0c0000 0 0xa180>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Continue ordering DT nodes. Move RNG, UFS, system NoC and SLPI nodes
to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++--------------
1 file changed, 157 insertions(+), 157 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 061aa3fec1c4..c327dc925793 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1423,6 +1423,13 @@ spi13: spi@a94000 {
};
};
+ rng: rng@10d3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0 0x010d3000 0 0x1000>;
+ clocks = <&rpmhcc RPMH_HWKM_CLK>;
+ clock-names = "core";
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sm8350-config-noc";
reg = <0 0x01500000 0 0xa580>;
@@ -1643,18 +1650,76 @@ pcie1_phy: phy@1c0f000 {
status = "disabled";
};
- lpass_ag_noc: interconnect@3c40000 {
- compatible = "qcom,sm8350-lpass-ag-noc";
- reg = <0 0x03c40000 0 0xf080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
};
- compute_noc: interconnect@a0c0000 {
- compatible = "qcom,sm8350-compute-noc";
- reg = <0 0x0a0c0000 0 0xa180>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x1c4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x188>,
+ <0 0x01d87600 0 0x200>,
+ <0 0x01d87c00 0 0x200>,
+ <0 0x01d87800 0 0x188>,
+ <0 0x01d87a00 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
};
ipa: ipa@1e40000 {
@@ -1702,6 +1767,13 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,sm8350-lpass-ag-noc";
+ reg = <0 0x03c40000 0 0xf080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
mpss: remoteproc@4080000 {
compatible = "qcom,sm8350-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
@@ -1744,6 +1816,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ slpi: remoteproc@5c00000 {
+ compatible = "qcom,sm8350-slpi-pas";
+ reg = <0 0x05c00000 0 0x4000>;
+
+ interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8350_LCX>,
+ <&rpmhpd SM8350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_slpi_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_slpi_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_SLPI
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "slpi";
+ qcom,remote-pid = <3>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "sdsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x0541 0x0>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x0542 0x0>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x0543 0x0>;
+ /* note: shared-cb = <4> in downstream */
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8350-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2014,153 +2154,6 @@ qup_i2c19_default: qup-i2c19-default-state {
};
};
- rng: rng@10d3000 {
- compatible = "qcom,prng-ee";
- reg = <0 0x010d3000 0 0x1000>;
- clocks = <&rpmhcc RPMH_HWKM_CLK>;
- clock-names = "core";
- };
-
- ufs_mem_hc: ufshc@1d84000 {
- compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x3000>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
- phy-names = "ufsphy";
- lanes-per-direction = <2>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
-
- power-domains = <&gcc UFS_PHY_GDSC>;
-
- iommus = <&apps_smmu 0xe0 0x0>;
-
- clock-names =
- "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
- clocks =
- <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sm8350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
-
- slpi: remoteproc@5c00000 {
- compatible = "qcom,sm8350-slpi-pas";
- reg = <0 0x05c00000 0 0x4000>;
-
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
- <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
- power-domain-names = "lcx", "lmx";
-
- memory-region = <&pil_slpi_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&smp2p_slpi_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_SLPI
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- label = "slpi";
- qcom,remote-pid = <3>;
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "sdsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- iommus = <&apps_smmu 0x0541 0x0>;
- };
-
- compute-cb@2 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
- iommus = <&apps_smmu 0x0542 0x0>;
- };
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x0543 0x0>;
- /* note: shared-cb = <4> in downstream */
- };
- };
- };
- };
-
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@@ -2309,6 +2302,13 @@ system-cache-controller@9200000 {
reg-names = "llcc_base", "llcc_broadcast_base";
};
+ compute_noc: interconnect@a0c0000 {
+ compatible = "qcom,sm8350-compute-noc";
+ reg = <0 0x0a0c0000 0 0xa180>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 6/8] arm64: dts: qcom: sm8350: finish reordering nodes
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Finish reordering DT nodes. Move PDC, tsens, AOSS, SRAM, SPMI and TLMM
nodes to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 764 +++++++++++++--------------
1 file changed, 382 insertions(+), 382 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c327dc925793..e5b308957f88 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1884,276 +1884,6 @@ compute-cb@3 {
};
};
- pdc: interrupt-controller@b220000 {
- compatible = "qcom,sm8350-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
- qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
- <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
- <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
- <156 716 12>;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- interrupt-controller;
- };
-
- tsens0: thermal-sensor@c263000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c263000 0 0x1ff>, /* TM */
- <0 0x0c222000 0 0x8>; /* SROT */
- #qcom,sensors = <15>;
- interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@c265000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c265000 0 0x1ff>, /* TM */
- <0 0x0c223000 0 0x8>; /* SROT */
- #qcom,sensors = <14>;
- interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- aoss_qmp: power-management@c300000 {
- compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x400>;
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- #clock-cells = <0>;
- };
-
- sram@c3f0000 {
- compatible = "qcom,rpmh-stats";
- reg = <0 0x0c3f0000 0 0x400>;
- };
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0 0x0c440000 0x0 0x1100>,
- <0x0 0x0c600000 0x0 0x2000000>,
- <0x0 0x0e600000 0x0 0x100000>,
- <0x0 0x0e700000 0x0 0xa0000>,
- <0x0 0x0c40a000 0x0 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- tlmm: pinctrl@f100000 {
- compatible = "qcom,sm8350-tlmm";
- reg = <0 0x0f100000 0 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 204>;
- wakeup-parent = <&pdc>;
-
- sdc2_default_state: sdc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <16>;
- bias-pull-up;
- };
- };
-
- sdc2_sleep_state: sdc2-sleep-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <2>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- qup_uart3_default_state: qup-uart3-default-state {
- rx-pins {
- pins = "gpio18";
- function = "qup3";
- };
- tx-pins {
- pins = "gpio19";
- function = "qup3";
- };
- };
-
- qup_uart6_default: qup-uart6-default-state {
- pins = "gpio30", "gpio31";
- function = "qup6";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_uart18_default: qup-uart18-default-state {
- pins = "gpio58", "gpio59";
- function = "qup18";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c0_default: qup-i2c0-default-state {
- pins = "gpio4", "gpio5";
- function = "qup0";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c1_default: qup-i2c1-default-state {
- pins = "gpio8", "gpio9";
- function = "qup1";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c2_default: qup-i2c2-default-state {
- pins = "gpio12", "gpio13";
- function = "qup2";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c4_default: qup-i2c4-default-state {
- pins = "gpio20", "gpio21";
- function = "qup4";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c5_default: qup-i2c5-default-state {
- pins = "gpio24", "gpio25";
- function = "qup5";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c6_default: qup-i2c6-default-state {
- pins = "gpio28", "gpio29";
- function = "qup6";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c7_default: qup-i2c7-default-state {
- pins = "gpio32", "gpio33";
- function = "qup7";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c8_default: qup-i2c8-default-state {
- pins = "gpio36", "gpio37";
- function = "qup8";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c9_default: qup-i2c9-default-state {
- pins = "gpio40", "gpio41";
- function = "qup9";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c10_default: qup-i2c10-default-state {
- pins = "gpio44", "gpio45";
- function = "qup10";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c11_default: qup-i2c11-default-state {
- pins = "gpio48", "gpio49";
- function = "qup11";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c12_default: qup-i2c12-default-state {
- pins = "gpio52", "gpio53";
- function = "qup12";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c13_default: qup-i2c13-default-state {
- pins = "gpio0", "gpio1";
- function = "qup13";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c14_default: qup-i2c14-default-state {
- pins = "gpio56", "gpio57";
- function = "qup14";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c15_default: qup-i2c15-default-state {
- pins = "gpio60", "gpio61";
- function = "qup15";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c16_default: qup-i2c16-default-state {
- pins = "gpio64", "gpio65";
- function = "qup16";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c17_default: qup-i2c17-default-state {
- pins = "gpio72", "gpio73";
- function = "qup17";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c19_default: qup-i2c19-default-state {
- pins = "gpio76", "gpio77";
- function = "qup19";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@@ -2593,144 +2323,414 @@ mdss_dsi0_out: endpoint {
};
};
- mdss_dsi0_phy: phy@ae94400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae94400 0 0x200>,
- <0 0x0ae94600 0 0x280>,
- <0 0x0ae94900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-187500000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
+ <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
+ <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
+ <156 716 12>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <14>;
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0 0x0c440000 0x0 0x1100>,
+ <0x0 0x0c600000 0x0 0x2000000>,
+ <0x0 0x0e600000 0x0 0x100000>,
+ <0x0 0x0e700000 0x0 0xa0000>,
+ <0x0 0x0c40a000 0x0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 204>;
+ wakeup-parent = <&pdc>;
+
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_sleep_state: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- status = "disabled";
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
+ qup_uart3_default_state: qup-uart3-default-state {
+ rx-pins {
+ pins = "gpio18";
+ function = "qup3";
+ };
+ tx-pins {
+ pins = "gpio19";
+ function = "qup3";
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <5>;
+ qup_uart6_default: qup-uart6-default-state {
+ pins = "gpio30", "gpio31";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ qup_uart18_default: qup-uart18-default-state {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
+ };
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ qup_i2c0_default: qup-i2c0-default-state {
+ pins = "gpio4", "gpio5";
+ function = "qup0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c1_default: qup-i2c1-default-state {
+ pins = "gpio8", "gpio9";
+ function = "qup1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- phys = <&mdss_dsi1_phy>;
+ qup_i2c2_default: qup-i2c2-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c4_default: qup-i2c4-default-state {
+ pins = "gpio20", "gpio21";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- status = "disabled";
+ qup_i2c5_default: qup-i2c5-default-state {
+ pins = "gpio24", "gpio25";
+ function = "qup5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- dsi1_opp_table: opp-table {
- compatible = "operating-points-v2";
+ qup_i2c6_default: qup-i2c6-default-state {
+ pins = "gpio28", "gpio29";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- /* TODO: opp-187500000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-187500000 {
- opp-hz = /bits/ 64 <187500000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c7_default: qup-i2c7-default-state {
+ pins = "gpio32", "gpio33";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
+ };
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c8_default: qup-i2c8-default-state {
+ pins = "gpio36", "gpio37";
+ function = "qup8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
+ qup_i2c9_default: qup-i2c9-default-state {
+ pins = "gpio40", "gpio41";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c10_default: qup-i2c10-default-state {
+ pins = "gpio44", "gpio45";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
- };
+ qup_i2c11_default: qup-i2c11-default-state {
+ pins = "gpio48", "gpio49";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
- };
- };
+ qup_i2c12_default: qup-i2c12-default-state {
+ pins = "gpio52", "gpio53";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
};
- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ qup_i2c13_default: qup-i2c13-default-state {
+ pins = "gpio0", "gpio1";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- #clock-cells = <1>;
- #phy-cells = <0>;
+ qup_i2c14_default: qup-i2c14-default-state {
+ pins = "gpio56", "gpio57";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ qup_i2c15_default: qup-i2c15-default-state {
+ pins = "gpio60", "gpio61";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-disable;
+ };
- status = "disabled";
+ qup_i2c16_default: qup-i2c16-default-state {
+ pins = "gpio64", "gpio65";
+ function = "qup16";
+ drive-strength = <2>;
+ bias-disable;
};
- };
- dispcc: clock-controller@af00000 {
- compatible = "qcom,sm8350-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
- <0>,
- <0>;
- clock-names = "bi_tcxo",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_phy_pll_link_clk",
- "dp_phy_pll_vco_div_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ qup_i2c17_default: qup-i2c17-default-state {
+ pins = "gpio72", "gpio73";
+ function = "qup17";
+ drive-strength = <2>;
+ bias-disable;
+ };
- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c19_default: qup-i2c19-default-state {
+ pins = "gpio76", "gpio77";
+ function = "qup19";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
apps_smmu: iommu@15000000 {
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 6/8] arm64: dts: qcom: sm8350: finish reordering nodes
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Finish reordering DT nodes. Move PDC, tsens, AOSS, SRAM, SPMI and TLMM
nodes to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 764 +++++++++++++--------------
1 file changed, 382 insertions(+), 382 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c327dc925793..e5b308957f88 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1884,276 +1884,6 @@ compute-cb@3 {
};
};
- pdc: interrupt-controller@b220000 {
- compatible = "qcom,sm8350-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
- qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
- <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
- <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
- <156 716 12>;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- interrupt-controller;
- };
-
- tsens0: thermal-sensor@c263000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c263000 0 0x1ff>, /* TM */
- <0 0x0c222000 0 0x8>; /* SROT */
- #qcom,sensors = <15>;
- interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@c265000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c265000 0 0x1ff>, /* TM */
- <0 0x0c223000 0 0x8>; /* SROT */
- #qcom,sensors = <14>;
- interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- aoss_qmp: power-management@c300000 {
- compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x400>;
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- #clock-cells = <0>;
- };
-
- sram@c3f0000 {
- compatible = "qcom,rpmh-stats";
- reg = <0 0x0c3f0000 0 0x400>;
- };
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0 0x0c440000 0x0 0x1100>,
- <0x0 0x0c600000 0x0 0x2000000>,
- <0x0 0x0e600000 0x0 0x100000>,
- <0x0 0x0e700000 0x0 0xa0000>,
- <0x0 0x0c40a000 0x0 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- tlmm: pinctrl@f100000 {
- compatible = "qcom,sm8350-tlmm";
- reg = <0 0x0f100000 0 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 204>;
- wakeup-parent = <&pdc>;
-
- sdc2_default_state: sdc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <16>;
- bias-pull-up;
- };
- };
-
- sdc2_sleep_state: sdc2-sleep-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <2>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- qup_uart3_default_state: qup-uart3-default-state {
- rx-pins {
- pins = "gpio18";
- function = "qup3";
- };
- tx-pins {
- pins = "gpio19";
- function = "qup3";
- };
- };
-
- qup_uart6_default: qup-uart6-default-state {
- pins = "gpio30", "gpio31";
- function = "qup6";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_uart18_default: qup-uart18-default-state {
- pins = "gpio58", "gpio59";
- function = "qup18";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c0_default: qup-i2c0-default-state {
- pins = "gpio4", "gpio5";
- function = "qup0";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c1_default: qup-i2c1-default-state {
- pins = "gpio8", "gpio9";
- function = "qup1";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c2_default: qup-i2c2-default-state {
- pins = "gpio12", "gpio13";
- function = "qup2";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c4_default: qup-i2c4-default-state {
- pins = "gpio20", "gpio21";
- function = "qup4";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c5_default: qup-i2c5-default-state {
- pins = "gpio24", "gpio25";
- function = "qup5";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c6_default: qup-i2c6-default-state {
- pins = "gpio28", "gpio29";
- function = "qup6";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c7_default: qup-i2c7-default-state {
- pins = "gpio32", "gpio33";
- function = "qup7";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c8_default: qup-i2c8-default-state {
- pins = "gpio36", "gpio37";
- function = "qup8";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c9_default: qup-i2c9-default-state {
- pins = "gpio40", "gpio41";
- function = "qup9";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c10_default: qup-i2c10-default-state {
- pins = "gpio44", "gpio45";
- function = "qup10";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c11_default: qup-i2c11-default-state {
- pins = "gpio48", "gpio49";
- function = "qup11";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c12_default: qup-i2c12-default-state {
- pins = "gpio52", "gpio53";
- function = "qup12";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c13_default: qup-i2c13-default-state {
- pins = "gpio0", "gpio1";
- function = "qup13";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c14_default: qup-i2c14-default-state {
- pins = "gpio56", "gpio57";
- function = "qup14";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c15_default: qup-i2c15-default-state {
- pins = "gpio60", "gpio61";
- function = "qup15";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c16_default: qup-i2c16-default-state {
- pins = "gpio64", "gpio65";
- function = "qup16";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c17_default: qup-i2c17-default-state {
- pins = "gpio72", "gpio73";
- function = "qup17";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c19_default: qup-i2c19-default-state {
- pins = "gpio76", "gpio77";
- function = "qup19";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@@ -2593,144 +2323,414 @@ mdss_dsi0_out: endpoint {
};
};
- mdss_dsi0_phy: phy@ae94400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae94400 0 0x200>,
- <0 0x0ae94600 0 0x280>,
- <0 0x0ae94900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-187500000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
+ <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
+ <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
+ <156 716 12>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <14>;
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0 0x0c440000 0x0 0x1100>,
+ <0x0 0x0c600000 0x0 0x2000000>,
+ <0x0 0x0e600000 0x0 0x100000>,
+ <0x0 0x0e700000 0x0 0xa0000>,
+ <0x0 0x0c40a000 0x0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 204>;
+ wakeup-parent = <&pdc>;
+
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_sleep_state: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- status = "disabled";
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
+ qup_uart3_default_state: qup-uart3-default-state {
+ rx-pins {
+ pins = "gpio18";
+ function = "qup3";
+ };
+ tx-pins {
+ pins = "gpio19";
+ function = "qup3";
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <5>;
+ qup_uart6_default: qup-uart6-default-state {
+ pins = "gpio30", "gpio31";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ qup_uart18_default: qup-uart18-default-state {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
+ };
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ qup_i2c0_default: qup-i2c0-default-state {
+ pins = "gpio4", "gpio5";
+ function = "qup0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c1_default: qup-i2c1-default-state {
+ pins = "gpio8", "gpio9";
+ function = "qup1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- phys = <&mdss_dsi1_phy>;
+ qup_i2c2_default: qup-i2c2-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c4_default: qup-i2c4-default-state {
+ pins = "gpio20", "gpio21";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- status = "disabled";
+ qup_i2c5_default: qup-i2c5-default-state {
+ pins = "gpio24", "gpio25";
+ function = "qup5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- dsi1_opp_table: opp-table {
- compatible = "operating-points-v2";
+ qup_i2c6_default: qup-i2c6-default-state {
+ pins = "gpio28", "gpio29";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- /* TODO: opp-187500000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-187500000 {
- opp-hz = /bits/ 64 <187500000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c7_default: qup-i2c7-default-state {
+ pins = "gpio32", "gpio33";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
+ };
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c8_default: qup-i2c8-default-state {
+ pins = "gpio36", "gpio37";
+ function = "qup8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
+ qup_i2c9_default: qup-i2c9-default-state {
+ pins = "gpio40", "gpio41";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c10_default: qup-i2c10-default-state {
+ pins = "gpio44", "gpio45";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
- };
+ qup_i2c11_default: qup-i2c11-default-state {
+ pins = "gpio48", "gpio49";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
- };
- };
+ qup_i2c12_default: qup-i2c12-default-state {
+ pins = "gpio52", "gpio53";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
};
- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ qup_i2c13_default: qup-i2c13-default-state {
+ pins = "gpio0", "gpio1";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- #clock-cells = <1>;
- #phy-cells = <0>;
+ qup_i2c14_default: qup-i2c14-default-state {
+ pins = "gpio56", "gpio57";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-disable;
+ };
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ qup_i2c15_default: qup-i2c15-default-state {
+ pins = "gpio60", "gpio61";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-disable;
+ };
- status = "disabled";
+ qup_i2c16_default: qup-i2c16-default-state {
+ pins = "gpio64", "gpio65";
+ function = "qup16";
+ drive-strength = <2>;
+ bias-disable;
};
- };
- dispcc: clock-controller@af00000 {
- compatible = "qcom,sm8350-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
- <0>,
- <0>;
- clock-names = "bi_tcxo",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_phy_pll_link_clk",
- "dp_phy_pll_vco_div_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ qup_i2c17_default: qup-i2c17-default-state {
+ pins = "gpio72", "gpio73";
+ function = "qup17";
+ drive-strength = <2>;
+ bias-disable;
+ };
- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c19_default: qup-i2c19-default-state {
+ pins = "gpio76", "gpio77";
+ function = "qup19";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
apps_smmu: iommu@15000000 {
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Add device nodes required to enable GPU on the SM8350 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 178 +++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e5b308957f88..c0992cf54d3a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
@@ -1767,6 +1768,183 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+ reg = <0 0x03d00000 0 0x40000>,
+ <0 0x03d9e000 0 0x1000>,
+ <0 0x03d61000 0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&pil_gpu_mem>;
+ };
+
+ /* note: downstream checks gpu binning for 670 Mhz */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-840000000 {
+ opp-hz = /bits/ 64 <840000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+
+ opp-778000000 {
+ opp-hz = /bits/ 64 <778000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-738000000 {
+ opp-hz = /bits/ 64 <738000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-676000000 {
+ opp-hz = /bits/ 64 <676000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-491000000 {
+ opp-hz = /bits/ 64 <491000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-443000000 {
+ opp-hz = /bits/ 64 <443000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-379000000 {
+ opp-hz = /bits/ 64 <379000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+ reg = <0 0x03d6a000 0 0x34000>,
+ <0 0x03de0000 0 0x10000>,
+ <0 0x0b290000 0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+ clock-names = "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "ahb",
+ "hub",
+ "smmu_vote";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x400>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm8350-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+ reg = <0 0x03da0000 0 0x20000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HUB_AON_CLK>;
+ clock-names = "bus",
+ "iface",
+ "ahb",
+ "hlos1_vote_gpu_smmu",
+ "cx_gmu",
+ "hub_cx_int",
+ "hub_aon";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
+ };
+
lpass_ag_noc: interconnect@3c40000 {
compatible = "qcom,sm8350-lpass-ag-noc";
reg = <0 0x03c40000 0 0xf080>;
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Add device nodes required to enable GPU on the SM8350 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 178 +++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e5b308957f88..c0992cf54d3a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
@@ -1767,6 +1768,183 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+ reg = <0 0x03d00000 0 0x40000>,
+ <0 0x03d9e000 0 0x1000>,
+ <0 0x03d61000 0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&pil_gpu_mem>;
+ };
+
+ /* note: downstream checks gpu binning for 670 Mhz */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-840000000 {
+ opp-hz = /bits/ 64 <840000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+
+ opp-778000000 {
+ opp-hz = /bits/ 64 <778000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-738000000 {
+ opp-hz = /bits/ 64 <738000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-676000000 {
+ opp-hz = /bits/ 64 <676000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-491000000 {
+ opp-hz = /bits/ 64 <491000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-443000000 {
+ opp-hz = /bits/ 64 <443000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-379000000 {
+ opp-hz = /bits/ 64 <379000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+ reg = <0 0x03d6a000 0 0x34000>,
+ <0 0x03de0000 0 0x10000>,
+ <0 0x0b290000 0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+ clock-names = "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "ahb",
+ "hub",
+ "smmu_vote";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x400>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm8350-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+ reg = <0 0x03da0000 0 0x20000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HUB_AON_CLK>;
+ clock-names = "bus",
+ "iface",
+ "ahb",
+ "hlos1_vote_gpu_smmu",
+ "cx_gmu",
+ "hub_cx_int",
+ "hub_aon";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
+ };
+
lpass_ag_noc: interconnect@3c40000 {
compatible = "qcom,sm8350-lpass-ag-noc";
reg = <0 0x03c40000 0 0xf080>;
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-06 14:57 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index df841230d1b7..5e744423a673 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -284,6 +284,14 @@ &gpi_dma1 {
status = "okay";
};
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8350/a660_zap.mbn";
+ };
+};
+
&i2c15 {
clock-frequency = <400000>;
status = "okay";
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU
@ 2023-02-06 14:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-06 14:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index df841230d1b7..5e744423a673 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -284,6 +284,14 @@ &gpi_dma1 {
status = "okay";
};
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8350/a660_zap.mbn";
+ };
+};
+
&i2c15 {
clock-frequency = <400000>;
status = "okay";
--
2.39.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom, rpmpd: " Dmitry Baryshkov
@ 2023-02-06 20:19 ` Konrad Dybcio
-1 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-06 20:19 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Add define for another power saving state used on SM8350 for the GPU.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> include/dt-bindings/power/qcom-rpmpd.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
> index 4a30d10e6b7d..1bf8e87ecd7e 100644
> --- a/include/dt-bindings/power/qcom-rpmpd.h
> +++ b/include/dt-bindings/power/qcom-rpmpd.h
> @@ -211,6 +211,7 @@
> #define RPMH_REGULATOR_LEVEL_MIN_SVS 48
> #define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
> #define RPMH_REGULATOR_LEVEL_LOW_SVS 64
> +#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
> #define RPMH_REGULATOR_LEVEL_SVS 128
> #define RPMH_REGULATOR_LEVEL_SVS_L0 144
> #define RPMH_REGULATOR_LEVEL_SVS_L1 192
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
@ 2023-02-06 20:19 ` Konrad Dybcio
0 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-06 20:19 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Add define for another power saving state used on SM8350 for the GPU.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> include/dt-bindings/power/qcom-rpmpd.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
> index 4a30d10e6b7d..1bf8e87ecd7e 100644
> --- a/include/dt-bindings/power/qcom-rpmpd.h
> +++ b/include/dt-bindings/power/qcom-rpmpd.h
> @@ -211,6 +211,7 @@
> #define RPMH_REGULATOR_LEVEL_MIN_SVS 48
> #define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
> #define RPMH_REGULATOR_LEVEL_LOW_SVS 64
> +#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
> #define RPMH_REGULATOR_LEVEL_SVS 128
> #define RPMH_REGULATOR_LEVEL_SVS_L0 144
> #define RPMH_REGULATOR_LEVEL_SVS_L1 192
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom, gpucc-sm8350 into qcom, gpucc.yaml Dmitry Baryshkov
@ 2023-02-07 20:40 ` Rob Herring
-1 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2023-02-07 20:40 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: dri-devel, Stephen Boyd, David Airlie, Daniel Vetter,
Bjorn Andersson, Krzysztof Kozlowski, Abhinav Kumar, Sean Paul,
Konrad Dybcio, devicetree, freedreno, Taniya Das, Rob Herring,
Andy Gross, linux-arm-msm, Rob Clark, linux-clk,
Michael Turquette
On Mon, 06 Feb 2023 16:57:00 +0200, Dmitry Baryshkov wrote:
> The GPU clock controller bindings for the Qualcomm sm8350 platform are
> not correct. The driver uses .fw_name instead of using indices to bind
> parent clocks, thus demanding the clock-names usage. With the proper
> clock-names in place, the bindings becomes equal to the bindings defined
> by qcom,gpucc.yaml, so it is impractical to keep them in a separate
> file.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -------------------
> .../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
> 2 files changed, 2 insertions(+), 71 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
@ 2023-02-07 20:40 ` Rob Herring
0 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2023-02-07 20:40 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: devicetree, Michael Turquette, Stephen Boyd, Sean Paul,
Bjorn Andersson, Abhinav Kumar, dri-devel, Konrad Dybcio,
Rob Herring, Taniya Das, Andy Gross, Krzysztof Kozlowski,
linux-arm-msm, freedreno, linux-clk
On Mon, 06 Feb 2023 16:57:00 +0200, Dmitry Baryshkov wrote:
> The GPU clock controller bindings for the Qualcomm sm8350 platform are
> not correct. The driver uses .fw_name instead of using indices to bind
> parent clocks, thus demanding the clock-names usage. With the proper
> clock-names in place, the bindings becomes equal to the bindings defined
> by qcom,gpucc.yaml, so it is impractical to keep them in a separate
> file.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> .../bindings/clock/qcom,gpucc-sm8350.yaml | 71 -------------------
> .../devicetree/bindings/clock/qcom,gpucc.yaml | 2 +
> 2 files changed, 2 insertions(+), 71 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support
2023-02-06 14:57 ` Dmitry Baryshkov
@ 2023-02-07 20:41 ` Rob Herring
-1 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2023-02-07 20:41 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Sean Paul, devicetree, Stephen Boyd, linux-arm-msm,
Michael Turquette, Bjorn Andersson, Abhinav Kumar, dri-devel,
Taniya Das, Konrad Dybcio, Rob Herring, Andy Gross,
Krzysztof Kozlowski, freedreno, linux-clk
On Mon, 06 Feb 2023 16:57:02 +0200, Dmitry Baryshkov wrote:
> Add Adreno A660 to the A635 clause to define all version-specific
> properties. There is no need to add it to the top-level clause, since
> top-level compatible uses pattern to define compatible strings.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> Documentation/devicetree/bindings/display/msm/gmu.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support
@ 2023-02-07 20:41 ` Rob Herring
0 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2023-02-07 20:41 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Michael Turquette, Konrad Dybcio, Rob Herring, devicetree,
Rob Clark, Abhinav Kumar, linux-clk, David Airlie, dri-devel,
linux-arm-msm, Bjorn Andersson, Sean Paul, Andy Gross,
Stephen Boyd, Krzysztof Kozlowski, freedreno, Daniel Vetter,
Taniya Das
On Mon, 06 Feb 2023 16:57:02 +0200, Dmitry Baryshkov wrote:
> Add Adreno A660 to the A635 clause to define all version-specific
> properties. There is no need to add it to the top-level clause, since
> top-level compatible uses pattern to define compatible strings.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> Documentation/devicetree/bindings/display/msm/gmu.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
2023-02-06 14:57 ` Dmitry Baryshkov
@ 2023-02-08 9:22 ` Konrad Dybcio
-1 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-08 9:22 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
> position at the end of /soc/.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Moving adjacent nodes is pretty unreviewable without applying
the patch and just checking out the result :/
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
> 1 file changed, 614 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 0de42a333d32..061aa3fec1c4 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
> };
> };
>
> - apps_smmu: iommu@15000000 {
> - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> - reg = <0 0x15000000 0 0x100000>;
> - #iommu-cells = <2>;
> - #global-interrupts = <2>;
> - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> @@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
> clock-names = "core";
> };
>
> - intc: interrupt-controller@17a00000 {
> - compatible = "arm,gic-v3";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - #redistributor-regions = <1>;
> - redistributor-stride = <0 0x20000>;
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - };
> + ufs_mem_hc: ufshc@1d84000 {
> + compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
>
> - timer@17c20000 {
> - compatible = "arm,armv7-timer-mem";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0 0 0x20000000>;
> - reg = <0x0 0x17c20000 0x0 0x1000>;
> - clock-frequency = <19200000>;
> + power-domains = <&gcc UFS_PHY_GDSC>;
>
> - frame@17c21000 {
> - frame-number = <0>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c21000 0x1000>,
> - <0x17c22000 0x1000>;
> - };
> + iommus = <&apps_smmu 0xe0 0x0>;
>
> - frame@17c23000 {
> - frame-number = <1>;
> - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c23000 0x1000>;
> - status = "disabled";
> - };
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
>
> - frame@17c25000 {
> - frame-number = <2>;
> - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c25000 0x1000>;
> - status = "disabled";
> - };
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sm8350-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0x1c4>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>
> - frame@17c27000 {
> - frame-number = <3>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c27000 0x1000>;
> - status = "disabled";
> - };
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
>
> - frame@17c29000 {
> - frame-number = <4>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c29000 0x1000>;
> - status = "disabled";
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x188>,
> + <0 0x01d87600 0 0x200>,
> + <0 0x01d87c00 0 0x200>,
> + <0 0x01d87800 0 0x188>,
> + <0 0x01d87a00 0 0x200>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> };
> + };
>
> - frame@17c2b000 {
> - frame-number = <5>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2b000 0x1000>;
> - status = "disabled";
> - };
> + slpi: remoteproc@5c00000 {
> + compatible = "qcom,sm8350-slpi-pas";
> + reg = <0 0x05c00000 0 0x4000>;
>
> - frame@17c2d000 {
> - frame-number = <6>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2d000 0x1000>;
> - status = "disabled";
> - };
> - };
> + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
>
> - apps_rsc: rsc@18200000 {
> - label = "apps_rsc";
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 0>;
> - power-domains = <&CLUSTER_PD>;
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm8350-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sm8350-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp10 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> - };
> -
> - cpufreq_hw: cpufreq@18591000 {
> - compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> - reg = <0 0x18591000 0 0x1000>,
> - <0 0x18592000 0 0x1000>,
> - <0 0x18593000 0 0x1000>;
> - reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> - clock-names = "xo", "alternate";
> -
> - #freq-domain-cells = <1>;
> - };
> -
> - ufs_mem_hc: ufshc@1d84000 {
> - compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> - "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>;
> - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> - phy-names = "ufsphy";
> - lanes-per-direction = <2>;
> - #reset-cells = <1>;
> - resets = <&gcc GCC_UFS_PHY_BCR>;
> - reset-names = "rst";
> -
> - power-domains = <&gcc UFS_PHY_GDSC>;
> -
> - iommus = <&apps_smmu 0xe0 0x0>;
> -
> - clock-names =
> - "core_clk",
> - "bus_aggr_clk",
> - "iface_clk",
> - "core_clk_unipro",
> - "ref_clk",
> - "tx_lane0_sync_clk",
> - "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk";
> - clocks =
> - <&gcc GCC_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_UFS_PHY_AHB_CLK>,
> - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> - status = "disabled";
> - };
> -
> - ufs_mem_phy: phy@1d87000 {
> - compatible = "qcom,sm8350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c4>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> -
> - resets = <&ufs_mem_hc 0>;
> - reset-names = "ufsphy";
> - status = "disabled";
> -
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x188>,
> - <0 0x01d87600 0 0x200>,
> - <0 0x01d87c00 0 0x200>,
> - <0 0x01d87800 0 0x188>,
> - <0 0x01d87a00 0 0x200>;
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - slpi: remoteproc@5c00000 {
> - compatible = "qcom,sm8350-slpi-pas";
> - reg = <0 0x05c00000 0 0x4000>;
> -
> - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
>
> power-domains = <&rpmhpd SM8350_LCX>,
> <&rpmhpd SM8350_LMX>;
> @@ -2427,176 +2161,67 @@ compute-cb@3 {
> };
> };
>
> - cdsp: remoteproc@98900000 {
> - compatible = "qcom,sm8350-cdsp-pas";
> - reg = <0 0x98900000 0 0x1400000>;
> -
> - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> + sdhc_2: mmc@8804000 {
> + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
>
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
>
> - power-domains = <&rpmhpd SM8350_CX>,
> - <&rpmhpd SM8350_MXC>;
> - power-domain-names = "cx", "mxc";
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "core", "xo";
> + resets = <&gcc GCC_SDCC2_BCR>;
> + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> + iommus = <&apps_smmu 0x4a0 0x0>;
> + power-domains = <&rpmhpd SM8350_CX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + bus-width = <4>;
> + dma-coherent;
>
> - interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> + status = "disabled";
>
> - memory-region = <&pil_cdsp_mem>;
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - qcom,qmp = <&aoss_qmp>;
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
>
> - qcom,smem-states = <&smp2p_cdsp_out 0>;
> - qcom,smem-state-names = "stop";
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
>
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8350-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> status = "disabled";
> + #phy-cells = <0>;
>
> - glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP
> - IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> - label = "cdsp";
> - qcom,remote-pid = <5>;
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
>
> - fastrpc {
> - compatible = "qcom,fastrpc";
> - qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "cdsp";
> - qcom,non-secure-domain;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + usb_2_hsphy: phy@88e4000 {
> + compatible = "qcom,sm8250-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e4000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
>
> - compute-cb@1 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <1>;
> - iommus = <&apps_smmu 0x2161 0x0400>,
> - <&apps_smmu 0x1181 0x0420>;
> - };
> -
> - compute-cb@2 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <2>;
> - iommus = <&apps_smmu 0x2162 0x0400>,
> - <&apps_smmu 0x1182 0x0420>;
> - };
> -
> - compute-cb@3 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <3>;
> - iommus = <&apps_smmu 0x2163 0x0400>,
> - <&apps_smmu 0x1183 0x0420>;
> - };
> -
> - compute-cb@4 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <4>;
> - iommus = <&apps_smmu 0x2164 0x0400>,
> - <&apps_smmu 0x1184 0x0420>;
> - };
> -
> - compute-cb@5 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <5>;
> - iommus = <&apps_smmu 0x2165 0x0400>,
> - <&apps_smmu 0x1185 0x0420>;
> - };
> -
> - compute-cb@6 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <6>;
> - iommus = <&apps_smmu 0x2166 0x0400>,
> - <&apps_smmu 0x1186 0x0420>;
> - };
> -
> - compute-cb@7 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <7>;
> - iommus = <&apps_smmu 0x2167 0x0400>,
> - <&apps_smmu 0x1187 0x0420>;
> - };
> -
> - compute-cb@8 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <8>;
> - iommus = <&apps_smmu 0x2168 0x0400>,
> - <&apps_smmu 0x1188 0x0420>;
> - };
> -
> - /* note: secure cb9 in downstream */
> - };
> - };
> - };
> -
> - sdhc_2: mmc@8804000 {
> - compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> - reg = <0 0x08804000 0 0x1000>;
> -
> - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "hc_irq", "pwr_irq";
> -
> - clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> - <&gcc GCC_SDCC2_APPS_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "core", "xo";
> - resets = <&gcc GCC_SDCC2_BCR>;
> - interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> - interconnect-names = "sdhc-ddr","cpu-sdhc";
> - iommus = <&apps_smmu 0x4a0 0x0>;
> - power-domains = <&rpmhpd SM8350_CX>;
> - operating-points-v2 = <&sdhc2_opp_table>;
> - bus-width = <4>;
> - dma-coherent;
> -
> - status = "disabled";
> -
> - sdhc2_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - };
> -
> - opp-202000000 {
> - opp-hz = /bits/ 64 <202000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> - };
> - };
> - };
> -
> - usb_1_hsphy: phy@88e3000 {
> - compatible = "qcom,sm8350-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e3000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> -
> - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> - };
> -
> - usb_2_hsphy: phy@88e4000 {
> - compatible = "qcom,sm8250-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e4000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> };
> @@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
> status = "disabled";
> };
>
> - mdss_dsi1: dsi@ae96000 {
> - compatible = "qcom,mdss-dsi-ctrl";
> - reg = <0 0x0ae96000 0 0x400>;
> - reg-names = "dsi_ctrl";
> + mdss_dsi1: dsi@ae96000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae96000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <5>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>;
> +
> + operating-points-v2 = <&dsi1_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + phys = <&mdss_dsi1_phy>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + dsi1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + /* TODO: opp-187500000 should work with
> + * &rpmhpd_opp_low_svs, but one some of
> + * sm8350_hdk boards reboot using this
> + * opp.
> + */
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dsi1_in: endpoint {
> + remote-endpoint = <&dpu_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + mdss_dsi1_phy: phy@ae96400 {
> + compatible = "qcom,sm8350-dsi-phy-5nm";
> + reg = <0 0x0ae96400 0 0x200>,
> + <0 0x0ae96600 0 0x280>,
> + <0 0x0ae96900 0 0x27c>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> + };
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm8350-dispcc";
> + reg = <0 0x0af00000 0 0x10000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> + <0>,
> + <0>;
> + clock-names = "bi_tcxo",
> + "dsi0_phy_pll_out_byteclk",
> + "dsi0_phy_pll_out_dsiclk",
> + "dsi1_phy_pll_out_byteclk",
> + "dsi1_phy_pll_out_dsiclk",
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> +
> + power-domains = <&rpmhpd SM8350_MMCX>;
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> + reg = <0 0x15000000 0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + adsp: remoteproc@17300000 {
> + compatible = "qcom,sm8350-adsp-pas";
> + reg = <0 0x17300000 0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd SM8350_LCX>,
> + <&rpmhpd SM8350_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x1803 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x1804 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x1805 0x0>;
> + };
> + };
> + };
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0 0x20000>;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0x20000000>;
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c23000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c25000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c27000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c29000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2b000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2d000 0x1000>;
> + status = "disabled";
> + };
> + };
>
> - interrupt-parent = <&mdss>;
> - interrupts = <5>;
> + apps_rsc: rsc@18200000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
> + power-domains = <&CLUSTER_PD>;
>
> - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> - <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> - <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&gcc GCC_DISP_HF_AXI_CLK>;
> - clock-names = "byte",
> - "byte_intf",
> - "pixel",
> - "core",
> - "iface",
> - "bus";
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8350-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
>
> - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> - assigned-clock-parents = <&mdss_dsi1_phy 0>,
> - <&mdss_dsi1_phy 1>;
> + rpmhpd: power-controller {
> + compatible = "qcom,sm8350-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
>
> - operating-points-v2 = <&dsi1_opp_table>;
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - phys = <&mdss_dsi1_phy>;
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
>
> - status = "disabled";
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
>
> - dsi1_opp_table: opp-table {
> - compatible = "operating-points-v2";
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
>
> - /* TODO: opp-187500000 should work with
> - * &rpmhpd_opp_low_svs, but one some of
> - * sm8350_hdk boards reboot using this
> - * opp.
> - */
> - opp-187500000 {
> - opp-hz = /bits/ 64 <187500000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> };
>
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> };
>
> - opp-358000000 {
> - opp-hz = /bits/ 64 <358000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> };
> - };
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
>
> - port@0 {
> - reg = <0>;
> - mdss_dsi1_in: endpoint {
> - remote-endpoint = <&dpu_intf2_out>;
> - };
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> };
>
> - port@1 {
> - reg = <1>;
> - mdss_dsi1_out: endpoint {
> - };
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> };
> };
> };
>
> - mdss_dsi1_phy: phy@ae96400 {
> - compatible = "qcom,sm8350-dsi-phy-5nm";
> - reg = <0 0x0ae96400 0 0x200>,
> - <0 0x0ae96600 0 0x280>,
> - <0 0x0ae96900 0 0x27c>;
> - reg-names = "dsi_phy",
> - "dsi_phy_lane",
> - "dsi_pll";
> -
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> -
> - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "ref";
> -
> - status = "disabled";
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> };
> };
>
> - dispcc: clock-controller@af00000 {
> - compatible = "qcom,sm8350-dispcc";
> - reg = <0 0x0af00000 0 0x10000>;
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> - <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> - <0>,
> - <0>;
> - clock-names = "bi_tcxo",
> - "dsi0_phy_pll_out_byteclk",
> - "dsi0_phy_pll_out_dsiclk",
> - "dsi1_phy_pll_out_byteclk",
> - "dsi1_phy_pll_out_dsiclk",
> - "dp_phy_pll_link_clk",
> - "dp_phy_pll_vco_div_clk";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> + reg = <0 0x18591000 0 0x1000>,
> + <0 0x18592000 0 0x1000>,
> + <0 0x18593000 0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
>
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> };
>
> - adsp: remoteproc@17300000 {
> - compatible = "qcom,sm8350-adsp-pas";
> - reg = <0 0x17300000 0 0x100>;
> + cdsp: remoteproc@98900000 {
> + compatible = "qcom,sm8350-cdsp-pas";
> + reg = <0 0x98900000 0 0x1400000>;
>
> - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "wdog", "fatal", "ready",
> "handover", "stop-ack";
>
> clocks = <&rpmhcc RPMH_CXO_CLK>;
> clock-names = "xo";
>
> - power-domains = <&rpmhpd SM8350_LCX>,
> - <&rpmhpd SM8350_LMX>;
> - power-domain-names = "lcx", "lmx";
> + power-domains = <&rpmhpd SM8350_CX>,
> + <&rpmhpd SM8350_MXC>;
> + power-domain-names = "cx", "mxc";
>
> - memory-region = <&pil_adsp_mem>;
> + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp_mem>;
>
> qcom,qmp = <&aoss_qmp>;
>
> - qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-states = <&smp2p_cdsp_out 0>;
> qcom,smem-state-names = "stop";
>
> status = "disabled";
>
> glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_LPASS
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP>;
>
> - label = "lpass";
> - qcom,remote-pid = <2>;
> + label = "cdsp";
> + qcom,remote-pid = <5>;
>
> fastrpc {
> compatible = "qcom,fastrpc";
> qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "adsp";
> + label = "cdsp";
> qcom,non-secure-domain;
> #address-cells = <1>;
> #size-cells = <0>;
>
> + compute-cb@1 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x2161 0x0400>,
> + <&apps_smmu 0x1181 0x0420>;
> + };
> +
> + compute-cb@2 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x2162 0x0400>,
> + <&apps_smmu 0x1182 0x0420>;
> + };
> +
> compute-cb@3 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <3>;
> - iommus = <&apps_smmu 0x1803 0x0>;
> + iommus = <&apps_smmu 0x2163 0x0400>,
> + <&apps_smmu 0x1183 0x0420>;
> };
>
> compute-cb@4 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <4>;
> - iommus = <&apps_smmu 0x1804 0x0>;
> + iommus = <&apps_smmu 0x2164 0x0400>,
> + <&apps_smmu 0x1184 0x0420>;
> };
>
> compute-cb@5 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <5>;
> - iommus = <&apps_smmu 0x1805 0x0>;
> + iommus = <&apps_smmu 0x2165 0x0400>,
> + <&apps_smmu 0x1185 0x0420>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x2166 0x0400>,
> + <&apps_smmu 0x1186 0x0420>;
> };
> +
> + compute-cb@7 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <7>;
> + iommus = <&apps_smmu 0x2167 0x0400>,
> + <&apps_smmu 0x1187 0x0420>;
> + };
> +
> + compute-cb@8 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <8>;
> + iommus = <&apps_smmu 0x2168 0x0400>,
> + <&apps_smmu 0x1188 0x0420>;
> + };
> +
> + /* note: secure cb9 in downstream */
> };
> };
> };
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
@ 2023-02-08 9:22 ` Konrad Dybcio
0 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-08 9:22 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
> position at the end of /soc/.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Moving adjacent nodes is pretty unreviewable without applying
the patch and just checking out the result :/
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
> 1 file changed, 614 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 0de42a333d32..061aa3fec1c4 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
> };
> };
>
> - apps_smmu: iommu@15000000 {
> - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> - reg = <0 0x15000000 0 0x100000>;
> - #iommu-cells = <2>;
> - #global-interrupts = <2>;
> - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> @@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
> clock-names = "core";
> };
>
> - intc: interrupt-controller@17a00000 {
> - compatible = "arm,gic-v3";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - #redistributor-regions = <1>;
> - redistributor-stride = <0 0x20000>;
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - };
> + ufs_mem_hc: ufshc@1d84000 {
> + compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
>
> - timer@17c20000 {
> - compatible = "arm,armv7-timer-mem";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0 0 0x20000000>;
> - reg = <0x0 0x17c20000 0x0 0x1000>;
> - clock-frequency = <19200000>;
> + power-domains = <&gcc UFS_PHY_GDSC>;
>
> - frame@17c21000 {
> - frame-number = <0>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c21000 0x1000>,
> - <0x17c22000 0x1000>;
> - };
> + iommus = <&apps_smmu 0xe0 0x0>;
>
> - frame@17c23000 {
> - frame-number = <1>;
> - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c23000 0x1000>;
> - status = "disabled";
> - };
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
>
> - frame@17c25000 {
> - frame-number = <2>;
> - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c25000 0x1000>;
> - status = "disabled";
> - };
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sm8350-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0x1c4>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>
> - frame@17c27000 {
> - frame-number = <3>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c27000 0x1000>;
> - status = "disabled";
> - };
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
>
> - frame@17c29000 {
> - frame-number = <4>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c29000 0x1000>;
> - status = "disabled";
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x188>,
> + <0 0x01d87600 0 0x200>,
> + <0 0x01d87c00 0 0x200>,
> + <0 0x01d87800 0 0x188>,
> + <0 0x01d87a00 0 0x200>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> };
> + };
>
> - frame@17c2b000 {
> - frame-number = <5>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2b000 0x1000>;
> - status = "disabled";
> - };
> + slpi: remoteproc@5c00000 {
> + compatible = "qcom,sm8350-slpi-pas";
> + reg = <0 0x05c00000 0 0x4000>;
>
> - frame@17c2d000 {
> - frame-number = <6>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2d000 0x1000>;
> - status = "disabled";
> - };
> - };
> + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
>
> - apps_rsc: rsc@18200000 {
> - label = "apps_rsc";
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 0>;
> - power-domains = <&CLUSTER_PD>;
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm8350-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sm8350-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp10 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> - };
> -
> - cpufreq_hw: cpufreq@18591000 {
> - compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> - reg = <0 0x18591000 0 0x1000>,
> - <0 0x18592000 0 0x1000>,
> - <0 0x18593000 0 0x1000>;
> - reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> - clock-names = "xo", "alternate";
> -
> - #freq-domain-cells = <1>;
> - };
> -
> - ufs_mem_hc: ufshc@1d84000 {
> - compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> - "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>;
> - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> - phy-names = "ufsphy";
> - lanes-per-direction = <2>;
> - #reset-cells = <1>;
> - resets = <&gcc GCC_UFS_PHY_BCR>;
> - reset-names = "rst";
> -
> - power-domains = <&gcc UFS_PHY_GDSC>;
> -
> - iommus = <&apps_smmu 0xe0 0x0>;
> -
> - clock-names =
> - "core_clk",
> - "bus_aggr_clk",
> - "iface_clk",
> - "core_clk_unipro",
> - "ref_clk",
> - "tx_lane0_sync_clk",
> - "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk";
> - clocks =
> - <&gcc GCC_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_UFS_PHY_AHB_CLK>,
> - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> - status = "disabled";
> - };
> -
> - ufs_mem_phy: phy@1d87000 {
> - compatible = "qcom,sm8350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c4>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> -
> - resets = <&ufs_mem_hc 0>;
> - reset-names = "ufsphy";
> - status = "disabled";
> -
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x188>,
> - <0 0x01d87600 0 0x200>,
> - <0 0x01d87c00 0 0x200>,
> - <0 0x01d87800 0 0x188>,
> - <0 0x01d87a00 0 0x200>;
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - slpi: remoteproc@5c00000 {
> - compatible = "qcom,sm8350-slpi-pas";
> - reg = <0 0x05c00000 0 0x4000>;
> -
> - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
>
> power-domains = <&rpmhpd SM8350_LCX>,
> <&rpmhpd SM8350_LMX>;
> @@ -2427,176 +2161,67 @@ compute-cb@3 {
> };
> };
>
> - cdsp: remoteproc@98900000 {
> - compatible = "qcom,sm8350-cdsp-pas";
> - reg = <0 0x98900000 0 0x1400000>;
> -
> - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> + sdhc_2: mmc@8804000 {
> + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
>
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
>
> - power-domains = <&rpmhpd SM8350_CX>,
> - <&rpmhpd SM8350_MXC>;
> - power-domain-names = "cx", "mxc";
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "core", "xo";
> + resets = <&gcc GCC_SDCC2_BCR>;
> + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> + iommus = <&apps_smmu 0x4a0 0x0>;
> + power-domains = <&rpmhpd SM8350_CX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + bus-width = <4>;
> + dma-coherent;
>
> - interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> + status = "disabled";
>
> - memory-region = <&pil_cdsp_mem>;
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - qcom,qmp = <&aoss_qmp>;
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
>
> - qcom,smem-states = <&smp2p_cdsp_out 0>;
> - qcom,smem-state-names = "stop";
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
>
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8350-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> status = "disabled";
> + #phy-cells = <0>;
>
> - glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP
> - IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> - label = "cdsp";
> - qcom,remote-pid = <5>;
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
>
> - fastrpc {
> - compatible = "qcom,fastrpc";
> - qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "cdsp";
> - qcom,non-secure-domain;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + usb_2_hsphy: phy@88e4000 {
> + compatible = "qcom,sm8250-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e4000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
>
> - compute-cb@1 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <1>;
> - iommus = <&apps_smmu 0x2161 0x0400>,
> - <&apps_smmu 0x1181 0x0420>;
> - };
> -
> - compute-cb@2 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <2>;
> - iommus = <&apps_smmu 0x2162 0x0400>,
> - <&apps_smmu 0x1182 0x0420>;
> - };
> -
> - compute-cb@3 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <3>;
> - iommus = <&apps_smmu 0x2163 0x0400>,
> - <&apps_smmu 0x1183 0x0420>;
> - };
> -
> - compute-cb@4 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <4>;
> - iommus = <&apps_smmu 0x2164 0x0400>,
> - <&apps_smmu 0x1184 0x0420>;
> - };
> -
> - compute-cb@5 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <5>;
> - iommus = <&apps_smmu 0x2165 0x0400>,
> - <&apps_smmu 0x1185 0x0420>;
> - };
> -
> - compute-cb@6 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <6>;
> - iommus = <&apps_smmu 0x2166 0x0400>,
> - <&apps_smmu 0x1186 0x0420>;
> - };
> -
> - compute-cb@7 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <7>;
> - iommus = <&apps_smmu 0x2167 0x0400>,
> - <&apps_smmu 0x1187 0x0420>;
> - };
> -
> - compute-cb@8 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <8>;
> - iommus = <&apps_smmu 0x2168 0x0400>,
> - <&apps_smmu 0x1188 0x0420>;
> - };
> -
> - /* note: secure cb9 in downstream */
> - };
> - };
> - };
> -
> - sdhc_2: mmc@8804000 {
> - compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> - reg = <0 0x08804000 0 0x1000>;
> -
> - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "hc_irq", "pwr_irq";
> -
> - clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> - <&gcc GCC_SDCC2_APPS_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "core", "xo";
> - resets = <&gcc GCC_SDCC2_BCR>;
> - interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> - interconnect-names = "sdhc-ddr","cpu-sdhc";
> - iommus = <&apps_smmu 0x4a0 0x0>;
> - power-domains = <&rpmhpd SM8350_CX>;
> - operating-points-v2 = <&sdhc2_opp_table>;
> - bus-width = <4>;
> - dma-coherent;
> -
> - status = "disabled";
> -
> - sdhc2_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - };
> -
> - opp-202000000 {
> - opp-hz = /bits/ 64 <202000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> - };
> - };
> - };
> -
> - usb_1_hsphy: phy@88e3000 {
> - compatible = "qcom,sm8350-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e3000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> -
> - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> - };
> -
> - usb_2_hsphy: phy@88e4000 {
> - compatible = "qcom,sm8250-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e4000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> };
> @@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
> status = "disabled";
> };
>
> - mdss_dsi1: dsi@ae96000 {
> - compatible = "qcom,mdss-dsi-ctrl";
> - reg = <0 0x0ae96000 0 0x400>;
> - reg-names = "dsi_ctrl";
> + mdss_dsi1: dsi@ae96000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae96000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <5>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>;
> +
> + operating-points-v2 = <&dsi1_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + phys = <&mdss_dsi1_phy>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + dsi1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + /* TODO: opp-187500000 should work with
> + * &rpmhpd_opp_low_svs, but one some of
> + * sm8350_hdk boards reboot using this
> + * opp.
> + */
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dsi1_in: endpoint {
> + remote-endpoint = <&dpu_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + mdss_dsi1_phy: phy@ae96400 {
> + compatible = "qcom,sm8350-dsi-phy-5nm";
> + reg = <0 0x0ae96400 0 0x200>,
> + <0 0x0ae96600 0 0x280>,
> + <0 0x0ae96900 0 0x27c>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> + };
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm8350-dispcc";
> + reg = <0 0x0af00000 0 0x10000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> + <0>,
> + <0>;
> + clock-names = "bi_tcxo",
> + "dsi0_phy_pll_out_byteclk",
> + "dsi0_phy_pll_out_dsiclk",
> + "dsi1_phy_pll_out_byteclk",
> + "dsi1_phy_pll_out_dsiclk",
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> +
> + power-domains = <&rpmhpd SM8350_MMCX>;
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> + reg = <0 0x15000000 0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + adsp: remoteproc@17300000 {
> + compatible = "qcom,sm8350-adsp-pas";
> + reg = <0 0x17300000 0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd SM8350_LCX>,
> + <&rpmhpd SM8350_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x1803 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x1804 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x1805 0x0>;
> + };
> + };
> + };
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0 0x20000>;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0x20000000>;
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c23000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c25000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c27000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c29000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2b000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2d000 0x1000>;
> + status = "disabled";
> + };
> + };
>
> - interrupt-parent = <&mdss>;
> - interrupts = <5>;
> + apps_rsc: rsc@18200000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
> + power-domains = <&CLUSTER_PD>;
>
> - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> - <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> - <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&gcc GCC_DISP_HF_AXI_CLK>;
> - clock-names = "byte",
> - "byte_intf",
> - "pixel",
> - "core",
> - "iface",
> - "bus";
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8350-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
>
> - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> - assigned-clock-parents = <&mdss_dsi1_phy 0>,
> - <&mdss_dsi1_phy 1>;
> + rpmhpd: power-controller {
> + compatible = "qcom,sm8350-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
>
> - operating-points-v2 = <&dsi1_opp_table>;
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - phys = <&mdss_dsi1_phy>;
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
>
> - status = "disabled";
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
>
> - dsi1_opp_table: opp-table {
> - compatible = "operating-points-v2";
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
>
> - /* TODO: opp-187500000 should work with
> - * &rpmhpd_opp_low_svs, but one some of
> - * sm8350_hdk boards reboot using this
> - * opp.
> - */
> - opp-187500000 {
> - opp-hz = /bits/ 64 <187500000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> };
>
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> };
>
> - opp-358000000 {
> - opp-hz = /bits/ 64 <358000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> };
> - };
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
>
> - port@0 {
> - reg = <0>;
> - mdss_dsi1_in: endpoint {
> - remote-endpoint = <&dpu_intf2_out>;
> - };
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> };
>
> - port@1 {
> - reg = <1>;
> - mdss_dsi1_out: endpoint {
> - };
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> };
> };
> };
>
> - mdss_dsi1_phy: phy@ae96400 {
> - compatible = "qcom,sm8350-dsi-phy-5nm";
> - reg = <0 0x0ae96400 0 0x200>,
> - <0 0x0ae96600 0 0x280>,
> - <0 0x0ae96900 0 0x27c>;
> - reg-names = "dsi_phy",
> - "dsi_phy_lane",
> - "dsi_pll";
> -
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> -
> - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "ref";
> -
> - status = "disabled";
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> };
> };
>
> - dispcc: clock-controller@af00000 {
> - compatible = "qcom,sm8350-dispcc";
> - reg = <0 0x0af00000 0 0x10000>;
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> - <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> - <0>,
> - <0>;
> - clock-names = "bi_tcxo",
> - "dsi0_phy_pll_out_byteclk",
> - "dsi0_phy_pll_out_dsiclk",
> - "dsi1_phy_pll_out_byteclk",
> - "dsi1_phy_pll_out_dsiclk",
> - "dp_phy_pll_link_clk",
> - "dp_phy_pll_vco_div_clk";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> + reg = <0 0x18591000 0 0x1000>,
> + <0 0x18592000 0 0x1000>,
> + <0 0x18593000 0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
>
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> };
>
> - adsp: remoteproc@17300000 {
> - compatible = "qcom,sm8350-adsp-pas";
> - reg = <0 0x17300000 0 0x100>;
> + cdsp: remoteproc@98900000 {
> + compatible = "qcom,sm8350-cdsp-pas";
> + reg = <0 0x98900000 0 0x1400000>;
>
> - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "wdog", "fatal", "ready",
> "handover", "stop-ack";
>
> clocks = <&rpmhcc RPMH_CXO_CLK>;
> clock-names = "xo";
>
> - power-domains = <&rpmhpd SM8350_LCX>,
> - <&rpmhpd SM8350_LMX>;
> - power-domain-names = "lcx", "lmx";
> + power-domains = <&rpmhpd SM8350_CX>,
> + <&rpmhpd SM8350_MXC>;
> + power-domain-names = "cx", "mxc";
>
> - memory-region = <&pil_adsp_mem>;
> + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp_mem>;
>
> qcom,qmp = <&aoss_qmp>;
>
> - qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-states = <&smp2p_cdsp_out 0>;
> qcom,smem-state-names = "stop";
>
> status = "disabled";
>
> glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_LPASS
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP>;
>
> - label = "lpass";
> - qcom,remote-pid = <2>;
> + label = "cdsp";
> + qcom,remote-pid = <5>;
>
> fastrpc {
> compatible = "qcom,fastrpc";
> qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "adsp";
> + label = "cdsp";
> qcom,non-secure-domain;
> #address-cells = <1>;
> #size-cells = <0>;
>
> + compute-cb@1 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x2161 0x0400>,
> + <&apps_smmu 0x1181 0x0420>;
> + };
> +
> + compute-cb@2 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x2162 0x0400>,
> + <&apps_smmu 0x1182 0x0420>;
> + };
> +
> compute-cb@3 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <3>;
> - iommus = <&apps_smmu 0x1803 0x0>;
> + iommus = <&apps_smmu 0x2163 0x0400>,
> + <&apps_smmu 0x1183 0x0420>;
> };
>
> compute-cb@4 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <4>;
> - iommus = <&apps_smmu 0x1804 0x0>;
> + iommus = <&apps_smmu 0x2164 0x0400>,
> + <&apps_smmu 0x1184 0x0420>;
> };
>
> compute-cb@5 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <5>;
> - iommus = <&apps_smmu 0x1805 0x0>;
> + iommus = <&apps_smmu 0x2165 0x0400>,
> + <&apps_smmu 0x1185 0x0420>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x2166 0x0400>,
> + <&apps_smmu 0x1186 0x0420>;
> };
> +
> + compute-cb@7 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <7>;
> + iommus = <&apps_smmu 0x2167 0x0400>,
> + <&apps_smmu 0x1187 0x0420>;
> + };
> +
> + compute-cb@8 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <8>;
> + iommus = <&apps_smmu 0x2168 0x0400>,
> + <&apps_smmu 0x1188 0x0420>;
> + };
> +
> + /* note: secure cb9 in downstream */
> };
> };
> };
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU
2023-02-06 14:57 ` Dmitry Baryshkov
@ 2023-02-08 16:43 ` Konrad Dybcio
-1 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-08 16:43 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: devicetree, linux-arm-msm, Abhinav Kumar, dri-devel, freedreno,
Sean Paul, linux-clk
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
> the GPU to function properly.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index df841230d1b7..5e744423a673 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -284,6 +284,14 @@ &gpi_dma1 {
> status = "okay";
> };
>
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + firmware-name = "qcom/sm8350/a660_zap.mbn";
> + };
> +};
> +
> &i2c15 {
> clock-frequency = <400000>;
> status = "okay";
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU
@ 2023-02-08 16:43 ` Konrad Dybcio
0 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2023-02-08 16:43 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Stephen Boyd,
Michael Turquette, Rob Herring, Krzysztof Kozlowski, Taniya Das
Cc: linux-arm-msm, linux-clk, devicetree, Rob Clark, Abhinav Kumar,
Sean Paul, dri-devel, freedreno, David Airlie, Daniel Vetter
On 6.02.2023 15:57, Dmitry Baryshkov wrote:
> Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
> the GPU to function properly.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index df841230d1b7..5e744423a673 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -284,6 +284,14 @@ &gpi_dma1 {
> status = "okay";
> };
>
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + firmware-name = "qcom/sm8350/a660_zap.mbn";
> + };
> +};
> +
> &i2c15 {
> clock-frequency = <400000>;
> status = "okay";
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
2023-02-06 14:57 ` Dmitry Baryshkov
@ 2023-02-09 3:28 ` Bjorn Andersson
-1 siblings, 0 replies; 34+ messages in thread
From: Bjorn Andersson @ 2023-02-09 3:28 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: devicetree, Stephen Boyd, linux-arm-msm, Michael Turquette,
Abhinav Kumar, Rob Herring, Taniya Das, Konrad Dybcio,
Andy Gross, dri-devel, Krzysztof Kozlowski, freedreno, Sean Paul,
linux-clk
On Mon, Feb 06, 2023 at 04:57:03PM +0200, Dmitry Baryshkov wrote:
> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
> position at the end of /soc/.
>
I think "according to agreed order" means "sorted by address", but it
would be nice to have that expressed in the message. If nothing else for
others to know what such agreed order might be.
Unfortunately this doesn't apply to my tree, and it's not clear where it
failed. Could you please rebase this?
Thanks,
Bjorn
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
> 1 file changed, 614 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 0de42a333d32..061aa3fec1c4 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
> };
> };
>
> - apps_smmu: iommu@15000000 {
> - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> - reg = <0 0x15000000 0 0x100000>;
> - #iommu-cells = <2>;
> - #global-interrupts = <2>;
> - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> @@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
> clock-names = "core";
> };
>
> - intc: interrupt-controller@17a00000 {
> - compatible = "arm,gic-v3";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - #redistributor-regions = <1>;
> - redistributor-stride = <0 0x20000>;
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - };
> + ufs_mem_hc: ufshc@1d84000 {
> + compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
>
> - timer@17c20000 {
> - compatible = "arm,armv7-timer-mem";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0 0 0x20000000>;
> - reg = <0x0 0x17c20000 0x0 0x1000>;
> - clock-frequency = <19200000>;
> + power-domains = <&gcc UFS_PHY_GDSC>;
>
> - frame@17c21000 {
> - frame-number = <0>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c21000 0x1000>,
> - <0x17c22000 0x1000>;
> - };
> + iommus = <&apps_smmu 0xe0 0x0>;
>
> - frame@17c23000 {
> - frame-number = <1>;
> - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c23000 0x1000>;
> - status = "disabled";
> - };
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
>
> - frame@17c25000 {
> - frame-number = <2>;
> - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c25000 0x1000>;
> - status = "disabled";
> - };
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sm8350-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0x1c4>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>
> - frame@17c27000 {
> - frame-number = <3>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c27000 0x1000>;
> - status = "disabled";
> - };
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
>
> - frame@17c29000 {
> - frame-number = <4>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c29000 0x1000>;
> - status = "disabled";
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x188>,
> + <0 0x01d87600 0 0x200>,
> + <0 0x01d87c00 0 0x200>,
> + <0 0x01d87800 0 0x188>,
> + <0 0x01d87a00 0 0x200>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> };
> + };
>
> - frame@17c2b000 {
> - frame-number = <5>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2b000 0x1000>;
> - status = "disabled";
> - };
> + slpi: remoteproc@5c00000 {
> + compatible = "qcom,sm8350-slpi-pas";
> + reg = <0 0x05c00000 0 0x4000>;
>
> - frame@17c2d000 {
> - frame-number = <6>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2d000 0x1000>;
> - status = "disabled";
> - };
> - };
> + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
>
> - apps_rsc: rsc@18200000 {
> - label = "apps_rsc";
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 0>;
> - power-domains = <&CLUSTER_PD>;
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm8350-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sm8350-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp10 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> - };
> -
> - cpufreq_hw: cpufreq@18591000 {
> - compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> - reg = <0 0x18591000 0 0x1000>,
> - <0 0x18592000 0 0x1000>,
> - <0 0x18593000 0 0x1000>;
> - reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> - clock-names = "xo", "alternate";
> -
> - #freq-domain-cells = <1>;
> - };
> -
> - ufs_mem_hc: ufshc@1d84000 {
> - compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> - "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>;
> - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> - phy-names = "ufsphy";
> - lanes-per-direction = <2>;
> - #reset-cells = <1>;
> - resets = <&gcc GCC_UFS_PHY_BCR>;
> - reset-names = "rst";
> -
> - power-domains = <&gcc UFS_PHY_GDSC>;
> -
> - iommus = <&apps_smmu 0xe0 0x0>;
> -
> - clock-names =
> - "core_clk",
> - "bus_aggr_clk",
> - "iface_clk",
> - "core_clk_unipro",
> - "ref_clk",
> - "tx_lane0_sync_clk",
> - "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk";
> - clocks =
> - <&gcc GCC_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_UFS_PHY_AHB_CLK>,
> - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> - status = "disabled";
> - };
> -
> - ufs_mem_phy: phy@1d87000 {
> - compatible = "qcom,sm8350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c4>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> -
> - resets = <&ufs_mem_hc 0>;
> - reset-names = "ufsphy";
> - status = "disabled";
> -
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x188>,
> - <0 0x01d87600 0 0x200>,
> - <0 0x01d87c00 0 0x200>,
> - <0 0x01d87800 0 0x188>,
> - <0 0x01d87a00 0 0x200>;
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - slpi: remoteproc@5c00000 {
> - compatible = "qcom,sm8350-slpi-pas";
> - reg = <0 0x05c00000 0 0x4000>;
> -
> - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
>
> power-domains = <&rpmhpd SM8350_LCX>,
> <&rpmhpd SM8350_LMX>;
> @@ -2427,176 +2161,67 @@ compute-cb@3 {
> };
> };
>
> - cdsp: remoteproc@98900000 {
> - compatible = "qcom,sm8350-cdsp-pas";
> - reg = <0 0x98900000 0 0x1400000>;
> -
> - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> + sdhc_2: mmc@8804000 {
> + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
>
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
>
> - power-domains = <&rpmhpd SM8350_CX>,
> - <&rpmhpd SM8350_MXC>;
> - power-domain-names = "cx", "mxc";
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "core", "xo";
> + resets = <&gcc GCC_SDCC2_BCR>;
> + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> + iommus = <&apps_smmu 0x4a0 0x0>;
> + power-domains = <&rpmhpd SM8350_CX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + bus-width = <4>;
> + dma-coherent;
>
> - interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> + status = "disabled";
>
> - memory-region = <&pil_cdsp_mem>;
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - qcom,qmp = <&aoss_qmp>;
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
>
> - qcom,smem-states = <&smp2p_cdsp_out 0>;
> - qcom,smem-state-names = "stop";
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
>
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8350-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> status = "disabled";
> + #phy-cells = <0>;
>
> - glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP
> - IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> - label = "cdsp";
> - qcom,remote-pid = <5>;
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
>
> - fastrpc {
> - compatible = "qcom,fastrpc";
> - qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "cdsp";
> - qcom,non-secure-domain;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + usb_2_hsphy: phy@88e4000 {
> + compatible = "qcom,sm8250-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e4000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
>
> - compute-cb@1 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <1>;
> - iommus = <&apps_smmu 0x2161 0x0400>,
> - <&apps_smmu 0x1181 0x0420>;
> - };
> -
> - compute-cb@2 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <2>;
> - iommus = <&apps_smmu 0x2162 0x0400>,
> - <&apps_smmu 0x1182 0x0420>;
> - };
> -
> - compute-cb@3 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <3>;
> - iommus = <&apps_smmu 0x2163 0x0400>,
> - <&apps_smmu 0x1183 0x0420>;
> - };
> -
> - compute-cb@4 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <4>;
> - iommus = <&apps_smmu 0x2164 0x0400>,
> - <&apps_smmu 0x1184 0x0420>;
> - };
> -
> - compute-cb@5 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <5>;
> - iommus = <&apps_smmu 0x2165 0x0400>,
> - <&apps_smmu 0x1185 0x0420>;
> - };
> -
> - compute-cb@6 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <6>;
> - iommus = <&apps_smmu 0x2166 0x0400>,
> - <&apps_smmu 0x1186 0x0420>;
> - };
> -
> - compute-cb@7 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <7>;
> - iommus = <&apps_smmu 0x2167 0x0400>,
> - <&apps_smmu 0x1187 0x0420>;
> - };
> -
> - compute-cb@8 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <8>;
> - iommus = <&apps_smmu 0x2168 0x0400>,
> - <&apps_smmu 0x1188 0x0420>;
> - };
> -
> - /* note: secure cb9 in downstream */
> - };
> - };
> - };
> -
> - sdhc_2: mmc@8804000 {
> - compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> - reg = <0 0x08804000 0 0x1000>;
> -
> - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "hc_irq", "pwr_irq";
> -
> - clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> - <&gcc GCC_SDCC2_APPS_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "core", "xo";
> - resets = <&gcc GCC_SDCC2_BCR>;
> - interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> - interconnect-names = "sdhc-ddr","cpu-sdhc";
> - iommus = <&apps_smmu 0x4a0 0x0>;
> - power-domains = <&rpmhpd SM8350_CX>;
> - operating-points-v2 = <&sdhc2_opp_table>;
> - bus-width = <4>;
> - dma-coherent;
> -
> - status = "disabled";
> -
> - sdhc2_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - };
> -
> - opp-202000000 {
> - opp-hz = /bits/ 64 <202000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> - };
> - };
> - };
> -
> - usb_1_hsphy: phy@88e3000 {
> - compatible = "qcom,sm8350-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e3000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> -
> - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> - };
> -
> - usb_2_hsphy: phy@88e4000 {
> - compatible = "qcom,sm8250-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e4000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> };
> @@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
> status = "disabled";
> };
>
> - mdss_dsi1: dsi@ae96000 {
> - compatible = "qcom,mdss-dsi-ctrl";
> - reg = <0 0x0ae96000 0 0x400>;
> - reg-names = "dsi_ctrl";
> + mdss_dsi1: dsi@ae96000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae96000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <5>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>;
> +
> + operating-points-v2 = <&dsi1_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + phys = <&mdss_dsi1_phy>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + dsi1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + /* TODO: opp-187500000 should work with
> + * &rpmhpd_opp_low_svs, but one some of
> + * sm8350_hdk boards reboot using this
> + * opp.
> + */
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dsi1_in: endpoint {
> + remote-endpoint = <&dpu_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + mdss_dsi1_phy: phy@ae96400 {
> + compatible = "qcom,sm8350-dsi-phy-5nm";
> + reg = <0 0x0ae96400 0 0x200>,
> + <0 0x0ae96600 0 0x280>,
> + <0 0x0ae96900 0 0x27c>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> + };
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm8350-dispcc";
> + reg = <0 0x0af00000 0 0x10000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> + <0>,
> + <0>;
> + clock-names = "bi_tcxo",
> + "dsi0_phy_pll_out_byteclk",
> + "dsi0_phy_pll_out_dsiclk",
> + "dsi1_phy_pll_out_byteclk",
> + "dsi1_phy_pll_out_dsiclk",
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> +
> + power-domains = <&rpmhpd SM8350_MMCX>;
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> + reg = <0 0x15000000 0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + adsp: remoteproc@17300000 {
> + compatible = "qcom,sm8350-adsp-pas";
> + reg = <0 0x17300000 0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd SM8350_LCX>,
> + <&rpmhpd SM8350_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x1803 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x1804 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x1805 0x0>;
> + };
> + };
> + };
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0 0x20000>;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0x20000000>;
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c23000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c25000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c27000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c29000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2b000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2d000 0x1000>;
> + status = "disabled";
> + };
> + };
>
> - interrupt-parent = <&mdss>;
> - interrupts = <5>;
> + apps_rsc: rsc@18200000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
> + power-domains = <&CLUSTER_PD>;
>
> - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> - <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> - <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&gcc GCC_DISP_HF_AXI_CLK>;
> - clock-names = "byte",
> - "byte_intf",
> - "pixel",
> - "core",
> - "iface",
> - "bus";
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8350-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
>
> - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> - assigned-clock-parents = <&mdss_dsi1_phy 0>,
> - <&mdss_dsi1_phy 1>;
> + rpmhpd: power-controller {
> + compatible = "qcom,sm8350-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
>
> - operating-points-v2 = <&dsi1_opp_table>;
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - phys = <&mdss_dsi1_phy>;
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
>
> - status = "disabled";
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
>
> - dsi1_opp_table: opp-table {
> - compatible = "operating-points-v2";
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
>
> - /* TODO: opp-187500000 should work with
> - * &rpmhpd_opp_low_svs, but one some of
> - * sm8350_hdk boards reboot using this
> - * opp.
> - */
> - opp-187500000 {
> - opp-hz = /bits/ 64 <187500000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> };
>
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> };
>
> - opp-358000000 {
> - opp-hz = /bits/ 64 <358000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> };
> - };
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
>
> - port@0 {
> - reg = <0>;
> - mdss_dsi1_in: endpoint {
> - remote-endpoint = <&dpu_intf2_out>;
> - };
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> };
>
> - port@1 {
> - reg = <1>;
> - mdss_dsi1_out: endpoint {
> - };
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> };
> };
> };
>
> - mdss_dsi1_phy: phy@ae96400 {
> - compatible = "qcom,sm8350-dsi-phy-5nm";
> - reg = <0 0x0ae96400 0 0x200>,
> - <0 0x0ae96600 0 0x280>,
> - <0 0x0ae96900 0 0x27c>;
> - reg-names = "dsi_phy",
> - "dsi_phy_lane",
> - "dsi_pll";
> -
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> -
> - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "ref";
> -
> - status = "disabled";
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> };
> };
>
> - dispcc: clock-controller@af00000 {
> - compatible = "qcom,sm8350-dispcc";
> - reg = <0 0x0af00000 0 0x10000>;
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> - <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> - <0>,
> - <0>;
> - clock-names = "bi_tcxo",
> - "dsi0_phy_pll_out_byteclk",
> - "dsi0_phy_pll_out_dsiclk",
> - "dsi1_phy_pll_out_byteclk",
> - "dsi1_phy_pll_out_dsiclk",
> - "dp_phy_pll_link_clk",
> - "dp_phy_pll_vco_div_clk";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> + reg = <0 0x18591000 0 0x1000>,
> + <0 0x18592000 0 0x1000>,
> + <0 0x18593000 0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
>
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> };
>
> - adsp: remoteproc@17300000 {
> - compatible = "qcom,sm8350-adsp-pas";
> - reg = <0 0x17300000 0 0x100>;
> + cdsp: remoteproc@98900000 {
> + compatible = "qcom,sm8350-cdsp-pas";
> + reg = <0 0x98900000 0 0x1400000>;
>
> - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "wdog", "fatal", "ready",
> "handover", "stop-ack";
>
> clocks = <&rpmhcc RPMH_CXO_CLK>;
> clock-names = "xo";
>
> - power-domains = <&rpmhpd SM8350_LCX>,
> - <&rpmhpd SM8350_LMX>;
> - power-domain-names = "lcx", "lmx";
> + power-domains = <&rpmhpd SM8350_CX>,
> + <&rpmhpd SM8350_MXC>;
> + power-domain-names = "cx", "mxc";
>
> - memory-region = <&pil_adsp_mem>;
> + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp_mem>;
>
> qcom,qmp = <&aoss_qmp>;
>
> - qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-states = <&smp2p_cdsp_out 0>;
> qcom,smem-state-names = "stop";
>
> status = "disabled";
>
> glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_LPASS
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP>;
>
> - label = "lpass";
> - qcom,remote-pid = <2>;
> + label = "cdsp";
> + qcom,remote-pid = <5>;
>
> fastrpc {
> compatible = "qcom,fastrpc";
> qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "adsp";
> + label = "cdsp";
> qcom,non-secure-domain;
> #address-cells = <1>;
> #size-cells = <0>;
>
> + compute-cb@1 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x2161 0x0400>,
> + <&apps_smmu 0x1181 0x0420>;
> + };
> +
> + compute-cb@2 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x2162 0x0400>,
> + <&apps_smmu 0x1182 0x0420>;
> + };
> +
> compute-cb@3 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <3>;
> - iommus = <&apps_smmu 0x1803 0x0>;
> + iommus = <&apps_smmu 0x2163 0x0400>,
> + <&apps_smmu 0x1183 0x0420>;
> };
>
> compute-cb@4 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <4>;
> - iommus = <&apps_smmu 0x1804 0x0>;
> + iommus = <&apps_smmu 0x2164 0x0400>,
> + <&apps_smmu 0x1184 0x0420>;
> };
>
> compute-cb@5 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <5>;
> - iommus = <&apps_smmu 0x1805 0x0>;
> + iommus = <&apps_smmu 0x2165 0x0400>,
> + <&apps_smmu 0x1185 0x0420>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x2166 0x0400>,
> + <&apps_smmu 0x1186 0x0420>;
> };
> +
> + compute-cb@7 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <7>;
> + iommus = <&apps_smmu 0x2167 0x0400>,
> + <&apps_smmu 0x1187 0x0420>;
> + };
> +
> + compute-cb@8 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <8>;
> + iommus = <&apps_smmu 0x2168 0x0400>,
> + <&apps_smmu 0x1188 0x0420>;
> + };
> +
> + /* note: secure cb9 in downstream */
> };
> };
> };
> --
> 2.39.1
>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
@ 2023-02-09 3:28 ` Bjorn Andersson
0 siblings, 0 replies; 34+ messages in thread
From: Bjorn Andersson @ 2023-02-09 3:28 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Andy Gross, Konrad Dybcio, Stephen Boyd, Michael Turquette,
Rob Herring, Krzysztof Kozlowski, Taniya Das, linux-arm-msm,
linux-clk, devicetree, Rob Clark, Abhinav Kumar, Sean Paul,
dri-devel, freedreno, David Airlie, Daniel Vetter
On Mon, Feb 06, 2023 at 04:57:03PM +0200, Dmitry Baryshkov wrote:
> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
> position at the end of /soc/.
>
I think "according to agreed order" means "sorted by address", but it
would be nice to have that expressed in the message. If nothing else for
others to know what such agreed order might be.
Unfortunately this doesn't apply to my tree, and it's not clear where it
failed. Could you please rebase this?
Thanks,
Bjorn
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1228 +++++++++++++-------------
> 1 file changed, 614 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 0de42a333d32..061aa3fec1c4 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1423,111 +1423,6 @@ spi13: spi@a94000 {
> };
> };
>
> - apps_smmu: iommu@15000000 {
> - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> - reg = <0 0x15000000 0 0x100000>;
> - #iommu-cells = <2>;
> - #global-interrupts = <2>;
> - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> @@ -2126,253 +2021,92 @@ rng: rng@10d3000 {
> clock-names = "core";
> };
>
> - intc: interrupt-controller@17a00000 {
> - compatible = "arm,gic-v3";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - #redistributor-regions = <1>;
> - redistributor-stride = <0 0x20000>;
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - };
> + ufs_mem_hc: ufshc@1d84000 {
> + compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
>
> - timer@17c20000 {
> - compatible = "arm,armv7-timer-mem";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0 0 0x20000000>;
> - reg = <0x0 0x17c20000 0x0 0x1000>;
> - clock-frequency = <19200000>;
> + power-domains = <&gcc UFS_PHY_GDSC>;
>
> - frame@17c21000 {
> - frame-number = <0>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c21000 0x1000>,
> - <0x17c22000 0x1000>;
> - };
> + iommus = <&apps_smmu 0xe0 0x0>;
>
> - frame@17c23000 {
> - frame-number = <1>;
> - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c23000 0x1000>;
> - status = "disabled";
> - };
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
>
> - frame@17c25000 {
> - frame-number = <2>;
> - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c25000 0x1000>;
> - status = "disabled";
> - };
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sm8350-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0x1c4>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>
> - frame@17c27000 {
> - frame-number = <3>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c27000 0x1000>;
> - status = "disabled";
> - };
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
>
> - frame@17c29000 {
> - frame-number = <4>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c29000 0x1000>;
> - status = "disabled";
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x188>,
> + <0 0x01d87600 0 0x200>,
> + <0 0x01d87c00 0 0x200>,
> + <0 0x01d87800 0 0x188>,
> + <0 0x01d87a00 0 0x200>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> };
> + };
>
> - frame@17c2b000 {
> - frame-number = <5>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2b000 0x1000>;
> - status = "disabled";
> - };
> + slpi: remoteproc@5c00000 {
> + compatible = "qcom,sm8350-slpi-pas";
> + reg = <0 0x05c00000 0 0x4000>;
>
> - frame@17c2d000 {
> - frame-number = <6>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x17c2d000 0x1000>;
> - status = "disabled";
> - };
> - };
> + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
>
> - apps_rsc: rsc@18200000 {
> - label = "apps_rsc";
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 0>;
> - power-domains = <&CLUSTER_PD>;
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm8350-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sm8350-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp10 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> - };
> -
> - cpufreq_hw: cpufreq@18591000 {
> - compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> - reg = <0 0x18591000 0 0x1000>,
> - <0 0x18592000 0 0x1000>,
> - <0 0x18593000 0 0x1000>;
> - reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> - clock-names = "xo", "alternate";
> -
> - #freq-domain-cells = <1>;
> - };
> -
> - ufs_mem_hc: ufshc@1d84000 {
> - compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> - "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>;
> - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> - phy-names = "ufsphy";
> - lanes-per-direction = <2>;
> - #reset-cells = <1>;
> - resets = <&gcc GCC_UFS_PHY_BCR>;
> - reset-names = "rst";
> -
> - power-domains = <&gcc UFS_PHY_GDSC>;
> -
> - iommus = <&apps_smmu 0xe0 0x0>;
> -
> - clock-names =
> - "core_clk",
> - "bus_aggr_clk",
> - "iface_clk",
> - "core_clk_unipro",
> - "ref_clk",
> - "tx_lane0_sync_clk",
> - "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk";
> - clocks =
> - <&gcc GCC_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_UFS_PHY_AHB_CLK>,
> - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> - status = "disabled";
> - };
> -
> - ufs_mem_phy: phy@1d87000 {
> - compatible = "qcom,sm8350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c4>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> -
> - resets = <&ufs_mem_hc 0>;
> - reset-names = "ufsphy";
> - status = "disabled";
> -
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x188>,
> - <0 0x01d87600 0 0x200>,
> - <0 0x01d87c00 0 0x200>,
> - <0 0x01d87800 0 0x188>,
> - <0 0x01d87a00 0 0x200>;
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - slpi: remoteproc@5c00000 {
> - compatible = "qcom,sm8350-slpi-pas";
> - reg = <0 0x05c00000 0 0x4000>;
> -
> - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
>
> power-domains = <&rpmhpd SM8350_LCX>,
> <&rpmhpd SM8350_LMX>;
> @@ -2427,176 +2161,67 @@ compute-cb@3 {
> };
> };
>
> - cdsp: remoteproc@98900000 {
> - compatible = "qcom,sm8350-cdsp-pas";
> - reg = <0 0x98900000 0 0x1400000>;
> -
> - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> + sdhc_2: mmc@8804000 {
> + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
>
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
>
> - power-domains = <&rpmhpd SM8350_CX>,
> - <&rpmhpd SM8350_MXC>;
> - power-domain-names = "cx", "mxc";
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "core", "xo";
> + resets = <&gcc GCC_SDCC2_BCR>;
> + interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> + iommus = <&apps_smmu 0x4a0 0x0>;
> + power-domains = <&rpmhpd SM8350_CX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + bus-width = <4>;
> + dma-coherent;
>
> - interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> + status = "disabled";
>
> - memory-region = <&pil_cdsp_mem>;
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - qcom,qmp = <&aoss_qmp>;
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
>
> - qcom,smem-states = <&smp2p_cdsp_out 0>;
> - qcom,smem-state-names = "stop";
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
>
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8350-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e3000 0 0x400>;
> status = "disabled";
> + #phy-cells = <0>;
>
> - glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP
> - IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_CDSP
> - IPCC_MPROC_SIGNAL_GLINK_QMP>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> - label = "cdsp";
> - qcom,remote-pid = <5>;
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
>
> - fastrpc {
> - compatible = "qcom,fastrpc";
> - qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "cdsp";
> - qcom,non-secure-domain;
> - #address-cells = <1>;
> - #size-cells = <0>;
> + usb_2_hsphy: phy@88e4000 {
> + compatible = "qcom,sm8250-usb-hs-phy",
> + "qcom,usb-snps-hs-7nm-phy";
> + reg = <0 0x088e4000 0 0x400>;
> + status = "disabled";
> + #phy-cells = <0>;
>
> - compute-cb@1 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <1>;
> - iommus = <&apps_smmu 0x2161 0x0400>,
> - <&apps_smmu 0x1181 0x0420>;
> - };
> -
> - compute-cb@2 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <2>;
> - iommus = <&apps_smmu 0x2162 0x0400>,
> - <&apps_smmu 0x1182 0x0420>;
> - };
> -
> - compute-cb@3 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <3>;
> - iommus = <&apps_smmu 0x2163 0x0400>,
> - <&apps_smmu 0x1183 0x0420>;
> - };
> -
> - compute-cb@4 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <4>;
> - iommus = <&apps_smmu 0x2164 0x0400>,
> - <&apps_smmu 0x1184 0x0420>;
> - };
> -
> - compute-cb@5 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <5>;
> - iommus = <&apps_smmu 0x2165 0x0400>,
> - <&apps_smmu 0x1185 0x0420>;
> - };
> -
> - compute-cb@6 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <6>;
> - iommus = <&apps_smmu 0x2166 0x0400>,
> - <&apps_smmu 0x1186 0x0420>;
> - };
> -
> - compute-cb@7 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <7>;
> - iommus = <&apps_smmu 0x2167 0x0400>,
> - <&apps_smmu 0x1187 0x0420>;
> - };
> -
> - compute-cb@8 {
> - compatible = "qcom,fastrpc-compute-cb";
> - reg = <8>;
> - iommus = <&apps_smmu 0x2168 0x0400>,
> - <&apps_smmu 0x1188 0x0420>;
> - };
> -
> - /* note: secure cb9 in downstream */
> - };
> - };
> - };
> -
> - sdhc_2: mmc@8804000 {
> - compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> - reg = <0 0x08804000 0 0x1000>;
> -
> - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "hc_irq", "pwr_irq";
> -
> - clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> - <&gcc GCC_SDCC2_APPS_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "core", "xo";
> - resets = <&gcc GCC_SDCC2_BCR>;
> - interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> - interconnect-names = "sdhc-ddr","cpu-sdhc";
> - iommus = <&apps_smmu 0x4a0 0x0>;
> - power-domains = <&rpmhpd SM8350_CX>;
> - operating-points-v2 = <&sdhc2_opp_table>;
> - bus-width = <4>;
> - dma-coherent;
> -
> - status = "disabled";
> -
> - sdhc2_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - };
> -
> - opp-202000000 {
> - opp-hz = /bits/ 64 <202000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> - };
> - };
> - };
> -
> - usb_1_hsphy: phy@88e3000 {
> - compatible = "qcom,sm8350-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e3000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> -
> - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> - };
> -
> - usb_2_hsphy: phy@88e4000 {
> - compatible = "qcom,sm8250-usb-hs-phy",
> - "qcom,usb-snps-hs-7nm-phy";
> - reg = <0 0x088e4000 0 0x400>;
> - status = "disabled";
> - #phy-cells = <0>;
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "ref";
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "ref";
>
> resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> };
> @@ -2987,190 +2612,565 @@ mdss_dsi0_phy: phy@ae94400 {
> status = "disabled";
> };
>
> - mdss_dsi1: dsi@ae96000 {
> - compatible = "qcom,mdss-dsi-ctrl";
> - reg = <0 0x0ae96000 0 0x400>;
> - reg-names = "dsi_ctrl";
> + mdss_dsi1: dsi@ae96000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae96000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <5>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>;
> +
> + operating-points-v2 = <&dsi1_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + phys = <&mdss_dsi1_phy>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + dsi1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + /* TODO: opp-187500000 should work with
> + * &rpmhpd_opp_low_svs, but one some of
> + * sm8350_hdk boards reboot using this
> + * opp.
> + */
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dsi1_in: endpoint {
> + remote-endpoint = <&dpu_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + mdss_dsi1_phy: phy@ae96400 {
> + compatible = "qcom,sm8350-dsi-phy-5nm";
> + reg = <0 0x0ae96400 0 0x200>,
> + <0 0x0ae96600 0 0x280>,
> + <0 0x0ae96900 0 0x27c>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> + };
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm8350-dispcc";
> + reg = <0 0x0af00000 0 0x10000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> + <0>,
> + <0>;
> + clock-names = "bi_tcxo",
> + "dsi0_phy_pll_out_byteclk",
> + "dsi0_phy_pll_out_dsiclk",
> + "dsi1_phy_pll_out_byteclk",
> + "dsi1_phy_pll_out_dsiclk",
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> +
> + power-domains = <&rpmhpd SM8350_MMCX>;
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
> + reg = <0 0x15000000 0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + adsp: remoteproc@17300000 {
> + compatible = "qcom,sm8350-adsp-pas";
> + reg = <0 0x17300000 0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd SM8350_LCX>,
> + <&rpmhpd SM8350_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x1803 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x1804 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x1805 0x0>;
> + };
> + };
> + };
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0 0x20000>;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0x20000000>;
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c23000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c25000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c27000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c29000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2b000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2d000 0x1000>;
> + status = "disabled";
> + };
> + };
>
> - interrupt-parent = <&mdss>;
> - interrupts = <5>;
> + apps_rsc: rsc@18200000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
> + power-domains = <&CLUSTER_PD>;
>
> - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> - <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> - <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&gcc GCC_DISP_HF_AXI_CLK>;
> - clock-names = "byte",
> - "byte_intf",
> - "pixel",
> - "core",
> - "iface",
> - "bus";
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8350-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
>
> - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> - <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> - assigned-clock-parents = <&mdss_dsi1_phy 0>,
> - <&mdss_dsi1_phy 1>;
> + rpmhpd: power-controller {
> + compatible = "qcom,sm8350-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
>
> - operating-points-v2 = <&dsi1_opp_table>;
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
>
> - phys = <&mdss_dsi1_phy>;
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
>
> - status = "disabled";
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
>
> - dsi1_opp_table: opp-table {
> - compatible = "operating-points-v2";
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
>
> - /* TODO: opp-187500000 should work with
> - * &rpmhpd_opp_low_svs, but one some of
> - * sm8350_hdk boards reboot using this
> - * opp.
> - */
> - opp-187500000 {
> - opp-hz = /bits/ 64 <187500000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> };
>
> - opp-300000000 {
> - opp-hz = /bits/ 64 <300000000>;
> - required-opps = <&rpmhpd_opp_svs>;
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> };
>
> - opp-358000000 {
> - opp-hz = /bits/ 64 <358000000>;
> - required-opps = <&rpmhpd_opp_svs_l1>;
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> };
> - };
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
>
> - port@0 {
> - reg = <0>;
> - mdss_dsi1_in: endpoint {
> - remote-endpoint = <&dpu_intf2_out>;
> - };
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> };
>
> - port@1 {
> - reg = <1>;
> - mdss_dsi1_out: endpoint {
> - };
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> };
> };
> };
>
> - mdss_dsi1_phy: phy@ae96400 {
> - compatible = "qcom,sm8350-dsi-phy-5nm";
> - reg = <0 0x0ae96400 0 0x200>,
> - <0 0x0ae96600 0 0x280>,
> - <0 0x0ae96900 0 0x27c>;
> - reg-names = "dsi_phy",
> - "dsi_phy_lane",
> - "dsi_pll";
> -
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> -
> - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "ref";
> -
> - status = "disabled";
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> };
> };
>
> - dispcc: clock-controller@af00000 {
> - compatible = "qcom,sm8350-dispcc";
> - reg = <0 0x0af00000 0 0x10000>;
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
> - <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> - <0>,
> - <0>;
> - clock-names = "bi_tcxo",
> - "dsi0_phy_pll_out_byteclk",
> - "dsi0_phy_pll_out_dsiclk",
> - "dsi1_phy_pll_out_byteclk",
> - "dsi1_phy_pll_out_dsiclk",
> - "dp_phy_pll_link_clk",
> - "dp_phy_pll_vco_div_clk";
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
> + reg = <0 0x18591000 0 0x1000>,
> + <0 0x18592000 0 0x1000>,
> + <0 0x18593000 0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
>
> - power-domains = <&rpmhpd SM8350_MMCX>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> };
>
> - adsp: remoteproc@17300000 {
> - compatible = "qcom,sm8350-adsp-pas";
> - reg = <0 0x17300000 0 0x100>;
> + cdsp: remoteproc@98900000 {
> + compatible = "qcom,sm8350-cdsp-pas";
> + reg = <0 0x98900000 0 0x1400000>;
>
> - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "wdog", "fatal", "ready",
> "handover", "stop-ack";
>
> clocks = <&rpmhcc RPMH_CXO_CLK>;
> clock-names = "xo";
>
> - power-domains = <&rpmhpd SM8350_LCX>,
> - <&rpmhpd SM8350_LMX>;
> - power-domain-names = "lcx", "lmx";
> + power-domains = <&rpmhpd SM8350_CX>,
> + <&rpmhpd SM8350_MXC>;
> + power-domain-names = "cx", "mxc";
>
> - memory-region = <&pil_adsp_mem>;
> + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
> +
> + memory-region = <&pil_cdsp_mem>;
>
> qcom,qmp = <&aoss_qmp>;
>
> - qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-states = <&smp2p_cdsp_out 0>;
> qcom,smem-state-names = "stop";
>
> status = "disabled";
>
> glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_LPASS
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> IPCC_MPROC_SIGNAL_GLINK_QMP>;
>
> - label = "lpass";
> - qcom,remote-pid = <2>;
> + label = "cdsp";
> + qcom,remote-pid = <5>;
>
> fastrpc {
> compatible = "qcom,fastrpc";
> qcom,glink-channels = "fastrpcglink-apps-dsp";
> - label = "adsp";
> + label = "cdsp";
> qcom,non-secure-domain;
> #address-cells = <1>;
> #size-cells = <0>;
>
> + compute-cb@1 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x2161 0x0400>,
> + <&apps_smmu 0x1181 0x0420>;
> + };
> +
> + compute-cb@2 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x2162 0x0400>,
> + <&apps_smmu 0x1182 0x0420>;
> + };
> +
> compute-cb@3 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <3>;
> - iommus = <&apps_smmu 0x1803 0x0>;
> + iommus = <&apps_smmu 0x2163 0x0400>,
> + <&apps_smmu 0x1183 0x0420>;
> };
>
> compute-cb@4 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <4>;
> - iommus = <&apps_smmu 0x1804 0x0>;
> + iommus = <&apps_smmu 0x2164 0x0400>,
> + <&apps_smmu 0x1184 0x0420>;
> };
>
> compute-cb@5 {
> compatible = "qcom,fastrpc-compute-cb";
> reg = <5>;
> - iommus = <&apps_smmu 0x1805 0x0>;
> + iommus = <&apps_smmu 0x2165 0x0400>,
> + <&apps_smmu 0x1185 0x0420>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x2166 0x0400>,
> + <&apps_smmu 0x1186 0x0420>;
> };
> +
> + compute-cb@7 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <7>;
> + iommus = <&apps_smmu 0x2167 0x0400>,
> + <&apps_smmu 0x1187 0x0420>;
> + };
> +
> + compute-cb@8 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <8>;
> + iommus = <&apps_smmu 0x2168 0x0400>,
> + <&apps_smmu 0x1188 0x0420>;
> + };
> +
> + /* note: secure cb9 in downstream */
> };
> };
> };
> --
> 2.39.1
>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board
2023-02-06 14:56 ` Dmitry Baryshkov
@ 2023-02-09 4:22 ` Bjorn Andersson
-1 siblings, 0 replies; 34+ messages in thread
From: Bjorn Andersson @ 2023-02-09 4:22 UTC (permalink / raw)
To: Andy Gross, Dmitry Baryshkov, Rob Herring, Konrad Dybcio,
Krzysztof Kozlowski, Michael Turquette, Stephen Boyd, Taniya Das
Cc: devicetree, Abhinav Kumar, dri-devel, linux-arm-msm, freedreno,
Sean Paul, linux-clk
On Mon, 6 Feb 2023 16:56:59 +0200, Dmitry Baryshkov wrote:
> Add A660 device to the Qualcomm SM8350 platform and enable it for the
> sm8350-hdk board. Unfortunately while adding the GPU & related devices I
> noticed that DT nodes on SM8350 are greatly out of the preagreed order,
> so patches 4-6 reorder DT nodes to follow the agreement.
>
> Changes since v1:
> - Fixed the subject and commit message for patch 1
> - Fixed GMU's clocks to follow the vendor kernel
> - Marked Adreno SMMU as dma-coherent
> - Dropped comments targeting sm8350 v1, we do not support that chip
> revision.
>
> [...]
Applied, thanks!
[2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
commit: bdd133c2eeffad142e7c8a48ab7e86e1ca37e67d
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board
@ 2023-02-09 4:22 ` Bjorn Andersson
0 siblings, 0 replies; 34+ messages in thread
From: Bjorn Andersson @ 2023-02-09 4:22 UTC (permalink / raw)
To: Andy Gross, Dmitry Baryshkov, Rob Herring, Konrad Dybcio,
Krzysztof Kozlowski, Michael Turquette, Stephen Boyd, Taniya Das
Cc: Rob Clark, David Airlie, dri-devel, Abhinav Kumar, Sean Paul,
Daniel Vetter, devicetree, linux-clk, freedreno, linux-arm-msm
On Mon, 6 Feb 2023 16:56:59 +0200, Dmitry Baryshkov wrote:
> Add A660 device to the Qualcomm SM8350 platform and enable it for the
> sm8350-hdk board. Unfortunately while adding the GPU & related devices I
> noticed that DT nodes on SM8350 are greatly out of the preagreed order,
> so patches 4-6 reorder DT nodes to follow the agreement.
>
> Changes since v1:
> - Fixed the subject and commit message for patch 1
> - Fixed GMU's clocks to follow the vendor kernel
> - Marked Adreno SMMU as dma-coherent
> - Dropped comments targeting sm8350 v1, we do not support that chip
> revision.
>
> [...]
Applied, thanks!
[2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
commit: bdd133c2eeffad142e7c8a48ab7e86e1ca37e67d
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
2023-02-09 3:28 ` Bjorn Andersson
@ 2023-02-09 13:40 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-09 13:40 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Stephen Boyd, Michael Turquette,
Rob Herring, Krzysztof Kozlowski, Taniya Das, linux-arm-msm,
linux-clk, devicetree, Rob Clark, Abhinav Kumar, Sean Paul,
dri-devel, freedreno, David Airlie, Daniel Vetter
On 09/02/2023 05:28, Bjorn Andersson wrote:
> On Mon, Feb 06, 2023 at 04:57:03PM +0200, Dmitry Baryshkov wrote:
>> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
>> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
>> position at the end of /soc/.
>>
>
> I think "according to agreed order" means "sorted by address", but it
> would be nice to have that expressed in the message. If nothing else for
> others to know what such agreed order might be.
>
>
> Unfortunately this doesn't apply to my tree, and it's not clear where it
> failed. Could you please rebase this?
Done
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes
@ 2023-02-09 13:40 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2023-02-09 13:40 UTC (permalink / raw)
To: Bjorn Andersson
Cc: devicetree, Stephen Boyd, linux-arm-msm, Michael Turquette,
Abhinav Kumar, Rob Herring, Taniya Das, Konrad Dybcio,
Andy Gross, dri-devel, Krzysztof Kozlowski, freedreno, Sean Paul,
linux-clk
On 09/02/2023 05:28, Bjorn Andersson wrote:
> On Mon, Feb 06, 2023 at 04:57:03PM +0200, Dmitry Baryshkov wrote:
>> Start ordering DT nodes according to agreed order. Move apps SMMU, GIC,
>> timer, apps RSC, cpufreq ADSP and cDSP nodes to the end to the proper
>> position at the end of /soc/.
>>
>
> I think "according to agreed order" means "sorted by address", but it
> would be nice to have that expressed in the message. If nothing else for
> others to know what such agreed order might be.
>
>
> Unfortunately this doesn't apply to my tree, and it's not clear where it
> failed. Could you please rebase this?
Done
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2023-02-09 13:40 UTC | newest]
Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-06 14:56 [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Dmitry Baryshkov
2023-02-06 14:56 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom, gpucc-sm8350 into qcom, gpucc.yaml Dmitry Baryshkov
2023-02-07 20:40 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Rob Herring
2023-02-07 20:40 ` Rob Herring
2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom, rpmpd: " Dmitry Baryshkov
2023-02-06 20:19 ` [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: " Konrad Dybcio
2023-02-06 20:19 ` Konrad Dybcio
2023-02-06 14:57 ` [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-07 20:41 ` Rob Herring
2023-02-07 20:41 ` Rob Herring
2023-02-06 14:57 ` [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-08 9:22 ` Konrad Dybcio
2023-02-08 9:22 ` Konrad Dybcio
2023-02-09 3:28 ` Bjorn Andersson
2023-02-09 3:28 ` Bjorn Andersson
2023-02-09 13:40 ` Dmitry Baryshkov
2023-02-09 13:40 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 6/8] arm64: dts: qcom: sm8350: finish reordering nodes Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov
2023-02-08 16:43 ` Konrad Dybcio
2023-02-08 16:43 ` Konrad Dybcio
2023-02-09 4:22 ` (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Bjorn Andersson
2023-02-09 4:22 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.