All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Polimera <quic_vpolimer@quicinc.com>
To: <dri-devel@lists.freedesktop.org>,
	<linux-arm-msm@vger.kernel.org>,
	<freedreno@lists.freedesktop.org>, <devicetree@vger.kernel.org>
Cc: quic_kalyant@quicinc.com, quic_sbillaka@quicinc.com,
	quic_bjorande@quicinc.com, quic_abhinavk@quicinc.com,
	quic_vproddut@quicinc.com, quic_khsieh@quicinc.com,
	dianders@chromium.org, linux-kernel@vger.kernel.org,
	dmitry.baryshkov@linaro.org, swboyd@chromium.org,
	Vinod Polimera <quic_vpolimer@quicinc.com>
Subject: [PATCH v13 12/13] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
Date: Sun, 12 Feb 2023 21:58:56 +0530	[thread overview]
Message-ID: <1676219337-6526-13-git-send-email-quic_vpolimer@quicinc.com> (raw)
In-Reply-To: <1676219337-6526-1-git-send-email-quic_vpolimer@quicinc.com>

Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 13 ++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 14 ++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
 3 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index f29a339..60e5984 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -21,6 +21,7 @@
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_self_refresh_helper.h>
 
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
@@ -1021,6 +1022,9 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
 
+	if (old_crtc_state->self_refresh_active)
+		return;
+
 	/* Disable/save vblank irq handling */
 	drm_crtc_vblank_off(crtc);
 
@@ -1577,7 +1581,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 {
 	struct drm_crtc *crtc = NULL;
 	struct dpu_crtc *dpu_crtc = NULL;
-	int i;
+	int i, ret;
 
 	dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
 	if (!dpu_crtc)
@@ -1614,6 +1618,13 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 	/* initialize event handling */
 	spin_lock_init(&dpu_crtc->event_lock);
 
+	ret = drm_self_refresh_helper_init(crtc);
+	if (ret) {
+		DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
+			crtc->name, ret);
+		return ERR_PTR(ret);
+	}
+
 	DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
 	return crtc;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 01b7509..450abb1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -12,6 +12,7 @@
 #include <linux/kthread.h>
 #include <linux/seq_file.h>
 
+#include <drm/drm_atomic.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_file.h>
 #include <drm/drm_probe_helper.h>
@@ -1212,11 +1213,24 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
 					struct drm_atomic_state *state)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_state = NULL;
 	int i = 0;
 
 	dpu_enc = to_dpu_encoder_virt(drm_enc);
 	DPU_DEBUG_ENC(dpu_enc, "\n");
 
+	crtc = drm_atomic_get_old_crtc_for_encoder(state, drm_enc);
+	if (crtc)
+		old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * The encoder is already disabled if self refresh mode was set earlier,
+	 * in the old_state for the corresponding crtc.
+	 */
+	if (old_state && old_state->self_refresh_active)
+		return;
+
 	mutex_lock(&dpu_enc->enc_lock);
 	dpu_enc->enabled = false;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index a683bd9..681dd2e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -491,7 +491,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
 		return;
 	}
 
-	if (!crtc->state->active) {
+	if (!drm_atomic_crtc_effectively_active(crtc->state)) {
 		DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
 		return;
 	}
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Vinod Polimera <quic_vpolimer@quicinc.com>
To: <dri-devel@lists.freedesktop.org>,
	<linux-arm-msm@vger.kernel.org>,
	<freedreno@lists.freedesktop.org>, <devicetree@vger.kernel.org>
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>,
	<linux-kernel@vger.kernel.org>, <robdclark@gmail.com>,
	<dianders@chromium.org>, <swboyd@chromium.org>,
	<quic_kalyant@quicinc.com>, <dmitry.baryshkov@linaro.org>,
	<quic_khsieh@quicinc.com>, <quic_vproddut@quicinc.com>,
	<quic_bjorande@quicinc.com>, <quic_abhinavk@quicinc.com>,
	<quic_sbillaka@quicinc.com>
Subject: [PATCH v13 12/13] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
Date: Sun, 12 Feb 2023 21:58:56 +0530	[thread overview]
Message-ID: <1676219337-6526-13-git-send-email-quic_vpolimer@quicinc.com> (raw)
In-Reply-To: <1676219337-6526-1-git-send-email-quic_vpolimer@quicinc.com>

Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 13 ++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 14 ++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
 3 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index f29a339..60e5984 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -21,6 +21,7 @@
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_self_refresh_helper.h>
 
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
@@ -1021,6 +1022,9 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
 
+	if (old_crtc_state->self_refresh_active)
+		return;
+
 	/* Disable/save vblank irq handling */
 	drm_crtc_vblank_off(crtc);
 
@@ -1577,7 +1581,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 {
 	struct drm_crtc *crtc = NULL;
 	struct dpu_crtc *dpu_crtc = NULL;
-	int i;
+	int i, ret;
 
 	dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
 	if (!dpu_crtc)
@@ -1614,6 +1618,13 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 	/* initialize event handling */
 	spin_lock_init(&dpu_crtc->event_lock);
 
+	ret = drm_self_refresh_helper_init(crtc);
+	if (ret) {
+		DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
+			crtc->name, ret);
+		return ERR_PTR(ret);
+	}
+
 	DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
 	return crtc;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 01b7509..450abb1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -12,6 +12,7 @@
 #include <linux/kthread.h>
 #include <linux/seq_file.h>
 
+#include <drm/drm_atomic.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_file.h>
 #include <drm/drm_probe_helper.h>
@@ -1212,11 +1213,24 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
 					struct drm_atomic_state *state)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_state = NULL;
 	int i = 0;
 
 	dpu_enc = to_dpu_encoder_virt(drm_enc);
 	DPU_DEBUG_ENC(dpu_enc, "\n");
 
+	crtc = drm_atomic_get_old_crtc_for_encoder(state, drm_enc);
+	if (crtc)
+		old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * The encoder is already disabled if self refresh mode was set earlier,
+	 * in the old_state for the corresponding crtc.
+	 */
+	if (old_state && old_state->self_refresh_active)
+		return;
+
 	mutex_lock(&dpu_enc->enc_lock);
 	dpu_enc->enabled = false;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index a683bd9..681dd2e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -491,7 +491,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
 		return;
 	}
 
-	if (!crtc->state->active) {
+	if (!drm_atomic_crtc_effectively_active(crtc->state)) {
 		DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
 		return;
 	}
-- 
2.7.4


  parent reply	other threads:[~2023-02-12 16:30 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-12 16:28 [PATCH v13 00/13] Add PSR support for eDP Vinod Polimera
2023-02-12 16:28 ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 01/13] drm: add helper functions to retrieve old and new crtc Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 02/13] drm/bridge: use atomic enable/disable callbacks for panel bridge Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 03/13] drm/bridge: add psr support for panel bridge callbacks Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 04/13] drm/msm/disp/dpu: check for crtc enable rather than crtc active to release shared resources Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 05/13] drm/msm/disp/dpu: get timing engine status from intf status register Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 06/13] drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 07/13] drm/msm/disp/dpu: reset the datapath after timing engine disable Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 08/13] drm/msm/dp: use atomic callbacks for DP bridge ops Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 09/13] drm/msm/dp: Add basic PSR support for eDP Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 10/13] drm/msm/dp: use the eDP bridge ops to validate eDP modes Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 11/13] drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder functions Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-12 16:28 ` Vinod Polimera [this message]
2023-02-12 16:28   ` [PATCH v13 12/13] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver Vinod Polimera
2023-02-12 16:28 ` [PATCH v13 13/13] drm/msm/disp/dpu: update dpu_enc crtc state on crtc enable/disable during self refresh Vinod Polimera
2023-02-12 16:28   ` Vinod Polimera
2023-02-17 21:53   ` Dmitry Baryshkov
2023-02-17 21:53     ` Dmitry Baryshkov
2023-03-01 19:06 ` [PATCH v13 00/13] Add PSR support for eDP Doug Anderson
2023-03-01 19:06   ` Doug Anderson
2023-03-01 20:32   ` Doug Anderson
2023-03-01 20:32     ` Doug Anderson
2023-03-02 16:38     ` Vinod Polimera
2023-03-02 16:38       ` Vinod Polimera
2023-03-01 20:34   ` Dmitry Baryshkov
2023-03-01 20:34     ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1676219337-6526-13-git-send-email-quic_vpolimer@quicinc.com \
    --to=quic_vpolimer@quicinc.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_bjorande@quicinc.com \
    --cc=quic_kalyant@quicinc.com \
    --cc=quic_khsieh@quicinc.com \
    --cc=quic_sbillaka@quicinc.com \
    --cc=quic_vproddut@quicinc.com \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.