* [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel, Max Fierke The ClockworkPi DevTerm (all models) uses a 6.86" IPS display of unknown provenance, which uses the Chipone ICNL9707 IC driver[1]. The display panel I have has two model numbers: TXW686001 and WTL068601G, but cannot find any manufacturer associated with either, so opting for the ClockworkPi model number. This driver is based on the GPL-licensed driver released by ClockworkPi[1], authored by Pinfan Zhu, with some additional cleanup, rotation support, and display sleep re-enabling done by me. [1] https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf [2] https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch Thanks to Krzysztof Kozlowski, Rob Herring, and Sam Ravnborg for their prior reviews and apologies for the long delay between patch set versions. Changes in v2: - dt-bindings: remove redundant backlight example - add missing regulators - remove some unused properties from definition (e.g. enable_gpio, supply) - reorder includes - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight - remove now-unneeded ctx->enabled and enable/disable hooks - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq - use dev_err_probe instead of checking EPROBE_DEFER - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver - add .get_orientation callback Max Fierke (4): dt-bindings: vendor-prefixes: Add prefix for ClockworkPi dt-bindings: display: Add ClockworkPi CWD686 panel drm: panel: Add driver for ClockworkPi cwd686 panel drm/panel: clockworkpi-cwd686: Implement .get_orientation callback .../display/panel/clockworkpi,cwd686.yaml | 63 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-clockworkpi-cwd686.c | 456 ++++++++++++++++++ 5 files changed, 534 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c -- 2.37.1 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, Max Fierke, linux-kernel, dri-devel The ClockworkPi DevTerm (all models) uses a 6.86" IPS display of unknown provenance, which uses the Chipone ICNL9707 IC driver[1]. The display panel I have has two model numbers: TXW686001 and WTL068601G, but cannot find any manufacturer associated with either, so opting for the ClockworkPi model number. This driver is based on the GPL-licensed driver released by ClockworkPi[1], authored by Pinfan Zhu, with some additional cleanup, rotation support, and display sleep re-enabling done by me. [1] https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf [2] https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch Thanks to Krzysztof Kozlowski, Rob Herring, and Sam Ravnborg for their prior reviews and apologies for the long delay between patch set versions. Changes in v2: - dt-bindings: remove redundant backlight example - add missing regulators - remove some unused properties from definition (e.g. enable_gpio, supply) - reorder includes - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight - remove now-unneeded ctx->enabled and enable/disable hooks - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq - use dev_err_probe instead of checking EPROBE_DEFER - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver - add .get_orientation callback Max Fierke (4): dt-bindings: vendor-prefixes: Add prefix for ClockworkPi dt-bindings: display: Add ClockworkPi CWD686 panel drm: panel: Add driver for ClockworkPi cwd686 panel drm/panel: clockworkpi-cwd686: Implement .get_orientation callback .../display/panel/clockworkpi,cwd686.yaml | 63 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-clockworkpi-cwd686.c | 456 ++++++++++++++++++ 5 files changed, 534 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c -- 2.37.1 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi 2022-09-03 18:37 ` Max Fierke @ 2022-09-03 18:37 ` Max Fierke -1 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel, Max Fierke, Krzysztof Kozlowski Add a prefix for Clockwork Tech LLC, known as ClockworkPi. They produce a number of hobbyist devices, including the ClockworkPi DevTerm and GameShell. Signed-off-by: Max Fierke <max@maxfierke.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 7a326168d1d2..b9cf4f02c362 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -254,6 +254,8 @@ patternProperties: description: Cirrus Logic, Inc. "^cisco,.*": description: Cisco Systems, Inc. + "^clockworkpi,.*": + description: Clockwork Tech LLC "^cloudengines,.*": description: Cloud Engines, Inc. "^cnm,.*": -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, Max Fierke, linux-kernel, dri-devel, Krzysztof Kozlowski Add a prefix for Clockwork Tech LLC, known as ClockworkPi. They produce a number of hobbyist devices, including the ClockworkPi DevTerm and GameShell. Signed-off-by: Max Fierke <max@maxfierke.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 7a326168d1d2..b9cf4f02c362 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -254,6 +254,8 @@ patternProperties: description: Cirrus Logic, Inc. "^cisco,.*": description: Cisco Systems, Inc. + "^clockworkpi,.*": + description: Clockwork Tech LLC "^cloudengines,.*": description: Cloud Engines, Inc. "^cnm,.*": -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel 2022-09-03 18:37 ` Max Fierke @ 2022-09-03 18:37 ` Max Fierke -1 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel, Max Fierke, Krzysztof Kozlowski The CWD686 is a 6.86" IPS LCD panel used as the primary display in the ClockworkPi DevTerm portable (all cores) Signed-off-by: Max Fierke <max@maxfierke.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions) - remove redundant backlight example - add missing regulators .../display/panel/clockworkpi,cwd686.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml new file mode 100644 index 000000000000..eaf55d629266 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ClockworkPi CWD686 6.86" IPS LCD panel + +maintainers: + - Max Fierke <max@maxfierke.com> + +description: | + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 + resolution and uses 24 bit RGB per pixel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: clockworkpi,cwd686 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + + reset-gpios: true + rotation: true + backlight: true + +required: + - compatible + - reg + - backlight + - reset-gpios + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "clockworkpi,cwd686"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + rotation = <90>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_sys>; + }; + }; -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, Max Fierke, linux-kernel, dri-devel, Krzysztof Kozlowski The CWD686 is a 6.86" IPS LCD panel used as the primary display in the ClockworkPi DevTerm portable (all cores) Signed-off-by: Max Fierke <max@maxfierke.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions) - remove redundant backlight example - add missing regulators .../display/panel/clockworkpi,cwd686.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml new file mode 100644 index 000000000000..eaf55d629266 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ClockworkPi CWD686 6.86" IPS LCD panel + +maintainers: + - Max Fierke <max@maxfierke.com> + +description: | + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 + resolution and uses 24 bit RGB per pixel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: clockworkpi,cwd686 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + + reset-gpios: true + rotation: true + backlight: true + +required: + - compatible + - reg + - backlight + - reset-gpios + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "clockworkpi,cwd686"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + rotation = <90>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_sys>; + }; + }; -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel 2022-09-03 18:37 ` Max Fierke @ 2022-09-04 19:08 ` Krzysztof Kozlowski -1 siblings, 0 replies; 12+ messages in thread From: Krzysztof Kozlowski @ 2022-09-04 19:08 UTC (permalink / raw) To: Max Fierke, thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel On 03/09/2022 21:37, Max Fierke wrote: > The CWD686 is a 6.86" IPS LCD panel used as the primary > display in the ClockworkPi DevTerm portable (all cores) > > Signed-off-by: Max Fierke <max@maxfierke.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions) > - remove redundant backlight example > - add missing regulators > > .../display/panel/clockworkpi,cwd686.yaml | 63 +++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > new file mode 100644 > index 000000000000..eaf55d629266 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ClockworkPi CWD686 6.86" IPS LCD panel > + > +maintainers: > + - Max Fierke <max@maxfierke.com> > + > +description: | > + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the > + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 > + resolution and uses 24 bit RGB per pixel. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: clockworkpi,cwd686 > + > + reg: > + description: DSI virtual channel used by that screen > + maxItems: 1 You still need blank line here. > + iovcc-supply: > + description: regulator that supplies the iovcc voltage And here... > + vci-supply: > + description: regulator that supplies the vci voltage > + Best regards, Krzysztof ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel @ 2022-09-04 19:08 ` Krzysztof Kozlowski 0 siblings, 0 replies; 12+ messages in thread From: Krzysztof Kozlowski @ 2022-09-04 19:08 UTC (permalink / raw) To: Max Fierke, thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, linux-kernel, dri-devel On 03/09/2022 21:37, Max Fierke wrote: > The CWD686 is a 6.86" IPS LCD panel used as the primary > display in the ClockworkPi DevTerm portable (all cores) > > Signed-off-by: Max Fierke <max@maxfierke.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions) > - remove redundant backlight example > - add missing regulators > > .../display/panel/clockworkpi,cwd686.yaml | 63 +++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > new file mode 100644 > index 000000000000..eaf55d629266 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ClockworkPi CWD686 6.86" IPS LCD panel > + > +maintainers: > + - Max Fierke <max@maxfierke.com> > + > +description: | > + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the > + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 > + resolution and uses 24 bit RGB per pixel. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: clockworkpi,cwd686 > + > + reg: > + description: DSI virtual channel used by that screen > + maxItems: 1 You still need blank line here. > + iovcc-supply: > + description: regulator that supplies the iovcc voltage And here... > + vci-supply: > + description: regulator that supplies the vci voltage > + Best regards, Krzysztof ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel 2022-09-03 18:37 ` Max Fierke @ 2022-09-03 18:37 ` Max Fierke -1 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel, Max Fierke The ClockworkPi DevTerm (all models) uses a 6.86" IPS display of unknown provenance, which uses the Chipone ICNL9707 IC driver. The display panel I have has two model numbers: TXW686001 and WTL068601G, but cannot find any manufacturer associated with either, so opting for the ClockworkPi model number. This driver is based on the GPL-licensed driver released by ClockworkPi, authored by Pinfan Zhu, with some additional cleanup, rotation support, and display sleep re-enabling done by me. Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf Signed-off-by: Max Fierke <max@maxfierke.com> --- Changes in v2: (Sam Ravnborg's suggestions) - remove some unused properties from definition (e.g. enable_gpio, supply) - add missing regulators - reorder includes - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight - remove now-unneeded ctx->enabled and enable/disable hooks - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq - use dev_err_probe instead of checking EPROBE_DEFER - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-clockworkpi-cwd686.c | 445 ++++++++++++++++++ 3 files changed, 458 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 584a69f99af6..a93c697867f9 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 45NA WUXGA PANEL DSI Video Mode panel +config DRM_PANEL_CLOCKWORKPI_CWD686 + tristate "ClockworkPi CWD686 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the ClockworkPi CWD686 + ICNL9707-based panel, e.g. as used within the ClockworkPi DevTerm. + The panel has a 480x1280 resolution and uses 24 bit RGB per pixel. + + To compile this driver as a module, choose M here. + config DRM_PANEL_DSI_CM tristate "Generic DSI command mode panels" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 34e717382dbb..6c3ed2acaa6b 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596. obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o +obj-$(CONFIG_DRM_PANEL_CLOCKWORKPI_CWD686) += panel-clockworkpi-cwd686.o obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c new file mode 100644 index 000000000000..87d20d784596 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021 Clockwork Tech LLC + * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com> + * + * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP + */ + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> +#include <linux/of_device.h> +#include <linux/module.h> + +#include <video/mipi_display.h> + +#include <drm/drm_modes.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +struct cwd686 { + struct device *dev; + struct drm_panel panel; + struct regulator *vci; + struct regulator *iovcc; + struct gpio_desc *reset_gpio; + enum drm_panel_orientation orientation; + bool prepared; +}; + +static const struct drm_display_mode default_mode = { + .clock = 54465, + .hdisplay = 480, + .hsync_start = 480 + 150, + .hsync_end = 480 + 150 + 24, + .htotal = 480 + 150 + 24 + 40, + .vdisplay = 1280, + .vsync_start = 1280 + 12, + .vsync_end = 1280 + 12 + 6, + .vtotal = 1280 + 12 + 6 + 10, +}; + +static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel) +{ + return container_of(panel, struct cwd686, panel); +} + +#define ICNL9707_CMD_CGOUTL 0xB3 +#define ICNL9707_CMD_CGOUTR 0xB4 +#define ICNL9707_P_CGOUT_VGL 0x00 +#define ICNL9707_P_CGOUT_VGH 0x01 +#define ICNL9707_P_CGOUT_HZ 0x02 +#define ICNL9707_P_CGOUT_GND 0x03 +#define ICNL9707_P_CGOUT_GSP1 0x04 +#define ICNL9707_P_CGOUT_GSP2 0x05 +#define ICNL9707_P_CGOUT_GSP3 0x06 +#define ICNL9707_P_CGOUT_GSP4 0x07 +#define ICNL9707_P_CGOUT_GSP5 0x08 +#define ICNL9707_P_CGOUT_GSP6 0x09 +#define ICNL9707_P_CGOUT_GSP7 0x0A +#define ICNL9707_P_CGOUT_GSP8 0x0B +#define ICNL9707_P_CGOUT_GCK1 0x0C +#define ICNL9707_P_CGOUT_GCK2 0x0D +#define ICNL9707_P_CGOUT_GCK3 0x0E +#define ICNL9707_P_CGOUT_GCK4 0x0F +#define ICNL9707_P_CGOUT_GCK5 0x10 +#define ICNL9707_P_CGOUT_GCK6 0x11 +#define ICNL9707_P_CGOUT_GCK7 0x12 +#define ICNL9707_P_CGOUT_GCK8 0x13 +#define ICNL9707_P_CGOUT_GCK9 0x14 +#define ICNL9707_P_CGOUT_GCK10 0x15 +#define ICNL9707_P_CGOUT_GCK11 0x16 +#define ICNL9707_P_CGOUT_GCK12 0x17 +#define ICNL9707_P_CGOUT_GCK13 0x18 +#define ICNL9707_P_CGOUT_GCK14 0x19 +#define ICNL9707_P_CGOUT_GCK15 0x1A +#define ICNL9707_P_CGOUT_GCK16 0x1B +#define ICNL9707_P_CGOUT_DIR 0x1C +#define ICNL9707_P_CGOUT_DIRB 0x1D +#define ICNL9707_P_CGOUT_ECLK_AC 0x1E +#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F +#define ICNL9707_P_CGOUT_ECLK_AC2 0x20 +#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21 +#define ICNL9707_P_CGOUT_GCH 0x22 +#define ICNL9707_P_CGOUT_GCL 0x23 +#define ICNL9707_P_CGOUT_XDON 0x24 +#define ICNL9707_P_CGOUT_XDONB 0x25 + +#define ICNL9707_MADCTL_ML 0x10 +#define ICNL9707_MADCTL_RGB 0x00 +#define ICNL9707_MADCTL_BGR 0x08 +#define ICNL9707_MADCTL_MH 0x04 + +#define ICNL9707_CMD_PWRCON_VCOM 0xB6 +#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D + +#define ICNL9707_CMD_PWRCON_SEQ 0xB7 +#define ICNL9707_CMD_PWRCON_CLK 0xB8 +#define ICNL9707_CMD_PWRCON_BTA 0xB9 +#define ICNL9707_CMD_PWRCON_MODE 0xBA +#define ICNL9707_CMD_PWRCON_REG 0xBD + +#define ICNL9707_CMD_TCON 0xC1 +#define ICNL9707_CMD_TCON2 0xC2 +#define ICNL9707_CMD_TCON3 0xC3 +#define ICNL9707_CMD_SRC_TIM 0xC6 +#define ICNL9707_CMD_SRCCON 0xC7 +#define ICNL9707_CMD_SET_GAMMA 0xC8 + +#define ICNL9707_CMD_ETC 0xD0 + +#define ICNL9707_CMD_PASSWORD1 0xF0 +#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5 +#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A + +#define ICNL9707_CMD_PASSWORD2 0xF1 +#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A +#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5 + +static int cwd686_init_sequence(struct cwd686 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + /* Enable access to Level 2 registers */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1, + ICNL9707_P_PASSWORD1_ENABLE_LVL2, + ICNL9707_P_PASSWORD1_ENABLE_LVL2); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2, + ICNL9707_P_PASSWORD2_ENABLE_LVL2, + ICNL9707_P_PASSWORD2_ENABLE_LVL2); + + /* Set PWRCON_VCOM (-0.495V, -0.495V) */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_VCOM, + ICNL9707_P_PWRCON_VCOM_0495V, + ICNL9707_P_PWRCON_VCOM_0495V); + + /* Map ASG output signals */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTR, + ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5, + ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5, + ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTL, + ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6, + ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6, + ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4); + + /* Undocumented commands provided by the vendor */ + mipi_dsi_dcs_write_seq(dsi, 0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01); + mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01); + mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x73); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_REG, + 0x4E, 0x0E, 0x50, 0x50, 0x26, + 0x1D, 0x00, 0x14, 0x42, 0x03); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_SEQ, + 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55, + 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00, + 0x00, 0x00, 0x02, 0xFF, 0x3C); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63); + + /* Disable abnormal power-off flag */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63); + + /* Set VBP, VFP, VSW, HBP, HFP, HSW */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04); + + /* Set resolution */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON2, 0x11, 0x41); + + /* Set frame blanking */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00); + + /* Another undocumented command */ + mipi_dsi_dcs_write_seq(dsi, 0xC5, 0x00); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF); + + /* Another set of undocumented commands */ + mipi_dsi_dcs_write_seq(dsi, 0xD2, 0x63, 0x0B, 0x08, 0x88); + mipi_dsi_dcs_write_seq(dsi, 0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07); + + /* Set Gamma to 2.2 */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SET_GAMMA, + 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B, + 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57, + 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A, + 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D, + 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48, + 0x3B, 0x2A, 0x06); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00); + + /* Another undocumented command */ + mipi_dsi_dcs_write_seq(dsi, 0xF4, 0x08, 0x77); + + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, + ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH); + + /* Enable tearing mode at VBLANK */ + err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (err) { + dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err); + return err; + } + + /* Disable access to Level 2 registers */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2, + ICNL9707_P_PASSWORD2_DEFAULT, + ICNL9707_P_PASSWORD2_DEFAULT); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1, + ICNL9707_P_PASSWORD1_DEFAULT, + ICNL9707_P_PASSWORD1_DEFAULT); + + return 0; +} + +static int cwd686_unprepare(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + if (!ctx->prepared) + return 0; + + err = mipi_dsi_dcs_set_display_off(dsi); + if (err) { + dev_err(ctx->dev, "failed to turn display off (%d)\n", err); + return err; + } + + err = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (err) { + dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err); + return err; + } + + msleep(120); + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vci); + + ctx->prepared = false; + + return 0; +} + +static int cwd686_prepare(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + if (ctx->prepared) + return 0; + + err = regulator_enable(ctx->vci); + if (err < 0) { + dev_err(ctx->dev, "failed to enable vci supply: %d\n", err); + return err; + } + err = regulator_enable(ctx->iovcc); + if (err < 0) { + dev_err(ctx->dev, "failed to enable iovcc supply: %d\n", err); + goto disable_vci; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + /* T2 */ + msleep(10); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + /* T3 */ + msleep(20); + + /* Exit sleep mode and power on */ + + err = cwd686_init_sequence(ctx); + if (err) { + dev_err(ctx->dev, "failed to initialize display (%d)\n", err); + goto disable_iovcc; + } + + err = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (err) { + dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err); + goto disable_iovcc; + } + /* T6 */ + msleep(120); + + err = mipi_dsi_dcs_set_display_on(dsi); + if (err) { + dev_err(ctx->dev, "failed to turn display on (%d)\n", err); + goto disable_iovcc; + } + msleep(20); + + ctx->prepared = true; + + return 0; +disable_iovcc: + regulator_disable(ctx->iovcc); +disable_vci: + regulator_disable(ctx->vci); + return err; +} + +static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(panel->dev, "bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + /* Set up connector's "panel orientation" property */ + drm_connector_set_panel_orientation(connector, ctx->orientation); + + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs cwd686_drm_funcs = { + .unprepare = cwd686_unprepare, + .prepare = cwd686_prepare, + .get_modes = cwd686_get_modes, +}; + +static int cwd686_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct cwd686 *ctx; + int err; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dev = dev; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) { + err = PTR_ERR(ctx->reset_gpio); + return dev_err_probe(dev, err, "Failed to request GPIO (%d)\n", err); + } + + ctx->vci = devm_regulator_get(dev, "vci"); + if (IS_ERR(ctx->vci)) { + err = PTR_ERR(ctx->vci); + return dev_err_probe(dev, err, "Failed to request vci regulator: %d\n", err); + } + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + err = PTR_ERR(ctx->iovcc); + return dev_err_probe(dev, err, "Failed to request iovcc regulator: %d\n", err); + } + + err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); + if (err) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err); + return err; + } + + drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI); + + err = drm_panel_of_backlight(&ctx->panel); + if (err) + return dev_err_probe(dev, err, "Failed to get backlight\n"); + + drm_panel_add(&ctx->panel); + + err = mipi_dsi_attach(dsi); + if (err < 0) { + dev_err(dev, "mipi_dsi_attach() failed: %d\n", err); + drm_panel_remove(&ctx->panel); + return err; + } + + return 0; +} + +static void cwd686_remove(struct mipi_dsi_device *dsi) +{ + struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id cwd686_of_match[] = { + { .compatible = "clockworkpi,cwd686" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, cwd686_of_match); + +static struct mipi_dsi_driver cwd686_driver = { + .probe = cwd686_probe, + .remove = cwd686_remove, + .driver = { + .name = "panel-clockworkpi-cwd686", + .of_match_table = cwd686_of_match, + }, +}; +module_mipi_dsi_driver(cwd686_driver); + +MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>"); +MODULE_AUTHOR("Max Fierke <max@maxfierke.com>"); +MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver"); +MODULE_LICENSE("GPL"); -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, Max Fierke, linux-kernel, dri-devel The ClockworkPi DevTerm (all models) uses a 6.86" IPS display of unknown provenance, which uses the Chipone ICNL9707 IC driver. The display panel I have has two model numbers: TXW686001 and WTL068601G, but cannot find any manufacturer associated with either, so opting for the ClockworkPi model number. This driver is based on the GPL-licensed driver released by ClockworkPi, authored by Pinfan Zhu, with some additional cleanup, rotation support, and display sleep re-enabling done by me. Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf Signed-off-by: Max Fierke <max@maxfierke.com> --- Changes in v2: (Sam Ravnborg's suggestions) - remove some unused properties from definition (e.g. enable_gpio, supply) - add missing regulators - reorder includes - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight - remove now-unneeded ctx->enabled and enable/disable hooks - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq - use dev_err_probe instead of checking EPROBE_DEFER - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-clockworkpi-cwd686.c | 445 ++++++++++++++++++ 3 files changed, 458 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 584a69f99af6..a93c697867f9 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 45NA WUXGA PANEL DSI Video Mode panel +config DRM_PANEL_CLOCKWORKPI_CWD686 + tristate "ClockworkPi CWD686 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the ClockworkPi CWD686 + ICNL9707-based panel, e.g. as used within the ClockworkPi DevTerm. + The panel has a 480x1280 resolution and uses 24 bit RGB per pixel. + + To compile this driver as a module, choose M here. + config DRM_PANEL_DSI_CM tristate "Generic DSI command mode panels" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 34e717382dbb..6c3ed2acaa6b 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596. obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o +obj-$(CONFIG_DRM_PANEL_CLOCKWORKPI_CWD686) += panel-clockworkpi-cwd686.o obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c new file mode 100644 index 000000000000..87d20d784596 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021 Clockwork Tech LLC + * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com> + * + * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP + */ + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> +#include <linux/of_device.h> +#include <linux/module.h> + +#include <video/mipi_display.h> + +#include <drm/drm_modes.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +struct cwd686 { + struct device *dev; + struct drm_panel panel; + struct regulator *vci; + struct regulator *iovcc; + struct gpio_desc *reset_gpio; + enum drm_panel_orientation orientation; + bool prepared; +}; + +static const struct drm_display_mode default_mode = { + .clock = 54465, + .hdisplay = 480, + .hsync_start = 480 + 150, + .hsync_end = 480 + 150 + 24, + .htotal = 480 + 150 + 24 + 40, + .vdisplay = 1280, + .vsync_start = 1280 + 12, + .vsync_end = 1280 + 12 + 6, + .vtotal = 1280 + 12 + 6 + 10, +}; + +static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel) +{ + return container_of(panel, struct cwd686, panel); +} + +#define ICNL9707_CMD_CGOUTL 0xB3 +#define ICNL9707_CMD_CGOUTR 0xB4 +#define ICNL9707_P_CGOUT_VGL 0x00 +#define ICNL9707_P_CGOUT_VGH 0x01 +#define ICNL9707_P_CGOUT_HZ 0x02 +#define ICNL9707_P_CGOUT_GND 0x03 +#define ICNL9707_P_CGOUT_GSP1 0x04 +#define ICNL9707_P_CGOUT_GSP2 0x05 +#define ICNL9707_P_CGOUT_GSP3 0x06 +#define ICNL9707_P_CGOUT_GSP4 0x07 +#define ICNL9707_P_CGOUT_GSP5 0x08 +#define ICNL9707_P_CGOUT_GSP6 0x09 +#define ICNL9707_P_CGOUT_GSP7 0x0A +#define ICNL9707_P_CGOUT_GSP8 0x0B +#define ICNL9707_P_CGOUT_GCK1 0x0C +#define ICNL9707_P_CGOUT_GCK2 0x0D +#define ICNL9707_P_CGOUT_GCK3 0x0E +#define ICNL9707_P_CGOUT_GCK4 0x0F +#define ICNL9707_P_CGOUT_GCK5 0x10 +#define ICNL9707_P_CGOUT_GCK6 0x11 +#define ICNL9707_P_CGOUT_GCK7 0x12 +#define ICNL9707_P_CGOUT_GCK8 0x13 +#define ICNL9707_P_CGOUT_GCK9 0x14 +#define ICNL9707_P_CGOUT_GCK10 0x15 +#define ICNL9707_P_CGOUT_GCK11 0x16 +#define ICNL9707_P_CGOUT_GCK12 0x17 +#define ICNL9707_P_CGOUT_GCK13 0x18 +#define ICNL9707_P_CGOUT_GCK14 0x19 +#define ICNL9707_P_CGOUT_GCK15 0x1A +#define ICNL9707_P_CGOUT_GCK16 0x1B +#define ICNL9707_P_CGOUT_DIR 0x1C +#define ICNL9707_P_CGOUT_DIRB 0x1D +#define ICNL9707_P_CGOUT_ECLK_AC 0x1E +#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F +#define ICNL9707_P_CGOUT_ECLK_AC2 0x20 +#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21 +#define ICNL9707_P_CGOUT_GCH 0x22 +#define ICNL9707_P_CGOUT_GCL 0x23 +#define ICNL9707_P_CGOUT_XDON 0x24 +#define ICNL9707_P_CGOUT_XDONB 0x25 + +#define ICNL9707_MADCTL_ML 0x10 +#define ICNL9707_MADCTL_RGB 0x00 +#define ICNL9707_MADCTL_BGR 0x08 +#define ICNL9707_MADCTL_MH 0x04 + +#define ICNL9707_CMD_PWRCON_VCOM 0xB6 +#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D + +#define ICNL9707_CMD_PWRCON_SEQ 0xB7 +#define ICNL9707_CMD_PWRCON_CLK 0xB8 +#define ICNL9707_CMD_PWRCON_BTA 0xB9 +#define ICNL9707_CMD_PWRCON_MODE 0xBA +#define ICNL9707_CMD_PWRCON_REG 0xBD + +#define ICNL9707_CMD_TCON 0xC1 +#define ICNL9707_CMD_TCON2 0xC2 +#define ICNL9707_CMD_TCON3 0xC3 +#define ICNL9707_CMD_SRC_TIM 0xC6 +#define ICNL9707_CMD_SRCCON 0xC7 +#define ICNL9707_CMD_SET_GAMMA 0xC8 + +#define ICNL9707_CMD_ETC 0xD0 + +#define ICNL9707_CMD_PASSWORD1 0xF0 +#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5 +#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A + +#define ICNL9707_CMD_PASSWORD2 0xF1 +#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A +#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5 + +static int cwd686_init_sequence(struct cwd686 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + /* Enable access to Level 2 registers */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1, + ICNL9707_P_PASSWORD1_ENABLE_LVL2, + ICNL9707_P_PASSWORD1_ENABLE_LVL2); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2, + ICNL9707_P_PASSWORD2_ENABLE_LVL2, + ICNL9707_P_PASSWORD2_ENABLE_LVL2); + + /* Set PWRCON_VCOM (-0.495V, -0.495V) */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_VCOM, + ICNL9707_P_PWRCON_VCOM_0495V, + ICNL9707_P_PWRCON_VCOM_0495V); + + /* Map ASG output signals */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTR, + ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5, + ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5, + ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTL, + ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6, + ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6, + ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND, + ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4); + + /* Undocumented commands provided by the vendor */ + mipi_dsi_dcs_write_seq(dsi, 0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01); + mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01); + mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x73); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_REG, + 0x4E, 0x0E, 0x50, 0x50, 0x26, + 0x1D, 0x00, 0x14, 0x42, 0x03); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_SEQ, + 0x01, 0x01, 0x09, 0x11, 0x0D, 0x55, + 0x19, 0x19, 0x21, 0x1D, 0x00, 0x00, + 0x00, 0x00, 0x02, 0xFF, 0x3C); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63); + + /* Disable abnormal power-off flag */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63); + + /* Set VBP, VFP, VSW, HBP, HFP, HSW */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04); + + /* Set resolution */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON2, 0x11, 0x41); + + /* Set frame blanking */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00); + + /* Another undocumented command */ + mipi_dsi_dcs_write_seq(dsi, 0xC5, 0x00); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF); + + /* Another set of undocumented commands */ + mipi_dsi_dcs_write_seq(dsi, 0xD2, 0x63, 0x0B, 0x08, 0x88); + mipi_dsi_dcs_write_seq(dsi, 0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07); + + /* Set Gamma to 2.2 */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SET_GAMMA, + 0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B, + 0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57, + 0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A, + 0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D, + 0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48, + 0x3B, 0x2A, 0x06); + + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00); + + /* Another undocumented command */ + mipi_dsi_dcs_write_seq(dsi, 0xF4, 0x08, 0x77); + + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, + ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH); + + /* Enable tearing mode at VBLANK */ + err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (err) { + dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err); + return err; + } + + /* Disable access to Level 2 registers */ + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2, + ICNL9707_P_PASSWORD2_DEFAULT, + ICNL9707_P_PASSWORD2_DEFAULT); + mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1, + ICNL9707_P_PASSWORD1_DEFAULT, + ICNL9707_P_PASSWORD1_DEFAULT); + + return 0; +} + +static int cwd686_unprepare(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + if (!ctx->prepared) + return 0; + + err = mipi_dsi_dcs_set_display_off(dsi); + if (err) { + dev_err(ctx->dev, "failed to turn display off (%d)\n", err); + return err; + } + + err = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (err) { + dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err); + return err; + } + + msleep(120); + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vci); + + ctx->prepared = false; + + return 0; +} + +static int cwd686_prepare(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int err; + + if (ctx->prepared) + return 0; + + err = regulator_enable(ctx->vci); + if (err < 0) { + dev_err(ctx->dev, "failed to enable vci supply: %d\n", err); + return err; + } + err = regulator_enable(ctx->iovcc); + if (err < 0) { + dev_err(ctx->dev, "failed to enable iovcc supply: %d\n", err); + goto disable_vci; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + /* T2 */ + msleep(10); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + /* T3 */ + msleep(20); + + /* Exit sleep mode and power on */ + + err = cwd686_init_sequence(ctx); + if (err) { + dev_err(ctx->dev, "failed to initialize display (%d)\n", err); + goto disable_iovcc; + } + + err = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (err) { + dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err); + goto disable_iovcc; + } + /* T6 */ + msleep(120); + + err = mipi_dsi_dcs_set_display_on(dsi); + if (err) { + dev_err(ctx->dev, "failed to turn display on (%d)\n", err); + goto disable_iovcc; + } + msleep(20); + + ctx->prepared = true; + + return 0; +disable_iovcc: + regulator_disable(ctx->iovcc); +disable_vci: + regulator_disable(ctx->vci); + return err; +} + +static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &default_mode); + if (!mode) { + dev_err(panel->dev, "bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + /* Set up connector's "panel orientation" property */ + drm_connector_set_panel_orientation(connector, ctx->orientation); + + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs cwd686_drm_funcs = { + .unprepare = cwd686_unprepare, + .prepare = cwd686_prepare, + .get_modes = cwd686_get_modes, +}; + +static int cwd686_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct cwd686 *ctx; + int err; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dev = dev; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) { + err = PTR_ERR(ctx->reset_gpio); + return dev_err_probe(dev, err, "Failed to request GPIO (%d)\n", err); + } + + ctx->vci = devm_regulator_get(dev, "vci"); + if (IS_ERR(ctx->vci)) { + err = PTR_ERR(ctx->vci); + return dev_err_probe(dev, err, "Failed to request vci regulator: %d\n", err); + } + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) { + err = PTR_ERR(ctx->iovcc); + return dev_err_probe(dev, err, "Failed to request iovcc regulator: %d\n", err); + } + + err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); + if (err) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err); + return err; + } + + drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI); + + err = drm_panel_of_backlight(&ctx->panel); + if (err) + return dev_err_probe(dev, err, "Failed to get backlight\n"); + + drm_panel_add(&ctx->panel); + + err = mipi_dsi_attach(dsi); + if (err < 0) { + dev_err(dev, "mipi_dsi_attach() failed: %d\n", err); + drm_panel_remove(&ctx->panel); + return err; + } + + return 0; +} + +static void cwd686_remove(struct mipi_dsi_device *dsi) +{ + struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id cwd686_of_match[] = { + { .compatible = "clockworkpi,cwd686" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, cwd686_of_match); + +static struct mipi_dsi_driver cwd686_driver = { + .probe = cwd686_probe, + .remove = cwd686_remove, + .driver = { + .name = "panel-clockworkpi-cwd686", + .of_match_table = cwd686_of_match, + }, +}; +module_mipi_dsi_driver(cwd686_driver); + +MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>"); +MODULE_AUTHOR("Max Fierke <max@maxfierke.com>"); +MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver"); +MODULE_LICENSE("GPL"); -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback 2022-09-03 18:37 ` Max Fierke @ 2022-09-03 18:37 ` Max Fierke -1 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: dri-devel, devicetree, linux-kernel, Max Fierke Returns the panel's configured orientation Signed-off-by: Max Fierke <max@maxfierke.com> --- Changes in v2: - this was added as .get_orientation is now available in drm-misc-next since v1 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c index 87d20d784596..2c433a458c8b 100644 --- a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c +++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c @@ -340,7 +340,10 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; - /* Set up connector's "panel orientation" property */ + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, ctx->orientation); drm_mode_probed_add(connector, mode); @@ -348,10 +351,18 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne return 1; /* Number of modes */ } +static enum drm_panel_orientation cwd686_get_orientation(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + + return ctx->orientation; +} + static const struct drm_panel_funcs cwd686_drm_funcs = { .unprepare = cwd686_unprepare, .prepare = cwd686_prepare, .get_modes = cwd686_get_modes, + .get_orientation = cwd686_get_orientation, }; static int cwd686_probe(struct mipi_dsi_device *dsi) -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback @ 2022-09-03 18:37 ` Max Fierke 0 siblings, 0 replies; 12+ messages in thread From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw) To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt Cc: devicetree, Max Fierke, linux-kernel, dri-devel Returns the panel's configured orientation Signed-off-by: Max Fierke <max@maxfierke.com> --- Changes in v2: - this was added as .get_orientation is now available in drm-misc-next since v1 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c index 87d20d784596..2c433a458c8b 100644 --- a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c +++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c @@ -340,7 +340,10 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; - /* Set up connector's "panel orientation" property */ + /* + * TODO: Remove once all drm drivers call + * drm_connector_set_orientation_from_panel() + */ drm_connector_set_panel_orientation(connector, ctx->orientation); drm_mode_probed_add(connector, mode); @@ -348,10 +351,18 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne return 1; /* Number of modes */ } +static enum drm_panel_orientation cwd686_get_orientation(struct drm_panel *panel) +{ + struct cwd686 *ctx = panel_to_cwd686(panel); + + return ctx->orientation; +} + static const struct drm_panel_funcs cwd686_drm_funcs = { .unprepare = cwd686_unprepare, .prepare = cwd686_prepare, .get_modes = cwd686_get_modes, + .get_orientation = cwd686_get_orientation, }; static int cwd686_probe(struct mipi_dsi_device *dsi) -- 2.37.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-09-05 6:30 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-09-03 18:37 [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver Max Fierke 2022-09-03 18:37 ` Max Fierke 2022-09-03 18:37 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi Max Fierke 2022-09-03 18:37 ` Max Fierke 2022-09-03 18:37 ` [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel Max Fierke 2022-09-03 18:37 ` Max Fierke 2022-09-04 19:08 ` Krzysztof Kozlowski 2022-09-04 19:08 ` Krzysztof Kozlowski 2022-09-03 18:37 ` [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel Max Fierke 2022-09-03 18:37 ` Max Fierke 2022-09-03 18:37 ` [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback Max Fierke 2022-09-03 18:37 ` Max Fierke
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.