All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver
@ 2022-09-03 18:37 ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel, Max Fierke

The ClockworkPi DevTerm (all models) uses a 6.86" IPS display
of unknown provenance, which uses the Chipone ICNL9707 IC driver[1].

The display panel I have has two model numbers: TXW686001 and WTL068601G,
but cannot find any manufacturer associated with either, so opting for the
ClockworkPi model number.

This driver is based on the GPL-licensed driver released by ClockworkPi[1],
authored by Pinfan Zhu, with some additional cleanup, rotation support,
and display sleep re-enabling done by me.

[1] https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf
[2] https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch

Thanks to Krzysztof Kozlowski, Rob Herring, and Sam Ravnborg for their
prior reviews and apologies for the long delay between patch set versions.

Changes in v2:
 - dt-bindings: remove redundant backlight example
 - add missing regulators
 - remove some unused properties from definition (e.g. enable_gpio, supply)
 - reorder includes
 - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight
 - remove now-unneeded ctx->enabled and enable/disable hooks
 - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq
 - use dev_err_probe instead of checking EPROBE_DEFER
 - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver
 - add .get_orientation callback

Max Fierke (4):
  dt-bindings: vendor-prefixes: Add prefix for ClockworkPi
  dt-bindings: display: Add ClockworkPi CWD686 panel
  drm: panel: Add driver for ClockworkPi cwd686 panel
  drm/panel: clockworkpi-cwd686: Implement .get_orientation callback

 .../display/panel/clockworkpi,cwd686.yaml     |  63 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/gpu/drm/panel/Kconfig                 |  12 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-clockworkpi-cwd686.c  | 456 ++++++++++++++++++
 5 files changed, 534 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c

-- 
2.37.1

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver
@ 2022-09-03 18:37 ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: devicetree, Max Fierke, linux-kernel, dri-devel

The ClockworkPi DevTerm (all models) uses a 6.86" IPS display
of unknown provenance, which uses the Chipone ICNL9707 IC driver[1].

The display panel I have has two model numbers: TXW686001 and WTL068601G,
but cannot find any manufacturer associated with either, so opting for the
ClockworkPi model number.

This driver is based on the GPL-licensed driver released by ClockworkPi[1],
authored by Pinfan Zhu, with some additional cleanup, rotation support,
and display sleep re-enabling done by me.

[1] https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf
[2] https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch

Thanks to Krzysztof Kozlowski, Rob Herring, and Sam Ravnborg for their
prior reviews and apologies for the long delay between patch set versions.

Changes in v2:
 - dt-bindings: remove redundant backlight example
 - add missing regulators
 - remove some unused properties from definition (e.g. enable_gpio, supply)
 - reorder includes
 - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight
 - remove now-unneeded ctx->enabled and enable/disable hooks
 - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq
 - use dev_err_probe instead of checking EPROBE_DEFER
 - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver
 - add .get_orientation callback

Max Fierke (4):
  dt-bindings: vendor-prefixes: Add prefix for ClockworkPi
  dt-bindings: display: Add ClockworkPi CWD686 panel
  drm: panel: Add driver for ClockworkPi cwd686 panel
  drm/panel: clockworkpi-cwd686: Implement .get_orientation callback

 .../display/panel/clockworkpi,cwd686.yaml     |  63 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/gpu/drm/panel/Kconfig                 |  12 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-clockworkpi-cwd686.c  | 456 ++++++++++++++++++
 5 files changed, 534 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c

-- 
2.37.1

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi
  2022-09-03 18:37 ` Max Fierke
@ 2022-09-03 18:37   ` Max Fierke
  -1 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel, Max Fierke, Krzysztof Kozlowski

Add a prefix for Clockwork Tech LLC, known as ClockworkPi. They
produce a number of hobbyist devices, including the ClockworkPi
DevTerm and GameShell.

Signed-off-by: Max Fierke <max@maxfierke.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 7a326168d1d2..b9cf4f02c362 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -254,6 +254,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^clockworkpi,.*":
+    description: Clockwork Tech LLC
   "^cloudengines,.*":
     description: Cloud Engines, Inc.
   "^cnm,.*":
-- 
2.37.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi
@ 2022-09-03 18:37   ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: devicetree, Max Fierke, linux-kernel, dri-devel, Krzysztof Kozlowski

Add a prefix for Clockwork Tech LLC, known as ClockworkPi. They
produce a number of hobbyist devices, including the ClockworkPi
DevTerm and GameShell.

Signed-off-by: Max Fierke <max@maxfierke.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 7a326168d1d2..b9cf4f02c362 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -254,6 +254,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^clockworkpi,.*":
+    description: Clockwork Tech LLC
   "^cloudengines,.*":
     description: Cloud Engines, Inc.
   "^cnm,.*":
-- 
2.37.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel
  2022-09-03 18:37 ` Max Fierke
@ 2022-09-03 18:37   ` Max Fierke
  -1 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel, Max Fierke, Krzysztof Kozlowski

The CWD686 is a 6.86" IPS LCD panel used as the primary
display in the ClockworkPi DevTerm portable (all cores)

Signed-off-by: Max Fierke <max@maxfierke.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions)
 - remove redundant backlight example
 - add missing regulators

 .../display/panel/clockworkpi,cwd686.yaml     | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
new file mode 100644
index 000000000000..eaf55d629266
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ClockworkPi CWD686 6.86" IPS LCD panel
+
+maintainers:
+  - Max Fierke <max@maxfierke.com>
+
+description: |
+  The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
+  ClockworkPi DevTerm series of portable devices. The panel has a 480x1280
+  resolution and uses 24 bit RGB per pixel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: clockworkpi,cwd686
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+  reset-gpios: true
+  rotation: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - reset-gpios
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "clockworkpi,cwd686";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_sys>;
+        };
+    };
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel
@ 2022-09-03 18:37   ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: devicetree, Max Fierke, linux-kernel, dri-devel, Krzysztof Kozlowski

The CWD686 is a 6.86" IPS LCD panel used as the primary
display in the ClockworkPi DevTerm portable (all cores)

Signed-off-by: Max Fierke <max@maxfierke.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions)
 - remove redundant backlight example
 - add missing regulators

 .../display/panel/clockworkpi,cwd686.yaml     | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
new file mode 100644
index 000000000000..eaf55d629266
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ClockworkPi CWD686 6.86" IPS LCD panel
+
+maintainers:
+  - Max Fierke <max@maxfierke.com>
+
+description: |
+  The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
+  ClockworkPi DevTerm series of portable devices. The panel has a 480x1280
+  resolution and uses 24 bit RGB per pixel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: clockworkpi,cwd686
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+  reset-gpios: true
+  rotation: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - reset-gpios
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "clockworkpi,cwd686";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_sys>;
+        };
+    };
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel
  2022-09-03 18:37 ` Max Fierke
@ 2022-09-03 18:37   ` Max Fierke
  -1 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel, Max Fierke

The ClockworkPi DevTerm (all models) uses a 6.86" IPS display
of unknown provenance, which uses the Chipone ICNL9707 IC driver.

The display panel I have has two model numbers: TXW686001 and WTL068601G,
but cannot find any manufacturer associated with either, so opting for the
ClockworkPi model number.

This driver is based on the GPL-licensed driver released by ClockworkPi,
authored by Pinfan Zhu, with some additional cleanup, rotation support,
and display sleep re-enabling done by me.

Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch
Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf

Signed-off-by: Max Fierke <max@maxfierke.com>
---
Changes in v2: (Sam Ravnborg's suggestions)
 - remove some unused properties from definition (e.g. enable_gpio, supply)
 - add missing regulators
 - reorder includes
 - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight
 - remove now-unneeded ctx->enabled and enable/disable hooks
 - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq
 - use dev_err_probe instead of checking EPROBE_DEFER
 - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver

 drivers/gpu/drm/panel/Kconfig                 |  12 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-clockworkpi-cwd686.c  | 445 ++++++++++++++++++
 3 files changed, 458 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 584a69f99af6..a93c697867f9 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6
 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
 	  45NA WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_CLOCKWORKPI_CWD686
+	tristate "ClockworkPi CWD686 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the ClockworkPi CWD686
+	  ICNL9707-based panel, e.g. as used within the ClockworkPi DevTerm.
+	  The panel has a 480x1280 resolution and uses 24 bit RGB per pixel.
+
+	  To compile this driver as a module, choose M here.
+
 config DRM_PANEL_DSI_CM
 	tristate "Generic DSI command mode panels"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 34e717382dbb..6c3ed2acaa6b 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
 obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_CLOCKWORKPI_CWD686) += panel-clockworkpi-cwd686.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
new file mode 100644
index 000000000000..87d20d784596
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Clockwork Tech LLC
+ * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com>
+ *
+ * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+struct cwd686 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct regulator *vci;
+	struct regulator *iovcc;
+	struct gpio_desc *reset_gpio;
+	enum drm_panel_orientation orientation;
+	bool prepared;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 54465,
+	.hdisplay = 480,
+	.hsync_start = 480 + 150,
+	.hsync_end = 480 + 150 + 24,
+	.htotal = 480 + 150 + 24 + 40,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 12,
+	.vsync_end = 1280 + 12 + 6,
+	.vtotal = 1280 + 12 + 6 + 10,
+};
+
+static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
+{
+	return container_of(panel, struct cwd686, panel);
+}
+
+#define ICNL9707_CMD_CGOUTL 0xB3
+#define ICNL9707_CMD_CGOUTR 0xB4
+#define ICNL9707_P_CGOUT_VGL 0x00
+#define ICNL9707_P_CGOUT_VGH 0x01
+#define ICNL9707_P_CGOUT_HZ 0x02
+#define ICNL9707_P_CGOUT_GND 0x03
+#define ICNL9707_P_CGOUT_GSP1 0x04
+#define ICNL9707_P_CGOUT_GSP2 0x05
+#define ICNL9707_P_CGOUT_GSP3 0x06
+#define ICNL9707_P_CGOUT_GSP4 0x07
+#define ICNL9707_P_CGOUT_GSP5 0x08
+#define ICNL9707_P_CGOUT_GSP6 0x09
+#define ICNL9707_P_CGOUT_GSP7 0x0A
+#define ICNL9707_P_CGOUT_GSP8 0x0B
+#define ICNL9707_P_CGOUT_GCK1 0x0C
+#define ICNL9707_P_CGOUT_GCK2 0x0D
+#define ICNL9707_P_CGOUT_GCK3 0x0E
+#define ICNL9707_P_CGOUT_GCK4 0x0F
+#define ICNL9707_P_CGOUT_GCK5 0x10
+#define ICNL9707_P_CGOUT_GCK6 0x11
+#define ICNL9707_P_CGOUT_GCK7 0x12
+#define ICNL9707_P_CGOUT_GCK8 0x13
+#define ICNL9707_P_CGOUT_GCK9 0x14
+#define ICNL9707_P_CGOUT_GCK10 0x15
+#define ICNL9707_P_CGOUT_GCK11 0x16
+#define ICNL9707_P_CGOUT_GCK12 0x17
+#define ICNL9707_P_CGOUT_GCK13 0x18
+#define ICNL9707_P_CGOUT_GCK14 0x19
+#define ICNL9707_P_CGOUT_GCK15 0x1A
+#define ICNL9707_P_CGOUT_GCK16 0x1B
+#define ICNL9707_P_CGOUT_DIR 0x1C
+#define ICNL9707_P_CGOUT_DIRB 0x1D
+#define ICNL9707_P_CGOUT_ECLK_AC 0x1E
+#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F
+#define ICNL9707_P_CGOUT_ECLK_AC2 0x20
+#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21
+#define ICNL9707_P_CGOUT_GCH 0x22
+#define ICNL9707_P_CGOUT_GCL 0x23
+#define ICNL9707_P_CGOUT_XDON 0x24
+#define ICNL9707_P_CGOUT_XDONB 0x25
+
+#define ICNL9707_MADCTL_ML  0x10
+#define ICNL9707_MADCTL_RGB 0x00
+#define ICNL9707_MADCTL_BGR 0x08
+#define ICNL9707_MADCTL_MH  0x04
+
+#define ICNL9707_CMD_PWRCON_VCOM 0xB6
+#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D
+
+#define ICNL9707_CMD_PWRCON_SEQ 0xB7
+#define ICNL9707_CMD_PWRCON_CLK 0xB8
+#define ICNL9707_CMD_PWRCON_BTA 0xB9
+#define ICNL9707_CMD_PWRCON_MODE 0xBA
+#define ICNL9707_CMD_PWRCON_REG 0xBD
+
+#define ICNL9707_CMD_TCON 0xC1
+#define ICNL9707_CMD_TCON2 0xC2
+#define ICNL9707_CMD_TCON3 0xC3
+#define ICNL9707_CMD_SRC_TIM 0xC6
+#define ICNL9707_CMD_SRCCON 0xC7
+#define ICNL9707_CMD_SET_GAMMA 0xC8
+
+#define ICNL9707_CMD_ETC 0xD0
+
+#define ICNL9707_CMD_PASSWORD1 0xF0
+#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5
+#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A
+
+#define ICNL9707_CMD_PASSWORD2 0xF1
+#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A
+#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5
+
+static int cwd686_init_sequence(struct cwd686 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	/* Enable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2);
+
+	/* Set PWRCON_VCOM (-0.495V, -0.495V) */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_VCOM,
+		     ICNL9707_P_PWRCON_VCOM_0495V,
+		     ICNL9707_P_PWRCON_VCOM_0495V);
+
+	/* Map ASG output signals */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTR,
+		     ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
+		     ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
+		     ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTL,
+		     ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
+		     ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
+		     ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
+
+	/* Undocumented commands provided by the vendor */
+	mipi_dsi_dcs_write_seq(dsi, 0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x73);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_REG,
+		     0x4E, 0x0E, 0x50, 0x50, 0x26,
+		     0x1D, 0x00, 0x14, 0x42, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_SEQ,
+		     0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
+		     0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
+		     0x00, 0x00, 0x02, 0xFF, 0x3C);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
+
+	/* Disable abnormal power-off flag */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
+
+	/* Set VBP, VFP, VSW, HBP, HFP, HSW */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
+
+	/* Set resolution */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON2, 0x11, 0x41);
+
+	/* Set frame blanking */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xC5, 0x00);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
+
+	/* Another set of undocumented commands */
+	mipi_dsi_dcs_write_seq(dsi, 0xD2, 0x63, 0x0B, 0x08, 0x88);
+	mipi_dsi_dcs_write_seq(dsi, 0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
+
+	/* Set Gamma to 2.2 */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SET_GAMMA,
+		     0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
+		     0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
+		     0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
+		     0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
+		     0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
+		     0x3B, 0x2A, 0x06);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xF4, 0x08, 0x77);
+
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE,
+		     ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
+
+	/* Enable tearing mode at VBLANK */
+	err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (err) {
+		dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
+		return err;
+	}
+
+	/* Disable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_DEFAULT,
+		     ICNL9707_P_PASSWORD2_DEFAULT);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_DEFAULT,
+		     ICNL9707_P_PASSWORD1_DEFAULT);
+
+	return 0;
+}
+
+static int cwd686_unprepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (!ctx->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_set_display_off(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display off (%d)\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err);
+		return err;
+	}
+
+	msleep(120);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vci);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int cwd686_prepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (ctx->prepared)
+		return 0;
+
+	err = regulator_enable(ctx->vci);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable vci supply: %d\n", err);
+		return err;
+	}
+	err = regulator_enable(ctx->iovcc);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable iovcc supply: %d\n", err);
+		goto disable_vci;
+	}
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	/* T2 */
+	msleep(10);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	/* T3 */
+	msleep(20);
+
+	/* Exit sleep mode and power on */
+
+	err = cwd686_init_sequence(ctx);
+	if (err) {
+		dev_err(ctx->dev, "failed to initialize display (%d)\n", err);
+		goto disable_iovcc;
+	}
+
+	err = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err);
+		goto disable_iovcc;
+	}
+	/* T6 */
+	msleep(120);
+
+	err = mipi_dsi_dcs_set_display_on(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display on (%d)\n", err);
+		goto disable_iovcc;
+	}
+	msleep(20);
+
+	ctx->prepared = true;
+
+	return 0;
+disable_iovcc:
+	regulator_disable(ctx->iovcc);
+disable_vci:
+	regulator_disable(ctx->vci);
+	return err;
+}
+
+static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "bad mode or failed to add mode\n");
+		return -EINVAL;
+	}
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	/* Set up connector's "panel orientation" property */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs cwd686_drm_funcs = {
+	.unprepare = cwd686_unprepare,
+	.prepare = cwd686_prepare,
+	.get_modes = cwd686_get_modes,
+};
+
+static int cwd686_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct cwd686 *ctx;
+	int err;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+			  MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		err = PTR_ERR(ctx->reset_gpio);
+		return dev_err_probe(dev, err, "Failed to request GPIO (%d)\n", err);
+	}
+
+	ctx->vci = devm_regulator_get(dev, "vci");
+	if (IS_ERR(ctx->vci)) {
+		err = PTR_ERR(ctx->vci);
+		return dev_err_probe(dev, err, "Failed to request vci regulator: %d\n", err);
+	}
+
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc)) {
+		err = PTR_ERR(ctx->iovcc);
+		return dev_err_probe(dev, err, "Failed to request iovcc regulator: %d\n", err);
+	}
+
+	err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (err) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
+		return err;
+	}
+
+	drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	err = drm_panel_of_backlight(&ctx->panel);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	err = mipi_dsi_attach(dsi);
+	if (err < 0) {
+		dev_err(dev, "mipi_dsi_attach() failed: %d\n", err);
+		drm_panel_remove(&ctx->panel);
+		return err;
+	}
+
+	return 0;
+}
+
+static void cwd686_remove(struct mipi_dsi_device *dsi)
+{
+	struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id cwd686_of_match[] = {
+	{ .compatible = "clockworkpi,cwd686" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cwd686_of_match);
+
+static struct mipi_dsi_driver cwd686_driver = {
+	.probe = cwd686_probe,
+	.remove = cwd686_remove,
+	.driver = {
+		.name = "panel-clockworkpi-cwd686",
+		.of_match_table = cwd686_of_match,
+	},
+};
+module_mipi_dsi_driver(cwd686_driver);
+
+MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>");
+MODULE_AUTHOR("Max Fierke <max@maxfierke.com>");
+MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver");
+MODULE_LICENSE("GPL");
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel
@ 2022-09-03 18:37   ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: devicetree, Max Fierke, linux-kernel, dri-devel

The ClockworkPi DevTerm (all models) uses a 6.86" IPS display
of unknown provenance, which uses the Chipone ICNL9707 IC driver.

The display panel I have has two model numbers: TXW686001 and WTL068601G,
but cannot find any manufacturer associated with either, so opting for the
ClockworkPi model number.

This driver is based on the GPL-licensed driver released by ClockworkPi,
authored by Pinfan Zhu, with some additional cleanup, rotation support,
and display sleep re-enabling done by me.

Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch
Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf

Signed-off-by: Max Fierke <max@maxfierke.com>
---
Changes in v2: (Sam Ravnborg's suggestions)
 - remove some unused properties from definition (e.g. enable_gpio, supply)
 - add missing regulators
 - reorder includes
 - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight
 - remove now-unneeded ctx->enabled and enable/disable hooks
 - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq
 - use dev_err_probe instead of checking EPROBE_DEFER
 - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver

 drivers/gpu/drm/panel/Kconfig                 |  12 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-clockworkpi-cwd686.c  | 445 ++++++++++++++++++
 3 files changed, 458 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 584a69f99af6..a93c697867f9 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6
 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
 	  45NA WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_CLOCKWORKPI_CWD686
+	tristate "ClockworkPi CWD686 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the ClockworkPi CWD686
+	  ICNL9707-based panel, e.g. as used within the ClockworkPi DevTerm.
+	  The panel has a 480x1280 resolution and uses 24 bit RGB per pixel.
+
+	  To compile this driver as a module, choose M here.
+
 config DRM_PANEL_DSI_CM
 	tristate "Generic DSI command mode panels"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 34e717382dbb..6c3ed2acaa6b 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
 obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_CLOCKWORKPI_CWD686) += panel-clockworkpi-cwd686.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
new file mode 100644
index 000000000000..87d20d784596
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Clockwork Tech LLC
+ * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com>
+ *
+ * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+struct cwd686 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct regulator *vci;
+	struct regulator *iovcc;
+	struct gpio_desc *reset_gpio;
+	enum drm_panel_orientation orientation;
+	bool prepared;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 54465,
+	.hdisplay = 480,
+	.hsync_start = 480 + 150,
+	.hsync_end = 480 + 150 + 24,
+	.htotal = 480 + 150 + 24 + 40,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 12,
+	.vsync_end = 1280 + 12 + 6,
+	.vtotal = 1280 + 12 + 6 + 10,
+};
+
+static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
+{
+	return container_of(panel, struct cwd686, panel);
+}
+
+#define ICNL9707_CMD_CGOUTL 0xB3
+#define ICNL9707_CMD_CGOUTR 0xB4
+#define ICNL9707_P_CGOUT_VGL 0x00
+#define ICNL9707_P_CGOUT_VGH 0x01
+#define ICNL9707_P_CGOUT_HZ 0x02
+#define ICNL9707_P_CGOUT_GND 0x03
+#define ICNL9707_P_CGOUT_GSP1 0x04
+#define ICNL9707_P_CGOUT_GSP2 0x05
+#define ICNL9707_P_CGOUT_GSP3 0x06
+#define ICNL9707_P_CGOUT_GSP4 0x07
+#define ICNL9707_P_CGOUT_GSP5 0x08
+#define ICNL9707_P_CGOUT_GSP6 0x09
+#define ICNL9707_P_CGOUT_GSP7 0x0A
+#define ICNL9707_P_CGOUT_GSP8 0x0B
+#define ICNL9707_P_CGOUT_GCK1 0x0C
+#define ICNL9707_P_CGOUT_GCK2 0x0D
+#define ICNL9707_P_CGOUT_GCK3 0x0E
+#define ICNL9707_P_CGOUT_GCK4 0x0F
+#define ICNL9707_P_CGOUT_GCK5 0x10
+#define ICNL9707_P_CGOUT_GCK6 0x11
+#define ICNL9707_P_CGOUT_GCK7 0x12
+#define ICNL9707_P_CGOUT_GCK8 0x13
+#define ICNL9707_P_CGOUT_GCK9 0x14
+#define ICNL9707_P_CGOUT_GCK10 0x15
+#define ICNL9707_P_CGOUT_GCK11 0x16
+#define ICNL9707_P_CGOUT_GCK12 0x17
+#define ICNL9707_P_CGOUT_GCK13 0x18
+#define ICNL9707_P_CGOUT_GCK14 0x19
+#define ICNL9707_P_CGOUT_GCK15 0x1A
+#define ICNL9707_P_CGOUT_GCK16 0x1B
+#define ICNL9707_P_CGOUT_DIR 0x1C
+#define ICNL9707_P_CGOUT_DIRB 0x1D
+#define ICNL9707_P_CGOUT_ECLK_AC 0x1E
+#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F
+#define ICNL9707_P_CGOUT_ECLK_AC2 0x20
+#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21
+#define ICNL9707_P_CGOUT_GCH 0x22
+#define ICNL9707_P_CGOUT_GCL 0x23
+#define ICNL9707_P_CGOUT_XDON 0x24
+#define ICNL9707_P_CGOUT_XDONB 0x25
+
+#define ICNL9707_MADCTL_ML  0x10
+#define ICNL9707_MADCTL_RGB 0x00
+#define ICNL9707_MADCTL_BGR 0x08
+#define ICNL9707_MADCTL_MH  0x04
+
+#define ICNL9707_CMD_PWRCON_VCOM 0xB6
+#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D
+
+#define ICNL9707_CMD_PWRCON_SEQ 0xB7
+#define ICNL9707_CMD_PWRCON_CLK 0xB8
+#define ICNL9707_CMD_PWRCON_BTA 0xB9
+#define ICNL9707_CMD_PWRCON_MODE 0xBA
+#define ICNL9707_CMD_PWRCON_REG 0xBD
+
+#define ICNL9707_CMD_TCON 0xC1
+#define ICNL9707_CMD_TCON2 0xC2
+#define ICNL9707_CMD_TCON3 0xC3
+#define ICNL9707_CMD_SRC_TIM 0xC6
+#define ICNL9707_CMD_SRCCON 0xC7
+#define ICNL9707_CMD_SET_GAMMA 0xC8
+
+#define ICNL9707_CMD_ETC 0xD0
+
+#define ICNL9707_CMD_PASSWORD1 0xF0
+#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5
+#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A
+
+#define ICNL9707_CMD_PASSWORD2 0xF1
+#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A
+#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5
+
+static int cwd686_init_sequence(struct cwd686 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	/* Enable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2);
+
+	/* Set PWRCON_VCOM (-0.495V, -0.495V) */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_VCOM,
+		     ICNL9707_P_PWRCON_VCOM_0495V,
+		     ICNL9707_P_PWRCON_VCOM_0495V);
+
+	/* Map ASG output signals */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTR,
+		     ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
+		     ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
+		     ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTL,
+		     ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
+		     ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
+		     ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
+
+	/* Undocumented commands provided by the vendor */
+	mipi_dsi_dcs_write_seq(dsi, 0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x73);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_REG,
+		     0x4E, 0x0E, 0x50, 0x50, 0x26,
+		     0x1D, 0x00, 0x14, 0x42, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_SEQ,
+		     0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
+		     0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
+		     0x00, 0x00, 0x02, 0xFF, 0x3C);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
+
+	/* Disable abnormal power-off flag */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
+
+	/* Set VBP, VFP, VSW, HBP, HFP, HSW */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
+
+	/* Set resolution */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON2, 0x11, 0x41);
+
+	/* Set frame blanking */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xC5, 0x00);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
+
+	/* Another set of undocumented commands */
+	mipi_dsi_dcs_write_seq(dsi, 0xD2, 0x63, 0x0B, 0x08, 0x88);
+	mipi_dsi_dcs_write_seq(dsi, 0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
+
+	/* Set Gamma to 2.2 */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SET_GAMMA,
+		     0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
+		     0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
+		     0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
+		     0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
+		     0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
+		     0x3B, 0x2A, 0x06);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xF4, 0x08, 0x77);
+
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE,
+		     ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
+
+	/* Enable tearing mode at VBLANK */
+	err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (err) {
+		dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
+		return err;
+	}
+
+	/* Disable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_DEFAULT,
+		     ICNL9707_P_PASSWORD2_DEFAULT);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_DEFAULT,
+		     ICNL9707_P_PASSWORD1_DEFAULT);
+
+	return 0;
+}
+
+static int cwd686_unprepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (!ctx->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_set_display_off(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display off (%d)\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err);
+		return err;
+	}
+
+	msleep(120);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vci);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int cwd686_prepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (ctx->prepared)
+		return 0;
+
+	err = regulator_enable(ctx->vci);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable vci supply: %d\n", err);
+		return err;
+	}
+	err = regulator_enable(ctx->iovcc);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable iovcc supply: %d\n", err);
+		goto disable_vci;
+	}
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	/* T2 */
+	msleep(10);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	/* T3 */
+	msleep(20);
+
+	/* Exit sleep mode and power on */
+
+	err = cwd686_init_sequence(ctx);
+	if (err) {
+		dev_err(ctx->dev, "failed to initialize display (%d)\n", err);
+		goto disable_iovcc;
+	}
+
+	err = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err);
+		goto disable_iovcc;
+	}
+	/* T6 */
+	msleep(120);
+
+	err = mipi_dsi_dcs_set_display_on(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display on (%d)\n", err);
+		goto disable_iovcc;
+	}
+	msleep(20);
+
+	ctx->prepared = true;
+
+	return 0;
+disable_iovcc:
+	regulator_disable(ctx->iovcc);
+disable_vci:
+	regulator_disable(ctx->vci);
+	return err;
+}
+
+static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "bad mode or failed to add mode\n");
+		return -EINVAL;
+	}
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	/* Set up connector's "panel orientation" property */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs cwd686_drm_funcs = {
+	.unprepare = cwd686_unprepare,
+	.prepare = cwd686_prepare,
+	.get_modes = cwd686_get_modes,
+};
+
+static int cwd686_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct cwd686 *ctx;
+	int err;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+			  MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		err = PTR_ERR(ctx->reset_gpio);
+		return dev_err_probe(dev, err, "Failed to request GPIO (%d)\n", err);
+	}
+
+	ctx->vci = devm_regulator_get(dev, "vci");
+	if (IS_ERR(ctx->vci)) {
+		err = PTR_ERR(ctx->vci);
+		return dev_err_probe(dev, err, "Failed to request vci regulator: %d\n", err);
+	}
+
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc)) {
+		err = PTR_ERR(ctx->iovcc);
+		return dev_err_probe(dev, err, "Failed to request iovcc regulator: %d\n", err);
+	}
+
+	err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (err) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
+		return err;
+	}
+
+	drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	err = drm_panel_of_backlight(&ctx->panel);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	err = mipi_dsi_attach(dsi);
+	if (err < 0) {
+		dev_err(dev, "mipi_dsi_attach() failed: %d\n", err);
+		drm_panel_remove(&ctx->panel);
+		return err;
+	}
+
+	return 0;
+}
+
+static void cwd686_remove(struct mipi_dsi_device *dsi)
+{
+	struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id cwd686_of_match[] = {
+	{ .compatible = "clockworkpi,cwd686" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cwd686_of_match);
+
+static struct mipi_dsi_driver cwd686_driver = {
+	.probe = cwd686_probe,
+	.remove = cwd686_remove,
+	.driver = {
+		.name = "panel-clockworkpi-cwd686",
+		.of_match_table = cwd686_of_match,
+	},
+};
+module_mipi_dsi_driver(cwd686_driver);
+
+MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>");
+MODULE_AUTHOR("Max Fierke <max@maxfierke.com>");
+MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver");
+MODULE_LICENSE("GPL");
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback
  2022-09-03 18:37 ` Max Fierke
@ 2022-09-03 18:37   ` Max Fierke
  -1 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel, Max Fierke

Returns the panel's configured orientation

Signed-off-by: Max Fierke <max@maxfierke.com>
---
Changes in v2:
 - this was added as .get_orientation is now available in drm-misc-next since v1

 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
index 87d20d784596..2c433a458c8b 100644
--- a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
+++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
@@ -340,7 +340,10 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne
 	drm_mode_set_name(mode);
 	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 
-	/* Set up connector's "panel orientation" property */
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	drm_mode_probed_add(connector, mode);
@@ -348,10 +351,18 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne
 	return 1; /* Number of modes */
 }
 
+static enum drm_panel_orientation cwd686_get_orientation(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs cwd686_drm_funcs = {
 	.unprepare = cwd686_unprepare,
 	.prepare = cwd686_prepare,
 	.get_modes = cwd686_get_modes,
+	.get_orientation = cwd686_get_orientation,
 };
 
 static int cwd686_probe(struct mipi_dsi_device *dsi)
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback
@ 2022-09-03 18:37   ` Max Fierke
  0 siblings, 0 replies; 12+ messages in thread
From: Max Fierke @ 2022-09-03 18:37 UTC (permalink / raw)
  To: thierry.reding, sam, airlied, daniel, robh+dt, krzysztof.kozlowski+dt
  Cc: devicetree, Max Fierke, linux-kernel, dri-devel

Returns the panel's configured orientation

Signed-off-by: Max Fierke <max@maxfierke.com>
---
Changes in v2:
 - this was added as .get_orientation is now available in drm-misc-next since v1

 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
index 87d20d784596..2c433a458c8b 100644
--- a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
+++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
@@ -340,7 +340,10 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne
 	drm_mode_set_name(mode);
 	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 
-	/* Set up connector's "panel orientation" property */
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
 	drm_connector_set_panel_orientation(connector, ctx->orientation);
 
 	drm_mode_probed_add(connector, mode);
@@ -348,10 +351,18 @@ static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *conne
 	return 1; /* Number of modes */
 }
 
+static enum drm_panel_orientation cwd686_get_orientation(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+
+	return ctx->orientation;
+}
+
 static const struct drm_panel_funcs cwd686_drm_funcs = {
 	.unprepare = cwd686_unprepare,
 	.prepare = cwd686_prepare,
 	.get_modes = cwd686_get_modes,
+	.get_orientation = cwd686_get_orientation,
 };
 
 static int cwd686_probe(struct mipi_dsi_device *dsi)
-- 
2.37.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel
  2022-09-03 18:37   ` Max Fierke
@ 2022-09-04 19:08     ` Krzysztof Kozlowski
  -1 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-04 19:08 UTC (permalink / raw)
  To: Max Fierke, thierry.reding, sam, airlied, daniel, robh+dt,
	krzysztof.kozlowski+dt
  Cc: dri-devel, devicetree, linux-kernel

On 03/09/2022 21:37, Max Fierke wrote:
> The CWD686 is a 6.86" IPS LCD panel used as the primary
> display in the ClockworkPi DevTerm portable (all cores)
> 
> Signed-off-by: Max Fierke <max@maxfierke.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions)
>  - remove redundant backlight example
>  - add missing regulators
> 
>  .../display/panel/clockworkpi,cwd686.yaml     | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> new file mode 100644
> index 000000000000..eaf55d629266
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ClockworkPi CWD686 6.86" IPS LCD panel
> +
> +maintainers:
> +  - Max Fierke <max@maxfierke.com>
> +
> +description: |
> +  The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
> +  ClockworkPi DevTerm series of portable devices. The panel has a 480x1280
> +  resolution and uses 24 bit RGB per pixel.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: clockworkpi,cwd686
> +
> +  reg:
> +    description: DSI virtual channel used by that screen
> +    maxItems: 1

You still need blank line here.

> +  iovcc-supply:
> +    description: regulator that supplies the iovcc voltage

And here...

> +  vci-supply:
> +    description: regulator that supplies the vci voltage
> +


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel
@ 2022-09-04 19:08     ` Krzysztof Kozlowski
  0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-04 19:08 UTC (permalink / raw)
  To: Max Fierke, thierry.reding, sam, airlied, daniel, robh+dt,
	krzysztof.kozlowski+dt
  Cc: devicetree, linux-kernel, dri-devel

On 03/09/2022 21:37, Max Fierke wrote:
> The CWD686 is a 6.86" IPS LCD panel used as the primary
> display in the ClockworkPi DevTerm portable (all cores)
> 
> Signed-off-by: Max Fierke <max@maxfierke.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes in v2 (Krzysztof Kozlowski and Rob Herring's Suggestions)
>  - remove redundant backlight example
>  - add missing regulators
> 
>  .../display/panel/clockworkpi,cwd686.yaml     | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> new file mode 100644
> index 000000000000..eaf55d629266
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ClockworkPi CWD686 6.86" IPS LCD panel
> +
> +maintainers:
> +  - Max Fierke <max@maxfierke.com>
> +
> +description: |
> +  The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the
> +  ClockworkPi DevTerm series of portable devices. The panel has a 480x1280
> +  resolution and uses 24 bit RGB per pixel.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: clockworkpi,cwd686
> +
> +  reg:
> +    description: DSI virtual channel used by that screen
> +    maxItems: 1

You still need blank line here.

> +  iovcc-supply:
> +    description: regulator that supplies the iovcc voltage

And here...

> +  vci-supply:
> +    description: regulator that supplies the vci voltage
> +


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-09-05  6:30 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-03 18:37 [PATCH v2 0/4] Introduce ClockworkPi CWD686 DRM panel driver Max Fierke
2022-09-03 18:37 ` Max Fierke
2022-09-03 18:37 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi Max Fierke
2022-09-03 18:37   ` Max Fierke
2022-09-03 18:37 ` [PATCH v2 2/4] dt-bindings: display: Add ClockworkPi CWD686 panel Max Fierke
2022-09-03 18:37   ` Max Fierke
2022-09-04 19:08   ` Krzysztof Kozlowski
2022-09-04 19:08     ` Krzysztof Kozlowski
2022-09-03 18:37 ` [PATCH v2 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel Max Fierke
2022-09-03 18:37   ` Max Fierke
2022-09-03 18:37 ` [PATCH v2 4/4] drm/panel: clockworkpi-cwd686: Implement .get_orientation callback Max Fierke
2022-09-03 18:37   ` Max Fierke

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.