From: Sven Luther <sven.luther@wanadoo.fr>
To: Marcus Barrow <mbarrow@sangate.com>
Cc: Sven Luther <sven.luther@wanadoo.fr>, linuxppc-dev@lists.linuxppc.org
Subject: Re: multiple separate pci bridges ...
Date: Tue, 6 Jan 2004 08:14:12 +0100 [thread overview]
Message-ID: <20040106071412.GB735@iliana> (raw)
In-Reply-To: <1073338730.9456.2487.camel@boat.sangate.com>
On Mon, Jan 05, 2004 at 04:38:50PM -0500, Marcus Barrow wrote:
>
> Hi Sven:
>
> I think there is some basic brokeness in the Discovery
> specific code. I've been meaning to go and look at some
> of the original code, to see if some stuff was left on
> the floor.
Mmm. What code are you speaking about here ?
> On our evalution boards the P2P registers are not set
> up. So you indeed have two PCI bus 0. The P2P register
> for PCI bus 1 should be initialized to identify it as
> bus 1, or whatever the right value is considering
> any more bridges found on bus 0.
Mmm, i understand that the 2.6.x pci domain will make this not
necessary. I might be wrong though.
> If you insert pci cards which contain bridges on them,
> they only work on the bus 0 slots...
bus 1 is used as an agp bus anyway, and i doubt there are many agp
graphic cards out there with pci bridges on them. When i inserted my
Appian Jeronimo 2000 in that board, it refused to powerup at all, but
then, maybe it is drawing too much power or something. After all, it has
a 3dlabs gamma and two permedia3 on it.
> Do you have something like ppcboot or uboot starting
> your system or just a kernel? If you are using a real
Well, there is a customized SmartFirmware OpenFirmware on the board. I
even have (non-free though) access to the source of it. The board is
mostly a CHRP design.
> boot rom, you could try initializing the p2p registers
> by hand, then booting...
The Firmware guy told me don't touch it though.
> I'm hoping to work on this in the next few days.
Ok, great.
Friendly,
Sven Luther
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-01-06 7:14 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-01 18:11 multiple separate pci bridges Sven Luther
2004-01-02 4:03 ` Benjamin Herrenschmidt
2004-01-02 7:40 ` Sven Luther
2004-01-02 7:49 ` Benjamin Herrenschmidt
2004-01-04 21:03 ` Sven Luther
2004-01-04 21:45 ` Benjamin Herrenschmidt
2004-01-04 22:06 ` Sven Luther
2004-01-05 16:40 ` Sven Luther
2004-01-05 21:28 ` Benjamin Herrenschmidt
2004-01-05 21:42 ` Sven Luther
2004-01-05 22:12 ` Benjamin Herrenschmidt
2004-01-06 7:39 ` Sven Luther
2004-01-06 8:00 ` Benjamin Herrenschmidt
2004-01-06 8:11 ` Sven Luther
2004-01-06 14:40 ` Geert Uytterhoeven
2004-01-06 14:45 ` Sven Luther
2004-01-06 15:33 ` Rob Baxter
2004-01-06 17:44 ` Sven Luther
2004-01-06 21:37 ` Benjamin Herrenschmidt
2004-01-06 22:10 ` Marcus Barrow
2004-01-06 22:17 ` Rob Baxter
2004-01-06 22:31 ` Benjamin Herrenschmidt
2004-01-07 2:35 ` Sven Luther
2004-01-07 2:36 ` Benjamin Herrenschmidt
2004-01-07 2:40 ` Sven Luther
2004-01-07 9:02 ` Michael Schmitz
2004-01-07 9:23 ` Benjamin Herrenschmidt
2004-01-07 9:56 ` Sven Luther
2004-01-07 10:27 ` Michael Schmitz
2004-01-13 9:56 ` Sven Luther
2004-01-13 10:26 ` Sven Luther
2004-01-18 12:15 ` Sven Luther
2004-01-18 13:00 ` Michel Dänzer
2004-01-18 13:14 ` Sven Luther
2004-01-19 9:12 ` Benjamin Herrenschmidt
2004-01-18 22:27 ` Sven Luther
2004-01-18 22:59 ` Benjamin Herrenschmidt
2004-01-19 9:21 ` Sven Luther
2004-01-18 23:24 ` Benjamin Herrenschmidt
2004-01-05 21:38 ` Marcus Barrow
2004-01-06 7:14 ` Sven Luther [this message]
2004-01-06 7:56 ` Benjamin Herrenschmidt
2004-01-06 8:20 ` Sven Luther
2004-01-02 18:34 ` Geert Uytterhoeven
2004-01-02 15:18 ` Rob Baxter
2004-01-02 23:56 ` Benjamin Herrenschmidt
2004-01-03 0:27 ` Rob Baxter
2004-01-03 1:12 ` Benjamin Herrenschmidt
2004-01-05 0:52 ` Rob Baxter
2004-01-05 2:13 ` Benjamin Herrenschmidt
2004-01-06 20:53 Marcus Barrow
2004-01-06 21:09 Marcus Barrow
2004-01-06 22:59 ` Benjamin Herrenschmidt
2004-01-06 23:00 ` Benjamin Herrenschmidt
2004-01-18 14:44 Sven Luther
2004-01-18 16:33 ` Michel Dänzer
2004-01-18 17:28 ` Sven Luther
2004-01-18 18:24 ` Michel Dänzer
2004-01-18 22:20 ` Sven Luther
2004-01-18 23:33 ` Michel Dänzer
2004-01-19 9:55 ` Sven Luther
2004-01-19 13:48 ` Sven Luther
2004-01-19 13:54 ` Geert Uytterhoeven
2004-01-19 14:00 ` Sven Luther
2004-01-19 14:02 ` Michel Dänzer
2004-01-19 14:16 ` Sven Luther
2004-01-19 14:31 ` Michel Dänzer
2004-01-19 9:11 ` Benjamin Herrenschmidt
2004-01-18 22:33 ` Sven Luther
2004-01-18 23:23 ` Michel Dänzer
2004-01-18 23:42 ` Benjamin Herrenschmidt
2004-01-19 0:03 ` Michel Dänzer
2004-01-19 10:08 ` Geert Uytterhoeven
2004-01-19 11:41 ` Benjamin Herrenschmidt
2004-01-19 12:03 ` Sven Luther
2004-01-19 21:35 ` Benjamin Herrenschmidt
2004-01-19 22:08 ` Sven Luther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040106071412.GB735@iliana \
--to=sven.luther@wanadoo.fr \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=mbarrow@sangate.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.