* [U-Boot-Users] Can I load u-boot to my board?
@ 2004-11-09 6:28 duo dong
2004-11-09 20:07 ` Wolfgang Denk
0 siblings, 1 reply; 4+ messages in thread
From: duo dong @ 2004-11-09 6:28 UTC (permalink / raw)
To: u-boot
The board on my hand is SBC8260 from EST corp. The
JTAG comes with this board is VisionProbe II from
WindRiver. The board has been used for VxWorks.
I search the web and can not find any tech inforamtion
about this JTAG. No support information on the web for
linux usage too.
I use ELDK to build u-boot for sbc8200, but not sure
if it works on this board.
Is there any way I can load u-boot to this board?
Thanks,
DD
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] Can I load u-boot to my board?
2004-11-09 6:28 [U-Boot-Users] Can I load u-boot to my board? duo dong
@ 2004-11-09 20:07 ` Wolfgang Denk
2004-11-09 20:33 ` duo dong
0 siblings, 1 reply; 4+ messages in thread
From: Wolfgang Denk @ 2004-11-09 20:07 UTC (permalink / raw)
To: u-boot
In message <20041109062856.76466.qmail@web54409.mail.yahoo.com> you wrote:
> The board on my hand is SBC8260 from EST corp. The
> JTAG comes with this board is VisionProbe II from
Actually the JTAG or rather the COP port on the boards is standard.
Your VisionProbe tool is a different issue.
> I search the web and can not find any tech inforamtion
> about this JTAG. No support information on the web for
Search again. Ask the vendor.
> I use ELDK to build u-boot for sbc8200, but not sure
> if it works on this board.
Sure it does.
Guess what the "sbc8260" board configuration is good for?
> Is there any way I can load u-boot to this board?
Sure. I could tell you how to do it with a BDI2000. Sorry, never used
a VisionProbe ...
Best regards,
Wolfgang Denk
--
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Stupidity, like virtue, is its own reward" - William E. Davidsen
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] Can I load u-boot to my board?
2004-11-09 20:07 ` Wolfgang Denk
@ 2004-11-09 20:33 ` duo dong
2004-11-09 22:19 ` Wolfgang Denk
0 siblings, 1 reply; 4+ messages in thread
From: duo dong @ 2004-11-09 20:33 UTC (permalink / raw)
To: u-boot
Sorry for the typo. The sbc8200 should be sbc8260.
DD
Wolfgang Denk <wd@denx.de> wrote:
In message <20041109062856.76466.qmail@web54409.mail.yahoo.com> you wrote:
> The board on my hand is SBC8260 from EST corp. The
> JTAG comes with this board is VisionProbe II from
Actually the JTAG or rather the COP port on the boards is standard.
Your VisionProbe tool is a different issue.
> I search the web and can not find any tech inforamtion
> about this JTAG. No support information on the web for
Search again. Ask the vendor.
> I use ELDK to build u-boot for sbc8200, but not sure
> if it works on this board.
It should be sbc8260.
Sure it does.
Guess what the "sbc8260" board configuration is good for?
> Is there any way I can load u-boot to this board?
Sure. I could tell you how to do it with a BDI2000. Sorry, never used
a VisionProbe ...
The issue is I do not have BDI2000 on hand.
Best regards,
Wolfgang Denk
--
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Stupidity, like virtue, is its own reward" - William E. Davidsen
---------------------------------
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20041109/975c3913/attachment.htm
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] Can I load u-boot to my board?
2004-11-09 20:33 ` duo dong
@ 2004-11-09 22:19 ` Wolfgang Denk
0 siblings, 0 replies; 4+ messages in thread
From: Wolfgang Denk @ 2004-11-09 22:19 UTC (permalink / raw)
To: u-boot
In message <20041109203323.50959.qmail@web54404.mail.yahoo.com> you wrote:
>
> Sorry for the typo. The sbc8200 should be sbc8260.
Yes. Did you actually read what I wrote???
> It should be sbc8260.
Yes. Please read again:
> Sure it does.
>
> Guess what the "sbc8260" board configuration is good for?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Do you get it?
> --0-608062285-1100032403=:47764
> Content-Type: text/html; charset=us-ascii
>
> <DIV>Sorry for the typo. The sbc8200 should be sbc8260.</DIV>
PLEASE DO NOT POST HTML TO THIS LIST!
Best regards,
Wolfgang Denk
--
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Where there's no emotion, there's no motive for violence.
-- Spock, "Dagger of the Mind", stardate 2715.1
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-11-09 22:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-11-09 6:28 [U-Boot-Users] Can I load u-boot to my board? duo dong
2004-11-09 20:07 ` Wolfgang Denk
2004-11-09 20:33 ` duo dong
2004-11-09 22:19 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.