From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Alan <alan@lxorguk.ukuu.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Arnd Bergmann <arnd@arndb.de>,
Linas Vepstas <linas@austin.ibm.com>,
Jens Osterkamp <jens@de.ibm.com>,
linuxppc-dev@ozlabs.org, Jeff Garzik <jeff@garzik.org>,
linux-ide@vger.kernel.org, paulus@samba.org,
Andrew Morton <akpm@linux-foundation.org>,
James K Lewis <jim@jklewis.com>
Subject: Re: [PATCHSET] libata: PATA driver for Celleb
Date: Tue, 20 Feb 2007 00:17:32 +0100 [thread overview]
Message-ID: <200702200017.32924.bzolnier@gmail.com> (raw)
In-Reply-To: <20070219234651.4a19a912@localhost.localdomain>
On Tuesday 20 February 2007 00:46, Alan wrote:
> > > into one in drivers/ide but really want splitting for libata with some
> > > kind of libata-pmac owning the shared stuff
> >
> > You meand driver/ide/ppc/pmac.c ?
>
> Yes
>
> > moving them out of the macio_asic to a PCI device at one point, so yes,
> > maybe you are right, I should move the DMA bits to some "common" file
> > and split the various implementations.
>
> I suspect it is worth doing when moving to libata at least, even if not
> for the older driver.
fully agreed, the way to go for both drivers
Bart
WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Alan <alan@lxorguk.ukuu.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>, Jeff Garzik <jeff@garzik.org>,
linux-ide@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulus@samba.org, Andrew Morton <akpm@linux-foundation.org>,
James K Lewis <jim@jklewis.com>
Subject: Re: [PATCHSET] libata: PATA driver for Celleb
Date: Tue, 20 Feb 2007 00:17:32 +0100 [thread overview]
Message-ID: <200702200017.32924.bzolnier@gmail.com> (raw)
In-Reply-To: <20070219234651.4a19a912@localhost.localdomain>
On Tuesday 20 February 2007 00:46, Alan wrote:
> > > into one in drivers/ide but really want splitting for libata with some
> > > kind of libata-pmac owning the shared stuff
> >
> > You meand driver/ide/ppc/pmac.c ?
>
> Yes
>
> > moving them out of the macio_asic to a PCI device at one point, so yes,
> > maybe you are right, I should move the DMA bits to some "common" file
> > and split the various implementations.
>
> I suspect it is worth doing when moving to libata at least, even if not
> for the older driver.
fully agreed, the way to go for both drivers
Bart
next prev parent reply other threads:[~2007-02-19 23:11 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-26 7:24 [PATCHSET] libata: PATA driver for Celleb Akira Iguchi
2007-01-26 7:46 ` Jeff Garzik
2007-01-26 7:46 ` Jeff Garzik
2007-02-14 5:19 ` Akira Iguchi
2007-02-14 5:19 ` Akira Iguchi
[not found] ` <200702140518.l1E5IoWX010896@toshiba.co.jp>
2007-02-14 5:29 ` Benjamin Herrenschmidt
2007-02-14 5:29 ` Benjamin Herrenschmidt
2007-02-15 5:07 ` Jeff Garzik
2007-02-15 5:07 ` Jeff Garzik
2007-02-15 7:52 ` Benjamin Herrenschmidt
2007-02-15 7:52 ` Benjamin Herrenschmidt
2007-02-15 10:41 ` Jens Osterkamp
2007-02-15 10:41 ` Jens Osterkamp
2007-02-15 16:03 ` Jim Lewis
2007-02-15 17:14 ` Linas Vepstas
2007-02-15 17:14 ` Linas Vepstas
2007-02-15 18:09 ` Arnd Bergmann
2007-02-15 18:09 ` Arnd Bergmann
2007-02-15 19:11 ` Linas Vepstas
2007-02-15 19:11 ` Linas Vepstas
2007-02-19 21:56 ` Alan
2007-02-19 21:56 ` Alan
2007-02-19 21:21 ` Benjamin Herrenschmidt
2007-02-19 21:21 ` Benjamin Herrenschmidt
2007-02-19 23:46 ` Alan
2007-02-19 23:46 ` Alan
2007-02-19 23:17 ` Bartlomiej Zolnierkiewicz [this message]
2007-02-19 23:17 ` Bartlomiej Zolnierkiewicz
2007-02-19 23:28 ` Benjamin Herrenschmidt
2007-02-19 23:28 ` Benjamin Herrenschmidt
2007-02-19 23:18 ` Benjamin Herrenschmidt
2007-02-19 23:18 ` Benjamin Herrenschmidt
2007-02-19 21:43 ` Benjamin Herrenschmidt
2007-02-19 21:43 ` Benjamin Herrenschmidt
2007-02-20 8:14 ` Geert Uytterhoeven
2007-02-20 8:14 ` Geert Uytterhoeven
2007-02-15 20:46 ` Benjamin Herrenschmidt
2007-02-15 20:46 ` Benjamin Herrenschmidt
2007-02-16 0:18 ` [PATCHSET] spidernet, sungem_phy: consolidated patch series Linas Vepstas
2007-02-16 0:18 ` Linas Vepstas
2007-02-16 0:43 ` [PATCH 1/12]: sungem_phy: support bcm5461 phy, autoneg Linas Vepstas
2007-02-16 0:44 ` [PATCH 2/12]: spidernet: compile break Linas Vepstas
2007-02-16 0:45 ` [PATCH 3/12] spidernet: autoneg support for Celleb Linas Vepstas
2007-02-16 0:46 ` [PATCH 4/12] spidernet: load firmware when open Linas Vepstas
2007-02-16 0:48 ` [PATCH 5/12] spidernet: spidernet: add support for Celleb Linas Vepstas
2007-02-16 0:49 ` [PATCH 6/12] spidernet: remove txram full logging Linas Vepstas
2007-02-16 0:50 ` [PATCH 7/12] spidernet: move medium variable into card struct Linas Vepstas
2007-02-16 0:52 ` [PATCH 8/12] Spidernet: separate hardware state from driver state Linas Vepstas
2007-02-16 0:53 ` [PATCH: 9/12]: spidernet: fix racy double-free of skb Linas Vepstas
2007-02-16 0:55 ` [PATCH 10/12] spidernet: transmit race Linas Vepstas
2007-02-16 0:57 ` [PATCH 11/12] spidernet: janitorial, typos Linas Vepstas
2007-02-16 0:58 ` [PATCH 12/12]: spidernet: maintainership Linas Vepstas
2007-02-16 14:46 ` [PATCH 1/12]: sungem_phy: support bcm5461 phy, autoneg Arnd Bergmann
2007-02-16 16:19 ` Linas Vepstas
2007-02-15 5:12 ` spidernet (was Re: [PATCHSET] libata: PATA driver for Celleb) Jeff Garzik
2007-02-15 5:12 ` Jeff Garzik
2007-02-15 7:52 ` Benjamin Herrenschmidt
2007-02-15 7:52 ` Benjamin Herrenschmidt
2007-01-26 7:24 [PATCHSET] libata: PATA driver for Celleb Akira Iguchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702200017.32924.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=jeff@garzik.org \
--cc=jens@de.ibm.com \
--cc=jim@jklewis.com \
--cc=linas@austin.ibm.com \
--cc=linux-ide@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.